#old-cooling
1 messages · Page 49 of 1
Okay good, cause I got the drp4 and my friend said I wasted my money
Mugen and shadow rock 3 are both especially good if you have RAM that is unusually tall because if heat spreaders/leds
Drp4 is very good, but possibly overkill depending on what you're doing
DRP4 for 3900x+
It's POSSIBLE you wasted some money, but not because it's a low quality cooler
It all depends on what CPU and overclocking, and airflow situation you have
I’m gonna be trying to get a 5900x
what case?
Phanteks P600s
oh do you already have it?
I'm looking at the 5600x for my cpu
front airflow seems... lacking
@twin urchin
stock cooler might be good enough for 5600x, but we dont know yet
its a 65w TDP part tho
so it should be similar to the 3600
Yeah I was gonna use stock for a little bit then once I get some more money swap it out
If 5000 is as hot as 3000 like amd claims, you can get by with a much more cost effective cooler
Like mugen 5, shadow rock 3, or gammaxx 400
I'll take a look
Tyty would you say any of those are better performance wise including the one I linked or is just preference at that point
I have a mugen 5 on an i7-6700 and it keeps it very com and is quiet under full load
They should all be similar. Mugen has 6 heat pipes and larger fins, so theoretically should be one of the best at that price point. But they should all be similar enough
Alright I'll look at them all and do more research on them all
lol cooling peasants, my cooler is only attached on 3 corners
@haughty cedar probably has a 486sx-25 or something that doesn't even need cooling
pretty close
i5 7600k
also my wifi card is duct taped into the case
and my gpu is held in by 1 screw 1/3 of the way screwed in
we've all had builds like that
I'm not sure that counts as being held in
that's what happens when u throw out all of the stuff that came with the case and then suddenly need to work on it 3 years down the line
also 12gb of ram, not 16 or 8
I am just realizing how much of a disaster my computer is
its a corsair 220t, i have a 2070 super from asus rog and the corsair vengece pro rgb memory
Why do you want an aio
for mostly statics
statics?
lmao
aios don't provide much more performance
I'd just get a better air cooler than stock
can u recomend a dark air??
sure
thx
Arctic freezer 34
https://www.amazon.com/dp/B07MJGNJB3
give me a local retailer then
I'll go look
@crisp wedge like this
https://www.terabyteshop.com.br/produto/9741/cooler-master-hyper-212-rr-212tk-16pr-r1-black-intelamd
link it if you can then
oh
It's not
@polar shell yell at them that they spent 50$ extra for basically no performance
and also tell them
if pump fails, or it starts leaking, they can laugh all they want >:D
it just looks better thats really all
heh
Looks are preference
Gimme a sec
it actually is really good performing
Check this out on @Newegg: Thermaltake UX100 5V Motherboard Sync High Airflow Hydraulic Bearing ARGB Lighting CPU Cooler https://www.newegg.com/thermaltake-ux100-argb-lighting-cl-p064-al12sw-a/p/N82E16835106593?Item=N82E16835106593&Source=socialshare&cm_mmc=snc-social-_-sr-_-35-106-593-_-11022020
Clearly this one
gammaxx 400 equivalent afaik
bruh
ononono that cooler tho
i meant a nice looking cooler that actually works ;-;
looks like an intel stock cooler on lsd
Gammaxx GT is equivalent to Gammaxx 400 afaik
is what I was talking about
and I really like the performance gammaxx 400 offers at it's price point
oh no, i just realised ive been sending amazon links
instead of newegg links
i forgot where i was
AAAAA
No wait, this is the best looking with all that copper
Check this out on @Newegg: ZALMAN CNPS9500 AT 2 Ball CPU Cooling Fan/Heatsink https://www.newegg.com/zalman-amd-am4-not-compatible-cnps9500-at/p/N82E16835118003?Item=9SIABW985Z3663&Source=socialshare&cm_mmc=snc-social-_-sr-_-9SIABW985Z3663-_-11022020
maaaaaaaaaaaate...
why
is
it
33$
AND WHY DOES IT HAVE 120 REVIEWS
WITH 5 EGGS
mostly 2011
Those heat pipes are impressive though tbh
Drp4 looks sweet
Check this out on @Newegg: ZALMAN CNPS9900ALED 120mm 2 Ball Low-noise Blue LED CPU Cooler https://www.newegg.com/zalman-cnps9500-at-amd-am4-not-compatible/p/13C-0007-001K2?Item=9SIAM9MBCD2815&Source=socialshare&cm_mmc=snc-social-_-sr-_-9SIAM9MBCD2815-_-11022020
More copper insanity
Man, early 2010s were a crazy time to be messing with your CPU cooling
good time to cut your fingers
But in all seriousness, this one is pretty cool.
