#👽︱game-support
1 messages · Page 19 of 1
Why not just make your own custom pack with the mods you want in it?
well bettermc already had like 50 mods we wanted so we figured that since they already made a modpack that is compatible with other mods we might as well use it and add other compatible mods
Mods aren’t guaranteed to be compatible with eachother
Also it’s hard for us to help users that change premade packs as
1 we have no idea what was in the original pack or why the author chose those specific mod versions
2 we have 0 clue of what you added or changed in the pack
Fabyan left
Generally users that change premade packs are on their own to fix it as well. Only suggestion I can give is reinstall the pack and don’t change anything OR make your own custom modpack. It’s easier for us to help you figure out
Guess they figured it out
🤞
nvm fixed it
Help plis
That the full log?
Always post the full logs, Snippets are useless
There you go
Send this file: crash-reports\crash-2022-10-11_21.42.47-server.txt
Does this crash happen when you try to connect to the server?
It crashes when I try to run the file
oh, so you dont try to connect at all? It just crashes on its own?
have you edited the whitelist or ops files at all? or change the server.properties in any way?
I made the modpack, when I just start the server crashes before even appearing online but I was playing like 20 minutes ago without modifiying anything
Is there any way to solve it?
Doctor, will it survive?
Dont need to keep pining me
Trying to figure out which file its pissy with
Try deleting the banned-ips.json file > then start the server again
It worked, thank u so much for your help
hey im having a problem joining a server and i was hoping to find some ideas. im trying to join my friends better minecraft server and it keps saying we have mismatched ores. i triple checked that we're on the same versions. any suggestions?
I was playing my modpack yesterday and when I went to play today it keeps crashing or stuck on loading till I have to force close. Any advice?
jei-server.toml - this config file is corrupted.
go to your <worldsave>\serverconfig\jei-server.toml location and delete it.
Will that save my previous data and stuff?
Does anyone know how I could avoid errors when adding large amounts of mods?
Add them one at a time and test
Generally its a good idea to give an explanation of what your doing when you drop a log.. Post this file crash-reports\crash-2022-10-12_15.18.15-fml.txt
I downloaded the SkyFactory 4 server pack but the StartServer.bat file doesn't do anything when I click it.
I have accepted EULA but still.
Open a command prompt > type java -version
screen shot output
Send servers latest.log
Server ran out of memory, need to allocate some more ram to it
ok
I deleted the file and I'm still getting the same issue
post new log.
Same location as the other file, delete this file: curios-server.toml
Should I repair my installation afterward?
Shouldnt need to. This is just corrupt "serverconfig" world based configs. Happens from time to time.
likely another file.
Should I delete em all or?
Send the log first to make sure it is a file
Yep... pamhc2foodextended-server.toml
lol, any others?
Sadlly it hits the first one it cant read and stops. So would be a lot of trial and error
thats cool, thanks for helping
np
paintings-server.toml
If you scroll all the way down near the bottom of the log and look for "Failed loading config file" the toml should follow. EX:
net.minecraftforge.fml.config.ConfigFileTypeHandler$ConfigLoadingException: Failed loading config file paintings-server.toml of type SERVER for modid paintings
ohh I see
how would i go down to forge 2 insted of 3 a server i play on i cant play now because it is forge 2 minecraft
..huh
Yeah? What?
cant play on a mc server it says it uses forge 2 and im on forge 3
screenshot?
ganna take a min or 2
it auto shuts down after 5 mins of no one on it so it has to get started up
and mc gets up
just waiting for mc to load up now
Are you using a downloaded modpack
nope
Is it your server?
my friends can play they send me the files they use and it did not help too
i have start up perms and friends with the owner
Ask your friends which version of forge the server is using.
if i go below my version it dont work because the mods need 40.1.60 or more
Or if they are using the cf app for their pack they can export the pack and you can then import it into your cf app. Then you dont need to manually install forge
i belive i tested the one obove
they said they do not use the app
i already manually installed forge too
Then make sure you have exactly the same versions as them.
Including forge? Or did you have to get that yourself?
includeing forge
Are you using the cf app for the client? Or the vanilla launcher?
i tryed the app and vanilla launcher
What forge version are they using?
As in getting the same connection error? OR the pack doesnt load
same error happens when i use any forge version
!mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
but i am doing a test rn
Have your friend send the servers latest.log as well
Wait so you can access the server for starting it, are you able to see the servers logs?
nope the server is useing aternos
You can get the server logs with aternos
Any way you can try and contact your friend for the logs?
not right now
Are you able to see the forge version and mc version in the panel at least?
yes if i go to the forge version mc hate me
Able to screen shot what the panel says for mc and forge version?
Tried setting your forge version to match the servers?
