#cpus-mobo-and-memory
1 messages · Page 133 of 1
It worked before on my old motherboard and before I replaced my new one without issue
I gotta go to work
Corsair 4000d airflow or NZXT H510
4000d
is 3600mhz c18 better than 3000mhz c15?
im only asking bc i want to know how much more of a difference there would be upgrading my ram, and if i could/should just settle on something in between
what would be a good cpu to pair with a 2060 and my budget is 700-750 case not included in the budget bc i already have one
probably a ryzen 5 3600
it's $200 but i'd wait a lil till it goes back down to like 170 ish
solid cpu
ok i’m not buying until end of next month or later anyway
yeah i'd check back here like a week before you buy and we'll see how prices are doing then
ok cool
my motherboard has a 4 pin connector but my cpu is a ryzen 5 2600, will this be enough for gaming until I can get a new motherboard?
psu is 500w if that helps
can you split a cpu header or can you only split system fans
the question is phrased kind of weird @polar mist
you can put a 3-pin or 4-pin splitter on any of the fan headers @wild cypress
ok
no my cpu power connector
i know it'll be able to run but will I need 8 pins for gaming for more than like 2 months?
yeah, you connect whatever your MB has
before I get a better mobo
it doesn't matter if you are gaming or doing something else
if your MB only has a 4-pin then thats all you need
ok thanks
aight
Hey does anyone know if the gigabyte z390 aurorus Pro WiFi comes with bluetooth?
Alot of the wifi boards I've noticed come with bluetooth as well you can find it usually in the specs section
What does turbo boosting mean on an intel chip?
Turbo is an automatic clock speed adjustment
So the chip goes faster than the normal speed
AMD processors do it too
Alright so, I have a plug in from the PSU to the motherboard, it's 1 plug with 2 squares and 2 curved, but the other is 4 curved plug ins.
And it wont send photos
Psu to your mobo should have 24pins
8pin connector then
Also nice profile picture
Yeah that
So the plug ins on the motherboard all different shapes but
1 fits the way it was designed but the second is all curved
Itll be a 4+4 connector, not the 6+2
It still fits but not sure
Itnis
I know the 6 2 is GPU
You don't mind if I dm you the photos I'm talking about
Sure
My explanation of things is bad
For some odd reason 3 photos wont send, I think my fingers are in the photo or something that looks wrong.
the connectors are keyed, go in one way. 4 +4 pin commonly located at top left of mobo is cpu power
weird it sends but
Hard to see I apologize but 1 plug in has different shapes while the other is all curved, is that for me to understand that this goes in this way?
(Solved)
Are these two compatible
post link from newegg or take off the beginning of link
sorry. it wont let me send link. its the tforce delta rgb and b550 pro4
i would imagine it's fine, but you can always look on the motherboard manufacturers site for ram support
i tried but i couldnt find anything
Is it ASRock?
yeah
yeah its that one
Look around specification
Should say "Memory"
Or download the manual and take a look
If you're unsure ask in this chat and wait for someone to reply
Im so lost. i found that it supports some tforce ram but i have no clue
theres nothing there
thats the night hawk rgb. i have the delta rgb
ill check on pcpartpicker
i checked there and they didnt have my model
of ram
https://pcpartpicker.com/list/xbLqkX I already have the ram and board, im thinking of making this a second build to stream off of, dual pc setup. is this viable? i heard four cores is all you need
@naive pendant yeah i do
i own both. just dont know if they support eachother. ive been told that they do and dont from different people so idk @naive pendant
well i like the ram for the price. i want it to be white and rgb if i get different ram. but im not too attached to the mobo. the problem would be finding another white/ silver board for the same price on a 500 series board
@naive pendant
well this is a new build. and people from other servers and forums ive asked @naive pendant
ah
Plus the partpicker doesn't really have everything, has a whole lot yes
My motherboard doesnt show on the partpicker so
Hmm
Personally I can't help you, I would just have to wait till one of the Techis or Mr1111 helps as I trust him
I wish I could but my knowledge of PC stuff is bad
im on the linus tech tips forums and i asked and everyone is saying yes
Then I would go with that, and if it doesnt work you can return it as long as it allows you too
they do support each other
yeah
My motherboard isn't working with the Ethernet cord correctly
When I plug it in it works for a solid few seconds, then stops
After that it remains that way
I've looked around my device manager
hmm, sounds like a port or cable problem
the cable might be loose or smth
try testing a diff cable, if not, buy a LAN card
Ok. thanks to everyone that helped me
Well I know it's not the ethernet cord
Or router
And the port works
Even shows orange
did u try uninstalling drivers
for your wired adaptor
and restart so it reinstalls
Delete the driver software?
