#futurerestore-help
1 messages · Page 243 of 1
oh yeah, you gotta use icloud backup to "slow" restore your data back in
wym
@rocky kraken
You can't use an iOS backup that was made on a version higher than the one you want to go to.
@autumn moss are u experienced with futurerestore 
NO 
oki 
@stiff sparrow
FS out of my league as well. For me what happens is during FS process, iTunes eventually opens asking me to update or restore, I close the popup box and go back to FS and get the message "Device did not disconnect. Possibly invalid iBEC. Reset device and try again". Any idea what I can try?
Why does this channel always consist of people doing the exact opposite of what we tell them or do what we tell them not to do? I’ve seen many people breaking their devices recently
Hey all, looking for help with FutureRestore. Trying to upgrade from 13.4 => 14.3. I followed this guide https://www.reddit.com/r/jailbreak/comments/o3zp64/tutorial_the_guide_to_actually_end_all_other/ but it's hung saying ERROR: Failed to place device in recovery mode. I checked common errors in said guide which are not applicable and also checked against the following link and nothing listed here is applicable to me either https://gist.github.com/TheRealKeto/871116a9fc6cc46393b818816a876da0
Documentation of most common errors you can encounter when using Futurerestore. - FuturerestoreErrorCodes.md
Oh also this is for an iPhone 8 plus, running FutureRestore on macOS Mojave
Tried placing it recovery mode myself and no dice, should I just keep retrying?
is that a macos version with itunes
Yes
open itunes, click the device, and click trust
I think I've done that already, I created a local backup just prior to this
When I click on the phone icon in itunes it shows me this
Alright, I got it. FutureRestore ended up hanging after a bit of waiting. Had to force quit FutureRestore and run it again.
Cringe
Cring
Crin
Cri
Cr
C
C
Cr
Cri
Cring
Cringe
Hi. I’m on iPhone 12 with iOS 15.0.2. Is it possible for me to “update” to 15.1? I’m getting software update available with 15.2.1 on my phone.
nope
Future restore says ipwndfu is enabled does that mean i got ipwndfu working?
Hello y’all I’m trying to upgrade my iPhone 8 to iOS 14.8 from 14.7.1 with futurerestore GUI and I have my iOS 14.8 blobs saved but when it starts restoring it says failed to extract firmware from ipsw is there a way to fix this issue?
hi Guys recently I downgraded both my 6s from 15.2 to 14.2 with blobs using nyuszika7h downgrade tool . Unfortunately now on both iphones I cannot activate facetime and imessage with my phone number.... Does anyone have any ideas.??? I m desperate
i have an iphone xr with ios 15.2.1, do i have any chance to go back to ios 14.8 ??
Tried FR GUI got as far as connecting to FDR client and after a few attempts it reported failed and came back to the recovery screen. I click Exit Recovery and it just opens iTunes on my Mac asking me to Cancel, Update or Restore. I cancel but still have the recovery screen on the iPhone. Suggestions please?
You are still trying to restore that se
Thats like
Really sad
Can I install iOS 14.8 with blobs on iPhone X and have faceid working? Is the SEP compatible?
You are able to delayota
I just tried to do that but looks like i bricked my device while using checkrain, it won't go out of the dfu mode and checkm8 fails for no reason, it worked just 20 mins prior
Did you try force restarting?
it boots to dfu mode, won't start normally
the only thing i have done was installing supervisedenabler in cydia and it bricked wtf
I am just as shocked as you are
You are either fucking up in some eay
Eay
Way
Do
Up down hold power for 20 seconds
also after installing the delay profile the OTA updater still shows iOS 15.2.1
Ye sorry I just wanted to check up is there anyway to update to iOS 14.8 because it says failed to extract firmware from ipsw and I have the blobs too but take your time to help me no rush
Follow the guide in the pins
Its not though…..
@celest basalt
Not sad at all... I successfully FS'd and am now on 14.3 👍 ... never give up!
First used the latest beta... kept getting "Device did not disconnect. Possibly invalid iBEC. Reset device and try again"
Then switched to the non-beta version where I kept getting "FDR waiting for message" error
Then switched back to the beta version and it eventually went through. All other steps the same.
You probably used the inferius beta….
L
Rip ios 10
Shoulda kept it there
@celest basalt
beta = futurerestore-x86_64-v2.0.0-test
nonbeta = 1.94
10 was a good OS, but dwindling app support
What is the commit sha on the 2.0.0 one
Just run it
And send it her
E
Run it and it should say commit sha
Send it here
Sorry, I don't follow... send what? I completed the upgrade already
Run the futurerestore binary once
Without args
The beta one
And it should output the help screen
On the bottom somwhere
It should say
Commit sha
Send that here
oh... I finished and quit the screen already
Is the binary in front of your face
The futurerestore beta one
Open up a terminal
Drag it in there
Press enter
And copy the sha of it
And send here
That simple
you mean this?
