#palera1n
1 messages · Page 106 of 1
yeah...
Must’ve always unlocked it out of habit then, sorry
yeah.
I dunno then tbh
what would happen if i restored it with a different ios version than the blob supports?
I don’t think it’d work
Then again I’ve not tried to, but I imagine it wouldn’t because the SHSH blobs are iOS version specific, so they wouldn’t work on a different version, however that works
is palera1n now works on ios 16.7.11 iphone x?
Dunno about the specifics
and since when?
yeah. so my only option is to guess the ios version?
It does
Unless someone with a better way to go about it chimes in, I dunno if any better way
You can check the changelog for yourself if that’s what you’re asking
welp. thanks. time to try 15.6.1 i guess.
I don’t keep tabs on palera1n developments
Try making a thread, perhaps someone with more knowledge on the matter might be able to help you out
I have an iOS 15.8.x iPhone 7 with palera1n on it and I tried installing zestu but I can’t find a way to activate it after it downloads. Is there something I need to download to get the tweaks to show up in settings?
it did work last month
its worked on that version practically since it came out
idk why it didnt for me
it completes everything on the mac but there is no application appears on the iphone
nor the rootful or rootless ones
should i just restore to 16.7.11? i would like to use passcode and face id but guess as of rn i have no other choice
what are you doing
who told you to dump blobs

you need to read the whole github page obviously
no shit. it didnt wanna reset.
how did it not want to reset
all you showed was trying to dump blobs
ran the ./sshrd.sh reset and it just didnt do it. imma try again when i get home.
I think we noticed that section already bro
I don't think you needed to post that twice
normalize sending error pictures
🚀
did send one at start. noone replied
where
you sent a picture where you couldn't boot a ramdisk
yep. i asked for help but noone replied.
are we reading the same things?
yes.
but that was the ram disk.
the dude told me to use 15.7. that didnt work, used 15.6.1 ramdisk
(just use something like "14.8" or "15.7" for the OS)
meaning in the range
and you got it to boot with 15.6.1
so whats the issue
with running the reset command afterwards
not home rn. imma try when i get home again.
aight. i got home and i already booted into the ramdisk
welp. i did it. its showing the erase screen (apple logo with the loading bar)
holy fuck. its on last ios 15. the 15.6.1
so close to being not usable while jailbroken.
on iphone X????
click the ota tab
15.7/15.7.1 was AlternateSU for iPhone X
15.7.2 was only available as an RC for iPhone X
hello i am new i wanted to learn what can i do
What you want to learn
unlocking iphones
not happening
why?
because apple isn't stupid
ok unlocking tools ?
did you just refuse to read
what i said
do you have eyes

yeah selective reading goes crazy
bla
Is there any way to upgrade iOS past the phones max iOS

!t nosep
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
What Will happen if the device is Still botting on pongo os and i disconected the phone
Help
I am scared cuz i disconected it
You can disconnect when you can type again on linux
Or mac
hello
i have a problem
when i try to jailbreak my iphone 8 with palen1x when i jailbreak it it says lisub error another but when i force revert it puts palera1n and idk what to do to jailbreak my phone
show the full error
if i downgrade palerain to this version and jailbreak my phone that currently jailbroken with the newest version of palerain. will the process be the same as the current version of palerain?
no downgrade, no problem
wym?
i did everything through terminal because i have a mac to jailbreak on the newest version of palerain. if i downgrade to this version, will the steps be the same? everything will be done through terminal?
instead of this would i just run this??
????
can someone help me please
yes
just download palera1n-macos-arm64 since you said you were on arm
then open terminal and do cd ~/Downloads, then ./palera1n-macos-arm64 -l
(this assumes its in your downloads olfder
folder*
it will not fix your pokemon go issues more than likely
that's what I said multiple times already, but apparently the pogo server insists on it
the unignorable urge to join and call them morons
lol I fixed the issue I had with it there’s nothing wrong rn but if I do this then I’ll be able to use the current version of Pokémon go instead of having to spoof the app with the tweak
do i still need to run this first?sudo /bin/sh -c "$(curl -fsSL https://static.palera.in/scripts/install.sh)"
use latest palera1n and dont play pogo
there should be "dont"
When I do the ./palerain -1 it says no such files or directory?
you made two typos
it is ./palera1n-macos-arm64 with a one not an i, and the ending is -l with an a lowercase L as a lizard
I also made a typo in the original command, that's my mistake
how do i fix this?
you forgot a space
go to settings -> privacy and security -> allow
if that doesn't work, do xattr -d com.apple.quarantine ~/Downloads/palera1n-macos-arm64
how long should it take when it says booting pongo os… and it shows the apple logo glitched out?
