#tech
1 messages · Page 18 of 1
Use the help thread I linked in #general-chat
Does anyone know what to do if multiple of my keys on a Huntsman mini doesn't work?
@vague crag quick question did you update your headset if yes while updating did you close all programs like synapse and suchh from the task bar
The firmware update software automatically closes that stuff
on the website is says so thats why i asked
bought a new one
need to update it
but don't know if the update ruins it or not
@vague crag on the website the product number is "RZ04-03460" on my box it says RZ04-0346 or RZ04-03460100 should all be same right
RZ04-03460 is indeed the kraken v3 pro yes
what about the ones on my box then
i was curious if it matters or not
Probably not no
hmm
does anyone know the pcb thickness on razer's blackwidow v4 75
100% like that but i am trying to do a Razer build for the most part, i have a spare Naga Pro mouse already and a Kraken headset to start off
ahh i see
screaming stars
i might build my own keyboard
aswell as its own software
razer uses MCUs for their keyboards that are probably too overkill
Wich version of the kraken
Blackwidow razer keyboard is goat for me tbh
Usd?
iv tried everything i know but my razer viper ultimate one of the side buttons reacts slower than it used to and the buttons are fine iv tried everything cleaning updating etc
just send them back if you have warranty so they can either fix it, refund or give you a new one
i had a problem with my scrollwheel i couldnt fix just sended it because i had warranty for it no i am simply waiting tbh
iv had for like 3 year so no box or anything
never had a problem until 2 week ago
Im using Razer Barracuda both on my phone and my pc its pretty good but if you are using it like 20h a day like me the plastic corrodes over time (or atleast i have that problem xd)
But overall its a good wireless/bluetooth headphone (there are not many hot swappable headphones like that)
I recommend it very much + earpads are so soft i can wear it for a long time without having a headache (i have migrane so its really important for me)
Damn maybe you should change the mouse then if it bothers you alot
ye might doo
Do you also need a new desk and chair?
Yes @limber stag I need desk chair everything and USD
Razer uses cheap plastic for the Barracudas.
It will crack nonetheless.
Okay. Sit stand or traditional
Siting preferably an L shaped one
K
Those tend to show up on second hand stores more often so it’d be best to check there.
do I enable snap tap and rapid trigger or continuous rapid trigger when playing valorant?
it wont let me enable snap tap and rapid trigger
but will let me do snap tap and continuous rapid trigger
I got two razer blackshark v2 pros and they a fire 🔥🧩🤧💯 can’t believe my friends sleepin in them
yeah they a fire 🔥☠️ 🍔 🦅 🐢 💯
my mouse (viper v2 pro) cant connect on wireless mode but still work if used wired normally, how can i fix that
#1019758370653220915 but battery could’ve failed
is there any way to fix that?
Hardware failure of the battery? No not really. I’d try troubleshooting in help first though. Could be a software issue
it's still not working on wireless mode, it still has warranty maybe sending it back for a new one can also be an option? seems like a last resort tho so I'm still looking for ways to fix it if anyone can suggest
I don’t see a thread from you in #1019758370653220915
if that exhausts itself though yea RMA time methinks
someone can help me with a question? im actually with a concern about the blackwidow v3 tenkeyless in asia, all the photos or store links from asia call a keyboard much similar to the v3 as ''blackwidow x tenkeyless'' it is the same keyboard or different ones?
for context a keyboard offered and called ''blackwidow X tenkeyless''
and the blackwidow sold and called as ''blackwidow v3 tenkeyless''
i have a razer barrucudda and it is not a loud mic how do i fix that
Hi anyone have a mouse naga trinity able to run on a Mac
guys it shows my device but i am unable to open it
Restart synapse and reseat the device
o i tried the beta version and it worked, i tried restarting device and synapse 3.0 multiple times but it didnt work for me
Any soundbar recommendations for PS5? I mean I wanted to put this under an 27 inch gaming monitor with HDMI 2.1 FRL eARC, and need Spatial Audio support.
hi guys, tryting to do the update for my viper v3 pro and ive downloaded it but it wont open, any suggestions ?
hey! razer mouse macros working on faceit ac?
In the support page.
hey all . not sure if this is the right place but -- i just added the leviathan v2 ( just the sound bar ) as the bar and sub were 100 over my limit at the time. all that to ask is - is there a place to just get the subwoofer ? or can i use and sub ? i just haven't been able to find an answer . thanks all .
does anyone else have the hunrsman v3 pro and have issues with keys randomly not registering when held or pressed? wondering if its software or if my keyb is broken
can anyone pls tell me how do i play music through my mic in vc? thank you
Anyone here run a skytech gaming system? Thinking of going through them for my rebuild
Hallo
Not methinks 😮💨
hi
That's a fox?
Bat eared fox to be precise
So what do we think of the new PS5 Pro?
disappointed there isnt a disc drive for $700 usd but good specs
considering the specs, the price is pretty justified. I've seen a few people suggest "just build a PC instead"... sure, if you want to spend an additional $1k on matching the specs
now we need more console games to not be locked at 60fps to take advantage
I normally ignore that sort of asinine stuff, but I do feel like $700 is a bit much when we are presumably rolling into the console's midlife. Or what we hope is the console's midlife - who knows what Sony ends up doing
Is the razer raptor worth it?
why does the audio stutter when i connect my blackshark v2 hyperspeed through bluetooth?
what is the difference between razer huntsman mini and razer huntsman mini special edition
The special edition is special🎇
bruhhhhhhh
I just bought headset from razor which isnt connecting for some reason, its detected by the app, but it keeps blinking whatever i do or try, downloaded firmware updater and it tells me to power on my headset but it doesnt detect that either
any idea what could be the problem?
searched many reddit threads, people seem to be able to connect it with eq button, but i dont have that button on my headset
Hi I have created a couple test profiles, and stored to huntsman mini on-board memory, then I close synapse and of course I expect to keep it, but current profile is lost, and I cannot switch profiles either anymore with the assigned keys. So it seems on board memory needs synapse running and this makes zero sense. Any tips on what I might be doing wrong?
ok probably here is the tricky part...
so to transfer my setup properly from my home pc to my home keyb connected by a direct cable, seems I need to log in remote first... geniuses 👏
Another funny thing....
if you don't see the firmware here... do follow the instructions
so far so good...
Is the Razer Kraken supposed to only be one channel on the mic?
My computer sees it as just a single-band input
what mouse should i buy with a budget of 150?
i just loss my Razer viper Ult USB thing, can you get a new one or do i have to buy a new mouse
After I reinstalled w11, the touchpad did not respond. What should I do?
Viper V3 Pro if you can afford 10 more dollars
alr and for 100?
there are many choices but what I am confident to recommend is the Deathadder V3 Hyperspeed
ok
what do you mean "usb thing"?
dongle?
DA V3 Pro.
Good shape, good specs, 8khz compatible.
yep
amazon sells dongles for the viper ult
but they are sometimes usad
also ebay
if u buy a used one how do i set it up?
Usually via a pairing utility
ight
Guys my razer deathadder essential isn't lighting up or working? the sensor is lighting up red underneath. is there any way to troubleshoot before i try to claim my warranty?
Hello, i went from HyperX headphones to
Razer Kraken V3 and they sound weirldy deep
bassy overall just bad, is there anything i can fix
in the EQ or anything?
Hello I was wondering if someone has the same issue
Razer BlackShark V2X USB
7.1 Audio not working not getting any audio from it and one time it worked but when I restarted my pc it stopped working
Any ideas how to fix this?
does the barracuda X mic work on the razer kraken v3
Hi, I’m not sure if anyone here uses the Razer kishi v2 pro with the Razer edge or just an android phone, but I have had a issue with mine and I can no longer play using the kishi, it’s imputing 2 buttons no matter which one is pressed the L3 and L1 do each others jobs aswel as there own
does the barracuda X mic work on the razer kraken v3
I have a problem: my Razer devices disconnect and reconnect within 5 seconds.
