#cpus-mobo-and-memory
1 messages · Page 109 of 1
threadripper mobos be like that
Hello i need help finding the correct compatible processor to upgrade my computer
I have an SkyTech Azure - Gaming Computer PC Desktop – Ryzen 5 1600 6-Core 3.2 GHz, NVIDIA GeForce RTX 2060 6GB, 500G NVMe PCIe SSD, 16GB DDR4, AC WiFi, Windows 10 Home 64-bit (16GB Version), reference link and I would like to upgrade the processor probably to a rysen 7 o rysen 9 but idk which to buy since there are so many, I found the MoBo to be model ASRock A320M-HDV
@pulsar pilot I answered your question in 2 different chats
imo no
And that motherboard was only built for 1st gen Ryzen. You could do a BIOS flash and upgrade to a ryzen 2600 or 2700, but that's still barely worth it
for a good upgrade i would have to change the mobo?
@warped scroll or a good upgrade i would have to change the mobo?
technically you could, but i'd advise not putting a high power part in any a320 board, and a prebuilt usually means worse motherboards
ASUS TUF B450-Pro Gaming AM4
The odds of cramming 128gb ram in that board. Lol
@quaint current that motherboard seems to support up to 65w tdp, with a bios avaliable to support 3rd gen chips, so I'd slap in a 3600
yuh
but whats stopping you from putting a higher power chip in there? is there like a tdp limiter or something cause its kinda weird
eco mode slap a 3950x in there
lol
Has there been any problem with overheating on the MSI MPG X570 GAMING PLUS motherboard? considering getting it when it is a reasonable price again.
i mean like the VRMs
Yes
actually I'll have to take a look again
MSI X570 a-pro and X570 gaming edge wifi has vrm overheating issues
The gaming x is the one with hot vrms
I'll have to look for gaming plus
MSI gaming edge is probably the weakest x570 vrm, or close to it
thats why I'll have to look for gaming plus
Most people recommend the X570 asus TUF or aorus elite. $200 ish
yeah, i was thinking about the tuf board for a while
Forks, looking at the VRMs side by side, it's basically the same, so the issue on the gaming edge wifi might be the same on the gaming plus?
probably the case
Also, I believe the Asus X570-p is a pretty good board too..?
any major differences btwn the asus TUF (non-wifi) and the Asus X570-p?
I was looking for a larger M.2 SSD capacity drive from my 120GB, to a 1TBor a 500gb for the OS+games. On my motherboard (B450 Aorus M) in the specifications for storage
-[ 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) ]
Does this mean I could actually buy a NVMe-M.2 drive and have it work? It would run at PCIe 3.0 speeds, do I understand this correctly? Or do I continue shopping for a 1TB M.2 M-key SATA SSD. I'm new to this type of upgrading storage shopping, but I gotta start sometime. :)
119$ MSRP for B550 motherboards, just announced
@pulsar pilot @warped scroll what's the mobo?
huh?
oh Jesus, it's an A320 prebuilt? KILL IT WITH FIRE!!!
@warped scroll Old chat up the stack, I'm just getting caught up
oh
@earnest pebble Yes, any NVMe PCIe 3.0 drives would work. A Team MP34 1tb would work nicely. (not sponsored)
https://www.amazon.com/dp/B07PHQ6Q1D
Yo I haven't really kept up with this new gen of CPUs and I might need to get a new . I currently have an i7-7700k and want to get something that will not hold my rtx 2060 back. It don't matter if I have to change to amd and get a new mobo.
I was currently looking at a R7 3700x with a msi edge wifi mobo
Eh in gaming 7700k should be fine for you for a while
wait tell next gen drops imo
corona making prices high
MSI x570 edge wifi is also a bad board, it has VRM heating issues.
Awesome, Thanks for that info @hollow thorn Buddy, you get the last slice of pizza tonight
That's the thing I just might need to get a new CPU since it might be broken I'm just waiting on new case to test it out
Accident happened and mobo plus CPU might be bad now
You can start a motherboard without a case
I have a msi z270 m7
I know that I just haven't tested it out
I've been just kinda lazy with it cuz of other stuff
This quick how-to shows how to jump-start a motherboard by bridging the power-on header, avoiding the need of a power button on the case.
Like our content? Please consider becoming our Patron to support us: http://www.patreon.com/gamersnexus
** Please like, comment, and subs...
you can test it pretty quickly
I'll probably get to it once new case gets here tomorrow
alright
So what might be a good pick up for CPU if mines done for??
