#building-and-recc-chat
1 messages · Page 1260 of 1
What sound is it making?
yes it dses
what indicator is it showing?
idk, last night before i got off i heard it got louder for a small period of time (the pump) but i was idle so i was a bit confused
but i just got off afterwards
so I did try flashing the mobo with a formatted usb with the update software inside the usb. Flashing the mobo with no cpu, ram installed light indicator on mobo turn green flash for 3 second and the light freeze and stay green
green = vga right?
After looking it up apparently there’s been a couple of noise issues with this AIO
that LED light indicator is green by default i think
i mean other than that it's quiet af
my mobo is a b550 asus rog strix wifi
i think i was boosting to 4.9 on firmark all cores at 50c?
i was looking at clock speed tho
How i figured out my fan was i downloaded the GIGABYTE APP and shut off one fan at a time to see which fan it was.. you can do that too, to determine if its an aio fan and which one it is
if it's sticking on green then it's a gpu issue
i have it plugged into cpu_fan
so it's probs just
running at 100%
all the time
Ahh could be running too fast i suppose
Damn my idle temps are loooow, not that it matters
I dont think I have gpu installed when that happen as well
I mean if the noise doesn’t bother you I wouldn’t worry much
i think it's just a sound that the pump makes ngl
Could be
yeah i cant really hear it with headphones
arctic is a good brand anyways
i heard their aios only had like 5 leaks in 3 years?
might be less
idk
Hmm well i guess if it gets worse or concerning id make a ticket or get a new one
ya
You just need the bios file renamed to what they tell you to do in the manual, make sure it's not in any folders too and make sure it's in the flashback usb spot that it says in the manual
Nah it can't run faster than it's rated for through the bios anyway
So Best Buy only has Corsair fans and that stuff, nothing from Phanteks. I can’t order anything because it’s a bank holiday and I can’t transfer anything on my card, if I bought a Corsair rear fan, could i hook it into the 3 front fans or whatever
i think it's just a pump sound tbh
Yeah
i'm still getting used to this aio so idk what to expect or what they're normally supposed to sound like
i trust arctic anyways
kinda wish i went EK though because if there's a leak and it kills your pc, they cover the whole pc
kinda sweet
right ill try that
aren't you getting a new case?
might've been someone else
but you should invest in cable extensions
they're relatively pretty cheap
That is the new case lol
I even tried running the fans up because apparently the more heat the board produces the more electricity it gives out or something
No wait I thought it was a back fan so nvm
ahh okay
I wonder if there’s software that activated it
Because I don’t have Aroura Sync
If I get a rear Corsair case fan, will it be able to be programmed the same as the front if the damn fronts every get working?
depends, if its just a normal fan with fan header, you can make the same but it wont be by default
Oh nice guess
If it has the Corsair proprietary ARGB plug and connects to the Corsair Commander module it should though, right?
Idk, I’m running a Phanteks system and can’t order a fan because I don’t have the money and it’s a bank holiday and I want something now
@fossil cedar
Okey so my rear fan isn’t working because that port is somehow disconnected?
It’s plugged in tho
Made a couple adjustments to the parts list. How’s it look?
https://pcpartpicker.com/list/cdmznL
And apparently my board needs a 3 pin for the front fans to light up
Which I don’t have
I wonder if I can find a 4 pin to 3 pin adapter?
Do you need 32GB of RAM? If so, why not spend $10 more to get CL16?
somethings you can't get atapters for
for example you can't get a ddr3 to ddr4 adapter
that would be cool, but not possible
This needs to be plugged into my mobo but it doesn’t have a 3 pin. Do I need a new motherboard?
I’d like 32GB of RAM, and I can get CL16. I don’t know much about latency stuff
get crucial ballistix
for like 89.99 you can get ddr4 that is 4000Mhz
Thanks
And you don't have to pay for windows
If you really want to get rid of the watermark you can buy a cheaper one from cdkeys something or other
Just get a splitter
Where are you seeing Crucial Ballistix 32GB for $90
I have two splitters in my pc
No, they work, they aren’t lighting up
Are they Corsair?
It’s a brand new out of the box Phanteks P500A
You can literally use a splitter to "plug" two fans into one port
It is the ARGB header he is looking for.
Oh
pcpartpicker
That's 16gb not 32 idt
actually, it was either $90 for 16GB or 32GB
I haven't seen 32 of 4000 anywhere
oh
I'll check, one sec
that's all?
i just found some 5000Mhz one lol
Link?
why ping pato?
There's a single kit of ddr4 5000mhz on pcpartpicker
argb header
i want him to see it lol
And there's no price on it, and it is 16gb
it's that trident z stuff
why stop at 5000
First, thats 16gb, they want 32gb, second, it is 180$
What about this RAM?
Are you set on rgb?
I would like it
What is more important to you. Speed, RGB, or price?
Pick two, you can't have all three.
Scam
Price and speed
Power supply is more money for worse,ram is worse you don't need 32gb for gaming either, especially on your budget, 3050 is looking like a bad gpu and it's not gonna be 250, you dont need to pay for Windows
I might be going crazy, but isn’t that RAM More expensive than the one I sent?
@frank stirrup I don’t have an ARGB header on the board either
$10, but its faster.
