#building-and-recc-chat
1 messages · Page 132 of 1
so I can use a DDR4?
Yes
They were talking about am5 n stuff
Basically the generation of CPUs after the 5600x
it's the 7600 that needs ddr5
the 5600 and 5800x are 100% incompatible with ddr5
so a ryzen 5000 configurator should not list ddr5 as an option
does it have an option for ryzen 7 5800x3d?
ddr5 is for the 7600
I was saying if you really want to burn more money get a 7600 or 4070ti, not a 5800x
or a 13600K, or a 5800X3D
just not a 5800X
what's your memory running at
any overclocking?
on cpu/ram
I was doing expo but I turned it off
yea
processor
currently there's only one GPU named 7600 and it's far too old to recommend
which is a perfectly good choice
And just to make sure for the 100th time....
It's similar to the Ryzen 7 5800x?
i was just saying that if you WANTED to spend more (since you seemed to) there are better places to spend it than a 5800x
EXTREMELY similar
i mean
if none of us can convince you
maybe this can
Our benchmark and review of the AMD R7 5800X CPU looks at its performance versus the AMD R5 5600X, R9 5900X, R9 5950X, and Intel competition. This one is the shortest of the new reviews.
Sponsor: Arctic's Liquid Freezer II 280 on Amazon (https://geni.us/RJBy) or the P12 fans on Amazon (https://geni.us/CRzG8)
Our Wireframe Desk-Sized Mouse Mats ...
AMD's Ryzen 7 5700X CPU follows-up the R7 5800X, but at $300 instead of the original $400+ price-point. That puts the R7 5700X vs. the i5-12600K, primarily, but also AMD's own R5 5600.
Sponsor: Buy Thermaltake's Tower 100 Mini-ITX case on Amazon (https://geni.us/TuAASGt)
This review and benchmark of the AMD R7 5700X CPU tests the new AMD releas...
I know the value isn't really 'there', but what constitutes value as a tech enthusiast? Having the lowest latency and best overclocking CPU in the AMD Zen 3 line up? Well if so, then that would be the CPU I would go for (personally) when building a new high-end gaming CPU... AMD know to charge that $50 uptick more in relation to core/price ratio...
Join us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
AMD Ryzen 7 5800X: https://amzn.to/32cX9uB
AMD Ryzen 9 5950X: https://amzn.to/32gHUAN
AMD Ryzen 9 5900X: https://amzn.to/3kUa1gq
AMD Ryzen 5 5600X: https://amzn.to/3evOFn9
Video Index:
00:00 - Welcome back to Ha...
.
5800x is only really good for gaming really. since its on one CCD
I would know, I have one
4070? also fine
https://forums.tomshardware.com/threads/several-question-for-troubleshooting-my-unstable-ram.3746067/#post-22586278 mushroom I think this the probably I'm having is the same
Hi, I have a question. I have a Ryzen 3600 on a Gigabyte X570 Aorus elite motherboard. Two days ago I bought new RAM. upgraded from 16GB to 32GB and decided not to save and buy a high-quality 3600MHz cl16 memory (Gskill trident Z). This should be optimal for Ryzen 3000. The first day went fine...
4070 is decent for the price
nothing amazing, just fine
Compared to the 3060?
its roughly a 3080 with less power draw
beats the crap out of a 3060 lol
3060 ti?
...
what?
i was telling him to read what you said lol
oh
i'd sure hope a 3080 beats a 3060ti
Nono the 4700
yes, it will
4070 has 3080 perf
so yea, a 4070 is a good choice, the mid range ryzens are good, intels i5 13th gen is good
Bet
12400 usually better than 13400 due to pricing
2x16 is preferable
Figured
if you can go twin stick 16's
but they are probably doing 4x8 for looks
more stable
But it's still fine though right?
should be
quad 8 gigs were good for ryzen 5000 due to the increased bandwidth
no
7000 shouldnt matter
4x8 is better than 2x8 but not 2x16
as long as the 2x16 is dual rank, 4x8 offers nothing over it
i mean i guess 2x16 single rank exists 
twin 16's arent guaranteed to be twin rank
infact its hard to find out if they are I found out
single rank 16 is more common now
theoretically 4x8 is no longer guaranteed to be dual rank either
looks fine, you should prob skip the keyboard/mouse if there's an option to
Sooo
Yes?
i literally just responded to you
No but I mean in general
It's all good lol
yea it looks fine
💀
...i kinda need a keyboard tho lol
Buy one
you can get a better one
its better to buy a aftermarket one
No need to get the included one
generally included are low quality
Bet
i mean
It shouldn't take longer than the pc itself to come
how much do they charge you to include it
if it's free might as well yeah
I know the mouse is just an extra $3
at that price i guess you might as well just take it and upgrade if it sucks enough to justify upgrading
if not its a hold over till you get something better
I have a ancient HP keyboard I keep incase I need it
That CPU cooler I got...