0.88+git20211025.1e855d7-1e855d70c84419014e363bdbcaead7b145fe3e1f-RELEASE
Do I have to have a jailbreak or be jailbroken to use future restore
depends on your device
iPhone se 2nd gen
yeah u were using the wrong build
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
thats why it wasnt working
that wasn't meant for normal restores
yes, you have to be jailbroken because you have to set a nonce
Before I started I asked which build... even uploaded a screenshot and was told it was the correct one
well, you were using 268, when it was supposed to be 264
I knew the build was important which is why I tried to find out ahead of time... anyway it completed
Hi
do you have blobs
If you have, ipwndfu restore
Yes
https://gist.github.com/nyuszika7h/aac55c97f7925cddcf5ec3167f85dfe8
How to Future Restore
from iOS 15 to 14 on checkm8 devices.
downgrading
yes, but what do I have to expect?
Just run it?
Oh I get it it's for Entering pwned DFU
Btw restoring deletes my data?
yes
nice already made a backup
Thanks for you help!
hope your backup works, have heard that ios doesnt really let you restore an ios 15 backup to a 14 device
thanks, it could break my device?
it’ll just want to update the device
hope it works
I keep getting this error: Device did not reconnect. Possibly invalid IBSS. Reset Device and try again. I am trying to set the nonce with pwndfu and yes it is in pwndfu and i did run the sigchecks its a ipad 7th gen.(i do have mdm dont think thats it tho.)
I am on bèta 2.0.0 btw
@wanton kite
I futurerestored to 14.3 yesterday after getting the same error you have now and using the same beta. I got it to work in the end by doing this.
#futurerestore-help message
@wanton kite
Later I was told the problem was the wrong beta build
#futurerestore-help message
After the fact I was told I would have had a smoother update if I used beta 264 (apparently I used 268 which is what the GUI serves up). I do not know where/how you get the beta 264 version.
Can you use futurerestore without your device being jailbroken? I'm trying to jailbreak my iPhone 11 to install a location spoofer
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
Guys, after starting futurerestorer with sudo, it says i should press Trust on my device but I already did multiple times
and furthermore I am in recovery mode now and it still doesnt work
Does anyone know how to fix it
[7] Make sure to hit "trust" on your device if prompted! still doesnt go awaz...
Even if it is trusted..
It was meant for tethered downgrading
The build u were using
And it was being mixed up
This is so stupid. I tried so many things. Without sudo it cant detect recovery mode. With sudo it cant restore. whats that man
Try using cli
Instead of gui
I think I will never understand this program.
i do not really know what you mean with CLI, but..
After rebooting the liveboot, I do not get the default error I posted above, I get this now: "isPwnDfu enabled, but device was found in normal mode"
If I do this in recovery mode, then I get another error that [...] but the device is in recovery mode
I already executed these 2 python files but it cant detect my dfu device..
obviously it can't be in normal mode or recovery
pwndfu mode the device has to be in pwned dfu
not normal or recovery lol
But somehow it can't enter it
because pwndfu requires checkm8 and patching SecureROM
its in the guide
entering pwndfu is unrelated to futurerestore
its a separate process
not my fault or problem
I have a hackintosh with pci card
so its 100% successrate
Makes sense, but.. then I get this:
Executed as root and yeah.. as a default user and the device IS in recovery mode.
I already tried it before
bro
Its pwndfu
why would you have it in recovery
instead of dfu
checkm8 is a dfu exploit
before you embarrass yourself actually bother to read the guide this time
https://gist.github.com/nyuszika7h/aac55c97f7925cddcf5ec3167f85dfe8#a10x I was using this guide and I did everything from up to down.
I even watched a video that has been uploaded yesterday for A10 downgrade. The main problem is now, on his video, they python script works, his device can be detected, but mine cannot. That's the only obstacle for me now.
Isn't my device on DFU mode if I have the macbook picture with the lightning cable and with support.apple.com/iphone/restore?
I guess I understand now there are differences between DFU and recovery, yeah just saw it. Difference is that I need to remove power button
Ugh
dfu is black screen and shows up
the cpu of your pc
Amd Ryzen 5 5600x
so x86-64
@valid adder lol
He asked me for my computers cpu, so..
@celest basalt that wont work, i would get a pci usb card
I have an i5 and it isn't working either
Seriously? Because of AMD it won't work?
apple moment I guess
Yeah
Their usb stack is dogshit
@celest basalt D;
Keep trying
It is normal that my device turns on after failing?