Ryzen 3600/3700x, on either a good b450 or a reasonably priced x570 board
So aside from the msi edge wifi I was also looking at the Asus prime x570
What about the gigabyte b450m or the rog strix b450 f
Also Asus tuf gaming x570 plus. Those are the 5 mobos I was looking for if I need to change to amd
Ok thanks. So is there a reason to not go for Intel atm aside from higher prices?
motherboard prices
Hello Guy attempting my first build. Is the Ryzen 7 3700x and Asus B450 ROG Strix a good combo. I’m reading that you need to update the BIOS, or should I go for the x570
Some b450 and x470 motherboards is compatable with it out of the box
like the aorus pro wifi b450
and yes its a good combo
@wheat scaffold The b450-f ?
Its compatible out of the box
no need for falsh
@daring patio yes the b450-f
k
My motherboard is reading temps of 110+
any ideas?
everything else in the system isnt even at 50c
I think that my motherboard sensors must be broken somehow because i don't see how i could run my pc with actual temps that high
just recently I watched a showcase video on either a mobo, ram, or a gpu, which they explained a program would read 30 degrees higher than it was. I'm looking through history to try to find that exact one, What motherboard and which program are you using to read the temps?\
Its a oem part and I used occt and hwinfo to read temps
Found it, it was a Pauls Hardware video from May 1 2017 though, he mentioned atm, the 1500x and 1600x ryzen CPU were displaying 20 degree higher temps in the OS, but that's still really hot. so that's a really old video. not sure if I could link in this channel, so I'll make it separate. You might have found something similar, maybe it helps you narrow down a issue.
Oh ya you can't post links yet
I'll send it to you in a message incase
You can dm it to me
Sure
Here's the link
https://youtu.be/2yMLKcaFirw?t=170
How To Overclock Ryzen 5! My BASIC Guide for Beginners
⇨ Sponsor Link - Corsair Vengeance RGB DDR4: http://bit.ly/PHCorsairRGB2
Ryzen 5 1400, 1500X, 1600 and 1600X CPUs - ▼LINKS/TIMESTAMPS IN DESCRIPTION▼
CPUs
AMD Ryzen 5 1600X - http://amzn.to/2oBHAFW
AMD Ryzen 5 1600 w/Wra...
Maybe that might help finding a solution, Or you could cook some pizza rolls with it
Ok ill watch it tmr. I'm exhausted rn lol
Good luck with your space heater :)
Huh?
Wdym? @hollow thorn
Are you asking what those temps are? Because idk how to check that lol
Would you even be able to run the system at those temps tho?
I would imagine it would shut itself down
it throttled
120 deg c?
Hot vrm is mostly a long term reliability / parts /fire safety concern
225w is a pretty unrealistic load though ngl
How do I know that it actually is that hot tho and the sensor isn't wrong
Wdym?
I wasn't doing anything intensive at all
Literally just had chrome and discord open lol
Idk what those sensors in hwinfo are reading from
Also the rest of my system was at 50c
You can roughly calculate power dissipation in the VRM from CPU current draw + the specs on the mosfet/power stage's data sheet.
Just plug in the current load, switching frequency, etc
Uh ok
I'm really tired rn lol. You think you'll be around tmr to help me understand whats happening lol?
Probably, I'm sure GN has a bunch of vids on it
@mild jackal yea 225w is a hefty load, but that's on x570, so I was just comparing hefty load for a high end board vs hefty load for a lower end Intel board
Also if you find a link for the GN vid please share it :p
I'll go looking but I'd like to learn more about VRMs :D
Getting the Ryzen 9 3900x for my build looking for a good mother board for gaming that’s mid range price $200 to $400 any ideas?
That's not mid range xDDD
High end is 300$ usually
200$ USUALLY mid range
Asus prime x570-p should be 150$, whenever it's in stock
MSI x570 tomahawk wifi should be 220$, whenever it comes out
@crisp shore and high end wise, MSI X570 unify is neat.
~300$ usually
Shot I’ve been seeing some of the X570 at $500 600 range
those are the overkill boards, 99% of people dont have a good use case for them
or those are the ones that are low in stock and their price has risen
thats what happened to me and the b450 board i got
I plan on upgrading my CPU. I run multiple instances of the same application. Should I go for higher clock speed or more cores?
it depends on how many instances you are going to be running (the more you run, the higher the advantage for more cores will be), but i'd probably go with a ryzen 3700x/3900x or wait until the rumored refresh comes, they have decent clock speeds+ 8 or 12 cores for a pretty good value, and good IPC gains compared to last gen so they will perform better at the same clock speed
All I’m gonna be using mine for is gaming but I want to be able to run at full setting so I’m think Ryzen 9 3900x cpu with X570 crosshair board and 2070 super gpu
@crisp shore how expensive is corsshair?
