#building-and-recc-chat
1 messages · Page 159 of 1
Was talking to pato lol
Oh
Yes typical zotac fans
Delta sounds go brrr
Lots of AMD cards sound like that at max too

Fresh install of Windows and got the latest drivers
Hell even the vbios is the latest one
Has it got a second vbios
I'm unsure
If it does try that
"Fresh" tho
As in, today
Since it could have been from corrupt windows in the first place
You can also try pcie slot in 3.0 mode
Sfc /scannow?
That's what I did
Only way to make it work under idle
It's that you basically did a factory reset which means it uses the windows basis it already has meaning if there was corruption it wouldn't be fixed because it reinstalled the corruption
I don't know, apparently it doesn't post hot and displays the VGA post light on mobo
Zotac moment
Board known to work with another gpu?
Looks hot probably
Do you have your gpu still?

A 3060ti
Try gpu in different board?
Try it in the second slot if you have one
Like the 3060 or the zotac 
The zotac
I might be off base but if the board supports x8 second slot you can rule out the slot being the problem child
Hm
It becoming stable, and not just that but idle stable of all things changing slot mode, might tell tale to the slot just not up to the data rate of the 3090
i.e board hardware fault
Try changing vbios as well if you have a second one, can rule out a corrupted vbios
Zotac ships with backup bios chips on their cards (a number of brands do) but for the sake of pedantics you can also rule out that
I'm def leaning towards mobo tho. My X570S did the same crap with my old 3090 when it would post with a vga light, but it was never broken
If none of these things work I'd start checking the pcie slot traces on the card
See if there's any scratching
That's what I thought too and nothing looked too bad
Ah yes, is this a strix b550
Yep
Ok good. That probably has x8 bifucation
Nope it's x4 3.0 via chipset
Welp, it should still tell us if it's gpu
A load test is easy enough to do
Welp, no integrity violations
The mobo tech specs section for this board is rubbish
Less info than the advertising section

