#cases-psu-and-cooling
1 messages · Page 63 of 1
thx, and all good man
That vert mount is an extra $30
oof, plus the riser cable
dang the cable management area also looks nice
Riser/cable mount is $30
NOt bad IMO
It comes with pre-installed velcro straps
It honestly doesn't get much better for $100!
(plus $30 for the GPu mount)
im getting the gpu last anyways so ill worry about the add ons when that comes around
thx so much for the help
YW
Better cable management than mine 😅
i bought a case with a back glass side panel, cant wait to put my back cable management to the test lmao
that ssd bothers me lol
yeah lmfao
My old Crucial that's still kicking
its like samsung samsung crucial
all my crucials died :((
i have my last mx500 in my laptop rn
would drop 1% every 3 days lol
in drive health

That MX500 256 gb still kicking
m500
*M550
it's so tiny
smol
meant for embedded systes
system
s
i think HP ssds bang and i kinda want one
i think its funny that their own stuff doesnt use hp ssds most of the time tho
is a non modular psu an actual problem or just an annoyance when cable managing
Annoyance
just an annoyance
but its a pretty big annoyance tbh
That is non modular
nice
I had already order my psu and my friend pointed out it was non modular so I wanted to know if it was a big deal
yeah it's just annoying and aesthetically displeasing to some
occasionally see stuff like that referred to as "ketchup and mustard" cables
I have questions
So i am trying to power a system quick and easy
I cam across this dell psu that seems to have standard connections but just want to make sure no proprietary weirdness
Does this look normal?
Ok so I just got this PSU and it came with a combo deal for the rtx 3070
and i'm really worried about plugging it into my pc
If possible, don't use it
whats like the worst thing that could happen
uhhhh
Reason: Bad word usage
I can't refund it without refunding the rtx 3070 too
Reason: Bad word usage
its bad tho nobody would buy it
reddit hardware swap
i could probably sell it for a hundred or something
OfferUp, etc
Yeah
you should easily be able to sell at MSRP or $10 less then MSRP as BNIB
Reason: Bad word usage
Reason: Too many infractions
F
how can newegg get away with selling a psu that's clearly malfunctional
They just sell whatever. Better question, why can large companies manufacture and sell dumb products and nobody says much.
either way, can still be used for a cheap PC on a good power source (like UPS or smth)
Tbh resellers (Amazon/Newegg/etc) get too much blame for manufacturer problems
yeah well its gigabyte
@elfin trout just want to make sure the psu i posted before is standard power
Because i rlly need to power this system and i rlly don’t want to buy something
@edgy tiger just look up a pinout and look at the shape of each pin
Looks like it's standard or close to it
But too lazy, mobile hard
Thank
what would be the best case under 50$ in terms of looks?
DIYPC IDX1 sometimes goes for 50
this one looks pretty nice, although its tiny, so psu needs ot be short and gpu

looks like a rosewill FBM-X2 rebrand
just with glass front and side and RGB fans
which, i know youve worked in the FBM-X2 before, so you know how it be
@willow hollow
cable management is suprisingly good but that psu clearance is wack
yeah...
damn, even custom cables :0
its a rebrand of the rosewill case
like, the inside is the exact same
only difference is glass and fans
yep aha
because idk how psu'll fit
if that ones not for you a quick Newegg DIYPC search is nice
you might be able to remove hdd cage
lemme see
nope you cant
have an FBM-X2 in right now, so
yea im looking at diypc ones
couple open box ones that look ok but I'm a bit scared lol
dont want a visible scratch lol
Understandable for a flip
Rebranded IDX1
Same situation as the gamdias/Rosewill. Same internals, different front panel
they just made the front cover different
yea
looks decent, might grab it and throw in a couple cheap fans in there
it does look like a lot less airflow
It is
No problem, hope you like it
:))
i have a 10$ off newegg code
because i apparently havent bought anything from wegg in a while
lol
true
all my purchases have been direct paypal purchases so i think its like come back pls
hmm
i might have jebaited newegg
for 1 whole dollar
lmao
would there be anything necessarily wrong with using a psu way above my system's draw
It can decrease the life span of the PSU or it can trigger the ocp and turn off your system.
What wattage unit and parts do you have?
running 3700x/rtx 2060 atm, wanted to upgrade psu to be ready for 5800x or better and 3080
Oh yeah, @hearty pasture, get a new PSU. What’s your budget?