A10
Yeah id keep trying
7 Plus
A10 is iffy
I'll try
@celest basalt get this for your pc
I won't just buy this just for downgrading. I guess I just let it then..
Wanted to have JB device, but if thats soo complicated, then I will just use my 11 pro
What a timewaste.. They should write that it doesnt work for AMD processors.
Were u following the fr guide
Nys should add that
also they should add sudo python2 ipwndfu -p
@celest basalt you should add a note abt this
also do add sudo python2 ipwndfu -p
Does it work for you now? After putting your device in DFU mode (not recovery) on your computer?
Not yet
I have a intel computer too, if its working for you, I'll take it and install linux
I'll stay you informed if it works
alr thx
My device is in DFU
you need a mac and fugu
Why
this is why
god isn't real
I have to blame someone
@celest basalt It doesn't work on linux:(
we've known this entire time
ipwndfu for a10 is fake
this guy lied to me
Hey @hushed chasm, have a look at this!
YouTube is typically a very poor source of information and should be avoided. Many jailbreak YouTubers promote piracy, outdated tweaks, or just flat out fake jailbreaks. Reliable sources: iOS Guide, r/jailbreak Wiki, Complete Jailbreak Chart and The iPhone Wiki.
@hushed chasm if he lied to you don't fucking post it lmao
People will know it's fake
@hushed chasm no they won't read this message please
Maybe I'll make a Hackintosh later
what cpu
yeh that should have no issues with checkm8
He is right tho
just because I don't believe doesn't mean I don't respect the morals or most religions
I am agnostic
the problem I have tho is sexism in most religions clothing shit etc
Every religion be like
Hi, I'm on an iPhone 13 Pro Max, iOS 15.0.2. Can someone help me understand the downgrade/upgrade process in case I have SHSH blobs saved? I have iOS 15.2 blobs saved using blobsaver, can I upgrade to it in the future without any issues like Face ID not working etc? Also, what's the deal with SEP, and its compatibility with different iOS versions?
I'm just talking about like 1-2 months down the line, in case a JB comes out
now I'm exiting dfu mode disappointed
also enforcing skirts at private religion based schools and having boys shave
It's like assuming your ignorance on God's existence
Okay, but what if I want to downgrade from a future version of iOS? I don't have blobs saved for 15.0.2, that's why I was asking about 15.2
I don't really think I have the knowledge to affirm the existence but I can't confirm it neither
Me at 10 years old
That's dumb
god damn I'll have to wipe my disk
I know, I'm asking about the process, that's all
for MacOS
it will once theres a way to set nonce
You need a jailbreak and an exploit for blobs to be used
blobs are validated via a nonce(number-useonce) which the device generates. Since its random it will never match the blob's nonce.
With a jailbreak or exploit we can set the nonce so it matches the blob then its not random anymore.
Without a jailbreak you can use blobs saved if you freeze nonce, save blobs with the frozen nonce. As long as nonce doesn't freeze as a new value you can use the saved frozen nonce blobs. However one you restore or update it unfreezes and changes nonce.
yes
can I just do a partition?
but once there is
Okay, thanks for that explanation, so you're saying that without jailbreaking, downgrading is a one time thing? And if something goes wrong and my phone gets stuck in say a boot loop, then I'm SOL?
Also, can downgrading break any iOS features? like for example I saw that face ID broke for iOS 14 users while trying to downgrade
No I’m saying without jailbreak you can still update to an unsigned version not downgrade
And the blobs are very specific
Downgrading to 14 still breaks faceid yes never affected touchid
If it's an unsigned version, what's the difference between upgrading and downgrading?
Let's take an example:
If I'm on iOS 15.0.1, without JB, I can upgrade to 15.0.2 with saved blobs but not go to 15.0 even with saved blobs? Both versions are unsigned so why does it matter? Sorry if it's a noob question, just trying to understand
there is a way to liveboot mac os?
no
😔
can you teach me to become an iOS hecker?
show me how
Not specifically everything but like a path to follow for a beginner like me
you cant use blobs at all without a jb
for that device specifically anyway
36 votes and 31 comments so far on Reddit
Thanks !
Any personal recommendations?
read all jailbreak exploit writeups
I'll do it when I learn C/C++
I'm now on my intel core i5 computer and still.. downgrade doesnt work
ERROR: Exploit failed. Device did not enter pwned DFU Mode.
Still on step: ```Linux
Put your device in DFU mode.
Download and extract Cryptic's patched ipwndfu for A10.
