#palera1n
1 messages · Page 70 of 1
When I connect the device to the Mac, my iPhone immediately goes into DFU mode
@vital apex
close palera1n and rerun the command
okay
what about dfu for me?
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
I think I'm doing everything right
I get “Booting PongoOS…” with my iPad being a black screen
after you reran palera1n?
Yeah
When I rerun palera1n, it says: <Verbose>: Starting thread for Apple TV 4K Advanced board
And then it gets stuck on Booting PongoOS
How do I log into DFU if when I connect to a Mac it immediately transfers me to recovery?
@vital apex
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
Now I get <Error> Unable to perform softboot
I'm facing a problem where I installed palera1n but when I enter it and install one of the stores they don't appear
Can someone help me?
Get ready (0)
Hold volume down + side button (2) - 【03/30/24 03:34:55] <Error>: libirecovery e
rror: -3 (Unable to connect to device)
- 【03/30/24 03:34:55] <Error>: Cannot exit recovery mode
Palera1n
Wait
Okay, good, you are using a cable that won't cause issues
are you using a computer with an AMD processor?
I don't know
Mac or PC?
My macos version catalina 10.15.7
I have heard sometimes macs can have issues with Palera1n
Also what phone do you have and what iOS version?
gotta make sure
Can someone help me?
you can help ?
iPhone x ios 16.7.7
Okay, good
I'm facing a problem where I installed palera1n but when I enter it and install one of the stores they don't appear
wait, you have an older mac, right?
Yes
Sorry. but you see I'm trying to help someone else right now?
Yes sorry
If you have an empty usb drive you can make a bootable version of Palera1n called Palen1x
On windows?
It says sileo isn't installed
No, it's its own OS https://github.com/palera1n/palen1x
Based on Linux and is made specifically for jailbreaking your phone
I have had better luck with it
Ok thanks
This is the problem when I try to install from the installation complete message, but it doesn't install
iPhone X
Do you have a passcode or face id set?
Not
hmm
I factory reset it before doing it
I know if a password is set the jailbreak won't work correctly
Possibly try removing the jailbreak and rejailbreak
Ok
It gives this message but the store doesn't appear
This is the installation log, I don't know if you can point out the error
What the hell?
rarely
just saying that since it's in your dock (I assume you use it often)
that's an old palera1n version it seems
oh
Does it indicate any?
what did you use to jb
Look here for info on what jailbreak bypasses to use https://hekatos.github.io/
A constantly-updated tables of bypass + app pairs
there's also Choicy
Ok thanks
I need jalbreak ios 17.3.1
That does not exist
only for arm64
what if u don’t have a usb or anything is there still a way to install palerain
Guys help
my device exits dfu mode on its own
after 6-7 seconds the device exits the DFU
It keeps fucking happening I buyt 10 usb flashdrives and all of them don’t work anymore
now the log is there
Is Palerein not dangerous?
It won't introduce a virus to the Mac in the terminal?
no
Don't put the ventoy setup on the usb drive as everything on the usb will be deleted when installed ventoy, including the setup files
wich is better rootless or the other one
rootless
is that palen1x?
Yea
what does it say before you get to that screen
do you have secure boot enabled
I’m using intel tbo
were do i download the iso from
palen1x-amd64.iso
A complete iOS modding guide, from stock to jailbroken.
get the ISO that corresponds to your hardware
use custom
are you using a USB-C to lightning cable
what device and iOS version are you using
do you have a passcode
Nope
I removed it
you have to reset your device if you have ever set a passcode
erase all content and settings
K
Floppy what would I do without ya
Floppa*
I wiped it and didn’t put a pass code
just enter DFU mode and press enter
Ok
if you’re having issues entering DFU, what cable are you using
I fixed it new issue
I’m gonna ignore the other thing you have and just ask why you’re queuing Legacy arm64e Support
you don’t need it
the answer hasn't changed since you asked a minute ago
It's like a toddler
Walk out of the room and suddenly all outcomes have changed
@pallid osprey MISTER ELECTRIC
Can't jailbreak that device
incompetence
Can you jailbreak iPhone 14?
Perchance
Why am I here again
It depends
It's fine they closed out of the loop of insanity
Nevermind it's back
Ask one more time and I’m banning you

If it's on iOS 17 you cannot jailbreak
if it's on 16.5 or older you can
You cannot downgrade it to 16.5
there are no jailbreaks for that version
Because 17.4 was allegedly bootlooping people so
Probably re-signed 17.3.1 in the mean time
Why rootful bro
That is also not a rootful error
Everything up to booting PongoOS is the same, rootful or rootless
ok, but what should I do with this error, how to remove it
When you run it does it say it's ignoring non arm64 device
?
