#palera1n
1 messages · Page 19 of 1
and how do i do that
(unless you’ve made it through once already)
./palera1n.sh clean
and you just manually delete the blobs folder
yes
and if i don't?
do you recall any specific app i'll need to getting this ipsw?
Apple Configurator?
to use the ipsw?
jesus why does 0 brightness turn the screen off
nvm
same part where it crashed last time let's see
that totally wexpected
what
correct, the ones i've found give me an error
nvm.. i got it
pressing option on the update button and choosing the ipsw was easier haha
well ... there goes that opportunity.
i want to re-install the jb from semi tethered, how do i restore rootfs?
Idk
not to be rude but idk isn't helpful, plus no one directed a question twoards you in specific so yea kinda unnecessary
substitute is saying im using a jailbreak that is not fully functional pls help
still no idea how to fix this
Use sudo
stuck what happen?
still cant install palera1n 😦
because of this issue buildmanifest😬
palera1n now suppor iPad Pro A9X iOS 15.1 ???
Can i ask a question, is 15.6RC compatible for palera1n jailbreak?
yes but youll probably get amfi error
Problem is it keeps crashing during the install
crashing is not descriptive
dump logs
why does this error occur?
should i update to like 15.6 rc from 15.3.1
Can I use delay ota to update to 15.7 ?
yeah BUT
make sure to dump onboard blobs
so u can go back
until ios 15 is unsigned
unless ur device doesnt support ios 16
then go to latest version
what is that amfi error that keeps happening when you try to install?
another person earlier said to stay on 15.3.1, but i cannot get this to work for my life..
Iphone 6s (a9), keeps getting out of DFU after ramdisk on macbook pro.
ERROR: Unable to connect to device
[-] An error occurred
What are the options and why?
same
it's like 3 different issues that keep happening
cant erase volume
cant find imp4
and cant connect to device
or it wont stay in dfu long enough for the process
Thats tue only issue for me - cannot complete step 2. Phone gets out of DFU without touching anything.
Try tethered mode
It worked for iPhone 7, ios 15.7.1
But gave errors in semi mode
gonna try tethered next after updating to ventura
I am trying semi tethered - because I cannot have 6 years old iphone on tethered, which I want to use as carplay phone. Then it means I will have to drive around with laptop if iphone dies overnight 🙂
Iphone gets kicked out of DFU - after ramdisk requests to put phone back into DFU.
Tried allready like 20 times - it just drives me crazy.
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
[==================================================] 100.0%
ERROR: Unable to connect to device
[-] An error occurred
And phone reboots
Literally the same as him
I got this same message. And was told it’s because of the iOS version. Do not update to 15.6 RC. I had errors even when I backed up my iPhone. It restored me to 16.1.1
Im getting the same error also because my phone wont stay in dfu mode
anyone else gets the 256 error in pogo
You need to put it in recover mode first.
Put into recovery mode first. then do ./palera1n.sh dfuhelper
keep getting "[e] cannot write 'sshramdisk/iBSS.img4' " now
thanks! :D
im a little lost, did you put that cmd in before the palera1n tweak cmd?
is this a dev jailbreak?
Not really. More like advanced user jailbreak
also what does it mean if its a tethered jailbreak
The device can't boot into unjailbroken state, and to jailbreak it again you need a computer.
so do I wait for a jailbreak or this would be the only one
iPad 6th gen iPadOS 15.5 beat 4
Well, I'd bet this is going to be the only jailbreak for a while
april 2023
You can do it semi-tethered tho, so your iPad will be able to boot without a computer, but into unjailbroken state only. To rejailbreak you'll need a computer. One catch tho: you need to sacrifice 10gb of space on your iPad.
I got 128GB so i should be good
yeah like... there's not even a dev semi-untethered jailbreak for 15.5b4 currently. Fugu15 doesn't support it.
But ima wait for a friendly jailbreak to use. because ge0snow is working on one
if you're talking about Blizzard, yeah no, it's also going to be semi-tethered
Yea, did he quit working on it?
I want it to be semi tethered
The difference is, Blizzard is going to be rootless, afaik, so you won't need to sacrifice 10gb of space, but, you won't have most of the tweaks for a while as they'll have to be updated to rootless.
3 more exploits to be found
- a way to link them together
yea no
yes.
Yes. That's why it needs 10gb space, to create fake rootfs. Or write to the real one but tethered so it doesn't revert back on boot.
id use it but I dont have a mac or a linux pc.
Live booting Linux is incredibly easy of you have a 8gb USB
I need helps
live boot
What should i do
even 2 is enough
just get arch
whats that
kek
I dont wanna install linux tho
Who said that's going to install it lol. You'll just boot from the USB.
I wanna keep windows
maybe you don't understand, i called live boot
Live booting is exactly what you want.
you only boot into it from a usb drive
you do not touch your existing ssd or hdd
👍
yes sir
k
cuz I got this lego usb with ubuntu on it already
wait do I use rufus to put iso in or do it myself?
