general-chat

[sinful blade]

That cable management makes me happy

[idle nexus]

lol I try too hard on that ngl

[sinful blade]

Mine’s still ass

[fresh timber]

Ggodo

They make disteo plates for my case

[fresh timber]

https://www.performance-pcs.com/products/channelztm-phanteks-nv5-replacement-front-panel-distribution-plate?srsltid=AfmBOoqAedXuCWcVPGz-zfHYaQcIOAVwI-iLaWSP7zMrkmPNTz4jMLGY

[idle nexus]

this might be the best one lol

[idle nexus]

these are awesome imo

[fresh timber]

I’m ngl ima start with soft tubing if I do it

[idle nexus]

ZMT is great

very easy

[fresh timber]

Dual radiator just cause I can lol

[sinful blade]

I wanna do some hyper sneaky management, but it’s hard with this old case

[idle nexus]

the fittings hold really well

[fresh timber]

Yes yes

Distro or pump res

What would you do

[idle nexus]

like you could probably lift up your whole PC with how well those fittings hold

distro is great if it doesn't cost you a radiator slot like on your case

[fresh timber]

lol

[fresh timber]

They also make distros that cover the rear 120 in my case

Oo this is cool cool

cool

[idle nexus]

this one was alright

[fresh timber]

I don’t trust my self to do hard tubing sadly

Ima be a soft tubing noob

[idle nexus]

damn that looks really nice imo

[fresh timber]

How would you plan your loop if it’s cpu and two rads

[mental yoke]

case first

[fresh timber]

My existing case

If I have two rads would I connect in and out of both rads tighter then connect cpu block?

[mental yoke]

half the rime I’m doing water i don’t understand where the flow is going but i just plug it and go

[fresh timber]

Lmfao

I should buy the phantex ez later

Comes with everything you need

[idle nexus]

damn performance-pcs doesn't have ZMT anymore (EK's EPDM tubing) but they sell EPDM by the foot

not tons of it in stock tho

I assume they'll restock

they have it as low as $.99/ft

whaaa

[mental yoke]

like if i had to map that flow :???:

[fresh timber]

Okay looking into it, better AIO makes more sense, my friend has a custom loop pc and he always talks about running low on fluid

[fresh timber]

Idfk man, I’m confused to

[dusk knot]

Hmmm

[dusk knot]

Daym

What a machine

[idle nexus]

lol it's kinda confusing cuz distros don't have a single in or single out

[mental yoke]

see, i didn’t know this. ty

[idle nexus]

npnp

[mental yoke]

life makes sense now

but for real i did not know that

[idle nexus]

manifolds are like that too lol https://www.performance-pcs.com/products/ek-pro-manifold-2cpu-8gpu-acetal

8 in 8 out

[mental yoke]

so its basically just a reservoir to pull from and dump into?

[idle nexus]

ya which I never really understood how those work well

[fresh timber]

I’m waiting for next Intel update

[idle nexus]

cuz it seems like some connections closer to the source would get more pressure?

[fresh timber]

When Intel drops stacked cache I’m going to that xpu

[idle nexus]

I don't understand fluid dynamics lol

[fresh timber]

I understand a little

Fluid still is interesting

One thing I’m hate is when your fluid evaporates

My friend has to refill his loop all the time

[idle nexus]

heck that's kinda strange

[sinful blade]

@idle nexus how to I go able managing my case

[fresh timber]

He uses distilled water

[idle nexus]

I mean when you first fill it, there are lots of bubbles that work their way out over time but eventually it should be completely full

especially in GPU blocks

[mental yoke]

yea evaporation happens faster then i thought in loops

[fresh timber]

Yeah

I think pure water is why his evaporates fast

If he uses some additive he would prob have a longer life

[idle nexus]

extensions are your best friend tbh

[mental yoke]

i remember popping open a system after a two years and was surprise how much i put into it to top it off

[idle nexus]

like you can always bundle up extra cables but you can't make them longer ofc

hmm will this be interesting? https://www.youtube.com/watch?v=RNonfByE9xc

[fresh timber]

Not for me

Same for Argb

My pc is a lost cauzw

Just don’t look at the back

[idle nexus]

lol out of sight out of mind ez

I have glass so I have to be crazy

[fresh timber]

I want the haven420

Also I might be getting my real pcmtommrow

Depends on weather

[idle nexus]

this was the jawa PC I sent to Michigan lol

[fresh timber]

wow

omg ggood

im not taking this pc back

wanna know what im ding instead

cause i was going to bring some of my crap back to my moms house and bring cloths and a pc

but now ima just keep both pcs here sense ima sell one

[lone mango]

[fresh timber]

13600kf 9070xt

fun fun fun

this is going to be fun, ima use steam local transfer to transfer game files,

[sinful blade]

Wym

[idle nexus]

what?

[mental yoke]

psu extensions

[idle nexus]

PSU, fan, aRGB, etc. extensions make it a lot easier to organize cables

[sinful blade]

I don’t have the problem of reaching the components, it’s the excess wires I have going to them

[fresh timber]

so im going to keep both pcs at my dads, im harvesting storage, ram, and fans from the 2nd pc, im ordering a new case and nvm im taking it home i have to bring another psu too

im taking this pc home

[idle nexus]

oh then you gotta do one of these silly get-ups lol

[fresh timber]

ggood i have a question

[mental yoke]

gotta find the spots to fold them into if its not modular, some cables arent swappable

[fresh timber]

if i put this boot drive into my 2nd pc, can i access the steam folder

[mental yoke]

you can

[idle nexus]

you can but if they both had windows 11, it could get strange

[mental yoke]

but back it up just in case

[fresh timber]

yeah. they both wind 11.. i just want the games

[idle nexus]

windows 11 seems fine with another OS installed as long as it's not windows 11 lol

but by default it should boot the other one

[fresh timber]

i just wanna transfer the games from the 2nd boot drive, then wipe it

[idle nexus]

& the other boot info won't appear unless you go to admin cmd & type: bcdboot [drive letter]:\Windows

[fresh timber]

my dad internet is poopy so updates and reinstalling games will take a long time

[sinful blade]

Sad

[idle nexus]

I think once you transfer them, if you go to steam & try to download the game to the folder where you put the game, it'll realize it's there

[fresh timber]

yeah

all i want is the games, nothing els

im wiping the drive after

[idle nexus]

your save files might be in Documents depending on the game

[fresh timber]

yeah

im just grabbing marvel rivals, gta and a few others

prob 400GB worth of crap i DONT want to reinstall

[idle nexus]

Marvel Rivals? Epic Games Launcher doesn't seem to recognize previously installed stuff

[fresh timber]

that iwll take littrely days

[fresh timber]

rivals is on steam

[idle nexus]

like I had to redownload Fartnite even tho it was already on the drive oddly

[fresh timber]

steam is friendly with diffrent drives and what not

[fresh timber]

theirs a work around but if ur intenet is good, just reinstall

[idle nexus]

cuz I just wiped C:\ last time I reinstalled windows

lol ya I reinstalled to the exact same folder & ig it overwrote everything

[fresh timber]

i have a 1tb silcon power thats the boot drive now, that will become the game drive for my system :p

[mental yoke]

I’ve had luck sometimes just randomly putting pieces of the full data set into the downloading data set, but its dumb and annoying. just funny it’ll bypass it sometimes.