Does anyone know a mid-tower case that’s good in airflow and looks good cuz I can’t pick on my own
Phanteks P500A is my favorite
I’m like thinking so much but I can’t pick one so I wanna see if any of you guys have like suggestions
TD500 mesh, P400a, P500a, Lancool ii mesh
Coolermaster H500
those are all the good ~100$ cases
For ~60$, you can have neo air, mx330-g air, or maybe p300a
Ok guys I need help
500W L05757-800 is the powersupply I need to upgrade my gpu
I need it cheap as possible if someone can find one
get adapters
it what
oem trash pc @elfin trout
Ye
I need to upgrade to 500w
To use a rx580
If that’s the case then my 650w will work fine
I don't think there are any
OEM PSUs are usually one-use, as in, one single wattage psu with a special connector
Tg01-0023w
🤦🏻♂️
It's not cheap though
I mean, just put the part number into google man
L05757-800 original HP Desktop-PC power supply 500 Watt,Partnumber: L05757-800
Official HP site for genuine HP parts and Compaq parts. Search through thousands of replacement parts for HP printers, and HP and Compaq computers.
from hp
almost like you have an internet connection and can google the part number lol

@scenic lance
50-100 dollars range, and a 8pin cpu connector
You like coil whine? 👀
Bro I'm clowning around. What I'm getting at is I'll sell my EVGA Super Nova 750w G5 80+ Gold Modular for $50 cuz coil whine and I don't want to hold onto it
I mean, a new PSU for $50 isn't something I'd consider for sure
Minimum $75 for a decent one
Ye
$130 for coil whine - _-
Oh yeah
Yknow how I swapped my mobo because I hear coil whine though all my USB ports, and no cable change or PSU change solved the issue either? I still have the problem when GPU is under load.
I just run an optical from my mobo to my dac now so the issue is partially resolved. No more loud whining through my headphones
Interesting
Any new ideas how this is happening?
Gigabyte RTX 3080 Gaming OC
Either it developed coil whine or had it and was overshadowed by the PSU at the time
honestly hard to ay
The whine is from the coils literally vibrating at super high frequencies
I didn't know a coil whine PSU can damage a GPU
Well, the coils vibrating is from current/voltage fluctuating at high frequencies
So, yeah, it can happen.
It SHOULDN'T
Utter bs that companies find this defect acceptable for distribution
They don't test for everything
Still gonna buy an EVGA RTX 3080 FTW3 Hybrid so selling my Gaming OC for $700 will be easy
That's just lazy then
What’s your CPU + GPU? A Corsair CX550 would be great for your system
Just we might be able to get away with cheaper depending on your wattage needs
Xeon e3-1280 v3 and RX 570/580, the gpu not confirm yet but its either one of the 2
What about cooler master elite V3 P600?
@hearty pasture that power supply isn’t a good model.
The Corsair CX450 is cheap right now. It’s a good model, but be aware it only has one 6+2 pin GPU connector.
That’s probably the best value power supply on the lower end. You can get an EVGA 450/500 BR for ~$5-10 more, but they’re a significant step down in quality. They do have 2 6+2 pin connectors though.
A CX450 would be able to power an RX 580, 570, GTX 970, and similar well, as long as it doesn’t use 2 GPU connectors
Ok bro got it, thanks for the suggestion
I NEED CASE COSMOSE AND POWER FSP 1600 W
is this good for X8DAi? https://pcpartpicker.com/product/GYGkcf/rosewill-power-supply-rbr1000m
lots of fine sub 75 units
~60+$ gets you into the good PSUs (like sg-g), and 45$ for cx450, otherwise I don't think there's anything good that cheap
@quasi kraken That's not what I said lol. I know there are good units under $75 depending on wattage. We were talking about 650W units. Always good to know context before random tagging.

Not a good psu unless you drop more than 150 on it
Bruh moment
Herro!
Can anyone answer a question about a pre-built PC I am looking at purchasing?
I want to know if I can easily add a 3.5" HDD to this case. There is no specific information on the case so I want to make sure before I order it.
@scenic lance the case used in that build is the Rosewill S500, and that case has 3x 3.5” drive bays and 7 2.5” drive bays, so, you can definitely fit a 3.5” HDD in there
Good luck with your upgrade!
THANK YOU!!
No problem
@vocal talon is that NR200P :DDD
no thats a usps medium box
usps been slow lately why someone make usps build
opinion
hey guys i have an important question
will a 600w coolermaster elite v3 (75% efficiency) run my i3 10100 and gtx 1660 super safely?
:/ i've already bought it.. i just wanna know tho do i have to upgrade the psu then?
or will it run for a couple of months
It's not the wattage that's the issue
ik
Super low quality PSU
i will upgrade it in a couple of months, i just want to know if its good enough
ahem yes terrible PSU coughs awkwardly who would buy that cough
totally cough dont have one in my ITX build sniff
i just want to know, will it not blow up in 3/4 months?
it has 3 year warranty, if running temporarily you should be fine
ive seen people use worse on more power hungry components
cough kenzie N1 + 5700 XT 
yeah my pc is a pc you can entirely configurate on a prebuilt website, you get like a 3 year warranty for the whole pc
Reason: Bad word usage
just make sure theres no power surges or anything, cause those could end ur PCs life
you know what, because it has such a good warranty, i won't give a f$%*
kenzies issues are because they were omega dumy
bad mindset lul
and the rest of your pc wont dummy
psu can kill other PC components
yeah but its a FULL pc warranty
not the PSU warranty
-_-
didn't you read the messages above?
because i have a full 3 year pc warranty, i dont need to care if it explodes
everything can get replaced ez
I mean, you obviouslyt don't care because you have a warranty so buy it
oh you got a prebuilt
sry thought u knew how to build and were saying CM would replace the whole pc
nzxt h1 goes

So does the gigabyte PSU

Anyone here know what this big slot on my case is for? I have a dvd writer on the slot above.
mostly optical drives up there afaik
Just shove a raspberry pi in it, that is pretty much it besides gimmicky stuff, optical drives or a small drawer
cup holder 
Oh yeah, do the cup holder 
ODD.
