#general-chat
1 messages · Page 806 of 1
Can anyone tell me how much this laptop went for when it was new? It's out of stock everywhere I've looked so far so I'm guessing it's fairly old at this point.
https://www.newegg.com/samsung-notebook-odyssey-15-6-geforce-gtx-1050-intel-core-i7-7700hq-fhd-16gb-memory-256-gb-ssd-1tb-hdd/p/N82E16834132142
7700hq... 1050... Yeah that is ancient
Yeah, I was assuming it was pretty old. I was trying to look up some specs and pricing on it. Found the specs but no pricing.
1050 is like 4 generations behind
$1100-1200 according to this review
https://www.notebookcheck.net/Samsung-Odyssey-NP800G5M-7700HQ-FHD-GTX-1050-Laptop-Review.213840.0.html
Oh I know. Just wasn't sure time-wise, how far back that was.
And out of support pretty sure
a 1050 laptop was over 1k?
Ehhhh I was close
New yeah
even then thats wild to think about
i see
i wonder if this would work https://www.digikey.com/en/products/detail/murata-electronics/NFM15CC223C1C3D/4906082
Thanks! Just was curious.
As long as the specs are right
Or close
They are just filter caps
i have no clue what the official specs are, but the ones stated seem reasonable for the use case at least
yeah
All the timing and stuff is internal
aveage net
oh
\
oh
@rancid juniper should i use process lasso? or nah
cause speed
Sponsor: Antec Flux Pro case on Amazon https://geni.us/CaPv
In this video, we crawl through over 450 listings of GPUs from AMD, NVIDIA, and Intel. The one finding that jumps-out more than anything else is that the most available cards at the closest prices to MSRP are 8GB models, particularly when higher capacity models of the "same" GPU exist. ...
based?
Not like that you blabbering weirdo

That is higher than the fastest Xfinity plan
i ask people in the homelab discord for recomendations right
i get a bunch over overkill recomedations i dont need .-l.
sir i just want a route that can handel 2.5gig.. im not building my own routre with 10gig
2.5g isn’t too hard to find
Ubiquiti has a small router with 2.5g wan and lan for around 200usd to get an idea
yeah i know, its just annoying when u ask for advice and they go to 2.5gig useless 10gig cheaper in long run like i Need 10gig
i legit only use 2.5gig on my pc
Well they aren’t entirely wrong. For some hardware 10gig is actually pretty cheap now, also easier to find than 2.5g
Of course, but I don’t need it unless it is cheaper right now, I just want to plugin router to modem, and router to pc
Everything els idc i use work
i forgot, i cant even use 10gig on my pc
i only have 2.5
"Stop Killing Games" got past 1,000,000 EU signatures
& past 100,000 in Great Britain
There's a goldmine of cheap surplus business class storage out there, and Prospector Wendell is gonna show you the way to it! Yeehaw!
https://pixel.serverpartdeals.com/Level1SAS
https://www.youtube.com/@Level1LinksWithFriends
Go Subscribe to our New Links with Friends Channel!
Starting in July, we're going to post links with friends on its own...
daaayum 8TB HDD for $90. I wonder how beat down it is lol https://serverpartdeals.com/collections/hard-drives/products/wd-hgst-ultrastar-dc-hc510-huh721008al5204-0f27376-8tb-7-2k-rpm-sas-12gb-s-512e-3-5-refurbished-hdd
10TB $99
does that mean its not shipping at all?
I kinda want to get a small vacuum or something to clean the inside of my computer. Does anyone have any recommendations?
you would want a blower
vacuums create static so it's not really a good idea
look for air dusters on aliexpress or amazon
Thanks for that advice. I was thinking of getting these tiny hand vacuums that they sell at my work, but I’ll think of something else instead.

my computer is gonna drive me crazy

but is it available for US? it was japan exclusive was it not?
Why would anyone want a ring watch
No clue
why wouldnt you want one 🗿
Got em
Just get a normal watch, or look at your phone
damn, it is available for the US. it was japan exclusive when i first found out about the ring watch
I didn't want one i js thought it was funny
some watches are uncomfortable for to me but not rings
would also be funny if someone asks you for the time and you look at your ring instead of watch or phone
Now we need a ring that fits your entire wrist, and not just a bracelet
HELLO
HELLO
What if I did
honestly "just look at your phone" is the worst advice
looking at a phone is way less convenient than a quick glance at a wristwatch
the ring watch is more of a novelty/statement piece
I used various grit sandpaper, a nail buffer, & Fitz Polish
but still pretty cool
make it shine more until its hd
I don't think I can tbh
1080p reflection
I've been rubbing this thing with three different nail buffers over the course of today lol
try 3 more new ones tomrrow 
I only have 2 unused ones left
for the record, I've only used them for crap like this. I do not buff my nails lol
I have used the other side to like even out ridges tho. I'll admit that
buffing your nails is crazy it's like clear nail polish on them or something
at first I was just trying to get off all the old liquid metal to try this new one
then things began spiraling
100GB is small, why are people complaining
some peope lack storage
Myself personally I got 6TB SSD and 4TB HDD so 10 TB of space total.