ок
my cpu is broken or something whats up with it
Hey for the Wolverine V2 Pro PS5 controller does anyone know what the unlock and lock switches on the back of the controller do??
changes how far the triggers go iirc
Does anyone have any idea on how to troubleshoot Nomo Chroma speaker static issues?
#1019758370653220915 saiso might
anyone have any experience with the thx onyx?
missing uninstallation file
you can probably delete the entire razer cortex folder in program files
can u help e do that plz
idk man
you can't uninstall it without the uninstallation file
otherwise just smite the program off of your pc by deleting all of its fragments in your program files
does anyone know if the Kitsune controller is supposed to appear in Synapse? all my other products are there but no luck with the new controller I bought
I don’t think it’s compatible
I wish I had asked earlier but I guessed it was a safe assumption. Already updated firmware. Ran the diagnostic tool, reinstall synapse, unplugged all devices, etc. An hour later and I just realized to ask
Rip
Can someone help me?Can I connect up to three Kunai fans to the 3 pin male connector and the Daisy Chain?
So I only have to connect 3 fans to one argb connection on the motherboard
Can someone help me with getting a macro? I’ll pay you
sometime later he should add on with motion sensors
so the skateboard can like react to the legs hitting the board/ the board itself flying
Anyone ha a issue with Razer Ornata TKL V3 where no lights work?
Let's not post this in every channel
We use motion tracking sensor attached to trucks we made a skate game you can play against other people all over the world.
https://www.ollee.app/ one of them they have a few different sizes some are very small using cell phone technology.
Introducing Ollee Skate Tracker – the skateboard companion device! Track and analyze your skating sessions, metrics, and progress like never before. Play the Ollee game via the mobile app to earn points, collect badges and compete on the leaderboard. Connect with fellow skaters from around the world
Hardware rest ?
I had a similar issue and I found that simply just going through chroma razor, you will usually just have to reset the RGB setting there
Razer wolverine V3 pro I'm having a problem with dongle on PC when I turn PC off and come back later I turn controller on and it connects but PC does not recognize until I unplug and plug back in dongle anyone else have this problem on PC?
A whole row of keys on my blackwidow v4 isnt working, everything else is fine, just the a,s,d,f,g,h,j,k,l keys
What do you think it means?
https://discord.gg/atariclub
Part List - Intel Core i9-14900KS, GeForce RTX 4060 Ti, NZXT H9 Elite ATX Mid Tower
Is motherboard compatible, my friend doesn't know how to update bios on it.
it should be compatible, but why a 4060 Ti with a 14900KS?
He's going CPU + RAM based.
So does he need to update it? He doesn't know how.
And it says he may need a different CPU, idk.
Yes but why lol
Running a bunch of accounts.
Raptor lake refresh should be compatible with z790 out of the box
I just need to know does he need to update bios and if so, does he need a different CPU or not
Ah
updating bios is easy, but a z790 should be able to support the 14900KS out of the box
If he does end up updating it, does he need a different cpu?
Anyone that can help with the Macro Keys? I keep getting this annoying error that says 'This requires Razer Synapse' it worked for me before, but now all of a sudden it doesn't work
Are you trying to run it without synapse? It’s not an error per se just a notification you need the software up for the macro to function
No, of course not. The app is already open
What’s the error then ? Is the macro just not working when pressed? If so #1019758370653220915 is probably a better bet than here
how do i assign a macro to a profile
get a used 3070 instead of 4060 ti
hey I have a slight problem my Viper Ultimate stopped working wirelessly only cable works... it is lighted up the noise appears when I plug the 2.4 connector but It isnt responing ... anyone with the same problem?

When i use 8000 polling rate some reason my sensitivity in game feels slower please help
#1019758370653220915 but might just be the fact the movement is smoother
Im not sure because sometimes it feels fine but sometimes its slow
how good is the RAZER macro?
When i try to use my Hyperpolling dongle it doesnt show up in synapse and i can only use 1000 hz but then i still get mouseflicks
Hello guys i just have a fast question, can i pair my wireless razer basilisk v3X hyperspeed with a USB dongle without using anything else other that what i just mentioned? just a wireless mouse and a USB dongle and ofc the pairing App
Hello, administrator, I would like to ask about the redemption time of my Razer Gold Gift Card. Who can help me?
Can I have help with my razer cortex? It seems this newest update has caused a problem, please and thank you.
the issue started from an update today, and when it finished it has made my resolution flicker and play a usb disconnected noise every 10 seconds. (i unplugged everything but it keeps going).
razer cortex for me has recently made my laptop hotter than a volcano i had to uninstall it
Why does my sens change when i use 8k polling rate as in it slows down
(i have never had this issue until couple days ago)
So won't I be able to update my Kiyo Pro or what?
Hi guys, when trying to update my mouse the firmware update software wont even open, has anyone had this and fouind a fix ?
what does hyperspeed do on the razer deathadder v3 hyper speed?
can someone help please
I got a razer blackshark v2 x headset today and I've been trying to test the mic but the playback and recordings are all very low. The audio works just fine but I can barely hear my voice through the playback. i tried increasing microphone levels but now its just staticinthe background and barely my voice
i tried the bot in #1019758370653220915 but nothing it suggested worked
Is it possible to upgrade a fixed ram on razer
laptop
Do u mean upgradeable ram? If so, yes u can upgrade the ram from razer laptops
They meant a soldered row of chips
Ah some razer laptops come with soldered ram sticks?
Oh gotcha
hello everyone i got the Black Shark v2 x (3.5) Yesterday and the mic is capturing my laptop/system sounds my friends hear everything i hear whether it may be on discord or any application or on any other device i Tought that 7.1 surround sound app is causing this issues so i Uninstall it ,but i am still facing the same issue plz anyone help help
No News yet?
Hey dies anybody know why one the razer synapse my headset is detected as turned off when Its turned on>
?
I have a razer blackshark v2 pro
Did you remeber thèse?
guys how do you fix the irql_not_less_or_equal error
i've gotten 9 of those in the past week
That depends on what is causing the error. Have you made any changes to your hardware or drivers lately? If so, that's the first thing to check. Roll back updates or go back to last known good config of hardware and software. If error goes away, whatever changed is likely the cause. If you still are getting errors, pay attention to what you are doing when it happens. Launching a game or app? Idle doing nothing? Waking up from being asleep / off? Etc
quick question
ive been playing with a razer kaira x on my xbox for some time now
but ive noticed that, sometimes, for around a week, the audio becomes really electronic and static-like
any solutions?
are they speakers?
Yep, USB no-rgb (just a thin blue line) stéréo speakers.
those are cool! they are called Razer Ferox? Im not familar with them. when was their era?
Around 2010+
have cat? and warm computer case top? Bad airflow?? Solution https://www.reddit.com/r/pcmasterrace/comments/1fjy7ke/figured_out_how_to_keep_the_queen_happy_and_the/
We were doing it all wrong! You are supposed to get the proper mount for your Cat Purring (Unit). CPU. Its an external mount. https://www.amazon.com/WALI-Monitor-Adjustable-Underneath-Supplies/dp/B094QTGHNZ?th=1
Specification: * Dimension: 14. 6 x 9. 3 x 5. 5 inches (L x W x H) * Supports: Maximum hold up to 44lbs / 20kg What is the stand riser suitable for? * Computer Monitor Laptop Printer Notebook Most LED, LCD, OLED Flat Screen Display Why do people need to choose a riser? What benefits can we get fr...
is Barracuda and Barracuda X's pads are same?
