voron_2_help_forum_public
Stealthburner: Fan speed coupled or decoupled for PLA and PETG?
Tuning
Initial setup
Starting to build my new Kit soon - with outdated printed parts
Kits/parts advice
Squeaking Stepper motor in one of the A/B belt
Mechanical
#help_end stop Z still triggered after retract
Z Offset
Configuration
MCU 'mcu' shutdown: Timer too close
Printer shutdown
MGN9 guides missing from LDO Kit
Kits/parts advice
Just Starting My Voron 2.4 Build With Parts From 2021 BOM Purchase
Kits/parts advice
Initial setup
New Voron 2.4 build choose control board
Electronics & wiring
z wobble?
Tuning
Print Dimensions accuracy
Tuning
Mechanical
Initial setup
Right half of print fails.
Electronics & wiring
Over-extrusion issues
Tuning
Mechanical
conection usb error fly piv2 & spider 3.0
Initial setup
Electronics & wiring
Configuration
extruder rotation distance really low
Tuning
Mechanical
why does my printer stop extruding filament mid print?
Mechanical
MCU overload
Printer shutdown
Input Shaper Results
Tuning
circles
Tuning
stealthburner logo neopixel working fine, the nozzle neopixels don't work at all.
Electronics & wiring
Gantry Question
Initial setup
lack of space behind print bed for nozzle scrub mod
Mechanical
Configuration
cristal thermistor
Kits/parts advice
Y endstop position doesnt make sense
Mechanical
Major Layer Shift
Mechanical
2.4r2 skew on both XY and uneven travel on Z
Initial setup
reverse bowden tubing help
Configuration
Quad always leveling crooked
QGL
X gantry not level with rest of printer, toolhead angled down slightly
Mechanical
Issues with X and Y endstops LDO Kit Rev C
Initial setup
Electronics & wiring
Communication timeout during homing probe
Tap
Printer shutdown
Electronics & wiring
extruder motor vibrating only
Mechanical
Electronics & wiring
wiring the v2.4 cbt kit
Electronics & wiring
[Solved]Quad level failed
QGL
First layer inconsistency with bed mesh
Bed mesh issue
Something goes wrong when go to 25,25
Initial setup
Solved
Buzzing before homing
Configuration
Racking issue
Mechanical
print via usb
Configuration
Stealthburner strangling noises
Mechanical
Initial setup
build plate placement
Mechanical
Changing Z-Offset has no effect on first layer after KAMP adaptive mesh
Bed mesh issue
Solved
liquids!!!!
Initial setup
Homing issues
Kits/parts advice
Configuration
Input Shaper Results
Tuning
What can cause this kind of mesh?
Bed mesh issue
Z Offset
Tuning
Octopus board issue
Electronics & wiring
None of my Endstops or Probe trigger
Configuration
Quad Gantry Leveling
QGL
Unable to read tmc uart 'stepper_x' register IFCNT
Initial setup
Voron 2.4r2 Z drift or inconsistent
Z Offset
Tap
QGL
Configuration