What kind of palera1n do you have? rootless or rootful?
I used rootless
Ок thanks
I can download rootless but not rootful
Rootful requires commands
We don't recommend it
Im trying to jailbreak an Ipad 6th gen with ios 13.4.1 (that wants to update to 17.4.1) but I have no clue what im doing or if its even possible
you can jailbreak with Odyssey https://ios.cfw.guide/installing-odyssey
Guide to installing Odyssey
I am following the ios.cfw guide to delay OTA, since I am updating from a jb'able version to a jb'able version do I need to worry about restoring rootfs?
I don't think so?
well it depends. What are you going to and from?
14 to 15.8
^
I also plan to continue using palra1n
Palera1n doesn't work on iOS 14
You're likely using checkra1n/odysseyra1n/taurine/unc0ver
You have to restore rootfs and you will lose tweaks
A good chunk of iOS 14 tweaks don't natively work either unless you use rootful converters or rootful palera1n
oh yep im on checkra1n, thanks for the help
unplug and replug
Didn’t work
rejailbreak
what device are you trying to jailbreak
8 plus
when the phone turns on do you see PongoOS on the screen?
No
when it turns on, do ctrl+c to stop palera1n and rerun palera1n
So rejailbreak and when the phone turns on hit ctrl c
iOS version?
do you have passcode
Does palera1n support ios 16.5.1 arm64e now?
Hello my palera1n ipad 6 cant install tweaks using sileo, it says I don’t have permission to add file into sileofiles
Any way to fix
it never will
So only dopamine 2.0 supports it
yes
Paying anyone who can help me JailBreak my iphone 7 IOS 15.7.9
enter recovery mode manually
then follow palera1n instructions to enter dfu
Guide to installing palera1n
16.7.5
try and use usb-a cable instead of usb-c. i had trouble with getting the devices into dfu until i switched cable
I was told the issue was because I had not reset my phone after using a password
won't and never will since it doesn't support arm64e
Says here you can just use the Dopamine jailbreak https://ios.cfw.guide/get-started/iPhone-7.html
Find out what jailbreaks you can use on your iPhone 7.
what do you mean
Create fake fs
no
you need to reset all content and settings if you ever set a passcode on iOS 16 A11 device
afaik
yes
we do not suggest it at all, but if you must:
palera1n -fc to create fakefs
palera1n -Bf to create bindfs
palera1n -f to rejailbreak
palera1n --force-revert -f to remove
again, we usually will not provide support for rootful, some people might, but most won't
Can someone help me jailbreak iPhone please? I have know idea what I’m doing.
what device and iOS version
iphone 12 running ios 17.4.1
you can't jailbreak
dang really?
yes
brother we just told you no
palera1n only supports arm64 devices
is there a way that i can install cydia tweaks without jailbreaking then?
no
Hello, I have an iPhone 8plus, version 16.4. Can I download a jailbreak?
you can jailbreak using Dopamine, follow https://ios.cfw.guide/installing-dopamine
Guide to installing Dopamine using TrollStore
and no palera1n on phone
Is this the news look for palera1n
if i remove my pascode on my device then back it up and reset the phone can i then transfer it over from the backup and jailbreak or will it not work?
you can restore a backup after wiping yes
just cant set up with a passcode
dose it work on x ios 17.0
X didn’t get 17 so no
is the UI same as before ?
Not sure I don’t remember
I have a pride icon still
I like the pride icon though so I wouldn't mind them keeping it
The original X (And the only checkm8 compatible one) only goes to ios 16, so you have a xs or xr
it my friend phone asked to check he said x and 17.0 he must been drunk
<Error>: Unable to perform softboot: e0004051 (error code: -status_enter_softboot)
I don't think so? Unsure
Did you just install it
Yes
What did you use? Palen1x?
I had to and my phone restarted and I had to do it again
Palera1n
Or that one you said
I’ll have to check again
ok
I did it in a rush
Guys could I download palera1n for iPad Pro 2nd gen iOS 17.3.1?
and if so how would I do it?
Look here for info on how to install palera1n https://ios.cfw.guide/installing-palera1n/
Guide to installing palera1n
Alr ty
if i were to rejailbreak my phone but i didnt want to use rootless how would i do it
We can't help with rootful
how come?