Did you update those mods? OR are those the ones your friend sent you?
sent
Did you get a list of mods? OR the jars themselves?
jar
Will likely have to wait till your friend is able to send the logs. Something is wrong here and its hard to debug without server logs
ok
ima deleate all and reinstall from what they gave
i was checking all versions again launching mc now
wait it works idk what i did but it works
strange
Oi can somebody help me with my modpack
I get some incompatibilities and dont know how I can make the mods work together
If mods dont work together you identify which and report the issue to the developers. Then you decide if you want to wait for a fix or remove those mods.
yeah the of incompatibilities that are there supposidly is huge haha
Sorry for my bad english
Even JEI is incompatible lol
Thought I answered this in the other channel? Or do you not have a world backup?
why is it that anytime i run a modpack and this loader opens it just suddenly crashes with no explanation or window popup? when i try running another modpack or the same one it says an instance of minecraft is running but its nowhere to be found, not even my task manager? Is there a fix at all?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
this right?
mac with M1 processor?
yep
if so you're out of luck with 1.16.5. get a modpack to use 1.18+ or 1.12.2 older
alright tysm
hello everyone, I'm trying to play better Minecraft plus 1.16.5 and it loads fine but when it finally stops loading mods I only see saving world and then it closes immediately I tried reinstalling both the mod, Minecraft, java, and deleted most folders and restarted several times and it still doesn't work
hello, curseforge stopped opening minecraft after telling me that a mod had been updated, I updated it, deleted it, restarted the pc and the app and it never responded again, even creating another modpack without that mod. What I can do? the only thing I haven't done yet was reinstall minecraft and curseforge pls help
Hey! I recently downloaded the Sky factory 4 server pack, so I did all the steps, but when I want to start it via the start.bat file, nothing happens.
Any ideas why?
?java
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
hi my game is just not starting, the logs dont seem to indicate a problem so im at a loss as to where to go for help, it only started basically just now, ive tried removing basically every mod but it only runs if i have almost no mods left in the pack despite them all working as soon as earlier today, heres the logs since there's no crash report https://mclo.gs/CVWG7pc
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
it says it failed cause its running, but it very clearly isnt, and i cant even find it in the task manager
restart your computer and then follow the steps
now its giving me an error that says the game crashed in the launcher
?mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
the logs say the same thing which is nothing really https://mclo.gs/CVWG7pc
i can make a new one but it says the exact same thing
:/ don't post the same log and try to pass it off as the new one?...
https://mclo.gs/STXsZd1 im sorry : (
things to try
- do the inistallfix one more time
- install a blank forge profile and see if it will launch blank
i tried blank already and it works
or do you just mean a new profile and re add the mods
- Right click a modpack / profile.
- Select

Open Folder - Go back two folders.
- Open the
Installfolder. - Drag the
launcher_log.txtinto discord.
no need for that can just post txt files
i forgor
remove adaptive performance tweaks mods and the core mod
instead of that i would highly recommend trying adding these. they improve performance in a lot of different ways, enough to make adding worthwhile. (once it does actually load first)
rubidium starlight lazyDFU ferrite core radium reforged
i want optifine tho once its updated, its the only shader thing with distant horizon compatibility
is it do a barrel roll?
hm either polymorph is messed up or this is actually something else
should i try removing polymorph
yup
if not that then you should really rethink this - it could be a mod lurking in your huge assortment that isn't correct etc. you can't dump in dozens of mods together and press play and expect it to work. alternatively there are lots of modpacks published that do work.
ive been making this modpack for months and it worked just fine today, well, it ran, now its not and i didnt even update anything, i tried undoing any updates i had done, and removing all the newest mods but nothing works for whatever reason
also i tried removing that and do a barrel roll neither worked
hey i restarted and i got a new log
well its mostly the same but its got a little more
and heres the launcher log if its relevant
im gonna sleep since its 2am
Did you at some point rename/copy the modpack?
Seeing as it is named "shit (1) (1)"
That could be the problem, not sure.
Yes? Ill try a new profile and readd the mods later
my game is stuck on "loading terrain"
ive tried many different things
yet idk whats happening
ping me if ur gonna try to help me
ive tried launching the game from lunar client and same thing happens which means its not the mods' fault
Ok
So how do I fix it
Ill send u pic
I have 5 mods in mods folder
If i launch game it works
Then it crashes
Doesn't show singleplayer multiplayer option
Just crashes
Then my mc launcher stops working
More words per message
I have 5 mods in mods folderIf i launch game it worksThen it crashesDoesn't show singleplayer multiplayer optionJust crashesThen my mc launcher stops working
@.squizzle...
?mc-logs
?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Carl is having a moment
K
Post those logs, the logs the bot says
Do you want help or not
They are instructions on how to get those logs
The latest.log
It's a hack client mod
There is always a log
For 2b2t
Then you're not getting help, that hack is likely the problem
You aren't getting help here
Then where do I get?
Go to the people that made it
Discussion of hacks or hacked clients is against the discord tos, Minecraft tos, and this server's rules.
hello im new
trying to make a server for me and my friend to play a mod in, and every time I press run it won't work
2 things here.
- Get your server out of onedrive. Like ASPA. Cloud based storrage will destroy a server.
- Need to edit and read what the user_jvm_args file.
it's also probable that that user_jvm_args part is about not having the correct java (you need 17+)
?java
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
Start with the onedrive stuff tho.
idk how to remove it from my one drive
Open a file folder > click This pc on the left > Click your preferred Drive (C) or if you have a different one > Create a new folder > name it something youll remember > put the server in this ne folder
EX: C:\Servers
🥲 I done f'ed up
I tried to delete the files form my one drive deleted almost all my files on my computer
and now I gotta redownload shit
Only had to move the server? Didnt have to delete anything
yeah I fucked up
I can't fine them in my recycle bin
I'ma just do the server then redownload all my files
I just hope my blender files are ok cause if I lost that I lost my portfolio for 3d design 😭
Still unsure why you tried to delete anything. But ok
I jsut wanted to remove onedrive from my computer
ok
Should have moved your files first before deleting files.
