👽︱game-support

[autumn agate]

u need latest version

becuz u have old one

those are the latest

and i think u need use 1.16.5 version becuz those versions are for 1.16.4 but i think it will work

if u update to latest version

[fast peak]

but can u send me a link for this mod ?

so in which version i need to select ?

[autumn agate]

oh its done modpack

[wind bone]

how do i download 1.18 curseforge version to play it on minecraft

[fast peak]

which version i need to select ?

[wind bone]

i only have the 1.16.5 version and i downloaded mods from the website for version 1.18 i have curseforge installed on my pc but i deleted all the mods there

[fast peak]

.

help /\

[wild jewel]

Again, stop with the impatience!
Last warning.
I will ban you

[fast peak]

ok

[wild jewel]

Close curseforge, start it again, should update itself

[wind bone]

i just made a profile with version 1.18 and im good i think launching it now

[fast peak]

but which version i need to select ?

[wind bone]

nvm

it says game crashed

[wild jewel]

!projectissue

[golden musk]

Please visit the project page for the content you posted about and look for a way to contact the developer.
Somewhere on the page there is usually a method of contact. Look for one of the following things:

• Issues tab like the image below.
• Discord link.
• Twitter link.
• Comments section below the project.

If no contact method exists you will either have to remove the project or find a solution on your own.

[wind bone]

exit code 0

whats that

it says that when i try to launch the version

[wild jewel]

Useless error code, need to read the logs to say what is wrong

[wind bone]

there isnt one

is there something im doing wrong

[cerulean kite]

Can someone help me with this pease?
i did what i could

Latest log ^^^^^

Im not very good at reading these

[coarse nest]

Is there a crash report?

[cerulean kite]

yess

[coarse nest]

Can you send that cause fabric doesn't append it to the log like forge does

[cerulean kite]

wait

no

i thought i saw the crash report

theres only the latest log

[coarse nest]

Ah.
It seems cardinal components is conflicting with smthn

[cerulean kite]

i'll try to disable it

nope

still crashes with error code 0

The latest log ^^^^

[coarse nest]

Levelz and taxfreeelevels are conflicting

Remove one

[keen matrix]

i am dumb it was refabslab

it was messing with slab helper

and vise versa

[glacial cave]

hey so Im trying to download valhelsia three, and the memory heap increases quite a bit, says "not responding" (attached) and then restarts the heap

[coarse nest]

That is expected while loading large modpacks

Also that is loading the modpack, not downloading

[glacial cave]

my bad

do I just wait?

[coarse nest]

Yep. Allocating more ram can help (see below), but it will still take a while to boot. Optifine also increases boot times by a lot if you have it in the mods folder.

!mc-ram

[golden musk]

How to set Global Minecraft RAM value.

1. Click the icon in the bottom left to open settings.
2. Click the Minecraft tab.
3. Scroll down.
4. Slide slider to recommended ram range as seen below.

[glacial cave]

tysm

[keen matrix]

i am having problems with trying to join my world in single player

its custom

fabric

and i get booted cause it says connection lost

i will try to increase the ram allocated because i did see an error with the allocated ram

if this doesnt work i will post logs

it didnt seem to work posting logs

[last parcel]

java.lang.RuntimeException: Tried to read NBT tag that was too big; tried to allocate: 2097184bytes where max allowed: 2097152
    at net.minecraft.class_2505.method_10623(class_2505.java:21) ~[intermediary-1.17.1.jar:?]```

report to intermediary

[keen matrix]

oh so its a bug with a mod?

[last parcel]

yup

[keen matrix]

ok

i like ur pfp

thanks

[mental schooner]

how to install worlds in aternos ?/ pls help

[keen matrix]

is this the architechtury mod?

[last parcel]

intermediary-1.17.1.jar

[keen matrix]

i dont have that mod installed

[last parcel]

no idea then if it's not that

[keen matrix]

ill install attribute fix

see if that changes anything

[glacial cave]

will this happen everytime?

[keen matrix]

if you are using forge most probably

[keen matrix]

it didnt ;-;

[last parcel]

not sure why you thought it would tbh

[keen matrix]

well attribute fix changes the max nbt data and stuff like that

im also pulling at strings

[last parcel]

remove mods until you figure out which it was

[keen matrix]

yep thank you

im gonna talk to u in off topic general is that alr yamza?

[last parcel]

sure

[keen matrix]

thanks

[tame gate]

why is thermal expansion causing this problem

[last parcel]

seems like a question for thermal expansion devs

[distant wing]

Sorry that was my grandpa

[eager falcon]

thank you mods👍

[distant wing]

i deleted my grandpas message

[coral raft]

Hello. I put together a modpack and noticed that the render distance affects how smoothly mobs move. At a render distance above 16, the mobs start to hang extremely, for example to stop in the air. Is there a way to fix this? Have already assigned Minecraft 16GB ram.

[acoustic idol]

More ram isnt always better. Can actually do the opposite when you allocate too much. 6-8gb is usually enough for most modpacks. I would start there for ram. As for the render distance. Other things come into play like cpu and graphics card. Your pc may nit be able to handle a render of that far. Try lowering it

[coral raft]

I have a pretty good PC and the modpack only runs on a minimum of 7GB of ram. If I award 8GB, it is extremely lagged because the RAM is fully utilized. I have now lowered the render distance. Most of the time, only mobs from other mods are lagging in the air.

Maybe I should delete a few mods that add too many animals.

[acoustic idol]

Every pc handles packs differently, there are a few factors that come into play when it comes to game play, ram, cpu, is it using an onboard gpu or or a card.

[coral raft]

I have 32GB of Ram in total, no integrated graphics unit. I just think it's because too much Ai needs to be loaded.

[acoustic idol]

its possible

[coral raft]

Or the mobs are not well coded.

Then I'll test all 200 mods individually xD

Fair enough. It could also be because there are too many mods.

[cyan yacht]

guys i need some help
mineshafts and monsters keeps lagging at every second interval when i load into a world
how do
i fix this

[last parcel]

told you what to do, you still havent done it

[cyan yacht]

f3 doesnt take a screenshot f2 does

and again its not the world gen

[last parcel]

ok argue instead

[cyan yacht]

fine then

[acoustic idol]

Yamza wants to see the debug screen, Its a way for us to check some ingame info / help

[cyan yacht]

ojh

i read it wrong

so sorry

you meant take a screenshot of f3

[acoustic idol]

Thats what was asked, Press F3 and take a screen shot

[cyan yacht]

uh problem

i cant click the chat png because of the lag

[acoustic idol]

Take a none minecraft screenshot then.

Or just go to the screen shot folder

[cyan yacht]

i tried

[acoustic idol]

tried both?

[cyan yacht]

but i dont think this will help

[last parcel]

sure it will, as i can now see that your ram allocation is likely insufficient and needs to be increaded

!mc-ram

[golden musk]

How to set Global Minecraft RAM value.

1. Click the icon in the bottom left to open settings.
2. Click the Minecraft tab.
3. Scroll down.
4. Slide slider to recommended ram range as seen below.

[cyan yacht]

so do i just move the slider

i have somewhere around 12 gb

[last parcel]

set it to 6gb and see if that helps

[cyan yacht]

k

thanks alot

one more thing

will it work better if i turn the slider all the way up

[last parcel]

more likely it will crash your pc

[cyan yacht]

oh

i was asking becuase i was going to use texture packs and shaders in it

[last parcel]

you may need to set more ram then, but you really dont want to set it higher than 10gb if your max is 12, else your computer wont have enough to run

[cyan yacht]

hold on

nvm my ram is 16 so ill try 10 then

thanks again

[cyan yacht]

the game just crashed but there was no lag or anything i was standing in a field being afk and came back then it just alt f4 itself
no boss or anything
just me and grass

it did it again

[fast peak]

why i need to go and watch are the issues?

[wild jewel]

Modpack is broken, developer should know about it

[fast peak]

the insansecraft modpack is broken ?

[cyan yacht]

i changed the ram used and now it took 10 minutes

[acoustic idol]

!mc-logs do this please Bimzo

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[celest geyser]

here

[acoustic idol]

Did you add, remove or change anything in the pack?