Rufus, yeah
but I didnt have a iso after, just folders
on USB? that's normal, it means it's installed
k
I still dont know if its a good idea to jailbreak because if it breaks..
my iPad is also a bit old
alr
Only check3m?
yes, only checkm8
😭😭😭😭😭😭
1 last thing sorry, how do I enter my boot sector?
you mean boot selection menu?
Yea
It's different. For me it's F12. It should say it while your PC is booting.
whats your motherboard?
like mines an asus
so if yours is an asus as well it should be the same keys
hold up ima just check
del or f12 usually are safe bets
sometimes f2 depending on board
my desktop uses f12 but my laptop is f2. both asus
well that method got me further than i was
i atleast got back to Tips crashing upon opening
and now i got tips to work, it's back to "failed to prepare bootstrap -1"
this is crzy..
for some reasons the support forums never get responded to, at least my post never was replied to
Because there's 183 of them y'know, and only a few devs that actually know what's happening
185 now
Devs aren't obligated to help you, so just be patient and, if you can, keep testing and adding details to your support thread.
i mean i've seen other people have my same issue but slightly different
and i can't even tell what's going on
Hey guys, So i go through the process and it says "Done!" and all that, but the device never boots... it just stays on a black screen in recvoery mode
any ideas?
are you holding the keys to enable dfu mode because that's how i get out of it
Put your phone in recovery first but yes cd palera1n so you’re in that folder. Then run the code to DFU your device. Then the code
what should i do after the step ./palera1in.sh --tweaks 15.7.1 --semi-tethered (It did boot ,everything seems fine)
You get info what to do on terminal
When you did everything good
And I think there is no --semi-tethered option
In command
It said to Makes a device with the supplied UDID enter recovery mode immediately.
This is what i got when i hit sudo ./palera1n.sh --tweaks 15.6
is this normal?
running ios 15.7, and it is still doing it :/
hello guys , my iphone gets out of dfu after 1 minute of entering dfu , what can i do because i cannot jailbreak it
when i try to do tethered notjhing happens after i type Yes, do as i say.
enter DFU mode from recovery mode
Reading work/kcache.patched2...
Compressing payload using LZSS...
IM4P outputted to: work/kcache.im4p
krnl
[] Custom kernelcache now exists!
[] Done! Rebooting your device
[*] Switching device into recovery mode...
ERROR: No device found!
ERROR: No UDID specified
Usage: ideviceenterrecovery [OPTIONS] UDID
Makes a device with the supplied UDID enter recovery mode immediately.
OPTIONS:
-d, --debug enable communication debugging
-h, --help prints usage information
-v, --version prints version information
Homepage: https://libimobiledevice.org
Bug Reports: https://github.com/libimobiledevice/libimobiledevice/issues
@strong ingot
it says done ,
guys how do i restore dfu my device without losing my ios 15.3.1 ?
I have succesfully jailbreaked my device but the tipps app is not showing the pogo install button can anyone help me (it's the normal tips app) I have linked the last command shown in the terminal.
iPhone 6s 15.7.1 MacOS Montery 12.5.1
Hm. Have you attempted again?
yeah still the same issue
same ^^^
my device isnt even booting after saying done
anyone know why my terminal crashes after "extracting: work/Pogo/Pogo/Payload/Pogo.app/PkgInfo", i asked in the palera1n discord but it appears no one could be bothered to help, the thread has been open for 12 hours too.
Does anyone has any good tutorial video for the jailbreak ?
why can't i delete it? i followed the tutorial.
i'd try and find one but with all the stupid scam videos it'd be impossible, just try and follow the guide as well as possible
Well ok, thanks
It sucks I’m still seeing you here with issues. I hope you get them figured out
how can I fix Error Installing Bootstrap -1. i already did a restart
Do i have to put my device into dfu mode before running ./palera1n.sh —tweaks 15.5 or will it do for me ?
you have do it
./palera1n.sh dfuhelper
Ok, thanks
I dont get it when i hold volume down and the side button it says that it doesnt found any devices
what device are you using
Iphone X
i get this outcome
or this one
everytime on X
not gonna mess with my pad until i can figure this out
right now i just tried tethered, and got the Tips not changing issue/ pogo not appearing.
that is the terminal
ipsw only works for a11-
I’m on iPhone X 14.6
!t removefakefs
Saved IM4M to blobs/iPhone10,6-15.6.shsh2
[*] Creating fakefs, this may take a while (up to 10 minutes)
newfs_apfs: unable to format volume inside /dev/disk0s1: File exists
does anyone have a fix for this?
Why though, tweaks seem to be working and no update for checkra1n
removefakefs doesnt work... it does the first step correctly, then reboots
Nah, I think 14.6 will be better for jb
could anyone help me
After running “sudo ./palera1n.sh --tweaks 15.2 --semi-tethered”, terminal says “Connected device is not in DFU mode, please rerun the script and try again”, even though it’s in dfu mode and connected to the pc. What should i do?
make sure you're not using a usb-c to lightning cable
Nope, not using this one
!t dfu
DFU (Device Firmware Upgrade) mode is a mode which allows a device in any condition to be restored to a fresh version of iOS (not to be confused with Recovery Mode). This can also be used to jailbreak using checkra1n and palera1n!
