#cases-psu-and-cooling
1 messages · Page 58 of 1
that extra 2 dangling.. wouldn't that go into the adapter?? sorry if asking too many questions..
I want PSU stock, not GPU stock! 😠
https://ca.pcpartpicker.com/list/7znBGq may someone look my build and explain the compatibility notes to me o.o"
Should I get a noctua cpu cooler or just stick with my amd prism wraith cooler ?
basically since that board doesn't have any 3.2 gen 2 usb headers, you won't be able to use the usb-c on the case
i think that there's adapters that turn 3.2 gen 2 into 3.0, but you'll be limited to 3.0 speeds
Hm.. i see
Does anyone have any experience painting or reskining a case?
i do not
jayz2cents did a video about painting an NZXT H1 i think
https://www.newegg.com/seasonic-focus-650-gold-ssr-650fm-650w/p/N82E16817151202?Item=N82E16817151202 this should be amazing right or is there something better around the same price
are u talking about there rog 850w psu?
the one with no screen
oh that was from an earlier discussion about some cables.... not the rog 850w psu...
850watt vs 750watt for a 5900 with a 3080. What’s y’all opinions, is it worth the 20 or so extra bucks? I’ve gotten about equal voicing for both sides.
Technically, a 750 works, but is it enough to escape random shutdowns?
I've been doing a 5800 with an over locked 3080 on a platinum 750. I haven't had problems, under load I draw about 500w.
I think technically 750 for me makes sense, but I kinda wish I got higher for upgradability and also so the fan doesn't turn on as often
CPU Ryzen 5 3500x
GPU GTX 1650
Storage seagate barracuda 1tb hdd
optional storage 480gb kingstone ssd
Motherboard Placa Madre Asus Prime B450m-a/ Socket Am4/ Amd B450/ Ddr4
Power supply Evga Gd 600w - 80+ Plus Gold Certified
Ram ddr4 8gb 2400mhz hyper x fury black (x2)
Case Aerocool Cylon Black RGB, Vidrio Templado (tempered glass)
would the psu be fine if its 500w
instead of 600w
@warm lark generally yes. But keep in mind, Model of psu matters
that would be okay @warm lark
ok so everything's compatible?
aye, dont see a problem from my end
alr ty
you are very welcome :)
Hello, I have a 550W PSU rn and i7-4790k which eats up to 180W and then I'll buy 1660 super/ti card with ~120w, so in total up to 350W. The question is, do I need another PSU like a 650W+?
you dont
@tender root on 12v+ line will it hold up?
aye, should be fine
as long as it has the pci-e power cable needed for the GPU, then all should be well
the 1660 aint that hungry a card power wise
@hot wigeon see above
oh ok, thx
you are very welcome
@tender root sry for bothering again, do u know something about Xilence PSUs?
which Xilence PSU specifically? Idk any that're good, but there are some okay ones at least. Always remember tho, 
phanteks p600 is good
the rog 3090 is only 318.5 mm
even most mid towers can fit a 380mm card
@drowsy grail
there are so many out there it would come down to preference
well go you have any case you like?
@drowsy grail tell me which you like and I can say yes or no
ah I'll have a look, appreciated
@drowsy grail did you ever decide?
oh yeah, it is big enough. it seems to be packed with features and will go great with what I am hearing of your build. linus liked it
that looks very strong
So just the cooler and case to decide
the helios works well, gamers nexus liked it too!
Yea I watched his thing a while ago
what would you guys recommend for as a cheap (bronze or higher ) 600 or 650w main brand psu?
What is it powering?
main brand
corsair cv 650, 80 plus bronze, used hundreds of them with zero issues and they are cheap, newegg has them in stock
Thank you alot ❤
anyone use a decent rbg strip for around $15?
hows the phanteks p400a?
I really liked my p300a so I'd imagine the 400a is pretty good too
Good air4 and good cable management
basically cant go wrong with phanteks
Have a question for a relatively new builder, I have a Asus p8z68-vLX board with an i5, with a Asetek 510lc cooler with a Hybrid GTX 980 ti my question will this fit in a midsize atx case?
Also any idea how much power I will need from psu
@vestal dune this looks like it will easily fit into any mainstream midatx case, which one do you want to put it in?
