#building-and-recc-chat
1 messages Β· Page 1094 of 1
i need them to play minecraft
you need those shaders
I can send you a video tutorial
i can try it but i have been trying, i mean the problem im having is basically all my cables are 12-4 pin and all my motherboard places are 1234. i have no where to plug them in
when i go on youtube to search for a guide for aio installation
and in recommended videos there's really tasty looking food

now i want food
Pics
if we can figure this out i will actually buy you dinner lmao
bet
Dm me the pics ill send em here for ya
bet
for legal reasons, that's a joke
it is sad I live almost 2 hours away from my closest microcenter and cant drive
but yeah if you're talking about rgb it may be different rgb standards (such as 4-pin rgb vs. 3-pin addressable) in which case you'd need an rgb hub/controller to get it done
Rule 9 π
im on dm with isp
if you can help me live that would be ideal, i thing they went offline lmao
i asked what mobo and what aio you bought
i just wanna get this darn part over with lol
i wanna see if they have compatible rgb standards
oh sorry, mobo is rog strix b550 a gaming
aio is (dont laugh) (ok you can laugh) the ID pinkflow
and the fans im trying to also connect are the lancool mesh 2
why would i laugh pink builds are lit
oh dam people on the other discords im on absolutely hate on me for getting that aio
why?
im like sorry buds thats what im getting
they say its super bad
but im not trying to get optimal im trying to be aesthetic
aios have very little variation in performance
so your motherboard has one ARGB header
and ARGB is the type you need
luckily for you ID-COOLING bundles a splitter that allows you to connect multiple fans to one header
You like what you like. I wouldn't even give someone crap over painting their build neon green. It's not my PC.
https://youtu.be/xfMviVotmAE?t=77 watch this video starting from 1:17 where they demonstrate how to do so
This video tells you how to connect 5V 3pin ARGB water coolers from ID-COOLING. This video can apply to below models: ZOOMFLOW X Series. If you have any questions, please feel free to leave your comments.
but the argb is what i used for the case's cable, it needed to be plugged into an argb too
ah
so your problem is that you don't have enough argb headers
well
there are a few possible solutions
solution 1 is to use another splitter (you will have to buy for a couple bucks) to hook up the case fans and the aio to
and then plug in the splitter into the mobo header
gives you software control on all fans simultaneously and 5 fans are safe on one header
solution 2 you can avoid buying anything by using the included argb controllers
your case has a built in argb controller that can be controlled via buttons on the top
oh so that is what is connected rn to the argb?
if you plug in the fans from the AIO into the mobo, then you connect the case fans to the case's built in controller, then it'll work without buying anything extra
however you'll have to control the case fans with the buttons and the AIO fans through software
which is not an issue if you are going for a static color (like static pink or white)
if you are going for synced rainbow/complex effects then you will have to just get another splitter
how hard is it to change that later if i wanna get it connected now and then switch to the other way later?
Not very
all you'd have to do is disconnect the case fans from the built in controller and reconnect them to a splitter
a matter of seconds
ok awesome so rn ill try and connect it to have one solid color that is okay.
but i have to physically control the fans?
look at the picture i posted
you have to use those buttons to control the case fans
AIO fans will be controlled via software
ok, instead of the color lol
sorry this is a lot to try and follow lol
so rn ill do the way i can do rn with the parts i have, and i will get splitters next tim i can get to a micro
there are plenty on amazon dirt cheap with prime shipping
so each of my fans have 2 cables, one is a 12-3 female, and the other is a 123 female. which is what
so by 12-3 you mean there is a gap?
that is right
the one with a gap is for ARGB
the one that's just 3 pins with no gap is fan power
that would go into a fan header on the motherboard
ok but i have no splitter for those 3 pin only ones?
your motherboard has 5 fan headers
ok, i have 6 fans so i can only get 5 working rn
it would be very surprising if there are no splitters included with either the case or the cooler
are you sure?
lemme check
can they be daisy chained?