For how to restore in DFU mode, see /tag dfurestore
did this right
Anyone know how to get passed this? I tried using the search bar, but don’t see an answer to this issue
I believe so, there’s a laptop and a lightning cable displayed on my iPhone
Hey is the latest jailbreak can be use with Apple Pay on ipx?
no
😭
same problem
Hey, i got a question about pogo. I'm on 15.7.1 rn, and to my understanding Sileo is not supported for this version. Is there any other way to get tweaks working or should i downgrade to a lower version?
please help
Can someone help me ?
Hey Guys Any Video Tutorials On palera1n On A MacBook? I Mainly Find Linux Machines Tutorials & I’m Uneducated On That So Don’t Wanna Risk Putting It On My Gaming PC (Windows)
Why this?
!t removefakefs
15.5 works?
:yes
Way to install?
whats next? help
can someone guide me to installing palera1n with tweaks iphone 7 ios 15.7?
15.5 beta 4 works?
The GitHub has a guide
All 15.x versions are supported
k
With Cydia?
Sileo
whats better tethered or un tethered?
Basically Cydia but better
can install adb?
Semi-tethered is recommended if you have 10+ gb to spare
If you don’t then tethered is your next best option
I got 80gb to spare
Then you’re fine
Up to you
You have the option between tethered and semi tethered
Wait every time my iPad dies It cant even boot
If tethered yeah
If semi-tethered, it’ll boot but jb will be gone
As I said, semi tethered is recommended if you have 10+ gbs to spare
what jailbreak is semi-tethered that supports A10 on 15.5 beta 4?
Palera1n
how do I set it to semi tethered?
Yeah you can install tweaks on semi tethered
Guide to installing palera1n
Here’s a guide
then it’s working
tips app crashing
A11 15.7
werid\
Did you have it installed before using palera1n?
yes
You sure?
im getting waiting for connection from usb then terminating error repeatedly
Nvm
Could I do this with a ubuntu live boot?
the semi-tethered jailbreak keeps failing at this step for an iphone 6s+ running ios 15.7.1 any ideas whats causing this?
New connection for 2222->22, fd = 5
waiting for connection
Connecting to usbmuxd failed, terminating.
this keeps appearing and idk what to do
sudo systemctl usbmuxd
sudo systemctl usbmuxd -p -f
Nvm
u had it fixed in palera1n disc
I wanna jailbreak my 15.6 iPhone X. It's a main phone though. Will I be okay to do a semi-tethered JB?
How come? I'm new so I'm tryna see if it's worth it
very slight chance of something going wrong
otherwise you can try
i've been doing thises haven't fucked me up
What's the worst that could go wrong?
E.g. an iPhone 8 or something
Is That Bottom Line Correct?
how do we fix the Volume error again? the one due to ramdisk running twice.
@coarse vault did you fix it by chance?
Hi, when I’m trying to jb the only thing that’s happening is terminal saying “command ran” and then nothing. I’m on Mac OS high sierra trying to jb iPhone 8 plus(a11)
A11- devices can’t be bricked really
need to be big sur or higher
Oh really? That’s sucks, my hackintosh can’t run anything higher than high sierra
Thank anyway
it was a 5c
no you haven’t
now tips keeps crashing
how do i get past this besides a factory reset..?
Do I wait a bit longer because it doesnt have full root?
wdym
on the github it says some tweaks dont work
because it doesnt have root or smt
"Since we don't have a proper rootless tweak injector yet"
so yea Idk if I wait
thats only for the rootless fork
semi tethered has fakeroot and tethered has true root
the only reason why a tweak wouldn’t work there is because of other stuff unrelated to root
are you using python 3.11
wait do I do semi or no
tethered will
semi tethered will always be fake root or bind mounts
these two have no differences in tweak compatibility
semi tethered just takes up 10gb
fakeroot just creates another root volume and tweaks just get installed there basically
its better for convenience since you can reboot your phone and not need a pc to turn it on but if you don’t have 10gb free you cant do it
so i guess...nothin. alrite guys
Sudo ./palera1n etc etc etc
it's closet to 15gb from my experience
so do I jb or no?
No
I need help
device isnt booting
does this take time orrr
iphone 8, 15,1
the screen is glaring, but it's dark
like a half-way through boot
idk how to describe it
considering palera1n, but i need face id, so will wait.
hopefully, someone will port fugu15 to arm64 and it won't suffer the fate of fugu14
rip device is off\
did u end up restoring?
No i just restarted it
Restarted fine
No jb doe
and DL
u gotta rejailbreak buddy
semi tethered
can do a boot cycle without a PC
but needs a PC to rejailbreak
How did you get into dfu?
Wdym?
Like, I did
But the screen remains glaring but dark
Like it doesn’t boot up
Please help
I ran into this before
Just make sure u start clean
Restart pc, check the cable etc
Guide to installing palera1n
Check network too
Thanks
after semi tethered palera1n this happen
wait, so lockdown beta doesn't work either? 
how do i ssh into my phone?
anyone know why palera1n is stuck on
Found the USB handle. Stage: PATCH ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010
and it just keeps repeating itself?