Ydp
Here's hoping I get logs!
Crashed again
Really hot to the touch on the backplane side
Ok, did you find a dual bios switch
Nope
Like I'm guessing the card temperature trips
But I tried getting some sensor data out of hwinfo
I'd be willing to even try an nvflash
The hwinfo giving not really any info to me is concerning
Gimme a moment to actually boot
It might be dry paste
It was a show card, like in a store
Part of why I got it so cheap
I'd believe it
But we won't know for sure without either opening it or checking sensors
Could be Zotac forgetting thermal pads 
They liked to do that at one point
UP TO MOMENT OF CRASH
Gpu temps are all well and fine on that graph
Core hotspot mem
It's something else
What cpu have you got
Paste dry
Ryzen 7 5700X
with da paste
Could it be power limit?
Is it still happening
Did you buy it used?
Yes. Was supposed to run fine without issue
If so, maybe mining vbios on it causing issues?
I don't see any other vbios in gpuz than the last one
It's a 3090
Weirdge
580s were very popular to be flashed to mining bios
I would be willing to try vbios flash
There also might be some for 5000 series?
I still think there's a correlation between the heatup and the crash
Bugged vbios could have some play
Since it doesn't wanna boot after being hot
Like why does it get hot
It's aggravating
Temps are basically the same
To the touch it's really hot
Even if you touch an nvme ssd after it being turned on it'll be hot
You got like 30W of power dumping heat into a thin piece of metal at the back
Gpus are designed to run up to 95c core and 110c on vram.(for 3090) so there is a lot of room for it to be under there and still super hot to the touch
It didn't even get close
But what's the cause then 
I'd be worried if it wasn't hot on the backplate
I'd agree with felix and try a vbios flash
It's possible they flashed a different cards vbios to get better efficiency maybe, and it got messed up?
Idk why a miner would mess with bios on a 3090 but maybe it helps and I just haven't heard of it
I would also make sure you're running separate pcie cables as much as possible
My wager is a corrupted vbios rn
Well, time to roll the dice
I've no other ideas so no better option
I would say last of all change the pcie cables around to see if one is faulty
If not that, then finally a brand new windows install on a separate drive
I too would be out of ideas by then, at that point I'd be either sending it to a repair service, getting a refund or combing it with a multimeter
💀
Trinity OC vbios iirc is like 345W
If you need help finding one off techpowerup
Can I use a rx 6650xt on a 500watt psu
I gave up. Put my 3060ti back in, and messaged the e-shop for refunds
Did asus fix their issue with AMD boards?
So my pc randomly turns off and when I turn it on there is a red light at the ram for a couple of seconds
The guy with the asus g27aq took his listing off the market while we were in the process of meeting up, found this though.
That's a good monitor i have it
ight
hello everyone. I'm new to this server but I'm having probs with the system resetting every 10 seconds and the monitor advises no signal. I have tried resetting the bios, removed the video card, changed memory configuration took apart and reassembled, verified the orientation of the CPU, unplugged all connections on the MB except what is essential to start the system. Anyone have any thoughts on this.
Parts list: Intel Core i9-13900K - Core i9 13th Gen Raptor Lake 24-Core (8P+16E) P-core Base Frequency: 3.0 GHz E-core Base
GIGABYTE B660M DS3H AX DDR4 B660 Intel LGA 1700 M-ATX Motherboard with DDR4, Dual M.2, PCIe 4.0, USB 3.2 Gen2 Type-C
CORSAIR RMx Series (2021) RM850x CP-9020200-NA 850 W ATX12V / EPS12V 80 PLUS GOLD Certified Full Modular Power Supply
WD_BLACK SN850X NVMe M.2 2280 2TB PCI-Express 4.0 x4 Internal Solid State Drive (SSD) WDS200T2X0E
MSI Ventus GeForce RTX 3050 8GB GDDR6 PCI Express 4.0 Video Card RTX 3050 Ventus 2X 8G OC
Cooler Master Hyper 212 EVO V2 CPU Air Cooler with SickleFlow 120, PWM Fan, Direct Contact Technology, 4 copper Heat
G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C16D-32GVK
Corsair 4000D Airflow CC-9011200-WW Black Steel / Plastic / Tempered Glass ATX Mid Tower Computer Case
Couldn't take the picture but these are the specs:
ARMOURY Gaming PC AMD Ryzen 5 5600 GeForce RTX 3060, 1TB M.2 NVMe SSD, 16GB RGB RAM, Wi-Fi, Windows 11 Home
A pretty basic low-end computer
Do you guts think this Is word recommending to my friend
It's also 1.1k
CAD
If your using it for gaming and play multiple games I would upgrade to a 2T NVMe and 32G RAM
Yea but he's only 12 I doubt he's using it for much
You're running a 13900K on... A B660M DS3H...?
Think it'll get his job done
Don’t forget the cpu cost more then the gpu 
Yes Slovskii I am
YK nevermind that
I just realized LMFAO
Though it's a Intel chip
So most likely not a gaming rig
Def not
Hmmmm
Anyways what do you think about what i said
Any error codes or something along the lines of that?
Have you had previous GPU's in the rig?
How recent are the drivers?
Did you install the OS yourself?
Nah Nvidia cards recently have been trash value, is it prebuilt or diy?
I plug it in turn it on, it powers up but no signal to the vid, whether I use the vid card or not
Have you tried the system with just the cpu and without the graphics card?
but then it just starts to recycle power every 10 secs
Yes Pato I've tried it both ways
Hmm I'd say something is faulty, what is hard to tell, I'd try updating your bios with bios flashback, i think gigabyte call it qflash
It'll say how to do it in the manual
It might just need a bios update for the gen13