$350
yeah i'd suggest getting a cheaper mobo if you havent already bought it, the cheapest crosshair i can find is like 380
Damn yea spend that money back into GPU
On amazon it’s about 350
It's so sad the cheapest good b450 board I recognize is 160$ pro carbon max wifi
Just don’t wanna get to much and the board not able to handle it
any x570/b550 board should be able to handle a 3950x even minus one or two
Cpu: Ryzen 9 3900x
Motherboard: ??
Rams: Corsair vengeance rgb pro 16gb
Hard drive: seagate sshd 2tb & wd blue ssd 500gb
Power supply: EVGA SuperNOVA 850 G5
Graphics card: Nvidia GeForce rtx 2070 super
Tower: full
That’s my build so far
@quaint current
have you bought anything yet?
No I’m just got it done about a week ago and now I was starting to watch prices
Complete in about a couple months gonna but the parts as I get the money and watch prices
Ehm don't do that, don't buy parts over time
for warranty
Didn’t think about that
It's best to buy everything at once, so when you finish building, you're still within the return period if anything was dead on arrival or anything
And also prices go down over time
yeah thats the more detailed explanation
if you can wait a little to buy everything, i'd wait for b550 and ryzen 3900xt to launch
The more you wait the better, and once you're done waiting, buy it all at once.
I’m not real computer smart just know alil about them and from some research I’ve done on what I wanna build
@quaint current stuff should release by black Friday right
That should be a good point to buy
Usually amazing deals
wait is there an actual time frame or just rumors
Ok yea it’ll take me about 3 months to get the money for all at once
Rumors but usually they release in around the same time frame
Y’all think I should go with the Samsung ssd instead of wd?
Also Corona passes over in a few months and prices return to somewhat normal, but black Friday should be good
Please don't xD
Samsung so God damn expensive
I saw a Samsung 500gb ssd for $180 on amazon
Yea, team MP34. Decently fast speeds, good dram cache, great controller, amazing the warrenty
Holy.
Crap
Mp34 1tb goes for 130$
thats like twice the price of a 970 evo, that shouldnt be a normal msrp
Yea
I’ll have to look into them then
Usually Samsung drives are expensive but not that expensive xDDD
Lemme find the SSD sheet brb
Idk could be cuz the corona making prices go up idk
samsung is like the big name brand, everybody knows them but they dont really make the best price/performance drives
@sharp blaze can u pin this
o
we in the wrong channel
Lolol
well its here now
Intender still pinned it lmao
yea but nobody actually moves the convo to other channels
move it elsewhere
But intender :((
than tag me to pin it
Lol
its already pinned :(
Ok it was the 1tb Samsun not the 500
I blame nachos :P
also imma sleep so yeah u help him thank
I'd much rather take a 130$ 1tb mp34 drive
I’ve looked at so many computer parts last couple weeks my eyes are crossing lol
What’s the best memory to get that can reach in the 4000s MHz and good latency 4x16
O yea I will just been a console gamer since for ever but been playing pc gaming for about 2 years now and going to get into building me on now
You watch much YouTube?
probably 3200cl14 b die kits
but 64gb is gonna be pretty hard to get 4000mhz with semi tight timings
Oh
and expensive
Nachos I'd say they'll get better luck on 3600cl16 b die
There is also 4000mhz cl16 kits that's expensive but eh
I’m catch some sleep got work in a few hrs but ima refresh my build and do some more research and add wat y’all were saying and get back on here hopefully y’all be on to check it out again
id assume not
@hollow thorn there is a lot less 3600cl16 16gb sticks than 3200cl14 :/
i thought they only made 8gb stick kits? @hollow thorn
@tulip raft no, 16-19-19-39 is djr/cjr
16-16-16-36 is b die, 16-18-18-38 might be b die
I bought a fish tank making a custom case to put in the fish tank got copper tubing with radiators and pump, using 3M liquid
@crisp shore air, much easier on first install imo
also thats why i like 3200cl14 more, if its cl14 its 99% going to be bdie
And could you send me a 4x16 that is b die
Ok Thats what I was thinking been eye balling the water builds tho they look bad ass
Example one, this is 2x16
https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232860
watercooling is 98.7% for the looks
Thanks a lot for all the help tho y’all helped me out a lot
What do you guys think of my cooling solution 😂
@tulip raft just... I would settle with 3600mhz, 4000mhz doesn't give you much...