[fresh timber]

my main righ will have 2.5gb of storage :)))

if i add another 500gb ill have 3tb

but idk if i need all that

what ill do is keep the drive with and install it later

[idle nexus]

I'd try to avoid 500gb

[fresh timber]

i already have it

it dont hurt

[idle nexus]

ah okay

ya if you already have it

[fresh timber]

its in my main rig cause 1tb wasnt enough but 1.5tb is perfect

adding this 1tb.. i could just remove it but i want to have 3/4 nvme slots filled

[idle nexus]

I wish I'd gotten 1tb at least

the 500s end up benching drives

lol

[fresh timber]

its funny, my drives are pcie gen 3, and my chipset opperates at gen 5. meaning i can littrely slam all my drives and i can saturate ALL of them

5.0 is like 4 times as fast

[idle nexus]

lol I don't own any 5.0s :(

[fresh timber]

same

only my gpu will run 5.0

[idle nexus]

I don't think anything I have runs on 5.0 lol

[fresh timber]

i have no want for faster drives

3000mbps is enough

i really dont notice it

[lone mango]

This is surprising

[fresh timber]

hell im using a d rive thats 1000mbps and its perfect

[fresh timber]

storage is the one thing idc how fast it is

just dont make my expirence shitty

[lone mango]

Good take

Im still on gen 3

[fresh timber]

and when i transfer files between nvmes, its very quick

[idle nexus]

I don't think--or at least never noticed--a storage bottleneck lol

[fresh timber]

my ONLY requirment for storage is having cache for file transfers

[idle nexus]

I really don't notice a difference between my Solidigm whatever M.2s & SN850 or AcerGM7000

[fresh timber]

this ssd is soo bad

this drive gets maxed out very easily

not even kidding, a steam download at 50mbps can make this thing max out

[mental yoke]

is it full?

[fresh timber]

no

i left around 20% left

its just a shitty ssd

[mental yoke]

id literally take a hammer to it and get more enjoyment destroying it then using it

[fresh timber]

good speed tho :p just no cache

[idle nexus]

Fallout4 drive

[mental yoke]

oh thats fine

[fresh timber]

yeah its fine, just the normal no cache problems

[mental yoke]

i had a skyrim drive before

[fresh timber]

1tb is NOT enough

[idle nexus]

lol it's ridiculous

wiztree is so awesome

[fresh timber]

fr

i cant wait to nuke this install

[lone mango]

Get talon

[fresh timber]

i know what im doing, im installing 4 nvmes into my pc tommrow

[lone mango]

Just make sure to completely turn off defender and make an exclusion for the entire drive

[fresh timber]

do i need 4? hell no, do i want to? yes

[lone mango]

Because defender will still remove talon even when it is off

[idle nexus]

all FO4 crap lol

[fresh timber]

wot

13600kf 9070xt

i wonder how that will go

[mental yoke]

i love block breakouts

[fresh timber]

should i wipe emy 500gb linux drive and put games on it

so i can get to benchmarking quickly tommrow

[sinful blade]

Go download TTW

See how bad that gets

[craggy shoal]

ur mom drive (the image is still transferring to the drive)

[idle nexus]

lol it really helps put it in perspective

[fresh timber]

if roomba lied near me id deadass let him borow my gpu

..... chat do i run three gpu setup tommrow

[craggy shoal]

yes

run three GPUs

[fresh timber]

9070xt, 7700xt, rx6600

[craggy shoal]

bruh

[idle nexus]

or run two then download GPU Lossless Scaling on Steam for like $6

[lone mango]

People say to not go above half the capacity but that is not realistic

[sinful blade]

Chat do I run a single gpu setup today

[craggy shoal]

more AI power than a 5090 atp

[sinful blade]

1660S

[mental yoke]

no

[idle nexus]

you can framegen on one GPU & render on the other

[lone mango]

I would say to not go above 2/3

[craggy shoal]

Chat do I pair my 6800 XT with my 4070 Super

[idle nexus]

no seriously GPU Lossless Scaling is awesome

[lone mango]

Dude I combined nvidia and amd and got 1400 fps in fortnite

[tall pine]

Awesome setup.

[idle nexus]

like you can actually use more than one GPU for gaming lol

thank you!

[fresh timber]

oh i cant

my second 16x slot wont let me fit a gpu with out hitting my psu shroud

[craggy shoal]

no way can't wait to get 9001 frames in Minecraft

Can't wait to play Runescape with this kind of power

[fresh timber]

thats 34gb of vram

[lone mango]

https://www.youtube.com/watch?v=NTV39BNHI-w

[idle nexus]

with lossless scaling no?

I think I watched that

[craggy shoal]

oh you weren't joking about 1400 fps 💀

[lone mango]

I barely remember the video I just remember the title

[sinful blade]

I wish I had one of those rich friends who is like “oh sure, I’m not using this 3060 anymore, you can take it”

[idle nexus]

I ran 3060 12gb with a 1080ti for frame gen & was getting like 100fps on 1440 in RE4

[craggy shoal]

Wow I might actually pair my 2070 Super for something like that

[idle nexus]

you can set FPS target & it'll framegen as much as it needs to (beyond 4x lol)

[sinful blade]

I’d kill for a 1080ti atm
11GB of vram would be nice for games

[craggy shoal]

Now only if I could combine VRAM for an ML setup

[fresh timber]

i would run 9070xt and 7700xt toghter properly but i dont feel like taking my motherboard out the case and everything

i need a 16x riser i dont wnat to buy

[idle nexus]

Adaptive framgen

FPS target 145 lol

[lone mango]

Wow that guy just keeps adding stuff to it

[fresh timber]

i want a 3050 6gb cause its one slot wide

[tall pine]

@idle nexus I was told to ask you about water cooling and RAM.