You could put a small metal tray and use it to heat up food by running cinebench over and over
get the airflow version and it should be fine I think
@tender rapids yep
Its one of my alltime favorites
All the little details make it a joy to build with
Oof
Yeah i do like the meshify to
Hard choice between D and Mesh
They are very stubby lol
The fractal cases just look odd from a side angle
Noctua announced white fans
For 2021
On their roadmap thing
In q3
Yeah they are pretty good abt that
You could always use redux ones, kinda close
Ooh
I am in LOVE w noctua
I just worship them... I admit to fanboying
I bought the hoodie and the goodie bag and now my apartment is plastered with noctua goodies
Oh yea
Too bad arctic is so good
They always burst my fanboy bubble
Must be nice
I just cheap out and use included mostly
But if i had a lot of money
Niice
Noctua is so old now that i have found dump pcs with noctua fans
Always a score
Yeah, thats a good idea
But the feeing of unboxing noctua fans... they make you feel like a king
I use ali mostly
Aliexpress has some bang-on deals
The snowman coolers are 
ali legit as hell tbh
i use them for clothes a lot lol
they have hella harajuku stuff
yea
Really
11$ not bad
And better than a CM hyper 212
W RGB bling that sells
For that sweet sweet hustle

Stocked up on strips
static rgb is so funny
Does anyone know if the PSU basement of corsair 4000d is supposed to have a "lid"? There's an empty space between the 2nd fan and third fan slot and it's bugging me cause i can see into the back of the case
good day. Seeking advice. Got a corsair 4000D airflow and would like to know what are some great budget friendly case fans and configurations for them? Should note my climate is hot all year and this pc is situated in a non ac room.
Noctua
arctic
Arctic p12
@daring marsh smh scythe kaze or whatever usually the price of nf-a12x25 anyways
any specific models in noctua or any would be fine?
well whats your budget
Nf-a12x25s optimal
also I'm seeing pwm and non pwm
does all the fans need to be pwm? or just some
Pwm means there's a 4th header that the fan can communicate it's speeds with the motherboard
^
budget i'm looking at less than 20usd per fan
but if i have no choice i'll increase the budget
Yea, Arctic P12s prob, they're like 30-40$ for a 5 pack
pwm is just convenient
Well, it's time to introduce you to PST maybe
none only the cpu fan left
hm splitters then
Iirc the PST fans let you daisy chain
Check that though
If it does, great, daisy chain em, if not, a few splitters
oh ok thanks so look into pst fans or get a splitter noted so i could mix 3pin fans with 4pin ones in that situation?
3 pin and 4 pin fan headers you can mix
Only thing is less fine control on 3pin fans, but they'll still be fine
ok cool thanks alot appreciate it
a lot of fan packs and AIOs come with splitters
nice
Poll: RGB Lighting good or bad?
No
why ?
Why why?
Why why no why?
Reason: Bad word usage
oopsy
I like how rgb looks but after doing it in one build my next one's gonna be all be quiet or noctua or something
you got milk ?
oh lol so there's an arctic p12 pack existing
but ngl i could use still just use an arctic p14 pwm intake then 1 p12 pwm exhaust
could still b viable right?
a not good case into another not good case
no
they need drive bays
so many other cases come with drive bays 
Most all
im tryn to make a home server for the cheap to run games such as minecraft, what is the cheapest power supply i would be able to get, im not gonna run anything stronger than a ryzen 5 1600af
https://www.newegg.com/segotep-gp-series-600w-non-modular/p/1HU-00Z0-00008?Description=segotep 600 watt&cm_re=segotep_600 watt-_-9SIAM7KB3V6506-_-Product Pretty much the cheapest recommendable unit
At it's price point for an LLC DC DC unit with fairly good quality internals i wouldnt go below it pricewise
not worth the increase in liability
Next step up is the montech i think. Not the beta the other one. Good unit too fairly cheap.
Century iirc?
does this look like a knockoff design of other known brand?
What’s a highly known unit that performs most similar to this? Just so I can get a gauge of how good it is
Like an EVGA or Corsair one or something
Corsair CX (non-m) would be the closest
Ooh nice!
CXM is worse than regular CX
I know
epic
hello everyone need some help I have a MUSETEX ATX (903N4), the fan controller died, fans work RGB does not. was working fine for about 2 weeks. New egg is telling me i would have to return the whole case to get a new controller which i am not about to do so does anyone know of a controller i can buy? fans have 5 pins from what i can tell.