I find that many people have this problem.
I think you did not enter dfu mode from recovery mode, but directly into dfu mode, that will cause the device to reboot into the system here
how do i fix this
cancan i jailbreak with this on iphone 12 ios 14.6
- palera1n doesn’t support the iphone 12
- palera1n is an ios 15 jailbreak, not 14
it tells me i have tips installed in the appstore and i see the icon on my hs but when i open it, it crashed instantly and palera1n can not actually detect it. i also can't delete it. any fix for this?
i also still see a tips bundle folder in filza so it's sort of still installed
so is there a way to restore the original tips app
Apparently only works on 15.1
device gets out constantly out of DFU mode.
I tried parelain dfu helper when in recovery mode. But it says to hold volume down and side button - is it true for iphone 6s, or should I treat volume down as "home button"?
However, it seems like I tried everything. Iphone just gets out of DFU mode.
I even wanted to try recovery from DFU just to start completely fresh - I could not even do recovery on macbook via normal DFU.
iphone 6s, 15.7.1
fits go into recovery mode then from there go into DFU mode. Try dat and lemme know
Hi, jsut to confirm. Recovery mode & connected. ds palerain, then use ./palera1n dfuhelper which says hold volume down and side button - but for iphone 6s should it be volume or home button?
home button
should i use the ./palera1n dfu helper - or it is just a timer
its just a timer
oh and I forgot, the problem is when the ramdisk writes and I need to re-enter DFU mode - then it will not stay in DFU mode (for the first time which takes around a minute it is all good)
so when terminal asks to enter dfu mode again for ramdisk - i go to recovery and from there to dfu correct?
i think youve got something wrong
its only 2 times that you need to boot into DFU mode, where one is right before you start anything and the two is after ramdisk
for two your iPhone will be already in recovery mode
follow a video from youtube
ok so after ramdisk phone boots up to screen
terminal says waiting for phone in dfu mode
from there I cannot go back to DFU
i mean i go back to DFU for a 30 seconds, process starts and phone lights up in normal mode
that shouldnt happen change your lightning cable.
tried already three different ones
change your PC
ipad pro 10.5 (iOS 15.7)
got the pogo app>pressed install>got link successful, have fun. Sileo and substitube dont appear on the homescreen, so i go into Pogo>Tools>Do All. After respring i still dont see sileo & substitute on homescreen.
But there is Substitute under iPad settings with all its settings options, like, enable tweak injection toggle, enable log file toggle etc.
there you go usb c cables dont work
need usb A cable
114.1668456007.4b8fd6c_iphoneos-arm.deb
inflating: work/Pogo/Pogo/Payload/Pogo.app/bootstrap.tar
inflating: work/Pogo/Pogo/Payload/Pogo.app/substitute.deb
inflating: work/Pogo/Pogo/Payload/Pogo.app/Info.plist
extracting: work/Pogo/Pogo/Payload/Pogo.app/PkgInfo
"disk4" ejected.
none
none
[] Booting ramdisk
[] Waiting for device in DFU mode
i got to this part in usb-c cable
I will change for the second part to usb-a cable
via dongle
PID: 0x8000
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100
aaaand it booted up
ERROR: Unable to connect to device
[-] An error occurred
so it works
but the device kicks the f out of DFU mode
after the ramdisk
till ramdisk everything is OK
tips app will crash
the error is after device boots up
yah was happening to e yesterday and tips app would crash
so are there any known solutions?
delete the palera1n folder that you pulled and restart both phone and mac and try again
ipad pro 10.5 (iOS 15.7)
got the pogo app>pressed install>got link successful, have fun. Sileo and substitube dont appear on the homescreen, so i go into Pogo>Tools>Do All. After respring i still dont see sileo & substitute on homescreen.
But there is Substitute under iPad settings with all its settings options, like, enable tweak injection toggle, enable log file toggle etc.
Please Help.
Any fix for this?
refreshing sources multiple times and adding a few... after some time i was able to upgrade those.
are you trying to say that it didnt boot up after jailbreak?
or is it that you had jailbreak and then lost battery and your phone shutdown and now its not booting up and going into recovery mode?
if you restart itll go into recovery mode then youllve to go DFU mode and jailbreak it again to boot
mind it that it wont boot without you running jailbreak.
patience
I stg idk what repo to add
poomsmart's
Google is ur best friend
free yt tweaks
fake
malicious repos can appear
poomsmart and alfhaily's repos are if u wanna mod yt
sileo tells u that its a malicious repo
ye
how did you solve it?
it takes some time dont be in a hurry leave it
by this do you mean that the devs are aware about it?
no
it happened to me too
thats why
need more details about what's happening and what u did
:RanOutOfPatience: did u fix it or did you just gave up?
are the chances high of my device breaking if I jailbreak it?
Linux or Mac?
if you fear that plz dont jailbreak.