B450 Tomahawk Max
i also found a evga 2060 for $120
Column Access Strobe (CAS) latency, or CL, is the delay time of your RAM receiving a command and then being able to issue it. The numbers for the timings will look something like this; 15-17-17-35. Those numbers indicate how many clock cycles it takes for the RAM to respond to the command. However, faster MHz RAM with slower CAS timings might be slower than lower MHz RAM with faster CAS timings.
Lol
If your concern is speed and price, $10 for a lower CL seems reasonable.
Bookmark that link I shared and read it when you feel like sitting down with a cup of coffee.
@summer tusk do this, keyboard is whatever you fancy this is the list i sent you earlier
https://pcpartpicker.com/list/B6CWYg
has 12v rgb but no 5v argb which you need
get a hub/live with no rgb ig
@summer tusk if you can't fit a 3060 in your budget you're better off getting a prebuilt btw
Most days I think I would probably talk myself out of making the purchase if I am selected in shuffle. But today... we will see.
all i did was search graphics cards and put the price range form $0 to $100
Whatcha enter for?
The 3060s under $600 and the 3060ti that is $609
All are good
Better than what I have.
I am not a gamer, really. I played consoles when I was younger, but really haven't played much at all since 2003 or so. I have a Nintendo Wii and did put it down before finishing Skyward Sword.
I'll do a nostalgia tour every now and again and queue up my RetroPie to play old SNES and N64 titles, maybe one or two PSX.
But I started building my first PC in 12/2019. Micro ATX SFF build. It was fun.
That list has evolved, but it had a 1060 6GB EVGA GPU I found on Craigslist for $150 around July last year.
I used it so I could use 2x DisplayPorts.
But I really didn't need it, because I am focused on business and work, local politics, volunteer work...
Btw if you get one of those you'll want a better case probably and probs a new power supply
This is not my current build.
Here is the current one:
https://pcpartpicker.com/list/VtF9j2
You and @frank stirrup have helped tremendously.
Hows the 12600k treating you?
Waiting on the z690 and getting the retention plate for the AIO back still.
It is sitting in its box, next to me still.
I know you do this a lot, but we have been talking since Monday.
I returned the z590, the i5-11600K and the 2x32GB 3200 Crucial vengeance sticks
anyway, I started about a month ago on this new build and with the z590 having HDMI and DisplayPort on the board I really had no use for the 1060 6GB.
So I put it on Ebay.
Then wegg put KOTOR on sale for effectively free, and someone mentioned how they would love to play it for the first time again. I remember all the hype, but I never played the game, so I sprung for the $2.99.
Then Battlefront 2 was also $2.99 and now the Intel UHD is a problem.
@frank stirrup so my case was a waste of money cause half of it works?
I wonder if I could sell my dream motherboard and get something else
🙃
Okay so it looks like the B550 Tomahawk has what I need
It’s an upgrade from my new B450 Tomahawk Max
dont mentionj it
I'll stop mentioning it.
But I am incredibly grateful.
@frank stirrup what’s a hub
It's for fan headers and/or argb/rgb
Yeah basically
Depends on the one you get
My motherboard still isn’t compatible. I need to plug that directly into the board
Oooh wait it has an adapter
this?
It only has the adapter for compatible motherboards tho
My B450 isn’t compatible tho
Idk maybe I’m stupid lol
Wait it says the mobo doesn’t have to be compatible
Hehe my inside of my case is so cool! I can feel the air moving lol
Having issues with the other discord servers, so we'll try here: So I got the set of Crucial RAM I wanted for my build, but they don't have heat spreaders on them. Any suggestions on kits for that, perhaps ones with RGB that works with aura sync?
idk how to help. i did see your question the other night though
Lian Li SL120 or AL120 work well too because you only need 1 fan header per "side" of your case (and the fan controller it has can support up to 4 chains of 4 fans (aka 16 fans)
If it didn't come with heatspreaders it doesn't need them btw
i heard the Lian Li may work too, i just wanna stick with Phanteks unless thay dont have what i need
Aware, was looking for something more for style.
such a beautiful thing, i can feel the air go out the back of my case and my exaust fan isnt even working lol
Fair enough but 2 fan cords per 4 fans makes cable management easy (they click together to share the cords) helped my SFF build at least
i wonder if i should order splitters on tuesday too along with the rbg controller, if i wanted to add top fans later
my plan was to have the 3 front fans on a splitter, and the rear exaust fan is not getting changed, that way im only using 2 sys fan slots
You should be able to find some on Amazon if you just search ram heat spreaders
Found plenty, just looking for recommendations on quality.
They're not really a thing people review because they're not needed, just choose one you like the look of
EZFAB keeps coming up, so that's probably the choice.
https://pcpartpicker.com/list/rYyNLP
Can you help me with finding a motherboard?
id like to ensure it supports the case headers. wifi. Bluetooth. preferably 90 degree pin connecrion to fit behind rhe cutback in the 7000d. pref black and no rgb.
yes
https://amazon.com/dp/B0748HV4B4/ @vestal knot
Powered by AMD Ryzen (AM4), the ROG Crosshair VI Extreme strikes the perfect balance for gamers and enthusiasts, combining powerful features with the industry-leading performance of 5-Way Optimization and Auto-Tuning for complete system control. Dynamic AURA Sync RGB lighting with additional head...
Turn off the rgb
Hello everyone. I have a question.
Hypothetical, if a person wants to have 11 fans in one case, how will they go about that with power delivery to the fans?