Why rootless > rootful:
- There isn't any storage penalty (such as the 2-5 GB bindfs or 10GB+ fakefs storage penalty) compared to stock iOS
- Most future development of both tweaks and palera1n will primarily be rootless
- In general, rootful tends to have more and harder to troubleshoot issues in comparison to rootless
Yes, tweak compatibility for older tweaks may be better than rootless, but many older tweaks can be patched in various ways to work with a rootless setup.
also it's not real rootful on anything pass ios 14
so what is it?
it's just fancy rootless
rootless with extra steps
seems
and it takes up like 10GB of your storage
for FakeFS
but when trying to use repos a lot say its not intended for rootless for ones i want
how?
!t derootify
Derootifier is a tool that allows you to convert rootful (iphoneos-arm) debs to rootless (iphoneos-arm64). This is especially helpful for tweaks such as rootful themes or tweaks that don't touch the filesystem.
To obtain a rootful .deb, you can add a repository to PostBox by downloading the PostBox .ipa and adding a rootful repository. Once the repository is added and repositories are refreshed, search for the tweak and press 'Download .deb file'.
To use Derootifier, install the Derootifier .ipa WITH TROLLSTORE, open the .deb file downloaded from PostBox from the file picker, and press convert. If Filza (with a URL scheme) is installed, it will open Filza. If not, check /var/mobile/.Derootifier for the arm64 .deb. Share the .deb to your package manager and install.
Derootifier will not work without proper dependencies. The dependencies are as follows:
- file
- fakeroot
- odcctools
- ldid
These packages are all available through Procursus. If you cannot findldid, search with an L instead of an i.
If a repository gives an error about not being logged in, ensure you are logged in to the corresponding repositories login page. If the repository gives an error saying unsupported browser / package manager, you may need to spoof the user agent to be that of a package manager.
that looks
rather confusing for a person with such low iq as myself (the name is a lie)
Lemme simplify it
- Install Derootifier with TrollStore
- Download the rootful .deb you wish to convert
- Open Derootifier and convert the file
- Install the new rootless .deb through Sileo
were do i get the .deb from
Just know not all tweaks work with Derootifier
I get them here https://www.ios-repo-updates.com/
Please know you can't pirate through here
Not here for pirating dw
Sorry went to jailbreak phone (rootless)
I was looking at this video and it gave the iPhone 8 all the features of a newer phone like the bar and the swipe down though it looked cool so tried to get it
And then thag let me here
ah
did it work?
eventually i just switched the jailbreak i was doing cause it didnt
need help. iphone 8 ios 16.7 this is the message it does the download on the phone but does not install the paletra1n
did you erase all data and content
good morning. yes several times.
solved it. thanks
Is there any Jailbreak Bypass Tweak For Palera1n Rootful? (choicy,shadow) won’t work
switch to rootless
i am on rootless i am just asking
Okay I’m looking to the most up to date link for palera1n. I tried a few months back using it on an i8 running 16.7.3 and it would not go. I’m hoping I can reload on a stick and try again
Hello, I need help, I was trying to jailbreak. but when I try to enter dfu mode it restarts and doesn't let me continue the jailbreak. Is there a solution to factory reset the phone but I can't even get it to connect to dfu mode, even when I try manually it remains black.
iOS 16.7 iPhone x
are you using a usb a or usb c cable?
Cable c
need a 😔
damn cuthbert tags
usb c cables usually dont work with dfu mode because 🤷
What happens is that manual does not let me go black previously I was able to enter but if it froze on the apple then I was able to restart it but the dfu mode never came back manually and when I do it through the chekrain application at the time of the 2nd step the iPhone restarts
!t usbcmoment
Hey @sly patrol, have a look at this!
why the fuck is this the tag
!t chimeramoment
Chimera's success rate is poor and can take multiple attempts to successfully jailbreak, especially on older devices.
Chimera's success rate can be greatly improved on some devices by injecting the chimera_patch dylib. The easiest way to accomplish this is by downloading the compiled .dylib file from the GitHub repo, and injecting it into the Chimera .ipa with Sideloadly by expanding the "Advanced Options" window and enabling the "Inject dylibs/frameworks" option. Then, proceed like normal.
Please note that, while chimera_patch is open source, it does modify the .ipa and thus can be considered an unofficial patch. If you are not comfortable with doing this, you may follow the steps listed below.