Diy s07
you are building a very odd computer my friend
but it looks like it should work with that and a 650-750 watt PSU
I REALLY hope you are not paying a lot for this system there are some... flaws
@vestal dune
well the
pc will work but its just not very.... usual and the CPU will prob be a bottleneck
Yeah it's for my son and sorry it's a i7 2600k
Just made up of some old parts a friend of mine had, not much needed son wants to play roblox so should be good with this set up
cool man! I am more of a lancool person myself
Anyone have any experience with a Corsair RM850x? Is it still worth getting or is there better recommendations at that price point?
@elfin pawn corsair is always a safe option
but right now I think the evga bq850 might be a better deal by a couple $
does anyone know why the lian li o11 dynamic mini was taken off of the newegg website?
IDK
its just like not there
i have it preordered i just have no idea why its not on there anymore
prob not enough supply @glacial thorn
i was just saying out of stock but now its actually nowhere to be found on the website which is really weird
wack
the person that put it on the website prob wasnt supposed to yet
just send a request for a refund or sum
no it was a preorder item that was supposed to release on the 12th but then it got delayed until the 22nd and now its off of the website
I know that the O11 mini had some version that wasn't supposed to be released
Or even on any sutes
That could be the one
Did u get an invoice?
@glacial thorn
If u did you should be able to refund
If u didn't ur card wasn't charged
My dad ordered it so he would have to check his email tomorrow but it wasnt the snow version that wasnt supposed to be released it was just the standard black one but I did just contact lian li's support @young arch
what cases have 420mm rad support
how about this Phanteks Enthoo Primo schwarz Big Tower
is this worth it
i could get it for 120
cheapest but not so bad case with 2x360mm rad support? Cheapest I could find was Corsair 4000d, and I dislike spending that much on a box of metal + glass
not required to have, more of a "nice to have"
might stick with 240mm+360mm rad depending on case price of 2x360mm
I was gonna say, I don't think the 4000d will do dual 360mm rads at the same time
iirc it should
I realized two things. Firstly probs should not go just off of fan mounting cuz rads are bigger (as in 3x120mm fan area wont always fit 360mm rad), also that I cant math at all. I looked at top and thought that was 360mm cuz I counted three screw slots.... except that is 240/280mm.
welp what fun times I have
I mean
Lian Li will guaranteed fit but it's $150
I think you're going to be well over $100 if you want to do that
fake techie intensifies
but yeah, I tbf like spending about $50 on my cases and dont think they are worth much more then that. So basically any premium option like LianLi isnt something I ideally want
Ya, I figured
I mean, you could always DIY an open air kind of thing for cheap
Hang it on your wall
it's a bit of a ongoing meme for me. idk why I decided to start it, but just deemed myself "fake techie" for the lolz
Just because you don't want to spend money doesn't mean you aren't a techie
I honestly think for what you want an open air platform test bench type thing would be best
I think I started it more from the "unofficial techie" name I gave myself before being an actual techie. Just decided I needed a new name and went for a nice self deprecating one
we all fake
except naed
As for open air, maybe. Wasn't my original plan, but might do that. Had some thoughts about having the rads just be over my mouse/keeb to warm my hands cuz my bloodflow sucks, so my hands get cold easily and never warm up from body heat
I dont have a great location for my PC. Was in the basement, now (and most likely temporary) in a bedroom inside the basement. Warming up a basement that isnt small, not something that my spaceheater PC could do
My office is like, 10x10 so
hey guys
i am so fricken confused
i have a macro ir micro atx motherboard with wifi, but my airpods cant seem to be picking up voice nor headphones
i only have 1
sometimes it gets sound input
but no mic
other times neither works
hmm... sorry IDK
whats the best case , Very Big , A lot of fans And Custom liquid Cooling
can be any price
@south flame well if you want big, the lian li o11 is hard to beat with watercooling
But i like the phanteks p600
There is also the ROG helios
bequiet 900
Was legit just about to mention that case
I have used it is really good
Any of those 4 are good
@mellow timber if you want type c, 4000d airflow has one I'm pretty sure
Does anyone have any experience with 4pin molex cables to SATA?
Im' trying to add extra drives into my PC but I ran out of sata connectors to use
but i've hard that 4pin molex are very poor built and have a possibility of catching on fire?