If my 2x32 kit can do tRFC 384 does that mean it's likely Hynix A or M? I can send a picture of the timings in a sec.

Also you appear to be very good at custom loops. How hard would you say it is to set up and maintain one? I am very tempted to get into custom loops, to loop the CPU, RAM and GPU as I get the $$$ to loop each part.

[fresh timber]

i told you :)))

[tall pine]

Thank you.

[mental yoke]

where this

[idle nexus]

Steam--it's called Lossless Scaling

[mental yoke]

ty

[idle nexus]

2x32gb is very likely Hynix A. I have 2x23gb in here that's Hynix A. Afik, M-die is only on older 2x16gb & the 2x24gb DIMMs

[sinful blade]

https://www.jawa.gg/product/81270/zotac-rtx-2070-oem-blower
I want this so bad

[idle nexus]

I think there are DR Hynix M-die DIMMs but they're the 2x48 ones

M-die tends to run higher frequency but looser timings

tRFC 384 at what frequency?

[tall pine]

Purchased about two years ago the RAM.

[idle nexus]

damn I used to know the formula by heart to convert tRFC into ns...

oh okay ZenTimings did it for us haha

[tall pine]

6400 1:1.

Apologies for the picture vs screenshot. I am trying not to interfere with the VST3 run.

[idle nexus]

damn nice timings

heck tRC will go that low?? I need to redo some stuff I think haha

I always followed tRC = tRP + tRAS

[tall pine]

Technically it can do 32 but that doesn't post for me 😢

[tall pine]

I thought so to but noticed that BZ doesn't use that formula and that my Karhu speed went up the lower I got it.

[idle nexus]

damn my board doesn't let me set tRCDWR different than tRCDRD

[tall pine]

Really???

I thought Taichi is like Asrock's high end oc board.

[idle nexus]

ya this board has been goofy at times kinda drives me nuts

damn your ProcODT is 240??

holy heck

[tall pine]

30 in bios.

Just ZenTimings being weird.

ProcODT UP = 30ohms
Rest are auto

[idle nexus]

heck you have more info than mine gives me

[tall pine]

I have the System Info from ZT open.

If that's what your talking about.

[idle nexus]

what DIMMs are you using? I'm using super cheap Klevs lol

[fresh timber]

Good

Donate a gpu to roomba

[idle nexus]

yours shows more I think

and actually reads VDD/Q

maybe cuz your CPU is way better or something haha

[fresh timber]

What’s easier you think

[lone mango]

aired

[fresh timber]

ram on 5500 or ram on 13600k

[tall pine]

2x32GB 6000cl32-38-38-38-80 @1.35v Kingston Fury Renegade no RGV with this janky cooling.

[idle nexus]

damn that MSI board

reminds me of Unify-X (RIP)

or wait, didn't they do Unify-X for Z890? I forget

[fresh timber]

Gpu upgrade when

[fresh timber]

If I had cash I’d buy him a used 2070 2060 something 😦

[tall pine]

Hopefully in a month or two.

[idle nexus]

If I could do it all over, I'd get MSI ACE

[tall pine]

?

[idle nexus]

it looks nice as heck

[tall pine]

Ahh thank you.

[idle nexus]

like MSI Unify-X

with the black/black

[fresh timber]

Which card

[idle nexus]

does Corsair not make that RAM cooler anymore?

they have the old single fan one

[tall pine]

It's the MSI X670E Gaming WiFi Plus (got it from Amazon Refurb Excellent for $150 😁)

[idle nexus]

+I still have this one that I blew out the RGB by connecting the wrong cable the first day I got it haha

[tall pine]

Plan is to save up $1,000 so ideally a Refurb 5080 or maybe a 4080 super. Possibly consider a 7900xtx if I see a really good one for like $800.

[tall pine]

That looks really nice.

My RAM peaks at about 48.5c with my current timings and setup. Ambient is between 14-16c average.

[fresh timber]

Join 9070xt gang

[tall pine]

Peaks for about 18c for a few hours

[tall pine]

I'd like to be able to enjoy Blender thank you very much lmao.

[idle nexus]

maintaining is pretty easy for the most part but at least like 1-2x a year you gotta totally drain it, clean out the blocks, & give it a good cleaning. Fittings are what cost so much cuz you need a lot of them but they all look pretty similar to me for the most part so you can find ones on like performance-pcs on sale when you know how many you want. I suggest getting at least two extra lol

a lot of it's kinda gimmicks or paying for big names imo

[fresh timber]

Wait for hip easy

[idle nexus]

like you definitely want a reputable pump manufacturer

then again I say that & I've RMAed two Thermaltake & one EK pump

yet my Barrow is the oldest & has never had an issue

[tall pine]

I was planning on getting the Apex CPU and Apex RAM waterblock from Alphacool

Are those good?

[idle nexus]

Alphacool makes really good stuff from my experience so definitely a solid choice

I put this thing in my son's computer & it's had zero issues

https://www.amazon.com/dp/B082Y6F5QK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_7

not that I suggest getting really cheap blocks lol

also I made the mistake of getting cheap fittings & had one blow out

still have no idea how my PSU survived ngl

cuz lights were flickering as it flooded lmao

as far as setting up, it depends a lot on what you're using

[tall pine]

How annoying is it to drain/clean out radiators? My original plan is to get a Alphacool UT60 420mm rad and put it on the side of the HAVN 420 case in push/pull with a positive pressure setup.

[idle nexus]

EPDM (EK's ZMT is more expensive but same thing) is relatively easy. PETG is probably easiest for hardline tubing but has a relatively low melting point. When my EK block failed, my tubing warped from the water getting so hot by the CPU

Arcylic is better for plastics but it's just brutal to work with imo. It's very hard to melt to bend it & you have to cut it with a hack saw or it'll crack sooo easily

[idle nexus]

radiators aren't too bad. It's just a lot of screws to undo with all the fans & mounting

then just fill them up with distilled water & shake the crap out of them

honestly the biggest mistake you can make is using like opaque coolant

well biggest mistake I made

I clean some radiators & still get a tiny hint of electric purple lol

[tall pine]

If it can all be done in a few hours that's perfectly fine.

[idle nexus]

ya it's nothing crazy

the blocks can be annoying because you have to disassemble them entirely

[tall pine]

Is Glowing tubing still a thing?