Also dont need to keep pining me
ok
Replies ping by default
"2) Need to edit and read what the user_jvm_args file." idk what you mean by this
After reinstalling your server a file called user_jvm_args is created. right click and edit the file. Read the contents of it
yep, read what it says. # == comments
install. java. 17.
open a command prompt and type: java -version
screen shot output
You have java 8. 1.18 needs java 17 as Briar said
!java
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
why are you using 1.18? 1.18.2 is where mods have settled on and developed/bug fixed to
she wants to play this mod and she plays 1.18
The mod that is for 1.18.2?
bruh
easy fix now that you know what to do
Can click on the files name to see what version of mc its for
ok
so I should just delete the files in the server
and redo it with 1.18.2
ok
now we wait
it's been stuck on this for a long time
does that mean it's done or it's not working
click the cmd and press enter.
thankyou
guessing it started loading again?
ye
Likely froze. Could be not enough ram.
I think it's done
yep
so just close out?
Closing the cmd will stop the server.
So if you need to add mods or do configs you will need to stop the server first. Make your changes then start it again
Is the person your trying to play with in the same house as you? OR somewhere outside your house
outside my house
Then you will need to google how to portforward for your router > then give them your external ip. Can get it by googling "whats my ip" or using sites like https://www.ipchicken.com/ for your external IPv4 address
For you though, if you plan to play on the server, and are playing from the same pc the server is running on your ip will be localhost or 127.0.0.1
Only way I know how is to set up a domain and link your ip to that.
Do you need help? Or just being annoying?
Next one is a ban.
fixed
beat me too it
ok so just give her my ip?
If you dont want to pay for anything yes.
ok thankyou
lemme get the mod then forge
I mean put forge into my minecraft
cause I just got it on this pc
Dont forget to set up port forwarding. Otherwise they wont be able to join.
Will have to google how for the router you have. Its not something we can really help with as its different for everyone.
If your not sure can also try contacting your internet service provider and see if they have tutorials or can help with how to forward tcp/udp port 25565
back with a new porblem yay
forge aint download 1.18.2
I keep using the installer but it won't fully download
Did you have the launcher closed when you ran the installer
What makes you think it's not fully downloaded?
it works now
Ok
I had use the installer like 20 times
I doubt that was the issue but as long as it works
heya, i wanted to play minecraft 1.18.2, but some mods say that i have to update to forge version 4.1.6 or above
i just download forge again? or do i have to do other stuff?
are you using the curseforge app?
yes
?mc-updatemodloader
You can update the mod loader within the same game version in the CurseForge app by following these steps!
- Click on the modpack profile you are working with.
- Click on the
button next to the play button. - Click on the
Profile Options button. - Select the mod loader version you want from the dropdown.
- Play!
If you need to update to a new game version, a new profile is required.
tysm!! didnt find this answer anywhere
pls help someone
please someone help
i dk what to do
theres supposedly a GL error and a texture error but idk how to fix it
anyone?
is there a way to remove a mob from spawning?
bro this keeps happening
the server was working beefore
now it's not
the moment I add mods
I bet it could be related to the thing it says on line 4/5
hey 🤫
we dont do cheats here, its against the games eula, which is against discords tos and can get accounts or even entire servers banned.
what? 😵💫
3dskinlayers is client-only and poorly made so it doesn't self-disable on servers
I found that out from trying to have it in a server too
is there a way to put curseforge modpacks into multimc?
ask multimc
where is the discord i couldn't find it
no idea
you're for some reason loading fabric 1.17.1 (not a very popular old version) and trying to load newer mods that aren't compatible
looks like that mod might be back compatible with 1.17.1 but you need to launch with java 17 not 16
how would i launch it with java17 instead of 16?
?java
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
i need it to be fabric 1.17 because i want to use a modpack that needs origins for fabric 1.17
datapack not modpack*
can anyone help with canary class analysis error im having? please im losing my mind
are you saying you are making a mod and having issues?
#⚙️︱authors-help
also you understand this is the Curseforge discord not Forge yes
yes its through curseforge
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
whats the best way to link it?
... are you developing a mod coding java or not yes/no
no not developing a mod
My friends and I have a ATM 8 server we are all able to connect except one person he keeps getting kicked every time he joins the server and gets exit code 1. We've tried reinstalling curse forge java and Minecraft we've disabled shaders as well. Anyone able to help?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
then if this is an error launching a profile/modpack follow the steps above and drag the file itself named 'latest.log' into chat
post the latest.log file of the server after they join attempt
okay thank you
thats the same server i have we might have the same issue
don't assume that
remove optifine and do not put it back. this modpack has other mods that apply shaders that are newer
okay same
rendering mods such as optifine and rubidium do not belong on servers
you have mods that think it is - no list posted in the log so i can only assume
is this a new profile/modpack install?
yes
ok. delete it, do the following fix button, then install the modpack again
?mc-installfix
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
okay on it
Hello there how can one request help with a crash report?
that is not the server log after your user friend tried to join server.