Open the extracted folder in a terminal.
Run python2 ipwndfu -p.
Run python2 rmsigchks.py.
It doesn't work on linux
You need a Mac
or MacOS
Yes
You all want to kid me..
I guess once a method is available to set nonce, then I can downgrade to any iOS version with saved SHSH blobs right?
provided sep is compatible sure
I am being honest I tried like 30 times it does not work
On linux?
Cool, thanks for the help!
It didn't worked for me on A10
Yes
I use an A10
Tried it on i mean
It was a ipad 7th gen
A10 Fusion
But it doesn't work (tested by me) on iPhone 7 Plus
I did it on a ipad 7th gen (wifi) 15.2
Wasted a lot of time.
I regret it now.
And the genius or another guy is firstly telling me that I should buy a usb port thing.
Because of AMD, yeah.
No comment
What you need is a MacOS or a Hackintosh
Im pretty sure it does work for Linux because a guy posted a video 1 day ago exactly with the same method we are trying to use
A further requirement is probably needed, but what..
No, not really
Wait
We have A10
Ok
Try this guide
Its the one i use for pwned dfu
It May not work for alot of times
That’s exactly the guide we are using
ERROR: Exploit failed. Device did not enter pwned DFU Mode.
I got that like 50 times lol
By writing the first python command..
Welp that sucks i am sorry i dont really know try it with sudo Ig
Already done 🙂
Oof
I try to spam again
Oww do you have a AMD cpu
ipwndfu hardly works on linux so if you managed to get it to work its a miracle
Yea it worked with mine
Now i can do it the whole time idk why
At first i Needed to try like 50x
works fine for me 
I use @rch btw
I DONT understand it
WHY is the python script makes the phone leaving dfu mode now
It it sooo stupid
Well, thats better than exploit fail
I really hate it.
I am working for hours to make this shit work
Keep trying
I have my touch 7
I got 14.5.1 working after 5 months of trying.
Not pwning
but the python script immediately disconnects dfu now
But restoring
How?
Just keep trying
It depends on usb stack
Intels is better
didn't worked for me, I'm on intel
And check dfu state with lsusb
I was on ubuntu too
A10?
skill issue
wao que pro
what is this mf doing - its been on here for like 5 minutes
(8 plus gsm, 15.1 to 14.3)
also, my phone keeps rebooting into recovery mode and shutting off again
ohh apparently thats part of -w nvm
lol
lucky mf
i be here struggling
it says that the "blob in my build name doesnt match the one in the ipsw name"
its unsigned so ig that should make sense
what am i meant to do LMAO
A tool to save your SHSH2 blobs online without using the CLI.
says its valid for 15.1 which is what im trying to downgrade from bc i hate it
(i have no sim card lol, using futurerestore gui)
You are on What device?
8 plus gsm
You should enable Pwned Restore and Set Nonce to Blob's
Oh and enable FutureRestore Beta
thanks, praying that this works
okay so im past downloading se firmware but
its stuck on checking buildidentity
should i disable the ap nonce collision
yes
are you kidding me
you downloaded the right ipsw for your blobs right?
i have no idea what im doing bro
i downloaded a 14.3 ipsw which was unsigned
and im trying to use futurerestore bc its unsigned
i dont understand any of this stuff
do you even have 14.3 blobs
no bc im stuck on 15.1 and have never done this
yeah you cant downgrade
futurerestore requires blobs for the target version, and they have to be saved while a version is signed
unfortunately yes
okay you can try going there then
I am using a iPad 5 (wifi only), do I need to select "No baseband" and "No SEP" or just no baseband
no baseband
I get the error message "what=APTicket can't be used for restoring this device"
you're using the right blob for your device right
Im using a blob for 15.1 and am using a 15.1 ipsw so I would say yes
and you saved it specifically for your device right?
si
check and compare the ecids just to be sure
I'd imagine you can only do so much with a ecid
if someone wants to slightly inconvenience me, they can go ahead
i mean you could effectively be banned from major repos
not really a good thing in general to leak your specific device identifier
Filter 
seems like a dumb rule
didnt think about it like that, I use it for the ipogo repo because their ssl doesnt like me
in that case its still technically piracy
That logic doesnt make sense but sure
why doesnt it make sense
you're getting it from somewhere that isnt the official repo without their permission
hence, piracy
okay Ive legitimately tried everything I can think of to get futurerestore to work, but now it just goes to a boot loop with the following output
Finished downloading the latest firmware components!