nevermind i think i got it to work, i did the pongo loop stuck fix and it worked
thanks for the help
i apreciste it
where would it show the version of palerain your using??
palera1n --version
no on the iphone
oh okay got it thanks
Hey i’m new to this, i want to jailbreak my ipad 7 (ios 18), any options for jailbreaking my device with a PC? I don’t have neither macbook or linux
read above - if you only have Windows use https://ios.cfw.guide/using-palen1x
A complete iOS jailbreaking guide, from stock to jailbroken.
do keep in mind that palera1n currently only has support up to 18.3.2 (though I suspect that will change in the near future)
@nova gyro Hey, can you please DM me? I have a reverse engineering question.
Will I be able to play clash Royale or clash of clans a after doing this
Do not follow those guides
So still no way to play those games on palera1n?
No i dont think
😔
if palera1n roothide then yes
So I’m trying to jailbreak my phone with palen1x rn but when I click start and my phone boots back up it’s not jailbroken can someone tell me what to do here
are you first jailbreaking or rejailbreaking after reboot?
When I tried it the first time nothing happened so I tried again I’m also very new to jailbreaking so I don’t know much about this stuff
are you using windows, mac or linux?
Linux
Guide to installing palera1n
I just did this and Palera1n app still isn’t there
!t palera1nshortcut
Hey @past trail, have a look at this!
Use this tag to force the loader app to open when you may not be able to yourself.
It’s still not there
I saw the palera1n when booting my phone but now there’s nothing there
@past trail what device/iOS?
iPhone X iOS 16.7.11
have you previously ever set a passcode?
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
Ohhhhh
Thanks
Can I just factory reset my phone because when I try doing erase all content it asks for my screen time bow which I don’t remember
I don’t really care about the data on my phone I don’t have anything that important and all my contacts are on the cloud so couldnt I just factory reset?
erase all content and settings on device is a factory reset
Any jailbreak expected for IOS 26?
If a jailbreak for iOS 26 releases in the next 3 years I will eat a picture of your pfp live
(Not including appletv)
How do I get Pokémon go with palera1n
just download it on the appstore 💯
Do I have to inject anything into app or do I just download the spoof tool I wanna use and I’m good to go?
Can I pm you ?
I have palera1n on the phone but what’s difference from that and dopamine. Do I need both or just one to use spoof for pogo
palera1n uses hardware based exploit, can't use passcode
while dopamine uses software based exploit and can use passcode
another big difference is palera1n requires a computer
while dopamine doesnt
although you might need a pc to get trollstore and sideload dopamine
there are ways to get trollstore without pc but im not gonna tell here
server rules prevent it from saying
So does iOS just matter to jailbreak
yeah
device too
device is so to see if its compatible with palera1n
palera1n shouldnt matter too much if your device is compatible
unless youre on an ipad 7th gen with latest ios 18
I have a iPhone 7
but what ios
15
Guide to installing Dopamine using TrollStore
are links from said website legit
yes
wait wheres the guide for palera1ne
yes
where am i supposed to put the iso file
In the usb?
after I jailbreak, I can no longer make in app purchase anymore, it works well before jailbreak any solution?
im a dumbass i didn’t read the last step
why ?
anyone know ?
do you have secure boot on
if you do grub2 mode
thats how it worked for me
Ok I just Unplug and replug the device during the process and it worked but when it correctly boot with the Paler1n logo on the device it instantly shutdown and turn on without Palera1n
idk
... huh??
oh this is an apple tv
why does it say apple tv 4k advanced here
Any jailbreak for MacBooks with m chips
??
idk but now it work the last problem is that when it boot and load the Palera1n screen
it shut down and turn on in normal mode
16.7.11
did you have a passcode before
it used to work few weeks ago and I put a pass code few days ago
oh
I removed this passcode
you need to factory reset the phone
🥲
Get checkl0ck or fakepass from sileo if you want a passcode
On havoc repo
Checkl0ck and fakepass mfs when I
!t reboot
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
My phone died and now my jailbreak is gone can someone tell me how to re enable it
just run the same command again
No
not unless your device supports another jailbreak
Does this work for mbp a2338?
yes
Even with fmi
Is there any tweak I can use to get Apple Pay with palera1n
no
they are joking
palera1n or any jailbreak does not work on any mac*, why would it
also
!t icloudbypass
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
I have an iphone 8 on 16.7.10. I keep following the instructions for installing palera1n, and I get as far as pongoOS booting, but after the palera1n screen pops up, it suddenly switches to the regular apple boot logo. No idea what to do; I reset the device and made sure not to enable a password.