Or dont check it
And just uninstall
Well I dont know if I delete the driver software and then restart but
Certainly didn't work without deleting it
Well I'm screwed
Should i get 16gb of ddr4-4000 cl15 7.5 first word response
Or just normal 32gb at that point
neither?
you havent specified what you need your ram to accomplish
if you need 32gb, ya get 32gb
if you need the lowest latency and the highest bandwidth possible, you get it
i am 99.99% sure that you dont need either
?
what does this image have to do with your ram question
idk
then why are you posting it
and this link
idc
anyway
that combo is a waste of money
unless all you want is a guaranteed 3090 order
but for 2k? just pay scalper prices lmao
Hes gonna sell mobo
yea probaly
probably isnt a good enough reason
He said he wants to play 8k if he can
ram
whats the deal with that
so you are putting together a parts list.
yep
when are you planning to buy
December-ish
then stfu and wait till then
planning early cuz im hyp3d
god, how long have you been asking this crap
stop
stop planning
no
no planning
planning bad
wait the day you are planning to buy
literally
THE DAY
YOU ARE BUYING
ask then
if you arent buying today, dont ask
i think it doesnt matter
sorry that list makes me cringe mega hard
Let a poor man ask if ram is good
any list you give me will be a bad list
@heady root how so
@heady root it doesnt matter, hes probably been questioned about that monitor like 10 times in the past
that list is meaningless
Mr1111 said its good in #old-monitors-and-tv
stop harassing people about your component selection
stop talking about it
until
december
ez
Im just asking if the ram is good
4head
3head
7
pog
pogO
poggs
Doesnt have pogO
doesnt
OmegaLul
dont have it
Want me to give u server links for it
nah
when are new ryzens coming out ?
Hey guys do you think a Ryzen 5 3600 is a good buy with the RTX 3070
I mistyped, the 3070 I meant
it should be fine i mean it depends on the resolution that you game at
@misty obsidian nov 5th
I prefer 1080p but I might have to go 1440p since they are better for the card to reach its full potential
it should be fine but why would you waste the gpus potential
I dont think a 1080p monitor will waste anything
But I hear a lot of people say its better to have a 1440p for the RTX 3000 series
the gpu if it does get 2080ti performance than it can game at 4k
since we dont know the actual performance numbers of the 3070
how about waiting for those reviews instead :)
true yes Ill wait
😉
I have till December to decide on a GPU
I might go with intel cause my teacher mentioned that the intel have lesser cores but faster ones for the price
So it will be a quality over quantity scenario if I pick Intel
i mean the good intel competitors are 100 dollars more than the amd ones
@naive pendant tell your teacher to go read up on things :)
i mean thats how it used to be
I remember Intel CPUs were much faster on single threaded tasks
But that was years ago
i dont think that that is how it is now you wont be lossing much more that at most 5 frames with an amd cpu
come nov 5th, IF the reviews are what AMD is currently claiming, there is no reason to go intel, unless you are on a very particular budget
i dont see a reason to go intel rn even
thats a "lot" of budget
oh you in theory could fit a 3080 in that budget
ive tried trust me
not "in theory" you can
if you dont care about looks
always goes over where I live
oh
oh
where are you located?
Southern Europe
Shoot my battery is 5 percent
I gtg
Thank u all for the advice
I greatly appreciate it all
Question. Buying a ryzen 5 3600, and a 2060 gpu. Do you think prices will drop for either with the release of zen 3 and the 30XX series or should I just buy them now?
do you need the machine right this second @lusty wraith or can you wait 1-2 weeks?
I don't need it right away, but I'm curious what the potential savings might be with the releases coming out.
The mobo, cpu, and gpu are the last 3 parts i need to buy
depends on the actual performance of the parts that are coming
until we know the details for that, the market (at large) wont react
Fair.
Same speeds but I prefer g.skill
Ok, I dont know much abt pcs and their parts but I knew they had the same speeds, but just incase something else was different, I wanted to see what other people thoughts were
Corsair uses weird memory dies and their heatsinks are unnecessarily large lol
Alright ty

oh but if you like the corsair software then i would use those
@rugged sierra iCUE is seen as one of the worst in terms of rgb bloatware so...