White shadow rock 3
Check this out on @Newegg: be quiet! Shadow Rock 3 White, CPU cooler, 190W TDP, decoupled silent Shadow Wings 2 120mm PWM high-speed fan, asymmetrical construction avoids blocking memory slots https://www.newegg.com/be-quiet-shadow-rock-3-white-air-cooler-series/p/13C-001F-00056?Item=9SIA68VBZF7681&Source=socialshare&cm_mmc=snc-social-_-sr-_-9SIA68VBZF7681-_-11022020
Finally available apparently
Wait, I thought the fan needed RGB to make the CPU run faster though?
Is that just for looks on the be quiet one
Nice
Things chonky
That one is my second fav after mugen 5
Hey what’s a good cpu cooler between 50 and 100$
For what cpu
Ryzen 7 3700X
Drp4 is amazing, but might be overkill for you
Nice
Hey what’s a good cpu cooler between 50 and 100$
@woeful galleon fuma 2 dope
Also great
i have a intel core i7 9700k, what cpu cooler should i get?
ok, how expensive are they
Are you overclocking?
k-series have an unlocked multiplier so why not 😉
If you're overclocking you will probably want a fairly beefy cooler or an AIO
ok
For air-cooling a few friends of mine have had some success with the Noctua NH-D15, which is in that 80-100 bracket.
For slightly more you can probably get a 240mm AIO from a fairly trustworthy brand
I use a Corsair AIO, it's overkill for my needs though
i haven't bought my cpu yet but was just thinking about it cause it was on sale at microcenter, otherwise i was going to get the ryzen 5 3600 becuase i am on a budget and i was just going to use the stock cooler
so i don't want something very expensive
ok
There are, but I couldn't vouch for some of the cheaper ones, and in tests the air-coolers sometimes beat them
not used any of cooler master's AIOs
Fair enough 🙂
not an aio
☝️
i only rly do hw and play val and minecraft
Great budget option is a Gammaxx 400
do u have it
25$
it's better than it looks
I don't, but TPU has
https://www.tomshardware.com/reviews/deepcool-gammaxx-400-slim-tower-cpu-cooler,4460-2.html
that's super cheap 👍
ok, thank you
Is it worth paying $65 more inorder to have a i7 9700k other than a ryzen 5 3600
I'd say no
3600 is nice
is it worth paying another $20 for overclocking
as in if I was choosing between the two I'd go for the 3600
nno
3600x is not worth it
not even for overclocking
it's a 200mhz higher clock
barely higher bin
ok, it is just on sale at microcenter for $200
maybe go i7 if its only 265
its only 200 at microcenter
the i7?
if you grabbed the R5 3600 you've got room to upgrade if you feel under powered when the 5000 series comes out
or the Ryzen?
i don't think that i will upgrade anytime soon
yes, the i7 is only $200 at microcenter
definetely get the i7 then
ok, it would cost me around $75 more
what mobo do you have currently
i haven't bought any yet
i7 is better deal in this case
but i was looking at asus prime b550m-a (wifi)\
and for intel i am looking at asus tuf z390-pro
i was planning on just using stock coooler for ryzen
but for intel i would want to use a different cooler
yea
wraith spire vs wraith stealth?
oh?
i would rather use the amd stock
the gamma 400
i have a wraith prism
I bet you it beats prism
It beats a NH-U12s for gods sake
@half parcel you want to say Tom's hardware lies?
https://www.tomshardware.com/reviews/deepcool-gammaxx-400-slim-tower-cpu-cooler,4460-2.html
I mean
if you don't want to trust tom's hardware
you do you
whatever u say
I mean, you agreed that it gets better temps, end of story.