Is that good or will it nearly burn the processor?
Cooler Master A71C CPU Air Cooler Anodized Black Aluminum + Copper Core 120mm ARGB Master Fan (For AMD CPU)
You see
If you need a 4th person, everything is fine with it
And that’s coming from someone VERY indecisive
...can I get a 5th person just to be sure?
💀
…time to make an alt 
Unless YOU ARE the alt 👀
Imma make 10 alts then
Something tells me all of you guys are alts 💀
Bet
It's good you don't gotta change much(im an alt)
We're just joking about the alts 
Oh its perfect! (alt btw)
Ight bet bet bet
the hyte is good
11 is fine now, you just have to neuter the data collection (which is easy)
if you really hate win11 so much just install win10 over it
same key works for either anyways
Was that the issue this entire time we Windows 11? Dang, I'll just hate it cuz everyone else hates it and it looks ugly
i think win10 is ugly now after getting used to customized 11
Idk how to downgrade
make a windows 10 install usb
Too much work I'm sticking with Win11
If you do install 10 over it then it won't be activated btw
wait huh
what
Honestly it looks to basic for me
Like....too simple
I have been using it since day one of official stable launch
Win10 or more complex
If it's activated with 11 and you install 10 you can't downgrade your key
bruh
💀 the way this sounds LOL
You can change the appearance easily
you WILL conform
10 looks even flatter
lmao well it sounds like what ms wants you to think, but it has happened to me
10 now looks old to me once i got onto 11 for long enough
ye
I'm still partial to 98 but I can just get a skin
I'm that one who finds xp to be boring af
I was born in xp era yes, but I don't like its looks
Never did 
Imagine
Win98
Ryzen 5
The power of playing that one game with the numbers I can't be bothered to remember the name of on 4k ultra HD
..my fav windows version is 11 despite its many shortcomings
second is 10, third 8.1
see i'd get people freaking out
Opinion rejected ❌
8.1 is unironically better optimized than 7 tho
way faster boot times with same device
every win 7 stuff works fine
Ah but you see windows 7 has windows 7 
you can also add classic shell to get win 7 style start menu
Yeah but no insert Win7 start up sound sound
can add that too
See now that's just called hacking
I had the 98 startup sound on my Lenovo PC
No it's called the sounds menu
💀
...oh yeah I forgot I did change one of my start ups before...
AND I CAN'T DO IT ANYMORE ON WIN11
Wish I could do that without using a program for it in win10
Sadge but I now have 11 to love
HMMMMMMMM
8 tried too much to be a tablet
8.1 nah, it's fine
Wait what's the difference between Win8 and 8.1?
8.1 lets you default to desktop mode instead of the stupid apps menu in tablet mode
8.1 did do a slew of changes tbh
And it was that time MS owned up to their mistake
Thank god they didn't push forward
Oml
Vista is another one that didn't deserve all the hate it got. If your hardware was made for Vista, it was fine. The people having trouble were using older hardware or upgrading XP.
They try to upgrade to vista on their 300mhz pentium pc

And complain about it not working
"Y my single core no worky?"
Now the number one question for me is, how do I transfer some of my data files from my laptop to this new PC without a USB stick?
I rather liked vista
Windows shares
De wha
And had more refined ui
fastest way is to pull the entire drive out of your laptop and put it in the pc lol
Right click the folder you want to share, click share. Follow the prompts.
Well yeah that too lol
No it won't let you for security reasons
Certain things are blocked like the Windows folder
What about multiple files at a time?
(this was not a joke)
Just take laptop drive out and do like sips said
Yeah motherboards come with sata cables still and the PSU will have sata power
Or if it's M.2 that works too
See I thought about that but the hard drive contains Windows 11 and I'm putting it inside a PC with Windows in it already....wont that mess things up?
no
Nope
it won't
just set it to boot to the desktop windows install
windows will ask you to choose
Yep set the desktop drive to a higher priority
Only if you put 2 on the same bootloader
hm okay then
So basically rip the hard drive out, slap it inside my new PC, turn it on, and hope it asks which drive to start windows on?
if it doesn't ask and boots to your laptop's windows install
you can go into bios and force it to go back to the desktop's windows install
You can tell the bios which drive to select, there's a button to press to open the boot menu
It's F11 on my MSI X570 board
Yeeeeaaaaah so....