I bought a fish tank making a custom case to put in the fish tank got copper tubing with radiators and pump, using 3M liquid
That’s what I’m doing for cooling going to be a fun project.
If you want to have fun overclocking, some good 3200mhz cl14 is very good for ram oc
o this is a nice kit https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232899? , people can get 3800cl16 stable with under 1.45V
🤔 its cheaper than urs
I was looking at my shopping cart and my dad was looking at a 500 dollar 2x8 ram
Lol
4600 c19 it was
Lmao
but we can all agree this is best ram https://www.newegg.com/team-16gb-288-pin-ddr4-sdram/p/N82E16820313712?
No
4133MHz 17-17-17-37 1.40v ez
Thetr was 4000cl14 ram iirc
I’m confused what to get with lmao
yeah those are at 1.5v tho, that was at 1.4
I’m going 10900K cpu pretty sure
There's no real reason for 3600mhz then
Like that flare x kit prob pretty good for fun OC
yuh
Is 10900K good cpu to get
Not for the price but
does micron make 16gb sticks with e die?
bruh lmao this dude had that teamgroup ram at 1.92v
I bought a fish tank making a custom case to put in the fish tank got copper tubing with radiators and pump, using 3M liquid
This is a good cooling right I’m taking all the heat sinks off
@quaint current you just reminded me why I can't go far with ram oc
kinda surprised he could actually get it to 4000cl17 tho on x299
Voltage was set on auto iirc XDDD
rip
If I do 1.36v I can prob get 16-18-18-36 stable
Because that's semi-stable but crashes semi often
Bit more voltage might do the trick
No one answered lmao
yus we talking about bad ram oc'ing
Like if you're taking all the heatsinks off
You better have waterblocks for all of it
Don't take off the vrm heatsink and leave it hanging xD
I’m not doing that for the ram
ram waterblocks are stupid
yeah
It’s going to be cooled either way by my liquid
like brUH
@quaint current my is going to be watercooled and not looking like that lmao
Copper tubes means no rgb liquid tho
Hey guys! So today had the chance to film and talk to DER8AUER about his incredible PC that is running here at Gamecom this year.
I didn´t have pro recording gear so the audio is.. SHIET... but hope you guys still pick up on some stuff and get to see his awesome build a bit. I...
That’s an example
Of what I’m doing
this is how ram and watercooling should go
Lol
@quaint current some trident z neos and the tubes go around it
That's what it should do
Like run the tubing to the res up then to the right and down
nah this is better
Lol
op res spot
What should I do a atx build or mini itx
matx is for the weak people that cant survive itx
eATX tho
Looking at this everyday until I get my new motherboard lmao
Actually we got it for 200
1tb?
Ye
Horrible pricing lmao
ThAtS sTiLl ExPeNsIvE -mr1
Anyways my dad is a fan boy for Samsung
also motherboard and case sizes are a lie
@quaint current eATX is just a lie
well yeah
its like the bootleg size
That’s pc I have rn lmao
OEM
that psu
I go now
2 Intel Xeon 2643 0s RTX 2070 Super 64 GB DDR3 1600 MHZ
But that flare kit I should get for ram
What mobos should i be looking out for for my 3850x when they restock next month?
also is the Gigabyte X570 Aorus Ultra good?
@quaint current I feel like bottom fan would need to be a Delta fan for the GPUs not to die
I purchased a set of 2 16gb Corsair Vengeance RGB Pro 3200mhz off of a seller on eBay and one of the sticks came DOA. I'm now looking for a replacement. Since 1 16gb stick is not offered, I was thinking of purchasing the 2x8gb and pairing it with the 1x16gb I currently have. However on the other hand I was looking at "GeIL SUPER LUCE RGB SYNC 16GB (2 x 8GB) DDR4 3200" which is at a super affordable deal right now. However I'm worried that using the GeIL will sacrifice some performance. Is this the case?
if the timing and CAS latency are the same, go with whichever one you want
Question, which dim sticks are recommended for r5 or r7
I wont be doing any oc. Just pure stock settings
with ryzen usually 3600mhz or above and a cas latency of 16 or lower
Ok thanks
One more question, any particular brand to stay clear of?