Found device in Normal mode
Entering recovery mode...
idevice_event_cb: device [redacted] (udid: [redacted]) connected in normal mode
DEBUG: Waiting for device to disconnect...
idevice_event_cb: device [redacted] (udid: [redacted]) disconnected
DEBUG: Waiting for device to connect in recovery mode...
irecv_event_cb: device [redacted] (udid: [redacted]) connected in Recovery mode
INFO: device serial number is [redacted]
irecv_event_cb: device [redacted] (udid: N/A) disconnected
irecv_event_cb: device [redacted] (udid: N/A) disconnected
irecv_event_cb: device [redacted] (udid: N/A) connected in Recovery mode
irecv_event_cb: device [redacted] (udid: N/A) connected in Recovery mode
irecv_event_cb: device [redacted] (udid: N/A) disconnected
irecv_event_cb: device [redacted] (udid: N/A) disconnected
irecv_event_cb: device [redacted] (udid: N/A) connected in Recovery mode
irecv_event_cb: device [redacted] (udid: N/A) connected in Recovery mode
That ending bit with the connected and disconnected seems to go on forever.
Command I used
./futurerestore-v2.0.0-215 -t 18.shsh2 iPad.ipsw --latest-sep --no-baseband -d
I'm on iPad 5 (wifi) ios 12.1.1 trying to update to ios 15.1
can i save blobs for ios 14.5 on my ipad (its his current version)
Depends on what iPad you have
You can dump your onboard blobs with deverser and a mac
Or the system info jailbreak tweak
can i downgrade iphone 6s from ios 15.2 to 14.x?
i looked at that github and A9(X) is coming soon so i think thats for iphone x
and then a8(x) - a9
ah nvm just saw that it needs macos
but i dont have mac
cant i use windows or linux?
A9(x) is iPhone 6s, not iPhone X
a9 needs macos because eclipsa though
Wdym
No it doesnt

going off of this
@valid adder what do you mean
You can do it with linux
With this fork
On a8 and a9
Well a8 has a broken patch with fr
But a9
im pretty sure you’re also like one out of like 2 people to get ipwndfu working on linux
I was told many times that that requires a usb shield
A8 and A9??
Yes ipwndfu
Hi everyone! Kudos for the support and patience. Read all the guides but wanted to double check I got things in order before biting the bullet and futurerestoring my iPhone 8 from 12.4 (jb w/ unc0ver) to 14.3. Has anyone restored successfully to 14.3 recently with the latest/15.2.1 SEP, is it compatible? As I don’t have a mac what are my options for doing this? Windows will fail? Linux VM? Live disc?
It appears you are asking if you can jailbreak your device, you can find out that information by using /canijailbreak or in the "Get Started" section of ios.cfw.guide.
you can futurerestore however you will need to live boot linux or have it installed already
I’ll give it a try tomorrow. Should I use the latest futurerestore linux beta from m1stadev?
Always
Is there away to get ahold of img4tool v1 compiled for mac. Need it for deverser. Futurerestore related cuz cant restore without onboard blob lol
Bought this 10.13.6 mac and need old img4tool for it to work
I can build it for you
You don’t need old
You just need one built for minver 10.13 or lower
It’s just an sdk thing
My futurerestore is always built as min 10.12 for this exact reason 
Really? @valid adder would appreciate it mac noob here
Literally just bought this mac off of ebay for deverser and futurerestore stuffs
Since on windows FR is buggy
is that discord pink?
Hey I'm having trouble with updating my device. iPhone X global version on iOS 13.5. I have saved blobs for 14.7.1.
I've set nonce to 0x1111111111111111. On unc0ver jailbreak. Picked blob and ipsw file. Selected Preserve Data (--update). When I press Start FutureRestore I get "SEP firmware is NOT being signed!". How do I overcome this?
use futurerestore beta on mac or linux
What do you mean?
I did a backup for my shshs and i wanna check what ios verions blobs r saved
Of its possible
uhh what jb are u using
cause taurine for example saves them automatically
so there is an easy way to check for that
shshs.host has a verify option where you can upload a blob to check it
not entirely sure if it tells you the version though
blobsaver should have the version in the filename though
is futurerestore what i use to get my ipad air 2 to ios 14?
if you have the blobs
rip i don't
when 15.2 jb is gonna come im gonna be able to downgrade with my 14.8 blobs via futurestore?
idk i like ios 14
the settings gui and evertyhing on 15 sucks
also i can do it with windows rightv
How many times can a blob be used? Infinite times or just one time?
infinite
It’s intended use is nonce
Nonce, number-useonce
Blob is saved using devices nonce
Nonce is one time value
Also it’s random
So.. the answer is not infinite
So by design only one
But
It happens to be infinite because we have control over the nonce mechanism
We can set whatever nonce generator we want
So yes it is infinite
I wasn’t finished making my point
Thank you for your detail answer 🙂
i have amd pc. does it matter when doing ipwndfu? cuz it kick me out of dfu when i try to start the script
0%
@remote magnet get the pci usb card
anybody able to answer a question for me rn?