All the 12 port fan hubs I was looking at have only 5 for fans and 7 for something ARGB.
Ez go lian li SL120 or AL120
The fans I will use are gentle typhoon and t30
Arctic p12 pwm fans have a good rep btw
I would recommend two 6 or 8 fan hubs
Splitting it up helps with managing cables and gives better control of fans
Like 1 controller for intake and 1 for exhaust
You should order cable extensions to fix your cable management @long rock
Oh, check bios fan settings. Perhaps there's something like a pwm setting making the rear fan not spin up at idle.
You're a smart Ice cream chicken.
That's not normal 3pin fan, it's the argb cable or w/e.
420 in top or front?
thanks
If it can do top do top tho
Ye I changed the fan to PWM in the bios and still nothing
That fan is getting replaced anyway
There's a time and place for everything, that is the time, this is not the place 😎
Why so serious? Removed.
There's a time and a place for everything... and it's called college.
Oh I meant in bios try pwm/voltage control disabled for that 1 fan. If it's dead, then it's dead though
Man if I was paying $150+, I'd probably jump up to a full tower 
the human heart is like a psu
the brain is like a cpu
okey i wonder if a DRBG adapter is all i need for my fans to work
Bro my under load temps have dropped by 20 celcius
I went from 82 under load to 60 under load
Just the new case
Dang
what was your old case lmao
That’s way better than I was expecting
saran wrap?
i'm getting 34C load on a 3070 in the best case ever made
the best case is no case
You have been enlightened to the wonders of decent case airflow. Long live the king, & mesh is the king.
What case?
The p500A nvm
Yee
P500A
Its so excited
I need it to be Tuesday so I can order that RGB controller and 3 way splitter and some cable extensions
Banks are closed, it’s a long story
update us when you get it
excited to see the final pic
For sureeeee
I’m excited too
I originally thought I needed a new motherboard because I don’t have a 5 volt pin but the new controller apparently comes with an adapter I can plug into for my fan lights
Bruh
Well I'm glad your fans arrived.
lmao
that is good
so on that controller with the DRGB adapter, that will give me something to plug my DRGB thingy into so my fans light up, because i dont have a 3 pin 5 volt on the motherboard?
i hope?
https://www.amazon.com/EZDIY-FAB-Converter-Transfer-Splitter-Motherboard/dp/B082KJH2T3 i wonder if this would work too?
im trying to find videos on the Phanteks controller but i cant find any
god i hate thid
this
https://www.amazon.com/Addressable-Lighting-Splitter-Motherboard-Interface/dp/B08GCD71CG/ref=pd_lpo_1?pd_rd_i=B08GCD71CG&psc=1 this maybe? it looks like it plugs into my B450?
This is a PWM ARGB 2-in-1 6 channel hub with SATA 15Pin power supply that can supply power to the fan and ARGB at the same time. 6-channel 12V 4Pin PWM interface and 6-channel 5V 3Pin ARGB interface start at the same time, centralized control and speed regulation. Extend the motherboard interface...
https://linustechtips.com/topic/1301268-5v-to-12v-converter/ i found this thread. i think if i plug the hub into the motherboard, and then just plug ,y DRGB in, my fans should light up, because in theory its still connected to the board right?
I have the B450 Tomahawk Max, which has no 3-pin 5v headers for RGB. I want to get the Phanteks Eclipse P360A which comes with 2 ARGB fans and I want to buy another of the same fan (Phanteks PH-F120SK) for exhaust. So in total, 3 ARGB fans. I found this adapter which apparently can convert 3 pin ...
perhaps. mobo connection is mostly to read/adjust fan speeds in some way instead of just simply getting power.
I've had heat issues with the 5800x granted im using a 5600x stock cooler but I came across this video that completely shocked me. I was getting 90-91 degrees playing rainbow six seige on max settings and it was bad. After doing this I'm at a stable 55 degrees. You maybe wondering if this lessens fps but it actully increases your fps by letting the gpu do a little more work. I just wanted to share this before you upgrade to a new cooler this saved me money. https://youtu.be/I3Nujm8D8ys
This video is for people who faces stuttering/Lag in games due to High CPU usage. Normally some games uses more CPU than what is actuality needed and make no use of the Graphics card (GPU). This fix help to solve the issue and let you play games stutter-free.
Still having issues? ... Please leave a comment with your PC configuration-
My P...
it's
only a workaround tbh
but works to keep cpu from throttling if thermals are so bad
but you won't get optimal perf at all
saving money is good but it's not good when you do cheap out lel
^
https://pcpartpicker.com/list/YzGT4d hi this is my first build and I was wondering if this is a good one. I already have the case and cpu cooler (Ik it comes with one but I’d like to change it) and I chose that power supply because I’d like to upgrade the cpu and gpu in the future without having to replace it but I’m not too sure. my budget is 1000-1200 smuckaroos
Thanks in advance
The games I’m trying to play are mostly modern games (apex,gta v,etc) But dayz being the main one doe 🙂
Would swap to a different cooler
And well, 12100 is another option
GPU pricing there is pretty bad
I forgot to say that the gpu Is just a place holder I’m still looking for one I’m just not too sure
An i3?