I dunno...
i like it i think that it is better than apps like aura or mystic lights or the other ones
it is really just a personal prefernce
not when it comes to eating system resources
looks yea
system resource usage
now that's more quantifiable
but well
none of the RGB softwares are lightweight
😶
yes i agree but i also dont care
if you don't care then whatever, just pointing it out.
Corsair RGB Ram overpriced
can anyone help point me the right direction? new build, i7-10700k, GIGABYTE Z490 GAMING X AX motherboard, CORSAIR Vengeance LPX 32GB (2 x 16GB) DDR4 3200 ram (CMK32GX4M2B3200C16, listed on the mobo supported list); initially the ram ran at 2133mhz as expected, once I enabled the XMP profile it is showing up as 2800mhz instead of 3200mhz. Is there something else I should try or is the ram defective?
Alright so, my Ethernet port isn't working properly
My router is fine, the cord is fine
The plug in shows Orange and when I plug it in the first few seconds it works and then stops
I need help on how to fix this issue
Device manager shows nothing
Reinstalled drivers
Occasionally I unplug USBs and suddenly it magically works and then plug them back in but not this time
It's a B550 Taichi ASRock, I had it replaced so this thing is brand new
Any suggestions?
@royal geode check xmp settings again, sometimes they come with 2 different profiles, and one of them is correct
Does anyone know a good motherboard for the ryzen 5 3600 or ryzen 7 3700 that ATX ugradable with WIFI and 4 ram slots. (Bonus points if you know good ram for those CPUs)
To start off, what's overall budget?
Like 2000 CAD
Fun. When are you planning to build?
So like 1500 USD but I would wrather spend less
I mean sooner is better but I am waiting for the 6000 series
of radeon
It's best to specify regions whenever possible :)
Canada
Yea you should be able to also get a Zen 3 chip if you're waiting for Radeon
Lemme see if I have the 2000cad list laying around still
Ok, thanks
Found it, take a look at this real quick, the CPU and GPU prices are converted straight from USD MSRP.
https://ca.pcpartpicker.com/list/cGYJ8J
Ask any questions you may have about part selection @sleek breach
Well I would wrather use a h 510I so its compatible with that right?
oop the motherboard price might've went up
uhh no why?
Generally we very much dislike H510 as a case.
Airflow
oh
Looks is like 2% of what I take into account for case selection :P
I hvae a friend who has one and he says its great I did not know it had such isues
Here's the thing
with cases, in general, H510 is fine, it works, there's a bit of airflow
But also with cases, there's just so many better options at near the same price.
Ok, thanks I will keep that in mind
Anyways, any other questions?
Wait Rn I have the phantek p400 is that a good case?
P400a or P400
just 400
P400a is pretty great
Can you check if you can get a mesh front panel for the P400?
Without a mesh front panel, it's meh, it's workable, you can save some money by keeping it.
Well I built that build with my Dad in 6th grade you see im 15 rn so I dont own that PC
So I gotta get everything from scracth
Anyways thanks for your help have a good one
You too :)
Mr1111, able to help me?
sure
So this is the issue I got
I'm using wireless at the moment
But my router sucks so it disconnects more often
I no good at networking :(
All I can tell you is check drivers, mobo drivers for ethernet and usb mostly, and then do the windows un-screwing pinned in #windows-ios
Ah
@royal geode check xmp settings again, sometimes they come with 2 different profiles, and one of them is correct
@hollow thorn there's only 'disabled' and 'profile 1'. I tried setting all of the options to the spec that ram lists for the 3200mhz and it still just is at 2800mhz
Yeah I did that, even deleted the drivers itself and reinstalled them
But alright thanks
GIGABYTE Z490 GAMING X AX
the xmp profile lists the correct timings and ddr4-3200, but once rebooted to the bios the indicated frequency is just 2800mhz
so question if I was going to go for x570 excluding the price which model would be best instean of a B550
hm
@ebon sinew you do know ignoring price the answer would be something like a 300$ X570 unify right
yeah i know
then that's the suggestion >:D
oh no they're multiplying
@royal geode did you set any manual frequencies before?