[idle nexus]

a lot of people run only distilled water but I'd at least put some sort of add-on with it. der8aur has a recent video describing what only distilled does to blocks. He can explain it much better

ehh I know there are fittings you can add to make tubes glow

[tall pine]

Add something to prevent growth in the water right?

[idle nexus]

these are expensive as heck imo https://www.amazon.com/Thermaltake-Pacific-Premium-Fitting-CL-W185-CU00BL/dp/B07ND7WW4T?th=1

ya there are biocides you can add

[tall pine]

Cool but yeah to much.

Especially since I would need like 20 lmao.

[idle nexus]

I've been messing with just putting a tiny tiny bit of car radiator fluid lately. The Ethelyne glycol will prevent any biological growth (that stuff can really damage humans so I doubt bacteria/algae has a chance) & it also has corrosion inhibitors

[tall pine]

Interesting. Has it affected temps?

[idle nexus]

tbh I'd get either clear or only like slightly colored official coolant from like alphacool, meyham's, etc. to be totally sure

I haven't seen any impact on temps. I'm running so little that it's barely even changed the coolant color tho

I've never really had issues with algae or anything tho. tbh I'm not sure how that even happens

I think if you leave the computer where sunlight can get into the coolant that can cause it? not entirely sure tbh

[tall pine]

Gotcha, well if it works out let me know. I will probably copy you.

[idle nexus]

I'll let you know if I see nickel plating or something in the waterblocks

that would be terrible but lmao

ya I'm happy to help as much as I can. There's a watercooling discord but last time I was there the people weren't too friendly

granted this was like 3 years ago tho so it may be completely different now

a lot of people seemed like they were there to justify their decisions rather than discuss decisions or offer help

[tall pine]

Off topic but do you think 8hrs Karhu Cache+FPU and 2hrs VST3 is enough to call the timings stable? I ran Karhu for about 2 hours before this 8hr run.

[idle nexus]

I have a Karhu license but I haven't even ran it. I ran VT3 like 208x last time I called it stable so I'd think that's probably plenty

[tall pine]

K

I am 1.59^10 right now.

[idle nexus]

so ya like 8 hours

[tall pine]

Only thing left is to try raising fCLK from 2133 to 2200

[idle nexus]

I can't remember if yours would take longer to reach 208x because you have 4 more cores

[tall pine]

I want to 1.6^10 before doing CPU so badly

[idle nexus]

I've been meaning to set core offset magnitudes for so long lol

I just like put -15 or something & never got around to actually doing it like I did with 5900x back in the day

[tall pine]

I do about 30 iterations an hour.

[idle nexus]

I was using CoreCycler but it would pass then an all-core load like Cinebench R23 would crash it somehow

[tall pine]

CC is good for testing single core so my go to for that is to usually run CC till I am confident in the Single Core boost then run an all core load.

For that exact reason lmao

@idle nexus do you have any experience with TG's Kryosheet?

I am debating purchasing it for my 9950x3D to drop temps.

[idle nexus]

I haven't used those

I use liquid metal on everything

cuz I like to rip off IHSs

[tall pine]

My temps during the day currently peak at 75c and 68c at night.

[tall pine]

How hard is it to safely remove the IHS?

[idle nexus]

with the tool it's really easy

that's really not bad at all

I dunno that it's really necessary on AM5

it's just a habit since 10th gen Intel for me ig lol

[tall pine]

I want to keep my temps below 65c because I noticed with PBO that 65 vs 70c is about a 50-75mhz difference for the boost clock in all core.

[idle nexus]

I used this https://www.amazon.com/dp/B0BVKYQDMB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_7

[tall pine]

Do you need to heat up the CPU?

[idle nexus]

it might come off a little easier but you don't have to

[tall pine]

So how does it work?

[idle nexus]

if you get this waterblock, you can delid your CPU then throw this on top https://www.thermal-grizzly.com/en/amd-mycro-direct-die-pro/s-tg-my-dd-p-amd

you basically set the CPU in there & it has screws you tighten to push the IHS from different angles & break the solder & glue

[tall pine]

Going to start testing fCLK 2200.

[idle nexus]

misread?

[tall pine]

accurate

[idle nexus]

ohh

sorry I thought that was you testing it haha

my bad

[tall pine]

All good.

I have been running fCLK 2133 and now I am going to try for 2200.

[idle nexus]

iirc 2200 ran benchmarks but wouldn't stabilize for me

how much VSOC do you need for 2200?

I'm at like 1.295 & 1.3 is max on this board

[tall pine]

Haven't tried yet, I know that higher vSOC makes high fCLK unstable.

[idle nexus]

setting the LLC for SOC can help

it was tricky because frequency seems to scale with FCLK voltage

[tall pine]

I had to raise my vSOC from 1.175v to 1.205v to stablize Nitro 1/2/0.

[idle nexus]

maybe I need to drop mine a bit

oh ya I forgot about Nitro

there's also another thing you can mess with uh

[tall pine]

Do you know what the safe limits for VDDG-CCD and VDDG-IOD are?

[tall pine]

👀 TELL ME!

[idle nexus]

I think I ran VDDG at like... it's been awhile let me check HWiNFO

or hold on one second let me go to BIOS so I can find that other clock thing to mess with lol

Heck this takes forever cuz I need to disable memory context restore to be able to disable power down on this board

[tall pine]

I know the feeling.

[idle nexus]

Otherwise it BSODs windows like every heckin time

[tall pine]

Still better than my last 7950x3D which had a boot problem.

[idle nexus]

Oh... I guess I left VDDGs on auton

[tall pine]

It would get stuck during the CPU/RAM training phase and only through constant restarting would it eventually get into windows then work like nothing was wrong.

[idle nexus]

Ohh it's LCLK

[tall pine]

What is that?

[tall pine]

Heya Strix, how you been?

[cedar compass]

heyy

I'm doing good. wbu

white strix 5090 wen

[idle nexus]

I think it helps stabilize like USB & crap when FCLK is running higher

sorry was restarting

I'm gonna look into it more so maybe leave that alone for now lol

[tranquil pebble]

RTX 5010 when? /j

[tall pine]

I can't find much info regarding LCLK.

Apparently it has something to do with the PCIe communicating with FCLK?

Btw so far FCLK 2200 is rock solid in the 1.59^10 speed in VST3.

[idle nexus]

I think I need to mess with mine cuz I get occasional errors with the Wi-Fi driver

nice. ycruncher is brutal lol

[mental yoke]

i need to rethink my wireless peripherals cus having 809 devices is making it and they just disconnect

[fresh timber]

https://youtu.be/afnvli8daLU?si=7u07C-XxHfwUhYfE mhhh

7800xt is pretty good

[tall pine]

Do you know if it's safe to run 1.1v VDDG daily?