Tips to increase success rate
- Update to the latest Chimera version (ideally 1.6.5 or later)
- Make sure the device is charged above 20%
- Reboot after a failed attempt
- Wait 60 seconds before jailbreaking after a reboot/failed attempt
- Turn low power mode off
- Put your device in front of an air conditioner or fan
Let’s talk about iOS 17.4 jailbreak and iCloud removal on modern iPhones( 11,12,13,14 &15)

U have any idear on how to remove iCloud on iPhone 13 iOS17.4 ?
@oak escarp U have any idear on how to remove iCloud on iPhone 13 iOS17.4 ?
!t icloudbypass
Hey @lyric drift, have a look at this!
Discussion of iCloud/Activation Lock/passcode/MDM (Mobile Device Management) bypass, asking how to do it, or posting about it is not allowed. No, it doesn't matter if the phone is yours or not. We will not help you with it. If you do own it, it’s recommended to use the links below.
If you forgot your Apple ID - Apple Support
If you forgot your Apple ID password - Apple Support
How to remove Activation Lock - Apple Support
If you forgot the passcode on your iPhone, or your iPhone is disabled - Apple Support
ok
so read it
Read what @oak escarp
.
it tells you everything you need to know
Okay
You don’t
Just don’t buy stolen tech
Hi, I’m using the Palera1n rootless JB. It works great. But every few days, it removes its self from my phone. Anyone know why?
You are on what iOS
Unc0ver has the same problem
Are there any guides on how to jailbreak
used to happen to me charger was issue for me
Ahhhh okay, it did tell me to re connect my phone, so maybe that it
I’ll try again with a different charger
it is likely crashing?
i'm not sure if the panic issue was fixed or not
No, the jailbreak just seems to disappear
yeah the device can crash and then it'll reboot
and it might look like nothing happened
Ahhhh, that’s possible, it’s a secondary device, so I don’t see it all the time
Is there any way to downgrade apps on 16.7.2?
no
Forget it
Didn’t know I could use trollstore
But
Is it still not possible to set up a password and Apple ID?
what?
you can use your Apple ID
I have an issue, so around every 20 days if I don't userspace reboot the system kernel panics and reboots
User space reboot? I thought if you reboot, it wipes the JB
Userspace reboot will reboot everything but the kernel
so it keeps your jb
Although it doesn't always work too well
device would crash and reboot and you would have to erase everything again to jailbreak
trollstore crashes when i click on settings and meowbrek2 app doesnt open and no icon shows for it
A10 iPad?
a8 ipad
hmm
ipad air 2
I know A10 iPads have issues if you don't do -e thid_should_crash=0
wait, what iOS?
15.8.2
If you have a computer you can always try regular palera1n
I know it isn't as nice
but it works
im on that now
Windows or MacOS/Linux
windows with ventroy
What brand of computer do you have (to find the boot menu key)
amd or intel?
oh yeha
amd
oh
ohhhh
nvm
also amd?
no its intel
but theres a bios pass that i dont know
ah
unplug and put back the cmos battery 
I mean, that works sometimes but also that resets bios settings
i mean
i never changed the bios
it would still detect a recently added ssd, right?
wait, is the temporary boot menu unlocked?
If it's dell spam F12 on startup
on lenovo it's like F2
Damn
Glad that you told me
I heard there was a tweak that allowed to set up password
still happening \
damn
i installed via my laptop and it still crashes
there is but it's a fake passcode that disappears when you reboot
Anyone going to be using palera1n for tvOS once its out?
Guys, I can’t open clash royal or like same apps like that when I have jail broken my phone, what should I install?
I might
You'll have to soder a USB breakout cable to your apple tv's motherboard
Never mind
Wait, but there's already a usb c port on my apple tv
you can use that
What Apple TV do you have?
Apple TV HD
Hello, can someone help me get Palra1n for iPadOS 17.2?
what iPad
9th gen
only 7th gen and 6th gen for base ipad
you can't
Is there a decent jailbreak for iOS 12.5.7?
Chimera
Guide to installing Chimera
It'll only support the Apple TV 4K 1st Gen
no?
palera1n for tvOS also supports the Apple TV HD
Yep saw that my bad
Apple Tv 4K users like me are fucked though because you have to physically soder a USB breakout cable (that's out of stock) onto the apple tv motherboard
or buy a cable
GoldenEye cable
Should've been more specific
I've never heard of those before. You have a link for one that actually works?