11400 12400 12100 all other options, 12100 most comparable in price for 12th gen
Okee dokee : )
12400f + b660 are similarly priced, and please don't pay that much for a 1650
Definitely won’t thanks for the look out 👍🏽
12400F is $180ish, 12100 is $125ish for those who don't need the 6core & also have to save that extra $45-50
i thought 12100 was 97? is it hard to find at msrp?
retail msrp price was 129.99 although most retailers sell it for 109.99 and some like amazon for even less
oh
guys any 4k monitor that has inbuilt hub as well
I have a feeling any gpu is capable of 4k?
does this PD2700U has a inbuilt hub?
Huh?
Just have a look at the pics and see if it has any usb ports
ok
Hi, m looking to buy an online ups for my gaming pc. Slight over clocks on CPU and GPU. Got a 3900x and 2070 super. Would like the UPS to run at least 10 mins bcz I have frequent power cuts
Any recommendations? Currently I'm looking into this one.
Microtek- Online UPS E2-1KVA 24V Pure Sinewave with in-Built Batteries (12V 9AHx2)
What???
How's that even related to what the guy was asking lol
Can someone please help me with my pc build
I got a new motherboard and cpu and it’s not turning on
It will turn on for like one second then turn off
yeah im hoping the phantekc controller has a 3 pin i can plug into lol, ive showed it on here before, its for the DRBG port
It should work if it's for drbg or w/e you have
1st thing is double check all power. Eps 8 pin in top left, 24pin mobo, gpu power, and reseat ram if you have to (reseat means reinstall)
hey anyone free to voice call ? i really need help with my pc
What do you need
im having really bad fps issues
what hardware, what game
modernwarfare 3070ti
what's the rest of the system
ibuypower?
Do you have cpuz?
is that it
31.8 usable ram
what frequency though
how do i find that
Device name DonniesPC
Processor 12th Gen Intel(R) Core(TM) i7-12700KF 3.61 GHz
Installed RAM 32.0 GB (31.8 GB usable)
Device ID B08C29C4-4BDA-4DFD-9380-75924A7AA6D9
Product ID 00326-10000-00000-AA282
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
cpuz would've been nice, but without cpuz, just open task manager for now
and do what
Performance tab, click on memory
then
What does it say on the lower right side
Welp, task manager not always trustworthy, but assuming xmp is on for now
can someone please help me ...
What might you need help with?
!ask
mr1111 fix it thanks guys
okay
what are some good laptops for gaming like cod and val, budget is around $1000
Hi,
I'm looking to put a new PC together but have been out the game for awhile - does anyone know if this will work or have any other suggestions?
ASRock B550 STEEL LEGEND AM4 AMD B550 SATA 6Gb/s ATX AMD Motherboard
ASRock Radeon RX 6800 XT Phantom Gaming D Gaming Graphics Card with 16GB GDDR6, AMD RDNA 2 (RX6800XT PGD 16GO)
CORSAIR RM Series RM850 CP-9020196-NA 850 W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS GOLD Certified Full Modular Power Supply
AMD Ryzen 9 5900X - Ryzen 9 5000 Series Vermeer (Zen 3) 12-Core 3.7 GHz Socket AM4 105W Desktop Processor - 100-100000061WOF
G.SKILL Trident Z Neo Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 4000 (PC4 32000) Intel XMP 2.0 Desktop Memory Model F4-4000C18D-32GTZN
Corsair H100 RGB Cpu Cooling 240 Radiator RGB 120mm 2 Fans RGB CPU Liquid Cooler BLACK
Montech Air X ARGB - Black ATX Mid-Tower Gaming Case/ Super High Airflow/ Pull Out Tempered Glass/ Metallic Diamond Mesh Front Panel/ 2 x 200mm ARGB Fans & 1 x 120mm ARGB Fan & Fan Controller
Sabrent Rocket Q 2TB NVMe PCIe M.2 2280 Internal SSD High Performance Solid State Drive R/W 3200/2900 MB/s (SB-RKTQ-2TB)
Thanks,
That's really hard to see. Would you be able to put that into PcpartPicker ?
8gb ram? would it effect when i play games
ik jts 16 gb recommended
Oops sorry.
Wrong link lol
Yes 16 go is basically a need in today's gaming.
Valorant does not need 16 but COD is better with 16.
Okay so it could do some improvement but do you mind putting it into a https://pcpartpicker.com/list and sending back the link i the yellow box, and let us know your budget and what you wanna use the pc for
16gb is just recommend for pc's nowadays
👍
Go with that one ^
If you click customize it shows 3070.
ohh nvm im blind i was looking for in different section
confusing layout
It is yea.
Working on it now..
Mainly for SIM racing and some FPS
cool, and whats your budget? and are you in the us?
Yes, in the US and Trying to stay under 3 if possible
https://pcpartpicker.com/user/Cilo456/saved/#view=dTxrMp
Okay 1 sec imma make some changes
Do you want rgb?