Yes
kk
Guide to installing palera1n on Linux
delete palera1n folder
and dont forget to run the usbmuxd cmds beforehand
delete it from ur pc and pull it again from github
any fix for this my phone exits dfu and stuck on black screen after this error
use sudo ./palera1n.sh dfuhelper
I did same thing every time I’m trying to jailbreak
nvm, put your phone in recovery (NOT DFU), then run the command
did that too and error come out nothing change
I will try this but my cable fine because I did jailbreak with checkra1n on ios 12.4 so I don’t think it’s cable issue
15.7.1
did u put the ipsw link?
no I didn’t
so, advice
do this:
- sudo /palera1n.sh clean
- open palera1n.sh with text editor
get a link to ios 15.7.1 and put it in the ipsw="put the link inside here"
- save the file
- put the phone in recovery mode, use ./palera1n.sh dfuhelper
- run sudo ./palera1n.sh --tweaks 15.7.1 --semi-tethered
6.wait
hopefully it is clear enough
I wanna use tethered is it okay?
it should work the same
Hey there, quick question. is it possible to update from 14 to 15 with blobs?
yeah thank you so much I will try these steps and see
!t
where can i find the link of my version
iphone x 15.7
@floral gull
15.6.1 work?
You gotta be in the jailbroken state and I could be wrong but I think it does work on 15.x
Then don’t use it 
Hey, i installed palera1n on my iPhone X (15.7.1) and everything worked fine, but after couple of reboots (and re-jailbreakings) the Tips app disappeared and the "fake" tips app was on my Home Screen (the one without icon and the warning that it must be updated).
So.. What should i do now... everything works but i cant get in Tips to "Do all" and use the jailbreak.
Can I use a virtual machine with macOS to jailbreak on windows?
I did what you say and same issue not solved
**get_amfi_out_of_my_way_patch: Kernel-8020 inputted
get_amfi_out_of_my_way_patch: Found Internal Error: No cdhash found. str loc at 0x39a7cc
get_amfi_out_of_my_way_patch: Found Internal Error: No cdhash found. str ref at 0x12d2da4
get_amfi_out_of_my_way_patch: Patching AMFI at 0x12cf5e0
**
is this normal?
Yes
alright
Thanks to this step yaaay but im try later for the semi tethered
You can just boot Linux off a usb
How can i jailbreak My iPhone?
how to delete fakefs ?
I keep getting fakefs error
It didn’t work then
respring
or go to shortcuts app, create shortcut, open app, select sileo, run shortcut
Redo the jailbreak
I tried again, and re-jailbroken, but still no sileo appear
Are iPhone 7 Plus fingerprint will work after jailbreak?
why is the tips app required for palera1n
pogo app is installed over it
interesting. why reason why tips was chosen other than it is almost useless to anyone whos jailbreaking?
that's the only reason. you can easily switch to any other system app
anyone know how to fix 'error init failed'
after installing 3 working tweaks i install again then im stuck on respring logo or black screen
and other working tweaks on palera1n github not working and its going to black screen
No, you have to live boot linux (only if ur on windows)
does a old high sierra mac work too?
what version is it?
10.13 i think
its a 2011 mac pro 17"
the one with broken GPUs
the first version of high sierra
yeah
u got a usb with 5+ gb?
i know
kk
i might even have a arch laptop lying around
anyway ill try thanks for the support :)
Np
any voice changer tweaks?
are the chances over 1% of breaking my device if I jailbreak?
I mean a11 and under can’t really be “bricked”
So if you have a11 iPhone (or under) your fine
I got an iPad 6th gen
Ye ik
If something goes wrong you can restore
also if I jb with palera1n and it has an update how do I update it on my iPad?
If it’s a 15.x version I would recommend restoring rootfs and then updating or something
!t rootfs
To revert the jailbreak on your device, follow the steps below.
unc0ver
Reboot the device then open unc0ver. Tap the gear icon and enable the "Restore RootFS" toggle, then tap "Restore RootFS" at the main screen.
Chimera / Odyssey/ Taurine
Reboot, open Chimera/Odyssey/Taurine, toggle on "Restore RootFS", then tap "Jailbreak".
checkra1n / Odysseyra1n
Open the checkra1n app on your home screen and tap "Restore System". If the icon has disappeared or you get "Restore Error: General", reboot and re-jailbreak.
palera1n
Go to your palera1n folder and type ./palera1n.sh --restorerootfs, then do ./palera1n.sh clean.
If the above methods didn't work, see /tag rootfscli for more options.
/tag rootfscli
hey so i just finished instaling palera1n
and pogo gives me error -1 when i try to install
failed to prepare bootstrap
any solutions?
Plz
Yeah download pogo ipa with troll store
well
i tried installing palera1n semi-tethered again and it got stuck on the ramdisk screen
how screwed am i?
how do I live boot ubuntu?
What device are you using?
iphone x
palera1n doesnt support A12 yet
iphone x is a11?
Yes
yeah
mb
Ok then it shouldn’t be a big deal you can look up a tutorial or try to go into dfu mode or recovery
Nope it looks like this
but how do I enter my boot selection menu?