Hei posted the PSU Tier list in Build Chat and by popular request, it's here now!! https://linustechtips.com/main/topic/1116640-psu-tier-list-40/
PSU Tier List 4.0 rev. 14.6 Last Update: 29-11-2020 Gray - EoL / obsolete. Generally not recommended for purchase since its going to be pre-owned, refurbished or old stock. Green - small form-factor (gold and blue colors are disregarded due to scarcity of SFX PSUs) Gold - best units in the tier (...
make sure to do your research, list isnt always 100% accurate - aka it is not the be all and end all solution
Nope. but it's a good quick and dirty for newbies.
Gigabyte?
Mine’s c but it’s hangin in there
yea, p-gm
That's because it literally blew up during a review
😳
Publicly announced also. https://linustechtips.com/topic/1274705-gigabyte-gp-pgm-shorting-on-main-fets-what-now/
notice: this does NOT affect GP-APGM/Aorus PGM units. This is the same OEM, but different components and main design has been used here. GP-PGM GP-APGM Summary Gigabytes recently announced unit has an issue, where the OPP is set too high, causing the main FETs to explode because of it being unabl...
dang
is the corsair 275r airflow good?
my psu has two 8 pin connectors but only came with one 8 pin to 2x 6+2 pin cable, i need to use both 8 pin connectors for my 3080 but i read using other brands cables can be bad
not sure what to do
amazon has a silverstone cable that says compatible with all PSU's on the packaging
but that could mean all of their PSU's
Who'd you get the PSU from?
its the Thermaltake sp-850ah3ccb
Dollars to donuts if you contact them they'd send you one for free if it's new.
maybe even if it's not
thats a possibility but im picking up my 3080 on sunday and want to start using it right away lol
its either use the silverstone cable or buy a new psu lol
its cause its an old version of that PSU, the new ones come with enough cables 😦
Well, if it's an older unit I'd recommend replacement anyway
Those power supplies weren't very good to start with and with age comes less power output
well its from 2012 lol, and who knows how long before that
my 5 year old TT power supply was dropping from 12V to 11.3 on the 12volt line under GPU load
Dear lord do not use lol
ok good to know
i was only gonna use it cause my new one isnt enough wattage, good thing i talked to you lol
yeh i had that fear before looking into anything else too
IDK where you want to buy one from but a Corsair RM, Superflower Leadex, Phanteks AMP or Seasonic Focus Gold is recommended
i can check the two biggest pc stores in canada since im going to a big city to pick up my 3080
750W is fine also
If it's one of those
3080's have issues with low quality power supplies. This is a quick and dirty list you can check while in store
Just PSU info only and what GPU only for reference. OK Here is the list so far. As of 12/14/20 - Check the list before adding your PSU, if it's not on the list already post it. ASUS Thor 850ASUS Thor 1200ASUS ROG STRIX White 850 Bequiet Dark Power Pro 1000Bequiet Dark Power Pro ...
yeh i was looking at 850w, probs should just get 750 to save some money
didnt expect to have to spend more anyways
I'll bet
I didn't either until I checked my PSU voltage with my GPU under load
Another $100 lol
they are like $150 here
pretty much just the conversion
unless ur in canada as well and got a good deal lol
No, I'm in the states
Phanteks AMP 750 for $109
NOt sure if you can get those in Canada though
its a matter of what these two stores have in general and what they have in stock on sunday
should be able to find a good one though
Ye
There also another list pinned to this channel
Quite comprehensive
I'd recommend Tier A or Tier B
PSU Tier List 4.0 rev. 14.6 Last Update: 29-11-2020 Gray - EoL / obsolete. Generally not recommended for purchase since its going to be pre-owned, refurbished or old stock. Green - small form-factor (gold and blue colors are disregarded due to scarcity of SFX PSUs) Gold - best units in the tier (...
Sweet!
My power supply has 16 AWG eatx and pci cables, is that problematic for a 90 strix / 5950x / dark hero build?
Since there are other PSU's like the seasonic that has 18 AWG cables
Depends on the length
the PSU I'm using is the rm1000i
I thought you said it was a thermaltake?
psu? no
I have the RM100i
why'd you say thermaltake lol
where did I say thermaltake lol
lol
LMAO thought you were the same person talking
I have a corsair RM1000i for a strix 3090 / 5950x / dark hero build that I intend to overclock
Yea?
I mean, 16 gauge is better
Wires are thicker
carry more current
Typically the larger the PSU wattage the thicker the wires
16 is better than 18?
Yes
Thicker wire
WIth wire gauge, the smaller the number the bigger the wire
Like, ethernet wire is 28 gauge or something
ohhh
It's backwards LOL
wait, so 16 is actually a larger wire. I'm a dumbass
Ah, it's OK
I need to go to bed too
XD
the word placement is confusing on this to me, where do you plug in the 8 pin CPU?