Yeah that's why i said it, but also if this is a new system I'd get a way better cooler and motherboard because you're really gonna be limiting your actual usefulness of the cpu with such a low end board and cooler (on like the hottest cpu)
OK I'll try the qflash and see if that works, will take some time but will try it
(Didn’t notice you already said it was googling 600 series chipsets just too double check
)
I bought a liquid cooler for it but it won't fit the mid tower case
Which cooler? Because most fit the 4000d airflow
MSI MAG Core Liquid 360R V2 AIO Liquid CPU Cooler, 360mm Radiator, Triple PWM, ARGB Lighting Controlled by Software LGA
And also the motherboard is severely underpowered
It will fit on the front
Although still way better options available
The first thing I noticed reading the parts list
B660M DS3H paired with a 13th gen i9
Yeah....
What is the prob with b660m and the i9?
If you want the i9 running at like, half the power, and locked settings at that, while also running the power delivery up quite hot (won't kill it but will probably shorten the lifespan), that's what the ds3h entails
Also with a 3050, you really shouldn't man 💀
Prebuilt
The b660m ds3h is one of the lower end b660s, vrms are cpu power delivery, and the vrms on that motherboard are not good
It's not b660 in general it's the specific b660, it doesn't have the capabile power delivery (vrms)
Are you gaming with this pc?
If so the 13900k with a 3050 is not a good choice
The 3050 is a very low end gpu that a ryzen 3600 is even overkill for, or a 10400f
does that include the AX variant?
Yes, they're the same board, the ax just has wifi
Have you already bought all of the parts?
And if so are you able to return them?
For like $1500 you can do a 7600 and 6950xt build that will be much better
$2000 or so gets you a 7800x3d 7900xtx
Well there's a possibility, albeit small that it might be okay depending on their use case
got them from Newegg and it's assembled so returning could be a problem, but I did use their pcbuilder so they might return some parts as that system seems to be wonky as it should advise when parts you choose aren' t compatible
Bacca are you in Can or US
The newegg system builder is complete trash
US
But I can make a list for Canada if that's where you are
newegg system builder
I am in canada
Kk, one minute
They're technically compatible, which is all they advise on, although in practice they should actually pretty much never be paired with each other, whats your use case for the pc?
What is your budget
well as of now 0 but if I am b=able to return stuff, it will go up
Yeah refund as many parts as you can apart from the case maybe, although preferable as there's better options
What will it be if you can return every single part
Kk
2600 would get you a top of the line gaming pc if you were smart about it
For gaming the build you got rn is the exact opposite
well I apparently am not that smart...heheh
You say that like there's a manual for it
No
You're not dumb
Part List - AMD Ryzen 5 7600, Radeon RX 7900 XTX, Fractal Design Focus 2 RGB ATX Mid Tower
💀
They don't teach these things
Hold your head a bit higher, marketing gets the best of anyone
Beautiful
Maybe pick a better case for aesthetics
Could get an aftermarket cooler if you want cooler cpu/better looking cooler
That too
i9 + 3050... the laptop build
Fr
Part List - AMD Ryzen 7 7700X, Radeon RX 7900 XTX, Deepcool CH510 MESH DIGITAL ATX Mid Tower
Nice price on that ag620
ok thanx Bacca for that list
Yeah, could go ap201 case or even up to like, y40
Strips the hell out of the other pc tho even after taxes
Links to where to buy each part are in those lists
with shipping and taxes it will probably be over my 2600 budget
yes
Alr
Could go down to 6950xt as well
this is already about 5 times better than your current build so dropping a bit is not going to hurt
I like the old case
https://ca.pcpartpicker.com/list/Frvd8r @ocean lichen better?
Part List - AMD Ryzen 5 7600, Radeon RX 7900 XTX, Deepcool CK560 ATX Mid Tower
Tell me how far off and I'll shrink it more
Part List - AMD Ryzen 5 7600, Radeon RX 6950 XT, Fractal Design Focus 2 RGB ATX Mid Tower
of course this would all be deendant on Newegg RMA'ing everything
I see you're replacing the memory, is that necessary
Rmaing is different from returning
Don’t know how much more you spent on them but the case nvme and psu are probably fine to keep imo 
well if I don't get a RMA number I will probably have to pay the shipping
Rma is sending something back to get repaired
So do not rma it
You have to return it
well I would like to keep as much of what I have to cut down on everything, apparently the mb requiures flashing to the f21 ver and I have geforce rtx 2060 vid card in my other machine that I could switchout
2060 is better than 3050
it's MSI as well
by a decent amount
thank everyone for your input, I'm going to flash the bios and put in the 2060 and try it tomorrow when my helper come again.
probably a stupid question but since I am actually interested in upgrading my 6700xt in the future, why do all of AMD's gpu manufactures prices vary so much? i know color/vram obv play a part but almost all of these seem to have the same specs
is there an actual benefit to buying a more expensive one compared to a cheaper one say from asrock compared to sapphire
9 times of 10 no
The occasional model might ship with a custom board, binned chip or higher power limit but that's really it
wdym by custom board
Not all cards are created equal
Like motherboards, cpus etc
But if you don't understand what it means, there's no value in you spending extra over the best cheapest price
alright
if i were to stick with team red in the future and upgrade my current 6700xt (from asrock), what brand should i prob order from
i dont really care about overclocking