It doesn’t connect to my mac or windows machine either :/
It happend to me earlier
Wack
Any idea how to solve?
just wait for battery to die?
Did you run the command “sudo systemctl stop usbmuxd”
no
Hold on gimme a sec
tf?
do they work only on linux or macos as well?
It should work on both
ok, i'll give it a try
it doesn't work 
Which commands didnt work?
All of them
I hate rain
Have you ran the command “brew install libimobiledevice libirecovery” before?
Yes
Ok, it says its updating homebrew
https://m.youtube.com/watch?v=t7RljyyYQl8 you can watch this if you want
#palera1n #ios15jailbreak #checkm8 #palera1njailbreak #palera1nmacos
In this full guide I will show how to get Palera1n Jailbreak up and running on MacOS and jailbreak iOS 15 with tweaks. Palera1n jailbreak is completely free, and it is freely available from its official source also all the other software shown on video are completely free. All ...
The biggest problem is none of my pcs connect to the iphone x
sweet now my stuff wont wanna connect no more
Nvm, I’m an idiot, i got it working again
so uh
How do I live boot ubuntu?
whenever I try its stuck on this wallpaper loading screen
does palera1n use libhooker?
is it possible to use semi tethered but im on tethered now
If you restore rootfs and re jailbreak with the semi tethered option yeah
Make sure you have 10+ GBs to spare tho
i have a question if im on semi tethered what happen if i install a wrong or not compatible tweaks
because my tethered device i install a not compatible tweak then my device going black screen sometimes stuck at respring logo
this is horribly outdated
how do I live boot?
anyone know if appsync works on 15.6.1?
i dont believe so
but trollstore should work with palera1n
it'll act similar to appsync
anyone knows why the home button breaks on semi-tethered?
also any tweaks that let me ssh in without needing to go back into dfu
Yep
Home button broken in my iphone 8
anyone seen this issue or know the solution my iphone 7 + ios 15.7.1 after the error appears my phone stuck on grey screen
coprocessor doesnt like when ios is booted off another partition
since the home button is just a sensor and not actual hardware on A10+
any way for it to work in the future?
oh wow
i mean it's an amazing jailbreak
first ready for the "masses" too
i'm some shitter who first got into jailbreaking for not so good reasons and this wasn't that hard
probably not unless they use bind mounts
Done! The device should now boot to iOS If this is your first time jailbreaking, open Tips app and then press Install Otherwise, open Tips app and press Do All in the Tools section If you have any issues, please join the Discord server and ask for help: https://dsc.gg/palera1n Enjoy its not leaving dfu mode tho and i cant install irecovery as a dependancy changed names
im on xubuntu 22.04 with a iphone 7 on 15.7.1
what should i do?
After using the pc, will i be able to rejailbreak on device?
what iOS?
15.1
Help pls if u can
You could kinda workaround this by using the legacy branch of palera1n but it’s not really the best solution in the world and when this issue is fixed you’ll need to remove your jailbreak in order to switch back to maintained palera1n
Also keep in mind that the legacy branch of palera1n does not have tweak injection into App Store apps
Your only other option is to update to 15.7.1 and use current palera1n there (you won’t have the issue there)
Trollstore doesnt work on 15,7,1 afaik
that’s not really a great idea either because then you lose out on the CT bug, current potential of a semi-untether, etc. But eh, not many better options
It kinda can (if installed by the TrollStore Helper tweak) but they’ll only open while jailbroken
There was a point when the terminal asked me to do a dfu
And promoted me to it
I kinda messed it up
So phone restarted, tips app wouldn’t open
Redid the cmnd, tips app opened
But then this error showed
@solemn verge how can i clean it off, so that i start over?
semi-tethered or tethered?
Tethered
okay ill try again
@warped horizon hi you think you could add mention of the palera1n ldid -s stuff, pogo -1 <=15.3.1 issue, and iPhone 7(+)/8+) —semi-tethered palera1n home button issue in #common-issues by chance, thanks.
whats the ldid and pogo issue
well the ldid stuff is where some binaries/bundles (namely stuff on Procursus repo though a mirror exists which works around that, also Filza and whatever) need to be resigned using ldid -S - this is something I think you’re likely familiar with with current palera1n
the pogo stuff can be summarized with the attached image, only workarounds are:
- use legacy branch of palera1n (not recommended at all)
- update to 15.6 RC, 15.7.1, or use blobs to get to any version between 15.4-15.7.1
Is this working https://m.youtube.com/watch?v=GmC9vHCligI
#palera1n #ios15jailbreak #checkm8 #palera1njailbreak #palera1nlinux
This full guide will show how to setup Palera1n Jailbreak and get it up running on Linux and jailbreak iOS 15.7.1 with tweaks. This video also shows how to get Semi-Tethered mode with Palera1n Jailbreak. Palera1n jailbreak is completely free, and it is freely available from its...
i’m not really familiar with anything palera1n related, i don’t own a single device on ios 15
are there any other major issues?