okay ill get that for you sorry
hmm a lot going on there. i'm kind of wondering if it was a problem between carry on and ftb junk
what would be your recommending fixes
after 2weeks playing with this mod pack this is the first crash i had with ftb
its almost done but i wasnt sure if this meant something too:
[Canary Class Analysis/]: Canary Class Analysis Error: Class com.talhanation.smallships.entities.AbstractCannonShip cannot be analysed, because getting declared methods crashes with NoClassDefFoundError: com/mojang/blaze3d/vertex/PoseStack. This is usually caused by modded entities declaring methods that have a return type or parameter type that is annotated with @OnlyIn(value=Dist.CLIENT). Loading the type is not possible, because it only exists in the CLIENT environment. The recommended fix is to annotate the method with this argument or return type with the same annotation. Canary handles this error by assuming the class cannot be included in some optimizations.
it says that on server side when my game crashes
then report it to the modpack author
okay so i followed the thing and this time it gave a crash exit code -1073741819
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
hm i'll look in a bit myself - busy atm
no problem, i really appreciate the help
i installed and the above pack and it loaded to the main menu. try giving this more ram/memory and doing the installfix again to get a clean slate
?mc-ram
well im getting to the main menu, the problem is loading into the server
ok so one more time and that's the last - post the latest.log file OF THE SERVER for any help on this issue. If you don't have access to that you will need to contact the server owner
looks like
https://www.curseforge.com/minecraft/mc-mods/small-ships
is a garbage mod
what do you mean? i should get rid of it?
THIS IS AN ALPHA RELEASE INTENDED FOR TESTING AND DEVELOPMENT ONLY AND SHOULD NOT BE USED ON PRODUCTION SERVERS. BACK UP YOUR WORLDS AND FILES BEFORE LOADING THEM WITH THIS VERSION.
ATM added this to their pack? 🤦♂️
you should probably be talking to atm about this tbh
idk, im just tryna get help from anyone willing
pack devs should be made aware of issues with their packs, and they are better able to assist you with issues
okay ill see if they have a discord then
They do its just a pain to find
ATM Discord: https://discord.com/invite/allthemods
Ok
So this bug has happened before
But now it's doing it alot
Lemme record it rq
I try to join a single player world and it trys to join a server?
I don't have any servers put in
It cant send because it's too long :/
So what happens is that I join a world and it goes to a black screen for a few seconds, then says sm like invalid player data, to which I then click cancel and it goes to my server list as if I tried to join a server even tho I wasnt
This has happened before on other launchers but it usually works the next time I try it
But here it just doesnt
I've made a few worlds and none of them work
I'm pretty sure it's cuz I'm trying to load to many mods of my doodoo computer
Nvm
I just deleted that modpack
made a new one and it crashes on launch
!mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
i looked at the logs and it says sm abount enchant giver
ok?
Tried removing that mod?
no because its in a folder with what looks like alot of api stuff
like i didnt put that in my mod folder
are you using the cf app?
yes
Are you using the app to install the mods? OR are you downloading them from the site and putting them in the mods folder?
using the app
Make a new pack, same versions as this one, add no mods to it. Just hit play. Let me know if it boots
should i remove the enchant giver thing?
cuz what im thinking that is is to give mc dungeons weapons random enchants but idk if it does that
ill do that rq
mcdw remove that
what does that stand for
Assuming the mc dungeons weapons mod
oh ok
thats kinda what the modpack revovles around tho but ill remove it
so should i remove that or make a new blank one first?
Try without it see if it works. If it does try a new pack with just that mod in it, with no other mods. See if it works.
ah ok
well it works now
but i rly want the mod to be in it
could i put those mods in but remove the enchanter thing from that one file?
i feel like thats kinda risky becuase its in a file with alot of other api/library stuff
ima try it
first im gonna add them back to see if it woks now before i rmeove the enchnter thing
i added the mods back and it seems to be working now??
Best to report issues with a mod to the author of the mod so they can fix it.
someone help me
say what you did to get your problem and what mods might be involved
i try downloading a redux resource pack for lycanite mod it same version and then this happen i tried restarting the game didnt help and also tried redux 32x also didnt help
please send help as fast as you can please
Are you loading them in the correct order?
I don't know :(, if have tutorial please show
this seen slightly better right
Hello, i have a question. I have am a forge 1.7.10 server and made the ports, but my friend can't join it. The IP Adress that he have is right.
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
remove optifine
how can i add optifine ?
i said remove it, not add it
i did remove it but i want it added cause it isnt in the mod pack
it works without it
!mc-optifine
If you have issues with Optifine, remove it. If you want further support try the discord found on their website.
https://www.optifine.net/home
Installing Optifine with modpacks on Curseforge:
- Right click the modpack icon, select
Open Folder. - Put the
Optifine.jarinto themodsfolder. - Now start the modpack.
Game? or what are you trying to do?
kerbal space progam
download this mod and its telling me to drag it into "KSP_zip"
Use CKAN for Kerbal, the cf app doesnt work all that well for it.
I dont play Kerbal
hey um im having the issue forge installation error code 1 can someone help ?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
i dont have a modpack i cant download one
!mc-installfix
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
Hallo I have an issue with all mods I play with. A few weeks ago I startet playing Minecraft with curseforge and had the problem. I select a mod and play it. When I restart my system and start the the world, it get stuck in the loading screen. I increased the RAM up to 13 gb and that happened with 3 Modpacks. I deinstalled everything and installed it. But it didnt work. Does someone know how I can fix that? I know that the mods should have no problem, cause I see some youtuber playing the same.