Did somebody say Windows Share?
I think I heard Windows Share
I'ma use Windows Share 💀
Ok what you want is to right click and "give access to..."
....Ill see about this once I actually have the pc with me 💀
Also is it good for me to buy or should I change something on it?
Did we ever say there's something to change
You had basically everyone who knows a thing or two about pc tell you that it's a good buy
Jus messin 💀
Have everything plugged in and good to go just have the radiator fan not working
but so close now
Okay so I figured out my problem and had to replace a cable on the Lian Li fans that were on the radiator , I unscrewed the Fans on the radiator and I can no longer screw them back in. I've lined up the holes but I'm getting no grab on any of them.
What might I try/ do?
Pro tip for you:
You don't need all the screws. In your case you can get away with as few as 2 screws on the 3 fans because they hold each other up.
Get the ones you can, don't stress about the rest
Okay ill look for 1 bottom / 1 top that screws in but it just feels so odd that It not an easy screw in lol
Yeah that's one down side of the uni fan. You can't adjust them in case something doesn't fit perfectly.
or that they get stripped so easily or not even sur what the matter is here
Everything is up and running just need this last screw in and its off to the races
Hi guys i have been using a 12600k ddr4 build for 17 months with the igpu due to the gpu shortage/high prices now that prices are normal i was wondering what gpu to pair my cpu with i was wondering maybe a 6650xt and 6700xt considering the price i have a 650w psu so could u guys tell me if i should go with the 6650/6700xt if so could u reccomend a gpu that wont need more then a 650w psu
6650xt, 6700, and 6700xt are all fine options
And will be fine on that psu as long as it's C tier or higher per the tier list pinned in #cases-psu-and-cooling
6700xt any day of the week if you're gaming
Like a 30-35% difference
thx :)
yo helping another friend out with a build, looking to see if anyone got any tips to improve on the build, going for a budget £600 1080p gaming/streaming rig. doing smth like this after watching some yt vids for recommendations
https://uk.pcpartpicker.com/list/6NmWNc
any ways i could improve it? appreciate any help
Part List - Intel Core i3-12100F, Radeon RX 6650 XT, Deepcool MATREXX 40 3FS MicroATX Mini Tower
the psu is honestly crap
what would you recommend instead?
gimme a minute
I would do this
It's extra money but worth it for the safety of your parts
ye definitely, cheers
also, would the psu hold up fine if instead got like a second hand 6700xt off ebay or smth or would it need an upgrade?
you're welcome, feel free to ask if you got any questions
https://uk.pcpartpicker.com/list/3hcm6r
20£ more is worth it. Go up to kingston fury 32gb 3200 kit if they can stretch another 30£ on top
Part List - AMD Ryzen 5 5600, Radeon RX 6600 XT, Montech AIR 100 LITE MicroATX Mid Tower
yo thats pretty sick as well, ty man
Np
would the 6650xt here https://uk.pcpartpicker.com/product/NjM48d/asrock-radeon-rx-6650-xt-8-gb-challenger-d-oc-video-card-rx6650xt-cld-8go not be worth it for like £5 more than the 6600xt?
Exploding kitens
Kittens
Yes. Kitens
"Born from a fusion between a kite and a small cat, this flying, small monstrosity is believed to have been one of Dr. Frankenstein's early experiments."
Hello may I ask if there’s case similar to the dell precision 36x0s?
34cm in height
okay question for normal gaming and vr rtx 3080 second hand around 600 euros or rx 6950xt and i do wanna last some time with it
i dont care for dlss or raytracing btw
Why for?
The size of the case fits well on my desk
Ah gotcha
What game(s) do u play?
every single genre out there
but rn mostly rpgs, action and stragety games
6950xt!
and even for vr its good?