If it has it but not my primary
task manager not always trustworthy but never seen it wrong on that one
inb4 3200c22
Task manager was reporting my dads 1800mhz ram as 900mhz earlier on ;-;
lol interesting
It's like it was reading the true mhz value and not mt/s or something lol
okey ive been looking at these drgb cables more
This needs to go into a thingy that is connected to something by motherboard, because I don’t have pins directly on the motherboard
And these need to go into one of the top thingys also coming from somthing else, idk
i cant put them together otherwise my side lighting and the little light on top of the case dont work
so idk
i cant explain this
basically what do i need to make my front fans light up, i know it has to do with these
i dont have a drgb pin on my motherboard, so, i was hoping an adapter that i can plug into my board will work, idk what to do with the bottom one
that's the male cable
you don't need that
plug this into rgb header
on ur mobo
i cant
it doesnt have an argb header
its a special 3 pin thing
thats why im looking for an adapter
im not buying a new board unless i can get like 190 for my B450 Tomahawk Max that will allow me to not take a loss on a B550 Tomahawk
im tired of losing money on this thing
ive got like 1300 dollars into what should be like a 800 dollar ordeal
just wait till b660
whens that coming?
pretty soon i think
good mobo too if you don't care about ocing your cpu
i have the b560
see i wanted to keep this board for as long as i could but with my current setup i think i messed up
again ffs
b660 boards are cheap
why would you spend that much on a b450
because im tired of wasting money, a B550 Tomahawk is 170 ish
60 series is good!!!
buying that motherboard period is a waste :P
because of 11th gen?
because its overpriced
and 11th gen... lol
ive tried selling my old parts but nobody has shown intrest and its pissing me off because they are sitting here collecting dust and i want them gone
i may just EBay the stuff but idk how payment and stuff worksd
Set up an auction or sell at a set price, get money through paypal, Ebay takes 12%, gives you a shipping label and send
Interesting
Okay I am on Facebook so I think imma list it there
I try to sell on Facebook first
so, my question would be, should i just build my old setup back into my old case or sell all the stuff seperately?
anyone got good suggestions for monitors for a dual monitor setup? tryna get the monitors to have one vertical and one horizontal but cant find any that look good, work well and can be placed like that
Just depends really
nobody wants ddr3 crap tho and thats what worries me
I’d list it all together and gauge interest. People will ask for certain parts if they want them
Budget gamers would probably be interested if it is a decent build for what you are asking
Or you just part it out on the build offer
I bought my b460 for 100$ that is too much for b series board
god
i figured
i got my Tomahawk Max for like 120 i think
idk why the newer board is so much more expensive
@bleak hound i know you wouldnt buy it, but do you at least wanna see what i have and what i should be asking?
Show me hard to justify that much for b series board that is z series territory
z or b doesnt classify how good a board is
especially for amd
that being said, i wouldnt pay that much for a b450, especially with a decent b550 board being under 150$
I paid 100$ for my b460 ,put a 10400f,16gb and a 3060ti and called it a day i don't think mobo natters that much for performance
disagreed
motherboards VRMS can weigh in heavily on performance
a cheap motherboard can fail easily
Depends on the cpu
such as most biostar motherboard
for a 10400f, motherboard doesnt matter terribly
b560 is better because then it can run XMP
but exact model wont matter much, since its not like 10400f gets hot or uses a lot of power
as for most b450s (keyword being most) i wouldnt put over a 5600x in one
But what CPU he planning on getting he did not tell ys
yeah i have a 5600X in my B450 Tomahawk max
oh yeah, i was gonna run a splitter on my front 3 fans
i just still dont know if i need a new board or not for my front fans to light up
ugh i need a controller, nvm
you can run xmp on b460
just that whatever xmp profile you run will be limited to 2666 frequency
if you apply a 3200 16-18-18-38 profile you will get 2666 16-18-18-38
still better than 2666c19 jedec
Anyone know of a good laptop 700$ or under, just needs to be able to run programs like blender or unity, and have a decent vram to run some games. I am bad at finding computers
thats not gonna happen unless you get something second hand tbh
Oof
Ok
It doesn't have to be like godly at running anything, just enough. I don't know anything though. I really have no idea what I'm doing
Ooh
Dam links don t work
I saw it though
For a second
send it without the https:// part or dm me it
there's a nice deal for a 1000$ laptop but don't think anything good below that rn
They're probably right cuz I was looking for something the same price that cud run 1080p solid 60 fps and cudnt really find anything
Like a solid 1080p machine for normal games not just esports
eSports type games
The nice 1000$ 3070 laptop deal went out of stock
that laptop had sales as low as 700 bucks
Are prebuilt computers assembled by hand or by robots and such?
Thanks
yeah gotta be by hand
Reason: Bad word usage
no way a robot would be able to assemble a pc and cable it and stuff
Bad hands unlike origin pc
The technology today is amazing I won't be surprised if they can
yeah cables is what makes it seem just
not that possible
you'd have to be so precise
mostly those tiny little power button ones and stuff
and so delicate
yeah
props to those mfs that build pcs for us
frfr
lookin at you asus
with your strix prebuilt
looking at almost all prebuilt brands
nzxt is
ehhh
Companies that manufacture large amouts of prebuilt PCs usually use the same case for a large portion of their products so if a machine assembles the computers it's doing the exact same movements to assemble certain models so they only need to move in one specific way in order to assemble the computers
Or maybe the cases are designed in a way that makes it easier for machines to organize the cables
As far as I know they just throw all the parts to a truck and it magically assembles when they arrive to your home or store
thats where a robot would excel actually
cable management however
doubt
youd have to have it so insanely precise
and finding a way to reliably grip the connector would be difficult
that is why robots are used on most assembly lines
they use them on tiny little 2 pin case connectors?
im saying making a robot reliably grip that connector in the same spot everytime and still have clearance to actually get it into the case, would be very very difficult
its actually the 1 thing a root would do very well
hey there, out of this
S2721QS PD2700U P2721Q which is better?
monitors
I purchased ram with to high mhz could this be why I can't change xmp ? Newb here
What cpu, what motherboard and what ram?