It is very unlikely that you need 13gb allocated. Having more ram allocated than required leads to more problems.
Just because you saw someone using the mods you have doesn't mean they will work. Mods have versions, and different versions may not work.
You should try removing mods until you get something that loads, then use that information to figure out which mod was the cause and report the issue to the mod developer for a fix.
Thank u. I downloaded it from a german youtuber with a pretty big community. They play it too so I think it should work but I will try your advice
If they made this pack, you should ask them for help with it.
Ok thank u
Getting a crash every time it loads
A binary search is a way of finding a faulty mod/plugin/addon when you have a lot of them, but without having to remove them one-by-one.
The procedure is simple:
- Take half of the existing mods/plugins/addons, and move them out, into another folder.
- Run the game.
- Does the issue still exist?
If YES: Repeat from step 1 with the current things.
IF NO: Swap out the current things with the ones you moved out, and repeat from step 1. - Repeat this process until the problematic mod(s)/plugin(s)/addon(s) have been found.
anyone have an idea why it stuck on this ?
!nospam
✅ Keep channels on topic.
✅ Use the proper support/chat channels.
✅ Check #👋︱welcome to learn about the channels.
⛔ DON'T Copy paste into multiple channels.
⛔ DON'T Ping or DM unless requested.
⛔ DON'T Report projects on Discord ➡ Use the website report feature.
⚠️You will be timed out / banned according to moderation judgment.⚠️
Keeps crashing right after I click single-player, any ideas?
I'm making a new modpack to play but everytime i try to launch it it just does nothing
does crash or anything
and usually the mods im using work together, but i am using a new version of minecraft
add the mods a few at a time to make sure they work
And make sure they are for the correct version of Minecraft as well. Mods most likely won't work between game versions
Anyone?
im using curseforge so that shouldnt be a problem
there is nothing specifically indicated in your log. you'll need to remove mods until it works. also you have way too much ram allocated.
i checked the log and theres a few things it might be but honestly the logs alwasy confuse me
also its saying im missing forge?????
the thing you highlighted is unimportant
alright what about the forge
it downloaded the forge version when i made the instance on curseforge
on its own, doesnt mean much. could be that you have a mod of the wrong version. could be nothing at all
alright ill try to figure it out
Too much ram? Explain.
Minecraft will use all the RAM you give it and giving it too much can cause other problems
ive been trying to play this mod pack called vault hunters but everytime i get in the game and try moving i get frame drops like crazy anyone know a fix for that cuz it happens with other mods too. my specs are pretty ok its a i5 10400f and a 2070 super
Hi,
I am having a problem starting AotM 7 to the Sky. I downloaded it and i can't start the modpack.
this is what it says: HTTP server doesn't seem to support byte ranges. Cannot resume.
Does someone know a fix for this?
Can you uh screenshot the error?
I fixed it!!
thanks for the help!🙃
anyone know whats going on i want to test out this mod i made but its been stuck like this for ages like 2 and a half hours
Does someone have experience with the Mod **
Open Parties and Claims** How do i add players to my Claim? I claim via Xaerox Minimap/WorldMap
Use chat commands to create a party and then add allies to that party
To allow other parties allied to have access to interact you must uncheck these two boxes
worked thanks!
It's a nice mod it just needs some more intuitive UI and/or wiki
yeah... normally its just /chunk name add user lol
uhm how do i delete parties? becuz now everyone can just do stuff on my claim
Undo your button permissions and then look over available commands in chat
hey so i need some help everytime i lanch my modpack its crash half way throw loading it
Alright so something wrong with my friends thing when he is installing a modpack it says "java exception occured" and he does not know how to fix this any ideas why this happens?
?mc-installfix
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
@tardy void post a screenshot or latest.log file of console output
Keep in mind there is no such thing as a 'curseforge server'. All server packs uploaded to the site are made by modpack authors.
!outdated try the clean install link at the bottom of this
To use CurseForge with the latest features & fixes you should update your CurseForge App.
You can do this by uninstalling the app from your computer programs and then install it again from https://download.curseforge.com/
NOTE: Uninstalling CurseForge will not remove any game/mod data, It's entirely safe to remove and install again!
hi, could anyone help me with my crash report?
it was working fine yesterday and now all the sudden it just started crashing on load up
It's either corail tombstone or optifine messing things up
The mod corails tombstone is alive but on newest mc versions. Unsure if they would still support bugs with that old 1.12.2
alright I will give it a try thank you
it worked, thank you very much, makes sense tho, kinda crazy how 1.12.2 is old now lol
Good news - they make newer now 😛
Hey, i am trying to setup a Create flavored server, just a simple one so me and my friend can play together, but when i agreed to the EULA, i get "Error: Could not find or load main class @user_jvm_args.txt", what should i do to make it work?
My friend and I 😉
Anyhow - most likely you have incorrect Java installed. Check that first.