Lmao
xD
Is any water cooling system with fans aio
@silent panther many options out there but what size would you want the rad to be
What do you mean by cooling system like another AIO or an air cool systen
Like is any product like that aio
Just the fans and rad with water cooling
Is that aio like it cools the cpu and the rest of the pc
With water cooling of course
It cools the CPU thats the reason for an AIO they dont cool your GPU specifically
Basically my question is if any water cooler that has fans on it that cool the area around it aio
Btw aio is all in one right
An all in one is the Rad fans and the block
Wait what
You can buy the rad fan and block separately AIO (all in one) comes with it all in one
Oh u didn’t know that
I
idk autocorrect does u instead of i
Wait so do aio coolers fill only the cpu
Or do they also cool the rest of the pc
Chill not fill
Aios are for the CPU specifically but they do pull some air into the system
You would need anorher fan for your exhaust
Depends on your cpu but most people go with 240s
They are large enough to cool i9s and stuff and also are pretty compact and fit in your top of your case if you have fan slots thete
240s are cleaper but grt one from a more well known brand
You can get a Corsair 240 for around 80-100
Never heard of the brand that you sent
Or does rgb always mean red green blue
Low iq in my part sorry
Rgb means red green blue but using software you can change the values so
255,0,0 would be red
Ok
Is this case: https://pcpartpicker.com/product/gfn8TW/cooler-master-masterbox-td500-mesh-white-w-controller-atx-mid-tower-case-mcb-d500d-wgnn-s01 plus three 120mm fans good
Reference: Radeon 6800XT and Ryzen 5600X
Yea a 240 should be fine
Seems to be a spot in the top. So have 3 120s in the front. And a 240 AIO in the top with an exhaust in the back
Wait how many fans can you fit on the back cuz the case comes with 3 front fans
Or in other places
can anyone link me the best performing 280 aio?
Yo arctic doing work
does anyone know out of these 3 coolers which one is best and by how much
nzxt kraken z73
Corsair iCUE H150i ELITE CAPELLIX
Asus ROG STRIX LC 360 RGB white
depends what ur looking for if its rgb then asus
if its amazing cooling then nzxt
if its a bit of both then corsair
so out of the 3 the best cooling is the nzxt 1
yea
thank you
but they are all preety good
ok any suggestions on case / cpu fans for this AMD Ryzen 5 3600X
there are so many
stock cooler is actually sufficient if you don't want to spend extra money
thanks
does anyone know out of these 3 coolers which one is best and by how much
@random jacinth none of the above
ok any suggestions on case / cpu fans for this AMD Ryzen 5 3600X
@north nexus stock cooler
Recommendations for cooler for Ryzen 7 5800x
Mugen 5 /Shadow Rock 3
this is assuming it ACTUALLY has the same power usage as the 3800 like AMD claims
but there's no benchmarks out yet so who knows
yes, unless you want to do some crazy OC'ing
or if you have a terrible case with no airflow
P400a is the case
that should be fine
@midnight crypt the stock cooler is not working well and the cpu is over heating
what case do you have?
Cooler Master MasterBox Q300L MicroATX Mini Tower Case
it shouldnt be overheating lol
you sure you didnt wipe half the paste off by accident
im sure
then youre doing smthing wrong
thought so
its the game i think cause it only has problems with watch dogs 2
i think it is
when you say overheating, what is the actual temperature?
yeah send temps
that case doesn't have great airflow though
but it should still be good enough for a 3600
it was like 40-50
yea the cpu was the problem
75 isn’t bad though
75 isn't a problem
for CPU
whatever your problem is, its not overheating
how old is your power supply?
lol 75 is fine
no need to fuss over it
80-85+ is when you worry
90 is when you panic
thanks for the help
@north nexus ❤️
what type of water cooler should i get. Im currently using a ryzen 7 2700x with stock cooler but i wanna up grade soon but im on a budget. what should i get?
don't get a water cooler if you're on a budget
go for Gammaxx 400, Mugen 5, or shadow rock 3, all for under $50
I’m partial to the be quiet! coolers
then shadow rock 3
If you want a fancy looking one, try the gammax gt, that’s what I’m using in my 1700$ build (CAD)
are the Shadow Wings 2 120mm good case fans?
not an aio
Air cooling
tho I wonder what aios Demonmit1 uses for budget builds
I feel like I remember seeing one
Rosewill 240mm AIO?
i hv air cooling
lemme check
anyway you don't need water cooling
DEEPCOOL Castle 360EX or Corsair iCUE H150i RGB PRO XT
NZXT Kraken X73 for just 14$ more?