And without knowing at the time what's the best value we don't have an answer
Cheapest is often best for gpus but not always
anime girl
please don't with this "team red" "team blue" "team green"
just don't
Why does my motherboard show red on top of my ram
It stays for 20sec then goes away
Read your motherboard manual
Please just say AMD, Nvidia, intel
isnt a 1660 like $200
yea
I feel like most prebuilts at this price range just don't have a dgpu
probably just how it was configured given it started life as a high end office pc
it's gonna be 2133 15-15-15 though
It also has 3tb
Would there be any issues fitting a 170mm figure in a G300A with a 340mm GPU?
I have the CPU (Technically), AIO, motherboard, SSD, case and PSU
One second
I want to put this
Main Rig (rev. 1.0) - Intel Core i5-13600K, Radeon RX 6950 XT, Phanteks Eclipse G300A (1 Fan) ATX Mid Tower
Is this side the intake or the outlet
Intake I believe
Tysm
👍
The air typically flows from the hub side (facing as pictured) through the fan and out the grille side (opposite side facing)
There's reverse flow fans that are getting more common, you can tell them by comparing the fan blade layout to regular fans
U can also tell by the scooping side on the blade of the fans
usually the intake is free of frames, the exhaust usually have the cable and the frame.... usually... most of the fans (if not all) have an arrow pointing the direction of the airflow anyway
how capable is the 6700 xt for 1440p vs 1080p
deciding as I want to get a proper monitor within the next few weeks
It's fairly capable at 1440p
Don't expect max settings in cyberpunk or anything but most games it's perfectly acceptable
i dont play super demanding games all the time
cyberpunk doesnt interest me at all anyway
plus you need like a nasa pc to run it it feels like
Even the 4090 struggles to hold 60 fps at 4k max with frame gen on lol
also I dont play fps's really if that is a consideration to make at all
Nah those are usually more CPU intensive anyway
most demanding games ive been playing recently are resident evil and minecraft w/shaders
but i'd like a proper monitor anyway for the future
so guys
I came across a problem
well, one of them my usb splitters won't be here when I get my case
the other one is
I bought 6 fans for the lian li o11d evo
and it looks like everyone is running it with 7 fans 
what would be the best fan to remove (for now ofc)
don't want to wait till I get another fan to be able to use the pc
I guess if I'm lucky enough
I might get it along side the gpu and the case
Just leave the rear exhaust off. Nothing prevents you from using it like that.
That fan is rarely important at all anyway
well, thank god I came here to buy the fan at least
I sent the usb splitters to somewhere in the street