[celest geyser]

nope

[acoustic idol]

!mc-installfix try this

[golden musk]

1. Click on the Minecraft Tab on the Left side of the CurseForge App.
2. Click button next to the Create Custom Profile option.
3. Click Repair Installation option.
4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

[celest geyser]

still dosent work 😕

[acoustic idol]

post new latest log

[wild jewel]

That is what your error showed, unless you added that mod yourself, then you just remove it

[fast peak]

ok...

[acoustic idol]

Back up any worlds you wish to keep > then reinstall the pack.

[celest geyser]

ive already tried that

[acoustic idol]

Has this pack worked before? OR is this the first time

[celest geyser]

ive played it years ago where it worked with no problems

[acoustic idol]

Ill see if it works on my end

[celest geyser]

it works for my two friends

[acoustic idol]

Try the repair installation again, as soon as it is done reboot your pc

[celest geyser]

didnt work

[primal raven]

how do I add an op in the server properties?

[wild jewel]

In the console: op <username>

[primal raven]

I mean in the file "op"

[wild jewel]

Just use the console?

[primal raven]

we dont have one?

[wild jewel]

Then how do you stop the server?

[primal raven]

via website

[wild jewel]

Do you have a log there?

[primal raven]

do you know how I add an op via this or not?

[acoustic idol]

Only other thing I can think of is trying a new path for the app OR trying the FTb launcher for ftb packs

[wild jewel]

No, if your server host doesn't allow you to run commands then you should ask them about it.
All hosts give access to logs and commands, impossible to run the server without them

[primal raven]

just answer my question

[wild jewel]

I just did

[primal raven]

?

[last parcel]

With the console yes. If you need the correct formatting for the file make a server on your PC and add op from the console as said and copy it

[wild jewel]

My first word was "no"

[primal raven]

very well then

but yes, I have a log file

[wild jewel]

Check with your host how to run commands, you need it

[dawn pulsar]

can someone help

[autumn agate]

is there a mod related to jei for 1.18

jei isnt in 1.18

so i need a mod like it

[quick stirrup]

@autumn agate try rei

[autumn agate]

full name?

[halcyon rapids]

RoughlyEnoughItems

[autumn agate]

its stuck on getting file from the curseforge download

is rei pretty much jei without mod recipes?

[light karma]

can anyone help me https://mclo.gs/I739vy2

[last parcel]

woh, that's neat. did it actually make 100 crash logs?

[light karma]

no one run

the server cannot load chunks

idk why

[last parcel]

how did you get to this point

[light karma]

i pregenerated a 1.18 world and pastet in a 1.16.5 server

[last parcel]

well that makes sense why it wouldnt work..

[light karma]

huh?

[last parcel]

worlds are not backword compatible

[light karma]

i know from some ytber project that they have 1.18 world gen in 1.17.1

[last parcel]

so ask them what they did. what you are doing is not it

[halcyon rapids]

1.17 had the datapack thing with newer world gen

[autumn agate]

doesnt crayfish's furniture have lights n stuff

[dawn pulsar]

can someone please help me it keeps crashing

[cunning frost]

why does this mod struggle to load in my modpack when this is the same mod in better mc plus at the latest forge version for 1.16.5

[last parcel]

looks like you need to report this to
Mod File: Aquamirae 2.0 (1.16.5).jar

[cunning frost]

ok i adjusted it to v1.1 along with its library it needs

the server works fine

but running the modpack itself isnt working

[subtle ibex]

i need help running the insanecarft server

i downloaded the file from curseforge and i have run the start file and all the files have been created, but when i try to run it again, with the eula accepted, i get an error saying, "Unrecognized VM option 'AggressiveOpts'
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
[13:40:50] [INFO] Server has been stopped, it has started 10 times in 60min
[13:40:50] [INFO] Restarting server in 10 seconds, press ctrl+c to stop"

[lean sigil]

Does anyone here have experience running a Minecraft Forge server on MineOS? I'm struggling to start a server with Forge on it, vanilla works fine but with Forge it shuts down the server before it starts up

[subtle ibex]

@last parcel please help

[last parcel]

please read the rules #📛︱rules

[subtle ibex]

sorry

but please help

[last parcel]

there is nothing for me to help with, i know nothing about how insanecraft works. perhaps you should speak to the developers of it.

[cunning frost]

my server can run this modlist without crashing, but launching game causes game to crash

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[coarse nest]

Better third person and offhand combat are cohflicting

[cunning frost]

ok

ill delete third person mod then

[glad drum]

why this can be happening?

[last parcel]

looks like it cant find a file it needs

[glad drum]

i know that, my problem is why?

[last parcel]

dont even know what this is about, you provided no context

[glad drum]

1.12 forge mod, i clonned it

and this happens

[last parcel]

you what?

[glad drum]

cloned a github repo

[last parcel]

this isnt really a place for help with coding

could try the dev channel in the minecraft section. #786424115535544350

[glad drum]

ok, ty

[dawn pulsar]

can someone help it keeps crashing again and its not optifine

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[coarse nest]

It seems minecraft can't access some files it needs to rename, try restarting your pc

[dawn pulsar]

OK

wait but each time i do it it still crashees

[zenith blaze]

I'm having the same problem

[coarse nest]

!mc-logs send these

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[autumn agate]

please help

[zenith blaze]

@coarse nest

[coarse nest]

how are you launching this?

[zenith blaze]

Minecraft launcher

[coarse nest]

Through Curseforge?

[zenith blaze]

The curseforge profile yes but through the Minecraft launcher

[coarse nest]

So you click play in curseforge then click play on the launcher that curseforge opens?

[zenith blaze]

No, I click on the Minecraft launcher which takes you to a screen. The curseforge profile shows up in the bottom left corner as well as in the installation tab. When you click play, it goes to launch Minecraft but crashes and you get that exit error code

It's how I've always launched Minecraft, I didn't start having issues until after I updated curseforge to the current version

[coarse nest]

Launch it using curseforge. that log is from a profile that tried to launch from the .minecraft directory but couldn't

[primal sequoia]

@zenith blaze same

[zenith blaze]

That doesn't make sense though, how would it work before the update but not after? I'll give it a shot but I don't see why it's an issue now and not before

[primal sequoia]

i feel the same way

[last parcel]

What you're doing doesn't make sense either. You can't launch a curseforge installed pack with just the Minecraft launcher

[primal sequoia]

i go throughj curse forge and then click play on the app and it just crashes

on the minecraft launcher

[zenith blaze]

I'm probably not explaining it well but I've never used the curseforge launcher to play Minecraft, even with mods installed. I've always opened it through the launcher, selected the curseforge profile and it's worked just fine

[primal sequoia]

it just started working

[zenith blaze]

When I have a second I will get a screen recording to share with you so you can see how I launch it. Like I said I don't use the curseforge launcher, it's always done through the Minecraft one even with mods installed. I just need to make sure it's on the right profile

[last parcel]

So it's not a curseforge profile. It's a profile you named "curseforge" that you put mods in.

[zenith blaze]

No, you'll see in a second

[zenith blaze]

are you available to do a quick screen call? I can't do a normal screen recording outside of in game

[last parcel]

No

[zenith blaze]

Ok, then I'll get some pictures and send them to walk you through it to show you what I do

[zenith blaze]

So to break it down: I open the launcher, I check to make sure the curseforge profile is selected, then I hit play and it (in the past) boots up every time without issue, usually with other mods installed. Until the recent update, I always launched it this way with no problems. When I remove the profile the game will start again with no issues, so am I doing something wrong or do I need to wait for an update that's going to fix the issue?

Alright disregard. I've been using the new launcher and didn't realize it didn't work with it yet. That would have been nice to know beforehand as I no longer have the old launcher files but it is what it is. Thanks for the help

[golden musk]

Ignore the new launcher update. CF does not use it or works with it, yet.
Everything will work fine otherwise.

[mellow rivet]

Can someone help me?

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[mellow rivet]

This?