15% faster and 6gb vram more
Just look at micro ATX cases
Okay haha
That’s the “mini tower” types there are so many
yeahh true
My friend is building his computer
For the first time
He’s getting
Red light and orange light motherboard
Components are
I7 13700k
4090
1200 PSU
Asus Z 690 A
DDR5 RAM G,SKILLs
Everything and the RBG gets light on
Personally believe the problem is
Either the CPU or the ram
is that a good pc
i have a 600 watt psu from a prebuilt from 5 years ago, should i get a new one for thsi pc or nah
I would
might be bios too old for 13th gen
But he mentioned it to them
if the board has flashback try updating it first
When buying the components and I told him to make sure
maybe they forgot
About it
surely asus put a flashback button on their $6049372820 board right
try it anyways
No that is an awful pc
For $1250 you can do a full 6950xt build
Part List - Intel Core i5-13400F, Radeon RX 6950 XT, Phanteks Eclipse G360A ATX Mid Tower
Far, far better
Im helping my friend build his pc, everything is built but when we boot its just a black screen with a dash line on the top right, we try to open bios , it doesnt open. But he has so ssd, would that be the problem?
Yeah if there's no boot drive it'll either give an error or just blink that cursor at you
Try hitting delete repeatedly as soon as you see the keyboard turn on and see if it gets to bios
As in the actual backspace delete button or the Del button
The delete button
If it's a DDR5 system it might take a few minutes to train the memory, especially AMD
What motherboard and CPU is it?
B450M-A pro Max & amd ryzen 3 4100
There's a good chance that board needs to be updated to support that CPU
The board came out in 2019 but the CPU 2022
What % would a “good chance” be
Can u find me a good average board that will support this cpu
Did you buy the board new or used?
he bought it new off newegg
So should i tell him to try to request a refund off newegg?
Ok definitely will need an update. The cheaper option is going to be buying an older model CPU to update bios with instead of buying a new board.
An example
~~ https://www.ebay.com/itm/255232329681 ~~ No don't get this one, not on compatibility list
And the other option?
Since the board is open now you can get it refunded and buy another but there will be a restock fee, assuming the seller takes refunds at all for open items.
That would take longer too
What do you think would be the smarter option
All he wants is to be able fiveM
What if he was to put his old cpu back in
It has
His old cpu is AMD Athlon 3000G Upgrade to AMD Ryzen 3 3250U
Whtvr that means
@potent portal
Great. If you pop that one back in and update the bios then the 4100 should work.
Then the dash will disappear and then bios will open?
Most likely yes
Okay I appreciate it boss
Here's the latest bios for that board from last month https://download.msi.com/bos_exe/mb/7C52v3H.zip
yo can sum one make me a list for around 1300 and will ship to canada
question
I'm still on this black screen with a white dash, I was told that it's because my motherboard is made in 2019 and my cpu is one that was made in 2022 what if I download a bios update that came out in 2019 and put the flash drive into the pc, will that fix the issue?
what cpu and motherboard?
What’s a CPU OPT Fan connector(s) ?
just a normal fan header, sometimes on the cpu fan curve in bios
its purpose is for like times where you have a cpu cooler that needs two separate fans or stuff like that
ah ok thx
any time a video playes my screen turns black and my screens colors change. anyone know how to fix? (dm me to see a video because it wont let me send it here)
Download the file from the link I gave you, extract it to a FAT32 USB drive, put the old CPU in, go into BIOS and update, then put the new CPU in.
Would update bios help with unstable memory before I updated I was crashing in a game of valorant every couple rounds. Now after I updated I didn't crash at all
it definitely can
The file size exceeds the allowed limit.
CorrelationId: c02bbe72-b461-406d-8b30-5c41ada60197,
UTC DateTime: 05/05/2023 18:06:57
anyone seen this before I unzip a folder and this happens to the files
What happenes when plugging rgb fans n coolers to a board with no rgb?
they’ll work fine with the rgb off
but if you want to be able to use the rgb you’ll need a controller of some sort
some cases come with built in controllers (if you need recommendations lmk)
Sounds like a corrupted zip or bad download
I literally didn't have enough storage lol thays what it was
https://www.newegg.com/asrock-radeon-rx-6600-xt-rx6600xt-pgd-8g/p/N82E16814930064?Item=N82E16814930064 hey guys is this 6600xt variant good ? im planning on getting this
Not a bad price, I believe there's a 6650xt for $5 more
3 fans is also more than enough
Yeah there is one for $259
https://pcpartpicker.com/product/NjM48d/asrock-radeon-rx-6650-xt-8-gb-challenger-d-oc-video-card-rx6650xt-cld-8go
@urban frigate ^^^
Is it fine if I test a gpu that I know might not work and maybe smoke
What
You’re gonna test the gpu that may not work and smoke while you do?
Or the gpu is smoking?