it's a good board
I've tried it both ways, only choosing the xmp profile or by setting the values manually. Not sure if it matters but CPU-Z shows 1400mhz (makes sense for the 2800 value) but task manager is reporting 3200
but I only did 1 way at a time
I mean, x570-plus wifi is one of the most frequent mobos I tell people to grab >:D
lol
sure, I'll try that
@hollow thorn that's why I got that board pretty good price for what it is 
so if i didnt want to have a b550 and I choose x570 the x570 plus wif with be the best one
tCL 16, tRCD 18, tRP 18, tRAS 38
@worn night how is the board
sometimes they split tRCD into tRCDWR and tRCDRD, both should be 18 for you
Assuming your ram is rated for the normal 3200c16 timings
@royal geode and 3200mhz manual, with xmp profiles off :)
I like the features for the price plenty of slots. Got mine for like 160 @ebon sinew
really did you wait untill there was a sale
Kinda
X570-plus non-wifi is 160$ on average
okay
x570-plus wifi is like 180$
I paid more like 137 cuz I had a discount card
My other option was the Asus x570p
That's a simpler board that was about 127
mm ~150$ on average for x570-p
Walmart has offered it 127.99 several times
Newegg usually like 149.99
Amazon similar price to Walmart
eh, it used to be 150$ at least
They fluctuate
Just like the 3700x always fluctuating lol
@hollow thorn I entered the ones you listed, reboot into bios and it shows 2800mhz again, I tried with tRAS 36 since that is what my ram technically specs and still showing as 2800mhz
the hell
anything else you think I should try or just return as defective? they arrived yesterday in the box
I'd spend another like 10min digging in the bios if there's some weird setting, if nothing, I'd contact support for an RMA or return.
I'm assuming if the bios is defaulting dram voltage to 1.2 and the ram I got is rated for 1.35, that should also be one of the changes I make when manually setting them up, sound right?
I think I've tried it both ways now, no change
I appreciate the help, I didn't think I was going crazy
You should follow what is rated on the ram yea
anyone know if a ryzen 9 3900x is compatible with a b450M steel legend mobo?
Anyone know where I could get a Ryzen 5 3600 used and works perfect ?
Core i5-9600K or ryzen 5 3600?
Got a question, just starting by saying Im getting an amd cpu, but for ram, is it more important to go 3200mhz with 16cl or 3600mhz with 18cl?
I got a b450 motherboard will it work with ryzen 5000 series or I need to upgrade to b550
@tulip talon depends on your specific mainboard. Check the manufacturers site :)
@lusty wraith see what i said above.
thats an old slide, it doesnt even have a520 on it
the plan is for b450+ to support Zen 3, with 400 series boards being left up to the manufacturers discretion
Fair. I just did a Google search and thats what came up
@red wadi 3600, because of AMD Infinity Fabric
Thank you!
anyone else get that x570 tomahawk that finally came back in stock? or was it just me?
I also got it, and by the time I checked it was gone
Can anyone help me find a manual for this motherboard I looked and could not find much ep-9npa+sli
that is a really old board :)
ya lol
i have not seen EPoX for many many years
Yea I know i got it for free and trying to see if it works
and for those of you that whine about bad 24pin placement (on current boards)
take a good hard look at how far we have come now :)
Lol
looking at that board makes me SO happy we have moved away from that design style
I'm getting up set at this bored right now
Hang on
It's is for this
aye
I do not know @Naed
there should be a list in the manual for the error codes @wind field
Oh cool
@wind field can you give me a picture of your ram slots
With or with out ram?
as it is right now
you see all that dirt?
there is a fair chance you have dirt under the currently installed sticks
Yea maybe
and you have to remember, those old boards can be picky as all hell
Yea I'll clean it out tomorrow thanks for the help
you are very welcome, and best of luck @wind field :)
Thanks I'm going to need it
oh yes :)
Now I need to put my psu back in another computer I'm trying to see if it works
Hey I got a question. Could I mod a motherboard to make it white. Even if it’s just the heat sinks
Hey @Naed u want to see more of the old tech I got?
@eager wind technically you can.
@eager wind just remember this: DONT mod something you cannot be without
@wind field if you do a imgur album or something, yes. But only if you have an actual use for the album yourself
because i have no practical use for it
i have seen all the old hardware i need to see for the rest of my life :)
Lol
to give you some idea
i have probably made about a hundred systems with that particular mainboard @wind field
@gritty meadow well what I really mean is like could I have someone else do it
it wont be cheap, and what i said still applies @eager wind
I have a old dell and the side panel is on a really big Henge and I wanted to put the motherboard in a different case but I cant
@gritty meadow like how expensive
no idea @eager wind depends on the local prices of the people doing mods like that
I'm leaving my skeleton buried
why is the corsair dominator platinum in white rgb so expensive ffs
it looks so thicc but i cant buy it
don't buy dominator
Cuz it's platinum, it's corsair, and it's white and it has rgb
easy
Hey haven't been on in a few days are we still hyped about the new ryzens?