I don't know much about them
I just looked into them. apparently you need that and a thing called a Alex DCSD cable
I'd ask in #tvos-jailbreaks
I got this problem. Please help
I woke up this morning and sileo was no longer on my phone, any ideas on why this happened, I tried to rejailbreak the phone but it times out after going through the DFU, my phone then gets stuck in the booting screen
ignore this error
most likely it rebooted by itself cuz of palera1n bug, make sure you on beta 9 and if on rootless boot with safe mode flag
I’m using an iPhone 8 Plus on iOS 16.7.7, and I was using palera1x v1.1.4 is this not the right one to use anymore?
uh no that's correct
Is safe mode flag the same as having it disabled?
-s flag
?
Can palera1n handle ipad mini 17.4?

Ipad mini 6
Ok. If any of you guys have a good idea for this question, I’d appreciate it: #jailbreak message
If not, no worries
unsure
Alright, nm. Ty
palera1n -s like this
Guide to installing palera1n
it just says ios 15 or later but doesnt say which ios versions after 15 are supported and which are not
All Of Them
palera1n supports ios 15+
right now am on ios 16.4
as in, 15-15.8.2, 16-16.7.7, 17-17.4.1
i dont really need passcode but yeah
does jailbreaking erase everything ? all files?
nothing
no need to reset with dopamine
all files remain where they are ?
yes
oh really
yeah
here's the guide
https://ios.cfw.guide/installing-dopamine-sideloadly/
Guide to installing Dopamine using Sideloadly
is this okay ? lol
you can use optimalize storage or something like that to get rid of photos saved in device and let them only in iCloud
ok so i will have to make room on my phone and also it says that i need to turn on developer mode but it is not available on my device for some reason
On the iOS device, open Settings > Privacy & Security > Developer Mode. Enable the toggle. You will receive a prompt from iOS to restart your device.
developer mode is not available
did you already sideload
i havent started the process yet but i will look at its entirety tonight
oh if its xcode dont i need a mac ?
you need mac for xcode
Sideload first and you should be fine
damn i dont have access to a mac 😦
i just have intel and amd windows pc and ubuntu 20.04 and linux mint cinnamon
You don't need one I don't think
Just try sideloading first and see if it'll show up
isnt xcode available for windows too ?
I don't think so?
ok will try tonight im taking my mom to the doctor for now in half an hour
How can you search old messages? I posted a couple times on “how to get a link for up to date palera1n links but can’t find my message from the other day
Is palera1n an app or just command in terminal? First time here
!t guide
Hey @shadow gulch, have a look at this!
Palera1n for X 16.7.2 ?
yes
you have links in header of channel
Oh snap lol okay, I see that now. What a noob. Sorry and thank you
Guys i need trollsatral ios 17.3.1
unfortuanatley not possinle
you can make a bootable mac os on a usb
a what ?
that's what I was thinking
try [[Atria]]
is there like palera1n but like ipa format so i dont need a computer
because i have this app on my ipad called "palera1nLoader"
cannot exist, but your device may support dopamine
!jb dopamine
it does
im just wondering
because all my stuff is on it
and i want a rootfull jailbreak
but everytime i select rootfull in palen1x my ipad gets stuck in pongoOS boot screen
so its fake?
palera1n loader only functions if you are jailbroken
so then what is the point
it is used to install sileo or zebra as well as other jailbreak files
Have you created fake ads?
Fakefs*
When you select rootfull you also need to create fakefs once ur phone reboots then u redo it but without the fakefs
is there a tutorial
yes please
Alr wait go dms
bet

trust the device
stuck here for minutes
what do i have to do
perfect thx 
nvm its now on but palera1n is still missing
why are you not just using dopamine if you're on 15.x
im on 16
did you erase all data and content
yes
i will try it again the next day
possible to have to do it multiple times to get it done ?
16.7?
yes
I am also running 16.7. I did erase all content, was able to jailbreak then started the iPhone configuration but the device reboot upon setting up a new passcode?
exactly
you don't setup a passcode
because there are missing security features while using palera1n on A11 devices
that’s not the reason why you don’t set a passcode
it’s because there’s no SEP exploit
if SEP features are still present it’ll just panic the kernel
Just tell kernel don’t panic 
if kernel();
wants panic:
return no
unplug and replug your device whenever you see Checkmate!
Aight, do I have to reconnect the battery?
what
you can just hard reset the device
How to
what device
ifone 7
press volume up, volume down, and then the power button
Aight
Hmm, it still did it
what iOS version are you on?