It's fine
it depends
i forgot which one but theres some that are safe and some that arent
and @opal night it is NOT fine lmao theres still a chance of the connector nuking drives
As long as you make sure the pins are straight before you put them together, it's fine
nah
SATA drives draw so little power
ive seen it happen racer
You're not gonna nuke wires
Not theory
XD all the connectors are crimped. It's how they connect the pins to the wires
I've seen Seasonic PSU
s nuke themselves into orbit, yet they're still recommended highly
I worked on electronics for a living 🙂 300,000 volt Xray machines
I know what electricity can do LOL
i just babysit a bunch of arrays
That review is wrong
and all my friends do the same
and its a common saying
molex to sata, lose all your data
The device will only draw as much power as it needs. Just because it can carry 22 amps doesn't mean it will. Amperage is a pull, not a push
A Sata hard drive won't even pull 9 amps. 500 mA -650 mA for mechanical
👀
Question, what are the EPS/ ATX wires for in the PSU?
all of those pictures show the SATA power connector is the problem, not the molex end lol
EPS is the extra 8-pin CPU power
Where is it supposed to connect to?
Does anybody know if a Phanteks Eclipse P500 Air DRGB Case with a Phanteks SK 140 PWM Fan work without a fan controller or extra accessories with a ROG Strix B550-F MOBO?
those are molex
old 3.5" drives and optical drives usually
not much uses those anymore
this review is for a device to use SATA to power molex devices, not the other way around, and yes that can fry your shizz
only if you have a device with molex power connectors on it. otherwise you don't need it
And for the sata cable, I would generally only plug in one of them correct?
only as much as you need
I can connect multiple things on the one cable?
Right okay
you can use all of them if you need to
Alright thanks
I have another question lol, I would only need one cpu power wire right?
For the top left
Would a Phanteks Eclipse P500 Air DRGB Case with a Phanteks SK 140 PWM Fan work without a fan controller or extra accessories with a ROG Strix B550-F MOBO?
Hey, I am looking for a midtower case for my new build, the only thing I'm worried about is my current dorm accumulates quite a bit of dust and I was wondering if that should be taken into consideration when purchasing my case...
If I need to buy a special type of case, or some special filter for the case I end up getting or whatever the case may be
Single 8 pin (4+4)
It's up to the number of fan headers on MB. You'd have to look it up
thanks, my mobo has 1 argb, and another dude told me that I can just daisy chain all of them and put them into that one
just get dust filters
Quick question, I have the p400a case and I'm not sure what the case fan connections are
I have no idea what these three things are
But I don't know where to plug this to the motherboard
Or does it not connect to it
no
those ends don't go into MB. other fans plug into those
whats on the other end
?
There is one open one at the end since I have only two fans
The other end goes to the front panel
Where the power button is
Is the daisy chain necessary?
Can't I disconnect both fans from it and connect it to the motherboard?
https://www.bestbuy.com/site/corsair-rmx-series-850w-atx12v-2-4-eps12v-2-92-80-plus-gold-modular-power-supply-black/6229601.p?skuId=6229601 Is this PSU any good? I tried looking at the chart but don't really understand it
yes
Recommend any ones in particular or should any do
@crystal granite well most cases have similar amounts of protection but I have seen fractal design do a good job- try a meshify C
What PSU should I get for a r5 3600x and rtx 3080, non modular preferably
@scenic lance Just curious, why non-modular?
With all the parts that I'll have to replace im nearing my budget and I'm honestly too lazy to care for both cable management and overall aesthetic
I mean, if you just want cheaper, could say that
I mean I don't look at my case while I use my pc lol
So 750W is ok? that's cool I was thinking around 800-850w would be enough
Ok, thanks for the help!
750w is cute tbh
What about a Thermaltake Smart BM2, seems like I can't find the Seasonic Focus GM in my area
Where are you?
BM2 is quite a few steps down in terms of quality
If you need to buy from a local retailer, I can check them for you, I usually work off the assumption of the US market.