Just ask it
Someone who can answer it will come around eventually
If you ask if someone can answer your as-yet-unknown question you'll get a "no", because no one knows what it is
I get a error on futurerestore GUI that says failed to extract firmware from ipsw can somebody help me with this?
Currently, I'm on version 15.1 beta 1. I found SHSH Blobs of 13.7 on the drive by chance. Can I downgrade the device from 15 to 13? The device is not jailbroken as it is known. Thanks.
my device is i11p max
Unfortunately my build doesn’t support it 😦
https://gist.github.com/nyuszika7h/aac55c97f7925cddcf5ec3167f85dfe8
For this what linux you prefer? I don’t have Mac
I tried with ubuntu it’s not worked
How can I boot into recovery mode after setting nonce in dfu mode?
Forgot to mention I use an iPhone 8
How do u set nonce tho? Mine say failed to enter pwned dfu mode
put it in dfu mode and 'python2 ipwndfu -p --patch' on macos
Oh macos 🥲
It will work on linux cause I tested on fedora but it will work on intel only
I have intel but it didn’t work on ubuntu
U can see there
what iPhone are you using?
Iphone 8+
do you have libusb installed?
try this 'sudo apt-get install libusb-1.0-0-dev'
how about this
my iphone 7 ios 15.1 It says the exploit failed when I try to setup a nonce
It appears you are asking about future jailbreaks. Nobody knows when a jailbreak will be released, but you can subscribe to notifications about releases by going to #roles.
No you can’t
I have the same problem
ty
Thanks @valid adder .unfortunately when i enter alpine in terminal for deverser it just hangs tho
And ive been trying to get deverser running on ubuntu live usb but im getting stuck here with this error
(Higlighted)
I got it workin around a month ago but its live usb so when i restarted the whole os gets wiped obviously. Never had this error before tho. Does anyone know about this one
Seems to be libgeneral related. Ill do some tests. Im a linux/mac noob but it never asked for libgeneral before. Is that a linux thing where things need new dependencies or am i missing something here
hey can somebody walk me through restoring to 14.8? I have the blobs
im on 14.0 rn btw
Futurerestoring to iOS 14 on Face ID devices breaks Face ID
wdym
Do you use Face ID?
yeah
even 14.8?
Any version of 14
Breaks it
No matter what
Touch ID devices are unaffected
delayOTAing a device gets around this problem by not updating the SEP
so its possible, right?
To futurerestore? Yes, but delayOTA is better
14.0 has untetherred???
Do u know how to install these two packages
which will happen sooner, 14.0 or 14.8?
oh ok
what exactly does untethered mean again?
Jailbreak is activated on boot
so if my phone dies it wont unjb?
how untethered is fugu?
Currently it only works with unc0ver but how it works is the u0 app is never unsigned
So you don't have to refresh sign etc
oh ok but it will unjb on reboot right
Yes
oh ok
Ive been trying to get img4tool working for 3days now can anyone help 😦
ok cool
^^
oh also whats the difference between semi tetherred and semi untetherred
Semi tethered means the jb has to be done with a computer
And if your device restarts you have to rejb
Types of jailbreaks:
Tethered
The device must be booted using a computer every time, otherwise it won't boot at all. This type of jailbreak is uncommon. (e.g.: redsn0w)
Semi-tethered
The device must be jailbroken using a computer every time it's rebooted, otherwise it will boot in unjailbroken state. (e.g.: checkra1n)
Semi-untethered
The device must be jailbroken using an app every time it's rebooted, otherwise it will boot in unjailbroken state. A computer is usually used for the initial installation, but it's not strictly necessary. (e.g.: unc0ver, Odyssey, Taurine)
Untethered
The device will stay jailbroken after a reboot, no additional action is required. This type of jailbreak is uncommon. (e.g.: Pangu9, Fugu14)
Semi untethered means the jb is done with an app on your phone
And if it reboots you have to rejb
why did the bot say fugu was fully untethered?
It's just not fully developed yet
fugu14 is untethered, unc0ver isnt
ohhh... ok
even implemented into unc0ver fugu14 does untethered stuff with the perma signed app
no, but sep has to be compatible to use them
So sort of
the blobs themselves wont but your ability to actually use them might
*For devices that support 15
which is all of them
iPhone 6 says hi
any device that ran ios 13 runs ios 15
6 stops at 12
can blobs be saved while unjailbroken?