It's a pre-built. A320mh ram is 2x16 3600mhz. Went into bios Googled the mother board . It says it supports 2x16 but it says it only accepts up to 2933
What cpu as well?
Ryzen 5 2600
It's your cpu, you'll have to return it or manually downclock it to 3200mhz or 3000mhz if 3200 is unstable
I'd just return the ram and get a cheaper kit tho
So it's actually running good compared to the 1x8 it had but I know they say when you get a new ram you should update xmp . Which honestly I have no idea what that means
Not update xmp but just turn it on but in this case the easiest thing for you to do is to return the kit you bought and buy a 3200mhz cl16 kit instead
Is it true that amd words it differently could it just be that I do not know what I am looking for ?
Also how did you come up with the 3200 number ?
No, only on asus amd boards asus calls it docp instead of xmp because they don't want to pay intel the 50c fee for it lol
Ahh lol kk
it's just the next step down from 3600mhz in terms of xmp
2933 iirc is just default mobo settings
Oh ok
His 1x8 was 3000mhz
Can I upload a pic ?
When I go onto bios it shows 2 rams but only at 2400.
Thoughts on the Nzxt n7 b550
Fine obvs overpriced
Assuming you already have an amd cpu? Because intel 12th gen is best bet atm
I do
Just accidentally broke a pin for the power switch on my old motherboard
7 3700x
I figured it out boys . It's now zhoaing 3200. Let's see how it runs. Sorry for being a newb brat just trying to learn this pc world for my kid
No worries
We all start somewhere
I've had more than my fair share of moments in this server
I’m nearly done collecting parts for a new Core i9 12th gen build, but wondering if anyone has experience with the Lian Li O-11 Dynamic? Thinking about AIO mounting spot in particular…
Not directly but what's your question
Just - front or top mount
I’ll have fans enough to cover the rest of the intake & outflow
Top if possible for the rad size
any major flaws with this mobo or is it a good deal? its compatible with my parts as far as I know
https://www.newegg.com/p/N82E16813162055?Item=N82E16813162055&nm_mc=AFC-RAN-COM&cm_mmc=AFC-RAN-COM&utm_medium=affiliates&utm_source=afc-PCPartPicker&AFFID=2558510&AFFNAME=PCPartPicker&ACRID=1&ASID=https%3A%2F%2Fpcpartpicker.com%2F&ranMID=44583&ranEAID=2558510&ranSiteID=8BacdVP0GFs-fckrkHpdiiTwJlH5Gr2rdw
@fossil cedar
Yeah the power delivery is and heatsinks are non existent 5 usb a ports and 1 type c meh, only 2 ram slots basically only useful for an i3 12100 office pc or something, if you're doing more than that get the b660 prime on Amazon for 140$ instead
yeah, that was my thoughts on it. Thanks for the confirmation!
np
hey peeps, haven't built a system in over 25 years, tech has changed alot since then. I just want to build a system that will give me a faithful 60fps, and be relevant for a few years. what should i go with? I dont play many video intensive games. looking to stay at or under 1k
Hi, does anyone know any good gaming laptops or pc's that have core-i7 and 16gb ramm 3200.
Honestly at the moment you're better off getting a prebuilt than building it yourself, I'll find you something now
What budget and use case?
1000.00 or under and I dont really care about what the case looks like.
I'm pratical lol
for use just work and light gaming. For budget less than 700
700usd?
Do you mind open box?
Are you looking for any specific features?
IDC
https://www.newegg.com/abs-ali587-master/p/N82E16883360222R I'd go with this
no not rlly. ik 700 usd is less so i dont care too much ab features
thank you
no prob
Either would be fine
well do you need to move it around alot?
I just have a low budget
lemme find a pc for that price
Yes
then laptop is probs best
I planning on getting one in a couple of years for college
Ok
np
#build-pics make me cry bc i have ugly setup 
maybe i should invest in wireless RGB keyboard
So....I got the new motherboard and won't turn on
I tried 2 different power supplys and outlets
I'm just gonna take it to the shop
@analog pulsar your not the only one 😂
can someone suggest me some ram that is 16gb 8x2 and 3200mhz for $100 or less
Finally ordered all the parts for my wife's build.
Nzxt h210, asus b550i, 550w gold full modular, team group 1tb nvme pcie ssd, ryzen 5600g, 16gb 3200 corsair rgb
Can't say I approve the case choice but it should be interesting
Why is that
It's an Nzxt case (bad airflow).
Bad airflow
🔥
True, yet I'm not using a gpu so it should be pretty solid tempwise, and she doesn't game. Its a work from home pc
Should be fine, but honestly you can get other cases in the same price range that are better.
Heck even a corsair 220T airflow is pretty good.
Waste paying for 5600g and expensive b550 then :p should have went intel for cheaper tbh
220t is fine
220t airflow is on the bad side for airflow cases but fine in general
Yeap.
But it's definitely one of the cheaper options.
True true.
220t airflow at least for the US isn't priced too well
Here in Canada I think last year it was around 100 bucks.
last year td500 mesh was also around 100 cad
which I often picked over 220t airflow
That has more volume correct?
supports 360mm rad top which makes it a much more favorable choice
True.