Well I'm buying from Germany, aka my cousin is in Germany and since the prcies in my country are in general a lot worse than in Germany he buys the parts and ships them to me
One sec
thermaltake is oof
thermaltake big oof
theyre one of very few brands on my "never buy" list
@scenic lance ask them about shipping for this
https://www.alternate.de/Enermax/Revolution-DF-750W-PC-Netzteil/html/product/1528499
Not sure about going over 100€, what about the Corsair CX750 750W
@scenic lance ask him about shipping for this then
https://www.amazon.de/dp/B0775RJ9MM
Well I think cause of Amazon Prime he has free shipping
anyways, CX is a good unit, but it's still a step down from a bitfenix formula gold
Hmm thanks, this right about fits in my budget!
mr1111 saves the day again
is this a good psu? https://pcpartpicker.com/product/jtm323/
yeah
Uhh
a 3090, asus rog crosshair VIII hero wifi
Pretty sure the price ranges are vastly different
Second one looks like a MX410 mesh that's like 60$
IDK, the latter has RGB BUILT IN!>!>!
First one the conqueror is probably around the 300$ mark
cougar conquer and mx410 mesh-g rgb
just whichever would work better
like better airflow more room for a gpu and so on
I'd go up a bit more from mx410 to Lancool ii mesh or TD500 mesh or P500a
Conqueror is just
Impractical
It looks cool tho....
Hm I need to look into build quality P500a vs Lancool ii mesh at some point
As in ease of installation and nice to haves
Conqueror probably has a better airflow.
It's practically open air
Where do you live Cyro?
the p500a seems to have better airflow though...
(country/climate)
And the case fans don't have much space to direct airflow
maple syrup land
same!
Easiest way to describe o11 is overused
It's just decent in all regards
But you need to fill it up with fans for good perf
Oh and it can't fit a good air cooler
That kills it for me
No d15 no u12a no drp4
Water is life
@opal night and cost
Tbh the way to use o11 with the most sense is to buy a 360mm aio with it
So you get 3x120mm intake
Water in general is cost :p
Suggestions for mATX cases under $90? No need for flash but I'd like metal and a good build
Mb311 iirc
Shipping, otherwise great
$15 case 
Does anyone know of any optiplex 7010s for sale that already have a decent cpu inside? Like under $100
if i knew of any id have bought them all 
@eager monolith please no n200 I’ve used it twice and hated it both times
I went with this 😅
Wanted more of a budget one anyhoo
Yeah, I'll let you know how it is
I don't need flashy for this one, just sitting in my basement
My lain lee lancool mesh 2 rgb ‘s bottem fans rgb is a bit wonky I have made sure that it is not the fan header etc do you guys think there is anyway I could get like a partial refund or a new fan from lian li or b and h photo
It is not a cheap case
How old is it?
Hi All, i've a question around Underdesk CPU holder. I've a computer case that's about 10" (255mm). Does anyone know any universal Underdesk CPU holder (mount) available in the market?
Okay question, So I was thinking on getting the Seasonic FOCUS PX-750 because its a great deal for my price range atm but
Seasonic FOCUS GX-850 is also really good to but its gold not platinum
Which one would be better for a RX 5700 XT Powercolo Red Devil and a AMD 3700x?
Heck even the Seasonic FOCUS GX-1000 is good too lol
Ikea used to stock a L-ish shaped one
all of them are in the "good enough" range.
so its just a question of you picking one
most of the L shaped ones are smaller than 10"
my stupid case is 10" facepalm
10" <- is one dimension, what about the rest? @weak elbow
haha thanks! was going crazy
there is the Summera (300.094.38) which is meant for a specific line of desks from Ikea.
(this is not the one i was thinking of)
still looking for the one i had in mind
that is a evolution of the one i was thinking of
Yeah.. it’s not 10” width haha maximum 8”
But thanks for helping!
again, that is the "type" you want to start searching for @weak elbow
and the problem/challenge with the 10" width, is the "weight" it puts on the side furthest away from the single pole that mounts to the desk, hence why, the "normal" solution is 2 L brackets, one from each side (if you need to mount something that is very wide to the underside of a desk @weak elbow
you are very welcome :)
there is the option of going for one of the L shaped ones, with a strap solution
under 100 is rough cause i buy them all 
xD
you got to snoop around the schools
slap a 1050ti in a levono office PC and call it a day
600 dollars made
fr tho
and since I am still in middle school I got them on the inside 
i bought 200 of them last year
damn
i5 4th gen 8gb ram 500gb hdd
I use offerup
and I just drive the truck up somewhere like a curch
nobody checks who is driving lol
I just want to make sure, does a psu make a little sort of clicking sound
it does not matter to me I just dont want to kill anthing because of a bad psu
I have a corsair rm 850 btw
@charred agate mightbe the fan
That is what I was thinking. I am going to try and look in there but I don’t feel like taking out the psi. I will just do with the 10 year warranty or whatever if the problem grows in the future
Figures
Looking for a portable lightweight case that a asus rampage v edition 10 motherboard would fit. I'm into music production and want something on the go. Any recommendations would be appreciated
Cheap preferably
Portable EATX case?