thats intentional isnt it
does the palera1n loader not appear
it does, momentarily
then the screen goes black, and the white apple logo pops up and the phone boots like normal
make a shortcut to open palera1n loader
oh
are you 100% sure theres no passcode
it would be better if u sent a video to see whats happening
I'm positive. Do I need to have the phone set up before I do it?
wait
is it still on setup
I reset it, and the first time I tried it from there. After it didn't work the first few times, I set the phone up, skipping the password portion. I did have to put in an "old" password to verify the apple id, but the actual phone doesn't have password or touch security enabled.
so basically the phone is not on the setup state
you can access the home screen
Yes
okay i want you to do the jailbreak again
then create a shortcut to open the palera1n app
wait
@cerulean storm what are you using to perform the jailbreak
like a mac? windows computer? from usb if windows?
MacBook. Phone connected via usb-a to lightning. I’m running the process in terminal
okay cool
Following the instructions laid out on the guide. I have to unplug it and plug it back in after the “eureka” prompt, but that hasn’t presented an issue.
eureka?
can you record a video of you doing the jailbreak
i wanna see how are you doing it
Sure, one sec. Gonna try to incorporate the shortcut.
Ah, sorry. I will avoid odd phrases then.
i recommend https://deepl.com if your language works on it
okay yeah youre doing it right
so is your issue the palera1n app not being on the home screen
NICE
you're welcome
Thank you so much for the update guys 😬😬😬😬
Can’t wait to get home and get my iPad updated and jailbroken today is a good day 👌👌👌👌
i got a ipad pro 3rd gen. is there any jb support?
!t guide
Hey @idle sequoia, have a look at this!
only up to iOS 16.5.1
do i just hit restart
tvos 26.0
apple tv 4th gen hd
Since when are there jailbreaks for 18.7??
!t guide
Hey @buoyant mirage, have a look at this!
Since checkm8 exploit and iOS 18.7 released
Was just told this announcement today is only for ipad 7 🤣
What do I do if I’m on windows and get the term palera1n is not recognized
not use Windows
A complete iOS jailbreaking guide, from stock to jailbroken.
I don’t want too but I can’t find an adapter for a usba cable
So I can’t get dfu
I’m following that tutorial
Windows would make absolutely zero difference in that issue
then follow the palen1x guide
I did and got errors
Whatever. I have to go to town anyways I’ll pick up a new adaptor
what errors
In powershell it said the term palen1x was invalid
Bruh
You need to flash palen1x
Read
READ
guys can yall help me out with apple tv palera1n exploit
cuz i ran some issues with linux commands
sometimes the noti show that network 2 has disconnected and wtf is going on
and no i dont use ubuntu, i use fedora kde
wait a minute
im in wrong channel?
I did and sorry I was in town running errands
I put it on a usb turned off safeboot, it posted into windows
can palera1n handle 16.7.11 or 16.7.12 on an iphone x?
Yes
Palera1n is for ios 15 to ios 16.7.12
Dopamine doesent work for your version
Only palera1n works
thank you very much
Is crane already working on iOS 18.7 ?
Idk you should https://tryitands.ee
Probably but don't quote me
no it doesn't
palera1n isn't on Windows
A complete iOS jailbreaking guide, from stock to jailbroken.
use this
will sparkdev need to update snowboard for ios 18?
I made it work
how?
likely
i've heard issue with it
No way my tweaks disappeared after the update
Ventor or wtv it’s called was messed up
ventoy?
Yes
But for some reason I can get bootstrapper to download
is snowboard supported on ipados 18.5?
does sparkdev even work on snowboard? As otherwise we might need a new themer
yes
this version just now got official support with a jailbreak literally today, give him some time to update it
has anyone experienced issues using frida on 18.7? when dump/decrypting I ran into Unexpected error while probing the dyld of target process I have two identical ipad 7, one at 18.3 and the one at 18.7. former works without issues. And yes I saw there is an issue with creating fakefs and I did the workaround.
@timid plume needs help he cant use audiorecorder xs on a palera1n rootless jailbreak it just pops up with an error telling him this, i sound so stupid asking for otherpeople to help someone because i cant help
why ?
that’s not the issue
@tepid comet the battery for that device has failed
Can someone help me with bootstrapper
what's the issue
no
again and again questioning if iOS and iPadOS is the same 
I know
In plaera1n it says not bootstrapped and when I try to download zebra or sileo it fails when trying to install bootstrapper
@solemn verge
when did this start happening
how do i fix this thanks a lot
does my ipad need to be in DFU before i type the command?
this is the setup if it helps
Nvm i fixed it all good
is it saying that time out error bad? how long should it stay white for?
thank you sorry
after the ipad is switched on can i unplug it?
when it's on the homescreen yes
Can someone help with apple tv
yes, if you go to https://ellekit.space in your browser, does it load?