15.8
what about unplugging and replugging when you see the error
Could it be an issue with my machine itself? I’ve tried using different ports
Intel
try another cable
USB-C cables have issues
I’ll try a different machine actually
oh
i think it's just vol down and power for the 7
it worked on my other laptop. thank you for the help tho ❤️
no problem
How do we install palera1n on iphone x?
you'll likely have to use an Intel machine
AMD CPUs have issues with checkm8
you can use palen1x if you don't have Linux/macOS
i'm on that website but it's telling me i'll have problems with ryzen
yep
some weird timing issue with AMD cpu's
ugh we need a blank USB too? How boring is all of this!
bought a USB...tried running Ventoy on it and it failed and now the USB won't show back up
format using Disk Management
Not sure what I am supposed to be doing
assigned a letter to it and it popped op, tried to open and it said i need to format it, tried to format it and it says windows was unable to complete the format
hm
try using Rufus to format
Rufus: Create bootable USB drives the easy way
select your device and then select non bootable for boot selection
managed to do it, tried to run Ventoy again and it crashed again at 12%
Anyone could help? Plz
ventoy can't be in the drive when you open it to install on it
what
I was putting the .exe file in the USB and opening it from the USB, it has to be saved externally to do the install
don’t place the exe on the USB
place it somewhere onto your computer and install Ventoy to your USB
then place palen1x on your USB
Do you have a passcode set on your phone?
On my laptop I do
that has nothing to do with this
what matters is if you have a passcode on your phone or had one on your phone before a factory reset
I do not
hmm
I had a pop up on the phone to trust the computer or not which I didn’t realise in time ?
well in that case, restart palen1x and trust the computer
How do I restart it
If you need more help, wait for a Genius on this discord to help since I need to go to sleep
just found my iphone x on ios 16.7 and id like to jailbreak. was told its only ava on palera1n! could someone help me out ❤️
The option to disable secure boot is greyed out and I can’t disable it
enable a supervisor/administrator password in your BIOS and then disable secure boot
do not forget the password you set
I have enabled the password but the option to disable is still greyed out
Tried to just skip the disable secure boot part and this is popping up
!t checkra1namd
Hey @wooden bough, have a look at this!
If you’re on AMD/Ryzen, you may be encountering a few issues when using checkra1n or palera1n. This can vary between freezes and straight up crashes. It’s because of AMD’s weird drivers that cause it not to work that well with checkra1n’s/palera1n's exploit. If you’re lucky you can actually successfully manage to jailbreak using checkra1n/palera1n.
Tips to increase successrate:
- Plug your device into your computer's motherboard.
- Use a genuine Apple USB-A to lighting cable.
If you’re stuck on the apple logo please force reboot yourself (see: /tag reboot).
If these don’t work, try to get your hands on another computer (preferably intel), and try to use checkra1n again.
Like I have an Intel cpu and board lying around 😂
Phone won’t get out of dfu mode now tho
How to install snowboard ?
sparkdev.me repo
Then inside you can install snowboard
Hold power off button?
got it pahaha. It didn’t work the first time i held it and i held it for like a minute as well. Just did it again and it worked
was panicking
Great
I installed palera1n with palen1x on my iPhone 8 Plus iOS 16.7.7 - is it rootless or rootful?
rootless
It states there exactly what is it installing, defautly it is rootless
Hi , iOS 16.7.7, iPhone 8. I got “crash process Kernel” when I tried to jailbreak with Palera1n. Is there any solution PLEASE?
Do you have disabled passcode?
how do you keep Palera1in after reboot the phone?
you can't (but don't worry all your tweaks and settings will be saved)
You can’t
Hello, I have an iPhone
Hello I have an iPhone X which restarts doing step 2 does not allow me to continue what should I do my model is iPhone X iOS 16.7.7
which is step 2?
the one with the volume down button
you are probably doing something wrong while entering dfu mode
not at all, in fact they told me that it could be elcabme and I changed it, I tried it with both types a and c
I have the cell phone in factory mode
Only once did the ajefres text piece appear but the jailbreak did not start. and from then on it restarts every time I try the second step
I was installing palerain on my iphone as I always do but now he dont turn on anymore someone now What to do?
likely crashed
!t reboot
This will force reboot the device. For normal rebooting instructions, see the normalreboot tag.
iPhone 8 or newer (including all notched devices, iPhone SE 2020 and newer):
- Press and release volume up
- Press and release volume down
- Press and hold the side button for 10-20 seconds until the Apple logo appears
iPhone 7:
- Press and hold the volume down and power buttons for 10-20 seconds until the Apple logo appears
iPhone 6S/SE 2016/iPad 8th or older:
- Press and hold the home and power buttons for 10-20 seconds until the Apple logo appears
folow this to force reboot it
Thanks👌🏻
SSLkill switch for rootless available ?