Does anyone know a good around 200g gaming mouse? I’m tryna get something for my brothers birthday and he prefers heavier mice
Just buy him the Viper mini signature edition. Its the heaviest mouse from razer.
anyone recomend a good streaming camera for newbies
350 bucks *hust *hust
i have the razer deathadder 2 essential. But should i upgrade to the razer deathadder V³ X hyperspeed?
because my old mouse is broken
Heck yeah
Nvidia RTX with multi monitor support is now working in the latest driver.
Ey bro. U good?
synapse isn't detecting my headset even tho I reset my computer already and took out the usb and put it back in

shi i might just
(deathadder v2 x hyperspeed)
Is there a way to turn off the blinking of the mouse when my PC is off? Or do I have to switch the mouse off everytime?
#1019758370653220915 ask there and Saiso should be able to assist
Is there a way to create a macro in Synapse that has more precise mouse movements? Like completely up, down, left, right, at a specific speed and specific number of milliseconds?
Synapse macro customization is not great.
I have a Razer Blackshark V2X headset, and its microphone makes a distorted sound most of the time.
its new...
Hello guys, I have a problem with my Razer Viper mouse so the problem is that usb of the mouse not working i try everything in there is nothing work . if someone knows how to fix that Please help me .
Have you made a #1019758370653220915 thread?
Oh i’m sorry i’m new to the server I don’t know how to do a thread
Gamer tested , Cat approved
lol. Someone pointed out that if your cat puked up there that stand has holes in it. My cats aren’t pikers yet thankfully but I still think it’s a great idea rather than your floof stopping up your fans or radiator
why
When will we see a fast response wireless huntsman?
V4pro
Soon
I like this collab tbh
Making my own razer light strips, took apart my old razer cynosa and imma use it for the rgb lol
Gotta clean up the wires but it’s honestly brighter than I thought it’d be
just buy an led matrix at this point
they're only a couple bucks
yeah fainly
#1292137237298810900 if some1 knows why plz help 😭
how do people fix the razer viper v2 pro battery issue?
Well the point was to not buy anything and have it work with synapse
#1281589508672065597 help plz
Anyone got one of these? They any good for gaming? It was like more than half of my new Razer in 1999 money vs. my 2021 money. Got mine from a woman trying to raise money for kids with cancer, she said it was free since it didn’t have a PSU, but I paid her $5 and came back with a laptop I donated, to her as well.
I was told it works but hoping because I really like him, but also looking for names, considering either “Dirty Dan” (he really dirty) or “Louie”
dang thats OLD
firewire
Just a question but is nvidia 610 good
Truly the firiest of wires!
He works too by the way, just needs to power supply now.
its a bit old
Hi guys i bought the Razer Leviathian X2 for gaming anyone got any advice on how to get the most out of it currently my monitor sounds just as good...

yo guys
i got a superlight 2 without a dongle
what do i do?
(i lost the dongle and there are no dongles available on the logitech web)
Yo can someone help me out with finding a monitor that would work best with a PC I wanna get?
scream at logitech staff until they offer a replacment
Depends on what your looking for homie... are you looking for crisp clean pictures with true black capes... or maybe some hdr... 1080, 2k, 4k, 8k.... are you going standard... ultrwide... or even super ultra wide.... are you looking for something to give you the edge in competitive gaming to try and counter the internet latency by increasing refresh rates with a 60hz 120hz 240hz and now 500hz hahahahaha I know monitor shopping is ridiculous now... but I'm just messing with you though lemme know what your looking for and I can help you find something
theres no way you forgot to register the headset and check your email for the code
😱
you do
did you check again
also choose the 7.1 option in the warranty support page and click your headset
and if youre eligible for a code youll get it
OH
you dumbass
youre looking for 7.1 on a THX headset
erm
ignore this
your
not
forced to pay
for surround sound
check email again
also TRY installing synapse and see if the THX options pop up
use the charger cable
no you FUCKING WONT
Hey I have question
I received my Razer Deathadder v2 pro today. when I plug the dongle, windows starts plug/unplug sound in loop so it does not work. It works when connected via the included USB cable.
When i use the utility to connect it says just loops in there as well between plugged in and not plugged in.
How can I fix this someone have the same problem?
Yoo soo has anyone bootloader ever went down the toilet and you were in the boot loop? And windows even in a VM won’t work cause the boot loader need a cd and your Razer blade14 doesn’t have a cd port nor drive
Garuda Linux basically saved my laptop 💻
I need some help picking parts for a pc build
I have no idea what I’m doing
I’m aiming for about 1-1.5k$
What games you wanna play?(competitive, single player etc.) What resolution you wanna play? How many Hz you want in your monitor for a specific competitive game?(if you wanna play a competitive game)
May I ask what country do you live?
Canada
Ok
I’m going to order off Amazon
Why?
Only if is components and not a pre-built pc, cuz pre-builts are bad, and on amazon you probably will pay more than you would normally
I’m going to build it, but like the only places I have near me to get the stuff would be like Costco, Best Buy, and London drugs
Cisco has good monitors where I am
Do you have a monitor? Or are you using mobile/laptop?
So you need a new monitor too
Or everything in general if you don't have
What games you gonna play?
Part List - AMD Ryzen 5 8400F, GeForce RTX 4060 Ti, Deepcool CC560 V2 ATX Mid Tower
If you can afford a 1.5k buy that
The problem is that Idk if you have peripherals, monitor etc.
@frozen laurel
K
I am starting from nothing but a good keyboard and mouse and some other little things
Oh
Mouse and keyboard brands recommended: Razer, Steelseries, Hyperx and Logitech
I have a razer cornata v2 and a roccat 120 aimo
Why do u have two keyboards
I thought u didn't, sorry
No the razer keyboard and roccat mouse
Anyway thanks
Yw
I’ll save that
Okok
The beautiful case i have been looking at for like 2 months now has finally arrived!
Cool
anyone got an idea why my barracuda x 2022 mercury that I bought yesterday is "broken"? the mic doesn't work and I cannot use the pairing utility it doesn't detect the dongle
Is very cool
nice, what name?
The Okinos Aqua 7
Thank you
Hi
can someone help me real quick?
My mouse is
Razer basilisk ultimate
I lost the dongle, so im using a usb
but i lost that one too lol
so i got a different usb
i like cut it a little so it can fit in the area where you plug it in
it takes power, but doesnt work
like it lights up
U must buy theyre USB i think
Or maybe u must have to use a wire with data transfer function not only for charge
this is also what i thought
The first wire wasnt razer, and it worked perfectly
My new case (in the back) vs the old case (in the front). The old case still has the stuff in it.
can someone help me with my headset (blacksharkv2 hyperspeed)
im using it but it's useless
I think the case is on chroma, idk either
Alle meine Razer Produkte die ich in meinem Set-up habe!
XD Nur gut, das ich nix von Razer besitze, hihi, Spaß, ich bin ein riesen Fan.