!t youtube
WHAT WAS THE CMD AGAIN
!t yt
t! youtube
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The iPhone Wiki.
t! yt
doesnt work on replies i see
there’s the home button not working with the iPhone 7(+) and iPhone 8(+) when you use the —semi-tethered flag but that’s fairly basic
Waiting for pendrive iso palera1n for windows 😢
don’t follow this, follow https://ios.cfw.guide/installing-palera1n
Guide to installing palera1n
honestly if you have a USB just make a live usb of a Linux distribution (e.g. Ubuntu)
My laptop freeze when i use and window get corrupted after switch back to window like 000xxxxx error
Amd things

a pendrive iso will not fix the amd issue
Okay
i’ll add an issue sometime tomorrow so i can be at my pc
thank you for reminding me that I should probably add that notice
cause i’ll just make a message with everything and then link to it like the unc0ver bugs one
Can you help me if i have problems?
alright
How fix ?
Got this error anyone able to help me?
Me too
I saw some things being said about Linux just being shiit for this and throwing error after error so idk
I'll try installing it on HHD
Linux issues are generally solvable but you’ll have more issues with Linux yes
Sad I can't use macOS 10.13 or a VM of macOS
well a VM in general won’t work
It does requires some tinkering with VMware but I works
But idk about the jailbreak
Technically with full passthrough should work since macOS can't tell the difference
it won’t
Jailbreak or macOS on windows
?
Anyway I'll try other distro perhaps it's a driver problem with Ubuntu after all it wouldn't even play nice with my gpu
Ipad mini4 cellular ios 15.6 . Tweaks what wrong !!!
With ramdisk sshrd can connect ssh
But with palera1n is no possible to connect ssh
Hey if your still going through the same issue you would have to type in the command “sudo systemctl stop usbmuxd” on a new terminal the do “sudo usbmuxd -p -f”
what palera1n semi tethered can do?
im on semi tethered now then i turn off my phone then turn it on again then the tips and sileo keep crashing
so whats semi tethered can do?
semi tethered means u lose the jb when u reboot
When i try to add a source this pops up and the tips pogo app wasn’t working so I installed an ipa one and it didn’t come with substrate i think thats what’s causing it anyone can confirm?
so whats the point of being semi tethered
that u can go to normal mode
well before it wouldnt boot at all if u rebooted (tethered)
Is that you mean if im on tethered device and i reboot my device then jailbreak again the tweaks and sources is gone but the semi tethered is not. Like that?
if ur on tethered and you reboot ios wont boot
if ur on semi tethered ios will boot but without a jb state so you cant use jb apps
noo im on tethered earlier then i install the wrong tweaks then i reboot the device then im boot on ios
using a pc?
yes
my tiktok app keep crashing im on semi tethered same as capcut app how can i fix this issue? other apps is fine but this 2 have a problem openning
Wemm window iso progress start
did you do the usbmuxd thing
found this on the github=
Due to issues with Linux, you'll need to do extra steps in order to proceed.
First, open up a terminal, and run these commands:
sudo systemctl stop usbmuxd
sudo usbmuxd -f -p
Then, open a second terminal, and do the subsequent steps with the other terminal window.
Do I then have to jailbreak again via PC or only via my iPhone?
pc 😦
for iOS 15.6.1
thats probably long time away
Can I then update it again or do I have to jailbreak it again? So if I take semi-tetherised?
wdym with update? update to newer iOS?
you can update but you'd have to be compatible and rejailbreak to get the jailbroken state
No ios Update i Mean refreshen
Okay
That's what I meant by that
All good
should i have the jailbreak now or should i wait for further more compatibilities?
thats is something you have to determine yourself
look at the tweaks if you think its worth it
alrr, thank youuu :DDDD
you can see compatible tweaks on the github
@brazen root Thank you for your help
np @slate arch
👍🏼
I got a 2018? 9.7 iPad been on 14.8. But wifi always cutting out and glitchy. Is this stable to start using?
i dont know
i didn’t realize that palera1n needs an internet connection
so i’d have to majorly overhaul odysseyn1x
Try it if u dont care abt the ipad
💀
/canijailbreak
in #bot-commands
there a guide with
and idk if some youtube do video abt it
i can jailbreak tho
guys my 7+ is on 15.7.1, tried to jailbreak it, partially done but not completed, now no matter how i try to put it back to dfu it just restarts doesn't allow me to remove previously partially done or do a new jailbreak, any suggestions ?
also is it recommended to use semi on iPad 6th gen?
help me please palera1n iphone 7 15.5
can i use this on windows?
if yes then tell me how cuz i forgot all this jailbreak stuff on ios
is there a jailbreak for ios 15.5 where i can use windows. i have a iphone 7
No
ok
If you wanna jb live boot Linux or something
ok'
Yes
Ran palera1n but it didn't install sileo
Also install curl
what?
am I able to delete palera1n without losing my data if I decide to un-jailbreak
okay
Not sure but I think you don't lose data I don't see a reason why u would
how can i fix this
Question…. I’ve done libimobiledevice, libirecovery, palera1n are installed from terminal so when I started palera1n then it’s said command ran then nothing? My Mac Pro 2010 with 10.13.6? Is that affect with old software macOS?
macOS 10.13 is not supported
that’s what I thou @brazen root
Ye :(
Bugger! Which software OS support? @brazen root
It supports Linux like Ubuntu or like ventura or newer macOS
help
Idk about macos
Try using Ubuntu might be mint problem idk
okay
Alright thanks for help me out 👍 @brazen root
Np
@slate arch are you running on arm?