And the ones recommended
So if both sticks are DDR4-3200 PC4 25600, they are relatively the same? @naive pendant
g skill is pretty good. i can't think of any to stay away from off the top of my head
Okay. Cause the Corsair is $92, whereas the Geil is only about 63.
@midnight pollen ok thanks
yeah the geil is much cheap[er
you just wont get like icue integratiion
Just wanted to ensure I wasn't going to be forfeiting performance. Thanks man! I believe they have their own RGB program.
no prob
ASUS Aura Sync is what they're powered with
yeah
so if you have an asus mobo, you can connect dummy led strips to it to sync thosee and your ram
in the software
I don't, I have an x570 Aorus Elite, but thanks for the suggestion. Corsair's memory was working with RGBFusion, but I don't think these would, right?
im not sure about rgbfusion, i thought icue was proprietary, but these may work if you heard something about that
Alright. I guess my final question would be should I run dual channel with 1 16 & 1 8gb, or the two 8gb?
16 & 8 being different brands, but same speeds/timing
two 8g
Okay
not sure what you would run into with different density ram modules
Thanks for your help man
no problem
Question, can you add ur own m.2 heatsinks if mobo didn't feature any?
yep
Kl
you can if you want to but don't really need one unless some of the pcie 4.0 drives
Understood
i need help does this all look ok

is that bad
is that stock settings
i think
vid != vcore.
Also - use ryzen master or hwinfo64
Anyone else buy the 3300X?
I've already got a Z390 mobo, what cpu would u recommend?
what are you using it for and what's the budget?
looking to build a gaming pc and hoping to find a sweet spot in terms of price per perf.
graphics are rx 580 8gig i got for 90$
I was thinking 9600k or 8700k
dunno if anything can beat the z490 unify itx but it looks pretty nice
apart from the other two SATA cables that'd go over the RAM
looks like you can just bend the cable unless u have thicc ram
I mean ye, but would look out of place if you like dem looks
just bend it 180 ez
@charred venture i have a 9600K OC'd to 4.9 paired w/ a 2060 Super and loving it for my gaming
I was using a Corsair H100i 240mm which worked fine, now using a Silverstone 360mm bc my case will fit it
usually stayed low 70s, if i did torture in P95 it would jump to 88-90
like right now i am mostly around 35-40c, max temps have been 66-69
alright, will prob go for the h100i, ty for the advice
no prob
@quaint current was speaking more from a features and build standpoint rather than pure aesthetics but yeah
So im very confused from what I've read, So a mother board that I am getting for free with a i7-4790, the max memory that is labeled without (OC) next to it is 1600, can I put 2400mhz ddr3 in the mother board? and then overclock it to its potential?
Or do I have to use 1600 speed and overclock it then
I mean if the max memory is 1600, it means it'll only run at 1600
its locked
cant oc it if it's locked
where can i send pictures to show you what the discription sayus
if it says (OC) it usually means that's OCed above usual
LGA1150
Chipset: Intel Z97 Express
Memory: 2x DDR3-3000(OC)/ 2933(OC)/ 2800(OC)/ 2666(OC)/ 2600(OC)/ 2500(OC)/ 2400(OC)/ 2200(OC)/ 2133(OC)/ 2000(OC)/ 1866(OC)/ 1800(OC)/ 1600/ 1333 DIMM Slots, Dual Channel, Non-ECC, Max Capacity of 16GB
Slots: 1x PCI-Express 3.0 x16 Slot, 1x Mini PCI-Express Slot
SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10
Memory Support: 2 x DDR3 DIMM; MAX 16GB; Support for DDR3 1600/1333 MHz memory modules
Onboard graphics: 1 x DVI-I port,2 x HDMI ports, Support for up to 3 displays at the same time
LAN: 2 x Gbe LAN
Forgot I could just copy paste
So I would only be able to use 1600, thenOC it to a higher speed?
with Z97 I think you can get higher than 1600MHz
gigabyte z97n?
Hello, my friend is having an issue with a stripped screw on the nvme cover on his MB. Any advice?
replacement screw
but how to take it off
Yeah
take the mobo out and wack a rod through it really hard
Thinking that's not helpful
It's a pretty nice MB though, and I'd rather not see it break
yeah its not really easy to get a stripped screw out
get some pliers and try to twist it out
There's no way to get to the sides
there is
It's recessed
remove the board
damn
Yeah
yikes
Thanks @split copper
yw^^
It's a brand new MB, so currently our best plan is to do an RMA.
sounds good
Hopefully they have some in stock. It's an AMD motherboard 🙄
idk if they will let you RMA over a stripped screw
get a bunch of flatheads, the best part of flatheads is that they are super useful for everything else besides using them for their intended purpose
Yeah. Asus said it would be borderline, but amazon looks like they're okay with it
ASUS TUF B450-Pro Gaming AM4
Delivered today 
Good board 👍
When will more PCIe 4.0 boards come out? Closer to the 3000 series release?