[tame beacon]

I keep on getting this crash every time I try launching a modpack from curse forge

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[coarse nest]

It seems to be blood magic crashing. Try update it (and any other mods that may be out of date)

[mellow rivet]

Oh alright thank you

[coarse nest]

not that one

read the bots message

[tame beacon]

sorry

This one? sorry if im wrong

[coarse nest]

Try restart your pc, if that doesn't work follow the instructions below

!mc-path

[golden musk]

Change your install path to the following:

For Windows: C:\CurseForge
-Go to C:\ drive. Make a new folder. Name it Curseforge.

For Mac: /Users/Shared/CurseForge

If Minecraft is not installed in CurseForge App:

1. Click the in the top left.
2. Select Minecraft from the list of games.
3. Select the Advanced option and pick the folder you just made.
4. Click Continue.

If Minecraft is installed in CurseForge App:

1. Click the in the bottom left.
2. Select the Minecraft tab.
3. Click Change.
4. Select the folder you just made.

:no_entry_sign: Minecraft Files should NOT be installed inside the following locations :no_entry_sign:

:no_entry_sign: .minecraft folder.
:no_entry_sign: OneDrive folders.
:no_entry_sign: Desktop folder.
:no_entry_sign: Drive roots I.E. Directly into the C:\ drive.
:no_entry_sign: iCloud enabled folders.
:no_entry_sign: or any other cloud saved folder.
:no_entry_sign: or folders with non-English characters in them.

If any of the above are in the path you need to change/move it!

[zenith blaze]

Alright another question, since I managed to get my old launcher back, will optifine work with curseforge and if so, how do I install it?

[coarse nest]

!mc-optifine

[golden musk]

We do not offer support for Optifine!

If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home

Installing Optifine with modpacks on Curseforge:

1. Right click the modpack icon, select Open Folder.
2. Put the Optifine.jar into the mods folder.
3. Now start the modpack.

[keen matrix]

since 1.18 has come out i have decided to test out the mods for it but i am getting errors concerning mincraft heres the logs

[keen matrix]

try optiforge/optifabric along with optifine installed in your mods folder it may help if you are installing optifine for 1.12.2 or older it will work without optiforge

[trim atlas]

what to do

[last parcel]

The thing you pointed to (curseforge profile) is not curseforge.. it's forge.

[keen matrix]

send the crash logs along with your problem to the applied energistics 2 mod page or github but another fix fn would be to check any incompatible mods it may have on the mod page or github if none are available you may have to remove the mod entirely for now if its a custom modpack. if it isnt a custom modpack ask the modpack creator on curseforge for help

if it is a custom modpack and you need an alternative mod i suggest the refined storage mod!

[trim atlas]

its mc eternal 😭

rip

the get link wont even work

[last parcel]

Reinstall the pack

[keen matrix]

^^

[trim atlas]

is that gonna work

[keen matrix]

it may

[trim atlas]

it broke for all my friends as well

[last parcel]

Then report the issue to the pack developers

! projectissue

[golden musk]

Please visit the project page for the content you posted about and look for a way to contact the developer.
Somewhere on the page there is usually a method of contact. Look for one of the following things:

• Issues tab like the image below.
• Discord link.
• Twitter link.
• Comments section below the project.

If no contact method exists you will either have to remove the project or find a solution on your own.

[zenith blaze]

But will optifine itself work? I'm not looking to install anything else apart from that cuz I didn't use any of those in the past

[keen matrix]

optifine generally doesnt work by itself anymore

so you will need to install optifine along with optiforge/optifabric

[dawn pulsar]

can someone please help me it keeps crashing even if i re set my laptop

[keen matrix]

all it does is just translate optifine into something fabric/forge can understand

can we have the logs please

yamza how do u do the log thingy

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[keen matrix]

aha

[mild flicker]

Hey uhm, can anyone help me with a crash I have? Applied Energistics 2 sure is a mess of a mod...
Already had two crashes with it, and now the game won't even blood start... And I'm not removing it now cause... I ain't losing ALL MY BLOODY STUFF, cause it's all inside of a Drive from the mod...

[keen matrix]

do you have any backups?

of the world

also try manually downdating the mod

[mild flicker]

Not really since things been pretty stable until I decided to build the ONE thing that I gave a crap about from AE2 (The Drives so I could store all into it) and now it does this after I moved ALL my stuff into it.

Will try that

Will make a backup before

[keen matrix]

yes definitely do that

[coarse nest]

There are forge settings to remove erroring blocks, if you think teh block thats erroring is safe to remove

[mild flicker]

If it works, I will keep a backup of it and if happens again I will try Refined Storage as it has a similar thing to it.

[coarse nest]

there are also tools to open worlds withuot loading them to remove blocks manually

[mild flicker]

Well, it started after I did the Drives where ALL my stuff is store inside, if that is the erroring block then it would not help on the slightest haha

[coarse nest]

can you send the crash log?

[mild flicker]

Sure

[coarse nest]

Theres a mod registering a dimension with the same id as the ae2 spatial one, at least one of those mods should have a config to change the id from 2 to smthn else

Won't even need to touch the world

[mild flicker]

Well, I saw that on the log but I can't find how to change AE2's spatial dimension ID.

Cause ID2 is the current dimension I'm in

Like wth

[coarse nest]

Look in the config folder for an ae2 config file, then look under the spatial io section

[mild flicker]

Huh, must have missed it when I looked over at the config for AE2, the search result showed no results at first for ID=2, guess it wanted the words that came before ID.

Will try now

[nimble egret]

Insane craft always lags me out

[coarse nest]

!help

[golden musk]

╰( ͡° ͜ʖ ͡° )つ──☆*:・ﾟ *˜”*°•.˜”*°• Many Help •°*”˜.•°*”˜* <:curselit:796985620550385705>

Please provide a description of your issue with as much detail as possible. If you have an issue with a mod or modpack, tell us the name. Explain what you can see happening. Be specific!

Tell us what is happening, we already know it "doesn't work".
Avoid using words like "it", tell us exactly what "it" is.
Don't assume anyone knows what you are talking about, be specific.
Tell us what you expected to happen.

Provide screenshots or video if possible.
Provide a log if possible. ?mc-log

[keen matrix]

!mc-ram

[golden musk]

How to set Global Minecraft RAM value.

1. Click the icon in the bottom left to open settings.
2. Click the Minecraft tab.
3. Scroll down.
4. Slide slider to recommended ram range as seen below.

[nimble egret]

I place my ram at that

[coarse nest]

insanecraft is very bloated. You neeed 8-10gb at least if your computer can spare it

[nimble egret]

it still syas not respoinding

*says

now is shows a black screen

[coarse nest]

how long have you left it waiting? Those packs can take upwards of half an hour to load

[nimble egret]

well it sbeen 2-3 mins

currently

[fast peak]

i need help wiith lag. and the problem is that i am now playing a randomizer mod and i got a 1-2 fps and its very laggy and now i dont know how to fix this

[dark mica]

I’m trying to load Better Minecraft [Plus] but whenever I start the launcher up the loading gets stuck around 500 and freezes I’ve tried messing around with ram but nothing seems to help

[autumn agate]

its loading, u need be patient and wait

[dark mica]

It’s been half an hour, is it because I’ve loaded it for the first time?

[fast peak]

!mc-ram

!mc-lesslag

!help

!help lag

?mc-lesslag

?mc-lag

[wild jewel]

@fast peak This is your final warning.
Stop spamming.
Stop pinging staf members to get help

[dark mica]

this is what happens when i try boot it up

[wild jewel]

That is just forge loading

[dark mica]

I know it just gets stuck there, for like. A long time, I haven’t seen it go past that and it’s almost been an hour

[wild jewel]

And other modpacks,

[fast peak]

ok but i need help

[fast peak]

.

[dark mica]

Asking what happens with other mod packs? They load in about 30 seconds

[wild jewel]

You don't spam for that, the only thing you are doing is getting yourself banned.
Remove the randomizer mod if it is causing issues

[fast peak]

ok. i chill

[wild jewel]

Then this pack is broken, did you play it before?

[dark mica]

I’ve played it previously, but I did a reset of my computer recently

But nothing much is different

[fast peak]

but i dragged some mods to mine profile picture in a folders mod.....

[dark mica]

This is the first time I’ve loaded the mod pack since the reset

[wild jewel]

Try to reinstall the pack

[wild jewel]

And now they are causing issues, so remove them again

[dark mica]

I added a few personal favourite mods in there, would that mess things up?