Ummmm
That's not really going to be portable nor light. that's the biggest motherboard form factor
but this has handles
The motherboard is a EATX? I just need enough space for that motherboard and a 3080
Thank you!
Yep
Biggest form factor possible other than server boards lol
If possible, find an M-ATX board
Much smaller, smaller case too
Yea
If you want REALLY portable, which probably isn't gonna happen with a HEDT platform, ITX
3080 would be too big or the case would be too large?
The case would need to accomodate it but it wouldn't be bad
3080 size depends on the specific card
they're generally quite large but some are on the slimmer side
M-ATX would still fit my motherboard? Anywhere I can learn about the sizing and atx stuff
We're talking about switching your motherboard if possible
Yes
Becuase the motherboard you posted is the largest physical size
Which requires a case that is anything but light and portable
(One of the largest motherboard form factors)
Okay so rephrasing that question anything with handles then? I understand now im not gonna get anything light haha
Asus (I suggest looking around on other stores so you're not buying from a 3rd party seller) : https://www.newegg.com/black-grey-asus-tuf-gaming-atx-mid-tower/p/N82E16811173034
Cougar : https://www.newegg.com/p/N82E16811553024
Appreciate the help guys!
need portable rackmount server 
Just like an open rack?
lmao nah i dont move my babies
small brain is moving destkops
big brain is sshing into your servers over your vpn
how does what benefit me
it is good, a little cramped with AIOS on ATX
should work
I'm new to building a PC. I am curious about power supplies with a 3080. The 3080 needs 3 8-pins? What type of PSU am I looking for? The 6+2 pins or what?
NOt all 3080's take 3 8 pins
Just the Founders edition
Hmmm
lEVGA does too
So, lemme find you one
What about the Strix edition?
@opal night I was attempting to be safe, so I chose an 850watt PSU at first. Will 750 be enough headroom for 5900x and 3080?
even with some power draw spikes?
Well I don't think my choice supports 3 8pin power to a 3080. I chose https://pcpartpicker.com/product/jtm323/corsair-rm-2019-850-w-80-gold-certified-fully-modular-atx-power-supply-cp-9020196-na
is anyone here?

Hey. Question about garbage cases. I was planning on using a junk Dell case that I salvaged. The only thing that bothers me about it is that the plate that is built in has the raised built in dimple standoffs. Is that something that I should be concerned about? is that enough of an issue where I should buy a $25 case to avoid it?
how i can know what is my power supply wattage without opening the case?
Yeah, since those are customisable, no real way to tell there either
UNless you have the email from your order sheet?
whats the best micro ATX case with preferably a front io? i was gonna get the q300l but ive heard mixed reviews on the airflow
as cheap as possible
ping me with answers cuz ill probably forget i asked this
Thoughts on Vega 64 and Ryzen 7 3700X on a 750W bronze PSU?
fine
OC the 3700x?
id say u need at least 850w
Nah, PBO is it
no the vega

i had one and it was the worst card ive ever owned btw
i wouldnt get one
@opal night it used 500w just by itself in spikes

tripped overcurrent on 2800w of psu 
@opal night i need you at #cpus-mobo-and-memory
What’s that mean
anyone have any case suggestions? (preferably a mid-tower)
What budget
preferably nothing over like $110
TD500 mesh/P500a/Lancool ii mesh
Will they ever get the white p500a
Newegg only has the p500a in black and not white. I'm trying to make a white build and im living in Canada aswell
Phanteks
White build so much more expensive
But i pay the rbg tax 🙂
Not sure if im supposed ot be dropping my build here but this is what it looks like https://ca.pcpartpicker.com/user/MrPenguinMan123/saved/prPjZL except for the monitors I wasnt sure which one to get
https://pcpartpicker.com/list/Fb6tLP Can someone look at my build and let me know what kind of case and what psu I would need.