I want to see if I can push for 2233 fCLK.

[lone mango]

Always was, it was pretty good value even a while ago

[idle nexus]

tbh I really don't know. I'm trying to figure out what it runs on auto cuz I didn't even set it

[lone mango]

Actually I forgot

I keep forgetting its like a 6800 xt

So nvm

[tall pine]

Do you know if running VDDIO above 1.4v is safe? For example 1.5v.

@idle nexus

[idle nexus]

ngl, I don't know for that either... does it turn red in BIOS? lol

I think I run 1.35 or even less

oh wait I only run 1.25

[tall pine]

Cause I know that my CPU can game and browse at 6600 1:1 but couldn't survive more than 2 hours of Karhu

I just saw some posts of people running 6600 1:1 but they mentioned they are running 1.5v VDDIO.

[idle nexus]

I didn't see much scaling with VDDIO for some reason

damn that sounds high to me

considering VSOC is capped at 1.3

[tall pine]

Yeah that's why I wanted a second opinion.

Mine is at 1.4v currently.

[lone mango]

Yeah thats the max safe voltage for soc

[idle nexus]

before they capped it, high SOC could do crazy things from my understanding

[tall pine]

Granted your chip will go boom boom from the heat

[idle nexus]

super smart captain guy on my hwbot team ran this

7000 1:1 at 1.5v VSOC lol

probably on LN2 tho

VDD Misc 1.4 jeez

[tall pine]

Over-volted.

I doubt that's daily though lmao but awesome numbers.

[idle nexus]

lol no way it would probably burn up

[tall pine]

Holy smokes WHAT GOLDEN RAM KIT DID HE HAVE???

7,000 at 1.25v VDD

[idle nexus]

probably misreads

ZenTimings still doesn't read VDD/Q on my CPU at elast

[tall pine]

Rip

[idle nexus]

& that's an old version

[tall pine]

My biggest issue right now is HWinfo for me since swapping to the 9950x3D does not show boost clock only effective clock

[idle nexus]

did you set snapshot polling?

[tall pine]

Not does it show me all the different powers like EDC, TDC etc

[tall pine]

?

[idle nexus]

the explanation lol

it won't show each thread once enabled tho

[tall pine]

It was off.

[idle nexus]

like Core 0 Effective clock won't show Core 0 Thread 0 & Thread 1 individually just Core 0

[fresh timber]

chat

[mental yoke]

core 0

[fresh timber]

i just fo und out i neevr had pixel overdrive on

i just turned it on and my panel feels sooo much betterrr

it feels like a new display

[idle nexus]

do you have drivers for the panel & color profile installed?

[fresh timber]

i dont know

i dont think i haev drivers

when i turned it on, im having struggling with my mouse

like you know how u get used to a display and mouse so where you go is where you land

i turned pixel overdrive on and now im overshooting

so much more smoother

i dont want a new panel anymore, this is alot smoother

[mental yoke]

ive been reading the 5090 will do 8k 100hz but samsung hasnt unlocked the edipi or something on their panels

gated behind connectivity tech

[tranquil pebble]

https://tenor.com/view/persona-5-gif-9531669005278926942

[viral heron]

if i update to lastest driver version in amd adrenalin do i need to remove the old one

[fresh timber]

nah

just update and ur good, if you have problems run DDU and reinstall them

[tall pine]

Just learned that my HWinfo is way out of date, updating it now.

[fresh timber]

@rancid juniper mods dont work on latestt update ;/

[rancid juniper]

???

[fresh timber]

when i drag mods into fresh install of gta it doesnt work

says it failed to start

[rancid juniper]

not alot of mods work with GTA enhanced

[fresh timber]

gta enchanced mod u sent me

no work

[rancid juniper]

strange

Are you sure you installed the right GTA?

lol

[fresh timber]

im on enchanced

[wary fjord]

Lol their 4090 is weaker than your 4090

[fresh timber]

i updated he game last night and it broke, i reinstall and remod, doesnt work

ima reinstall the pack

[rancid juniper]

try that

[fresh timber]

reinstalling from website

i refuse to play with out the mods

[tall pine]

I think I downloaded the wrong version

The UI looks horrendous

Fixed

[fresh timber]

reinstalling

almsot done

im getting mother mods that are suppose to work with it too

[craggy shoal]

can't wait for the RTX 5005 Ti Super with a 850W TDP

[fresh timber]

nvndia

is

cool

[tall pine]

@idle nexus updating to the new beta version 8.37 fixed the problem.

[craggy shoal]

I only want a 5080

[fresh timber]

then buy it

no car

[craggy shoal]

Car mods first priority and vacation with my girlfriend is second priority

Then new GPU

[fresh timber]

happy gf or happy pc

[craggy shoal]

Happy gf

bro life sucks when she's angry

don't want that

[fresh timber]

skyhook is broken

[rancid juniper]

scripthook you mean

[fresh timber]

yeah

thats

[rancid juniper]

have u updated that?

[fresh timber]

thats broken

i just reinstalled everything

loaded one by one

[rancid juniper]

i say find the latest version of scripthookv

but maybe since the game updated now scripthook doesn't have a compatible version yet

[rancid juniper]

carmaxxing

[fresh timber]

mesing with mods

lol

https://www.reddit.com/r/GTAV_Mods/comments/1cn9r4w/guide_how_to_revert_your_game_without_backing_up/?share_id=zhiXeUW3LLZxRRhARP0Jd&utm_medium=ios_app&utm_name=ioscss&utm_source=share&utm_term=1

ill do this later

[weak cedar]

Govee lights

[lone mango]

Goes hard feel free to screenshot

[hoary zodiac]

gm_microcenter

[last wing]

Yo I just installed some new cooler master halo 120 fans in my pc. I installed 3 to be exact. Currently, on the back of my motherboard I have a hub where everything plugs into and I plugged the fans into it and they turn on and work fine. I am wondering how I can also plug in the rgb. The fans came with a box looking thing that has 3 ports where the rgb cables seem to plug into. There is also a place where you plug in the box thing and the other end is something that you plug into your motherboard im pretty sure. It is long and thin. Like a very flat rectangle
Also how can I adjust my new fan speed? Also this is the first time turning on my pc after adding the new fans and it seems to be running quite a bit slower. It took like 7 seconds for this message to even load

[rancid juniper]

it was today i learned about local network transfers and my goodness

ITS AWESOME

[icy ore]

hmm

[north crescent]

Like transfering files just through two random PCs on the network?