It’s a old 6700xt that my cat puked on
And I cleaned it
Today
And i don’t know if it will hurt any of my other components
It shouldn't hurt anything else assuming it's dried off
Alright
looks to be a good build, so yeah, it's good
At that price range you could consider a nicer SSD but the mp33 is pretty good already
Thanks!
it's fine really, looks like a gaming build
YOUR CAT PUKED ON A 6700XT WTF
LMAO
What’s the best keyboard to buy
That depends. How much do you want to spend? Do you want it prebuilt or do you want to build it? I'm assuming this is for gaming?
Prob buying the best keys, frame and some other stuff then pay some professional to build it
Valorant. I don’t want to build it and I want it to look clean. 60-65 percent
Idk what to get Keychron or wooting
when i was asleep trust me she has not been on top of the pc in a while
I was thinking about buying a resolder kit because most of the solder points are damaged
why does my pc always turn on in the middle of the night
Could be a couple things. Wake on LAN might be triggered or some other bios level wake event, or when you shut it off it does the stupid hybrid sleep mode and gets an OS level wake up.
A quick way to tell is to check your uptime in task manager. You can try to prevent it by holding shift while you clock shutdown so it doesn't do any kind of sleep.
Hey guys i was planning on getting a 6600xt but will a 6750xt work with my 650w 80+ bronze psu i googled it and it said it will work but do i need to undervolt the gpu to be safe or is it good to go
Wooting is pretty good. I'd recommend it if you're going to use the analog part. Do note getting the Flaretech stuff (EOL, can only get them used) isn't the most recommended as they kinda suck for the analog part.
anybody know of the smallest standardized form factors that have at least PCIe x8 and intel 3rd gen or newer support?
(ping me plz)
Hello anyone know if the Noctua NH-D15 Item#: 9SIAN0MCH39055 they sell on the website is updated and includes the mounts for am5 platform
Planning on getting a ryzen 9 7950x to run some vms and a mail server
anyone purchase this cooler recently?
i mean its a D15
NH-D15 would be fine
hard to go wrong with something like that
it is on par with AiOs
just not sure if it comes with mount or if i have to buy from noctua
they sent me here xd
ohh newegg did
if its not on the newegg listing, dont count on it
yeab
its strange
the processor is listed in teh discription however its not listed in supported sockets xd
getting mixed vibes xd
AMD Ryzen 9 7950X - 16-Core 4.5 GHz - Socket AM5 - 170W Desktop Processor (100-100000514WOF) and ASRock B650E STEEL LEGEND combo
so its am5 socket board
want to say it looks like 4 hole mount https://c1.neweggimages.com/ProductImageCompressAll1280/13-162-081-08.jpg
loo
am5 boards should be compatible with am4 coolers
should
if they use the stock backplate
ill give it a try if i have issues ill post back here worst case i just have to order mount from noctua :]
pretty sure it should be fine
first time buying into amd platform since my fx 8350
been using 9900k since i originally upgraded but dont have enough cores for the vms xd
@crude geyser Forgot to tag you for this reply.
Yo so
I have an nzxt h510 elite case
And the side panel got shattered
How can I replace it
Contact nzxt support
https://support.nzxt.com/hc/en-us/articles/204736354-Exchange-or-Replacement-Part-
To receive warranty service on your product, you must submit a request to our support team to address the problem. For minor defects on the case that are easily replaceable such as a defective fan,...
Noctua sends you that for free, no need to order it. There's a very good chance it'll have the new bracket anyway.
thank you first time purchasing noctua product xd
They'll stand by it for life, that's really the biggest advantage of Noctua. You buying this cooler now means when a new socket comes in 12 years it'll still be supported.
thats really nice
ive always gone liquid cooled but i figure where reliabiltiy is a thing prob not want to rely on a pump not failing xd
holy they have ram thats that low latency OWO
liquid coolers lasts like 3 years
*cheap ones
The fans usually die long before the pump, unless you're just unlucky
on my very first computer
that was 12 years ago at this point
ironicly the fans still work lmao
I had issue with pomps 2 times and in both case RMA fixed it
cant remember first one
120mm rad was like 54 bucks at the time
second one was a arctic cool one
3 years?! are you bottom mounting them or something
that would epplain things if you did xd
3 years is an abnormally short pump lifespan
tbh shouldnt it last longer then that even if it res was mounted at bottom?
And they would send me another one ?
https://pcpartpicker.com/list/k9PWNc any decent fan suggestion for this build ?
Part List - AMD Ryzen 9 7900X, GeForce RTX 4090, Asus TUF Gaming GT502 ATX Mid Tower
I meant cheap ones lol
like coolermaster etc lol
maybe it's just me had issues with coolermaster but idk
and is there any piont to go for 1200w instead ? 
i mean theres the part about after 10 years of use itll only be able to produce 50% of its rated power
If it came broken, they'll send you a new one, if you broke it, they can send you a new one if you pay for the panel
so itll produce 600 ish watts at that point?