Y not
Ryzen overpriced!!! Intel better value. 😉
Intel best for gaming
👀
i still think that htey shouldnt have raised the prices it is bs
I currently game with a 7700K CPU (Not Overclocked) with a 1080 video card. Would it really give me any noticeable improvement to get a higher CPU? If so, what suggestions? Thanks
xD
Hey what should I do I took apart a old prebuilt computer and it had a pink plastic film on the cooler that went in between the cpu and the cooler should I try and find a film like what was on it or put a thermal paste on it?
paste
Ok thanks
have you dealt with any of the naked die cpu's yet?
the ones with brittle corners?
well, you are edging closer and closer to that time period :)
Naed, i need help if you got the time
🤣 lol thanks @Naed
@naive pendant just say what your problem is in the relevant channel. and if someone can answer it, they will
Just got this to test to see if it works and if it doesn't I can take it apart I just got it today from a teacher
Brand new Motherboard, just got it replaced, My ethernet port doesn't work
@naive pendant i am not here to guess. So either ask or point me to the specific message where you asked. :)
@naive pendant b550 board? realtek 2.5g internet?
Asrock taichi yes
drivers
I replaced the drivers already
twice just to be sure
When i plug it in it works for a solid 2 seconds
show me device manager screenshot
Yes
based on what you are saying. its the cable if anything
Weird,
It worked with the old one, and even works when it opens up
Old motherboard*
half of that sentence makes sense
the other does not
"and even works when it opens up" <- what does that mean?
oops
It does work for a solid 2 seconds after plug in
Router is fine aswell
After the 2 seconds it stops
what do you use to indicate that it "works fine"?
please try and read that one more time
Then i don't know
and then answer me this:
What does the "WIRELESS connection" tell you about the WIRED connection?
I figured that you might think it's a router or modem issue
So i apologize that i mixed things up
i cannot read your mind, nor can i see what you see
best of luck. Just remember. Answering random questions, that have not been asked? that is not going to earn you any favour with anyone you ask for help.
How do I get someone from newegg who can help me with a new motherboard for ASUS M32BC
Maybe I should not have asked for someone from newegg, someone who can help me with a replacement motherboard for an ASUS M32BC
@lone matrix you might get lucky and find one, but you are aware that is fairly old machine right?
Yes on the old machine
I wanted to up the RAM to 16gb and go to ssd but I don't think the machine can handle 16gb of ram.
2sec
IF the mainboard has 2 or more ram slots @lone matrix
there is a fair chance it will work
because it is ddr3 after all
and 32gig total (with 4 slots was not unheard of)
also, the problem/challenge with your setup is that IF you want to upgrade anything, you start a cascade of upgrades
The motherboard has 4 slots and was originally windows 8.1
I was only thinking to upgrade the ram and hard drive to ssd
I guess if I try as is, the only thing I am out is the RAM if it doesn't work as the SSD can go to another computer but the ram may not necessarily match a different motherboard
the ram I have is PC3 12800
aye, ddr3
Does the processor limit the RAM, has an AMD FX-8310
Thanks for helping me @gritty meadow
(The only exception I know of is some intel chips supporting both ddr3 and ddr4 depending on the motherboard)
amd has had the same
Motherboard old ASUS M5A97
generally asrock being the "genius" behind the freak boards @hollow thorn
lol
Are you supposed to change out the thermal paste every 6 months or something or the second you put it in it's good till you replace CPU/CPUFan?
@naive pendant its good for many many years
Alrighty thank you
as long as you dont keep on removing the heatsink that is :)
Wasn't sure if it's a maintenance thing like keeping dust out
nah, as long as its kept "out of air" its fine :)
and its kept like that by being between the heatsink and the cpu :)
alright, I also solved the issue i had with the Ethernet cord, I plugged it into a different device and plugged it back in and suddenly worked. I unplugged and replugged it in a few times but not into a different device
So i apologize for the inconvenience i have given you
nothing to apologize for
happy to hear you got it fixed
sounds like you might want to think about maybe getting a new cable
because that sounds like a "beginning to have a loose connection" cable
That's on the list, Same with my PSU as i scrapped it from a pre built PC
fair
Already got my new RAM, and so that's the last thing i need to do and that's it
Any recommendations for the New Ethernet cord?
nah, anything normally works :)
For the Ryzen 9 3900x x570 or B550 mobo ?
b550 is fine @grim hornet
What about the msi mpg b550 gaming plus or rog strix b550 f gaming
look at IO
I am new to pc building so i dont realy know what i want or what stuff are important
number of usb ports
and sound ports etc
(and with that, i am out for a bit)
@hollow thorn if you have the time, could you help him across the line?