many have only 500-2TB of space for some reason.
buy more
like this
is SAS the interface? I dunno server parts
@dense locust slime girl
lol TitanRig wants to charge me more wth
Spends $3000+ and still needs to pay $200 more
special edition is cheaper
because they actually just drill through acrylic

headless GPU
tbh I'd get the not special edition one
that way you can connect on the front or the back instead of just the front
yeah
performance-pcs is slacking with 5090 blocks
& Optimus website doesn't even mention 5090
that's kinda strange tbh
ikr
usually if they only make one block it's for like FE
especially when they did strix/tuf very well

at one point KingPin was supposed to collaborate with PNY on a KP 5090 or something of that nature but ig it fell through
for CPU, I really like ThermalGrizzly's blocks
but I'd hesitate to get one after that piece of trash direct die thing EK & der8aur collaborated on
I've had that trash sitting in a drawer for over a year now
you don't have to https://www.thermal-grizzly.com/en/products/delidded-cpus/

expensive + sort of vendor lock in on the frame
lol ig to make you buy their Mycro thing
they said mine wasn't compatible with my CPU but dremel showed them
It was probably made before the vcache chip
delidding is not worth it if you have any kind of budget and are not doing extreme OC
i have really low ping, really high fps, but i rubberband frequently in games and its a brand new router and internet service 2 days ago, any possible fix?
sounds like packet loss
bufferflaot shouldnt be that bad unless somebody is downloading
beautiful
think i finally have everything about this card dialed in
fingers crossed
dropped from path tracing down to psycho RT for UV stability testing since there's still that driver issue with path tracing
can barely tell a difference anyway
Yes
The one that sells canned fruit
And spaghetti sauce
And canned beans
And soup stocks
How sre they bankrupt?
They are needed for some dishes
Hehe did they get canceled or something
Bank
Is that all the tabs or are there more
Imagine a CPU with a 5090 built in. Probably be like LGA 10,000 or something lol
Novalake Next socket be like
Hear me out
solder gddr6 to a motherboard, socketed cpu with a good Apu like the 8060s or similar, then you just socket normal ram and boom, no more gpu needed
you can buy PS5 APUs (GDDR6 memory) but they suck a ton
idk if it's bc they're stripped out cores and windows/linux wants some of the stuff they don't have, or if it really is GDDR6 latency pulverizing performance
happy 4th 🧨
I have my priorities STRAIGHT
Not the cyberdump
No normal person is thinking like that
if a website makes you feel threatened you have bigger problems
Does anyone know if newegg is still shipping to canada?
What lol
Oof
Bro I’m pissed because the airplanes are freezing & I had to buy a $65 jacket since I didn’t think to pack one because summer
Spirit got them planes turned down to like 40F
can't have shid in detroit
People always talk about game plans but never about planning games. Sad
Games no fun smh
I work today 
Im ready for prime day 🫡
More
Debt
GIVE
Hmmmm
That aint gonna get a 9950x3d
buy me smth nice bbg
what in the
They overproduced during COVID, their debt servicing doubled in expense since COVID and half of the canned fruits and veggies market is buying store brands because everything is expensive as heck
HONESTLY WTF
and the final nail in the coffin (or rather just a factor that didn't help) was the tariffs
Hot take: "I recently got a new phone" is worse than "my printer is having issues"
only because almost nobody uses printers nowadays and phones are getting too smart dumb
I feel like my fm7 cars are gonna die now
gonna be sent to the junkyard
nooooooooooooooooooooooooooooooooooooo
smartphones are getting too many "ui overhauls" that change gestures and settings and shit and even i got confused about samsung's new ui nav
I'm talking about MFA. It's the "I got a new phone and now I can't sign in because of 2FA." Honestly my least favorite thing to hear in IT
Don't trade in your phone ffs. It's the worst thing I have to deal with
Nothing frustrates me more tbh
ok forgetting about moving your 2fa stuff is also an issue lmao
my friend lost his discord account because of this
💀
this was like 3 years ago though
It's the most important thing to backup and people forget about it
discord support said they couldn't help
The worst part is when people get a new phone number along with a new phone
It's always the phone leasing people I swear
Just save up for the phone and own it
lmao
"But phones are expensive" idc. I don't make much but that’s what I would do
And it's always somebody who makes more than me with this issue, so saying that makes the statement invalid
...people lease phones?