[wild jewel]

Could do that

[fast peak]

why but when how can i fix it ? and play without lag

[wild jewel]

More mods means less fps, that simple

[fast peak]

but what i need to do to play with randomizer mod without lag

[dark mica]

I am technology deaf but if your computer cannot run it, maybe it’s just your computer

[wild jewel]

See reply between yours and mine.

[fast peak]

ok

[dark mica]

@wild jewel it works now! I redownloaded it, hey idk if this means much but I appreciate the help, I wanted something to distract myself today and this is big. You’ve made my day. Thanks

[full mantle]

hı guys

ı am new

and ı need some help about better mc mod

who can help me ?

[wild jewel]

Give the problem first, can't help without it

[full mantle]

ı want to use backpack ın better mınecreaft

ıt says dısabled

and also ı cant rıde dragon

[dry siren]

minceraft won't open

plz help

i dunno why

here's the correct file

[minor grotto]

is it just me or Minecraft 1.18 is not working on curseforge app?

[golden musk]

╰( ͡° ͜ʖ ͡° )つ──☆*:・ﾟ *˜”*°•.˜”*°• Many Help •°*”˜.•°*”˜* <:curselit:796985620550385705>

Please provide a description of your issue with as much detail as possible. If you have an issue with a mod or modpack, tell us the name. Explain what you can see happening. Be specific!

Tell us what is happening, we already know it "doesn't work".
Avoid using words like "it", tell us exactly what "it" is.
Don't assume anyone knows what you are talking about, be specific.
Tell us what you expected to happen.

Provide screenshots or video if possible.
Provide a log if possible. ?mc-log

[dry siren]

can anyone find anything in my thing that i posted above?

[minor grotto]

when i create a modded 1.18 on curseforge it goes normally

but when i press play on the minecraft launcher

i get this

only on 1.18, all other modded versions work just fine

[wild jewel]

Did you clear the arguments?

[minor grotto]

wdym

oh the crash text file?

it didnt provide me anything, just "The game stopped working"

[jagged moss]

what can i do when i want to play with my friend with the same modpack that he created?

[wild jewel]

Make a server

[wild jewel]

Go to settings, Minecraft, additional arguments, is there anything in there?

[jagged moss]

so i want to download the modpack that he created

[wild jewel]

Did he upload it?

[jagged moss]

how he can do that?

[minor grotto]

nothing

[wild jewel]

! mc-packshare

[golden musk]

There are two ways to share a modpack you've made with others...

Export and Share - For Friends to Small Groups.

1. Click the Icon for the modpack.
2. Click the button next to play.
3. Click Export.
4. Select the files that should be included.
5. Send the zip to the people that want it! They can follow the instructions in !mc-installpack to install the pack!

Upload to Curseforge - For Public Release to Everyone.

This options will make your pack public to EVERYONE, it comes with extra requirements and will take some effort to set up.

1. Go to here: https://www.curseforge.com/project/432/4471/create
2. Fill out the information with a proper description of the pack. This should allow anyone to understand what the pack is.
3. Click the Icon for the modpack in the CurseForge app.
4. Click the button next to play.
5. Click Export.
6. Select the files that should be included.
7. Open your Project you made on the CurseForge site and Upload the file you just made.
8. Wait for Moderation & Sync so it can show up in the client! (See !sync for limitations)

[lunar terrace]

Can someone pleas help me?

https://cdn.discordapp.com/attachments/912718864960331807/917033329361055804/unknown.png

[wild jewel]

!mc-installfix

[golden musk]

1. Click on the Minecraft Tab on the Left side of the CurseForge App.
2. Click button next to the Create Custom Profile option.
3. Click Repair Installation option.
4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

[jagged moss]

and how can i install the pack?

[lunar terrace]

pleas?

[wild jewel]

Read the message again, also tells that

[jagged moss]

thx 🙂

!mc-installpack

[golden musk]

How to install modpacks with the search features in app.

1. Open the Minecraft section of the app.
2. Click the top search bar where it says Search for modpacks OR Click the Browse Modpacks Tab.
3. Find the Modpack you want to install and click install on it.
4. Wait for CurseForge app to download and unpack all the required files.
5. Once finished, click Play!

How to install modpacks from a Export. (Custom/Private/Site downloaded Modpack zip)

1. Get CurseForge App if you don't have it, use !download for a link.
2. Get the exported modpack from CurseForge or someone else, !mc-packshare explains how to make them.
3. Open the Minecraft section of the app.
4. Click Create Custom Profile
5. Click the Import option.
6. Find the file you just downloaded in step 2 and select it.
7. CurseForge app will now attempt to download and unpack the modpack. If it fails, try steps 4-6 again.
8. Once finished, click Play!

[lunar terrace]

Can pleas anyone help me... https://cdn.discordapp.com/attachments/912718864960331807/917033329361055804/unknown.png

[wild jewel]

Server is offline

[jagged moss]

sry but iam to dumb for that i cant do anything i dont know how to do that tim

[wild jewel]

They are steps, how can't you follow them?

[jagged moss]

becuase iam german and i dont rally know the english language so i can speak it well buti cant follow steps or something else

really*

[wild jewel]

Then use google translate for it

[lunar terrace]

It means sever is offline?

[wild jewel]

Normally it does

[lunar terrace]

Well server is running

I tried to restart launcher

nothing

Is there any other fix for that?

[last parcel]

usually means your mods dont match

[lunar terrace]

Hm so what do i do

Because it works for others

[last parcel]

you check your mod versions compared to what is on the server

[lunar terrace]

16.5 and server is 16.5

[last parcel]

idk what "16.5" is and it tells me nothing anyway. you need to look at the mod versions

[lunar terrace]

mod versions are 1.16.5

[last parcel]

that is not a mod version, that is a minecraft version

[lunar terrace]

oh

also.. bruh i got new problem

[dry siren]

can someone plz help meh

its minecraft

if i try to press play on the minecraft launcher that pops up then it crashes with no error message

just code 0

like i press play in curse, press play in the launcher, it dissapears for a second then reappears with error code 0

i just repaired installation and now it says this

Failed to download file.
Name: fabric-loader-0.11.7-1.16.5.jar
URL: https://s3.amazonaws.com/Minecraft.Download/versions/fabric-loader-0.11.7-1.16.5/fabric-loader-0.11.7-1.16.5.jar
Filename on disk: fabric-loader-0.11.7-1.16.5.jar
Path: C:\Users\boogi\curseforge\minecraft\Install\versions\fabric-loader-0.11.7-1.16.5\fabric-loader-0.11.7-1.16.5.jar
Exists: File

wtf is happeneing?

and now it says error code 0 again

[pine sapphire]

i have tried reinstall the app,re launch but still not working

[dry siren]

what is wrong with my computr

somehow it fixed

[cunning frost]

whts wrong with bookshelf

all was working fine until jei was installed cuz for some reason it was removed

running this modlist with my server has no crashes occuring

so idk wht could be wrong

[graceful iris]

this error occurs when i try to join an aternos server on mac with 1.16.5 Caused by: java.lang.LinkageError: loader constraint violation: loader (instance of sun/misc/Launcher$AppClassLoader) previously initiated loading for a different type with name "org/apache/logging/log4j/util/MessageSupplier"

[cerulean kite]

Can someone help me with this?
im not very good at reading logs
when i try to open Minecraft on my own modpack it crashes with error code -1

[heady bay]

does enigmatica 2 light work well with 4 GB ram?

[cerulean kite]

yes it should work with this much ram

[acoustic idol]

They recomend a minimum of 5gb of ram for that pack

[cerulean kite]

true

[acoustic idol]

And if 4gb is the total amount of ram you have Not many modpacks will play on that.

[acoustic idol]

Looks like wilderworld is having issues

[cerulean kite]

thanks

[graceful iris]

I figured out the bug, it's a problem with an item not rendering, I need this mod. How should i fix it?

[acoustic idol]

Report it to the mods dev

[tawdry pebble]

keep getting this error message trying to load up my Divine Journey 2 installation. Few days ago it wasn't getting past loading Thuamielcraft either.. not sure what exactly happened

[coarse elm]

#📢︱news

[vague hearth]

how do make an ATM 6 server on my computer?