B550 mother boards will support pcie 4, not sure when intel will be getting them
Why's that?
Why not?
Nvidia is using amd chips in their 3000 gen compute servers
The latest amd chips have better single core performance now too
amd slaughters 9700k
The new ones are the 3600xt, 3800xt, and 3900xt
really? Ill look up bench marks. how much is the 3800xt?
No clue. They're not on the shelves yet. Likely around 300-350 though
oh so there like not even out yet? There new line of cards?
8 core 8 thread on the 9700k?
Yeah. Likely fall or so
hmmm. yeah i may be switching to amd. We will see
Yeah 🙂
intel's going to be catching up for a bit
3800 also has twice the thread count
the 3800x that's out now also has better performance
huh. And these are not out yet?/
3800xt is not out, 3800x is
The xt ones aren't yet. They just showed up in the benchmarks this morning
I bit more expensive I think
hmm. well when is comes out, i may have to get one. Or i will just pick this one up
9700k is also last gen, and 3700x better value than 3800x (just lose a little clock speed)
Yeah 3800x is on sale for 335 right now though
should I wait for the xt then? cuz im waiting for the 3070 anyways
If you're waiting for the 3070, might as well wait for the 3800xt
Or even 4800x if it's out
3700x is 275 on amazon rn its a killer deal
Dang, yeah that's good
How much is the 4800xt supposed to be?
4800xt may not happen
Im waiting till september do do my build so i can get everything at once
well then ill do the 3800xt
4800x will be somewhere between 200 and 600
4800xt is next gen and they havent said anything about refreshing it bc its not out yet
4800xt is refreshed next gen too 🙂
yuh
I want to see what that's like
You see the speculations that next gen will be on 5nm?
but were still on normal third gen so thats going to be at least a year or two
yeah. well i may be going to amd then this time around
Yeah. AMD's on the up swing. Give intel two or three years and they should be on the top again
x570 is out and already has pcie 4
actually yeah your right. I saw that the other day. forgot about that
b550 will be out soon, but for the 3800xt probably would want the x570 mb
aight sweet
eh i'd say b550 will be fine for any of the new cpus, the real factor will be cost
whats the cost differnece
Maybe 50-100 based on the difference between b450 and x470
ah ok
When is the release date for i9 10900k?
I thought it already released
Hey, I'm looking at my Mobo options. I have a fan that will block the top PCIe slot on this board: PRIME TRX40-PRO sTRX4 AMD
Can I use the other 2? Shouldn't be a problem right? Says they're the same kind
@arctic vault it's already released, good luck finding it in stock though
@rocky edge It's usually considered best practice to use the top most slots, but the other two slots should work as well. You might run into higher latency, but it shouldn't be too bad
top pcie slot usually has more bandwidth
sTRX4 should be able to serve full bandwidth to all of them. I'll check though
Which threadripper do you have @rocky edge?
it should be fine
Just checked. All the slots have full bandwidth as long as the CPU has enough PCIe lines
what the hell
@digital kernel it would be the 3960x (Don't have it yet) and the fan I have is the be quiet dark rock pro tr4
And thank you for looking at that, I'd thought the top slot was best, but wanted to check.
if ur gaming 10600k
@quaint current not just gaming
10700k/10900k arent really good choices for the price, so probably 3900x
or 3950x if you really need the cores
When is the 3900XT out?
My Fish Tank Cooling is going to be finished in a week oof
I might go with the 3950X
Either way I won’t ever get my hands on 10900K
lol
Rip
If you have $700 dollars, you can get the 3950x at the prices it's at right now
Ye
f
How do y’all become a techie
be at least slightly okay
I'm not convinced of this criteria
Alright so I got a budget of like up to $200 for an AMD processor. I currently am looking at getting the 3300x but am looking for thoughts on that
3300x is solid. What are you looking to do with it @light delta?