some fans have an additional 3-pin male header that can be used to give power to another fan
typically cases or coolers with multiple fans will have some way to merge the cable requirements of the fans into one header
whether it's daisy chaining or included splitter cables
ok so the cables i have at my disposal are a 4 male 12-4 pin that goes to a 12-4 female
i have a 3 male 12-4 that goes into a female
and the case includes a daisy 3 12-4 cable
and i also have a 123 pin cable that goes to a 12-4 cable
picture would be more helpful at this point lol
according to amazon q&a the pinkflow does include fan splitter cable
ik that is why i am trying to video with people cause pictures are time consuming lol
one sec
second picture is the fan splitter
Those are the 3 splitters I have
That one is for the pinkflow fans right?
presumably, since pinkflow has 2 fans and case has 3
I have the pinkflow 360, 3 fans
plug the male connectors from the fans into red
plug black onto motherboard fan header
oh, weird
they gave you a 2 way fan splitter for 3 fans?
No the 3rd splitter is just not pictured
Sorry π
Thats right
just plug one of each male connector from the fans into one of those
then plug the smaller female connector onto motherboard fan header
Ok and for ref, I have the pinkflow fans loose, the lancool fans are being used on the aio
If that changes things
you should not do that
fans that are bundled with aios tend to be different from regular case fans
Omg π
fans intended to be installed on radiators are more optimized for pressure because they need to push or pull air through the fins
fans intended to be used as case fans typically are more optimized for airflow
Took me so long to change them out π
Okay brb as I swap them out
Which means eventually I'll have to switch the lancool fans out for other pink ones for aesthetic reasons
Is that gonna be a problem cause the 3rd picture only takes these lancool fans, it won't plug other ones
the included case fans use standardized connectors, so no
These cables won't connect to the pinkflow fans
Oh wait... the lancool fans won't plug into the others either
one is using 3 pin DC fan power
one is using 4 pin PWM fan power
both are widespread standards, just different standards
Ok so it won't be a problem perfect
Ugh why is this so overwhelming
it would be a problem if they weren't considering all headers are PWM
you can just plug a 3-pin DC fan power into the header it won't be a problem
It's the RGB adding 6-7 cables that you now have to figure out where they go and manage them. It wasn't this bad before.
but muh pretty lights
I'm trying to decide if I should get sleep or do this stuff now cause damn I'm gonna be tired at work tomorrow π
Just sleep now, it's best to work on these things with a clear head anyway.
That is fair. Thank you both and ISP for your help. I think sadly the next time I'll be able to work on this is Monday π π
I didn't really do much but glance at the convo once in a while but you're welcome π
i mean still what you added was helpful!
Sips deserves most of the credit here still
don't worry about that lol it was a joke
About to plug in my my psu and turn on my pc for the first time. Anyone suggest I double check any specific things first?
just turn it on
no point troubleshooting before you even try turning it on
fix problems if they exist
Alright
anyone still up??
Is it ok to leave my monitors or idle or sleep while my pc is off
Cause I've seen peoples monitors get like burn in
I dont have π
A TV even
What
it works in hdmi?
try it
Put display port out?
yeah
Nice
Its a pre built tho
Oh
Only h
Yeah
I think coz it doesnt have windows
You might want to tomie to help
I'm not the brightest fella
But you do need like a laptop or something too download it from
Ur drive?
Nah its not the driver
Its a bad card
My neighbors house burnt down this morning lol

Its not bad at all
Like broken
Its the driver
Ok
I can brake it. 
Sounds like it broken already
With hdmi it booted up
I think the problem is display cable.
Thats broken i think
The pins
Or the monitor
dp is sensetive than hdmi
cheap cable often break
find a vesa certified dp cable @silent venture
Can you send me some?
The pre built company said it doesnt have a windows
nope
.