Guys I just jailbreaked my iPad iOS 17.4.1 and all my app store apps arr creashing
update your palera1n
I'm using latest palen1x edition
you sure?
Yes
Would this pc work as an Intel build to boot pale1nx? Want to make sure before I buy it
yes
you can boot palen1x on a literal hunk of scrap so long as it actually boots to bios
So this Chromebook I have charging won’t work? Even if I can get it to boot from a usb?
if you can get linux on it it'll work
So no ventoy from a usb? I’ll need Linux
mrchromebox.tech/firmware-util.sh:
ventoy works
I believe mrchromebox stuff would work?
like if you used RW_LEGACY firmware, it would probably work
Or do a full flashrom, allowing you to install any OS (excluding MacOS unless… you’re on GeminiLake.)
full flashrom means giving up ChromeOS though
not everyone wants to do that and that requires disabling write protection
Not that hard, usually it’s just disabling the battery and boot from power or using any conductive materials to jump pin.
Okay so that shitty school Intel pc I just bought worked first try. What is the app I can install so I can hit jailbreak instead of running the command from now on?
well what ios version are you on
So if I need to reboot I’ll have to plug it back up 💀
yes
How can I open sileo after a reboot from installing ellekit?
it doesnt actually reboot your device
Gotcha
how do i get on my windows
floppa can you help me when you have a chance
Hi All I've been trying to use palera1n for my iphone 13 ios 17.2 but it just stuck on recovery mode and show a warning in SSH saying :
<Warning>: Ignoring non-arm64 device...
is there antything I need to do?
you can't use palera1n

no

with what
palera1n on windows?
if that's what you're needing help on, you will need to make a bootable usb of palera1n called palen1x https://github.com/palera1n/palen1x, since there is no official windows version of palera1n
do i have to erase my iphone 8 if i want to jailbreak it with palera1n on ios 16.7.6 ?
ye
did you previously have a passcode set at any point?
yes
How to remove palera1n?
!t rootfs
To revert the jailbreak installation on your device, follow the steps below.
palera1n
Rootful: palera1n --force-revert -f
Rootless(default): palera1n --force-revert
If the above methods didn't work, see /tag rootfscli for more options.
Dopamine
Reboot, open Dopamine, open the Settings page, then press "Remove Jailbreak"
Note: Since the rootfs is sealed on iOS 15+, it remains the same across all devices. Thus, "Restore rootfs" means practically the same thing as "Remove Jailbreak"
then you need to erase your device
how to jailbreak iphone 8 ios 16.7?
can I use window to jailbreak for palera1n?
or must be use macOS?
!t palen1x
Hey @wise oak, have a look at this!
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Type palera1n
I’m here do I press ctrl + C now or hit enter and dfu
I’m at the second to last step!
I want to make sure I do it right
Your own password
Something like that.
Same command you use to boot palera1n if it reboot
What’s zebra?
Another package manager
Bad compatibility with Rootless
Guys can I download palera1n on a acer laptop?
!t palen1x
palen1x allows you to use palera1n-c on Windows computers via live-booting. You will need a USB flash drive or SD card for this.
Hey all I’m completely new to jail breaking and this will be my first time. I’m on a iPhone 8+ iOS 16.7.5 is there a potential video I can watch to help me or get assistance?
Do you have a Mac or windows?
Windows
A complete iOS modding guide, from stock to jailbroken.
note that if you’ve ever set a passcode, you’ll need to erase all content and settings
Okay thanks would there also happen to be a video of someone doing it?
Can someone send me a step by step guide to jailbreak using iOS 15.8.2 on iPhone 7
!t yt no
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The Apple Wiki.
honestly imo just follow https://ios.cfw.guide/installing-dopamine
Guide to installing Dopamine using TrollStore
Yeah
So the one you send I should do not palera1n bc yours opened too dopamine I just wanted to make sure I was doing this correctly lol
Palera1n have SEP issue (no Touch ID, password, Face ID, need computer to boot every time phone reboot.)
Sideload TrollInstallerX and use Dopamine. Your version is supported. None of the issues mentioned are found in Dopamine.
not in their case
but it’s still easier for them to just use Dopamine
They have A10, not A11
Ah, so does it only applied to A11+?