You should use preferably a intel or atleast x86 processor
what ist arm
intel x64
Okay that's good
Common issues with palera1n
Fixable:
Binaries/bundles must be resigned: this issue mainly affects packages from the Procursus repo or executables, use a mirror or use ldid -s (for example, ldid -s /Applications/Filza.app) to fix. Alternatively, you can install AutoSigner from nebula's repo to automate this process.
Linux usb issues: open two terminal windows. In the first window, run sudo systemctl stop usbmuxd and then sudo usbmuxd -f -p and leave this window open. In the second window, run the palera1n commands.
No passcode on A10(X) devices: With the release of palera1n-c, A10(X) devices can now natively support a passcode. To migrate to palera1n-c, follow the guide here https://docs.palera.in/usage/migration-from-palera1n.sh.
Host OS is a Windows-based machine: palera1n does not support Windows natively and requires macOS or Linux. However, Windows users may use the palen1x ISO in order to live boot a minimal Linux installation for an easy jailbreaking process by following the guide here https://docs.palera.in/palen1x/flashing-palen1x.
Not fixable (as of 13/2/23)
palera1n not working on AMD computers: as with all other checkm8 based tools, issues may arise with certain AMD devices. If palera1n does not work for you, you will need to use an Intel based computer or a Mac.
No passcode on A11 devices: due to SEP mitigations, a passcode cannot be set while jailbroken on A11 devices. This problem is present on A10(X) as well, but is fixable with palera1n-c as it utilizes the blackbird SEP exploit. On A11, there is no SEP exploit public, so there is no foreseeable fix. Additionally, on iOS 16, a passcode can never have been set at any point on A11, meaning you must restore the device if one has ever been set (you may backup your data).
Unable to enter DFU (device reboots): make sure you are not using a USB type-C cable when attempting to enter DFU. These cables are unable to put iDevices in DFU mode, so you must use an adapter or a USB type-A cable.
iMessage/App Store issues: due to a bug with Substitute, you may encounter issues when attempting to use iMessage or the App Store on iOS 16. If this occurs, you will only be able to use these services when not jailbroken. Open the Substitute app and disable tweaks to temporarily fix the problem.
palera1n app not appearing: sometimes, when jailbreaking for the first time (most notably on 16.2), the palera1n loader app will not appear. This is due to a bug where the device will panic and reboot, preventing the loader app from appearing. There is no concrete fix at this time, but some users have reported that creating a shortcut to the loader app using the Shortcuts app will allow you to open the loader app.
@solemn verge good?
@strong ingot
not working on amd devices? BRUH
ffs
**[*] Downloading BuildManifest
Version: 9bfdde2b2456181045f74631683fba491d8bf4f2 - 38
libfragmentzip version: 0.64-aaf6fae83a0aa6f7aae1c94721857076d04a14e8-RELEASE
init pzb:
Error init failed
**
iphone x 15.7.1 a11
blame amd for having bad drivers 
I have a 7 to 8 year old laptop
In my opinion I wouldn’t use amd
But that’s the only pc I have
Amd bad
[*] Getting device info...
[*] Creating ramdisk
rm: work/IM4M: Permission denied
rm: work: Permission denied
[-] An error occurred
rm: work/IM4M: Permission denied
rm: work: Permission denied

use sudo
[*] Getting device info...
[*] Creating ramdisk
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8010
Found the USB handle.
Now you can boot untrusted images.
img4tool version: 0.197-aca6cf005c94caf135023263cbb5c61a0081804f
Compiled with plist: YES
Saved IM4M to work/IM4M
Version: 9bfdde2b2456181045f74631683fba491d8bf4f2 - 38
libfragmentzip version: 0.64-aaf6fae83a0aa6f7aae1c94721857076d04a14e8-RELEASE
init pzb: null
Error init failed
[-] An error occurred
already done that...
idk then am bad at linux
Just want to add that a Asus M515DA (ryzen 3 laptop) works for Palera1n on xubuntu with an iPhone 7 on tethered mode
It’s just not very consistent
After palera1n device go to recovery mode !!! Is correct or have problem ??
Exit recovery mode with an 3rd party app, futurerestore --exit-recovery or irecovery -n (I recommend 3rd party app)
what program should i use to jailbread A9 ios 15.2 on Windows computer? because Palera1n doesn't work with windows
Dual-boot linux. There's not any program for jailbreak on windows
how do i do that?
There's a lot of tutorials on YouTube. You'll need an USB stick
okay ill have a look . thx very much
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Apple Database and The iPhone Wiki.
It's just for dual-booting linux. I know that youtube has a lot fake things for jb, stuff for windows...
download a linux iso from their website (ubuntu isn't a bad choice), and put it onto a flash drive using something like rufus