I do remember learning about that, after transfering a lot of data off a PC through a slow ahh USB drive

[rancid juniper]

yea, done it through steam

incredible speeds

[north crescent]

It was actually terrible, transfering like 200(?)gb of data from one PC to another through a slow 32gb USB drive. After like four cycles with some corrupt data, I decided it'd be best to just take the drive out and put it in the other PC. Like a week later I learned about LAN file transfering and I was mildly sad

[rancid juniper]

😔

it do be like that sometimes

[north crescent]

Sadly yee

[tranquil pebble]

gm_newegg

[tall pine]

Lan file transferring? Is that transferring data by connecting two computers via Ethernet?

[north crescent]

PCs typically cant be connected directly via ethernet, but kinda yes. It's making a directory sharable through the local network allowing any PC on the network to access it (with credentials if configured)

Works much like a NAS

[sinful blade]

Your fan speed can be adjusted via software you can install

[frosty sinew]

heh

[misty sparrow]

what a peculiar error

[opaque sedge]

Bruh wth are these prices

Nintendo is so ripping their fanbase off 😭

Looks like its cad but still

[dusk knot]

Holy

[nocturne flicker]

This is not holy

It is evil

[lone mango]

When you are streaming on discord and it crashes at a random time

[proud jackal]

I still haven't bought a single switch game

[lone mango]

Spend 500 to spend another 80 and another 80

[rancid juniper]

average crimes against consumers

[misty sparrow]

if only Nintendo games went down in price over time

[elfin mural]

i will never buy anything from nintendont

i don't want to support a highly litigious company ngl

and i never grew up with anything nintendo anyway

the only consoles i had some experience with were the sony stuff

[misty sparrow]

The Wii was pretty cool

I'd go as far to say it was their best console

[misty sparrow]

what did you grow up with? must've been some pretty neat stuff you had

[elfin mural]

ps2

tho i never owned one

and a psp

also not mine

i just had the opportunity to play on someone's consoles lmao

[misty sparrow]

just went over to a friend's house to play?

on the bright side you or your parents didnt have to shell money on any of that stuff

[idle nexus]

gitgud

[idle nexus]

sorry had to step away suddenly lol

soo for Minecraft modding, sodium isn't the good one anymore?

[acoustic palm]

for shaders its the good one

for modding forge will always be better

[idle nexus]

ah okay

heck I thought those two things were like the same ngl lol

[acoustic palm]

nooooo

sodium is... fine for modding

itll work

[misty sparrow]

apparently sodium is more lightweight

[acoustic palm]

just a lot of mods dont support sodium

[idle nexus]

isn't there another one? heck

[acoustic palm]

curseforge?

uh

[idle nexus]

that sounds right lol

[acoustic palm]

its meh

its basically forge

[idle nexus]

fabric?

[acoustic palm]

ive never really used it though

[acoustic palm]

OH

thats terrible for modding

like no mods support it

[idle nexus]

super old?

[acoustic palm]

no

just not meant for modding

if you want heavy modding forge is the go to

[idle nexus]

I see I see

[acoustic palm]

or whatever the modpack uses

BTW dont use default launcher

use smth like modrinth (easy for custom mods), multimc (easy for mod packs), prism (same as multimc, just didnt work for me)

[idle nexus]

what website do you get mods from usually? I think minecraftshader.com or something lol

[acoustic palm]

i use modrinth for custom mods

or multimc for my gtnh modpack

[idle nexus]

ah okay I'll look for that

[last wing]

yo i just installed some new fans on my pc at the top. 3 to be exact. after i installed them, my pc was much slower than normal. this went away after a few minutes. I turned off my pc and unplugged the new fans that i installed and it was being normal again. my cpu is also around 80 celsius without running much. do i need a new cpu cooler for the cpu temps and for the fans is it something with the motherboard?

[idle nexus]

what CPU cooler?

also, did you remove the cooler?

[acoustic palm]

yeah modrinth is nice, it basically takes github and stuff and (safely) gets mods into an easy to find and install format

you can also easily find shaders, some modpacks, and other stuff

[idle nexus]

I'm on the site rn looking for the launcher lol

[acoustic palm]

get the app

its so nice

[idle nexus]

oh nice

does it put the mods in the correct folder & what not for you?

[acoustic palm]

mhm

[idle nexus]

it's like a mod manager

[acoustic palm]

yeah

[idle nexus]

like Vortex for FO4, etc. from Nexus?

nice

[acoustic palm]

you can choose what instance each mod goes to

lots of filters too

and you can easily update stuff

also if you cant find a mod/shader on here you can custom import it

[idle nexus]

you launch from there too?

[acoustic palm]

yup

[last wing]

right now i have some random air cooler from the company digital storm. i did not remove the cpu cooler

[idle nexus]

you could make the fan curves more aggressive in BIOS

[last wing]

how do i do that

[idle nexus]

some motherboards have programs you can use to control fan speeds in Windows

which motherboard?

[last wing]

im also not sure if bios is actually detecting my new fans. how do i know which one is which

asus b650m-a prime ax ii

[idle nexus]

the fan header you installed them on should be labeled

or if you remember you can look at the manual

[last wing]

on bios it only goes up to fan 3 im pretty sure

and i have 7 excluding the cpu cooler

[idle nexus]

https://www.asus.com/us/motherboards-components/motherboards/prime/prime-b650m-a-ax-ii/helpdesk_manual?model2Name=PRIME-B650M-A-AX-II

[last wing]

thanks

[dense locust]

SOCKET AM5

[acoustic palm]

be careful though, if you mod too much... like dh with high perf settings and shaders... it HITS your pc hard

[idle nexus]

you can either restart the computer & keep pressing delete to get into BIOS or press start & type cmd then run as admin & write the cmd: shutdown /r /fw /t 0

[idle nexus]

besides shaders, what hits hardest?

[dense locust]

Put a random number between 1 and 10000 to gamble

[last wing]

but do you think its an issue if im running not too many things and im at 80 celsius cpu temp

[dense locust]

[dense locust]

Issues with cooling most likely

[acoustic palm]

render distance, resource pack, entity #

[last wing]

and when i run something like ark survival ascended for the first like 20 seconds i have 100% cpu usage and like 95 celsius but after that it goes down to like 70% usuage and like 80 celsius

[idle nexus]

ya 80C is high for not doing much

if you start a game or something, it'll likely throttle very quickly

[last wing]

do you think i just need a new cpu cooler

[idle nexus]

are the fans spinning on the cooler?