[wild jewel]

!mc-installserver

[golden musk]

How to **manually** install a server - **On your own PC**

1. Check if the modpack has a server pack, if it does: use that and skip below.
2. Go to the Forge website http://files.minecraftforge.net/ and download the Installer for the forge version the pack is using.
3. Run the installer and choose Install server. Do not install to your desktop. Also do not install inside a OneDrive folder.
4. Run the server using the forge.jar. A file called eula.txt will be generated. Open it and change eula=false to eula=true
5. From the Client; Copy the mods folder, config folder, and any other folders needed for the pack to work into the server folder. If the modpack has a server pack, use this instead!
6. Run the server again.
7. Port forward your machine if needed. (Google it)

Long version: https://pastebin.com/83DXfGTH

[waxen pine]

@mystic sinew do game issues here - looks like "improved stations"

calling something in fabric api that doesn't exist

[solid ermine]

Hello i need help to install server
Starting Loader, output incoming
Invalid maximum heap size: -Xmx5G
The specified size exceeds the maximum representable size.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
[17:08:28] [INFO] Server has been stopped, it has started 4 times in 60min
[17:08:28] [INFO] Restarting server in 10 seconds, press ctrl+c to stop

[coarse nest]

Is this on your pc?

[solid ermine]

on my server

[coarse nest]

Do you have the 32 or 64 bit version of java installed?

[solid ermine]

mmmmm

where i can see?

[coarse nest]

Press windows button and type cmd press enter. In the window that comes up type java -version. It should be there i think

[solid ermine]

java version "1.8.0_311"
Java(TM) SE Runtime Environment (build 1.8.0_311-b11)
Java HotSpot(TM) Client VM (build 25.311-b11, mixed mode)

[coarse nest]

Hhphm. Not helpful then..

[solid ermine]

its in X86

[waxen pine]

usually that is the 32 bit message yah

[coarse nest]

Ahh. So you need to install the 64 bit version cause in 32 the memory limit is hard capped to one or two gigbytes

[solid ermine]

o its work nice

thx

[mystic matrix]

Hello, trouble installing optifine in a modpack (better minecraft) I’ve attempted many different options with no luck so far. Currently I’ve tried put the basic 1.16.5 .Jar file into the modpack folder which causes a crash at startup with error: 0 (This happens with every option)

[coarse nest]

!mc-optifine

[golden musk]

We do not offer support for Optifine!

If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home

Installing Optifine with modpacks on Curseforge:

1. Right click the modpack icon, select Open Folder.
2. Put the Optifine.jar into the mods folder.
3. Now start the modpack.

[waxen pine]

@autumn agate you can post your latest.log file here for help

the message you see is a result of mods that use datapacks in their structure, is completely normal. your problem is most likely something else

[indigo crown]

can someone help me

i was launching my minecraft mod pack

and i crashed

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[indigo crown]

thats crash

[coarse nest]

did you press a button then it crashed?

[indigo crown]

nope

when i lainched

it crashed

should i give it more ram?

[coarse nest]

can you provide the logs instead of the crash report? that crash seems to be unrelated (tho im not sure)

[indigo crown]

@coarse nest theres log

[coarse nest]

I can't work out what the issue is. Try removing mods one by one till it works again

[waxen jetty]

Know how to fix?

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[coarse nest]

Seems to be a known issue with no fix: https://github.com/TeamChocoQuest/ChocolateQuestRepoured/issues/302
Use a version BEFORE 2.6.0B for now

[waxen jetty]

What do you mean by before 2.6.0B?

[coarse nest]

the mod version, different version can be found here: https://www.curseforge.com/minecraft/mc-mods/cqrepoured/files

you want the 6.1 file

[waxen jetty]

I downloaded the 6.1 file same thing.

[coarse nest]

did you place it in your mods folder and remove the old version?

[waxen jetty]

Yes.

[coarse nest]

huh. you will have to remove that mod then

[stiff canopy]

So I've recently started a new world on 1.18, and I decided I wanted to have some clientside mods with it such as xzaero minimap, inv hud, jei and optifine. All of which are presumptly updated to 1.18. However, upon following the corrective installation process and having all of the right versions, my game crashes before even reaching the loading window and displays the dreadful error code 0.

I have no clue why this is happening and I can't find any fixes online..

[waxen pine]

try clearing your JVM arguments box in the launcher app settings

[stiff canopy]

Ah okay nevermind it was actually the snapshot version of Optifine apparently

Still don't get why'd it would crash like that

Instead of displaying a mod error.

[waxen pine]

ah. you mean why would optifine (which is great at breaking things) wouldn't work on a version of (modded) minecraft that has only been released for 1 week? 😉

[stiff canopy]

True

By the way I don't know if you've ever used inventory HUD but how do I disable the overlay in the middle of my screen

If you have

[coarse nest]

its like crtl i to open settings

should be listed in controls in options

[silk pumice]

Hey so everytime I try to load a 1.16.5 mod pack I get an auto crash and an error code 0

[sweet thunder]

im having a packet size issue when loading world in 1.18

there are no mods right now that can increase the maximum packet size for fabric 1.18

is there a way to increase the packet size manually?

[coarse nest]

no, not unless you can code

[coarse nest]

!mc-logs ⤵️

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[keen matrix]

if any1 has problems with modded 1.18 fabric not booting and they have goblin traders installed goblin traders is currently causing some crashes so that may be your problem

[buoyant tree]

here is the crash report

@coarse nest

[acoustic idol]

2gb of ram allocated is rather low for modded. 4gb is usually the minimum needed for modded mc

Would start with that

[buoyant tree]

how do i do that?

[acoustic idol]

Are you using the cf app?

Or what app are you using

[buoyant tree]

im using cf to run minecraft

[acoustic idol]

!mc-ram

[golden musk]

How to set Global Minecraft RAM value.

1. Click the icon in the bottom left to open settings.
2. Click the Minecraft tab.
3. Scroll down.
4. Slide slider to recommended ram range as seen below.

[buoyant tree]

ty

wait is forge 1.8.9 the same as curseforge

[acoustic idol]

Forge =/= Curseforge

[coarse nest]

!!=

[golden musk]

Wording is important!

Forge = Minecraft Forge, This is a modloader often just called "Forge".
Fabric = Fabric MC, this is another modloader, just called "Fabric".
CurseForge = A Website/App that has content for games.
Mods = Individual mod files.
Modpacks = Multiple mods put into the mods folder or downloaded from CurseForge.

These are not Interchangeable! Please use the correct terms as it allows us to help you faster!

[buoyant tree]

so im using forge then 🤷‍♂️

[acoustic idol]

Then you will have to manually increase the ram amount in the app your using. OR get the cf app (easier)

[buoyant tree]

does the cf app work the same?

[acoustic idol]

It makes life easier.

[buoyant tree]

mind explaining how to download?

[acoustic idol]

!getcf

[golden musk]

Looking to install the CurseForge app?

<:windows:798410728188936222> Windows

Minimum Requirements:

• OS Version: 7 (64 bit), 8.1, 10, 11
• 64 bit Required.
• 350MB storage space.
• Microsoft .Net 4.8
• Intel/AMD quad-core CPU
• 8GB ram

Download: https://download.overwolf.com/install/Download?&PartnerId=4047

If you are having issues with the installer use the URL below to install Overwolf then go to the app store to download CurseForge.
https://content.overwolf.com/downloads/setup/latest/regular.html

---

---

<:mac:798410654418862130> Mac

Minimum Requirements:

• OS Version 10.14 or newer.
• 64 bit Required.

Download: https://curseforge.overwolf.com/downloads/curseforge-latest.dmg

---

---

:penguin: Linux

Minimum Requirements:
Yes.

Download: :person_shrugging:

[buoyant tree]

ty

ill be back bc probably need more help lmao

[acoustic idol]

Can then use the app to install mods or modpacks

[buoyant tree]

another question

[buoyant tree]

ive added mods into the mods folder but they dont show up

[acoustic idol]

If the mods are from the Curseforge site use the app to install them

!mc-installmods

[golden musk]

How to install mods in CurseForge App.