Excuse me why are you letting it compile img4tool when I gave you preconpiled img4tool?
Yes but only for signed iOS versions (and currently that is only 15.2.1)
You can save blobs for your current iOS version though when jailbroken via deverser
@valid adder The one you gave me was for my macos, but it hangs when i type in alpine, and couldnt get passed there.
Am trying to get it running again on linux but am getting different problems than when i actually got it working last time around a month ago
Hi, is there anybody available to help with downgrading 15.2.1 to 14.4 on an 8+
im getting this error - Device did not reconnect. Possibly invalid iBSS. Reset device and try again
i tried with the device on and got this error - Device ApNonce does not match APTicket nonce
Are you using the pinned guide?
oops, ill take a look
Your nonce is not set
Use futurerestore to do so
I assume you have a mac/Linux machine
yes
If you use futurerestore in the terminal you can add the “—set-nonce” option and it will set your device nonce for you
Just remember to remove the option afterwards
If you use FuturerestoreGUI enable the “Set-nonce” option
Also remember to remove it afterwards
Remember to put your device in pwndfu mode
ahhh i see. and am i setting it to 16x1 or the random code
Oh yeah add —use-pwndfu
You don’t need to worry about what number it is
It’ll grab it from your blob automatically
sweet
Make sure your device is in pwndfu
ok
Everything should go smoothly if that is the case
can i restore an ipad air wifi to 10.3.3 with blobs?
1st gen a7
You may use iOS-OTA-Downgrader
i had no luck with that as it fails to put it in ipwn
Checkm8 is unreliable on a7
Checkra1n issues for A7 Devices on Linux Hosts:
Checkra1n won’t really work for a7 devices on a Linux Host. You will need to do a replug trick and may even need to use an older version of Checkra1n.
Tutorial: HERE
Ignoring the checkra1n part you may need to do this “replug” trick
10.13.6
yep i’ve tried at least 30 times
are you sure?
Yes
A7 is a, excuse my language, a bitch sometimes
It took me 3 days on my 7
Not that I know of
also will the wifi still work and is it unthethered?
Should be
oh ok
because i used an iphone 5,4 to go to ios 7 the theres and it has no wifi
thethered*
If you didn't use the latest baseband, ye wifi/cell won't work
all i did was select ipswich and did 7.1.2 and then i did boot thethered
ipsw
but is there a way to enable wifi?
Update to iOS 10 afaik
Not that I'm aware of
Wifi/cell doesn't work because of the GPS rollover thing in 2019
iOS 10.3.4 fixed that with a new baseband FW
10.3.4 is only one the 5 not the 5c
?
10.3.4 supports 5C
does it?
..yes
Will warn you
?
10.3.4 has no untethered jailbreak like 7.1.2 does
Though 10 does have better app and internet compatibility
i agree but since i can’t use wifi it’s useless
Fair
i cant figure this out. i cant get future restore in terminal to recognise --Set-nonce
Well that’s not my img4tool fault because that’s executed on Mac not the device
i’d say put your phone in DFU mode
Because you need to be using beta version on Mac or Linux and it’s lowercase
ok
Not just dfu needs to be patched dfu mode
how do i achieve that as i am having problems
and this definitely works? im on 15.2.1
It’s in the guide
oh ok
Requires a checkm8 device but yes it works
8+ works yes
It’s in the guide
ok ill try the latest beta version of futurerestore
ok i feel dumb, i have no idea how to patch dfu
how come a7 devices are really hard to exploit with checkm8?
I’ve said 3 times now it’s in the guide….
To be fair we literally do glitch it into doing what we want so I’m not surprised
yep but it’s a really old chip so it shouldn’t be that hard tho?
Bribe someone with money and a7 to write a better exploit
Check-m-seven
This is why I shouldn’t make exploits lol, I wouldn’t be able to name them
@valid adder how was i supposed to install it on mac? I copied the extracted img4tool file to usr/lib/bin iirc
Thats pretty much all i did
You did it fine the wasn’t even remotely the issue
When i would run deverser commands, after putting in wifi address and alpine password it would just hang there
delete ~/.ssh/known_hosts file
I have know idea why you think img4tool has anything to do with ssh
i have a java issue, Unable to locate an executable at "/Library/Java/JavaVirtualMachines/jdk-17.0.2.jdk/Contents/Home/bin/apt" (-1)
Does deverser not work on ios7-10? Turns out that the imgtool that cryptic made indeed works on ios14 devices
But i have 5 devices on 7-10 and its not saving for any, or just hangs
can anybody help with "no backend available" when running python2 ipwndfu -p --patch
Like I said at least 3 times hanging is nothing to do with img4tool @rain owl
Do what I said
Delete that file
ahh, i have m1 macbook. i think thats my issue
You need libusbmuxd from brew
@valid adder yeah my bad i meant deverser hangs. But i found out the hanging is an openssh thing. Your imgtool is working on all my 64bit devices btw, ty
Idk know of an alternative for 32bit devices tho, a5-a6 blobs dumper is for yosemite and lower only
Of course it’s an OpenSSH thing lol I told you the fix for ssh lol @rain owl
You don’t even need a computer to dump blobs anyway
ay bro you know how to MITM a request to gs.apple.com and block the response, using mitmproxy?