[last wing]

yes

[dense locust]

Was this an issue before?

[idle nexus]

that would probably be a good investment

[last wing]

they always are

but not my gpu

[acoustic palm]

is the paste on the cooler spread out good, and is the pressure on it good

[last wing]

i wasnt really checking my temps before lmao

[idle nexus]

ya GPU won't spin unless it starts heating up

[dense locust]

What cooler do you have and what CPU?

[last wing]

i have a ryzen 7 7700x and for the cooler i have no idea because i bought the pc prebuilt from a company called digital storm

i probably shouldnt have done that

they say their builds are really high quality and shit

[idle nexus]

btw if you want to see temps on your PC, this is a great way to https://www.hwinfo.com/download/

[acoustic palm]

they arent

[last wing]

damn

[acoustic palm]

unless you overpay 1500 instead of 400

[last wing]

yo i paid 2.2 bands for my pc

😭

[acoustic palm]

you... you got... so scammed...

holy... wtf...

[last wing]

for an rtx 4070 super

[acoustic palm]

...

my pc was 1300

[last wing]

ryzen 7 7700x 32 gb ddr5 ram 850w power supply

what should i do

[acoustic palm]

nothing you can change now

[last wing]

bought this shit a few months ago

[idle nexus]

btw (anyone feel free to correct me if I'm wrong cuz I'm honestly not too familiar with air coolers) this is a really good air cooler https://www.newegg.com/p/13C-000Y-000M9

[dense locust]

Pretty good

[acoustic palm]

wait...

[last wing]

i have warrenty

[acoustic palm]

is this your ram

[last wing]

i got the 6000 mt/s

[acoustic palm]

ok

[dense locust]

I paid 2.7k for my pc

[last wing]

if possibly should i return that shit

[dense locust]

But I was wasteful for looks

[last wing]

possible*

[dense locust]

[acoustic palm]

yes.

[last wing]

alr and if i cant

[acoustic palm]

you can get a much better pc for cheaper if you build it yourself

[acoustic palm]

then you gotta suck it up and make it work

[last wing]

alr

[acoustic palm]

NOT worse

[misty sparrow]

what'd you put in it?

[acoustic palm]

same

[dense locust]

https://pcpartpicker.com/list/KR4CPJ

Ram is the only thing that’s incorrect

Couldn’t find my specific kit

[acoustic palm]

you got... 10ns... right...

also RIP motherboard

[dense locust]

Cl30 6000 mt/s

[acoustic palm]

ok good

[dense locust]

It boots at 6200 but text won’t display

So I don’t think it likes it

[acoustic palm]

just dont go above

youll lose 1:1 more than likely

[dense locust]

It hasn’t exploded yet

[acoustic palm]

yet

https://tenor.com/view/rigbycat-rigby-cat-tongue-gif-18357263336141773644

[dense locust]

I see way less posts about failures now

[misty sparrow]

did you really get your case in blue

[frigid stag]

Wtf is that gif

[acoustic palm]

https://tenor.com/view/rigbycat-rigby-cat-tongue-gif-18357263336141773644

[last wing]

does bad cpu cooling count as a defective part

or issues with the hardware

[acoustic palm]

as long as you didnt tamper it id argue for that

[last wing]

alr ima go for a bit brb

[misty sparrow]

those hyte cases are real pricey but its worth it for b l u e

[acoustic palm]

view 380xl :

(115$ blue case)

[dense locust]

Do you have to ask

[acoustic palm]

send a pic of the pc

[dense locust]

Want to replace some parts and add parts but it’s good enough for now

[acoustic palm]

im ngl to you

the fans spots not being used... pmo

[dense locust]

I want 3 reverse fans

But the ones I want are expensive

[acoustic palm]

smh

[dense locust]

It’s a $200 case why do you smh for that

[acoustic palm]

smh

do i watch film gold or film red or keep watching rezero

[dense locust]

Watch something good

[acoustic palm]

i just said 3 good things

💔

[dense locust]

I have no idea what gold or red is

Is that a pokemon movie?

[acoustic palm]

one piece movies

[misty sparrow]

why would you watch gold and red film

[acoustic palm]

they good

[dense locust]

Ok then my statement stands

[acoustic palm]

?

[dense locust]

_ _

[acoustic palm]

one piece is arguably the single best piece of fiction to exist

💀

[misty sparrow]

i thought you were talking about watching a gold/red film wheel spin

[acoustic palm]

no

[sinful blade]

Hard pass

It’s good, but not the best

[acoustic palm]

whats better

[misty sparrow]

breaking bad

[dense locust]

Anything else

[acoustic palm]

fam? fair. breaking bad? debatable.

[sinful blade]

Invincible

[acoustic palm]

...

yeah no

💀

its good ill give it that

its not one piece good

[sinful blade]

Doubt

[acoustic palm]

you do realize how POPULAR one piece is

right

[misty sparrow]

dont blame him i dont realize it either

[acoustic palm]

oda is the 6th best selling auther oat

[misty sparrow]

i don't watch anime, did not know that

[dense locust]

I watch anime I didn’t know that

[acoustic palm]

op is the most sold manga oat, its the most pirated show aot

its broken records

[misty sparrow]

what does "oat" and "aot" mean

[dense locust]

Doesn’t mean it’s good

[acoustic palm]

of all time

[dense locust]

Copium

[acoustic palm]

i mispelled it

[dense locust]

Clearly you’re talking about attack on titan

[acoustic palm]

its doing all that while being the best

[dense locust]

Which I also haven’t seen

[misty sparrow]

i know how long one piece has lasted though

[acoustic palm]

that shows amazing, its not better than op though

[misty sparrow]

how have they been going since the 90s and they are not done, hundreds of episodes later

[acoustic palm]

lore, world building

[dense locust]

They prob ran out of ideas decades ago

[misty sparrow]

basically the anime form of grey's anatomy

[acoustic palm]

almost the entire storyline of the show has been done for a very long time

[dense locust]

I’ll rather replay deltarune than watch juan peace

[acoustic palm]

ok

thats great man

you can say its not for you

[misty sparrow]

some shows just need to end

[acoustic palm]

its still an amazing show thats imo the best piece of fiction out there

[dense locust]

It took all that time for you to add “imo”

[acoustic palm]

ok

thats great

[dense locust]

You know what’s great

[misty sparrow]

being alone

[acoustic palm]

no

thats not great

i hope my crush goes out with me

[misty sparrow]

alright so anyway what were you going to say?