Myth
It doesn't lose 5% per year, it loses maybe 1% per year but usually less. Unless it's a SUPER cheap unit that uses liquid caps or something.
(assuming you're talking about a power supply, it seemed logical to me)
Unless you're doing dual GPU time spy records or mining no one needs 1200W. And you don't need that unit when the RM1000x is under $190.
You can get the 12VHPWR cable at best buy for $20
I already have few of those fsp psus 
Well as long as you're not buying it
Probably a noob question, but is it possible to have a dual PC with two different processors? My main is Intel but I was thinking of doing a mini itx AMD in the future.
Yeah they have cases that allow for dual motherboards
Nice! And I do have such case for it ^^ just wonder if it's possible 🙂
Sure, you don't need the same brand for both boards
Thank you ☺️
Part List - Intel Core i7-4770, Radeon HD 5770, NZXT H210 Mini ITX Tower
i made this budget pc
already got all the parts spent around 66 on the total and im selling it for 200
monday
could i get more or is that a fiar price
The price should be like maybe 150-200 but the only person who’d buy it is just someone who wants to browse the web
Just throw an ssd and better gpu in there?
Granted for that price it wouldn't make sense
^
You could but you might as well get a laptop for under 200 or if your upgrading and spending an extra 100-200bucks u should just get a console instead
Ik that pc is more versatile then a console but there is no upgrade path for old hardware
https://pcpartpicker.com/list/P8PT6r
Lil pc I built with parts I had (didn't add ram cause they don't have what I'm using)
Part List - Intel Core i7-4770K, GeForce GTX 1070 Ti, Cooler Master MasterBox NR600 (w/o ODD) ATX Mid Tower
Yea lol the mobo I bought came with that cpu for free
Was supposed to use the 4670k I have but geuss I got lucky
Still if u upgrade from the other parts list that’s being sold that’s an additional 100-130 bucks going off your parts list for prices
Around the same as a series s cost, I’d personally sell it for maybe 120-160 maybe so u can make some profit
i told him to get a ssd and recommended a new gpu im pretty sure its for his son mostly plays roblox and minecraft
Man SATA SSDs are like half the price they used to be lol
got the hdd dirt cheap
I really want to get a 2TB like MX500 or 870 Evo tbh
My biggest SSD is 500GB and it's in a computer 700 miles away from me
That makes more sense now lol
and the mobo im pretty sure was high end during the time
Prob was since it’s running an i7
even has a m.2 on the back
i dont have io sheild
but also the psu that was sent with it broke so i put a 650 watt segotep fully modular in there
case has pretty good cable managment for how small it it
is
Apparently my z87 ud5 was 250 msrp
That thing is so baller
Has features my strix b550f doesn't
Neither do I lol
U forgot to put it in lol?
Kinda handy how most boards have them pre installed on the board now
How this thing was shipped to me
same with mine
No io shield = more airflow 
it's lucky nothing broke on it 
U could maybe upgrade it to a 1070 ti then charge a little extra
They go for like 50-90 on eBay
nah
LMAO
It's fineee
i already selling it monday and dont wanna wait longer
i have a diffrent pc i wanna buid and i might put one it
in it
Lmao I thought it was noodles for a sec
LOL
Lmao no but it left my room a mess
im going to see if i can resolder my 6700xt and it work again
Mmmm ramen motherboard
Ikr
is this repairable?
?
The one the cat puked on?
it's likely repairable
The solder
but it will require lots of work anyway
Looks terrible
Give the PCB an alcohol bath first
Ok
This is where you really want 90%+
^
I did 90
A bath means letting the pcb submerge in the alcohol pool
The mixture won't kill anything
If u do it right probably
Ok, then what you can try is the oven trick to reflow some of that solder
And makes the surface clean to work on
Did that
It’s just completely gone on some of the pcs
Pcb
I really hope you used an oven you'll never use for food again
Well
...
Ummm
oops
Wait what happens if u a food oven?