03.- Razer Kunai Chroma - Fans aRGB -Hochleistungslüfter 5x 140mm (nachgerüstete)
04.- Razer Kunai Chroma - Fans aRGB -Hochleistungslüfter 1x 120mm (nachgerüstete)
06.- AsRock X570 Taichi Razer Edition For Gamers. By Gamers (RGB Gaming Motherboard) (F1M0XB101647)
01.- Razer Goliathus Extended Chroma USB Gaming-Mouse-Mat (Model No.: RZ02-025003)
02.- Razer Cynosa Chroma USB Gaming-Keyboard (Model No.: RZ03-0226)
03.- Razer Basilisk V3 Chroma - Kabelgebundene Gaming-Maus (Model No.: RZ01-0400)
04.- Razer Tartarus V2 Chroma USB Gaming-Keypad (Model No.: RZ07-0227)
05.- Razer Wolverine V2 Chroma Controller (Model No.: RZ06-04010)
06.- Razer Universal Quick Charging Stand for Xbox 20th Anniversary Limited Edition (Model No.: RC21-01750)
07.- Razer Kraken V3 Chroma USB - THX Spatial 7.1 Surround Sound Gaming-Headset (Model No.: RZ04-0377)
08.- Razer Seiren Elite Dynamisches Mikrofon (Model No.: RZ19-0228)
09.- Razer Kiyo Streaming Kamera mit Ring-Beleuchtung (Model No.: RZ19-0232)
10.- Razer Leviathan Dolby 5.1 Surround Sound Soundsystem (Model No.: RZ05-01260100)
11.- Razer Key Light Chroma RGB Key Light für Streaming (Model No.: RZ19-0412)
12.- Razer Base Station Chroma - Headset Ständer mit 3-fach USB Hub (Model No.: RC21-0119)
13.- Razer Mouse Bungee V3 Chroma (Model No.: RC21-0152)
14.- Razer PWM PC Fan Controller PC-Lüftersteuerung (Model No.: RZ34-02140)
15.- Razer Chroma Addressable RGB Controller Kompatibel zu jedem ARGB-Gerät (Model No.: RZ34-02140600-R3M1)
16.- Razer Limited Edition Rasierer, Magnetdock und Reise-Etui für unterwegs, Gillette Labs mit Reinigungs-Element, 1 Griff, 2 Klingen (ASIN: B0CCS4K9NN)
hey all question -- i picked up the leviathan v2 sound bar ( i like it ) but found out after that the subwoofer is only sold as a conbo with the sound bar ) that being said - when i can if i grab the combo set would i be able to add it to the sound bar i have or not ?
Try to contact the Razer support on the site
Hey just a heads up text walls like these constitute as spam most of the time
my razer barracuda x headset cuts in and out on my pc
but when i connect it to my phone it works completely fine
help
a
might be dongle issue?
Surround Sound.
I'm quite sure that surround sound works on BS V2 Pro
I used 2 versions of them already.
If you get into the game and you can tell where the footsteps are. Then surround sound is working.
Check the stereo settings.
Make sure the audio is in stereo (2 channels) not mono (1 channel).
There should be other settings that clearly specify you're either in stereo or mono.
It should be somewhere in mixing settings.
There is another one.
If not, try to reinstall the audio driver.
Also, turn this one on.
Should be in there if I remember it correctly.
Hmm... There should be that one option but I couldn't remember where Microsoft hides it. :oof:
Still, you should reinstall the driver before you look for it just to make sure that you have everything as it should.
If you could, try to swap out the headsets to see if the issue is on the headset or no.
Maybe it has something to do with it being a PS version ig.
My BS v2 Pro both 2020 and 2023 works fine with surround sound.
That could be the reason tho.
Just unmute and stop using the mic completely.
Unfortunately.
It means it hasn't turned off yet.
My theory is that your unit doesn't have 2 separate channels for both audio and mic so they combine it together and it mushes everything.
I didn't have the PS version so I couldn't say much.
Mine was the PC one and they were working fine tho.
I didn't have that issue for the BS.
I did with the Barracuda Pro tho...
I think if you still couldn't fix it... Just return it.
And get another one.
average bluetooth stuff
is it just me or does everyone have mic problems with the razer headsets( especialy the blacksharks)
After i started using nvidia broadcast my mic problems pretty much dissapeared and i have had no issues. One person even said i sounded "too crisp" so it was definitely doing it's job lol
nah i mean that it just doesnt work , like the mic isnt even detected or it works for a bit than stops
Oh I never had that issue. Firmware up to date on your headset?
hmm idk i never checked it might be that , can i update it on razer synapse or is there a website?
My wife at home is stuck at the signon screen with a macro running. We can't figure out which one it is. Is there a way disable the program at the sign on screen?
Hi, I have a Razer Tartarus Chroma that I use with Elite Dangerous. I finally decided to upgrade to the Tartarus V2. I bought it, installed it, set up 3 profiles and was using the Tartarus happily. Only one problem. It did not load automatically on startup. I had to click the synapse icon and then load the tartarus to get it to work. Idea! Contact support and have them help me!
"Uninstall and reinstall". OK, exported my profiles just in case and did that, and installer locks looping this box. So, uninstalled and got the "latest" synapse, synapse4.
"Backwards compatible with Synapse 3 devices." it said. Yay.
Installed it and my profiles are not found. OK, Import my profiles since it's backwards compatible. Guess what. It's not. The software only looks for .synapse4 files. Mine is a .synapse3 file. Hmmm... copy/pasted file and renamed to .synapse4. Nope, still doesn't work.
Contacted support again to get the older synapse3 software. Explained everything to him and his response was "So synapse4 is not seeing your Tartarus, right?" What an idiot! Apparently he did not read my carefully worded message. I had to ask if he was a bot or a person, because a real person could not possibly be that stupid right? Then he tried to patronize me telling me he is a customer too and would be upset... that did it. I am now reloading all 3 of my profiles maually, something that took hours to do initially.
This sucks. Razer support sucks.
it's best if you have more patience communicating w/ Customer Service Representatives, they deal w/ people all day everyday, they make mistakes too. Also, you can easily get Synapse 3 via their website, you could have also just searched "Razer Synapse 3 Download" via Google
please make sure you utilize all of your resources first
That's all I asked of the guy. Where to get Synapse 3. He just couldn't deal ...
...and I got a little upset when your site said Synapse 4 supported Synapse 3. It does not. Why would you not allow a synapse 3 saved profile to load in Synapse 4?
idk, write some feedback on their Feedback option within Synapse
and now it's still not autoloading and the Switch Profile no longer works. Back to Synapse3.
and I did provide feedback. totally useless I'm sure...
hey i need a headset with a mic for about 50usd. recently got the blackshark v2 x after my redragon h350 got stolen but im having problems with it so im returning it and need a new one. any reccomendations?
Does it have to be Razer?
id prefer it if it wasnt actually
Okay
Any company u prefer?
i just wantsomething decent
any company will do
Hyperx Cloud II is pretty decent
hello
depending on your budget and willingness to buy from Amazon warehouse/resale, you can get a good deal on some nice Sennheiser headsets (not all of them are nice of course, I'm just meaning you can find the nice ones for a bit cheaper)
can anyone recommend a good keyboard by razer around $70 and under
I can't get anything on Amazon cuz shipping goes for more than the product sometimes
Yeah I saw some people selling a pair of those and the hyperx cloud stinger 2s I think I'll settle on one of those. Don't know which tho
Pls show me your setup 🫸🫷
it’s messy rn and I want to completely remodel it so every device has a home
But soon
a
does the razer deathadder essential have a macro feature?
I just got the Razer Huntsman v3 Pro, does anyone have any imports for the key actualization and stuff like that? It's all kind of confusing
@trail ingot Why do you have Razer hater as your name?
Did you buy the new models that have not been tested as much as the older products?
Keep in mind that new products are pushed out faster to make them available faster as it takes time to work out the problems.
I've used pretty much all Razer products after 2020.
Only the keyboard and mice survived for more than a year.
The headset and everything else is uhhh...
The fact that you have access to this Discord means that you are the Test Subject for using new products. Welcome to the world to where someone is going to have a hole in his pocket because he can't wait for someone else to be used a Test Tube first. He who can't wait is automatically the Test Subject. That is what Warranty is for so you can get replacement for no extra charge.
Trust me.
You do not want to deal with Razer warranty exchange.
😂😂😂
They are a meme at this point.
Trust me. You don't want me in a relationship outside of this Razer Discord. I would burn a hole in your pocket just for trash talking Razer products. I'm not a real dude. I'm 100% Chicana Latina Razer user from LA home girl.
So let's say if im irl what you gonna do to burn my pocket.

Give me your wallet before I cut off your call list to females that don't support Razer.