yeah
they've been doing it for like decades
a fair bit of contract phones don't have you keep the phone at the end of the contract
Literally just switch carriers, get a trade in deal and pay the $10-15 a month for a new phone
By the time youre switching phones, there's usually a deal going on at a different carrier for a couple hundred dollar trade in no matter what
they even did this with landlines basically
though it was more usually like a rental
though most people don't use landline anymore so now it's all just basically hidden price gouging of smartphones now
I debated on getting that but I didnt see much uplift in benchmarks. Might save it towards next gpu
I work for AT&T. While it can be beneficial to do installment plan. I still buy my phones outright and just trade in directly to the manufacturer
true tbf
big upgrade for me loll
yeah i just buy the used last gen phones
i got my s24 fe for 300 bnib
I got my s20 for free
I spent 550 on this S22 back when it was the most recent model. I will be buying a gen or two older now because there isn't a point in buying the newest model anymore
Went from the funni bomb Galaxy to the S22
I’m waiting till the 16 pro gets cheaper
That’s what I’m upgrading from my 11 pro to
The audio rattles and cracks sometimes now on the S22 and you can fix it by removing the sim tray 
Dumbest issue and solution I've had with a phone
It isn't like you have to get rid of the tray either. Just take it out and put it back in
will u have 175 any time soon?
Unfortunately no
I will in like 3 weeks
But this guy has 3 others interested
@rancid juniper rate my ddr5-6386 with 2196.99 fclk
achievement unlocked: How did we get here?
zentimings always looks so silly with bclk oc lol
trying to see if I can push pbo a little further
this is 103 bclk
as close as i can get to 2200 fclk
Seems tight
Too real
103.1875 bclk is not posting
guess 103.125 is the limit lol
103.1875 is where fclk exceeds 2200 so I guess I'm not surprised
I'm not getting great results from bclk though, might try static oc
i stand corrected
it was stuck on dram led so i powered it off, then went to see if i could get into bios without cmos clear but it just booted
what is this number bro? 😭
yall going ultra specific
I can't fathom dram overclocking on ryzen and that is something I will avoid in the future lmfao
But I wish you luck on making the tightest fast kit possible on your build
curious on the power draw for 5.6ghz
lol my nvmes started acting up I think I'm not gonna bclk
it was weird
cores 1-7 got faster effective clock but core 0 got slower
was worth a try for fun
knew it was cooked when the pc started booting into linux by default instead of windows
windows boot drive has left the chat

i've been cutting back on ordering takeout, but it always makes me laugh when they send like three or four sets of plasticware. bc no actually i'm just the skinniest fat ass to live and i'm eating all of this for lunch
Normally they give you the amount of cutlery as the amount of portions you order
@blackhole
Macos is weeeeeiiiiird
it is but i guess its just something you have to get used to
pretty optimized though
lol I'm not convinced this would actually do anything https://www.amazon.com/dp/B0F8R9M9SR?th=1
I thought they separated that?
my stupid BCLK doesn't even raise memory frequency
not sure it even works
Also, remember all that USB cutout nonsense that Ryzen 5xxx did? Supposedly that LCLK thing in AMD Overclocking helps with that. I'm not entirely sure what to set it to so I just set it to 2500mhz which is the maximum. I was having a bunch of annoying problems with my Wi-Fi adapter until I increased LCLK
maybe you have an eclk board
i can never find a straight answer but my intuition is that on more recent architectures it is separated. at least the satas and stuff are, but since NVME is just PCIE, and afaik BCLK affects PCIE still, NVME might get quirky. but i have no idea lol
I don't
oh I don't even know tbh
either way, my windows boot drive gave up at 103.1875 so I don't think it's separated on my board lol
tragic
pc booted into linux automatically
I just ordered a new toy
13600K borked
I'm gonna try to solder it back on dammit
well once I get a new one lol
don't think I can just fit a loose 120mm in this case and I don't like the flimsy feeling of the coolers that clip onto the dimm slots so this is interesting
damn that's pretty fancy looking
screwing into the motherboard is a really good idea
Apex comes with a fan that does that
gonna try to run it without the cage tho cause I don't like how the cage looks
my ram hits sometimes hits 49C when gaming which is kinda borderline for 65535 tREFI I think
if it even shaves off like 2-3C consistently it's worth the $20
it's not very impressive tho
Yummy
I wonder if you can just get the bracket & put one of those little noctua fans or something
lol this thing to mount it from top rad or fans https://www.amazon.com/Nuhikap-Radiator-Drainage-Reservoir-Heatsink/dp/B0D5B8BLPJ?