Oh yeah thanks man
np
hai, I'll have a bit of time soon
@grim hornet aight, what other questions you got?
You agree with the b550 ?
Tachai!!!
lol
https://pcpartpicker.com/list/B8WFdD
Or the corsair 4000d airflow
Question: Is this mobo good enough or should i get x570 ?
There are other choices
Ya. If anyone is ok with the IO it is a good option.
@grim hornet what kind of IO do you need though?
As i said i dont realy know about the io
Basically, what do you want to plug into your computer?
I.E., say you have a mouse, keyboard, usb headset, a usb hand heater, usb phone charger, etc.
Monitor, Mic(USB or XLR), mouse, Keyboard
Monitor usually goes in the gpu
Yeah those stuff your right
But you can do an hdmi
The standard stuff
Actullay now no but in future maybe
basically, io doesn't matter to you.
Yeah lol
@grim hornet basically, B550-A pro good nuff for ya.
Im new to pc building i have made a part list but i still need to choose a mobo I need wifi
@burnt pivot I'm talking in here because build chat is busy. Is there any specific reason for that mobo?
I just like it lol I know I could probably get a cheaper one but it fits in my budget and I want a good pc but it doesn’t have to be the best
You just like it for looks?
im trying to figure out if my laptop will be ok if used a 3200 mhz ddr4 16gb ram because it says its compatible i just dont want to overload my laptop or anything.can someone help
I gues
I gtg cya
well ill just have search because it didnt come with it
I would make a few adjustments to that list before you buy it btw
@tacit hemlock ok if u don’t mind send me the list or at me and I’ll look at it tomoz only if u don’t mind that is
What was the most you wanted to spend?
alright, if i get time ill make one

hey guys, does anyone know if the msi b450 tomahawk max has a 5v rgb header?
not 100% sure but i think so
i think MSI is the ones where the headers are labeled jrainbow
look at some zoomed in photos on newegg or amazon listings
alright, thanks!
Hey everyone, quick question. Anyone know if I can replace the M.2 wifi card on this ASRock X570 Taichi? Like under the I/O board perhaps, I've read? I'm like done the install and realized this remains. Don't wanna start over if it's not possible. But if it's in there and can be swapped I'll have to ... any idea ?
secondary question >>> if i ignore the mobo pre installed m.2. wifi and install my own pcie wifi and put the antennas on that, will that work ??
why would it not? (work with an extra wifi card)
and why would you want to replace it?
running linux. new install. i've had a rough time with proprietary wifi drivers on a laptop with linux-- which, granted, was a broadcom mac, which are picky-- so i got an open source card for this new desktop. but it comes with an intel m.2. wifi preinstalled in the I/O board. i could take it apart and replace it but if I can just use the pcie for this open one, and ignore the other, seems easier at this point.
i guess i can just select which to use and it should be fine. wondered if anyone had any extra advice though
anyway thanks--
Is there a Big difference in between the hundreds place in ram? (3200 vs 3600)
I need some help boys
I need some help boys
@spiral bane >:) what
just ask question, if someone know they will pop in 🙂
I need to replace my motherboard on my system and unsure how to choose a compatible one
Processor is i5-3470 and memory is 2x4GB DDR3
@small belfry you'll need an H77, Z75, or Z77 motherboard to go with it.
supposedly the H61 and Z67 boards work with them, but some of them require bios updates, but most of them should, by now, already have that done.
Has anyone used Thermal Grizzly's Conductonaut on a R9 3900X?
My little brother needs a new mobo. Sound doesn't work.
We've tried plugging in different speakers.
Plugging in different usb headsets.
Even plugged an HDMI to the GPU to a TV.
No sound no matter what.
So what's a good mobo/cpu combination for about or around $200?
Well did you download audio drivers?
Yeah. And honestly, they were working before. I don't know what he did that they stopped working.
So we decided it'd just be easier to replace the motherboard.
hey does anyone know what will happen if i use a 2700x with an auoros b550m pro?
If I remember correctly it isn’t compatible
I got 1x16GB stick of ram earlier, and I'm pretty happy with it.
You arent getting double data rate or whatever its called with one stick. Your leaving performance on the table
i3-10100 good qith gtx 1070??
i was just curious what is the general rank of the 10600k compared to a 3700x
So I was wondering if it is possible to convert a usb on board to take a usb c with some type of adapter? Appreciate if anyone might have an anwer (I assume there will be lose in speed from not using a straight front usb c connector)
something like this?