Ye
6 pin are Peripheral/SATA
thanks
yes then the two 8 pins underneath the big one ill use for the gpu
sure!
theres a 10 pin connector on the mobo? the only ones that connect to the PSU are the 8 pin and 24 pin
that i see
idk what the 10 pin is for exactly
Part of the 24 pin motherboard cable
ohh
YW
Hey! I was wondering if there was a case I can put my MSI MPG Trident 3 10th in? just go to conns . com and search MSI MPG Trident 3 10th (TRIDENT3001) those are the specs and everything
Please ping me, so ik you sent me a message
Seasonic 750w semi modular 80 plus gold , what do you think
Good, but i have had problems with it. I was probably just unlucky but still
yo does anyone know if the GIGABYTE P850GM 80 w gold psu is a good enough psu? I haven't really had any experience with gigabyte
am I stupid or is that a joke
YW
hopefully mine doesnt 
Check this out on @Newegg: GIGABYTE P650B GP-P650B 650W Intel Form Factor ATX 12V v2.31 80 PLUS BRONZE Certified Non-Modular Active PFC (>0.9 typical) PFC Power Supply https://www.newegg.com/gigabyte-gp-p650b-650w/p/N82E16817233020?Item=N82E16817233020&Source=socialshare&cm_mmc=snc-social-_-sr-_-17-233-020-_-01282021
Anyone know how reliable this psu is
Cause if its any good I can get it for a trade
Hey! I was wondering if there was a case I can put my MSI MPG Trident 3 10th in? just go to conns . com and search MSI MPG Trident 3 10th (TRIDENT3001) those are the specs and everything
Not really, no. That's a custom board designed specifically for that case. It has a 90 degree right angle PCI-E connector and other custom features that won't let it go in another case.
Ok then, how much can you upgrade it?
10700/2060 is the best you can do. External power supply plus custom BIOS
Can you upgrade the graphics card and processor?
Only to a 10700 CPU and a 2060 GPU. Might need to upgrade the power supply also depending on which one you have.
Even then it has to be a TINY 2060 like this
So your telling me it is impossible to put it in a case?
unless you want to custom make your own case.....it's a custom motherboard designed specifically for that case. Not impossible but I doubt you're going to find a case to buy and just pop it in.
has a right angle PCI-E connector
And a custom motherboard that's not really a standard form factor
Ok, whats the best website for PC parts? ill just get a new pc
Use PCPartpicker.com to put it together. it'll pull the best prices from a few places
Ok
GIGABYTE - GeForce RTX 3070 GAMING OC 8G GDDR6 PCI Express 4.0 Graphics Card Black
Does this have display port?
Its from best buy
Yes
@opal night check your DMs
There we go
The 212 needs to be changed to something else. it's honestly a bad cooler lol. Gammax 400 or ID cooling SSE224.
Ok change the cpu cooler
Also, the NZXT case has pretty poor airflow
And I'd recommend a WD Blue hard drive
The Seagates have a really high failure rate
What do I clean the tempered glass panel with? Please ping me
glass cleaner? @torpid urchin
I was about to
But I looked it up before and for example windex has a lot of alcohol and i had read alcohol can harm/wear tempered glass
To clean tempered glass, use a mild, non-abrasive glass cleaner. Spray a little on a lint-free cloth and gently rub the glass clean. Use another clean, lint-free cloth to buff the tempered glass surface dry. You can also use a solution of lukewarm water and mild dish soap to clean the glass. Remember to rinse the soapy residue off the glass if you use dish soap.
woah, mod assist looks so much darker now
i always thought it was like a pale peach
but its like, fairly orange
If you're short on budget, 550w is good enough. 650w is nice tho
Used a NeoEco Gold 550w on a 3060 Ti and i5-10400. Works fine
That's a quality PSU though. I wouldn't try the same thing on a low end model lol
does anybody know what fans come stock in the lian li lancool - II ? i want to order some but want them to match
i need to see psu review of it
lol it also lacks a warranty
pretty sure someone will do a review within 1 week like 100% sure

also why change name from storage to hdd queen 
because i rly dont care too much about ssds
same way i do about hdd
wait i think i cant say that
all better 
lol
Ah yes, finally, a single psu that can run sli 3090s
Yes, platitum is premium rating for 90 plus, trust the platitum, be the platitum, platitum is love, platitum is life
Seriously though, I dunno how that can get any more sus 
@scenic lance would go w the TD
The h500 series has a rough and confusing family tree
And the td is more popular
most preferred but not 100% necessary up to you just some peoiple dont want to take the chance of overheating anything so im sure they put it for good measure as am i
u
yea thats what i told myself as well lol
@scenic lance don't get td500 non-mesh
H500 no suffix is actually pretty good
Td500 mesh is great
corsair rmx 850 good and if not will be so kind to tell me a good one
I vote H500. i have one and love it. you have to like the 200mm fan look tho
rule is basically more exhaust is negative
more intake is positive
@scenic lance
u have all exhaust
so thats negative
oh wait nvm
ur front is intake right
you would probably be postitive
ur layout is fine
how good is the montech air x? it seems pretty solid but idk
it has good airflow but it doesnt even have rad support
and the cable management is eh
i would go with another case
what is the price on the motech one?
air x is usually around $70
sorry i was busy
will you be using an AiO or air cooling for the CPU?