tryna save blobs for 14.8 through otadelay without updating
I mustve misread, juggling work sorry. Are u refering about system info? It doesnt work on ios 7-9, im getting errors. @valid adder
Pong
Ooh
TIL. How do u dump them w/o a computer then ? No wonder deverser gives errors too @valid adder
Computer required on 32bit
Deverser is literally disk1 so it won’t work
Don’t even try
Yea ok got all my blobs for all devices, ty for all the help appreciate it
@valid adder
And on another note, is FR working for 6s with 14.3 blobs after 15.2.1 got released
Ik it was working for 15.2
Is there anywhere to check whether the currently signed SEP is compatible with a specific version?
Like, if I wanted to futurerestore my iPhone 8 to 14.8 after delayOTA window closed, would I be able to? Or if I wanted to futurerestore to 15.1b3?
Just got an error in new FR gui
Forbidden
And device turned black screen
(From apple logo)
Uh working now idk, had to try twice
Okay I’ve tried all my best but still nothing work. downgrade from iOS 15.1 to 14.8. Python script part 1 was successful but part 2 futurerestore GUI didn’t detect my phone even its in dfu mode.
I turn on my phone manually to check. And it detect my phone but it say “pwndfu enabled, but device in normal mode”
When i turn my phone in dfu mode its say “init device not found”
I have 3 laptop i tried on all same problem everywhere.
I tried ubuntu 20
Ubuntu 18
Xbuntu 20
My device is iPhone 8 plus.
Can anyone tell me what’s going on?
Maybe there’s any driver that I missed or something else? It’s just don’t detect my phone. On the other hand my phone is detected by iTunes in dfu mode but in linux futurerestore GUI can’t detect it.
Start future restorer as root
But how in the hell did you manage to get into pwn dfu mode
I tried 1000 times, my device always just restarted
or at least throw an error
Same thing happened to me sometimes it’s worked sometimes not im trying for 2 days lmao
How to start as root? Currently i have xubuntu
add sudo before the command
I have intel
But i run futurerestore GUI without command. Im confused
Yeah, start it with terminal then
Lemme check it
Which one i should download?
Before I download futurerestore debain.deb
Nah 🤣 I don’t even know what command i have to use in terminal
You can tell me command
sudo <yourNameOfFile>
Go and watch the video you were watching again ...
Teaching basic lesson for linux is not my goal
I got it now it’s working thanks guys 😘
Year 2040 and I still can’t access to this pwndfu
What is remiel?
And does it work for Linux/Windows?
😔🔫
ramiel*
i can’t use mine and i’d never had 💀
it’s got a file lock coz i get it from so,eone
i know the password
but the keyboard doesn’t work 💀
i was wondering if i can connect a mechanical keyboard to the usb port
idk
i don’t have any though
the only keyboard i have is a wires
less
what if it doesn’t work and also what’s the cheapest
hmm yh
true
i guess so
but what’s the cheapest u can get
ok
rip
Ok I give up downgrading my device to 14.8
this pwndfu mode is destroying everything
Waiting for iOS 15 jailbreak i think
I was trying for 3 days literally
i need to jailbreak so
each day 2-3 hour time investing
it would be impossible
so don’t waste your time please
Well.. nobody would downgrade if a jailbreak was available for the current version.
It is possible to downgrade. Some people managed to get into pwndfu mode.
Just people like me can’t.
no u need to be jailbroken
Who in the hell did you tell that? Yeah, jb is an option. But if you manage to get into pwndfu mode and able to set nonce with futurerestorer (jb not required), you have no problems.
There are several videos how it’s done on macs. But I dont have a mac
There is a video for linux too, but yeah, pwndfu mode is buggy
THIS IS NOT THE TOPIC
it is
It is useless to discuss with you
future restore gui is future restore
I tell you one last time again
and also baseband and sep won’t work
The problem is entering pwndfu.
And sep and baseband will work, because its compatible with 14
False
oh hello
How to fix?
Hello