?java
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
You can have multiple versions of java installed
I think i figured it out, thank for the help 😄
it says i dont have java installed what should i do?
assuming this means the message occurs when you try to install a minecraft modpack?
that's MC 1.6.4 - it's crazy old. it won't even work unless you go find (on the internet - it's not on curseforge) and include the mod 'legacy java fixer'
i found it but it wont let me access it
Hi, I have some problems with fps, especially when I use shader-packs
I mean, I see other people on yt with many fps and when I test mine I have few
Either it's because minecraft is not a very well optimized game or because I don't know how to make the settings for performance
For example, if I play normal minecraft with shaders I have 40 fps, if I play with 200+ mods I still have the same fps
And I have a good laptop
6-8gb is the normal recommendation. Start with that. If you need more then say 10gb, pack may have other issues.
i cant load into curse forge
hello when I turn on any modpack on my microsoft account tells me, I dont have bought minecraft and im must play on demo version (im buy minecraft in may 2022)
You need to use a Microsoft account that owns Minecraft. The one you signed in with does not own it.
i need help game crashes when i go on a world
it works fine starting up but if i go on a world it crashes
happens on both windows and linux
ill just play on ftb rev with added mods for now until some one helps me
i think it might be opengl but i dont know
help
hi uhhh im getting an error code saying " No java executable found. Cannot execute post-installation tasks for forge." and i cant find anything anywhere please could someone help if they know how to fix this?
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Not Too sure Try Re Installing Java
oki ty
What’s Wrong
It's already solved, sorry for disturbing
Ok, Thanks
Honestly, I Have A lot Of Experience With Java, Coding , Minecraft etc
I'm trying to play R.A.D with a friend, but this pops up. Solutions?
Install the same pack version as what is installed on the server
Hello there i have a problem where (i believe its something with forge) yesterday my game worked fine it launched and now it doesnt launch i tried vanilla which works fine and also forge without mods which didnt work (i use MultiMC)
Fixed it
Hello, Im using curseforge and trying to launch minecraft but minecraft doesnt launch can anyone help?
nvm i got it
it does this when i play certain modpacks how do i fix
somehow i cant join my friend when we are on curseforge but we can join when on normal mc
?mc-installfix
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
Anyone how to fix the error of, Analyzing the mod folder contents took longer than 60 seconds. This may be caused by unusually slow hardware,
X pathological antivirus interference or other issues. The timeout can be changed with the system property
fabric.debug. discoveryTimeout (-Dfabric. debug.discoveryTimeout=<desired timeout in seconds»).
I’ve tried everything but haven’t been able to get it to fix
What? Start from the top here. Are you using the Curseforge app to launch a modpack?
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
trying to make an online mulitplayer server using the forge install to server option and this is what its giving me when i try to launch it... any ideas?
[23Oct2022 00:09:07.641] [main/WARN] [mixin/]: Error loading class: java/lang/String (java.lang.IllegalArgumentException: Unsupported class file major version 63)
that means the mod is compiled for a different java i.e. mod is for the wrong MC version. i think it's 'citadel'?
i have the cursed forge app and the versions all seem compatible with the version 40.1.84 on forge including citadel
if i were to get rid of this mod, would it fix the problem ?
ty for ur help n response 🙏
make a duplicate profile and see if changing the version of citadel changes anything
actually the log is a bit unclear that way - it could be another mod that this is about
yeah it didnt work @_@
you'll have to play around with mods to figure out which one it is i believe. there are lots of modpacks that do work that you can get instead
im going to try adding it one by one and see if that works
would i have to reset the server each time i add a mod ?
yes. really though highly suggest you make a test server if that is what you are doing and mess with the test copy
will do ! ill let you know if i need any more help, thanks a bunch !
hey guys, I’ve got a problem. at the moment I play a modpack. when I go into the ingame settings, change the gui size, close and reopen the settings it’s back to gui size auto. does someone have an idea why it is auto resetting, cause it’s really annoying. (it’s in minecraft)
i need help with my modpack i made it keeps crashing but without a crash message or anything the minecraft launcher appears but when clicking play it starts to load closes it self and trys to open minecraft but it doesnt.
?mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
drop that log into chat. the one named exactly latest / latest.log
let me launch it with all the mods enabled i tried to enable and disable some
it worked but for a small time
after i selected one more mod even when disabeled it would do that
mod count is irrelevant
[17:12:42] [main/ERROR]: Missing mandatory dependencies: playeranimator, playeranimator
you're missing that mod - which another mod requires
oh
let me fix that
small problem
seems like the game broke
since mincraft is running
i cant install it
but it doesnt appear in task manager
then restart your computer
alright
i have the feeling that you're going to need to do a -
(after you reboot)
?mc-installfix
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
im back
so it doesnt work
it pops up
and goes away
after like a second
one question
do i export my profile so i dont lose it or?
you can make a duplicate if you want, or make an export if you like also. up to you
#👽︱game-support message
did you do this? yes/no?
you can.
did you do the repair intallation ^^^
Hi, when I launch my game with forge, it crashes before loading in game
i will do it after i duplicate the modpack
i dont want to lose it
?mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
It crashes with white screen. Can anyone help me please?
imma update you i had to restart my pc again cuz minecraft bugged it self out now its launching
Mine doesn't even launches 😂
those codes are useless - got to post new latest.log for every crash situation
I responded to you asking for logs. if you want help you need to listen for questions to fix your issue.