No drivers are loaded if windows isnt installed
Yeah
either cable or gpu ports
Only hdmi works
hence either gpu or dead ports
Try a different dp cable
I have to install the drivers
AFTER installing windows
Yeah do that
Need a bootable usb drive but i dont have any other pc or laptop
Get a friend
How would he have drivers and no windows
Yeah i have tooo
Get a bootable drive with windows installer from them
I have to install them too
Them?
You install windows and the drivers
Friends
Ok so Arash answer this OK.
You have no drivers right?
like absolutely no drivers
correct?
I have a usb driver but dont have another pc or laptop
So you don't have windows on your pc?
Ok I give up
Yes

I would return the card
its obviously damaged if hdmi works but DP doesnt
If it wouldnt work i will
Then rma the gpu if other dp cable doesn't work either
Good point
Cause by then it's likely the port is broke
Thats what ive been saying from the start smh
Hi will the GIGABYTE B550 AORUS Elite Motherboard support Nzxt X73 cooler ? i have an AMD 9 3900x
It will but thats a bad cooler.
that one is WAY better
I am doing a workstation build. Do I need a workstation card for it, or can I get by with my 5700 XT?
Depends if you do gpu intensive workloads but it's a pretty decent gpu so I'd say yeah
Amd doesn't lock down their cards for workstation tasks like Nvidia does
Your 5700xt will be fine
ok thanks
I mean, 3000 series def isn't locked down. SPanking AMD left and right in workstation tasks
Nvidia doesn't lock their cards for workstation stuff either just quadros are workstation optimised instead of gaming
It isn't a lot of things but there are things that Nvidia does to lock down their gaming cards to try to make you buy a quadro
Its mostly benign stuff for most people to be sure, so it isn't really a big deal to most people. But like, for instance, if you run a VM on an Nvidia gaming card you can't give the virtual system direct hardware access, which introduces latency and effects system stability
For 99 percent of people it doesn't matter in the slightest. But for that 1% and for businesses it can be the difference between a system working or not
nVidia did recently enable GPU Passthrough from Linux to a Windows VM. But yeah, SR-IOV still isn't supported on the mainstream cards.
@muted patio I'm glad you came and confirmed. After I typed it out I started doubting my recollection and thinking "wait, was that intel xeon?"
I didn't know they locked it down like that
That's kinda poopy :/
Although
AMD does the same thing
SR-IOV isn't enabled on the consumer cards like 5700XT
You good? Fever gone?
Excellent. Now find me a 3060 ti at MSRP price that delivers to Romania. You have no more excuses.
Auch, so you had like an allergic reaction
hello
My grandma is 95, had zero reactions after both shots. I am 40 and after the first, my hand hurt, after the second, I had fever for a day :))
DOn't worry, it's just ironic π I was supposed to be the healthy one π
i had loads of headaches
I'm also confirming that AMD doesn't support SR-IOV on their consumer grade cards either. Looks like FirePro, etc for them only as well.
And I suppose you aren't 95 either π
Everyone is different
nope LOLOL
My wife just had a headache after hers
im 13 LOL
and only had loads of sensitive headaches
Im not supposed to get the vaccine for a few more months
Here everybody can get it. Even the kids from next 2 weeks. You don't even need an appointment anymore.
And you can see that in figures.
Radical change, no more masks in public.
Nah I had the covid a few weeks back so apparently i still have antibodies and hence no vaccine for me
So like im not allowed to take it
That's another thing then π
Guys im intalling windows. Is it good to install it on hard drive or ssd? coz my ssd is 256.
You sure?
Running windows on HDDs is nightmare
Ok
Yes, I even daily with win 10 on 120 gigs ssd
Thx
A thing that I didn't know is that SSDs are unlike classic drives, so the bigger the SSD, the faster usually, I mean the same models. Like the 256 Samsung 980 pro is slower than the 1tb 2b versions, etc.
And for the OS speed is great.
And if you auto save every x minutes for games like Skyrim, if you access the drive continuously, etc.
Doesnβt matter which side I use for the motherboard and hdd right?
nope
So my hdd looks like this now do I need something for the 4 pin?