You have sent a link to a repo, you can use the buttons below to open it directly in your preferred package manager.
i got it to work with vpn but will it only work if i always have vpn on?
and also, elaborate
no
your isp is just shit
you don't need it on anymore
(or, you shouldn't)
il test some stuff and see if it works i think i may have added it wrong tho should it look like this?
i see my issue now i only added the source i didn’t actually download them
how can i downgrade apps because troll store isn’t supported with ios 18.7
try installing trollstore lite from havoc
run palera1n --force-revert -l, then try jailbreaking again
Hey guys, I installed cylinder. However, the tweak options doesn’t show up in settings? iPad 7 iOS 18.5. Thanks
Also would appreciate tweak recommendations
install [[cylinder reborn]] instead
Make your icons dance
My bad, got reborn, not cylinder
oh
you checked the right location for the tweak right?
cause on ios 18 i'm pretty sure it's different from where it normally is in settings
yeah it's in general now for some reason ^^
yeah there
it's due to some changes in settings that require it to be in there
(or, just easier for it to be in there)
Thanks for that
It was there. First time using jailbreak on iOS 18.
Hi, I jailbroken an iPad 7th gen, iOS 18.2.1, everything went perfectly but the Uber Driver app detects palear1n. What can I do? Thanks.
[[choicy]] and disable tweak injection
Advanced Tweak Configuration!
into the app
I did this, it doesn't work 🙁
did you completely turn it off
Hello,is this jailbreak working for the new ios?
My ip X 16.7.11 rootless JB, after 2 days, iPhone will restart and un-jailbreak, i have to connect to computer and jb again. Any solution for this?
do you use that windows version of palera1n
yeah no dont use that
Window and Mac still happen
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
If i jb rootless on Mac, it will not restart?
most likely if you update palera1n on your mac and completely revert palera1n on your phone
if you have an old version
Okay thank you. I will try
+t jbtypes
??
!t jbtypes
Hey @spring saffron, have a look at this!
Types of jailbreaks:
Tethered
The device must be booted using a computer every time, otherwise it won't boot at all. This type of jailbreak is uncommon. (e.g.: redsn0w, 4039)
Semi-tethered
The device must be jailbroken using a computer every time it's rebooted, otherwise it will boot in unjailbroken state. (e.g.: checkra1n, palera1n)
Semi-untethered
The device must be jailbroken using an app every time it's rebooted, otherwise it will boot in unjailbroken state. A computer is usually used for the initial installation, but it's not strictly necessary. (e.g.: unc0ver, Odyssey, Taurine, Dopamine)
Untethered
The device will stay jailbroken after a reboot, no additional action is required. This type of jailbreak is uncommon. (e.g.: Pangu9, Fugu14)
What is new
What lasts 2 days
Yes. I don’t know why
Do you restart it by yourself or you let it die
It’s randomly after 2 days restart then unjalbreak
Need number for ios meth
make sure you're using the latest palera1n version
if that doesn't resolve the issue, it's a tweak issue
what becomes after 2 days?
It says command not found
How do I put it in dfu and not have it instantly boot pongo
Someone have phone number for IOS method?
what are you talking about
what are you talking about
o mb
no
what the newest iphone that can be jailbroken with palerain?
F
Hey i got an iphone X i jailbreak it but it doesnt show the palera1n app loader or any other app i tried the shortcut method and it didnt work
iphone x
Is ios 18 jailbreakable now
unles you have an ipad 7 no
Aw
iPhone 8/8 plus/X
is it only 16.7.12 or 16.7.11 is also supported?
Both
And now, palera1n working with XR on iOS 18.4/18.3?
it never will
Type /canijailbreak
/canijailbreak device:iPhone 6 version:iOS 12.5.7
Only when checkm8 will be discovered for A12+
use chimera https://ios.cfw.guide/installing-chimera
Guide to installing Chimera
Does palera1n have on windows trying to jailbreak iPhone 8plus running iOS 16.7.12
A complete iOS jailbreaking guide, from stock to jailbroken.
is this rootful?
dont use rootful
why not?
!t whyrootless
Hey @idle relic, have a look at this!
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
-# This tag does not apply to iOS 14 or earlier
When I do palera1n -1 it shows this any idea? What do I press?
should be -l, not -1
What’s this error suppose to be?
any tweaks available on ios 18?