i bought abs desktop prebuild and i have question for the front lighting
i cant make them work even if i click on the led buttom
no more than $100ish. the cheaper the better though. @young osprey
lian li lancool 2 mesh maybe
phanteks p400 or p500
cooler master td500
silverstone fara r1
600w PSU
ok thank you
@young osprey or @opal night any decent 600w psi’s you know of?
psu’s*
thank you
any good psu brands
Evga, Corsair

All brands have their up and downs
EVGA has P2, but also has N1
Corsair has AXi, but also has VS
Just got the Rosewill FBM-X2. I haven't built with it yet but it looks pretty nice for the price. Be aware that the clearance with the PSU is pretty bad... there is a non-removable hhd cage that might interfere. Hopefully my CX450 with fill in there 🙂
looking to get the o11 mini and was wondering what psu is on the market it for it around the 850-1000 watt range
Any protections missing?
Bop maybe
Do you think it’ll make that much of a difference not having it
@tender root digging through the box of extra stuff I had from my build, this looks like a PSU tester, since there's only 2 pins and seen to be the right pins for starting the PSU, what do you think?
I don't recall which 2 pins but I do recall having to jump 2 of the 24 pin so that seems right
what psu could i use for this mobo Z390 AORUS MASTER
Most psu aren't tied to a mobo
Generally you pick psu based on the total power draw of your system
it is a "psu starter" :)
on the latch side of the ATX connector, the green and black wire, specifically the ps_on and any com connector are what you want to connect. (keep in mind, IF its a OEM psu, its prudent to make certain that the pinout is NOT custom)
Don’t go by Brand’s
@warm lark be quiet doesnt sell anything thats bad
Pure power L8, L9, L10, System power 8 are a few examples
not bad just not good value for money
honestly idc about tier lists my way of seeing if smth is bad or not is "does it blow up" and ive never seen a fsp unit fail
Corsair PSUs are a 50/50 tbh
Literally bad
good in terms of them not popping 
Neither do I, my knowledge is based off of reviews
professional reviwes*
I go based on, hmm's and if's and will it's
but most of my important psus are from fsp/delta
I haven’t had enough psu’s to say off of my own experience and even if I did I do not have the proper equipment to actually test if it’s good
If you find the right psu its gonna last you years maybe
@fallow cairn again "good" in this case is just reliability
Good could mean something different to someone else tbh
“Good” is sufficient protections: LLC resonant topology, DC-DC regulation (what you want instead of group regulation), fan quality & curve, transient response, protection thresholds, voltage regulation quality, capacitor amount and quality, ripple suppression, and warranty.
Some do, some don’t
80+ Silver Semi Modular/Modular 500W
Hey guys, can someone tell me if a regular seasonic 850w gold PSU will fit inside the Lian Li PC-011 Dynamic mid tower case?
should be
if u mean the mid tower and not the micro atx version, because the micro atx ver. of the case has only space for an sfx or sfx-l psu
the micro ATX case is the new one that hasnt reached consumers yet right?

Oh, rip me not reading up
rip them not adding context to an old convo tbh
@uncut stump get mb511l instead
what guy?
whats the best budget micro atx cases?
What sort of budget?
id prefer around the £50 mark
i looked into the q300l, and the reviews are extremely mixed
Best is relative. Look down this list (https://pcpartpicker.com/products/case/#sort=price&t=7,6,8) until you find something you like the look of in your budget, then check for a GamersNexus review, then user reviews
If you don't want anything super flashy, I just got a Rosewell FBM-X2 and it seems good for the price ($28). (be careful of PSU clearance if you go with that tho)
That's pretty much the cheapest mATX one I would go for atm
i mean i want a simple case with a side panel and a front IO
like usbs on the front
So any case ever lol
im kinda confused tho, cuz these cases some dont have like a 'airflowable' "front" like the one opposite the back
Also, uk.
Ah. missed that
Not a great selection lel
Ignore my rosewell recommendation then
damn i cant put pictures on here, mind if i dm you?
Not always as simple as just taking a glance, but it looks solid to me
yeh?