For 90$ you can get a p360a in canada iirc
Not anymore.
Last time I saw that was like 8 months ago.
They are like $20 more expensive now.
$110 iirc.
Jeez prices are wack atm for p360a and 220t airflow 
In Canada
@stoic island do you know the difference between the cougar mx331 and 330 btw?
Fr lol.
Anyway mx330 for 63$ and add a p12 for like 12$
don't really know
Would any of y'all buy a 12700K with a h670 motherboard?
Are you that tight for cash? Msi z690-A pro is $220
Wish I could post a pic of my first ever build, but I’m not special enough
Lol nah. Package from Amazon got stolen so now I have a credit for a motherboard and the next time they'll have an MSI delivered is February
Nope, you're paying the k premium for a cpu to let you overclock but you also need to have a z board, if you don't want to overclock, 12700(f) and b660/h670 otherwise z690 + 12700k(f)
Thought the same thing. I'm just being impatient
Not as good but it's in stock on Amazon
Just bought a 12900k and a kraken x63 but when I install the backplate for the cooler and the standoffs to keep the bracket mounted it seems to be loose and not snugly secure, is this normal? The guy at micro center told me that this cooler would be compatible with this cpu is that not the case without a special bracket?
You need a lga 1700 bracket that probably did not come with that AIO
The documentation should tell you what brackets you have 1151/1155/1200 and AM3/AM4 is not compatible
Any recommendations for gpu supports?
You can get the bracket from manufacturer
Amd 😉
im thinking of building a pc but i don't know anything about the parts and if they are good
What do you need?
@topaz kestrel proves this 
use yo gpu box
cpu*
it actually works really well
Something not so trashy?
The lego suggestion was real, they work really well and you can stack however you like
You could make a lego tower in colors that match your theme, or a picture made of lego
Lol it is in my sons room. I could let him go to town.
who is is trashy lmao
I would think using literal trash in a build would fall under the definition of trashy lmao
One person's trash is another's innovation
I don't even call the processor box trash tbh, I keep them
Maybe I’m just an old fart, but I’ve got to much junk in my house already. Anything I can get rid of goes for me lol.
Has anybody airflow tested that setup? 🤔
cpu runs under 60 max all cores
gpu at 63
thats with a £20 cooler
and 2 random fans
👌
I’m curious what mine will be. Have a 3060ti coming that will already be a tight squeeze
This one too if you change the case https://www.newegg.com/abs-ali560-master/p/N82E16883360190R
Thanks, Hellsing is great
hi
can i get help finding cable extensions
i need 3*8 pcie and a 24 pin and i want them to be flat
idk how or what i should be searching for or what are the best brands
Cablemod is good
In the Newegg PC Builder pages, what does ABS only mean, with regards to processors ?
ABS is a brand of pre built pcs
they are some of the only good pre builts that arent overpriced
Okay. So I have heard about ABS Master.
can someone help me with my pc
!ask
Antilock break system 😏
nice sag bracket
What abt it
can someone help me with making my computer boot straight to windows instead of bios please? i’ve been stumped for a few days with this
Well have you installed Windows yet?
yeah
just without the license key though
In bios, make sure your first boot option says something like boot(drive name)
yeah i believe i have it set correctly
i can take a pic in a sec
Yeah dm me a pic
sent
Looks okay..., So when you hit save and exit you enter bios again?
yeah all the time
Hmm
Can you try clear cmos
yeah give me a minute
@fossil cedar if i had just cleared cmos, would it still boot straight to bios or windows
Well it should go into windows if you don't press anything on your keyboard
ok imma try again
yep it still didnt work
That's odd, can you manually launch into windows and just use a keyboard checker website to make sure your delete or f2/f12 keys aren't being detected as pressed because that would launch it into bios
yeah that's not the case
Idk what would cause it then
damn that sucks
thank u for the help though
Np
@little osprey I have an idea
what is it?
I've had a similar issue occur on a system that had an MBR windows install and CSM enabled iirc
check which format your windows install is in
okay ty, i’ll check it out later since its pretty late
what is your mobo?
rog b550 f gaming wifi
ahh
interesting
I had the issues on a z370 extreme4 and nothing newer than that
looks like pato already checked your boot order
yeah the boot order was fine i believe
did we try disabling fast boot in bios?
if that didnt work I would unplug all hard drives and restart the pc with none connected then shut down plug in the hard drive with windows on it and start it up and see if it goes straight to bios if not plug in the remaining hard drives and should be good to go. Motherboards can get stupid if hard drives move around
If nothing else works you could try reinstalling windows
I dont see how that would fix it tho
Could also run a chkdsk and sfc/scannow
I dont know man, its going to bios, thats way before boot sector is read, or am I talking out my rear?
I recommended trying this of it did not work already.
Do you still have the USB drive windows was installed on?
Take out any other drives, except the boot drive.
Delete all drive partitions on the boot drive.
You shouldn't really be going 10th o 11th gen in 2022 so imma so no unless you have a really good deal on a 10850k/10900k lined up or something
Oh why not?
Like 165$
12th gen
Is better?
Is way better
nothing i just thought you looked cute
Budget?
12400 b660 goated
That's a personal question, like what do you have no, ram gpu and cooler wise because you might need to buy new ram and cooler/save up for better gpu and what is your use case?
I have 16gb of ram
Lían li case
Lían li aio
I have a 3070 gpu…
I need a better one?