didn't specify the house
Oh no 😅
need an aio there to make it clean
the huge tower cooler is killing the aesthetics xD
Which expo version should I use with asus
1,2 or tweaked? I’m not very caught up on expo
1
Whats everyones go to MB company looking at either Z790 Master, Z790-E or Z790 Ace by MSI
Whichever is cheapest and has the features that I want
Who has better software you think and bios and stuff
I don't use the first party software, they universally suck. Bios I'm indifferent on. I've mostly used MSI and it can be a little unintuitive at times, but Gigabyte isn't any better in that regard, nor Asus for that matter. Asrock I've heard is a decent bios but I haven't used it personally.
So in conclusion they all suck
Yep. So I just go for the cheapest that has what I want lol.
lmfao thank man
ive been a MSI person and i heard ASUS got some bad rep as of late. I love the look of the MSI 4080 and MSI ACE
The asus issue recently was mostly overblown. It took them too long to respond to the press regarding their warranty language and xmp/expo combined with the amd cpu issue. All of which is resolved.
funnily enough you asked the same question days ago and we gave you the same answer xD
whichever is the cheapest
all of them are overkill for a 13600k, just get a z690 instead
a z690 a pro or an asrock z690 rs are solid and more than enough options
Or b760m pg riptide if it's still at that amazing 130$ price
Bclk oc go brr
Then some cheap as chips ddr5 and you're tearing away from the ddr4 z boards
Nyoom
Does anyone by chance have a stacked set up with a 48 inch and something like a 27 inch on top?
I have the 27 inch as a side monitor but looking to stack it and trying to figure otu an arm that doesnt cost $500 for the 48 inch
Imo asus and gigabyte have the most organized bios
all mobo bios are basically the same tho
i heard Gigabyte software is garbage
I might do a Asus build it has more USB ports and all for streaming which i need
Well if your budget for a mobo is around 500 the aourus master has more usbs then the strix e
If you need USB, can’t beat the Aorus master
And ASRock RGB software
Assrock
Strix is a glorified prime board
I will have a nh-d15 aswell, till I buy a new cpu
then I'm either buying the galahad II
or the deepcool ls720
Is the Gigabyte Master a overall reliable well built board?
Also at least MSI and Asus has better looking software look at Gigabyte control center it looks like utter garbage
Why not stay with the D15 thats a great cooler
aesthetics mainly 
get the D15s chromax then and black it all out lol
or corsair new aio so its single cable then
that's the one I have

It’s an amazing board
It has a 18+2 power phase or a 19+1 iirc
And the memory speed can go higher then the strix e
well...
my gpu might be delivered monday

(that's depressing cuz I don't think the case will be delivered monday)
Yep I’d say it is
Not the best for ram overclocking tho
Any idea on how I can clean this up?
The pic on the left is where all my cords end up, the white cord is my keyboard bc I’m not sure what I wanna do with it
Attach the bar to the bottom of your desk
I have one of these bad bois mounted into the underside of my desk
Without seeing the fbm listing it's hard to tell but that's definitely triggering my BS detector
Probably bs because it comes out at a loss
hold up let me send
Looks a bit sus
sussy
I'd run a reverse image search and see if they stole the photos from somewhere. I'm guessing that either this PC doesn't exist or it "fell off the back of the truck" and as soon as you try to register it you'll get police knocking.
it does looks scuffed.
It seems like stolen pics or stolen box of pc
I wouldn't be surprised if it's a shady part of neighborhood if you feel brave enough to go see in person
he’s from dinky town anyways
(a place in minneapolis, not racist i promise)
it’s a popular place, but sometimes sketch.
maybe I have him meet up, open and test
Or just not respond to intelligent questions
Scammers can tell an easy mark from the first 2 messages
dude he’s such a scammer
also G27Q vs G273QPF
150$ vs 160$, both used
the g27q
g273 is msi i believe
also i don't like judging with prejudice, but the attitude and looks in that pfp of the "seller" ain't looking like a legit guy
likely a thief lol
naah that's wild
just cuz bro is light skinned (for every effect, I'm joking)
I would've said bro was a thief cuz his name is tango
aint no way bro is gonna be legit with that name
name checks out indeed
either have cops on your door or he's boutta put his knife in your gut if you don't wanna buy