Okay
I will send the latest one
you have 'config file disease' that happens for some bizarre reason with forge 1.16.5+ sometimes. you need to open your profile folder and delete the entire 'configs' folder. next time you launch new fresh configs will auto generate
yes
Alright thank you
its launches
better costumer service than anything ive seen so far
Cheeseman - the log named latest.log -- *.gz files are archives
it is the latest but lemme check
oh ok
here
i have a run.bat
in which i put 4 gb
i am running the forge file in the server btw
my server wont work at all and its strange
1.12 works
but 1.16.5 is funky
no mods either
it's having an issue connecting with the forge server for version check?
can you post the crash-report.txt file referenced in the log
show the start line you are using to launch this? in the run.bat
screenshot the contents of your server folder?
On Windows
Press Win+R on your keyboard, and paste notepad %windir%\system32\drivers\etc\hosts
Screenshot/Copy the contents and paste it into the chat.
On Mac/Linux
Open a terminal window, paste cat /etc/hosts
Screenshot/Copy the contents and paste it into the chat.
ok that's fine.
weird - something is up with web connection but i can't tell if the info is there what exactly. someone else might have a bright idea. try checking your antivirus programs if any are not blocking connections, etc. try installing a new fresh copy of the server files to a diff folder and trying that one also
i did the last thing, this is my 3rd attempt
my 1.12 didnt work either
i just reinstalled it enough and eventually it worked
¯_(ツ)_/¯
this would be easier if was simply a case of 'port already in use' lol
i wish
darn lenovo ideapas
ideapad
i guess im about to redefine insanity
alright so one wierd thing is i dont have a 1.16.5 json, any clue @waxen pine ?
they stopped doing that in the lasst versions of 39
Aha - I wasn't crazy
If I want to turn off a mob from spawning, besides turning their spawn group sizes to 0, and spawn naturally to false, should I also turn the mob spawn weight to 0??
would it be good to lower both spawn weight and ranges, to create a smaller range, even thoough the mob spawning is 0 and false? to make less strain on the game?
*for entity spawn weights and ranges
probably a good ide
can someone help me pls
i have tried different java versions, but cant figure out the problem
Have you asked MultiMC?
I do not know, this is CurseForge, a mod manager, like MultiMC.
Yes, MultiMC has a discord, I’m pretty sure a link to it is in their client and I used to be in that server
my modpack keeps crashing and im done looking for the issue myself
help please
Eyo someone who knows something about the minecraft mod big reactors
because I have just built a 5x5x5 reactor with the cooling dia blocks on a layer of cryothium and on it a layer of gold blocks I turn it on only it does not give any power output
when load up my world it crashes before i even move
screenshot your reactor layout perhaps? how many fuel rod stacks are in the middle? you've also used a port to input enough yellorium / uranium? what minecraft version is this pack based on?
Replied the first place you asked
let me get it all for you in a sec
what do u mean w the reactor lay out just a pic from above or where my controler is ect?
I have 1 fuel rod in the middle I do have I think enough yllorium in the core but I can try filling it and then looking
and its based on 1.7.10
Yeah a pic of the outside and one with the lid (top layer) off would be good. Oh 1.7.10 -- ooold 😉
old but gold
project ozone 2 reloaded
Hmmm. And it forms a multiblock with the top on? You can access the controller GUI to toggle it on/off?
ye I am just gonna try filling it 100% and look if that works
So fyi changing the moderator vertically is not helpful - radiation travels horizontally only. Here's a super cool layout example.
Diamond blocks and lesser needed enderium blocks spread out the radiation, lead blocks absorb it to the outer casing wall. It's funny just making a 3 block tall reactor with this layout so only 1 layer 'guts' and having a hyper efficient fuel burn for the RF you get
help
You need the mod 'JustEnoughIDs'
thank you
the mod is already installed
Hey, has anyone had trouble with Bagnon? Where the option to right click to view bank inventory option is missing?
For Wow Wotlk
what minecraft version has both Tinkers Construct and Create and fabric or forge
1.16.5, 1.18.2, 1.19.2+ forge
thanks
Is there a way to turn off certain ores from generating in the world? from mods?
Also how do i turn off items from dropping from mobs in a loot table?
Ores -> check the mods config files, most put all that in there.
loot -> if in 1.12.2 and under crafttweaker has a way.
-
1.13+ Uses Datapacks, so mods like Kubejs can handle those
Both CT and KubeJs have decent wikis for the how to part
i need help posting a modpack on curseforge and i am looking for a co-owner for my modpack, Dm me if you can help
Please stop spamming this all over.
You asked first in cf general. This is a support room. If you are looking for someone can either make a post in #1032223688180895804 OR find someone you know that you can trust. Co-owning with people you dont know can be risky
I’m using Minecraft 1.16.5, and the mod spheric, but I don’t see the mod in the config files to edit, to turn off one ore, but I can blacklist items and recipes, but the ore will still spawn but just not have a use besides being pretty gem
Tried their discord? Link is on the mods project page
Would anyone know why rlcraft wouldnt launch?
i mean like for me it doesnt launch
and as i noticed for other people it does...
i tried any method i could possibly imagine
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
figured it out, as for spawn mob loot tables, how would one make an item not drop/blacklist? I know how to blacklist items and recipes and such, but not mob drop items
im having an issue making a world in minecraft as it is being made it has an issue with reasource packs but the only resource packs active are one i can remove to allow the game to make a world
I made a modpack for 1.19.2 playing on Forge 43.1.1. It works when I click "Play" in the CF Launcher and brings up the Main Menu for the Minecraft Launcher. When I hit "Play" on the Minecraft Launcher it does its green loading bar on the bottom, but does not actually load the game up at all and there is no error code given. There are only 78 mods in the pack and the only big mod in there is Create. I am not sure what is happening here and I do not have McAfee and not sure what other way can fix this. Some help would be greatly appreciated
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Remove Optifine and try again
ok
I took Optifine out and it still did not actually launch
I apologize for being dumb with reading these and understanding them.