I have done it like twice
Well there goes your food
Poison happens
I’m finna grow a tail fr
Your food will be cotaminated
Nope it's not just on the walls
Highly recommend tossing, those things are like $40
I wouldn't want those gpu materials getting on my food
The solder could contain lead, you can get actual lead poisoning
Your oven is prob a safety hazard to be around
probably but nothing bad has happened bad "yet"
Noting bad you can see that is
Lead poisoning often has no noticeable side effects
Until it gets really bad
Leads to brain damage I think
Yep
Well some of us alr have that (me)
Yay for the paint chip eaters running the country now btw
Toys used to be made with lead paint and kids would like lick them and stuff
But that was a long time ago
Brain damage, just like some people around here
I won't say who cuz we already know 
I like eating crayons the pink ones are my favorite
Anyway, well if solder is missing
thas what i said loll
Put on some new solder
Yea reviving a 6700xt is not worth the health consequences lol
Its always worth it
YOLO moment
that looks corroded as heck
Picture kinda weird but it’s alright
me
broken for $100
I’m not 18
who gives a 💩
You need to be 18 to sell
That’s even worse ruining your health for a 6700 xt lol
Ebay does actually verify your age through paypal
Same
you dont (need) to be
use your parents
like me
But what if you're Bruce Wayne
hey thats how much someone offered for my working gaming x 6700xt
Parents got me a 3090 for “zoom” jk
oh cant forget the cigars another guy offered
$100 for working 6700xt is mega lowball
use moms card to buy 4090
someone prob just trying their luck
LMAO fr
okay but can I rma my dad?
Something on the case got the bracket stuck and I didn't know I laid the gpu bracket on the mobo
Scratched it deep
I can see the wires inside lmao
Those lowballers will always try some tactic to get you to agree too. "It's for my son's birthday! This is all I have! YOU ruined his birthday he's crying now!"
That sucks @obsidian wigeon
f yo kids get yo money up
I did the samething with my 3090 but I only scratched the paint on my pci lock, my asus board pci lock kept on locking
reselling pcs is such a w
Asus gave new mobo, no questions asked
Damn
It took 3 tries to get MSI to replace my board. It stopped running memory at any speed faster than 3400 and refused to load XMP profiles.
But actually bringing it over to a service center is an instant accept
lmao
Asus is confusing sometimes
I eventually got a X570 with wifi out of the deal at least for my basic X470
Doesn’t EVGA have like the best tech warranty
Since a technician broke a piece of the case off, but gave me new front panel because of it
RIP EVGA
Had to wait a week however, took time to ship from china
i turned my pc on and off multiple times when it happened
i didnt know it got in the gpu
What happened to them, I haven’t been into tech stuff for like 2 years
They got fed up with Nvidiots BS and quit making GPUs
Oh I thought they were going bankrupt or something
People are hoping they make radeon or arc gpus
Nah I doubt they will make gpus soon
Very much alive anywhere else tho
They’ll prob wait until the cards don’t need heat sinks the size of bricks to cool them
what do yall think the probability is me reviving this gpu
0%
i also never used a solder iorn before
Not worth it
oh boy
Negative percentages
start on bigger stuff
w
my grandpa tought me to solder at 10 lol
i have watched videos thoi
EVGA just hates nvidia being impulsive with pricing
Was he a welder?
had to be ready
yuh and electrician
No one ever knows the true price until launch date for gpus
Either taking aibs by surprise in a pleasant or painful way
The issue was Nvidia was charging $550 for a GPU core on a GPU with a MSRP of $600, making it literally impossible to compete with Nvidia. No one else can make money at the FE price.
One of my other friends grandpas is also a welder lol
im going to say i got 5 percent of fixing this
10% you fix 30% it explodes

60% nothing happens
not bad odds
How’d u knock off that many capacitors or whatever there called in the first place?
who
U
wdym
explosion i guess
cat puke
in pc
when i turned it on
or in gpu
i spent 467 dollars on it to
gpu prices were still high tho
It's possible it could work again if it shorted and corroded but if it killed something when it shorted you'll need to isolate the short before it'll work again
So the pc was turned on with cat puke?
That’s nice
im lucky but unlucky
i remember the night to my dad said the cat is puking on your computer but i was to tired to get uo
Well good luck with that 6700 xt if u decide to solder
ip and get her off
Lmao
it was like 4 or 5 in the morning
bruhhh
This story is the first time I’ve ever heard of puke in a pc
Hopefully no power stages died
Idk what there called but aren’t u suppose to use something with two probes to check for electric signals
Just ran star citizen for the first time and honestly I feel slightly concerned that it was running 80% cpu / 80% gpu on medium settings
i tried to turn it on today and no power to it
A multimeter?