Check this out on @Newegg: Super Flower Leadex III 750W 80+ Gold, Three-Way ECO Mode Fanless, Silent & Cooling Mode, FDB Fan, Full Modular Power Supply, Dual Over Power Protection, SF-750F14HG https://www.newegg.com/super-flower-leadex-iii-sf-750f14hg-750w/p/1HU-024C-00006?Item=9SIAMNPAY44279&Source=socialshare&cm_mmc=snc-social-_-sr-_-9SIAMNPAY44279-_-05292021 95$ 750w leadex IiI gold
The 4 pins there are just jumpers, only used in extremely rare cases
https://pcpartpicker.com/list/2NVGTJ how can I improve this list
3070 only needs 650W at most, swap out the Enermax for a Phanteks AMP 650 on sale for $85. Spend another $5 on the NVME and snag a Mushkin Pilot E 1 TB, then send it.
would it work if I tried to get a 3070 ti on release date?
Don't see why not. 3070 is only a ~220W card
So even if the 3070TI were 300W you'd still be just fine
cool thanks
YW
You even have a GPU πΏ
no it is just on my list
https://pcpartpicker.com/list/cwM4fP how does this look? (Case will be run no front panel)
Everything is already purchased lol
PPP needs to add an option for GPUs "Praying".
Does this look normal I feel like I have a lot less cables than other people
Seems OK as long as everything plugs in
I don't see any RGB so that reduces the number of cables quite a bit XD
is this zen ryzen a better option then intell?
Everyone's builds are beautiful π₯Ί
Now let your ocd run wild LOL!!
The crucial ssd + red cableπ
Shhhhh
It's gone now TBH
I put the Crucial in a laptop I have
Just haven't taken a new pic
I honestly donβt care that much about the crucial ssd, but the red cable is a more preventable thing
I literally just sharpie my red sata cables black Bc my brain makes meπ©
what are the specs on the other side?
Oh nice
Neato!
that is clean
Clc pog
TY
Ok, I digress, you can just see a sliver of it there
But seriously, it's all gone now
I removed the cable and the drive and put it in another machine
what gpu is that
3070 XC3 ultra
god loves you lol
Someone did that day
I waited on the webpage with Please Wait showing for 40 minutes
So glad I didn't give up or refresh the page
yeah
I sadly only now learned about the Newegg suffle
Came with gpu whatβs it for?
Converting MOlex power to GPU power
Don't use it
what cpu?
what was your last gpu
how much did you get for it
$500
almost paid for the 3070
I got the last batch of MSRP GPU's
Before the Tariff hit
do you mine when you aren't on your pc?
yes
no what do you use to mine?
The 3070
nah program like Nicehash
Oh
Trex
Trex for nVidia
Phoenix for AMD
I also upgrade my PC in cycles so I don't do the whole thing all at once
Next year will be AM5 or Intel Alder lake, whichever is better
I can't do that with my prebuild nothing is standered
Isnβt it suppose to align :/
is you pfp you?
What is supposed to align?
Oh, put the GPU in
It'll make sense
π
Yes
Ok I finally got it in do I leave the brackets out and just screw it in?
Yep
Thereβs a little gap here and the screws with the bracket canβt go through all the way
That means it's not seated all the way
There are tabs on the other end of that plate on the GPU
Those need to go further in
I have seen them bent from the factory before so might be worth checking
They should slot in between the edge of the motherboard and the case
Yep you were right
The thingy didnβt lock in before
Itβs so hard to put these gpu cables in with it separate
with what separate?
I'm planning on doing a custom(ish) loop sometime soon. I just need a new case and then I need to figure out how to adapt the fittings on my GPU block, possibly the CPU block. The pumps are already in the blocks, I might even just use those. Get a reservoir and better rads/tubes/fittings... It'd be a fun project.
You can try using electrical tape wrapped around the upper part of the connector to hold it in place while you insert it.