NZXT Kraken X73 for just 14$ more?
@elder talon please no
get a arctic liquid freezer, or a deep cool
dont bither with corsair or kraken aios lmfao
dont bither with corsair or kraken aios lmfao
@midnight crypt
why tho?
thought the were good
the kraken ones
nzxt kraken uses asetek, which has horrible fin density already
pairing it with bad nzxt fans makes it worse
similar story with corsair
they use coolit instead
fin density and material is better, but still need improvement
still horrible fans
lmfao
Air cooling
any good case fans for recommendation?
been looking at these but idk cooling that well
Never heard of the bionix line, but Arctic usually makes good stuff
I'm a fan of scythe fans if you like the black and gray look. Move a lot of air and very quiet
Not expensive either
I'll look at them
I just found those because of the 34 duo cpu cooler uses the bionix fans on it
What's the right AM4 mounting kit for an nhd-15 ?
Is there any point to adding the 3rd fan to the drp4?
probably not
@exotic jay It comes with the cooler
You don't need an additional mounting kit
I have a NH-D15 :P
So putting a PC in a fridge wouldnt work bc of condensation but what about running a radiator into a fridge? 🤔
i mean, same problem bc of condensation off the radiator, but if you would run it along the side then i think it would be fine
cool the ambient temp of the inside air of the case
In general it just seems that external radiators would be better
yeah, the biggest concern is noise, style, and dust collection tho
hello, I wanted to ask if is there a good cpu cooler that blows the air in the motherboard direction like the stocks ones
but better than for example, the writh prism, the one that come with the ryzens 7 and 9
yes
does your case have a top fan mount and rear fan mount?
better question, are you looking for cooling or airflow?
I read that they can cool the ram and and the vrm
what case do you have?
h510
but I don't like those bulky cpu coolers
and in the future I will buy water cooling, but meanwhile I want something decent
that's a good question, those cases offer two front mounts, a top, and a rear, so personally i can imagine that just using a fan on the cpu, one outtake on the top and one intake on the rear would be fine, and two outtakes on the front
@azure crown what are your thoughts, wants slim style cooling on an h510
no water cooling or large cpu cooler
water cooling doesnt have to be like a custom loop, aios are super easy to work with
and not very expensive
h510 bad case tho
if you already own one then its fine
but there are muuuuch better cases out there
I just want something momentary, to save money to buy a nzxt kraken in the future
hyper 212 to the rescue
Gammaxx 400 @ashen dock :D
And no
don't buy a NZXT Kraken
either stay on the Gammaxx 400, get a Noctua cooler, or an Arctic freezer ii
or Dark Rock Pro 4 or something similar in the middle there
Dark rock pro 4 is great for me
Are there AIOs for GPUs?
kind of
yeah, there are but imo kinda janky and not too worth it unless youre running an older gpu for hours on end
it's a 3090 kinpin what'd you expect lel
most people that'd buy a kinpin would do ln2 anyways
or at least do chilled, and not just use it normally
ek aio
for cpu fans any good brands to look for


@north nexus generally, model matters more than brand
unless it's Noctua
Noctua is 
any model recomedations on models
What budget
does under 100 dollar im looking for the ryzen 5000
I refer you to this
#cases-psu-and-cooling message
Gammaxx 400 at 25$
Mugen 5 rev b at 50$
Scythe Fuma 2 at 70$
NH-D15/DRP4 at 90-100$.
Arctic freezer ii 360mm at 120$
this
yes
Which Ryzen 5000?
you have all the information in front of you
ok
Which Ryzen 5000?
the 5900
I’d recommend the higher end of that list then
that makes sense
I have the drp4 and I like it a lot, but I’ve also heard amazing things about the nh d15
why at Arctic freezer ii 360mm that size or is it any
yep
@north nexus it's crazy good performance
The 280mm version can best NZXT 360mm aios
Look at GNs review on it
So I watched the video about cooling you recommended from them
Ngl it was kinda boring
@lament oak ye, I said 1.25x speed or 1.5x speed for a reason
they go through a lot of info
and fluff
I started 1.25, went to 1.5
They definitely put in the work though
Any other particular videos?
hm?