Just saying. You don't want me.
You remove Razer hater name and I won't look for your wallet under your pillow.
Your wallet says Razer and that's my name when I show what products I use for gaming.
You enter a conversation with me and that means you just gave away your wallet because you are here to spend money so you can find the problems on new products.
Look at the bright side. You get to talk to a girl for free of no extra charge and that is worth more than your wallet cause you only have 1 dollar that won't even pay for a single Chicken Fajita at Taco Bell that I work part time at.
😞
I'm sorry. I did not mean to hurt your feelings. You can keep your 1 dollar cause I make more than that on minimum wage.
But I have 2 dollas 🗣️🔥
That is an insult. Mexicans at Home Depot have at least 3 dollars pulling weeds in your front yard.
10 dollars. I'm worth 2 digit number and not a single digit number.
You want 2 dollar Razer support? Move to Mexico City in Mexico.

Hey i dunno if this is a good place to ask this kind of thing, I want to get some new headphones to go with my Razer Mixer, and they need to be 3.5mm jack. The issue is I want my new headphones to be cute. I liked the look of the Kitty Kraken V2 headphones but they only have a USB A cable, and the only jack headphones from razer are not my thing at all. Ive also looked on Logitech, and couldn't find anything nice really.
Black, Purple, Green are colours I rather like for headphones, and they have to be over ear cups. If anyone has some suggestions please let me know
v4 pro has 3.5mm
expensive tho
yeah £400 is a bit too much to excuse for me, especially since I actually dont like the look of these in comparison to the other headphones id get if I wasnt restricted to 3.5mm sadly
i think the black shark lineup has 3.5mm too
this one is
barracuda x also supports 3.5mm
hmm maybe. Is the mic detachable actually?
no
dang
its not very common
well its still nice, I just dont actually need the mic since I use an xlr mic. (reason I have this mixer actually plus console games)
the Barracuda X you suggested has detachable also so ill compare the two
Thank you for the recommendations
Kraken V3 Pro has an analog connection too btw
those are cheaper and usually on sale
i have a question is there any switches that are rapid trigger 0.1 actuation point out of the box? or any software where i can customize it cause i wanna build a keyboard but have it be fast
Razers gen 2 analog board switches do
You need to adjust in synapse
you're looking for magnetic switches. are you looking for 0.1mm actuation point or reset point?
I don't think you want 0.1mm actuation, resting a finger on a key could activate it
there's a lot of different magnetic switches
something like lekker switches are probably what you're looking for
i was thinking of getting fuji hall effect switches
I'm unsure of what software options you'll have tho, idk if there's an open source option that lets you fiddle with actuation points and whatnot
i don’t really know what im looking for my first time building a keyboard
the whole adjusting actuation point and shit is in software
I know wooting has a utility, but like the others, it only works with their stuff
I think monsgeek has something but I haven't looked at it much
there's probably some GitHub project
can always ask around in a dedicated keyboard community
I would just advise against getting a razer keyboard, because I think they're hilariously overpriced for what they are
Anyone have any recommendations for fast reaction times with little lag when it comes to mouse, keyboard and controller? I wanna upgrade but not sure what to get since I hame fps a lot
To note I have about 200$ to upgrade everything so that's unfortunately what I have
for controller, I recommend either Gamesir t4k or 8bitdo ultimate 2c. ultimate 2c has the best response times on the market if you use the wireless dongle.
That would fix the wore jump the controller I deal with now
for keyboard, if you want good latency, go wired. latency difference between pretty much every wired keyboard will be very very similar (for actually decent keyboards- e-waste keyboards and trash tier keyboards might have worse latency). what matters more is the actual feel of the keyboard, and switch type. there's lots of options that can be good.
if you're not sure what you're looking for, unfortunately you won't really know until you've used one for a while and figure out what you do and don't like
I'm not a mouse nerd so idk about that
I'm looking for a slick quieter keyboard. Not something hugely bulky
do you know what size format you want? (like 100%, 75%, 60%, 45%, etc?)
I need a full keyboard setup with keypad on the side. I do a lot of work on it since I wrote in my side time
do you want it to be mechanical or membrane? idk about membrane keyboards, so I wouldn't have any recommendations
mechanical is always gonna have a little noise, even from the keycaps
Mechanical. Membrane is off to me. If it's only a little noise that's fine just not deafening noise. Trying to get a quieter setup so my roommates don't hear it at night
any other features you're looking for?
right now I'm looking at keychron and royal kludge stuff, just because I like those brands and they offer hot swappable keyboards
the problem is that even if the switches are quiet, mechanical keycaps aren't, so a some of the noise will depend on how hard you're hitting the key and the acoustics of the room
I'm not sure how loud is too loud
I don't want to recommend an expensive keyboard and not leave you with enough for a mouse
also since you didn't specify country, I'm assuming USA because you used dollars. if you're not in the USA, idk what the pricing is in your country.
with red switches, these should both average 45db while typing. unsure if that's too loud for you or not.
https://www.keychron.com/products/keychron-v5-qmk-custom-mechanical-keyboard
https://www.keychron.com/products/keychron-v6-qmk-custom-mechanical-keyboard
The fully assembled version includes: ABS plastic housing The keyboard PCB, screw-in stabs, and the steel plate Double-shot OSA PBT keycaps (including Mac & Windows keycaps) Keychron K Pro switches The barebone version does not include the keycaps and switches.No discount codes can be used for V5. Please drop your
The fully assembled version includes: ABS plastic housing The keyboard PCB, screw-in stabs, and the steel plate Double-shot OSA PBT keycaps (including Mac & Windows keycaps) Keychron K Pro switches The barebone version does not include the keycaps and switches.No discount codes can be used for V6. Please drop your
this is also an option, unsure of how loud it is
https://www.amazon.com/Keychron-Mechanical-Keyboard-Hot-swappable-Backlight/dp/B08CN9LVT4/ref=mp_s_a_1_3
lol i did this with my 1st keyboard and it was a 60 i just thought razer= good
yeah, there seems to be a weird thing with people thinking razer = good
razer = overpriced
99% of the time
their like $30-$50 headsets are fine, although unimpressive. if you're a console gamer, whatever.
if you're dropping $400 on a razer headset... chief, you can get a pair of some of the best headphones on the market and either a modmic or standalone mic for like $100-$200 less
which will be WAY better quality for both he headphones and mic
their keyboards are fine, just overpriced. I feel like they'd be awesome if they were priced lower
their mice are... fine? especially on sale, I have nothing against razer mice
the siren x mini or whatever their mic is called is also fine, but overpriced now
I feel like part of this is that razer priced their stuff like 8 years ago now, and their prices were competitive then. now there's so much competition that's better quality for less money that razer just looks kinda ridiculous
the keyboard and microphone space especially are super competitive now
Ayyyy, so I have a Razer Leviathan V2 X, but the USB-C cable is defective or stopped working. Razer can't replace it because they have no inventory.
What USB-C cable should I use for it? Should it be rated for a certain wattage?
Been using the DeathAdder V3 for about a year now. Only recently I started noticing it will stutter about once every minute for a split second. Pretty irritating when playing MP shooter games. Anyone experiencing this issue and/or know of a fix?
Do you guys know of any mice similar to the basilisk v3 but longer?