Amazon.com: LINKUP - USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key 20 Pin Female Header Active Converter for Type C Panel Mount Adapter: Electronics
USB-C front panel into USB 3.1 MB header?
important note:
*** Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components. Devices such as iPad Pro and other tablets should not be charged through this port.
I was worried that it might be an issue but wasnt sure what the adapter would be so I was going to do some research with the link you sent
I also seen some pcie adaptrs that also have a usb c plug for front io
yes, you can use those too
those can probably do a full 10GB if you find the right one
the one you send was what I wanted to know if it was a thing an maybe the 3.0 to 3.1 would work or not
appreciate the information
anyone here have a lot of experience with X58 setups? running into some technical issues with a build and all my google troubleshooting hasn't helped
@mild jackal have an asus x370 board running a 3600 at 1.406v
at least according to the bios
is that 👍 or 👎
normal, assuming you haven't touched vcore settings
ok just checking
It could/should idle at 1.5v even
should i buy an x570 or b550 board soon? will the prices go up bc of the zen 3 launch??
Turns out a 10400 puts out a hell of a lot less heat than a 10700.
what do you guys think:
intel i9 9700k
Z390 nzxt
16 gb ram 3200MHz
amd 7 3700x
gigabyte x570i auros pro wifi
16 gb ram 3200MHz
NZXT made some trash motherboards.
wew thats why i havent heard of them xD
@naive pendant main question is, when are you building, and what is the overall budget?
also i9 9700k is hard to exist
I mean, the NZXT motherboards are just like their cases, looks good, but ain't so good inside, I hear about a lot of bios issues, and how the bios is really bare.
netherland
gonna try nl.pcpartpicker.com
if it doesn't work well, de.amazon.com should ship to netherlands too.
@naive pendant how much storage do you think you need?
1tb ssd
What kind of 3d modeling program? Is it like blender that's more reliant on GPU, or something that's more reliant on CPU?
solidworks
@naive pendant do you use solidworks visualize or no?
yes
@naive pendant revision 1:
https://nl.pcpartpicker.com/list/PV9YTJ
Not too sure what to do with GPU, some room is still left in budget if needed
2060 ko has some godly workstation performance in some tasks
and the 2070 is that more for gaming or would it also help a bit
The 2060 ko is a special case
take a look at this video when you have time
https://www.youtube.com/watch?v=mUFRBnJdx3Y
We discovered something that slipped past NVIDIA and EVGA alike: The RTX 2060 KO performs 26% to 47% better than a normal 2060 in some applications.
Sponsor: Get Linode Cloud Computing (https://geni.us/NehI9e - code GNEXUS20 for $20 credit)
It's not just that TU-104-150 is no...
the Nvidia RTX 2070 would perform better than the RTX 2060 in everything. But the RTX 2060 ko is an interesting case of a cut-down 2080 die, so the 2060 ko would likely do better in workstation tasks than the 2070, but still worse in gaming.
oke and the 2070 is that oke because i also wanna game on it
the 2060 is still good in gaming btw.
But yea, 2070 is better, the budget should allow you to get a 2070 super.
...why the changed motherboard, ram, ssd, and case?
because i like little cases and the motherboard doesn't go higher than 3200 mhz
?
it does..?
3600mhz cl16 is optimal for Ryzen
I'll pull up the mobo page even
that is a other than you put in the build
?
@quaint current gib good itx cases
and the SSD, sx8200 pro has like 50% higher read writes than the A2000 lol
oke i didn't know that
it's rated for 3500mbps/3000mbps on the sx8200 pro, 2200mbps/2000mbps on the A2000
yeah i didn't see that before thanks for that
what is mhm?
and how fast ram can you put in the x570 i pro wifi mini itx
From Gigabyte's website:
But 3600mhz cl16 is optimal for Ryzen
going higher frequencies have diminishing returns
oke and cl15 is that a no go or is it posible
expensive
no it is 70 euro for 3600mhz lc 15
well I'm not seeing it :P
you sure it's 3600mhz cl15 you're looking at, not 3200mhz cl15?
link it
can't send it it's a dutch site
send it without https://
xD
ohh sorry
oke didn't because on the bottum stood SPD-latentie thought that was the same
Well, SPD on that ram is 2133mhz cl15 lol
Ok so I've been using this board for around a year and a half which was when I first built my PC. It is an Asus ROG Strix Z390-e and the microphone will not work. Since I first built my PC the mic has never worked. Also the outlet that I use is grounded so I don't believe this is static. I believe this is an issue with the board for a few reasons.