I donβt know if I have that would regular ones work?
@potent portal
Regular tape? Sure it could work but it won't be electrically resistant so cut it off when you're done
My pc immediately shuts off when I turn it on
It wonβt post
Ummmm ITS SAYINT MY CPU IS AT 100 DEGREES CELSUUUS
Wiat what do I do idk if my cpu cooler is providing water
: f
Did you take the plastic film off the water block?
I cry
Yes
My pc was working normally for a while
Have normal temps
All of the sudden?
Go for CL16 memory instead of CL18 and I'd get a nvme drive instead of sata
Other than that looks ok. Guessing you're doing a 5900X and 3090 or something with that power supply.
is the cooler getting power?
Yes
I turned off and on my power supply
You think it might be because of my overcooking?
Over clocking
Pls itβs at 100 degrees and idk what to do π’
maybe
Get ballistix 3600cl16 instead way better than corsair cl18
Tape worked π
or a cl16 version of the same ram for approx $2.5 more expensive
Buy Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3600 (PC4-28800) C16 Desktop Memory β Black: Memory - Amazon.com β FREE DELIVERY possible on eligible purchases
witch one is sata?
the hard drive
Both drives are sata
o yea
I'd get nvme ssd, much faster
mb
Ehhh ballistix ram is better and cheaper tho
yea ig but i got that one for the price of 114, ballistix is probably still cheaper idk
and i somehow got 2 packs shipped to me
so 32 gb for the price of 114
Get this instead of the MX500
https://pcpartpicker.com/product/Brvqqs/team-mp33-512-gb-m2-2280-nvme-solid-state-drive-tm8fp6512g0c101
Well that was clearly a once off mistake lol
Mb
But corsair kinda picks out of a hat what kind of ram die they gonna use lol
At least ballistix you know you getting rev e
i got micron e die i think last time i checked
do they have a hdd nvme?
Doesn't exist
HDD isn't going to use the full potential of SATA anyway, but SSD will definitely benefit from faster interface
whats the cooler brand?
just a reminder, u got the thermal paste right?
I'd get this instead of 1TB. It's 2TB for only a few dollars more.
Yes Ofc lol
lmao
Itβs saying a mix between VGA and Boot
The light switches
No, it says DRAM
Not boot
So VGA and Dram
what's the cooler brand?
Lian li
air or aoi?
Pump may have died if it was working before. Is there noise coming from the CPU block where the pump usually is?
air or aio?
My Corsair lpx is samsung c die :/ but think their rgb ran is a bit better die choice
Iβm just gonna give it time to cool
did you just buy it?
It often is a better die with RGB, the one thing that actually does benefit from RGB
if so, you can return it.
Too bad the LEDs can heat up the memory reducing OC headroom
yea people has told me that the die they use can be very different
yea but i think 3600 cl16 is enough for most people
I built it myself like 2 months ago
I built it myself π¬
And it was working fine
ok had any problems sense then?
But Iβm agreeing with Fal and saying something mustβve died
Nope
Just with the over heating cpu
Not POG
if it's not booting though how are you getting the CPU temp?
I got a warning before it shut off
Hi,
I'm 99% sure the pump on my brand-new Lian Li Galahad is not working (I don't hear the pump at all).
It's brand new and the RGB lights and the fans are working, just not the pump.
Pump is connected to CPU_FAN Header on the x570 aorus master.
When I take out the cable and plug it back it I...
True, most people don't try to push things as far as they can go like me
try this it might help.
And it posted like 1 time to go into the BIOS and then it didnβt post after that
Wack
What motherboard?
Most people don't push at all π
MSI Z490 a pro
Well that's ironic lol
What about us tinkerers ;-;
Thank you, Iβll read into that rn
We get the 4000+ memory usually so we're guaranteed good dies
try connecting it straight to the power unit.