new CPU then repair old one?
not just repair and keep?
ohhhh i'm stupid lol
with my old people eyes
what waking up a 4am does to a mf
fr
i'm almost legally blind in one eye lol
my other one is tbh fine close up
damn look at the RAM fan that comes on Apex Encore
my right eye sucks fr
left eye for me
right eye is goated. not really, it just sucks way less
it still sucks tho 
the tragic thing is i look way better without glasses, but i can't stand contacts. so outside of work i just walk around half blind
ooh maybe this
I do have extra white fans lying around
that's got nothing on ye olden zip tied 92mm strapped on top
a bracket that mounts to the top is probably the only way I'm gonna elegantly fit a 120mm in here
probably gonna have to flip the radiator
I wonder if it comes with those long standoff things
zipties>>>
any small L bracket would probably be fine to mimic ASUS's thing
don't hide your words, you speak truth
zipties are simply superior to any other form of mounting unless they truly will not work
trust me
in my last build I had an internal monitor hooked up through a gaping hole in the back of the case
they are the platonic archetype of mounting
so I used an elaborate ziptie arrangement to mount a lian li arrangement suspended within that gaping hole in the back of the case
and it was sturdy enough that I could actually press the buttons on it
why do sodimm ram modules have such high timings?
based and zippilled
like I had chains of zipties holding zipties
they run at jedec
I am no stranger to jank
thats the reason?
but for once I want something a little more elegant ya know
lappies don't have XMP for whatever reason so XMP sodimms don't really exist
so they just run jedec
wow...
which is completely anemic
tbh even on a laptop that can do manual ram oc
yea cuz i was looking around for 32gb 5600mhz ram and found two options CL46 and CL40
the timings you can achieve aren't nearly as good as on desktop
picked CL46 because it was much cheaper
denser, probably lower quality pcbs probably play a role in that
the Gskill CL40 was like $95
i see
true, but i assume 3200 16-18-18-40 or whatever wouldn't be out of the question, and likewise middle of the road budget settings on DDR5
bc jedec 3200 is already supported, and the signal integrety requirements from tightening timings are marginal compared to upping frequency
best I was able to achieve on my 2x8gb kit was 3600 19-20-20
makes sense
2x16 3200 17-20-20
lappies have such limited control
1.3 vdimm in both cases
it's by design
they're engineered to fail
💀
can confirm
3200 gear 1 on the 2x16 kit runs at 0.9V SA
did you see that waterproof gel coating at computex or whatever? yeah, nobody is using that despite adding a couple of $ max to manufacturing costs because why on earth would you make a laptop that might (God forbid) last more than a year or two?
i7-11800H
much better to sell people garbage quality devices every other year for increasingly insane prices
6 gigga hurts?
no lol
yea seen that, planned obsolescence or whatever?
x3d still doesn't clock as high iirc, but way better now. i saw a couple of zen 5 non x3ds at 6ghz now
no exotic cooling
mhm pretty much
just a super cheap 240mm aio
fair enough
4 hundred?
okay looks like 5.6ghz all core isn't gonna be stable though lol
I mean considering a lot of people won't even run +200 on pbo
anything higher than 5.5 is great already
maybe, but i would say that >4 is a safe bet
OC voltage scaling on my 13600k goes too far after 5.3ghz
5.2 GHZ : 1.095v needed
5.3 GHZ : 1.130v needed
5.4 GHZ: 1.19v needed
wait really? i was doing 5.4 on my 7700x. i thought zen 5 clocked a fair bit better
7800x3d was typically running barely 5.0ghz wasn't it?