😄
im confused, on amazon it says it is just the case, does that incllude like cables and stuff that usually comes with the cases?
or does that not happen?
how do i check what size fans it supports?
the fan space at the back, thats always 120mm right?
ye
While you shouldn't always trust retailer specs, Newegg specs are just so damn easy to find :P

Quick question for the experts...item 9SIATPED3H6142. It is listed as a power supply, but low price and weird title makes me thing it is just cables. But, there are options to select various wattages. Chat agent was not helpful.
On newegg?
Thanks. I mean, I kinda figured based on the price.
No idea why the different wattages though.
Typically cable sizes, wire size
Thanks for the confirmation.
diff wattage size might be what the cables are rated to?
my case is going to be the file drawer of a 1950's tanker desk that I'm bringing back to life 😄
Fighting with myself over what case to get.
Corsair obsidian 500D or the MSI MPG Gungnir 110R. Hesitant on the MSI case because I've only ever had corsair, lian li or TT cases.
What one would you pick?
4000d airflow 👌
There's the P500A too, to throw a wrench in things
Hey, my dad wants me to use a cheap case with bad airflow because he’s basically mr crabs, what would happen if I used the old case that has bad air flow and is hard to build in?
Or if I use the sketchy psu he wants me to use because it’s also cheaper then a well rated one
Did your Dad buy you the PC Parts?
Might not even fit then. Dell case or HP or anything?
It’s called a viper or something
Hmm, don't know about that one
Yeah
Could always drill some holes?
He’s cheap as heck
Yeah tbh I don’t wanna do thag
A the front is weird as heck because it’s got a plastic face on it that comes off on hinges
dont use a sketchy psu please
It still has optical drive slots
And yes Ik about the psu, I don’t wanna fry my stuff
I’m trying to convince his skimpy a** with the idea of paying double because all the parts got sploded
that case gives me spider vibes
Nope
racer did u see the supero cases
Hmmm
My dad said it was cool because it had ‘LiGhTs’ like I can do that with an led strip
This one?
Vintage that p500a looks great. Thanks for the recommendations guys
Very close to that
So basically he’s giving me 100$ for Christmas and I already found a decent case with 3 fans and a psu for around 50~
And I have like 20 extra so I can fit some good stuff
Oh well, if you're buying a case with Christmas money, what's the issue again?
Idk, he’s just like persistent guy who yells at me for not ‘SaViNg MoNeY’
I’m basing it off rating, money, functionality, and looks
Trying to get everything I need out of it and the looks are a plus
Then the psu I am going for is like 650w since I’m gonna get a 5600 and a 3070
what psu 
I’m trying to find one still
My budget for the whole set up is like 1500
Trying to get a pc for around 1100~
Those are both good PSU
Alr
CX good
ye
not sure if i posted but the GPU having issues then found out it was cable from PSU.. well with new PSU and right cable.. the GPU = works 😄
i remember vintageracer79 was there 😄
Corsair CX650M good enough for a 3080?
Ryzen 7 3700X 32GB RAM 1TB Sabrent Rocket 4 NVME 512GB PCIE 3 NVME 1TB HDD
Ye
@opal night I think it's just OCP tripping from spikes with the 850w having issues
Hell, I wonder if it's because 850w single rail units have wacky OCP
so manufacturers purposefully set a lower OCP
That'd be interesting
List of confirmed working PSU's with 3080's
Just PSU info only and what GPU only for reference. OK Here is the list so far. As of 12/14/20 - Check the list before adding your PSU, if it's not on the list already post it. ASUS Thor 850ASUS Thor 1200ASUS ROG STRIX White 850 Bequiet Dark Power Pro 1000Bequiet Dark Power Pro ...
I would pick something on that list
ye
CXM way worse than CX
CXM uses two designs (for the modern ones). 450-650 uses a CWT codename "Santana", whereas 750-850 uses PUQ-B. These are decent, but they are low end double forward platforms
Another difference between these units--more at a specification level--no OTP on prior 2015 versions, OTP set too high on newer CXM version to where the capacitors can degrade, sleeve bearing fan, and also has the same issues as CV with high-transient/peak power GPUs, making it not favorable to any Big Navi, Ampere, or video cards of the like.