What speed is the ram?
3200 mhz
@raw crane https://pcpartpicker.com/list/4WvPmk
Ehh it's not worth it
Good aio
Assuming your just gaming
Yeah^
Thank you!! Ordering it rn!!
Lmao all good
@raw crane https://www.amazon.com/Prime-B660-Motherboard-DDR4-2-Type-C/dp/B09NWF1JQC this one actually
The ASUS PRIME B660M-A D4 is expertly engineered to unleash the full potential of 12th Gen Intel Core processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, ASUS PRIME B660M-A D4 provides daily users and DIY PC builders a range of performance t...
Might as well get atx when same price
Okay
Ug linked wrong 1
The ASUS PRIME B660-PLUS D4 is expertly engineered to unleash the full potential of 12th Gen Intel Core processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, ASUS PRIME B660-PLUS D4 provides daily users and DIY PC builders a range of performan...
Here
Np
Does it not have one of those things by the USB ports?
Like the plastic cover or something
Idk what it’s called
Oh sick, just ordered it i APPRECAITE it
Now for the cpu
Wait is it fine if I get the i7 12 series? @fossil cedar
Orrr does it perform basically the same?
I got the i7 😊
Yeah, i would wait til 12700(f) is back in stock tho, going paying the premium for an oc cpu without the mobo to do it not worth
I'd get different mobo then
What mobo then
Okay I returned the mobo gonna get that one then
Yeah I cleared that already
@fossil cedar there are boards with both ddr4 and ddr5
He might be tempted to get ddr5 later on
@fossil cedar what does this review mean about it?
Just needed a driver for Ethernet to work
You don't need that pcie card you can tether Internet from your phone
Okay sick
Thank you
They're just saying they needed to download the wifi driver first probs
From who biostar lmao
Probs gonna suck
Those don’t exist, it’s two completely different dimm slots
Think they meant a combo board, biostar did one or 2 swapping from ddr3 to 4, they sucked tho
Like it has both ddr4 and DDR5 dimm slots on one board?
Yeah i don't know of any tho
Yeah something like that exist during beginning of all ddr generation
Hey guys do you know if a Ryzen 7 5800x can work with a ASRock b550 steel legend?
It should, only problem with that board is no bios flashback, apart from that great board
Wdym by bios flashback?
It's a way of updating bios without needing a supported cpu
I'm looking to take some old PC parts and use them for a project. Only thing I'm missing is a power supply (and a gpu, but for what I'm using a bare minimum gt710 is all I need). What should I be looking for in a power supply, and do you have any recommendations?
What's in the system? Guessing theres no igpu too
No igpu. It's an old athlon 860k
Ahh
Personally I'd look for a cheap power supply on r/hardwareswap
gigabyte psus
a lot of thermaltake psus
any random non branded psus, i wouldnt trust smthn without a name
Ah there we go. Thanks for that.
any budget for the psu?
The reason i was asking for pointers was because my dad searched "power supply" on Amazon and was like "oh look at this"
It was from a brand I had never heard of
if you cant find something cheaper thats decent quality https://www.amazon.com/BitFenix-Formula-Standard-BF-650G-BP-FM650ULAG-7R/dp/B0776XSRJJ/ref=sr_1_3?crid=3I0YIEBNFLXXT&keywords=bitfenix+formula+gold&qid=1642445350&sprefix=bitfenix+formula+gold%2Caps%2C72&sr=8-3
Introducing you the newest line up of BitFenix power supplies that boasts of extreme quality and world's best performance with 80+ Gold efficiency and up to 92% efficiency at typical loading. The new BitFenix Formula Gold power supply line up comes with a wide range of power options starting with...
i think thats the one pato reccommends
Anything D tier preferably but really E tier in the list in the pins
Yeah but that's overkill for 1st Feb cpu
Ok thanks for reminding me of the tier list
and if i dont have any hard drives? would this apply to the ssd i have installed
@little osprey yeah I would still try it
yes any storage drive including nvme,sata,pcie,ssd,hdd,ied all of them
take them all out and start the pc with no drives
Sata ssds
then put the one with windows on it back in and see what happens might have to do one restart after this
Can anyone tell me what this little die is on my laptop? It’s not cooled by anything, it’s just there
Looks like a CPU tbh
does your laptop have a dgpu?
it looks like a laptop gpu
Think they wouldn't put heatisnk on gpu?
Looks like thermal pad on there so I assume it might be cooled with like the bottom chassis
Oh you're right i thought it was colour of die for a sec
But it could still be smth like chipset, although never really seen a chipset chip on a laptop
its either the cpu or the gpu its too big to be the chipset tbh
Well i didn't know how old the laptop is 
Just realized ddr4 ram tho
my money is on cpu
My bet is CPU is under here
yeah took me a min for that lol
my best guess was the chipset but i feel like it would get really hot without any cooling
Could you take the thermal pad off and see what's written on the chip
this even got the cpu alignment trianles tho
its not a thermal pad. its reflective
What
chipset then?
That's weird
my money is still on cpu
Why is it like that
the CPU is under the heatpipe with the GPU
Coloring still looks like thermal pad to me but what
Id cpu and gpu under heat pipe it gotta be chipset
If it's CPU or GPU die there would be something that would be inscribed onto the die
not cpu die right
give me a sec to take the back plate off my laptop again
what gpu is in the laptop?