Just gaming really
3300x is a great budget gaming cpu
Awesome also is it still preorder? Right now its been shown as out of stock and others have said its preorder still
Could be. It's still brand new
its brand new so it has low stock+ high demand https://www.bhphotovideo.com/c/product/1558666-REG/amd_ryzen_3_3300x_quad_core.html
b+h says "new item-coming soon"
Alright do you guys recommend getting it from BH or Newegg? BH is cheaper but tbh I trust newegg a lot more because I've never heard of bh
b+h is a trustworthy store, they just dont have as much items or stock as newegg
they do a lot of photo and video stuff also
Ah ok I've just never heard of them so I was a bit skeptical
But thank you you guys are great
yeah they have some pretty good sales once and again, but with all the other 3300x's at $200 its the only good place to buy
Alright I'll try and order it once it's out thanks again
hi im having a problem with my mobo, when i try to boot the computer with a dp cord it shows a white error light on my mobo, but when i use an hdmi cord itm runs perfectly fine
What motherboard+cpu?
is the z390 a pro from msi, compatible with the h510i
and how would i know if a certain mobo is compatible with a case?
it is its just a standard atx size
yeah just slightly smaller
hmm alright
thanks
do you think there would be any issues with installing the mobo?
from a mobo standpoint they're the same, the case size is the only difference
oh ok
any case labeled atx, be it mid tower, full tower, etc, will all fit an atx board, and most atx cases can also fit micro-atx boards as well
so unless you're trying to pair a mini-atx board with an atx case, or using something like an e-atx board, you shouldn't have to worry too much about mobo-case compatibility
Let's overclock a AMD FX-9590
Yes
you guys think i should get the 9600k over the 9400f?
rn 9600k is 200 and the 9400f is 170
is the extra 30 dollars worth it?
anyone know where i can get the 10900k rn at retail lol
...
Does Newegg not have it?
no sadly
its sold out everywhere bc its new
Dang
any idea when itll be bacck in stock
@polar fern I'm assuming you're upgrading?
@polar fern if it were me I would go w/ the 9600K over the 9400f... 9600K comes w/ an integrated GPU and the 9400F does not (in case you need it in case of emergency); The 9600K is able to be OC'd if you're into that and the 9400F is not; 3.7GHz vs 2.9GHz... just my take
are the ryzen xt cpus coming in july?
Thought i read that but i didnt knp
wknow
know
That's the best guess. Haven't seen anything official though
ok. hope there not to expensive
Probably about the same price as they're non xt counterparts, plus a few dozen bucks
Oh ok. good. I havent looked at benchmarks or anything, but how much more powerful will they be vs the non xt ones
They beat out intel's 10900k on all tests
yuh 7/7 is the rumored launch date
Including single threaded
Um, no im not upgrading im actually planning on building my first pc
I bought a laptop and regret it so much
I don't understand when people get all hyped over controlled environment benchmarks instead of just waiting for actual real world comparisons and reviews.
oh
@polar fern are you going intel just because or what??
its a more expensive platform without much to offer from a price to performance standpoint
amd is completely blowing them out of the water rn in terms of everything including the chips coming out in July
im going intel since the 9600k is on sale rn
its 200
would you reccomend an amd processor over the 9600k?
recommend*
@gritty patio
@polar fern whats the goal for the pc?
Hardcore gaming
I just realized the ryzen 5 3600 was actually 167
and it’s the same so I might go with that
Kinda the same performance wise*
@deep vigil
@polar fern if you want to game more go with a 3600 and put more into gpu
about half of total budget should be gpu
unless budget system
@deep vigil ima pair it with a 1660 super
yeah do that @polar fern
idk why'd u go intel lmao
especially last gen with fewer cores
plus the 3600 is the cheapest i've ever seen it
and it also depends on where you're buying it from as well
go newegg if u want the game pass
go amazon if you want the cheapest
and i have a way to make it even cheaper if the promo still works
and what 1660S exactly?
oh the one i recommended earlier lmao
yeah that card is cute
do you have a build yet or nah?
@polar fern
you're going more midrange right?
so i'm pretty briefed on what i think ur trying to get at
lmao i havent gotten my parts yet
and i went a slightly cheaper route as well
monitor included?
yes
peripherals as well?
yea
damn
yeah thats something to work with if you were building with that 3600
cause another ryzen chip comes out in a couple of days which i managed to pre-order and it performs the same if not better in some games as the 3600
but its like $40 less
the ryzen 3 3300X
it just has 2 less cores
isnt more cores better?
and do you know if the ryzen 3600 comes with a stock cooler?