Wha to do if when I plug in my usb for palerain it wants me to reformat the usb
ignore it and just run the ventoy installer
it'll fix it
@warm wadi Is ventoy a download ?
just follow https://ios.cfw.guide/using-palen1x
A complete iOS jailbreaking guide, from stock to jailbroken.
What do you when get to the BIOS stuff ? Stuck on that step
it will vary based on computer, but find secure boot in there and disable it. then find the boot order and change it to USB first.
That just in computer settings somewhere ?
I found that and disabled it but I don’t see boot order
if you can't find boot order then just find the key where you can choose a boot device
How will I know if I do it right if I restart computer I open ventoy then hit the hot key? Hard to tell what key boots it
hitting the key to choose the boot device will allow you to boot from ventoy
I have it open but says “no iso or supported img files found “
that means you did not put the palen1x iso on the usb
go back into windows and put the palen1x iso file on the ventoy partition
There a link to file ?
yeshttps://github.com/palera1n/palen1x/releases/download/v1.2.1/palen1x-v1.2.1-x86_64.iso
it mentions this in the guide
I think I got lost when it wanted me to erase the usb cuz I thought I had it all on it
How do I put the files into ventoy
open your file explorer and drag the iso file you downloaded into the partition named ventoy
That all these ?
Idek I clicked the palen1x latest version link on the guide
if you cannot follow these simple instructions I respesctfully do not think you should be jailbreaking
no you didn't
because it does not take you there
read https://ios.cfw.guide/using-palen1x again
A complete iOS jailbreaking guide, from stock to jailbroken.
I’m on that clocked palen1x then the GitHub , files “you can also find all the files here” were I went to
I’m assuming went too far n suppose to copy the iso where says 64 bit
Why i was getting confused my usb wouldn’t pop up
Thank you it’s booting rn! I think there anything after booting kernel
I got it all except I’m stuck on “booting kernel”
it is normal
are you jailbroken?
Is not better to hit key for booting window? Else their primary OS will not even boot after turning on PC if I understand well
no ONE?
expirement and find out what works
what device
7 , just gets stuck on booting kernel then phone resets out of the screen with all the small words
Use dopamine
how do you know what ios they're on
Iphone 7 is ios 15
I am on iPhone 8 ios 16.7.11 when I try jailbreak with palera1n it doesnt work it restart it show palera1n screen but it disapear instantly and boot normally
yeah but where did they say iphone 7
oh
im SO blind man
why are you using palera1n then
what ios are you on
I suppose iOS 15
yeah i realize that now
because of iPhone 7
still good to ask
yes
#music #popmusic #jonniejupiter #jonnie #jupiter #rnb #youtube #channel #video
Produced by @Nova-808-h6f
Performed & Written by Jonnie Jupiter
What does this have to do with palera1n
is there any specific software to bypass locked to owner? Iphone 7+
Is this server filled of gate keepers who know how to jailbreak but won't help others?
no?
what is jail break gng 
breaking out of the jail apple put you in this thing called ios
oh.
uhh lowkey
whats bad abt ios, im kinda clueless
hard to sideload apps unlike android, no further customization
and other stuff
ohhh thank you!
Does this server offer jailbreaking services?
Hi all. having problems jb iphone X ios 16.7.12.Device boots un-jailbroken. flashes the palera1n screen and reboots. i have tried backup\restore\reset device. any advice?
Jailbreaking isnt paid
!t guide
Hey @wet abyss, have a look at this!
Update it
Update palena1
Using v1.2.1 downloaded this morning
have you previously set a passcode
iphone is factory reset
how did you factory reset by chance
yes
i have tried... backup. backup+restore, factory reset, factory reset+restore
so:
- by restore, you mean the restore option in iTunes/Finder
- by factory reset, you mean erase all content and settings
just making sure that that's correct (some people get confused about the terms)
you are correct in both instaces
ok, next question: what are you running (in terms of the exact command) to jailbreak your device
i use a usb with latest velocity as well as palera1x v1.2.1 boot normal option 1 which is palera1n -l
oh 64 version, 32 bit version does not run
what is velocity
sorry ventoy
can you try palera1n -l -s
got it working. never found out what was the issue. tried for about 5 hours all combinations
thanks for your help
that implies a tweak issue of some sort
Having a serial number retrival issue, any advice? (During install)
elaborate
it gives a usb serial bus serial number retrival error after it locates the device
is/was your device icloud bypassed by chance
i think yes
that's probably the issue then
like the device wouldn't let you set it up (locked to an apple id) and that screen was bypassed
no
it was open box so i dont think so
ok so it was bought from someone else
no amazon
oh

what cable are you using btw?
like usb a to lightning
or usb c to lightning
etc
oh ok
what ios are you on
26
no jailbreak
do i need to downgrade to 18?
ok
When I rejailbreak and enter the command, how come it only works when I don’t include the -l at the ending?