Also CX650 FOR 80 bucks isn't good
CXF is for 60 bucks
Super flower Leadex III for 80
This list is garbage
G3 lacks good OCP and OTP is set too high. Even if you don't need OCP on 750w, the unit can still fail and kick the rest of your system. Even the OPP moves out of ATX specs before triggering. It's a shame a good unit otherwise has lacking protections.
OTP is set very high, since they had to apply a huge thermal load on the secondary side to trigger it. The bulk cap's external casing nearly melted during the OTP evaluation.
They didn't even get any OCP results because the unit died during the OPP test,
So good job pairing that with ampere
also the same issue is with PC Power & Cooling Silencer 1050, OTP set way too high
Half of the PSU's in that list should not even be there
all they have done is picked some flabby high end psu's and then added the rest based off of the users in the comments saying they work
also Seasonic Focus FM/FX has shown with with vega, 970 strix, 1080 ti and 2080 ti
and it's still in that list
also G+ is built off similar to the GQ platform, is not good at all for its price (OTP could be hit or miss depending on wattage of unit). When crossloading the 5v, it moves to 2% tolerance (whereas similarily price units stay below 1%), ripple crossload on the minor rails is atrocious for the price, it gets hot around 70c+, we fail both 5v and 3.3v transient tests
pre January 2018 G2 has shown issues with vega, 970 strix, 1080 ti and 2080 ti and is on that list
Reason: Bad word usage
lol
@opal night honestly, that list is garbage and I would not take a single advice from that thing
watchu say >:(
it's about PSUs that's tested to work with 3080
which trips ocp
so I'm not surprised g3 is on there
G3 is great apart from the protections which have been not set correctly
😄 well you can't saying anything unless you have done a full tear down and analysis of the components used and then used actual testing to determine wether it lives up to it's name
I also have a CV650 that I paired with a 3070 once, just because it worked won't mean I would reccomend it
never said anything about if it's good

Is Corsair cv good?
CV650w is decent
550w
Uh are you sure
Oh yeah you right about the 650w
650w is better and less than that is worse according to tier list
My bad
yooo, i just purchased my 3080 LUCKY as shit, getting it next week but psu i want seasonic prime 850w is not in stock 😦 . Any recommendations for other 850w psu?
you dont really need 850w tho, unless you have a very high end CPU and OCing
^ but yeah, if you really want 850w then DF
(The extra 15$ spent is your choice, 750w will fairly easily do it)
planning on doing some ocing and stuff, just want the 20%leverage over recommended 750w
well gn merry Christmas hope you get what you asked for 🙂
Rm 850 from corsair is solid
RM is worse than revolution DF
Hey, what power supply should I get? Im kinda on a budget so I also wanna get something cheap but will work fine, like maybe <$100. Heres my list:
bad list but super flower leadex III 650w
What can I do to improve the list?
Im pretty new to building
is not using a 3060 ti with a Ryzen 7 3600x with a B550 motherboard not ok?
no, that's still C18 ram
oh I misread
might have to go without rgb to save some money then
Ye
Lemme see if there's anything less expensive but I doubt it
It's your lucky day!
red heat spreaders though
oh that'll work!
is my motherboard ok? I was told to get a b550 and the cheapest I could find was $94 but it has no wifi so I would of had to buy a wifi card and a good one cost $35 so it would of been $130 overall so instead of that I decided to get a $130 motherboard with wifi but im not sure if its ok or not
I wouldn't push an overclock on the CPU but it'll be fine
ok, thanks!
YW
B550 pro vdh wifi is ~110 usd
I got the NZXT H510 in gift yesterday, but i heard there should be bad airflow...
Is there any way to fix it?
So, seasonic or corsair for PSU's?
Read a ton of reviews, can't really tell here
Looking for an 850 watt platinum

@drowsy grail is there a reason for platinum? Efficiency rating doesn't tell you anything about quality
I just want a more heat efficient system, usually better build quality comes with the higher plus ratings
and it's not that much more expensive vs gold
depends on the load
Anyways, my suggestion stays on Revolution D.F. for 850w unit
Hm? Iirc the 80+ certifications are all ~2% apart on every load
do i get a thermaltake s100 or an nzxt h510
i don’t care about rgb or looks, just need it to be easy since it’s my first time building
I like the lian li pc-011dw
I haven't built in it though, so I don't know how easy it is
(pretty sure those cases are around the ~60$ range btw)