1. Click + Create Custom Profile
2. Name it, select the required Minecraft version, select the Forge version (usually the highest number), click Create.
3. Click the profile icon.
4. Click Add More Content
5. Search and install the desired mods.
6. Start the game!

How to install mods not on CurseForge.

1. Right click the profile picture or Open the profile and click the Icon next to the play button.
2. Click Open Folder.
3. Drag the mod(s) into the mods folder. (Note: Some mods will require others, to run. Make sure to read the instructions for the mod!)
4. Start the game!

[buoyant tree]

i dragged the mods into the mods folder like it said but they still arent appearing

[acoustic idol]

Where did you get the mods from?

[buoyant tree]

github

[acoustic idol]

I dont think mods that are not from cf will show in the app, However if you play the pack they should be there on boot

[buoyant tree]

ok

[acoustic idol]

As long as the mods are for the same version of minecraft as your custom profile

[buoyant tree]

ill load it now to find outt

crashed bc of two mods

removed them and trying again

another crash report

[acoustic idol]

Will it boot without the mods you added?

also is optifine one of the mods?

[buoyant tree]

yes

[acoustic idol]

Remove optifine and try again

[buoyant tree]

does that affect it

ok

it loads without any mods

loading with all but optifine now

[coarse nest]

Optifine messes with things that mods use and can cause a LOT of issues ranging from ores not spawning to full on world corruption

[buoyant tree]

yes it works

damn

thanks ❤️

[buoyant tree]

all works now 😄 ❤️

[buoyant tree]

ok, thanks

[keen finch]

ok i have actually no idea where else to go for this problem, ive looked everywhere and maybe im just dumb and the solution is obvious but idk. im tryna play create above and beyond and every time i try to load my world it gets stuck on 100%. never had this problem before and im running it the exact same way i was before

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[keen finch]

boink

[coarse nest]

did you modify it in any way?

[keen finch]

besides optifine no, should i try and get rid of that?

[coarse nest]

its probably not the cause (tho with optifne you never know). I would reccomend going to the create discord for this, as it may be an issue with some of their custom stuff

[keen finch]

dyou um have the link for the create discord because i looked for it and i just figure out how to find the discord lol

i am blind tho so that could be a contributing factor lol

nevber mind!!

thank u for the halp

turns out it was optifine

[autumn agate]

It’s always optifine for some reason

[autumn agate]

anyone can helpppp???

[waxen pine]

!help

[golden musk]

╰( ͡° ͜ʖ ͡° )つ──☆*:・ﾟ *˜”*°•.˜”*°• Many Help •°*”˜.•°*”˜* <:curselit:796985620550385705>

Please provide a description of your issue with as much detail as possible. If you have an issue with a mod or modpack, tell us the name. Explain what you can see happening. Be specific!

Tell us what is happening, we already know it "doesn't work".
Avoid using words like "it", tell us exactly what "it" is.
Don't assume anyone knows what you are talking about, be specific.
Tell us what you expected to happen.

Provide screenshots or video if possible.
Provide a log if possible. ?mc-log

[autumn agate]

my game is not loading i waited like 40minutes and its still not loaded

[wild jewel]

Pixelmon is huge, how much ram did you allocate?

[autumn agate]

let me check

.i didnt really allocate any ram because i opened the server by "open to lan" and my computer's ip

[wild jewel]

Client also has ram -.-

!mc-ram

[golden musk]

How to set Global Minecraft RAM value.

1. Click the icon in the bottom left to open settings.
2. Click the Minecraft tab.
3. Scroll down.
4. Slide slider to recommended ram range as seen below.

[waxen pine]

modded MC + LAN only work if you literally win the lotto

i.e. it pretty much does not work

[autumn agate]

it is on max for me

[coarse nest]

how much is max? too much ram is also bad

[autumn agate]

its about 12k

[round bane]

How may I fix "Exit Code: 255?"

[autumn agate]

basically when i try to open the world it shows me 0% on the screen and it is just stucj there

stuck

[coarse nest]

try set it to 6-8, 12 is waay too much for just pixelmon

[coarse nest]

!mc-logs ⤵️

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[autumn agate]

yeah i just tried that and still the same problem

that is when i tried with 7k ram

[waxen pine]

so... you mean 7000mb or 7 gigabytes yes?

[autumn agate]

7000mb

[waxen pine]

huh weird that it is launching with the CF app seemingly and it doesn't add a few JVM args like G1GC

i had thought they made that standard

[autumn agate]

so what should i do?

@coarse nest

[coarse nest]

I have no idea

[autumn agate]

chief

what this is means?

-XX:+DisableExplicitGC -XX:+UseG1GC -XX:+UseNUMA -XX:+UnlockExperimentalVMOptions -XX:+CMSParallelRemarkEnabled -XX:MaxTenuringThreshold=15 -XX:MaxGCPauseMillis=30 -XX:GCPauseIntervalMillis=150 -XX:+UseAdaptiveGCBoundary -XX:-UseGCOverheadLimit -XX:+UseBiasedLocking -XX:SurvivorRatio=8 -XX:TargetSurvivorRatio=90 -XX:MaxTenuringThreshold=15 -Dfml.ignorePatchDiscrepancies=true -Dfml.ignoreInvalidMinecraftCertificates=true -XX:+UseFastAccessorMethods -XX:+UseCompressedOops -XX:+OptimizeStringConcat -XX:+AggressiveOpts -XX:ReservedCodeCacheSize=2048m -XX:+UseCodeCacheFlushing -XX:SoftRefLRUPolicyMSPerMB=10000 -XX:+UseAdaptiveSizePolicy -XX:+AlwaysPreTouch -XX:+ParallelRefProcEnabled -XX:SurvivorRatio=32 -XX:G1HeapWastePercent=5 -XX:G1NewSizePercent=40 -XX:G1MixedGCLiveThresholdPercent=90 -XX:G1ReservePercent=20 -XX:ParallelGCThreads=4

braiar thrain send it to me and said Copy > paste that into the JVM (java) arguments box next to the ram/memory slider
try launching with those

[wild jewel]

They are the java arguments

[autumn agate]

and thats gonna help?

if i gonna do what he said?

[wild jewel]

It is worth a shot

[autumn agate]

ok then

[waxen pine]

it may help you chug through the pixelmon loadup

default java 8 is not very optimized at mc

[autumn agate]

its not loading

it still just shows me that 0%

[waxen pine]

are most other programs closed on your computer?

[autumn agate]

yeah

maybe it is worth mentioning that we added more mods into the game

[waxen pine]

the other shoe drops

[coarse nest]

Modifying packs generally isnt supported, but pixelmon is tiny on its own so i can understand

[autumn agate]

maybe there's a problem with one of them ( which is weird because it worked with all the mods )

[waxen pine]

all kinds of things can conflict with the spaghetti code that is modded. it's a small miracle that modpacks ever work at all lol

[autumn agate]

so there's something i can do to fix this problem?

[coarse nest]

Remove all the mods and add them back in till it stops working

[autumn agate]

but if i'll remove them its gonna save?

if i added them back

[coarse nest]

You mean the world?

[autumn agate]

yeah its gonna save what i did if i'll add them back?

[waxen pine]

possible course of action:
1- install a new fresh versioin of the modpack - confirm it creates and loads a new world normally
2- remove the mods you broke your original with - or at least one at a time and try reloading

[autumn agate]

i installed all the mods at virsion 1.12.2 because i added them to the pixelmon modpack

[waxen pine]

you can also open your file browser and make a copy of your world ("saves" folder) to backup

not clear what you mean. "all the mods" - as in the modpack with that name? added them to pixelmon modpack - as in copied the mods from ATM to the pixelmon?

[autumn agate]

i added them to the modpacl

modpack

[waxen pine]

you need to be more clear. what is "them"

[autumn agate]

the mods

[waxen pine]

as in like 200 mods from ATM?

[autumn agate]

(installed mods)

[waxen pine]

yeah you aren't answering any of my questions with direct answers so idk if I am able to continue here

[autumn agate]

them its mean the mods

i added the mods to the modpack called "the pixelmon modpack"

[waxen pine]

what mods did you add...

them is not the answer

[autumn agate]

say the name of the mods?