i really don't know jack about zen 5 lol. i saw zen 5% at launch and stopped watching 
yah. but that was artificial
it caps at 5.05 physically. iirc it straight up lacks registers for higher
have to BCLK for moar
idk, +200 pbo gets me 5425mhz so even 5.5ghz is a big boost if I can get that stable
pbo + bclk seems to make it slower than without bclk
i went from like 5.2 to 5.4 on my 7700x that way. before i destroyed its cap anyway 😔
can't be bothered to delid ever since they started soldering chips
last chip I delidded was 8700K
PBO adjusts to account for BCLK iirc. might be overcompensating
discord is straight up broken for some reason, sometimes when i scroll down the screen tears nearly half way. And other times will freeze to the point I have to restart it
I posted effective clocks on PBO in #overclocking
true but AM5 IHS sucks massively
i dropped like 20C
imma try to run the software through intel igpu instead
and my mount was abysmal lol
cores 1-7 got higher effective clocks, core 0 got quite a bit slower
weird
static oc is actually giving me effective clocks as expected
I'm sticking to 1.31v maximum
sad, 5575mhz not stable either
i know that cpu pushing past 200w easy
looks like up to 150w at 1.31v set (1.285v actual)
tbf I am not running the heaviest load rn
i guess it goes to show how inefficient raptorlake actually is
I figure if I run something heavier I'll hit thermal throttle and not actually get 5550mhz
I'll test heavier later but rn I'm using the same test I've been using for PBO
damn, 5550mhz not stable either
back to voltage bumpin
Ah
best to try all options
since 5425mhz is the limit at PBO +200
but it looks like I have a lot of voltage headroom
ofc will be extra happy with 5.5+ cause nice number
man it feels wrong to do static oc on ryzen lol
I think I would prefer top mount bracket over L bracket
L bracket looks like you can't center a 120mm fan on it
so it's just gonna look kinda weird
top bracket should be able to center a 120mm fan
just ordered the white top mount bracket I posted earlier, hopefully it works out
maybe a 120mm fan will allow me to daily 1.6+ vdd again
why is 5.5ghz static oc running cooler than 5425mhz pbo lol
damn I should have tried static oc way earlier, I wasted so much time with PBO
i can’t even tell
is this a good amount
it feels slightly too little
should i put a dot and then just press cooler over
yes i’ll clean it up
before
shit was a mess 😭
if you are unsure, it's better to have too much than too little
so long as it isnt conductive paste
well my issue is this thing came with an applicator and i swear it picks up the paste rather than spreading
i keep having to put more because after each spread it’s worse 😭😭
It does feel wrong but it feels so so good
This steam sale…
Has left me…
I think i could have gotten a new gpu with the amt of money i have spent on unplayed games 😭
This steam sale has left me nonplussed. I haven't even looked at it 
Self control… in this day and age?! Ur a god sir
I spent 28 on a season of Doctor Who just so I could have a remaster and reanimation of an unfinished episode they stitched together with animation
Also I bought a new USB-C charging cable
I’m cooked on the other hand
Is it Certified Wireless or Wireless Certified
How many years do u guys think it will take me to finish these games 
30.You'll forget you ever bought them and one day realize they were in your library
What is this formatting
Discord why do you do this
I was hit by a car while going to work
I'm working now though
i wish we just used wifi, or similar instead of bluetooth
i want wireless lossless audio
Mf people passing on the opposing lane as I'm about to turn left
nah im right
Oh u were in a car
Just shook
And a scrape and probably a bruse but yeah
Damn bruh
Did u get his insurance or car info just in case?
Android Auto does this
i think iphone auto does too
Apple Play... not always... sometimes it uses USB
it just makes sense, more bandwidth so u can get lessless
no, i own it
im not chinese
im american senator
but im not lying, i own a portion of egg
why? i love it here
my car was one of the introductory models for Apple CarPlay
i have carplay in my car
What is your vote for the Make Killing Illegal bill Mr Senator
ahh yes, nice bill, very good bill
Ya I think you're right about the top mount. I tried it before with a single L-bracket & looked sloppy but it was me rigging crap so kinda typical . Btw I'm surprised you need 1.6 for c30. I'm at 1.54 for c28. Maybe cuz DR? I dunno. What's ProcODT at? My board is weird tho
oh no im at 1.4 lol
Ah okay that makes more sense haha
define slow
14900KS
@upper rain
bet
6400c26 might be stable at 1.65 or less on this kit
like $60
Did you change the adapter settings in control panel>network sharing center>change adapter properties?
is this normal for steam to just randomly drop super low
nvm i figured that problem out
the ssd started to die
your super low is 20x what my peak on a good day with nobody else connected is 
looks like an ssd problem 
I'm using that $70/32gb DIMM Klev so you'll probably need less lol
no HMB/dram? 
technicaly BCLK lol
Lol don't it'll bork it
ima try my dram ssd
but that's not good for them
no HMB either thi?
idk
not having dram isn't an issue if it can do HMB
When did you get that fast internet
ever sense you started flexing on me
i couldnt let that sl ide
ok im trying my dram nvme
my hynix gold
How much did it cost even
my hynix is only silver ranked. not very good at shooters.