the joke went too far

[dense locust]

I was going to also make a joke

Too late now

[misty sparrow]

if something lasts too long doesn't it become stale and repetitive though? unless it's something that is based around current events

[acoustic palm]

how is a ever expanding story repetitive

what

[misty sparrow]

well i've never seen one piece

i just thought, 20+ year running won't it get stale at some point?

there has to be something like that in there

[acoustic palm]

also its very VERY VERY relevant to current events, mainly through coincidence though

[acoustic palm]

its not stale cause theres not too much being repeated

its a story

its not like those shows

its one continuing storyline

[misty sparrow]

so it's not something like family guy or the simpsons where they lost their charm

[acoustic palm]

no

its a story

its not like those type of shows

[misty sparrow]

cool

i wonder how it's related to current events though? how they could accidentally do it

[acoustic palm]

the show is incredibly political

the main thing is bringing down corrupt governments

in one of the newest episodes, the world government was moving down peaceful protesters

so... coincidence but still releveant

[misty sparrow]

to be fair a lot of media uses corrupt organizations and stuff like that too

just for story purposes

[acoustic palm]

the overall message of the show is how bad the governments are

literally

its about freedom

[misty sparrow]

okay i guess a lot of other shows involve fighting for freedom too, not really a political concept there

i guess it could be something else in the show i'm not getting

[acoustic palm]

no no no

its complicated to explain

but the show is incredibly political

id argue more so than star wars

[misty sparrow]

i haven't seen star wars either

[acoustic palm]

wtf

ok at LEAST watch star wars

😭

[misty sparrow]

i lied, only seen the new ones

they were terrible

[acoustic palm]

you didnt lie

💀

those arent actually star wars

[misty sparrow]

i can tell

the director put a lot of twists in the movies that made no sense

[acoustic palm]

the actual 5 star wars movies are amazing

phantom menace is ok

[misty sparrow]

weren't there six?

[acoustic palm]

"1" was "ok"

better than the sequel trilogy but thats a low bar

[misty sparrow]

I didn't know Luke was a major character in star wars because of how they trashed his role in the new films

i thought he was a side character

[acoustic palm]

yeah they sucked

BUT

the films man

[misty sparrow]

seeing him throw his lightsaber away at the start of Last Jedi was bad

[acoustic palm]

the shows were... amazing

andor, mando, boba fett, clone wars, rebels

all amazing

[misty sparrow]

i did see the obiwan tv show

[acoustic palm]

oh yeah that too

[misty sparrow]

it felt like filler that shouldve been a movie

[acoustic palm]

you havent even seen the movies bro

😭

[misty sparrow]

yeah, i know

it felt like some of the episodes were filler though

[novel ferry]

tryx who

[dusk knot]

China

Wow. That looks great

No soo much the fans

[elfin mural]

the screen

god i want one

[hoary zodiac]

Watch Babylon 5

[lone mango]

Yall played peak

This game is so goofy but is challenging

You would think its slop but when you see how challenging it can be, it gets really fun

Also really easy to run but still looks good

I think the lowest I saw with my current proton config was 240 fps and it goes over 300

1440p high

[nocturne flicker]

Peak Peak gameplay

[worthy meteor]

It's so peak to peak peak

[frigid stag]

Titanfall mentioned?

[nocturne flicker]

Nobody fell on Titan

[misty sparrow]

https://tenor.com/view/peak-its-peak-its-so-peak-too-peak-jun-fukamachi-gif-16559357471562151229

[tall pine]

Is being able to do 5.7Ghz on every core for CCD0 (V-Cache) with a negative co good?

With 5.5-5.55Ghz all core for CCD0.

[lone mango]

Yeah thats like +200 oc pbo

[tall pine]

I currently have +200 override with -30 to -35 on all cores for CCD0.

[lone mango]

Nice

[tall pine]

Also it seems in single core loads, all of CCD1 can do 5.8Ghz without a negative offset with core 8 doing 5.95Ghz effective clock.

Hmm VST3 is being a pain. Core 3 Thread 1 does not like the offset in all core.

Temps are around 62-64c.

[worn wave]

The overclockers have breached containment, I repeat: the overclockers have breached containment

[tall pine]

Mohahahbaa

[hoary zodiac]

Hey

this is better than the average general chat convo

[lone mango]

My 9600x goes down to -50 which is insane

I hope this is enough to not kill it

[tall pine]

What you want me to keep logging to myself as I have been doing in #overclocking like the psycho I am?

.

[lone mango]

Brutal

[frigid stag]

Idk go to an overclocking server if you want advice

[tall pine]

In any case although -35 per core to all of CCD0 passes all single core loads unfortunately it does not pass heavy all core loads

So I am currently using VST3 Y-Cruncher to test for which ones need reducing.

[tall pine]

Honestly I am more looking to talk than for advice but I am open to any if you have some.

[lone mango]

I would just slap -30 on all of them and call it

[tall pine]

Also does your 9600X seriously do -50???

[lone mango]

Yeah ryzen master set it to -50, I am sure there is some more headroom but I dont want to push lower as that is already crazy enough

I was expecting like -20

Since I assume it left some headroom with its result I added +200 oc as well

Cracked cores but my iod is brutal

Tech tradeoff moment

[tall pine]

Ryzen Master?

Have you tried setting in bios?

[lone mango]

Yeah I had ryzen master find the best negative offset for me instead of me changing the setting and having the memory retrain each time I make a change to the bios

I didnt want to deal with that so I let ryzen master find it for me and I did something while it was testing the cpu

[tall pine]

Damn well that's a pretty decent tradeoff.

You basically have a 9700X speed wise with better temps.

[lone mango]

Im gonna be pissed if my board kills it

I kinda want to remove the oc and just keep the offset so the voltage is even lower

[tall pine]

Btw VST3 is now passing pretty smoothly. Love the core detection for when things error.

[lone mango]

That is pretty cool

[tall pine]

CCD0 is doing 5.3-5.35Ghz all core.

It was doing 4.95-5Ghz prior to the negative co and override.

[lone mango]

Goes hard

I forgot my all core

But my single core goes is in between 5.6 to 5.7

[tall pine]

I am debating trying BCLK overclocking once I have curve Optimizer and such dialed in.

[lone mango]

In minecraft I saw it peak to just over 5.7 like two times for a really short time

[tall pine]

The fact that it hit that in Minecraft alone is pretty good.

[lone mango]

I was also hosting the server locally

Lmfao

Yeah now that I say this

This is a good cpu

really good