I would go with a single 120 in the rear and a single 140 in top-rear
That's what I have in that case
A second 140 will take cool air away before it can be used to cool the CPU
Does anyone know if EVGA W1 PSUs come with black cables now? There’s one with all black in #build-pics and one with all black i see for sale, is that new or something? I googled it and can’t find any results
can someone find me a good case with 3-4 fans (RGB preferred) around $55-70$.
@woeful juniper this case is an option for $55. 4 fans, 3 RGB.
Be aware, it has not good airflow, though.
Thermaltake Level 20 MT Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 3 120mm ARGB 5V Motherboard Sync RGB Fans +1 120mm Rear Fan Pre-Installed CA-1M7-00M1WN-00, Black https://www.amazon.com/dp/B07LCMR3JC/ref=cm_sw_r_cp_api_glt_fabc_DMJ8SVEHDHPAWQWX1NZE
i saw this but read the reviews and said not good airflow
oh sorry i didnt realize
But for that budget it’s gonna be hard to get all those fans
true
Phanteks P500A /thread
Ah, right
I remember now
Not weird, unique
Decks has issues
The whole subjective thing kinda goes over their head
So get it if it will work for you
They get too hung up on some things
that's all
Hot glue a 5.25 chassis to the side of the case 
what do you guys think of a Corsair Obsidian Series 500D case for a build?
no airflow = not recommended
Can someone help me decide where to put exhaust and intake for my case
How about bottom
Does this side face outward if I want exhaust
that is the side that draws air in
Damn I gotta redo my exhaust
the other side of the fan should have like a plastic X over it or something like that
computer fans always blow out that side
Nope is just has the model number and stuff like that
right, with plastic bracing going toward the outside
Aiiii
ADATA XPG CORE Reactor 750Watt 80 Plus Gold Certified Fully Modular Power Supply (COREREACTOR750G-BKCUS)
@dusk pasture well, some people like it but xpg is generally sketchy. Go with a corsair or evga PSU instead
Well the company just is sketchy
...
I mean is there no reason NOT to tell everyone buying new to just go corsair or evga
Price
The reactor isn’t amazingly priced
ADATA is a bit sketchy on the drive side with their swapping of nand and controller, but not their PSUs
@edgy tiger that's in cad
So
If so, then why don't we all spend 400$ on a AX1600i? It's Corsair, it's good.
Well I didn’t say just any corsair
There are a lot of corsair models and honestly most are outstanding
If I can get the same quality in a cheaper PSU, I'd go for the cheaper psu to have more money for the rest of the system
Hell, now that I think about it, core reactor might actually have better warranty than say a RM
BTw the egva supernova is same rated and 30 dollars less USD
What why are you saying its cad
@edgy tiger have you even clicked on the link this discussion is about yet :p
135cad
I am talking to flarion
Yes, flareon is talking about the XPG core reactor in the link.
Which is 135cad
For I'd say same quality as RMx
Yes, but this ain't about freedom dollars
If it's freedom dollars, get a Phanteks amp for 110$
Or a Revolution d.f. 850w for 120$
And there's no reason to get a g3 750w when those exist with correctly set protections
a cdn EVGA 750bq is 20$ less
im not getting it
the page wouldnt load for me
so i figured out what the link was so i pasted the name
since it doesnt show a preview
And also less quality. Tier C instead of A
EVGA PSU's honestly arent that great
Other than the g2/p2/t2 stuff, the rest aren't great
yea, i was just suprised by how cheap it was, and didnt think it was the same PSU as in the list
Yup, it is
evga makes a lot of mediocre psus
heck you can screw up buying corsair too
CX vs CXM lol
Lol
850W
I remember wanting to buy a psu and only seeing cxm in stock I wanted cx so bad
i was thinking 1600w
1200w
1000 would be comfy
i wouldnt wanna under do it
Gold/plat
higher rating = more efficiency which means it pulls slightly less current to power your stuff
White white white

all of the good ones have some kind of 80 plus rating on them, it's not as important as where it is in the tier list
ok
is there a good white case with enough stock fans so it wont fry itself? (2 200mm intake, 1exhaust) (3 120mm 1 exhuast, whatever)
P400A
P400a white, although I don't like the looks of it
Guys I got a lian li 0-11 and it only came with 3 stand off screws
You can get away with that
Just do it on 2 corners on the far side and in the middle on the IO side
Boom, sturdy ATX
HI there ty for any help with this matter,,I have asus GT301 case, and wondering dO I really need a new PSu ? Asking bc manual for case mentioned : from rgb controller >connect to power supply > sata connector, does that require a specific 'type' of new psu,,if so would this be enough: https://www.newegg.com/gamdias-kratos-p1-750g-750w/p/N82E16817311010
hi btw ;
SATA power = hard drive power, every PSU has it
moderator
ok ty vintage
well I asked bc the 'connector' shown in manual doesn't look like anything my current psu has
slightly older greenwatts 500watts psu
rgb connector that is
Sata power connectors have been around for a long time, PSU should have it
ok ty:__ appreciate it
ahhhh gotcha,,lol yup, I'd just never seen a rgb connector before so it threw me
awesome ;-0
ty again
yw
Is the 5000D AIRFLOW Corsair case a good case for a higher spec build?