Sad
Maybe just have patience
i cant run gen 5 thoooo
no, i paid for this internet ima use it
5mins is too long
actually wait
the issue is no dram right?
what if you got optane
im using a SSD WITH DRAM
and used it as a cache
Doesn't your mother pay for it 
no
oh
she pays for slow
okay well still buy optane anyway it's cool
MY C DRIVE HAS DRAM AND IS SLOWEWR THAN THE DAMN NON DRAM ONE

LIKE WHAT
winblows moment?
i didnt test for too long but 6400c26 made it to 500% in karhu without erroring at 1.60v @idle nexus
i got a $50 kit lol
what is the voltage tolerance on a die ddr5? 1.6v is a little nutty for non-b die DDR4
gen 3 is capable of a lot more than 3 gbps
2v+
lordfoog wanna know what els is funny
nuh uhhhhhhh
wild, we're DDR3 maxxing
i had to download process lasso
ooh nice
pog
yeah
wanna know why
Apply to wifi too lol
sure
my wifi left me
steam refused to P cores so i was capped at 700-800mbps
Probably should've huh
i dont even use wifi lol
... yeah
Oh even better then
its still very quick 
thread director is flawless and has no flaws whatsoever
that's gigabits...
GBPS
even hard drives can do 2gbps sequential
you know what i mean
(maybe if the E cores were slightly less ass (enbiggened) and the P cores were made really big and not very many if them it would be easier to thread-direct)
wait
WAIT
WHY IS MY SSD SUFFERING at 3gbps..
WHAT
ORANGE
u want my slop
its a slop ssd
It's okay, you'll find a new, better Wi-Fi; one that loves & appreciates you. There's plenty of Wi-Fi in the sea. Time heals all wounds
yes i know what you mean but that doesn't make it correct
womp womp
pcie gen 3 is not the bottleneck lol
yeah
Weak PC
thank you, i needed this.
max bandwidth of pcie gen 3.0 x4 = 32 Gbps
idk what i need, better ssd or cpu
have you considered that it might be ur internet 😭💔
no
@upper rain b-die isn't the only ddr4 that can take >2v btw
if i cant keep up why pay for it
So don't pay for it, get a lower tier package
homie i don't think ur downloading enough data to max out a 32Gb/s link
put me on wiht settings before i uninstall it
8Gb hynix DJR has entered the chat
yah ik
heh
crys in crj
it sucks tho
360rad\
good for max freq valids
no
lol
Skill issue
the lower package has shit upload
the only reason i get 2gig is for the upload speed 
rev e is more fun for that imo and also is usable in a daily system because you can actually tighten timings neatly
the fact i own rev E
just not with me rn
nooo
bc it's with me ofc
i jut want st eam to always be able to use all my cores and everything els be default behavior
What do you actually need upload for
because non sequential speeds are ass
its a crime for isps to get super good download and trash upload
that's pretty insane ngl
i was happy with my 5.1 
i know bbg
😦
what's up
process lasso
casual ddr4-7200
how do i get it close to windows default behavior
Okay. But what are you using upload for to justify paying more for internet
ohh i think it depends on what game im installing
nothing, i just dont want shit upload
Have you tried asking Mr. St. Eam very nicely to use all cores?
Actually wasting money
when did u come back
im running out of games to download crap
Also yeah it'll depend on type of compression and compression settings for fast/slow decompress
yeah some decompress super slowly some are very quick
My man I use xfinity and their highest tier packages aren't cheap
its cheaper than what i used before 
Im usually here every now and then
pog
i don't own the program 
this game is the fastest iv downloaded
In this video, I'll show you how to correctly set up Process Lasso for gaming to maximize performance, reduce input lag, and ensure smoother gameplay. Whether you're playing Valorant, CS2, or Fortnite (or any other competitive game like Marvel Rivals or PUBG), this guide will help you tweak essential settings to improve game stability and respon...
i guess its time i manually set every single thing
whats the max speed ?
It also changes depending on what type of files you are downloading for the game
Certain types of files make download speed and/or storage transfer speeds go wonky
yeah
no download limit ?
Some of my older games keep assets in image files. And since there are hundreds of image files it tanks the download speed because it has to move a ton of small files
Sounds like a smart idea actually. Since it is usually a background application 
until it needs all the cores 
i had to change my power plan from balanced to high perfroamnce
app ?
its gigabytes easy tune lol
Installing steamos on a desktop and it's telling me my battery is low
Idk about steamos specifically but since it is built for movile devices it does have all the battery widget and such installed
Blasphemy
HMB is goated wdym
Nah I mean a drive not having one
oh lol
yeah i agree
that should have died back in 2012 or whatever
for the $3 extra it costs to add HMB support, every drive should have it
Nope sorry need to get more money selling you a device made for $10 using sweatshop workers
(This is an exaggeration but still)
i'd be impressed if sweatshop workers could assemble state of the art semiconductors tbh
Crazy how SteamOS just works and I don't need to install drivers for my sound card or graphics card.