!t nosep
Hey @fiery fog, have a look at this!
When using checkra1n/palera1n on the iPhone 8/X running iOS 14 or later, you will not be able to use any of the following SEP features in a jailbroken state:
- Passcode
- Touch ID/Face ID
- Apple Pay
Additionally, if you’ve ever enabled a Passcode on iOS 16 on the iPhone 8/X, you’ll need to erase all content and settings in order to successfully jailbreak with palera1n.
Thanks for clarifying.
Only A11
How do I accept???
Did you install TrollInstallerX?
Yeah I think I downloaded the link provided in the tutorial of dopamine up above
You’re on 15.8.2, install TrollStore via TrollInstallerX not TrollHelper
Sideloadly from the computer?
Computer needed
Ok I got a computer
Sideload TrollInstallerX via Sideloadly onto your phone
So I just google trollinstallerx on comp?
On the computer?
Yeah
From sideloadly you do what?
Download the ipa, sideload the ipa onto your phone, profit
Omg my bad my bad I’m slow
when i try to jailbreak after a long time of not doing so this happens:
kevadesu@cirno-baustelle ~ % sudo palera1n
# == palera1n-c ==
#
# Made by: Nick Chan, Ploosh, Samara, Nebula, staturnz, kok3shidoll
#
# Thanks to: pythonplayer123, llsc12, Mineek, tihmstar, nikias
# (libimobiledevice), checkra1n team (Siguza, axi0mx, littlelailo
# et al.), Procursus Team (Hayden Seay, Cameron Katri, Keto et.al)
- [04/06/24 02:29:21] <Info>: Waiting for devices
- [04/06/24 02:29:21] <Info>: Entering recovery mode
- [04/06/24 02:29:21] <Error>: Could not connect to lockdownd: Invalid HostID
how do i solve this issue?
Is this correct?
fixed
What the hell is that?
The link to TIX is here:
Typed the link and can’t find it
Same
!t sideload
Windows:
Sideloadly
AltStore
*zsign + ideviceinstaller
macOS:
Sideloadly
AltStore
*zsign + ideviceinstaller (brew install libimobiledevice libirecovery)
Linux:
AltStore
*zsign + ideviceinstaller
Special:
***SignTools
On-device (requires jailbreak):
**AltStore + AltDaemon (iOS 12.2+)
ReProvision Reborn (iOS 9.0+)
*: Requires paid dev cert.
**: For iOS 13.3.1, you currently have to use an older version (see /tag altstorecrash).
***: For advanced users only. Setup may require a Mac in some instances.
Download it on computer, sideload the ipa to your device. There’s nothing hard about this.
OK how do I get it on the computer period if I can’t type it?🤷♂️
Go to discord on your computer?
Oh shit my bad I didn’t realize you can use discord on a computer I’ve been just using my phone 😭😂😂
I can’t get it to install on the computer even through discord clicking the link I click download and it doesn’t do anything when I’m in sideloadly trying to get it?
Can anyone help me with step 5 of installing ventoy?
I don’t see the palen1x iso file
are you using the https://ios.cfw.guide guide?
A complete iOS modding guide, from stock to jailbroken.
I assume you are so in that case
Download the palen1x.iso file
then move that .iso file you downloaded to the Ventoy drive you just made
Ah, you forgot to trust the computer on your phone
So now what do I do?
Should I try restarting shell?
Should I reboot and try again?
@solemn verge any help?
reboot into palen1x again
this time when you boot up, press trust computer on your phone
once it shows up
depends on your pc
probably you have 64 bit pc
I have
then download amd64 version
My iPad 5gen unlocked with palera1n, I installed carbridge, but it says it's not compatible? Because the site informs that it is compatible, can someone help me?
I need to buy usb and usb to lightning for boot usb right?
you need usb-a to lightning cable to connect your device and usb drive to boot from
because... your device doesnt support carplay
it only works on devices supporting carplay
if I have the usbA to lightning cable, I just only do below picture step right?
not need to do the yellow step
usb-a don't have DFU issues
How do I give terminal full disk access on windows?
My palera1n just keeps dissapearing from my phone and I need to do the jailbreak again. Anyone familiar with this and know a fix?
if the phone reboot you will need to jailbreak again if using palerain
don’t use this tool
use palen1x
how to install for this?
I have usb a to lightning
A complete iOS modding guide, from stock to jailbroken.
Thank you. Will try when I’m back home
sorry for bothering but we need a hardisk or smth like that, right?