What is the -l for?
rootless
Are you able to jailbreak an iPhone 15 now
not even close
so does it matter that it doesn’t work like that?
so since i rejailbroke without adding the -l at the end what does it mean?
#music #popmusic #jonniejupiter #jonnie #jupiter #rnb #youtube #channel #video
Produced by @Nova-808-h6f
Performed & Written by Jonnie Jupiter
It isn’t an issue
Boot into recovery
It will guide from there
It happens to me
Mine isn’t bypassed
But yea
You got no support so doesn’t matter
wait since palerain works on ios 18.7.1 would it work on this? (didnt update yet)
??
its confirmed only for ipad 7
even if it would, there is no work on it
noted
thanks
Pretty sure ipad 7 has a special func from older gens that let's it jailbreak up to ios 18
Which is “being powered by the A10”
hi, I'm currently trying to jailbreak my iPhone X. it's stuck on pongoos. I've restarted my macbook, unplugged and replugged the phone three times, the usb-c to usb-a cable twice, recompiled, and it's still stuck. any suggestions?
what do you mean usb c to a cable
the iphone x has neither of those ports
do you mean the lighting port?
also, do you literally mean you compiled palera1n
usb-c bc it's an m4 macbook air, usb-a female port, usb-a male port, to thunderbolt to the iphone
yes
make
oh
it's worked before idk why pongos is still stuck
might be a space issue on the iPhone but I don't have really anything on there
use it for testing mobile apps and security research
currently trying to load an IPA on there for my job
but yeah, appreciate the questions but not sure where else to go from here
are you unplugging and replugging on Checkmate!
yes
or slightly after
but yeah it has the apple logo and the little chess piece logo
but it's displaying a pongoos> prompt and hanging
what ios is it on
I can use corellium but despite a likely multi-million dollar contract, they're not giving proper support
lemme check
it's some version of iOS 17
the iphone x never got ios 17
well how did I get it installed then, lemme check I could be wrong
because it's not ios 17
mm I can't find the version
yeah I trust you're right it's probably iOS 16, I did check the about screen but I could've sworn it said 17
but it's not a big deal
kk
didn't get an immediate output presumably bc of how it's stuck
but I'll let it run here for a bit
not super confident it'll work but maybe it'll come through
I can also check iTunes/Finder after and see if that has info on the iOS version installed
don't think so
it's fine
i know it's not supposed to apply to your device but when it gets stuck in pongoOS can you press control c and re run the command
your command is wrong
mm?
it's palera1n -l and then if you want verbose palera1n -l -v
ahhhh okay
I'll run that now
thanks for your patience I'm sure you get way stupider requests here
and I don't mean to denigrate anyone for that, this stuff is complicated
I just happened to have learned all about this with an iPod Touch in like 2012 haha
np, yeah there was a thread a long time ago of someone refusing to not use a insanely old version of palera1n then confused why stuff didn't work
back in the good ol untethered days
but yeah I teach a class on this stuff too, it's fun
I think it's very interesting
when I find a particular niche it's easy for me to obsess over it
yeah that's wild lol
not that hard to pull an updated version
but yeah, palera1n -l -v is still hanging
I'll let it run for a bit though
Can I jailbreak iphone 15 pro on ios 18.7
You can’t even jailbreak an XR on that version 😭
no
fugu18 untether
Ok guys
I read that one of the device could be jailbroken on 18.7 so i was forced to ask
Thank you
only the ipad 7
When do you think we can jb iPhone 15?
!t eta
Hey @lapis granite, have a look at this!
We have no way of knowing. When there is news, it will be in #announcements
Alright thank you
Is the command on the instructions for installing palera1n rootless
sudo /bin/sh -c "$(curl -fsSL https://static.palera.in/scripts/install.sh)" is for installing palera1n to the computr
palera1n -l actually installs it to the device
And the palera1n -l command is rootless right
Ok Ty. I just jb my iPhone 8 iOS 16.7.10 but can’t sign into Gmail someone said it’s because I’m not rootless
Fugu 26 untether thether semi free cydia magisk android sileo when
tomorrow
dm @quiet sedge the codename "pizza app" for beta access
what does that mean?
just use [[choicy]] to disable tweak injection to gmail
Advanced Tweak Configuration!
mine won’t run when i run the -l at the ending??