First thing I notice is that the AIO isn't plugged into the PUMP_FAN header
π³
True lol, when i was buying my lpx back in October i wish i thought about ram dies but wasn't really a concept to me at the time, i mean i have a 3600 anyway so it would probs not clock to 1900 fclk anyway i suppose
u know a guide that i can follow to maybe oc my ram to cl14? or is that gonna be too much work lol
also would it yield much benefit if i do so?
I grabbed a Galahad manual, that's what you have yeah? Was the purpose of the ram reseat and CPU cooler remount to fix a heat issue or was there another reason?
HEat issue
Ehh if you don't mind clearing cmos and running ram stress tests its easy enough but time consuming and a lot of trial and error
RAM tests take ages
So the heat issue was present before the mucking about with RAM and CPU cooler? Good chance the pump has died then, it still may be worth switching the AIO pump connection to the AIO pump header though. Slight chance the other header burned out.
Making the straps right in the wires wonβt dmg them right?
Depends if you can get it to cl14 but if you want an improvement in frames in cpu based games afaik it would help
The other option for you and one that I recommend to be sure the pump receives full power is to use the SATA power adapter that came with the Galahad for the AIO pump
Tight
im probably fine with what i got then lol
It's part L in this picture.
Check the pins in #overclocking
ight thanks
Most people are lol
Thank you so much
Worth a shot anyway
If that doesn't work, good chance the AIO pump is defective
Or it's time to take it to a professional π That's the final step for me π
I think Iβm almost done
If I turn on my pc is there any risk if I missed something?
nope
lol just finished a build, pc turns on wont go to BIOS and the power button doesn't shut if off lmao
what a great day lol
Try to find a good professional and let him do it if it doesn't work. If possible ask to be present.
Is this a good CPU For gaming, streaming, & photo/video editing with Adobe products?
what are you paying for it
How much should I give my friend for his 970 fe?
No it's overpriced usually, check 10700 instead
So like 70-100$?
Mind sending the link?
Bc before all this crap I wouldβve payed 70$
He doesnβt know crap about PCs
If I told him it was worth 50$, he would sell it to me for 50$
MSRP for 970 is like 300$
It's a question of how bad a person you want to be
In this market, 970 can fetch like 400$
I want to pay a fair pre crazy price.
No not really where I live at least
Yes, 170-180 was very common for 970s pre-pandemic
Pre crazy was like 70-120$ typically where I live
Then people where you live is either crazy or you're off by a hundred
:p
70-120$ 970 would be just crazy imo
Reason: Bad word usage
Lol no f word
how do i control i fans rpm with a fan hub
Use pcpartpicker.com to find the cheapest price for it
- Plug fan hub into a fan port on the Mobo
- Go into bios and set the rpm curve for it
Yes
if the hub is plugged into the motherboard
Looks good apart from the overpriced psu, get a phanteks amp or enermax revolution df instead
Enermax revolution is literally better and you can get the 850w and still save like 15$
Whatcha mean meh?
Ohh
I think it's only a Memorial day sale too
Is it normal for your cpu to reach 100 degrees when playing a game?
No
Welp
no
Probs a bad mount with the cooler
What does it idle at tho?
Did you repaste?
Yes
That's better than turning it on and having it reach 100 degrees doing nothing
What cpu what cooler?
Lian Li galahad
^
Yeah that's a rip
What CPU?
I510600k
yeah, I think the pump is bad
Original problem was 100C at idle
Full SATA power helped
but I think pump just gave up
Okay, new pump soon then, thank you
Iβll probably get a nzxt
Or just a good white aiocooler
I would just try yojr the look again with galahad or get arctic or ek
This is the 2nd or 3rd Galahad I've seen here recently with a bad pump
Phanteks Glacier is white but can't find a lot of testing on it
You guys think this plastic thing will melt?
Itβs so the cables donβt touch the motherboard
No
Should I use hdmi or display port?
dp
can an nvme m.2 be placed anywhere on the motherboard?