I hold mice weird and my fingers go over the front of the mouse
Anyone know; i updated my win10(64b) , and now it will not see camera. I unplugged my Kiyo and replug it in, ues it, but when i use it, and vanishes. Windo10 see no cameras, and just a error.. ran thro the removing driver/camera/software. but repeats. google and did all the fixes, but nothing. about to the point for formatting Mdot and reinsatll windows. lol
can someone help me i have a huntsman mini and im trying to download the analog for it. it tells me to plug it in even tho its already plugged in what can i do?
whats a fast switch for custom keyboards
Does anyone here own the Blackwidow V4 Pro and ever have an issue with keys not registering?
https://cololight.com/pages/introducing-colo-gcs?customer_posted=true&sfnsn=mo#contact_form. Interesting
wdym by fast
like actuation or reset point?
i do nit know the difference
your main options would either be speed switches (from kailh or cherry) or magnetic (hall effect) switches, there's lots of options for those
actuation is how much force/travel of the key is needed before it registers as an input, reset is the point when releasing at which it will register as a new input if you press down again
tldr: actuation is how far down it needs to go before it activates, reset is how far up it needs to go before you can activate it again
too low of an actuation point can lead to a lot of accidental presses in my experience
which one would you personally pick
there's also different styles of switch, linear and tactile are the main ones. linear is a clean press all the way down, tactile has a "bump" or a point where more force is needed, so you can physically feel the actuation point. some people like that, some don't
personally, I'm a fan of clicky switches, which are tactile switches that make a clicky sound. I've found that I like kailh speed gold and pink quite a lot, although that's completely down to preference, because I like clicky switches.
mmm
a "faster" switch isn't necessarily better, because if you're accidentally pressing keys a lot, it doesn't help you. some people LOVE switches with super low actuation points, some don't
some people LOVE linear switches and hate clicky, and vice versa
unfortunately a lot of it is down to preference, there's no real wrong answers. the best case scenario is that you find a switch that you're comfortable using
there's graphs that can show your the actuation and reset points, but if you're not familiar with that type of graph they might be a little weird to look at at first
(also something I said earlier is wrong- not all tactile/clicky switches have the actuation and pressure bump in the same spot, a lot are either synced or right after the bump though)
if you're just looking for the fastest switch on the market, look at magnetic switches. some keyboards have software that you can use to adjust the actuation and reset points on the magnetic switches, which is cool
Yah
You just need to clean the keyboard and lower the polling rate
I'm not sure what version I had, but I've gone through 2 blackwidows where some the keys have stopped working. Sometimes intermittently sometimes altogether.
I need help with pairing my Razer Cobra Pro to the Razer mouse dock pro, If ANYONE knows anything or can assist me i would be very thankful
hey guys i have the razer nommo v2 speakers and for some reason they always completely disconnect from my pc unless i’m actively playing music through them, if no sound is being played they get disconnected and i have to manually disconnect and reconnect the cables, anyone know the fix?
had this issue start yesterday, I dont get rough or throw my mouse around so I dont know how the scroll wheel could mess up like that
i ended up following a youtube tutorial and i took it apart but i cant get this one piece off
unfixable unless im willing to break an allen wrench and glue it to the inside of the hex that the scroll is attached to
gotta buy a new one
YUCK !!
why does the PCB look like that
i thought it was in a matte black finish :(
Hi i was wondering if there was any way to get the schematics of my blackwidow v4 pro. I was desoldwring some switches bc some were faulty and i ended up getting the solder pad off and now i need to run a jumper to the trace for the key to work
does opening/taking apart of v2 pro voids warranty?
scroll wheel acting up just want to clean with 99% alcohol
Any modification or damage voids warranty.
ah okok not same with the razer keebs
razer keebs have the same policy i think
wil i still get giveaway rewared if in living in india
no
hi so i recently bought the orochi v2 and whenever i use my 2.4 wifi it would weaken it and then disconnect my laptop from the internet, i looked around and i see people had the same issue 4/2 years ago and its annoying that it still happening. Does anyone know how to fix this issue?
you could try changing your WiFi channel
2.4GHz is likely interfering with your WiFi
WiFi uses 2.4, your dongle uses 2.4
how do i change my wifi channel?
is changing my wifi channel switching to a 5g network?
but why does this happen only on razer products tho
One message removed from a suspended account.
i own a razer kraken v3 and it makes this weird crackling/glitching sound every 15ish minutes
it has since i bought it
i’ve scoured the internet but no one seems to have had the same issue
it’s plugged directly into my pc with a usb-a cable
it's either your PC or the headphones. does it happen on other devices, or just your PC? have you tried other headphones on your PC, does it happen with other headphones as well?
i haven’t tried it with any other device
also, is it front panel or back panel USB? could potentially be interference being weird
it could be a lot of things
assuming front panel is ontop of the case and back panel is next to the power supply?
yeah
front panel
try with back panel
ah
try the headphones on a laptop or a different PC or something and see if it still makes the noise. if so, it's the headphones
otherwise it most likely could be an audio driver on your PC being weird, interference on the USB port, or potential signal integrity issues on the port, either from damage or just from the factory
alright
Watch the special GIGABYTE Event and discover how we empower the AI generation with our cutting-edge AI TOP 2.0 solution for local AI model training. Be among the first to experience the latest-gen Z890 and X870 motherboards, packed with revolutionary features, including DIY-friendly designs and AI-driven innovations that will redefine the futur...
try turning off the EQ and 7.1 effects and see if it happens, the EQ that automatically applies for the razer 7.1 application was causing occasional audio clipping for me, which sounded like crackling and glitching
it could be a lot of things, there's a lot to try
i’ll check google
thanks for the help though, i’ll go through everything tomorrow and see what happens
I'm not sure, I've only used the razer 7.1 software
there should be a way to turn the EQ off in the razer eq app tho
yeah
to be clear I mean the one that doesn't have an eq menu at all, although confusingly it definitely applies an eq profile if you turn the effect on. I know the THX 7.1 version of the software does have an eq menu, and I think synapse 3 also has an EQ menu if your headset supports it or something? just whatever you're using for EQ
try turning it off
it’s 2:35 am for me rn 😭 ill have to wait
Are you powered by OpenAI
WHY DO PEOPLE KEEP ASKING IF I'M AI 😭
Guess
idk
its not
should I use less words?
when was razer made
is that the issue?
no no
the issue is just uhh
idk how to explain it
you had to google that right
yes
okay good
are you sure you have never had an elon musk chip inserted in your brain>
I knew they had a ball mouse as one of their early products, so it had to be early 2000s, I didn't know what specific year tho
boomslang I think it was called
nice
as far as I am aware, no, and if there was, I'm kinda pissed that it doesn't affect my math skills
if that chip could do algebra for me it'd be goated
so real
math is my weakness
science and stem topics are so cool, unfortunately it's all applied math
I suck balls at math
I can't memorize the formulas fast enough for the pace of the classes
just like uhh buy those 1000 pound glasses that have ai built into them
it works

do you know any good razer keyboards
I'm a razer keyboard hater
personally
so no
any other keyboards?
depends on what specifically you're looking for, but yes. I'm definitely not an expert, but from personal experience I quite like a couple keychron models and some royal kludge models for the price
personally I like having hot swappable switches
and I specifically wanted to keep my function keys
so the rk84 was perfect for me. hot swappable, RGB, two wireless modes, and wired (although I always use it wired because the latency is better)
some razer keyboards do have the adjustable actuation point, although I believe wooting offers the same thing on some models with more features
AK820 Max HE
Got it for like $86. Has everything you could expect from a custom keyboard and rapid trigger.
I also de-Rezer my setup just lately.
Does This channel belong to digital or hardware t ot both
Can someone give me a good 70 -100% keyboard from Steelseries, razer, Hyper x or Logitech.
RGB
From 100 - 250$
If wireless has to have USB reciever not bluetooth and from 2020 - recent date.
Anyone who can help?
https://www.ayaneo.com/goods/8872322105589?utm_source=brevo&utm_campaign=ag01&utm_medium=email&utm_id=122. Steam deck razer edge hmm
Founded in 2020, AYANEO is a revolutionary brand for portable gaming consoles. Our team consists of passionate gamers and tech-savvy experts who want to provide gamers with the most advanced and up-to-date gaming experiences. We’ve developed a line of powerful and portable gaming handhelds, with the latest Windows operating system and the latest...