[[choicy]]
Hacky workaround to always load Choicy first
why is this?
elaborate
i’m using a specific palerain version 2.00 beta 8 i believe and when i ran the command to open it which was this
•/palera1n-macos-arm64 -1
it didn’t work, i had to run the command like this and it worked
•/palera1n-macos-arm64
because you are doing the wrong command
it is ./palera1n-macos-arm64 -l
with a lowercase L at the end
as in leonard
i did run it like this and it didn’t work. i had to run it without the -l at the end
you were helping me out last time. i have. a screenshot of that exact command i typed it like that in terminal and it didn’t work
Hey guys no new about jailbreak iphone 16 ios 18.1?
no jailbreak
i copy and paste it from here on my mac and it doesn’t work
Some fail find or nothing?
?
is palera1n installed at all
like
no ont he phone
did you try palera1n 2.2, then the pogo people told you to try 2.0 b8, and you tried b8 without uninstalling 2.2
yea i did that
!t rootfs uninstall then rejailbreak with 2.0 b8
To revert the jailbreak installation on your device, follow the steps below.
palera1n
Rootful: palera1n --force-revert -f
Rootless(default): palera1n --force-revert -l
If the above methods didn't work, see /tag rootfscli for more options.
Dopamine
Reboot, open Dopamine, open the Settings page, then press "Remove Jailbreak"
If you would like to further remove any remnants left after removing the jailbreak, you can install varClean15
Note: Since the rootfs is sealed on iOS 15+, it remains the same across all devices. Thus, "Restore rootfs" means practically the same thing as "Remove Jailbreak"
i uninstalled the 2.2 from my computer, rebooted my phone to get out of jb state then downloaded 2.0 b8 and jb after actully
so i did remove the 2.2
or did you mean i had to completely get rid of the 2.2 jb as in restarting my phone completely and jb freshly from the b8 version?
and also since i ran it without the -l at the ending and it worked whats does that mean??
before i do that what does it mean since i ran it like this?
idk
doesn't matter
just, run it with the -l always
is "ipogo" filtered here
i guess so
so you don’t know what the difference is since i ran it like that? cause i kinda don’t want to change anything unless i run into a problem which i haven’t yet
what does rootless mean
so the one i have rn would be considered not rootless correct?
no it is rootless
but you said this runs it rootless but i didn’t include the -l at the end?
you ran it with -l initially when you jailbroke presumably
i think just cause you were rejailnreaking without it it was working
oh okay so it thinks it running rootless since i had done it like that in the first place
so if i run this it will completely remove the jailbreak not like how when you reboot and you got to rejailbrek for everything to work again correct?
when you reboot the jailbreak is still there it just needs to be rejailbroken for it to come back
the command i sent will completely remove it
got it okay thanks, if i run into problems i will do this 👍🏻
also i used to jb my phones all the time back then and from what i remember you had to restore your phone complete like a new phone to get rid of the jb. now all you got to do is type a command and it will remove it without needing to erase your phone. jb has come a long way 🔥🔥
I’m looking for some help with downgrading palera1n I need 2.0.0 beta 8 and after I download it and run the command on terminal I still get the latest version of palera1n
let me guess, pogo?
Yes
ok, i can help you with that but I want to let you know that it does not make sense for it to make a difference and it's probably something on your end
I am unable to sign into pogo and they said to follow the pin for downgrade.
well, they are wrong, but, since they insist that it's correct, what os are you on
16.7.12
Ty I figured out how to downgrade and got it working
Hello! I just jailbroke my Apple TV running tvOS 15. When I launch the palera1n app, the option to install Sileo doesn’t appear. Anyone know what to do from here?
This is all I see
there isn’t a SileoTV
you have to get PurePKG
Click the reload button and see if it appears in the list
Nothing appears whatsoever.
Connected to the internet maybe?
It is connected yes
lol
I installed jailbreak rootless on my ipad 7, ipados 18.7.1. When I try to install Sileo or Zebra through the palara1n app, it takes forever and doesn't go past download stage. Any fixes?
Tried multiple wifi connections, only downloaded through iphone hotspot
what is the Apple TV do you have ? i have a 4K 1st Gen i don't have no USB Port in the back to connect it to the computer. can you please tell me how do you get yours connect to the computer
Mine is the HD. (4th gen)
I do not unfortunately. The HD is the only model I personally own
Thank you for your reply
hola
hola
hola
hola
Sup JB community, question. are there steps anywhere on how to downgrade the palera1n version? On palera1n's site, they have steps on how to do the jailbreak (which I was successful with), but I don't see steps to downgrade. Thanks in advance.
Let me guess, pogo
there are no steps to downgrade it because it is not expected or supported behavior
well, that's what I've said multiple times to multiple people already but the pogo people insist that the older version fixes the issues
idk why they have these requirements and then offload the support onto us
they say that they aren't a jailbreak support server
and like while it's true
don't send people here to get help with unsupported stuff
Yup! That’s it 😂
I get it.