case has nothing to do with performance
so
as far as specs are concerned, any case will do
as far as thermals go, its probably a fine case
I was more concerned with the thermals
Can't have 2 hard drives in a case with only one bay
Anyone have a good alternative for the NZXT H1? My prebuilt got cancelled today after about a week in pending status. Also, don't really want to burn down my house...
@sick comet what are you looking for, just a prebuilt, or does it have to be small form factor?
The original plan was to get the H1, replace the mobo with a MSI z490I Unify, CPU with the 10900K, RAM with 64GB of C.Skill Trident Z and m.2 SSD with a 2TB samsung 970 EVO
Then take the Original 990k, GigaByte z390I Aorus, RAM, and m.2 SSD and put it in the Node 202 as a gaming PC for my wife that she could use on the TV (She's a pretty casual gamer)
(Those original parts coming from the H1 prebuilt)
I'd like for it to be a SFF since I'm coming from a PC I built 9 years ago that's in a huge case
yeah, the PCIe riser can short out
if just reusing parts it should be fine
Gamers Nexus has been covering that, demanding they recall the risers
this is pretty good value in terms of prebuilts for the specs
https://www.newegg.com/abs-ali469/p/N82E16883360054
but not sff
Yeah, that's about what I was looking at price-wise for the H1. Looks like getting prebuilts are the only way to get a GPU without making yourself crazy hitting F5 when stock gets released...
Sadly
But ABS does offer fairly good value relative to other prebuilts for getting GPUs
Still seems so wasteful, the hope was another prebuilt mini-ITX build that I could part out and use all the parts in the wife's build
I mean, iirc origin had some, but pretty damn overpriced, is ATX just not an option?
Origin is always overpriced, but they have great support
Like their stock config for their SFX PC, 10400+3060ti, costs ~2000$, when ABS offers that same config, except ATX, for 1250$
@sick comet it would also be an option to just strip everything from smth like this, extract the GPU for your build, and put the rest in your wife's build, maybe needing a new motherboard, but not that wasteful imo, could always resell case
Best thing about Origin is they can ship in a wooden crate, nice novelty
tryna think if anyone else offers itx prebuilts
Yeah, looking at Origin now
I mean, there's always getting a NUC xDDD
It'd be kinda fun gaming on a fanless system xD
I think they offered a 2060 version
tbh, @sick comet , best option in general would still probably be trying to get a card yourself and building yourself, but I'll try to update you if I find any other ITX prebuilts.
Side note, I like the NR200p as an ITX case, it's a nice lil case that might be worth looking at.
THanks, looking a t cyberpowerpc's EVO mini right now
And I'll check out the NR200 too
Yea, saw that, the case looks a bit sus tho
but if I'm not using that case, might be worth it
dunno, it has a hot box look imo
other than that, maybe worth it.
@sick comet alright, 2 more companies to look at, Maingear and Omen, Maingear pricing don't look so good, but quality should be solid
tho the omen 25l looks like it only has out of date configs, sadly, but yea
It does have 3070 as best gpu it offers
but cpu wise, only last gen ryzen
But for 1500$, it gets you a 3600+3070 in a 25L case, not too shabby
well the H1 prebuilts were still running 9900ks so 🤷
and yea, omen is hp
That should be all the major prebuilt manufacturers that make itx prebuilts, I might come back to ping ya again if I find anything new
ok, thanks for the help!
:)
i wanted to ask this to anyone who wants to talk about it, but what in your mind is a weird case? Like a milk crate case(as the name implies) or even actual cases that can be bought.
Cardboard
pizza box
If you need help finding an SFF case standalone that suits your needs, let me know.
I'm down for any suggestions, I'm guessing you read what I'm trying to accomplish?
that gives me 2010 vibes
More like 2003-05
Some crazy cases out there
Honestly back in ‘17 ( i was like 10 so i was dumb) but i just went after any case with a million drive bays
So i could just put anything there
And I thought it was SOO cool
The amount of floppy drives you can stick in a case
Lol, I have a really old floppy drive in my case still. It's not hooked up or anything but I think it's cool. It was in my very first PC a 386 IBM PS/2
I could actually use a floppy drive, I built a retro gaming computer for my wife at Christmas, and it was a pain getting Windows 98 installer to boot without an A drive.