Depends on the board
ooh
Some have sata only M.2 slots, some are NVME and SATA
Gotta check the manual
And some newer Intel boards with 10th gen CPU's disable one slot
so..... XD
B550? X570?
it shows me two options here
what board isit
b550 this is the website
B550 what
asrock b550 taichi
βΌοΈ
and i have a teamgroup nvme 1Tb ssd like it shows there
Doesn't matter which slot
do you need to have a gpu to use your pc to do regular schoolwork?
Need some kind of video out if your CPU has no integrated graphics, yes
does a ryzen 5 5600x have integrated graphics?
sigh its gonna be a long wait
Doesn't need to be anything fancy if not gaming
any recomendations
Anything you can find within your price range. The market is so weird right now everything goes out the window. Maybe find something on r /hardwareswap?
Also, something like a 11500 could be worth a look
thanks for the info!!
Yeah if the parts haven't been purchased yet INtel is a viable option
(11500 is an Intel chip that comes with a usable iGPU)
lol already built the pc without knowing that i couldnt use it without a gpu
Ah
well
Can you return any of it?
Because your warranty and return period are ticking until you get a GPU
probably could return the mobo not to sure about the cpu
any recommendations for cpu similar to the ryzen 5600x?
i meant for intel
11500
apparently i could return the cpu as well
11500 CPU/B560 motherboard
use the same ram and everything else
Might want a better cooler than stock Intel tho
How to click ok?
currently have a corsair h150i elire cappelix
That'll do
it's a button on your monitor
Probably the menu button or checkmark button or something
Hmm I still get no signal did I do something wrong?
Everything seems to be working except the front rgb panel
hey i need some help picking some parts for a pc 1500
I cant get my fan hub to work
I connected it too sata power and the pwm came to my mobo but my fans won't work
The light isn't even lighting up on the fan hub
my sata power from my psu has multiple connectors, am i able to connect multiple things including my ssd and hdd?
Yup
Which one should I click?
To do what?
Donβt I click one of these to get into windows?
which is the best motherboard for Ryzen 9 3900x? i;m currently using B550
B550 is just fine
No real reason to upgrade to be honest
UNless it's a low end B550
Does anyone know if PCI express cards are better than Motherboards with WIFI?
Thanks for the help everyone I got my pc running
Just to keep in mind, most pcie wifi cards are just m.2 key e wifi cards strapped onto a PCB with a PCIe connector, and most motherboards with wifi have that capability via a m.2 key e wifi card under the io heatsink
What is a good gpu that dont cost a bitcoin?
They're practically the same
Like I swear PCIe wifi cards are the same thing on mobos
Well something that goes with 10100
Alright, so which ever i prefer works?
As long as the m.2 chip is decent
Yep
gt 1030
Wdym
Alright so I need some help/ I just upgraded from a 3700x to a 5800x I am using an asus x570 prime pro mobo with 32gb 3200 trident z ram and I forgot to upgrade the bios before installing the new gear.
My issue is that it wont post. I just get no signal on monitor but all my led/rgb lights up no dram light on mobo tried clearing cmos via battery and ctrlcr switch and nothing is working
How much?
about 100 usd
Link
unless its also at scalper prices lol
And will it go good with i3 10100
yep
bruh idk where u live just find it
by searching up gt 1030
u can prob find for 100
And I would like to play gta 5
yea make sure u have the gdd5 version the other one is rlly bad
prob 100+ fps at lowest settings
I want high
but not 100% sure
Like medium
idk I dont play much gta
but on my igpu I used to play low and got 40 fps
so prob 100+ on medium
Hm
I think it will do fine
Do you still have the 3700x?
Anything a tad bit better
Yes, i put it back in, still no post π¦ currently sitting on an empty ssd as well so no windows or anything
@urban trellis
added a new m.2 to replace my old 2.5' went from 250gb to 2tb
gtx 1050 ti or gtx 1060
or you can wait for rtx 3050
Which debug lights light up
is everything plugged in preoperly make sure it is
Ik
The dram at first after clearing cmos none are popping on.