Oh that one was just really good information and good to know for CPU cooler testing and all
@lament oak They also did videos on Nvidia reflex and stuff, I think this section of this video (Latency terminology) is a good section to watch. The rest you could skip around to see summary
https://youtu.be/0SZ7ZCac38A?t=1063
This video serves a referential deep-dive for our future total system latency (we're coining "TSL") testing methodology, including NVIDIA Latency Analyzer/Reflex validation and LDAT testing.
Sponsor: Teamgroup T-Force Vulcan 1TB SSD (Amazon: https://geni.us/vIKHLE)
The GN Tea...
they also did a GPU testing terminology video, but that's mostly going over stuff that's similar to the CPU testing video, and some cool tech they got.
otherwise their stuff is more specific, as in specific case reviews, card reviews, etc.
Sweet, thanks
I like to watch their hw news recap for news.
In hardware news this week, the Intel Iris Xe Max GPUs get detailing, we revisit some confusion about AMD RX 6000 Rage Mode, Smart Access Memory, & "DLSS," and talk Rocket Lake-S.
Sponsor: Linode Hosting - get $100 credit with GN (https://geni.us/UaKrUmF)
GN Bar Runner Bar Ma...
Got a lot of time to kill waiting for zen 3
So this’ll be good to pass the time
mhm
I'm using my time finding monitors and case fans
I can not decide for the Scythe fuma 2 ($59), the Mugen 5 Rev.B ($46) or Arctic 34 esports duo ($48)
If you can buy a Fuma 2, buy a Fuma 2.
If you got extra room in the budget and it fits that is.
:)
anyone able to tell me if the rgb will be covered in a p400a with the nzxt rgb fans?
what
looking at getting a kraken and changing the fans to the rgb ones
will the ring on the nzxt fans be covered in a p400a case?
I want to get a kraken and change the fans to the rgb ones
As in will the rgb not be visible
are the deepcool cf120 fans any good?
they seem to be
good reviews
not really unless you are planning on doing high cpu intensive tasks over a long period of time or extreme overclocking
that noctua nh-u12s beats a lot of good aio's
dont forget aesthetic
Noctua beats bad AIOs
Great AIOs beat traditional heatsinks ofc, it's just a bigger slab
also the aio will need to be changed after 3-5 years and noctua will outlast all the other parts, but an aio does look nicer, takes up less space over the cpu and can be quieter depending on the fans on the rad
well those are the 2 best of their class
NH-D15s is good at 90$
because second fan on normal D15 can cause ram clearance issues
they are both great options
Oh wait
I forgot
NH-U12a
it's a NH-D15 except doesn't have clearance issues
It's a smaller thing that gets similar perf to NH-D15 without being chonky and blocking things
so yeah like the best aio vs the best air cooler its a toss up
I mean ram height clearance
a h500 mesh and deciding between a nh-u12a and liquid freeze ii its like he doesnt need our help....
those are all excellent choices
I am usually talking people down from crazy things
right?
i’m thinking of getting a kraken
why
point and case
"ah kraken 150$ overpriced blah blah get freezer ii for 100$ blah blah air cooling good blah blah"
LOL
i’m confused
its because your not in here everyday
explain
You should feel good that you're getting stumped by something that makes sense either way
I joined like 2 days ago too lol
@pliant gale this is literally the rundown of what I would tell you
#old-cooling message
typed the whole thing too many times tbh
yeah the freezer ii outperforms the kraken and costs less
well I didnt know it was others say it is good
I know more about the software side of things
I know little about hardware I understand that I have a decent system though
Then what's not clear about freezer ii being better :P
from their 360mm aio showdown
from their freezer ii review
from ek-aio review
anyways point is
its always a good idea to go to gamers nexus and youtube channel and search any part you are thinking about buying. I do it. He's way more technical than I will ever be.