[waxen pine]

whatever you added obviously is causing issues - this is the kind of thing people who create modpacks have to deal with and figure out so that others who download them can use without major issues like this

[autumn agate]

:/ so for now i'll give up on the world if you say its pretty imps

[waxen pine]

install a clean version of the pixelmon modpack and double check to see that it works - at least then you'll know that your added mods are the problem 100%

[foggy plaza]

Hello, I'm looking on how to make a mod, not make a modpack, I want to MAKE a mod...how would I do this? Thanks.

[waxen pine]

Check the pin in #⚙️︱authors-help . Learn Java code > learn some MC specific stuff > read forge/fabric docs > look at examples/code of other mods

[full mantle]

guys how can ı play better mınecraft wıth shraders

are there any videıo for help

[golden musk]

We do not offer support for Optifine!

If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home

Installing Optifine with modpacks on Curseforge:

1. Right click the modpack icon, select Open Folder.
2. Put the Optifine.jar into the mods folder.
3. Now start the modpack.

[coarse nest]

!mc-optifine and put shaders in the shaderpacks folder, then activate them in the video settings -> shaders menu

[full mantle]

when ı clıck vıdeo settıng there ıs no shaders menu

[coarse nest]

You obviosuly do not have a shaders mod installed then

[full mantle]

no actually ı am usıng ın normal mc

but when ı begun ınbetter mc

there ıs nothıng

[coarse nest]

Follow these instructions to install it into a modded profile ⤴️

[full mantle]

okey ı ll try

thanks

wheere ıs the modpack ıcon

[coarse nest]

In the curseforge launcher

[full mantle]

can u help me wıth sound call

ı ll gone share my screen

[coarse nest]

No.

You can send screenshots here

[full mantle]

okey

whats ıs next

[coarse nest]

The picture that says "better minecraft" is the icon

[full mantle]

and

[coarse nest]

Follow the bots instructions. I do not need to copy paste them

[full mantle]

look my englısh ıs not really good and ı dont understand

where ıs the modpack ıcon

[wild jewel]

#👽︱game-support message

[full mantle]

when ı clıck rıght

there ıs nothıng happened

[coarse nest]

Then click the three dots shown on the right of this ⬆️ picture. Select Open Folder from there and continue with the bots instructions.

[full mantle]

okeyt

ı dıd

ı add opıfıne ın to the mods

what next?

[coarse nest]

Launch the modpack

[full mantle]

game ıs crashıng

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[coarse nest]

Drag and drop latest into discord, like the bot says

[wild jewel]

Why did you install optifine 1.18 on minecraft 1.16?

[full mantle]

ı dont know man no one doesnt say about versıon

[wild jewel]

We normally don't need to say that either

[full mantle]

bot says download optıfıne

but dont says versıon

[wild jewel]

Bot is stupid, bot doesn't know your version

[sage pier]

(Bot also says that we don't give support for Optifine, but that's beside the point right now :D)

[full mantle]

ı dowloaded 1.16.5

game stıll crashın

gg

[wild jewel]

Optifine is known to break things, that is why we don't provide support for it.
Did you remove the old jar?

[full mantle]

yep

[wild jewel]

Remove the other one as well, does the modpack work then?

[full mantle]

hold on

ı removed stıll crashıng

[wild jewel]

Then post new log file

[odd stratus]

So I've tried installing Enigmatica 8, which is a 1.18 Minecraft Modpack, but it returned a exit code 1 error.

To resolve this issue I tried:

• Installing Java 17 manually + setting the path in the profile
• Setting Java 17 as default in CurseForge
• Reseting Java Parameter in the Minecraft Launcher
• Reinstalling the Modpack

What else could I do to solve this issue?

[wild jewel]

Why is there still an optifine jar there?

[full mantle]

when ı look mods ı cant see another optıfıne

just 1.16.5

[wild jewel]

Told you to remove both

[full mantle]

ok

ı did

[coarse nest]

Try restart curseforge, if that doesn't work then reinstall curseforge. (This is caused by an out of date CF version)

[full mantle]

whats now

[wild jewel]

Now you start the modpack again,

[full mantle]

ok

whats next

[wild jewel]

Does it work?

[full mantle]

yep

[wild jewel]

Then optifine broke it

[full mantle]

can u explaın wıth detaıls

[wild jewel]

Optifine = bad

[full mantle]

ı dont know what does ıt mean

my englısh sucks

[wild jewel]

No optifine = play game
Optifine = game crash

[full mantle]

got ıt

ı can play better mc rıght now

we're back where we started

[coarse nest]

Yep. Because optifine crashes your game you cannot use shaders. There are no other shader mods for forge.

[full mantle]

so ı am cant play wıth shraders

[coarse nest]

That is correct

[full mantle]

so what should ı do

how other players can

[coarse nest]

Go ask them 🤷.
They probably modify the modpack to make it work

[full mantle]

why dıd u response ıf u dont know bro are u all serıous

ı dıd evrythıng u saıd

and my game ıs crashın g

[wild jewel]

Yes, we are, the last line in the bot message says that we don't support it.

[full mantle]

and now u are says u cant plat

tıme waste

anyway

thanks

[wild jewel]

Optifine is known to break things, the only way to know is to try

[full mantle]

ı thınk u all dont know what u are doıng

[wild jewel]

Why is that?

Because we don't know if a mod outside curseforge works on every modpack out there?

[sage pier]

One way, would be to ask the people, who got it working with Better MC, or even Optifine themselves.

[full mantle]

cause ı dıd everythıng u are saıd and my game crashed

do u thınk ıs that sensıble

[wild jewel]

What don't you understand about this:

Optifine is known to break things

[full mantle]

dude ı understand that

[wild jewel]

Then what is the problem? We don't have a list of projects that work with optifine

[full mantle]

ı just saıd ı want to plat better mc wıth shraders

and ı follow u saıd thınf

and my game crashed

[wild jewel]

And we don't know if that works either.

[full mantle]

so

ıf u dont know

[wild jewel]

Clearly it doesn't

[full mantle]

why wastıng my tımE?

[wild jewel]

We know how it is supposed to work, we can't predict those crashes

[full mantle]

okey dude

okey

thanks

[odd stratus]

Thanks, reinstalling helped. (The Update Button didn't work.)

[coarse nest]

Good to know that worked!

[autumn agate]

Hello, I have a problem with the mod path in curseforge. Could someone help me with that?

[acoustic idol]

!mc-path

[golden musk]

Change your install path to the following:

For Windows: C:\CurseForge
-Go to C:\ drive. Make a new folder. Name it Curseforge.

For Mac: /Users/Shared/CurseForge

If Minecraft is not installed in CurseForge App:

1. Click the in the top left.
2. Select Minecraft from the list of games.
3. Select the Advanced option and pick the folder you just made.
4. Click Continue.

If Minecraft is installed in CurseForge App:

1. Click the in the bottom left.
2. Select the Minecraft tab.
3. Click Change.
4. Select the folder you just made.

:no_entry_sign: Minecraft Files should NOT be installed inside the following locations :no_entry_sign:

:no_entry_sign: .minecraft folder.
:no_entry_sign: OneDrive folders.
:no_entry_sign: Desktop folder.
:no_entry_sign: Drive roots I.E. Directly into the C:\ drive.
:no_entry_sign: iCloud enabled folders.
:no_entry_sign: or any other cloud saved folder.
:no_entry_sign: or folders with non-English characters in them.

If any of the above are in the path you need to change/move it!

[autumn agate]

I do not understand, I am sorry

[last parcel]

dont understand what

[autumn agate]

does not matter

[lunar terrace]

what to do it says im not white-listed even tho i am

[last parcel]

ask the server owner

[lunar terrace]

but i am white-listed

[full mantle]

guys what should ı do

[last parcel]

?projectissue

[golden musk]

Please visit the project page for the content you posted about and look for a way to contact the developer.
Somewhere on the page there is usually a method of contact. Look for one of the following things:

• Issues tab like the image below.
• Discord link.
• Twitter link.
• Comments section below the project.

If no contact method exists you will either have to remove the project or find a solution on your own.

[lunar terrace]

and thing is it work for others...

[last parcel]

so ask the server owner...?

[lunar terrace]

about what?..