Try reseating ram,
Which is what confuses me the most because i've done at least 20 builds never had an issue like this
I mean try ebay other things r usually scalper prices
on ebay you might find a a cheap one
K
Try reseat cpu
but I suggest a gt 1030
I might go with a gt 1030
Hmm does your board have bios flashback btw
Its the asus x570 prime pro i don't think it does i'm checking the site right now
with simple tweaks you can get 144 fps+
Hmm yeah most x570 donβt have it. It would be with the io
Also, try only single stick in slot 2
^
yea and swap out if one doesnt work
Single stick slot 2? Ok I have 4 of them lol so this will take me a bit. Thank you guys very much by the way β€οΈ
lol 4 sticks
And reseat cpu if nothing
wait how do u reset cpu without a post
Extra reset cmos also doesn't hurt
Read it again
oh lol mb
I know You said you have done many builds, but you have monitor cable plugged into gpu right? Just wanted to make sure
Yes lol
and make sure all of the cables r plugged in properly
ok so after reaseating, the dram debug is now blinking
wasn't doing that before but this is with only 1 slot in
yea then i just suggest a gt 1030
it should get the job done and then just wait for the rtx 3050 or rtx 3060 to come bk in stock
a gt 1030?
nah im saying wait for a 3060 or 3050 to be in stock
I reseated it, tried each ram stick nothing π¦ idk what to do might have to take it to a local shop or something cuz this is baffling me
oh ok a 3050 will prob be 200 dollars but im not sure
Wth
Try taking gpu out
How
Did that
I mean you can try taking out cmos and then trying to boot
without cmos
What about reseat cpu >:p
To clarify, I tried clearing cmos and booting Without the gpu and ssd. without the batter in. tried with both cpus and each time nothing
i'm stumped
Maybe it's as simple as a missed cable somewhere
hopefully let me look over it again
Maybe eps12v isn't fully plugged in
I just checked everyhing on the mobo let me open up the back panel
yea try unplugging cables and plugging them back in
when I built my pc my power cable wasnt in so i was worried
that I messed up
Do they actually?
And when is the restock
No its not released yet but there is a rumor that there will be one
and the 3060 is 300 dollars so it prob will be 200 and 3050 ti will prob be 250
Hm
Alr i gtg now cya
Wait could u help @stoic island
Wat
Find a good gpu that fits inside my 600$ budget
Not happening atm
Like gpus for 600 or whole of for 600
Time limit?
Uhh I'd say Q3 2022 at the earliest we see gPus prices back to somewhat normal
Ugh still nothing I'm going to go at it tomorrow thank you for the help everyone
Worst case dynamite fixes all π€£
Would you say Q3 2022 is a fair guess?
On the early side?
Lol ye
why does my mobo have two cpu connectors?
and do i need to plug them both in? because i have cable extensions but only one for the cpu
yes two 8pin
yea for oc
what does the label say on each slot
I'm guessing it doesn't matter but doesn't hurt to know for sure
https://pcpartpicker.com/list/pYZWqp are these good parts for a pc
Get 3600mhz
ok
yup
Corsair fans
oh
You shouldnt really spend much on rgb
You could save money of you get the rgb version of the 4000
I think
Around 60 dollars
Thats 40 dollar less than the fans
You have on the list
I they dont have the loop but theyβre basically the same
Your choice tbh
Reason: Bad word usage
i mean hey if u got the money and if u want rgb fans that are ez to control i think its either uni fans of ll/ql120s
right?
yea i mean the color shceme is black blue and purple
And 3 sp120 argb fans
but yea if ur ok with 4000x get it for the controller and 3 rgb fans ig
That case has a node core
You save 40 bucks though
U could invest that in a better motherboard
@clever vigil
ok\
Are you gonna upgrade in the future
yes
Then get a 750 watt
Pau
Psu
You have a 30 series so thats fune
Fine
And a new intel chip
Cou
Cou
Cpu
ok
ok