GN likes freezer ii
they like it so much they used it for the #ripjay OCing competition thing
part of it comes to looks thats kinda ugly
and 2 degrees isn’t that big of a deal to me when I have a 3600x if I had a higher end cpu i’d prob do it or get a custom loop
I do personally have the evga one but the freezer didnt exist yet and it does sync its light with my gpu
should i go for the 240mm arctic aio or the 360mm
Depends on cpu, budget, case support, etc.
i’d want to get the aio that syncs to my gpu but its too much for a name
the evga one was getting good reviews when I got mine and I happened to have an evga card also
Yeah get the 240 one @topaz blaze
Da case ain't gonna support a 360mil
But what are you going for an matx mobo?
it will too support a 360 rad
You can spend 15-20$ more and get an excellent ATX one
it will too support a 360 rad
Wait it will?
the h500?
I'm getting p360a :3
Aight
only if you feel the need for synchronized rgb
^^^
I got a 3080 strix
TD500 mesh supports top 360mm
H500 supports front 360mm afaik
but dual 200mm looks so nice
so 240mm top is nice still
buying my gpu was the fastest I spent 900 lmao
that was with tax and shipping
I like em
buying my gpu was the fastest I spent 900 lmao
Wow 200$ premium
$150 plus $50 tax
Oh yeah the strix
It is a nice case
strix is same price as master but performs better and I think it performs better than xtreme or both are on par
but xtreme is $900
I wish someone would do an in-depth review of the strix card though hard to believe no big youtuber has it
anyone know where i can get amd brackets and plate for a coolermaster seidon? the round one...the one i got is such low usage i hate to buy a whole new cooler just for amd brackets and plate
gah, thanks...why didn't that come up for me? i've been typing siedon and bracket into everything lol
again, much thx!
sweet
@midnight crypt just cause it had good review and has been used in many builds before. Also if you want to know i would do top exhaust in an o11 dynamic foe aio with side and bottom intakes
only need one fan tbh
the rest is just benefit
or if you place them in conflict with each other, detriment
lolnerd
hehehehhee hooohohoooho nerd
wasting all the wind with all those fans
save the wind for other computers so they don't choke
how do u not get warned for swearing
yet i literally get kicked if i swear cus of my other infractions
lol
weggbot slippin again
wow
I think the bot has a set list of words so if there's any word that it doesn't know it passes
ugh hopefully 2 days aquatuning will finally send out my gpu block for my 3090
msi ventus what i could hands on w/ good deal and alphacool only one who has a block made w/backplate
its good paste
Anyone tried be quiet! Pure loop aio? Don't see any much review on it
I saw that someone did a video with it to test a 5900x
Bitwit?
But not an extensive review
Yeah. I just watched that. And I found out that this aio is not that expensive. Cheaper than Arctic liquid cooler ii that I'm thinking to get.
best low budget AIO? 50-100$
sweet thanks man
if I'm working on cable managing a build and want to reseat the aio (x63) and it has pre applied thermal paste is it okay to just lift it and put it back down without any sort of reapplication?
how long since it was first applied?
So a 3600x. Stock cooler work well enough? Or should I grab some other cheap cooler?
stock works fine
stock is good enough, but some people complain about how loud it is
if you want a quiet one there are several very quiet ones available for below $50
What was the $30 one Mr1111 recommended?
Bruh what? The be quiet pure rock and shadow rock are the same price right now
Gammaxx 400
So the scythe mugen 5 and shadow rock 3 are the same price. 2 questions: 1- which is better and 2- would it work for a 5800x?
Sweet, thanks
This is a bit of a mix between cooling and cases but I'll ask it here:
My case is a Phanteks p300 and I have three fans for it (one stock and two arctic 120mm.) At the moment I have the stock fan for exhaust and the two arctics as intakes at the front. Is there a better way to use these three fans?
for three fans, probably not
doesnt it come with more stock fans?
Hey, I have this RTX 2070 Super card right, but it sounds like a jet engine when I play literally any game.
I've been thinking of ways to cool it down and my main idea at the moment is to switch to a water cooling block, is this the only way?
Regardless I've been wanting to play around with custom loops and hardline tubing for awhile, I just haven't quite gotten there and I'd rather avoid doing so until I have the money to replace parts worst case scenario lmao
So I bought the new Be Quiet! Pure Loop 360, and I just wanna say, it's pretty phenomenal
anyone able to help with a cooling problem im havigg? in vc
New egg lian li fans are back in stock
It's good
swag
guys i have a question
i have a cooler
big one
and that support that u have to put on cpu thing broke
then i lost it
can i put it any other way
Reason: Bad word usage
not really you need all the brackets
not really you need all the brackets
@kind apex you understood worng
wrong
i ahve all the pieces
Reason: Bad word usage
is it just a silly tool to help put it in or cover the socket when there isnt a cpu there?