I was just going where they said I could get help
Good to know
can you please tell them to stop sending people here to get assistance with outdated software
because palera1n is not the issue
Hahaha, 👍🏽
Don’t shoot the messenger 😂
yeah sorry if it came off like that 😂
welp, guess i'm late to the party. got sent over for the exact sme thing 😆
is there any chance can i jailbreak ios 18.3.1 iphone 11 without login icloud?
it can’t be jailbroken on that version
yea thx
Hello, how can I solve this problem? It detects my JB, I tried with Choicy but it didn't solve it 🙁 Thank you. ( iPad gen7, iOS 18.7.1)
what bank is it
It's not bank, it's uber d
uber d?
Uber driver, sorry
are you spoofing your location
im trying to jailbreak my ipad 6th gen on 17.7.10 but i keep getting that error does someone know a fix for it?
if anyones wondering its palera1n from ios.cfw.guide (sudo /bin/sh -c "$(curl -fsSL https://static.palera.in/scripts/install.sh)") and im using an laptop with an gts 1650 and a i5 9300 on arch linux
No, I did jb, I installed sileo without installing anything else and I get the error
why not just use your phone
for uber driver
I know I can use it without it, but I would prefer to use it with jb.
There is 0 reason to prefer a jb for Uber driver
Unless your doing fraud
you can't
just deal with it no jb
I've got iPad 7th with ios 18.7.1
When I try to decrypt ipa files, the main binary is still encrypted. Tried using TrollDecrypt.
Would like to try frida-ios-dump, but the script is unable to connect via ssh.
I may sound stupid and I apologize if this is not in the correct location to post, but I am having trouble with my jailbreak. I am using an iPhone x on ios 16.7.11 I have palera1n installed on a usb and when I boot into my usb through my bios everything runs accordingly to the provided steps on their webpage, but when the phone reboots there is nothing on the home screen in terms of a loader application to then install Sileo. Any assistance is appreciated as this is my first time using palera1n.
!t nosep
Hey @rain nacelle, have a look at this!
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
Just finished installing Palera1n onto my device, can I just restart my pc from here?
can i jailbreak my iph 13 ips 18.5 guys?
Yes
If you changed your boot order instead of using boot menu/manager you’ll need to remove the usb
Yep, doing it now appreciate your help 🤝
So, the problem I'm experiencing may not be only because of my AMD CPU... I'm trying to jailbreak an iPad Pro 10.5" from 2017 on 17.7.10, and I get the same error. I earlier just chalked it up to my AMD CPU, but maybe it's not just that. Anybody have any info on what could be causing this?
Some differences, however, include that I'm using Linux Mint instead of Arch, my CPU is AMD instead of Intel, and I did the manual download since the installer script just gave an error
No
is it possible to jailbreak palerian with windows ? i mean not linux or macos
Weird i fixed it by using palen1x or wtv the iso thingy is called
i tried palen1x on an ryzen 5800x and it didnt work but when i redid it with an i7 2600k worked immediately
!t palen1x
Hey @soft shuttle, have a look at this!
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
I would recommend linux still
If you can’t disable safe mode
Since ubantu still works
If you have a usb drive or blank dvd use palen1x
How to fix?
I'm trying to install sileo for the first time
<@&355177530061357057>
Sr for ping but I'm on a rush
Ipad 7 ios 18.7
Can you try a force revert from the command line, palera1n --force-revert <args u normally used>, and then go through the bootstrap + jailbreak process again?
Gm
I am having an issue
Sure
No u aren't
I am
Nope
Mods, this genius is refusing to help me
Correct
@vital apex please fix
my version is # palera1n: v2.2.1, i hope it's the right one
As long as it's the latest version it should be fine
so i do palera1n --force-revert -l ?
I may try that, then
it worked, tysm ❤️
Huh, that somehow worked for me, too. Though, it took some figuring out since I didn’t know Download Mode was just the boot screen (I was waiting for it to boot into its jailed normal mode like it usually did on Mint, but it wouldn’t boot so I tried the force revert and it said that it was in download mode)
I’m currently talking on a newly jailbroken iPad
niceee
niceee
niceee
✅️: Task started
Stats:
📥 Tokens processed: 1/874
🗃 Channels received: 10301
📩 Messages sent: 249
(translated from Russian - Dismiss)
??
Message logger
banned while i was typing out the moderator ping lol

No I meant the account
ohh
I’m pretty sure it’s to gain stats on a user
They should make a new raid phrase just being the green checkmark
For the first 1 level