Also potentially a "cash only" scam where they rob you when you show up, and they'll only meet you in sketchy areas like abandoned stores
Exactly
It's pretty common, they know you'll have at least 500 cash on you
just needed to be smart and use card
Probably gonna even take your car if you have one
portugal added a way to make payments without having money on you
basically a card transfer
Normally they don't go after the car, they want a quick getaway and stolen cars are easy to track
but without needing iban or other things like that
fair enough
they just take your wallet and dash
probably not even gonna take your phone
phones can be tracked too
the US is a weird place
you gotta walk with a glock
to be safe

at least in europe you can run from the knife
Yep. That's why I'd you are paying in cash you don't keep the wad on you. You leave it with your buddy in the running car, ready to dash if needed.
it's not like they will throw it at you
Question. How much of a difference would kryonaut extreme be vs regular kryonaut in a water cool? Two 360mm radiators, a Asus ROG Strix oc gaming lhr 3080rtx and a Ryzen 9 5900X @4.8ghz. going to be doing thermal paste AND pads
@little osprey @potent portal @obsidian wigeon i’ll just have him meet up at the cop shop LOL
LMAAAOOOOO
ya g273 is msi
but is there any difference with g27Q>g273?
g27q just better
nope, not meaningful enough
extreme is able to still do its job at extremely low temperatures
like ln2 overclocking
yes
Well... extreme lower temps
I'll go regular then
I'm switching over with my next GPU upgrade
in any normal circumstances it's often worse or not any different in terms of cooling performance
again worse by like a degree but not worth paying extra for of course
8000 series will probably be like late 2024 tbh
That's fine
I have $3500 debt for work to pay off
By the the 7900xtx will probably drop in price even more too
yeah
radeon gpus drops price pretty quickly
and steeply with next gen being around
I paid $1500 for my 3080. I'm in no rush
mhm
As if the 20th it was 1049.99 usd
About the same I bought my 2060 for

If you want to overpay, just send me a message, I'll redirect you to the worst shop I can find
My brothers... I went to the tech shop to buy thermal paste
I started looking at the prebuilts
And left the store without the thermal paste
lol
Most I paid for a 2060 for was $350 for a EVGA xv 12gb 2060
there’s a 6800xt for 380$ used but it’s in nebraska 💀
I got robbed, more than the monitor fella
oof
Lemme show ya
Agreed
I told ya, I'm a master in getting the worse deals possible
I got a $300 Asus keyboard for $40 cash
It wasn't opened and dude had the receipt
🤷♂️
I got the Asus ROG Crosshair VIII Hero Wi-Fi x570
I bought it brand new
Sounds like MSI
Msi full power I ain't even gonna cap
Don't worry, my brother has the ASRock taichi b550
He broke all the 3pin ARGB pins off his board
That's wild
And burnt up one of the USB headers
He doesn't even use the USB ports on the case
Took more than than I am proud of
How did he managed to do that what
I mean, I burnt an extension with only a pc, a heater and a sub woofer
Well, I also had a rooter, but I'm sure it didn't impacted as much as the rest
He used the lian li sl unifans
The RGB controller uses the USB header
RGB controller fried