Let me first explain what happens. When I open up the Sound menu on Windows (Windows 10 btw), the green bars will be at full then flash to nothing then full again very quickly when there is no sound that it would be receiving. It just repeatedly does that but for the most part it just stays at full input. It is a 3.5 mm jack mic but it is a working a mic since it works on other devices and I used another working mic and got the same result from the input with the green bars. I got some earbuds with a mic built in to them that are also 3.5 mm jack and the same things happen. I also used a set of Bluetooth headphones with a mic and the exact same thing happened. When I use it in discord on the voice playback option so that I can hear myself I hear a electronic buzz and it gets loud then quiet and just keeps doing that until it eventually stops receiving input. Another odd thing is that every application says the mic is working fine. Windows recognizes it as being fully functional, games like CS:GO say that it is working fine, and Discord detects it as being fine. I get the same thing from Skype as well. Another thing to note is that my headphones work perfectly and I have no issue hearing sound, just transmitting it.
As for what I have done to correct this is a couple of different things. First I wanted to rule out an issue with the case or any other connection port so I tried it on the case, directly into the board, into the monitor, as well as a Bluetooth mic. This all didn't work as I stated earlier. I have reinstalled Windows and there was no difference. I have reinstalled audio drivers and tried updating my drivers. I've done the enabling the mic thing in settings as well.
I'm not too sure what my next move is. I don't really know what else to do besides buy a sound card which is my current plan. I found one forum where two people claimed to have the same sort of issue and that was their solution. Also I would have nicer sound quality. My board has a three year warranty but I don't know if it is worth sending it back and have it ship for god only knows how long and hope the new one works and if I have to pay for shipping then it may be worth it at that point to get a soundcard.
Tell me your thoughts please or if you have had or heard of the problem I'm having and what was done to fix it.
where did you get audio drivers from?
windows
good
multi purpose minijacks generally dont work on pc
a soundcard wont "fix" the issue, it will replace the previous device
you split the signal for devices like that normally
so you can get a cheap soundcard, and just use that
ok
ive tried both
use the ones on the back for now
i do but it doesnt change anything
does your headset have one or two individual jacks?
ive got headphones and a mic seperate
so one connector has 2 plastic rings, and the other also has 2 plastic rings
and there is no additional usb plug coming off the headset
it isnt?
no i have headphones plus a seperate mic
same difference
oh
oh, so are you trying to use the seperate mic?
so there is an input and output line so i plug the headphones into the output and the mic into the input
what should i do
only plug in what you are using
i dont have the mic inh right now
so plug in the 3.5mm jack for the sound into the appropriate port
and leave the mic out
then
yeah
will there be b650 or new type of motherboards for amd 5000?
@trim geyser no, not that we are aware of at least
oh lets go
right click the speaker icon on the taskbar and click Sounds
then click the recording tab
then right click the box where the devices are listed and make sure its showing disabled and disconnected devices
yeah its showing them
@slow kernel i assume you have the standalone mic plugged into the pink port on the rear of the motherboard, and the headset input plugged into the green one
just making sure
yes
@trim geyser please keep random comments out of this channel, especially when someone is being helped.
ok sorry
@slow kernel how many devices do you see under the recording tab that are labeled "High Definition Audio Device" as the subheader
like that
3
the mic then the second mic and the two screw inthings
it sayd one mic is plugged in
ok one sec
he cant send a screen capture @main pulsar
oh crap
2sec
dm it to me?
ok
@urban ferry could you fix permissions for @slow kernel ?
or that
sure
thank you :)
youre welcome
❤️
winkey + shift +s = screen capture tool in windows
just ctrl + v what you mark with that directly in the chat :)
right click the default one and hit properties
ok
what does it list under jack information
rear panel 3.5 mm Jack and its the pink one
ok
then check the listen to this device checkbox
ok
like check through discord
yeah there is nothing
no not at all
no there is no glitchy thing right now
just nothing
like does it have a battery
no
no there is just the plug on the end that is 3.5 mm jack
ok
could a usb mic act different or probably not
a usb mic skips your sound chip altogether
i see
all the mic i have are 3.5 mm
ok
does the headset have any controls built into the cable or headset itself?
like mic or volume controls?
check for a mic mute button
when you say headset mic you mean the headphones and mic are on the same cord
like connect with the same cord
the headset has a mic built in
yeah
there is only one cable
nothing happens