So u did get their info on the chance that u might have suffered debilitating almost fatal internal trauma that hasn’t surfaced yet?
Well
They were long gone by the time I said anything here lmao
It was 2 hours after the crash that I mentioned it here
Any modern distro is like this
The three distros I tried just worked
The bigger thing is having a flawless experience with every single thing you run and having to find an alternative for everything
Damn… hope they suffer a fate where they die by getting eaten by bugs
Ngl thought every drive did
At least every drive I know of does

i almost have enough epic rewards for vbucks 
How do I take this off, i don't wanna risk breaking it. It's a part of the ssd slot thing for the screw
I mean, the factories for pretty much all tech is a sweatshop except the high end stuff. It doesn't take much to teach someone to slap a part onto a pcb
The case factories are the worse though
Looks like one of the newer ones that just have the twist thing to secure the m.2 drive without needing a screw, shouldn't have to remove it
I figured it out, thanks tho
Also sweatshops are a broad category
Love fireworks
i thought you meant the nand lol
yeah any idiot can learn to solder, i am case in point
and mainly it's just pick n place anyway
probably even simpler to just load reels into big machines
I remember someone told me it takes years to learn to solder 
Yeah, they probably have a couple people on reel loading, a bunch on the testing and finishing line and then they package them by hand and ship it off in boxes
A couple of pictures and videos I've seen just had rows of tables with people close to butting elbows with piles of either USB drives or NVMEs
Aaaand you’re a bot
He's a bit
@sullen idol if you’re not a bot, respond in 5 minutes saying “I like pizza rolls”
Ultimatum
gzwa9uukw19 was banned. | bot behavior over the course of a week
@lone mango
Why is that his first message
What happened
i was streaming gta and pc went black and gpu fans went to 100%
Are u troubleshooting the pc?
no
Might be just a one time thing, if it happens again u could hold the power button down to force shutdown
But u might have some type of instability on your pc if it happens again doing the samething or similar
My guess would be the cpu, but you’d have to stress test your components to see if that’s the issue
Maybe they aren’t a pizza rolls fan

Lmfao that’s funny
MOAR VCORE
It’s not even cpu related
This problem only starts when I’m streaming and gaming
Never checked
I know cpu is good, passed torture test all night
my gpu
@idle nexus i knew wit, my g pu
hey @grand kernel im you now with weird problems
Is it just streaming
Does your old card work
Can use both one for streaming one for gaming
O
@idle nexus i fouind issue, enchanced broadcast breaks my gpu and nothing on the internet is saying its causing issues for people
Waddupppp
Fr
taking time to actually customize my steam profile and i actually got to use my steam points for once 🗿
show it
sitting here for 2 hours 🗿
@idle nexus thoughts on how I can stabilize higher frequencies with PBO?
CCD1 is being a CENDORED to me.
@fresh timber congrats on reaching Vet rank!
No Sugar Monster (to avoid the nasty energy drops), Health Mushrooms such as (lion's mane, cordecepts, rishi), vitamins from actual fruit, balanced mineral levels, and plenty of sleep.
Fruit and sleep I can do lol. Mushrooms make me gag though.
Rico
Rico?
Also cold air helps me a lot.
When I get hot, I become extremely frustrated and my thoughts process slows down. Exact opposite when I am cold.
But sugar
Calories
Yummy
Like a cpu
It needs to be hit on something sometimes.. to unlock it. Like someone wake up that knows math and stuff..
Lmao yes.
Though I am far more tempermental based on the temperature.
Loll
omg
carnage with multiple people
Rip everyone's computer
I hate being hot but I have to do it for my job
Need help in search of a desk mounted monitor stand that would allow for a setup like this
so apparently haircut places in Korea has mirrors with video, ads, and chat gpt apparently
Might have to do 3 mounts
why

never getting a haircut again if my hair stylist has this
Blanc
How do people go about running 5 to 6 monitors? Is it another gpu?
Uhhh that or you could get some dongles probably. Get another opinion tho
Dangles would mainly just duplicate the displays right?
Would running 2 gpus cause me to loose proformance?
Idk
Not necessarily
Would I have to do anything special besides telling the game and other certain applications to use the better one
I stopped going years ago because I didn't want to spend money on it. Bought some clippers and do it myself.
Honestly this just looks a bit ridiculous to me but if that’s what you want you probably want a fixed truss style mount
Something like this https://www.proaim.com/products/proaim-multi-monitor-mounting-system-for-video-camera-production-carts
or this
https://www.ergonomichome.com/bild-3-over-3-monitor-mount.html
Mounting frame w a 5/8 baby pin holds multiple production monitors & other accessories; Clamps to 38mm mast of Cart; For Proaim Soundchief Cart, Victor & Atlas Cart Series
The Bild 3 over 3 monitor stand suspends six monitors in two rows above your work surface. This multi-monitor mount, assembled in the USA, features a robust and solid construction for durable performance. Designed for use in a wide range of work settings, the Bild 3 over 3 is a highly adjustable monitor stand, enabling monitors to easily be inst...