I will say this, I hate lian li fans
I bought them aswell
They are so much THICKER and wider than other fans
They didn't even fit in my case properly
We like them like that
And the RGB was trash
I bought the o11d evo, I should be fine 
My case is an exact copy
Looks chonkier
With my GPU upgrade I'm probably gonna get me a distro plate as well
I was looking to buy a anti sag backed, Idk if it is worth for a 6950xt
I think a distro plate would look better honestly
Hmmm, I'll see it 
A lotta extra things I had to buy with having that case
7 fans and 3 USB splitters already
isn’t that the case that has a demon slayer ver of it? 💀
What exactly are they expecting those rear chamber fans to do
Is there something necessarily wrong with a Dell 3090
Like, an OEM card
It's a 2 fan
The engineers were getting bored
Just fan curve, then
Also; my 3090 troubles story update.
Returning the thing, need to send it to Poland. The return address has a business called "Pro miners" at the premises.
The 3090 being an old mining card would explain so much.
Especially since it arrived with dry paste
Just save it from the abuse 😔
It's died
All the same
I'll send it back, then get my money. And get this POS
It's a Dell OEM, that has been apparently pulled out and checked over.
you don't want to even mess with fan curve tho
since it needs that high rpm to stay cool
Get some P12s and tear off the shroud
ah
Kinda weird, is the cooler just not good enough for it
Just fine is what I need. I'll probably just replace the paste and pads and be happy with it
I don't overclock and the only high GPU use thing I do is Stable diffusion and VR.
Basically yeah
Can also swap the fans for storage drives
They still work
Better than nothing
And they're actually straps so you can adjust them
never had much issue with nothing
I'm sure there's examples of nice carry handles
I don't know what that case's looks like
So fun thing, will be getting a founder's edition 3090, more likely than not. As replacement GPU.
I'm so happy and livid at once
Was a stress test
What ya get?
BRAND SPANKIN NEW LENOVO GT 730 LET'S GO
that card looks so nice

I don't have my driver installed yet but it's running a-okay
I put another 8GB stick of ram in for good measure
and I finally got a front fan properly installed
it's a 70mm fan made for old AMD heatsinks
the largest size that would fit in the front, and it's PWM
oh
I think Windows installed a driver for me
I was trying with GeForce Experience
and it wasn't working lol
was considering DDU
alright now I can get the latest one 😎
I am drawing a blank here, but when updating bios.. What filesystem does my USB stick need to be?
I believe it's FAT32, but I rarely update bios so I just can't remember for sure.
I've never updated bios so
hmm
geforce experience is frustrated with the latest driver
oh well
I have 531.79 at least
Well dang
I think I found out why it's running 20° hotter than my cpu
oof
What I don't understand is that I don't even use that port
maybe that's why
if you had something in it, it would have some structural bracing to reduce the warping
I'm sure that's why 
How much sag was there?
If u were using that port might e just bent the pcb
enough
I feel like the PCB bends regardless of whether you use that port
Good mother of god fix that before the card dies
why won't it let me select factory reset?
What are you trying to do?
just trying to fix my drivers
i still never fixed them
ive had games just freeze/crash mid game still
ive had issues with my gpu just disconnecting entirely
idk how to do that :/
?ddu
DDU (Display Driver Uninstaller) Guide by Pato
https://github.com/NeweggTechie/Graphics-cards/wiki/How-to-use-DDU
thats handy
ty
will booting into safemode like wipe my pc
as in i have to reinstall everything
games etc
nope
All safemode does is load basic of basic things that are needed to run the most basic part of your windows
ok i'm misunderstanding this then sorry
We use safemode with DDU because it will load a generic display driver so when you uninstall the graphics driver, it can completely do so since no part of that driver is in use.
The link that was sent for DDU explains what it's for and what it does.
I’m in safe mode on my Pc rn (I’m on my phone typing) and it’s saying I have no internet
I selected the option with networking
yep
Ok whatever it’s fine I think
You don't want internet
You don't want to be connected to the internet when you start back into normal mode either.
basically you want the GPU drivers you need before you start DDU
That way once you've uninstalled the GPU drivers with DDU you can boot back into normal mode (with no internet) and windows won't try to download/install some random GPU drivers it thinks you need.
When I go to open DDU it just keeps saying to extract
And I click on it nothing happens
right click the zip folder it came in and then click extract
there is no zip folder it won’t let me extract it
I open the file, click extract and nothing happens
DDU (Display Driver Uninstaller) Guide by Pato
https://github.com/NeweggTechie/Graphics-cards/wiki/How-to-use-DDU
you might have not plugged in another internal usb cable to the board
They're usually combined but just make sure that there's no unplugged headers yeah
And make sure the one already in is plugged in fully
Is the Corsair vengeance LPX 16 gn RAM good it DDR4 -3600
no
corsair ram is overpriced and subpar
are you in the us?
No I’m au
Okay then what ram do I buy
what is your budget for ram
Also how do I chose a psu
and what cpu is it being paired with
I don’t mind just unser 100
what cpu and gpu do you have
Intel i5 12400F
I havent chose a gpu yet idk what to chose
have you bought anything
I wouldn't buy those, they're all pretty overpriced
whats your budget for the whole build, I'll make you a list
1000 - 1500
Thank you
Okay I’m from au so things here are pretty over priced haha
opinions on this? https://au.pcpartpicker.com/list/YBvFJM
Part List - Intel Core i5-12400F, Radeon RX 6700 XT, Cougar Archon 2 Mesh RGB ATX Mid Tower
I’ll check it out
does it seem like it fits all your needs, or anything specific you need?
the mobo does have wifi, that's what the "ax" means
the cooler isn't needed, the 12400f comes with a stock cooler that's fine to cool the 12400f
Ohh okay
I’ll see check everything and I’ll see if this is good and tell you
But thank you
can buy a cooler later down the line if you don't like the noise
kk, any questions feel free to ask :D
Okay is there another motherboard it’s jut because the company I’m buying it from doesn’t sell it anymore
Is that the best motherboard compitable
Is it better if I buy it there isn’t really a problem I can buy it from another company
what company are you buying from? it's better to buy from multiple retailers, as one retailer won't have the lowest prices for all products
Oh from scorptec I think it’s called
I did. find it tho
im sure it's higher priced thoughj
give me a min, I can make you a list, it won't be as good though
or it'll be more for similar performance
No no it’s okay
Part List - Intel Core i5-12400F, Radeon RX 6700 XT, Cougar MX330-G ATX Mid Tower
Just a bit not a lot
it's not that much more
main difference is gpu, and the psu is worse but it's also cheaper, and still fine with a 6700xt
Can I stick with the first list u gave me it’s good right?
yes definitely
Okay
Is the gpu u chose like good
I NEEVR heard of it
I only know like 3060, 2060, 4050
That there agoood
So idk anything about the one u chose
6700xt performs between 3060 ti and 3070
Ohhh okay
if you'd like and 3060 ti is similarly priced you can switch to that
meh, if you're just gaming personally yeah
ofcourse
Is the
ZOTAC GAMING GeForce RTX 3060 Twin Edge OC, 12GB
Good?
Or any better?
/compitable
nah, the 3060 works with it but it's a lot worse, I'd only go for a nvidia gpu if you changed it to 3060 ti or 3070
the 3060 12gb is about 35% worse than the 6700xt
Should I’d stick with ur choice
Btw is urs good for running games like Minecraft with shaders
Or games like six siege etc
Rust
Like games like that
yeah definitely
especially rust, rust likes amd gpus
as long as you're not trying to run RTX in minecraft you're good
rtx is ray tracing
if you don't know what it is you won't be running it I'd imagine
the rating doesn't mean much, it's the efficiency
there are gold units that are prone to catching fire
I tend to go by the tier list pinned in #cases-psu-and-cooling , A tier is the best tier
masterwatt is B tier
yeah it's definitely a solid psu
None
I like eveything u chose
It's just that one port and I never use it
yeah dude im happy to help
it's gpu sag, if it continues to get worse the gpu will die
get a sag bracket
I don't think you sag would effect only ONE port tho
you can see the others are slightly sagging, the entire gpu is at an angle
it's just gradual so only that one is bad
It's not about the port it's about turning the pc on one day and having a vga boot error or dead vram chips cos the card died due to pcb flex
Esp on a 3080 you're highly suspect to a dead vram chip near the pcie slot, don't say I didn't warn ya
boutta become proud 3080 brick owner
Boys, double check me for insanity, but on a 3090, this power plug should fit s 12VHPWR cable, right
It's a Founder's edition 3090
i would just get a cablemod extension for 3090 fe
I'm not sure about the extra 4 pins 12vhpwr has but the 3090 connector given is safe
Did you not get pcie 8 pin as well?
It'll come with the PCIE 8pin too, I should have the card by the end of the week
Just need to know what to prep/get besides paste and pads
I'd just use the included adaptor
It's a 2y old GPU and it spent its life as a SLI brick for a VR arcade
And apparently it's 2y old and never repasted