but most games hardly utilize all the cores
ah ok
and yes the stock cooler is fine if you're not overclocking
yeah there's a lot learning involved to get a nice price
if you're strictly gaming then the 3300X is a great option
but if you want "futureproof" yourself i'd go with the 3600
i found a bundle rn tho and its 15 bucks off
you seem to have a little more in your budget than i did in mine
with mobo, ram, and 3600
b450M DS3H
pls
of that gigbyte mb?
yes
oo ok
wait why
I could save a lot more huh
alright
i can get you a good deal on the 3600 i think
like $15 off
from the one on amazon if you're going to order it off of there
also
its on newegg too
yeah but i cant get an extra $15 off on newegg
if you want the game pass they offer on newegg
then by all means order it off of there
but if you dont care then i may be able to get the deal for you
also
im trying to save money rn so the deal is good
yeah
i was thinking ab that too whenever i wanted to go micro atx as well
nice cases
yep they are pretty cheap to i believe
honestly performance over anything and if its cheaper
okok
also
3200 ram isnt much off from 3600 in terms of performance based on what i've seen
so it'll save you like $10 or more
im gonna try to run a lot of games on high settings tho
wouldn't the speed help with stability
just pop out a little more frames based what i know
but i'll put 3600
instead of the 3200
ah ok
yeah its 3600 is a little over priced rn so a little more money is going towards that
hmm how much more?
like $12 more
ah alright
and you said 1660Super right?
yes
okok thx
that gigabyte one is of better quality than the lower budget options
the 75 dollar one?
nvme one would be the better one huh
but the differences aren't night and day
well the gigabyte one in the bundle actually has an nvme slot
i didn't know that lul
so imma change it to that unless you want this one
imma link
ok
what issues?
wait nvm
dont click that
here this should be what i just put together
on the bottom it'll say the issues
that mb i put actually comes with 2 nvme slots
yooo thats good
the only primary issue would be the bios no?
most of the newer ones ship with it already flashed
wdym
this website isn't exactly up to date all the time
aw ok
so why wouldn't i be able to use it then?
or that's what the box says lmoa
the second nvme slot shares bandwidth with one of the sata ports
so you could either use the sata port which would disable the second nvme
or vice versa
id probably only use the hdd tho
yeah if you dont plan on using the second nvme slot you'll be fine
hmm so other than that this is a pretty solid build
easily
fitting a monitor and the rest in is the easiest part
just depends on what you're looking for
hey bro, so do all of the 3600s come with a stock cooler?
or do some come sold seperately
thats good
hmm ill just have to wait and see i guess
its already applied onto the bottom of the cooler so make sure not to touch it or set it down anywhere unless its on the cpu
alrighty
also heres how to get the $15 credit on amazon
if it still works
i used it a couple of days ago and it worked for me
thanks
the credit wont be applied automatically tho
and would there be any other issues in the build?
so you may have to wait a day or 2
not that i can see
and pc part pickers says nothing
you'll just need some fans
how do i know which fans to get?
and i also made sure the case had a front mech panel for easy airflow
idk how many that case comes with
lemme see
" Upgrading the BIOS may require a different CPU that is supported by older BIOS revisions."
that seems like a huge issue
i believe thats for older chips not newer ones
i can check hol up
and you'll prolly need 4 or 5 fans
three intake and 1 or 2 for exhaust
yes
so on pc picker, on the bottom it says order from amazon, would i have to order newegg completely 1 by 1?
also im reading that the newer ones come with a sticker on the box indicating ryzen 3000 series ready out of the box
shouldnt be
epic
i bought the same mb but just the atx version and it came with a sticker
yeah
you'll have to order the parts yourself and go to the websites wherever they're in stock at
ah ok
yeah
for the fans you got any ideas which ones to get
i've been planning my build and slowly buying it since march so i've learned a thing or 2
uhmm no clue
ah ok ive been planning on building one but never actually bought anything
i was going to buy this cheap 5 pack but i opted for a case that included fans
hmm ok
yeah im pretty sure it will
im just waiting on my cpu and case at this point
you gonna get a mechanical keyboard or nah?
yeah it was hard finding a nice white one that wasnt overpriced
okko
yeah also psu are wayyy up on their price as well
i was lucky enough to buy a pretty beefy one at a rather "great price"
i found a 600watt from thermaltake for 65
its on sale doe
so i gotta buy it pretty quickly
make sure it has good reviews
same
but ended up getting my parts for really good prices imo
mine was an overpriced laptop
rip
yup
i couldnt bring myself to buy a laptop
thought it was good and realized dell finessed me
yea i cant upgrade anything