But you gotta be prepared to spend lol
Perfect sim racing setup
I like the top one since it would be not too hard to mount cameras and other equipment but that specific one is more meant for production, i think all the monitor mounts use babypins instead of vesa
I wonder if there are VESA babypin adapters
There are
But that's an additional cost per monitor lol
Umm I’m pretty sure there are somewhere. People mount almost anything to c stands and other production mounting systems
Oh yeah
Damn some of them are like 100usd+
hmm I kinda wanna redo 12900K loop with PEX but I'm worried about the compression fittings holding since apparently PEX tends to expand & contract with temperature variation
heck I wish I knew but I don't think there's any way to give it more voltage. Maybe try static OC since 9xxxX3D lets you set multipliers no?
Me when some one thanks me for asking for their ID for cigarettes while there is a sign directly in front of their face saying IDing is mandatory for everyone now
Had a dude get cigarettes three nights ago, came in the next day for another pack and was annoyed that he still had to show ID 
Like dude, my company has made it mandatory and there is literally a sign explaining it, what do you want from me
fr
they want you to risk your job just because
and yeah, not worth it at all
the law is the law
Well the law is actually anybody 50 and under needs to be ID'd, but the company said screw it everyone gets ID'd
easy way to reduce liability
Theo_old
Wawa & 7-Eleven scan the ID here
which is a great excuse for everyone to be IDed I mean
cuz you can be like, bro I can't finish the transaction until the computer scans the ID
i think i am just going to run a 6 monitor setup now, it will cost a bit more maybe but also be more easy to setup
wall mount em all
What does blud need 6 monitors for😭
i want 5 but no good mounts for how i want it so 6 will have to do so i can mount it
What do you need so many monitors for tho
these are pretty good. I have two of them. It's like the thing at the dentist they can move up down, side to side, etc. https://www.amazon.com/dp/B01NBYJ6X6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16&th=1
Please Check the Mount Applicable List: Screen Size: Up to 32” Weight Capacity: 19.8lbs Mounting Holes Size: 75x75mm and 100x100mm Wall Plate Size 6.625” (H) x 2.5” (W) Mount Adjustment: +75° ~ -45° Tilt +90° ~ -90° Swivel 360° Rotate Max Height Adjustable 9.5” Max Extension 17” Package Include: ...
you use an allen key to increase/decrease pressure in the piston thing to handle the weight well
Is that the same one that did it with the black room and the tiny face
photo editing mainly when i have to move photos around i like being able to see everything, dnd so i can make sure i am doing what id like and have one just for discord as always
I use my side monitors for separate systems. Maybe I should hook them up to main again for the heck of it
PEX would be interesting
I'm just worried the fittings won't hold
that white pipe would look nice
obviously not that one since it's 3/4 but 1/2 has outside OD of like 15.87mm which is close enough to 16mm & the same as copper 1/2 OD
not sure if those little pipe inserts would fit that keep the pipe's integrity
I'm also thinking I might just use 1000 grit sand paper to frost the existing PETG
Yeahhh I usually use barbed fittings with the metal hose clamps on them
Wouldnt trust normal PC fittings
it's easy to do just time consuming
exactly haha
problem is id need to use 2 gpus
& even if I was willing to deal with that headache, I'd still have to find a way to convert them to g1/4 to get into blocks & rads
ya I'm not sure many GPUs have 6 ports lol
many have 5 I think... use iGPU for discord lol
^
@idle nexus do my pc with custom fittings
I don’t have any need for liquid cooling a 5700x, but still

ill do it
and i know nothing of how to use/set up where my 3060 would be used for certain monitors and my 1660 used for the top ones
I also thought about using a press tool to put press fittings on copper pipe but I think I wanna avoid copper again that was a headache
My next PC probably will be copper piping
ah CPU blocks can be reused lol
1/2" copper fits in regular 16mm compression fittings really well. My biggest issue was 90s. of course you can just use dual compression fittings but that's kind of expensive. I bought 90s to solder on but my soldering skills made me not use them. I also got a crossbow bender but didn't realize how horrible the bend radius is. 3" bend for a 90 is huge in a computer case
plus you gotta anneal the copper
I tried using refrigeration pipe too but even with that tool to straighten it, it doesn't get perfectly straight like regular Type L/M sticks