HJ
Hi. Not sure if it is the right place to ask this question.
Some time before I bought Razer Opus and discovered that when I use Bluetooth connection and Discord the sound quality becomes awful.
I found an article in Discord forum that it is caused by Bluetooth channel limitation (https://support.discord.com/hc/en-us/articles/19850083499159--Known-Issue-Audio-Quality-Drops-When-Joining-A-Call).
I want to ask are there Razer wireless headsets that dont have this issue?
mobile or PC?
PC
https://pcpartpicker.com/list/TFFxZJ decent pc build?
Part List - Intel Core i9-12900K, GeForce RTX 4060, Montech XR ATX Mid Tower
Gaming, editing, and content creation
Just asking for this build
I could go higherbut I don’t have a full time job atm so I probably wouldn’t
Oof 1) my PC cost me $3k
wsup
I just have my first pc and i dont know if this temperatures are ok or not, I have all apps and programs closed
are they good?
I also have liquid refrigeration
Hi. I have a question. So I bought a razer ornata v3 tenkeyless keyboard and a razer balisik v3 mouse both for my macbook to work at home and installed razer macos to be able to customize the rgb lights. The app recognizes the mouse and I'm able to customize the lights with no problems, however, it dosen't recognize the keyboard. Does anyone know why?
idk if I'm too late, but I'd rate it as bad. poorly balanced budget, weird CPU choice. there's better SSDs for cheaper as well, plus the CPU cooler is overpriced.
idle temps don't really matter much, because at low heat loads, a lot of coolers by default have a fan curve optimized to stay quiet. if you're staying at or below 94c on the CPU and at or below 85c (although the hotspot can go above 100c and be fine) on the GPU, you'll be okay
sorry that was meant to be a react message originally, and wasn't
well even then it's poorly balanced, a better GPU will give leagues better performance for gaming, streaming, and content creation, like editing
CPU does matter, it's just that the 12900k is an odd choice, especially when the 12700k is a SIGNIFICANTLY better value
ehh It's just not needed by 90% of people
xeon and threadripper are worse for gaming anyway
most people don't even need 8 cores
I mean a Ryzen 7500f beats a 12900k for like $125
this would give you almost double the GPU performance
https://pcpartpicker.com/list/K24WYN
Part List - GeForce RTX 4070 SUPER, Montech XR ATX Mid Tower
and the CPU is slightly better, like consistently 1-5% better, at least in gaming
less cores and threads, which might impact render times for editing, although having a WAY more powerful GPU should make up for that
the SSD is also much faster, and is TLC instead of QLC
@prime osprey if you want to see just how much better the 4070 super is, watch this
https://youtu.be/mL1l4jmxLa8?si=vT-ZuwjPpDE48oMj
This review of the NVIDIA RTX 4070 Super includes benchmarks vs. the RTX 4070 (original), RTX 4070 Ti, RTX 4080, 3070, 2070, and AMD cards like the RX 6800 XT, RX 7800 XT, 7900 XT, and more. Testing looks at a mix of rasterization performance in gaming, ray tracing performance (including DLSS and FSR), and end-to-end system latency performance a...
more cores ≠ more fps
the quadro isn't a gaming card and won't perform better than a 4090 in gaming
wdym by that
okay but wdym by "trash i/o"
also what does this have to do with anything? Intel has been competitive, just not in terms of pricing
a 7500f offers significantly better value for the workload specified than 12900k
the only panels hitting those response times are OLED panels
????
no?
OLED is literally the best monitor type for gaming
0.03ms response times
perfect inky blacks
near perfect motion rendering
no???
wtf are you talking about 😭
it doesn't force cap your frames
also what
as a hardware enthusiast, being an esports player in no way means you know what you're talking about
in what way????
betting on what
find me an IPS panel with 0.01ms response times
I'm saying there isn't one
pixel response times are mostly marketing anyway, but regardless OLED wins
better motion clarity than IPS
without the drawbacks of IPS having shitty contrast and black levels
what question 😭
benq isn't no name???
that was a question to you???
you were saying IPS panels hit those response times
because you're talking out of your ass?
literally it doesn't exist
I'm trying to figure out what the fuck you're talking about
I think you misunderstand
they aren't facts, that's the problem
because you haven't said any facts or given any sources
I'm genuinely trying to understand what you mean by this
benq isn't no name
how is benq relevant here
you keep just saying benq
a brand
monitors
okay so how are they a no name?
what facts 😭
are you like high or is English not your first language or something? like I'm not tryna be rude but you're not making sense
are you copy pasting from chatgpt?
what the fuck are you talking about
genuinely
WHAT DO YOU MEAN BY TRASH I/O
it stands for input/output
how is that relevant????
USB, display port, thunderbolt, and HDMI run on regulated standard bandwidths
what do you mean by this
is that an actual question or like
a copy paste from chatgpt
that link doesn't work
are you copy pasting from chatgpt?
what
do you understand the differences between panel types
it can't
there is not an IPS monitor on the market that hits 0.01ms
send me literally any proof at all
you just keep insulting me
you're the one typing in broken English?
you have not sent any proof whatsoever
you have only insulted me
which isn't proof
I'm tired of misinformation and insults ngl
@rocky rivet how this shit work
you haven't helped?
all you've done is insult me and make blatantly false claims
no, I want a source, as in proof from a reliable and trustworthy place of information
@dire peak please refrain from attacking other members or you will be placed on a timeout
Done!
I'd say please leave the situation, do not continue.
will do
Alright.
i can delete all of my messages to reduce clutter if u want
can someone help me, when i bind a macro on synapse to my scroll click, it works but then usually doesn't. Does anyone know why?
The main point is I don’t want to sacrifice my other parts for a $ 500–600 gpu
Hello, is anyone having issues with the mouse freezing?
the only parts that got downgraded are the CPU and motherboard. the CPU is still very powerful, and this configuration would give you the most performance for your money, assuming your budget is around $1200 USD
well actually the CPU isn't a downgrade for gaming in most games
regardless you'll get significantly more fps with a better GPU than a better CPU
dont know if this counts as tech but my razer deathadder essentials scrollwheel is making a weird noise, had this mouse for about a half of yea
have you tried blowing it out with filtered compressed air?
I see why you paid what you did. Nice.
https://pizzahutpizzawarmer.ca/ new technology for Playstation 5 nice
pretty decent 👍
I Just bought a nammo v2 pro and then lights are not working I'm not using the subwoofer do I need that just for the lights to work? and the control pad is not working either not adjusting the volume when I do rotate it
which is better superlight or viper
do you want a superlight mouse? I don't think razer makes a superlight, so it heavily depends on what superlight mouse you're looking at
and which viper?
well I guess technically some of their mice are considered superlight? I think the v3 pro would be considered superlight
I think the cutoff is technically just lower than 80g, but I don't think that's what you meant
it depends, I still use the Viper V2 pro because I can use claw or palm or even hybrid pretty comfortably for aiming, but if you play anything else and just want to use palm and be comfortable then I would pick the Viper V3 pro
picking the correct shape for you is the most important
Yeah, that's why I still use the Viper V2 pro
personally I use the naga v2 hyperspeed and am happy, you don't need a crazy sensor or anything. like keyboards, you kinda need to know what you're looking for first. there isn't really a "one size fits all" or objective best for everyone.
I guess technically you could put the mouse with the best latency and sensor accuracy as the best, but if it's uncomfortable af I'm still gonna suck with it
i still have no idea what to pick
im gonna pick the one that doesnt destroy my wallet
That's rule number 1 in buying anything

nice!
the cpu isnt for gaming its for editing
i prioritize editing over gaming
what software?