It's the 5 1/4 drive, don't think WIN98 came on that 😄
No just the boot disk for the installer, it's not picky as long as it has at least 1.2 MB of storage
I ended up doing a network boot to get the installer going, huge pain in the butt
oof, I've had to do that with a couple of old servers I've got. painful is right
@edgy tiger I just saw that dragon case on amzn and threw up a little
looks like mall ninja sh*t
ATTN: NZXT H1 OWNERS!!! This is a safety issue. If you have this product, please discontinue use of the PCI-E riser, even if you have a 'fixed' case.
OK so I haven't posted in a while, but I was watching some tech news; NZXT is doing a 'formal recall' now for the H1 cases, due to the fires caused in the PCI-E riser and the screw attaching it shorting to ground. It may still present danger even with the nylon 'fix' screws from the first recall. This is an additional recall.
Please contact NZXT support via their website for more information. If your case is already registered, you may receive an email from support (if not, go ahead and contact support anyways).
This IS a safety hazard and can include all sorts of bad things including shorting various components out, smoking liberalously, and causing a FIRE that can spread to your home (not just a little one, it'll get fed by the plastic of the riser and will VERY quickly grow, this is bad and produces many carcinogens like any burning plastic). If your using such a machine and it catches fire, evacuate and dial 911 (or, if you don't mind some possible serious burns and smoke inhalation, remove all plugs as quickly as possible and then take the machine outside - try to hold breath while doing so and hold the machine by the bottom, beware that dripping, burning, melting liquid burning plastic though). Attempting to put the fire out yourself with water while it's plugged in is VERY VERY BAD and may cause electrocution (which can cause serious bodily injury or death), make sure to pull wall power first if you're that daring.
A chemical / electrical fire extinguisher is best in this scenario, so I'd make sure to get one (quickly) if you are using this case with the PCI-E riser...
I am sure many folks have heard about this, but after GN's coverage NZXT is doing a formal recall now. Hooray for Tech Jesus doing the right thing and putting the fire to NZXT for once.
For those who wish to look up coverage, you can view this safe-for work video here (SFW) https://www.youtube.com/watch?v=ZnDWxiFvUtE
NZXT has responded to the NZXT H1 PCIe riser case fire and direct short from 12V to GND. The company has plans pertaining to PCIe risers, formal recalls, and its longer-term future.
Sponsor: Buy Thermal Grizzly Conductonaut on Amazon (https://geni.us/1D8Eeq) or Hydronaut paste (https://geni.us/Fsray)
NZXT has done a lot well here and deserves c...
Wet wash cloths also help to put out small fires just MAKE SURE to pull the wall power plug out of the thing first. Power + Water = ouch/death/bad things/etc. If you do go a 'put it out with water in some way after unplugging it' keep all power removed and remove motherboard battery immediately until the thing has had a week to dry out.
I've run out of the house with a burning battery backup unit in my hands (I chucked it in the middle of the driveway), it thankfully didn't even burn the carpet, but my at-the-time-current Pentium 4 machine was never quite the same after that fiasco of it blowing up. Hope no one has to go through that.
Just didn't wish anyone to have their computer burn down on them. --Good luck
smh
fire go brrrr
Can anyone suggest my a case that has a disk drive slot, a power supply shroud, can support 5+ fans and is at least 8 1/4" wide?
interesting width requirement, what's the reason?
@primal prairie disk drive slot as in 3.5in? 2.5in? maybe even 5.25in?
Probs 5.25 so I can out disks in it
CD drive
HAF XB will definitely fit the width and 5.25in requirement
https://www.newegg.com/black-cooler-master-haf-series-atx-desktop/p/N82E16811119265
uh what
Massive*
What heatsink
A sycth ninja 5
Yeah
that's like 6 inch
But it just barely fits in my case that's 8 inches
I was really damn confused about that width requirement
Of 8 1/4
@primal prairie My case that's 8 inches fits a NH-D15, a cooler that's 165mm tall
just say the height of the cooler to avoid confusion :P
Yeah😅
Fractal has a number of very well made cases that have optical disc drive bays. You can use a 5.25 > 3.5" adapter if you need to go even further back into history.
I use the heck out of them here. Sometimes you can find them used locally, and cheaply at that, if you have the means to go pick it up.
Is there a link?
Yea, define cases might make sense, but they typically have them on the inside where it's harder to access it seems?
Fractal design, google it please. My internet is rubbish / dumpster fire satellite.
I have a Define XL full tower, has a door, sound deadening, 4x optical drive bays with e-z pull covers, and a swing out secondary door with the dust screen, it's REALLY easy to clean.
Define 7 for example, it looks like the 5.25in bays are just inside?
I have an air cooled 3950x with a Noctua NH D15 S (off-set model, same size as regular NH D15, but with a single fan and off-set to not block the GPU slot).
Right now my disk player is sitting proped up on the top of my case with the side panel off