Task manager shows that there are instances of Minecraft running in the background and they just look stuck. I completely closed them out and I just am not sure what to do.
Failed to build unique mod list after mod discovery.
net.minecraftforge.fml.loading.EarlyLoadingException: Duplicate mods found
hmm
So, it looks like you have duplicates of a mod inside of the mod folder.
I looked through the mod list and there are no duplicates
REI and JEI cant both be on the same profile. they are are both the same thing - hence the 'duplicate mod' message. remove one of them and their sister mods (JER / RER, etc)
Yeah, I noticed that. I really appreciate all your help. I must have accidentally added both. It was such a rookie mistake lol.
Hello I have actually joined recently and have found an issue with my minecraft game not loading
At first I closed it and tried again but when I tried again and waited for over ten minutes it still wouldn't appear and when I checked task manager I only saw overwolf
Oh wait I am having a similar issue as the guy above
And the uh green bar keeps saying it's downloading stuff and acts wierd each time
Restarting doesn't seem to be a cure either
!mc-installfix try this
This is NOT instructions for Repair Profile! They are NOT the same! You need to do this!
- Click on the Minecraft Tab on the Left side of the CurseForge App.
- Click
button next to the Create Custom Profileoption. - Click
Repair Installationoption. - Play game.
NOTE: You will not lose any modpacks or worlds!
Thanks
@acoustic idol sorry to bother against but it is saying the game is crashed and is not able to continue
!mc-logs
- Right-click the modpack profile icon OR click the
button in the modpack profile. - Click

Open Folder. - Open the
logsfolder. - Drag and drop the FILE named
latestORdebuginto discord.
Please stick to one channel.
sorry
Can use a paste site then. Like pastebin or gist hub to upload the file to then send the link
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
Pack you made?
Just some mods I added onto my profile
Using the app itself to install them?
Yea
If you make a new custom profile, same mc and modloader version. Add no mods just play it does it boot?
Lemme check
Yea
Wait one sec
Yes
Yes it works If I do it just plain
And the same version
Likely a mod causing the issue then. Which one tho im not sure...
Best option would be install 1-5 mods in the new profile. Then test the pack. If it loads repeat. If it doesnt remove what you added then test to see if it works again.
Seems to of been better combat and the animation stuff or geckolib
Thanks man I had found out it was the most recent Geckolib
Be sure to report this to the mods devs so they can look into it
my modpack syas this while trying to load into a world internal exception java.nio.channels.closedchannelexception
Was still waiting on your log in the other channel.
Like I told you, dont just say "it didnt work" and wait for us to chase you for the log. Be proactive send the log when you tell us it doesnt work.
anyone know how to work the .json files of variants for mobs? in particular it would be variants of bears & big cats for untamed wilds
I've gone over it, still not exactly sure if possible to isolate/make only certain variants or restrict the mob to spawn in specific biomes, meaning only for example if it can only spawn in jungles & taigas, it'll only allow tigers & saber tooth cats & snow leopards to spawn for example
I think that second part would be in the last part of this wiki, in 'spawn biome data'
yo
im trying to download the server file
but when i click the minecraft server jar
these files are made
i can launch the server
but where do i put the mods?
Need to start the forge jar for modded
Need to make a start.bat file for ram settings
Open a command prompt and type: java -version send output
!java 1.16.5 needs java 8. you have 19
Minecraft requires specific Java versions to run, pick the correct one for the version of Minecraft you are playing!
Either need to unistall 19, or make a start.bat file and point to the java8s java.exe file
how do i uninstall 19
Same way you uninstall any windows program.
alright done
Right click in the server folder > make a txt file, name it start.bat , be sure to remove the .txt at the end. so that the file looks like this
That will start a vanilla server
o
Need to put the name of the forge file if you want a modded server
like this? java -Xmx12G -Xms11G -jar forge-1.16.5-36.2.34.jar nogui
also 12gb is a little high. 6-8gb is good for most servers as it doesnt need to render anything like sp
for 114 mods?
6gb should be enough
Mod count doesnt matter. Its what the mods contain and what they do that does.
Worldgen mods and mods that add more items can be harder on the pack then little mods.
i will be playing with 3 people
so ill do 8
i have 32 anyway so i dont mind
what do i do now
Minecraft is also different from other games. More ram can actually slow down the game instead of making it faster. As MC is a single cpu core came. MC will also try to use all the ram you give it.
Start the start.bat file
ohh
yep just did that
now there's the mod folder
thanks awesome
also can i ask something else
i spent 3 hours trying to port forward a vanilla server
i quit
but in the end
i just got some app which told me the ip of my ports or something
and it worked somehow
this was the website
If you got the port up and working shouldnt need to do anything else. As log as the server uses the same port /pc as the settings
Np enjoy
uh oh
it crashes instantly
think there's a bunch of fabric mods
what does this mean?
whaaat
would need the full log.
ill remove champions since it doesnt support scaling health
It does, your version is just old.
icon in the bottom left to open settings.