Yeah because they don't need to be repasted for like 3-5 years
Generalising all cards tbh, some last longer than others, also need is debatable when it'll usually still not be throttling yet
It's not very noticeable with the extension tbh you can hide if away basically if you have a case the size or smaller than a 4000d
That's how mine looked although i just realised bottom got cropped
strongly recommended
They're really cheap anyway, or you could use lego or something else thats the height of the card you can use for support
Bet, I'll just need to find one then
I have a 3d printer so I'll be printing mine
Can confirm, my 3060 ti still has Temps within 3c of when it was brand new
That's not 100% accurate since I do have better airflow then I used to
But it's within margin of error
my cpu has temps 10C lower than when it was brand new
😎
they're pretty easy to find for a couple bucks
I would think so till I started looking for one

plenty on amazon
Yep should run like 10$
I would recommend the stand ones and not the pcie slot ones
I'm asking because I can't find any relevant information as to what kinda effin connector it is
And if it will fit 12v hpwr
Because it doesn't have those tiny 4 extra pins
Like, I'd like to use the PSU cables preferably to the Nvidia ones
hmmm, idk if that would be possible in a lian li

I might be blind
but wouldn't the gpu be too high ?
its nvidias propietary 12vhpwr connector experiment before it was officially released as a standard (only like a year ago)
oh o11d?
o11d evo yeah
Yeah but is it the same connector, fundamentally
Like
yes but idk if youd damage the 4 pins on the psu cable
i assume you have fans on the bottom?
I will put them in the bottom yeah
I have 7 fans
I'm thinking of when I change the cpu buying a water cooler
Fekh, I've got a meshify C, so I've have no idea how well it'll reach if I pull it through the gromits
DUSTY
this should work, it wont provide as much support but thats just what you gotta deal with when you have an o11 https://www.amazon.com/upHere-Addressable-Graphics-Adjustable-G276ARGB/dp/B091CFKQC9/?th=1
theres plenty of room, its an extension converter, it doesnt go directly into the psu
barelyy
I know that, I'm just worried I'll have cables flapping about in the case
beeet
thanks 
I'll try to see if the spanish amazon have that
thats nothing you should be worried about
It's ok, mine is dusty dusty as well. My white fans are basically impossible to keep white now.
I absolutely will worry about the aesthetics of the dark glass case which is facing away from me on the glass side because I'm left handed
should have gotten ya an o11d evo 🙂
oh if youre in spain theres this, https://www.amazon.es/EZDIY-FAB-20190611-Tarjetas-gráficas-GPU-Halter/dp/B07X8P71WQ/ or this https://www.amazon.es/EZDIY-FAB-Soporte-tarjeta-gráfica-RTX3090-309EZ-Negro/dp/B0946L8KB8/
EZDIY-FAB Soporte de Tarjeta gráfica ARGB, Soporte de GPU, sincronización de Tarjeta de Video RGB Sag-Sync con Placa Base 5V 3pin
I like my meshify C
Nothing wrong with that.
well, I need to use spanish if I want next day delivery 
yeah smh
I was just meaning, because you could build in the PC to have the glass facing you while PC is on left side.
poortugal diff
It's fine. I'm really thinking of buying new fans.
but I don't really want Arctic White ARGB fans though
they look funky
i mean you can ask around more or try but i wouldnt risk damaging my cable or gpu personally
Basically yeah
and because they have the weird ring that connects all the fan blades.. I can't clean it easily.
I'll try to find the 2nd one in white theeen
thank you 
It's a chonky ass brick that threatens to break my spine whenever I pick it up
you dont need it immediatly, you can put the gpu in and wait a while and still be fine, its just a matter of the weight over time
I have that goofy ahhh 140? The big radiator
In front
I mean, I need to wait for the case anyway
no problem, basically any will work, i just searched "gpu support bracket"
Yeah, I can barely lift my own PC up. Especially right now since I'm on a >10lb weight restriction
hate to break it to you but meshify c is small
compared to my O11D Evo?
Excuse me what 
yeah I guess my case is a tank
How is it a small case
ay at least it's not the XL version
its a small mid tower
that is a whole deadlift setup
just compared to a normal -large mid tower like the phanteks g360a/p400a/g300a/ corsair 4000d
oh yeah, I'd say the 011d evo is comparable to 5000D
I'm getting the same one
Slightly wider, but slightly shorter
ye
You won't regret.
well, IT SHOULD BE HERE ALREADY
BUT I GUESS POORTUGAL DOES NOT WANT TO WOORK
it wa shipped from a few miles away
I could've gone there and buy it the same day
it's been almost a week already
Pain meds have finally kicked in. I feel so much better. I woke up and couldn't go back to sleep. On the bright side.. I was able to sleep on my right side this morning... Still can't sleep on my left atm.
oh, I thought we were in gen chat
sorry guys
I hate buying cases because of how long they take to get to me.
That's why I try to buy cases preemptively
it was supposed to be here since 2 hours ago
meshify c dimensions: 395 x 212 x 440 mm
phanteks g360a dimensions: 455 x 200x 465mm
4000d: 466x 230 x 453mm
its on the smaller side yea
the meshify c doesn't look that big
its h x w x d btw
I used to have the 4000D. When I first got it, I thought it was huge
bro...
the gpu came from spain
and it's here already

Then I got the 5000D and realized.. bigger is better
Idk where I'm going to put the case ngl
eh, I dont think I'd want bigger than a mid tower
That's because it's smaller and lighter. The heavier stuff takes longer because they have to take more care with it. They have to straps things down more.
would be huge on my desk
in the future I think I'd like an Itx build, or atleast matx
fair

but again
it was just a few miles
it was in mem martins at 10am
I had custom built my stand for my PC remembs?
ahh true, I forgot about that
cases are big and heavy tbf
transporting my old pc to my partners house was fun
It sure doesn't feel that way
I wedged a small stuffed anime between the monitor and my car seat so it wouldn't wiggle at all