13600k matches/beats 12900k in the adobe suite
adobe but as of recently 13th and 14th gen i9 have been crashig
are you talking about the microcode issues? they issued a fix for that a while ago
it wasn't crashing either
oh really
it was silicon degradation caused by improper power management, which yes, did cause crashing at first, and then lead to the CPU dying
the dying was the big issue
the main reason i have 12th gen not 13 or 14th is because of pric
13600k is like $200 usd
I actually also thought it was higher, it's been hovering around $250-$300
it's $205 on Amazon rn tho
and the k version is cheaper than kf, which is nice
integrated graphics are always nice to have
I will correct myself. the update has been out for a while, although the actual implementation of it was up to motherboard manufacturers, and the fix was issues through a bios update. different manufacturers released their updates at different times, some as late as September. as far as I am aware, all boards from the major manufacturers do have an updated bios out now
my other recommendations stand. consider this if you want, I know it's $150 more than your initial build. I think the extra graphics card performance is worth it personally, but that's up to you to decide.
https://pcpartpicker.com/list/7pY3cH
something else that could also be viable is buying a used card, if you're okay with that. there's good options like used 3080s for around $400, which will be a lot more performant than a 4060.
Part List - Intel Core i5-13600K, GeForce RTX 4070 SUPER, Montech XR ATX Mid Tower
could also go for a normal 4070, about 16% less performance for 16% cheaper
https://pcpartpicker.com/list/Wcswt7
Part List - Intel Core i5-13600K, GeForce RTX 4070, Montech XR ATX Mid Tower
which is a lot closer to your original price
the thing is, i have a laptop with a i5 12th gen and ive researched 13th gen and i do believe that for editing and graphic design, a i9 12th gen would do a lot better
gaming is just a side job for my pc
main reason is for editing and design
an i5 13th gen would be better for gaming
it would depend on your specific workflow and what you do, which you obviously would know better than me. finding benchmarks for it is a bit weird. pugetbench places 12900k ahead for "multi core" by about 10%, but for their in house tests have 13600k placed slightly above 12900k in "overall" for premiere pro. in Photoshop, 13600k wins because it has faster IPC, and Photoshop is essentially single threaded. techpowerups benchmarks for it are weird, so idk what to make of them.
unfortunately pugetbench stopped doing their live playback benchmarks, because they couldn't get consistent results
if I'm not stupid, premiere pro does make use of GPU acceleration, so a better GPU could be nice to have
especially for live playback
I know real time playback on aftereffects can be affected pretty heavily by memory bus
which is pretty bad on a 4060
so a 3060 might actually be an upgrade for you there
although I'm not that informed about how adobe makes use of certain features, so I'm probably missing something that the 40 series has to offer
if you're worried about real time playback, a better GPU is worth it for you over a slight CPU win imo
idk what you're worried about the most for Adobe shit, and I'm not an expert, so I don't want to quantify something as better if it's not better for you specifically
i9 12th would be better than i5 13th for workload for sure
Uhhh XD how’d this happen?
your save data got corrupted, it happens
Buy a good GPU.
Pretty much a lot of software uses GPU Accel already.
And it reduces shittons of time when you use it.
So it's better to just buy a middle tier CPU and invest in a good GPU.
Because middle tier CPUs nowadays are so damn good you shouldn't even care much about it tbh.
I still really strongly recommend a better GPU, the 4060 is decent, but the severely cut memory bandwidth and overall lack of power will be noticeable if you're trying to do live playback in aftereffects and premiere pro
it's not much different from a 3060 for gaming, but for productivity I think the 3060 wins
but with how close the 13600k is, you'd be better off sacrificing <10% CPU performance for nearly double the GPU power
export times are on the GPU, but that's not that big of a deal for most people. 4070 will have much better export time tho.
I started to hate the Razer Huntsman V3 Pro. The reason is that the switches started to fail one after the other, even though it has not completed one year. Is there a radical solution?
Thats so bad
the solution is to either replace the switches or stop buying razer products
is there any major difference between the Razer DeathAdder V3 vs Razer DeathAdder Essential?
They are hugely different
V3 has way better switches and sensor
ok i have another question
I've owned 2 different Razer DeathAdder Essential's and they both have had the problem with the scroll wheel jumping. This is something I dont really know how to fix as I dont know if its something that even is fixable. Would you say it would be better to try my luck and buy a Razer DeathAdder V3 or just go to a different brand entirely?
Apparently the scroll wheel on the Deathadder essential is like… not the greatest. And is prone to failure. V3 is much better
ok thank you so much
this is legit my 2nd one thats needed replacing just because of the scroll wheel
the only solutions ive found to this is legit pressing onto the scroll wheel until it stops jumping 💀
which ive been doing because it works 💀 but now ive done it so much to the point where the scroll wheel just doesnt scroll anymore
Yea I’d give the v3 a try. That is rated for wayyyy more clicks and stuff
Because better, newer switches
thank you so much
i really really like the deathadder series and didnt really wanna switch
but if the v3 is much better like you say it is i'll give it a try
is it better to order products through the official store or does it make no difference if you were to order it through amazon?
Guys, how can I tell the difference between the 2020 Razer BlackShark V2 Pro and the 2023 Razer BlackShark V2 Pro? Or is there only the latest model left on the official website?
I believe the 2023 version is usbc
and should be advertised with "70 hours of battery life"
so check if it's USB c
don't support companies that make low quality products, you can get modular products of the same or higher quality for cheaper
hot swap keyboards especially are nice, no soldering needed
hey i want to clean my keyboard but i dont know if the keys are able to come off does anyone know if the razer huntsman elite's keys are detachable?
defective, contact razer support
they are
keycaps should just slide off if you pull up
oh wow they legit just come right off even without a key cap puller
sweet
I hate when they fall off to easy
Should I buy the Raxer BlackShark V2 HyperSpeed or the Raxer BlackShark V2 Pro (2023)? I just heard that the Pro version has poor quality plastic and breaks after a couple of months after purchase
chat what is the best razer mouse in your opinion ?
Best in my opinion is either the Naga V2 Pro or both Basilisk V3 Pros
ya thats fair i dont really like how easy they come off but now i know i can clean my keyboard
What is the quietest keyboard model?
From razer? probably the Deathstalker v2 pro/TKL red switch. Quietest I’ve used
is the only difference between huntsman v3 and v2 the adjustable actuation?
I have difficulty choosing among Razer keyboards, I was only able to test the Ornata model in a store
I believe the main difference is the switch type. v2 uses linear optical switches I believe, v3 uses hall effect switches, which is how they're adjustable
ah okay thank you
linear or clicky right depending on which i pick
if thats the only difference ill probably just go for the cheaper v2
yes, apologies, linear or clicky depending
I'd recommend looking at other brands like keychron and royal kludge as well, they offer good products for cheaper
but yes, I believe that's the main difference between the v2 and v3
ah i understand
someone correct me if I'm wrong
its just i really like the feel of my current huntsman elite which i believe is the model before the v2
the issue is it is very old and im having issues iwth the key rollover
i also found a really good deal on the v2
fair enough, stick with what you like
thanks for the help
when you say cheaper what kinda price range are you talking?
depends on exactly what you want, but from around $50-$150+ (big range, I know, there's a lot of options)
I do recommend sticking with something that you're comfortable with, that's very important imo
if you like the feel of razer switches, keep using them
Ah okay thanks
For something of similar quality to the huntsman im looking at do you have a more specific range?
Also I'm assuming this is USD
they're hall effect?
aren't they analog based on optical
the ones in the v3 are I believe
i don't think they are but i'll look it up again
yeah they're analog opticals
Is there any tech savvy person in here that can help me figure out why my game keeps crashing 🤲🏻
I mean i'm not the best but i could try
What's the game
Sims 4
Any error code on crash?
Lemme see rq