"and that support that u have to put on cpu thing broke" not terribly descriptive
ima search
and give u photo
something like this
but mine is diff
and
like
it jsut broke
the plastic broke and now it loose
should i try gluing it back?
I dont think so it needs to have good pressure so it makes contact with the cpu
if that thing is loose everything will be loose
not loose in that way
loose in the way that the plastic broken and it needs to be glued
only if you can make it as tight with the glue as it would have been without
that is unfortunately the one part of the pc you cant damage
that and the pins on the cpu
it has to be a perfect seal and I feel like gluing is not going acheive that
it has to be a perfect seal and I feel like gluing is not going acheive that
@kind apex Should i try at least?
you can try just turn it off if the cpu gets real toasty
and how do I know if that happends
use like cpuz or something to check temps once started and dont do anything intensive like run a game or stress test until you see where temps are
just idle it should be ok for a while with no cooler
possibly but you need to have something other than bios going to heat the cpu up to find out
like windows
HWiNFO64
for temps
my first pc
not prebuilt
i put another cooler
it wasnt making contact god
good
and i went on bios
the bios got so laggy xD
you need to stop breaking coolers lol
how do you break a cooler lol
just out of curiousity how did you break the bracket
you need to stop breaking coolers lol
@kind apex will it glue correctly if i use glue gun ,and put it upside down and press down on it
just out of curiousity how did you break the bracket
@kind apex it all started with not reading the manual
beacuse i was the rookie of the rookie
I dont really know since I havent actually seen the part or the break
I dont really know since I havent actually seen the part or the break
@kind apex if i do that it will be perfectly straight
that sounds right
you know maybe it doesnt show temps
I hate the stock cooler
What’s a good value cooling setup for clocking the AMD 3400g processor on the Asus gaming board?
stock cooler
Guys, can anyone link some decent thermal for repasting - My G7 7790 runs hot, i've tried doing some Throttlestop stuff to reduce temps etc but there's so many variations of settings online and it's impossible to know exactly what's the 'ideal'
arctic MX-4
@toxic narwhal MX-4 or NT-H2 are both solid options
NT-H2 comes with cleaning wipes which is nice :D
Anyone know if I can transfer a hybrid 980ti kit (it’s broken) to a 1080? Paid $90 for the broken card as a shelf prop, thought maybe I could use the cooler?
Whats a good cooler for a 1366 board?
I'm trying to get the best cooling solution for my new build im gonna be doing. Im rocking a 5800x, and hopefully i can get my hands on a 6800xt, it's unlikely tho. If not I'm gonna try to get a discount on a 2080 super. I do wanna go water cooling and I already have a master box 520 as a case so keeping with cooler master would be ideal
anyone know what would be ideal?
I know, its wrong to use the stock intel cooler. But temps are scary atm
Just caped out at 59c in bios
@rare cypress and what cpu is that?
I7 920
get a proper cooler
I know, but what should i go for?
alphacool sucks there inventory shipment is worse than gpu's
Im looking at AIO's
and 59c still leaves you about 7-8c of headroom
i would personally just go with a big chunk of a air cooler
Now its bouncing at 59.5 and 59c
and that part is normal @rare cypress
In bios?
yes
yes, the 920 is a hell muffin of heat creation
depending on how serious you are about running that old hunk of silicon
I feel like they should just stop including coolers ;-;
you could go with a noctua cooler
Are they good?
its not worth it imo
cooler wise, the cheapest (actually decent solution) would be to search for a used cooler
there should be plenty of them around with 1366 support
Above is being helped in #building-and-recc-chat
like asking about this?
https://www.youtube.com/watch?v=BbGomv195sk
A lot of PC builds online (including manufacturer photos & NR200P builds) incorrectly mount AIO liquid coolers, leading to pump noise/whine and early cooler failure.