[last parcel]

your issue

[full mantle]

dude ı read your replıes

but ı dont undertsand

thats why ı wrote ın dm

[lunar terrace]

k um i just asked him and he said that he turn off whitelist

[last parcel]

you report to the developer of the mod

[acoustic idol]

The create issue is more or less know (I have a report to em about it) Restart your game. Its a stupid random crash. Rebooting can fix it

[wild jewel]

You don't DM for this, follow rule 6

[lunar terrace]

is there anything else i can do?..

[last parcel]

the issue is with the server, there is nothing you can do

[full mantle]

how can ı reboot

[lunar terrace]

then how is it working for others just not for me

[orchid pier]

close game, open game

[full mantle]

not work

[last parcel]

ask. the. server. owner.

[orchid pier]

or if hes talking computer, turn off pc, turn on pc

[acoustic idol]

Close the pack, close the mc launcher > start the pack again. If it fails do it again OR report the issue to the mods author

[lunar terrace]

i already said he turn off w.h.i.t.e.- list

[last parcel]

the he has still done something wrong

[full mantle]

where can i find it

who ıs mod

[lunar terrace]

and that's the issue we do not know what

[acoustic idol]

If your playing a modpack made by someone report it to them,

[full mantle]

its better mc

[orchid pier]

modpack dev

[acoustic idol]

Then report it to the better mc authors

[full mantle]

all versıons are crashıng

[acoustic idol]

Report it then

[wild jewel]

@orchid pier Report is not for broken packs

Issues tab is

[orchid pier]

yeah i was about to correct myself

i saw this

[wild jewel]

https://discord.gg/8ZmhaPPbjE

Discord link to better mc discord 🤷‍♂️

[full mantle]

ı already ın ıt

[wild jewel]

Then talk to them, not us

[full mantle]

no one answered

[restive crag]

Hi. I'm having issues with the R.A.D modpack. I'm getting the exit code 0

[wild jewel]

Then you wait longer

[last parcel]

cant expect a reply in seconds. people have lives.

[iron jay]

does anyone know what happens?

[autumn agate]

hi guys um i have a problem
i made a 1.18 modpack, added some simple mods and it gives my this crash

those are the mods

[waxen pine]

post the whole entire latest.log file

[autumn agate]

aight

that's the entire folder that appears when i click "open folder"

where do i find latest-log

[waxen pine]

whoops - must not have gotten very far in the loading process

[autumn agate]

yeah it instantly crashes-

[waxen pine]

just try the mcinstallfix lol

[autumn agate]

is it a mod

[waxen pine]

it says it's a mod

i mean try removing it and see if it loads...

[autumn agate]

but in the modpack i see no mod called "mcinstallfix "

[acoustic idol]

!mc-installfix he meant this

[golden musk]

1. Click on the Minecraft Tab on the Left side of the CurseForge App.
2. Click button next to the Create Custom Profile option.
3. Click Repair Installation option.
4. Play game.

NOTE: You will not lose any modpacks or worlds, These are saved in the Instances folder. DO NOT TOUCH THIS FOLDER OR YOU WILL LOSE EVERYTHING

[autumn agate]

ooh

ty

[waxen pine]

that popup message isnt very telling sometimes - it can be an effect of the actual problem, not the cause

[autumn agate]

mhm

[waxen pine]

if you have any JVM arguments you've added in the launcher app box (by the ram/memory slider) try clearing it out

has been a "thing" getting 1.18 to work

[autumn agate]

mhm

imma see if it starts first

downloading

it's so slow-

[tacit cargo]

I am having problem with allthesodium and silentgear

Cant send latest.log cause it too big :/

[last parcel]

you can use gist, but there is no need to send it here. nothing we can do about it. you need to report this to the developers of those mods

!projectissue

[golden musk]

Please visit the project page for the content you posted about and look for a way to contact the developer.
Somewhere on the page there is usually a method of contact. Look for one of the following things:

• Issues tab like the image below.
• Discord link.
• Twitter link.
• Comments section below the project.

If no contact method exists you will either have to remove the project or find a solution on your own.

[tacit cargo]

I think i found the problem, something called ASM9

Error loading class: net/minecraft/client/multiplayer/ClientPacketListener (java.lang.UnsupportedOperationException: PermittedSubclasses requires ASM9)

[solid ermine]

need help.
i will start server. and dis come in the starting prozes

[last parcel]

Failed loading config file powah/energy/generators/magmator.toml try removing this

[autumn agate]

mfw the games telling me i have errors with selected datapacks and i cant load up a world

problem is

i dont know what pack

[coarse nest]

!mc-logs

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[autumn agate]

it doesnt crash

it just doesnt let me load the world

it offers the safe mode thing but doesnt let me

[coarse nest]

the logs will still show what is wrong

[coarse nest]

that log doesnt seem to have the error in it. can you try join a world then repost the log?

[autumn agate]

yea gimme a sec

there are mods that are for some reason 1.17

[waxen pine]

1.18 only came out a week ago. Some bugs like bad links are going to happen until everything gets ironed out. If you're making your own profile should add mods one at a time and check everything works

[autumn agate]

okay

[coarse nest]

Survive seems to be the cause of the issue here

[autumn agate]

any others possible?

[coarse nest]

Its survive tags that are missing, so unless one of the addons references non existent tags then no

[autumn agate]

alr

optifine crashes on start if you have mods too, so i just removed that

[coarse nest]

yeah, optifine is

https://media.discordapp.net/stickers/870448491200127008.png

[autumn agate]

it worked tho

thanks for the help

im adding resource packs for the sky but they dont appear

[coarse nest]

they may need fabulous graphics, or you may have a mod that replaces the sky itself

[autumn agate]

fabulous dont work, what other mod might i need

[coarse nest]

idk, the resource pack should say

[autumn agate]

the pack doesnt require any others

its dramatic skies for 1.18

by thebaum64

[coarse nest]

Go ask them then, they seem to have a discord

[autumn agate]

oh damn ok

[magic mango]

my modpack keeps crashing

can someone help

[last parcel]

?mc-log

[golden musk]

Sending logs for support.

1. Right-click the modpack profile icon OR click the button in the modpack profile.
2. Click Open Folder.
3. Open the logs folder.
4. Drag and drop the FILE named latest OR debug into discord.

[autumn agate]

how do you upload your own packs

[coarse nest]

!mc-packshare

[golden musk]

There are two ways to share a modpack you've made with others...

Export and Share - For Friends to Small Groups.

1. Click the Icon for the modpack.
2. Click the button next to play.
3. Click Export.
4. Select the files that should be included.
5. Send the zip to the people that want it! They can follow the instructions in !mc-installpack to install the pack!

Upload to Curseforge - For Public Release to Everyone.

This options will make your pack public to EVERYONE, it comes with extra requirements and will take some effort to set up.

1. Go to here: https://www.curseforge.com/project/432/4471/create
2. Fill out the information with a proper description of the pack. This should allow anyone to understand what the pack is.
3. Click the Icon for the modpack in the CurseForge app.
4. Click the button next to play.
5. Click Export.
6. Select the files that should be included.
7. Open your Project you made on the CurseForge site and Upload the file you just made.
8. Wait for Moderation & Sync so it can show up in the client! (See !sync for limitations)

[swift haven]

trying to launch Project Ozone 2, the launcher only launches background mc processes I can't cancel?

I've reinstalled the pack as well as repaired mc files but it doesn't seem to be fixing anything

[autumn agate]

so exporting it will post it in a way i guess

SOMEONE BEAT ME TO IT MF

xSHARKIE

GAH

sorry wrong channel for this

[coarse elm]

what

[coarse nest]

You have two mods trying to register dimensions with the id 2. Find the Applied energistcs config file in the config folder and look for the dimension id under the spatial io section. change it to something else

[magic mango]

ok thanks

[oak thunder]

My game crashes immediately as it is started, the log is so short yet I can't seem to find an error

[magic mango]

i did that and it still crashes

[coarse nest]

3 is alerady taken too, try something else

[dawn pulsar]

can someone help me it keeps crashing

heres my logs

[coarse nest]

Can u send the crash report? There are no errors in that log

[dawn pulsar]

ok

um how do i send it over?