Yea
i dont know how to use that tho
There's Roman (Der8auer, the German) and there's Buildzoid (Actually Hardcore Overclocking)
Buildzoid has done more repair videos
i should send it to him and see if he can repair lol
You can ask, no guarantees
He's done so many at this point he's mostly picking out more interesting cases
mine is
Why repair it when u already have a 6800
Because it's still a really good gpu?
Why just waste it
and even if i had to pay 100 dollars to fix it
100 dollar rx 6700xt
not really but
you get what i mean
Tweet at BZ on twitter with pics and the story and see what he says
@Buildzoid1
alright
Well if it’s just going to lay around after being repaired I don’t see any point
its not
U could oc for fun ig but that’ll only like an hr
could give it to a freind with a rx 570
Ooo
Yes compete with my card🗿
rx 570 the goat budget card
or used to bne
be
had mine for atleast 2 years
before i gave to a freind with the hd 5770
thats in the pc im selling
U could try a local pc shop
There might be a chance someone could solder it for u
tried
they told me no
because they wouldn't attempt because they only do it for smaller things
like phone
or something like that
Ig u could try soldering it if u can’t find any help
i am tomorrow
But you’ll need figure out what’s wrong with it first
im going in blindfolded
Goodluck
I got a question real quick....how can I tell if my company is flowing?
Can someone tell if this list good I have this guy build it and I just making sure it be able to stream and game https://pcpartpicker.com/list/h94VMb
Part List - Intel Core i5-13600K, Radeon RX 6750 XT, Phanteks Eclipse G360A ATX Mid Tower
it could stream and game well, tho the part selection is questionable
ssd could be cheaper
Well if you are able to see the cash flow in and out it's pretty easy to see if the company is flowing
You can do so much better for 1450
https://pcpartpicker.com/list/jgX7mr
Part List - Intel Core i5-13600KF, Radeon RX 6950 XT, Phanteks Eclipse G360A ATX Mid Tower
Or if you wanted a 2tb you could just do this and spend another 30$ over original budget
https://pcpartpicker.com/list/B32DGL
Part List - Intel Core i5-13600KF, Radeon RX 6950 XT, Phanteks Eclipse G360A ATX Mid Tower
@fossil cedar thanks
Meant to say coolant. But autocorrect failed
Ah. Touch the tubes. One should be warm, one cool.
You'll also feel a slight vibration from the fluid.
Company flowing is great and all, but it's really nice to have company that sticks around with you through it all 
I am approving this
Fishlix approved
hello
If the my laptop was hacked and I did the reset and he is download Windows auto , is it clean?
English pls
If the my -_-
@potent portal
My w soldering
I used flux
So don’t worry
Places where I soldered
Does it work again
Idk haven’t checked
I’m about to eat
Then check
Does the solder job look fine for 1st time
Publix sub so good bro
is that the cat puke gpu
Ye
the cat puke corroded solder joints?
Ye is there anywhere else on the board you would think I need to
I don't know anything about board level repair lol
Well guess kinda
see if you can find a detailed pcb shot and compare maybe
Yea or same pcb
Ok so it doesn’t turn on but
If it’s not plugged in it showes red lights when not plugged in I don’t think it did that before
And my dad got me a multimeter
plug in the pcie power lol
those red lights mean no pcie power cable detected
them being on is a good sign
I did
It depends on how they got in. PC reset leaves a lot of files behind so if it was a virus it might still be there. If it was a more simple scammer connecting remotely, then it's probably ok.
How do I use multimeter
There's lots of ways to use one, that's the "multi" part of the meter
Ok
Let me grab a video so you can get an idea of what to probe
My Patreon: https://www.patreon.com/buildzoid
Teespring: https://teespring.com/stores/actually-hardcore-overclocking
The Twitch:https://www.twitch.tv/buildzoid
The Facebook: https://www.facebook.com/actuallyhardcoreoverclocking
#GPU #repair
You'll also want to make sure your probes are in the right slots. You want the ground and one with the Omega symbol.
Yo I think I found the problem
How do I know if it’s putting out the right volte
Voltage can only be measured while it's on
Well the right output with the multimeter
Or reading
Like if it’s supposed to be that number#
Touch the black probe to ground and touch the parts you think are damaged and surrounding parts. If you get 0 ohms resistance, it's either ground or shorted.
Define not a number
It's 0 then, it just took an instant to overcome the resistance of the material
I just needed to move it to a certain spot
Nothing has just been 0 yet
What are you using as a ground point? I usually do the metal around the HDMI connector
That's good then, it means no shorts so far
Which also means the components you've checked are probably not dead
Where? A single short can be devastating