Sponsor: Buy Thermal Grizzly Conductonaut on Amazon (https://geni.us/1D8Eeq) or Hydronaut paste (https://geni.u...
yes
The main takeaway is don't let the pump be the highest point in the loop
no, it's rather to not have the air be in the pump. The right image is also bad because of that, just as the left image
yes, pump being the highest point in the loop = air in the pump
is it better to run the pump at 100% constantly or set a curve? mixed results from google
Well... I feel like that very much depends on how loud you want your system to be
Can someone please help me
you know the drill @spice sapphire
ask, and someone will help if they know the answer/want to help.
I have my fan curve set to the highest before I really start to hear it, then at 70-75 ish I ramp it up to 100 until it hits the 80s
I don’t have enough headers for the fans I have
Fan splitter
What is that
Y splitter
Yeye I know lmao
My fans come with that I think
then use that :)
They are the mf120 cooler master fans
@twilit abyss right now i have it set to a really low curve for quiet but some people say that variable pump speed shortens its lifespan
and that does not matter for this @spice sapphire
the 2 nearest to the camera are RGB plugs
the only one that is needed for the fan itself is the 3rd one
have some patience
Well is the answer yes or no
the answer is you can wait until i or someone else has free time to answer you
Alrighty then
He’s moving between like 5 different channels at once answering people ;-;
Also, no
Those are 3 different cables
Two of them have to do with rgb
Yes
How many fab headers does your mobo have
That’s a sheety mobo
A single fan hub
@spice sapphire there are not any semi-modern mainboards that i can think of, that have just 1 fan connector
i see 2 on the first
are you counting cpu fan header
fan header = any header that can drive a fan :)
ah ok i thought you meant 1 case fan header
nope, if i meant that, i would have said so :)
I’m guessing that’s what cash is taking about tho
until @spice sapphire actually starts talking, we dont know.
1 case fan header is enough for the kind of components you should be putting on those boards anyways
1 case header with the right connection is enough for a LOT of fans
as in, 20+ no problem
NA-FC1 :D
Are there even non-custom cases that support 20+ fans?
that little piece of overengineered bs that is the NA-FC1 being the reason for that
not in recent memory @twilit abyss
there used to be some "box/cube" cases that had support for that kind of fan number
There are full towers that can fit ~14 that aren't too rare.
mind, those cases cost about 400usd
without fans
10+ years ago
so heck knows what they would cost now
does anyone know if it's possible to set fan curves based on gpu temperature? speedfan didn't work for me
@viral fjord You can use MSI afterburner I believe, I use the GPUTweak 2
sorry i meant case fan curves based on gpu temp
msi afterburner only controls the fans of the gpu itself
should have clarified mb
I have no idea about that then, sorry
@viral fjord there is always the jank way of just getting a splitter from the GPU fan header into case fans. If you go that route (which I doubt you will, but might as well mention) tho, probs get a splitter that can get a power input from the PSU (SATA/molex or smth) cuz GPU fan headers might be built to fan spec to the T, meaning only supported like 0.6A output or smth.
I have just stumbled upon this from ~8 years ago, and I want it now.
https://www.youtube.com/watch?v=-atLQYr14zI
First working prototype of a Noctua NF-F12 120mm fan with integrated RotoSub Active Noise Cancellation (ANC) technology running at 2500rpm. The development goal is to achieve a broadband sound signature that sounds more agreeable to the human ear and a similar overall sound pr...
@low pumice they are still working on it, which is good
@magic sparrow they said that 4 years ago
Yea
Tho that's nice Noctua has been commenting back for the past 4 years for a 8 year old video
Also i guess there was smth like that a while back, maybe? havent looked at the product yet
Hope it's still ongoing, and not just turning people away
Hm?
I saw a review of the gentle typhoon once, seemed decent but not compatible with nf-a12x25
also looking into it it doesnt seem to have an ANC feature
Hm
But taking 8 years to get something from prototype to market does sound like Noctua xD
Yea
and Noctua said they were waiting on that being finished
Arctic freezer ii
Is Arctic liquid freezer ii 360 tubes long enough to reach the cpu in Phanteks p500A case if mounted on the front with fans as intake and tubes down like what Steve, GamerNexus, said?
I have been looking for answer and so far only saw one with 280 rad instead.
I want my cpu to be cooler
Arctic liquid freezer 360
Is best as exhaust
With p500a
And yes it will be enouh
why is it best as exhaust? because of the radiator size?



