#Unable to connect to MQTT in Home Assistant due to port issues

1 messages · Page 1 of 1 (latest)

dull sail
#

OK. So that error page is showing that Home Assistant has had an error and has returned that error to Cloudflare. That means that there's an issue on the Home Assistant side, not with Cloudflare.
[2:25 PM]
You should check the Home Assistant debug logs (Settings on sidebar -> System -> Logs) which will show more details. (edited)

1

You should check the Home Assistant debug logs (Settings on sidebar -> System -> Logs) which will show more details. (edited)

#

on looking at the logs it seems it is this causing issues but no clue how to fix it?

granite pier
#

Couldn't identify from logs: Do you have mqtt broker (mqtt server) installed and running?

#

like mosquitto broker or similar?

dull sail
#

I'm even struggling to get ZHA to detect new devices one sec then can the next they won't detect! Like now with a Aqara its not detecting yet other day it did after 3 days!

#

something is really buggy on my Ha

#

I have Mosquitto broker
Current version: 6.4.0

dull sail
dull sail
pulsar peak
#

Please share your config.

#

Serial port is definitely not 1883, btw.

dull sail
pulsar peak
dull sail
#

no good me looking at the docs i get confused with them is also say 1883 there too on port

#

im visual at seeing things not reading them my impairments!

#

you say its not that port so how do i find out what port I need to use

pulsar peak
#

See link.

dull sail
#

i keep looking at the videos and none of them seem the same as mine! why do i have socat in the configuration and do i need a user to get this running for myself?

#

Im totaly confused on it all! nothing is making sence

pulsar peak
#

I'm not sure what to tell you.

dull sail
#

how do i find a zigbee stick when its a Sonoff E dongel for the port? I can see port in hardware but no clue on what im really looking for

#

ive no clues what to ask! 🙂

pulsar peak
#

The E donge is a poor choice for Z2M. The link has docs on how to do exactly that.

dull sail
#

what seems wrong to you why my setup is not running

waxen bronzeBOT
#
Hardware

Open your Home Assistant instance and show hardware information

pulsar peak
#

This might also show it.

dull sail
#

well i was told to use that one

#

other wise I would not o fbought 2 of them]

pulsar peak
#

By who? The E model only has experimental support.

dull sail
#

by Tinkerer

pulsar peak
#

Do you have a link to that?

dull sail
#

no not now was right at the start

pulsar peak
#

🤷

dull sail
#

i kept saying I had tried the P version and sent it right back as it was a waste of time and hes said this is better to use th E version

pulsar peak
#

Maybe you can try to find the message.

dull sail
#

no point find the past its the present I need to fix my setup it'shard work due to it all running and trying to run medical things!🙄

#

i need a clear way to folow to get it all up an drunning smoth and its never been that way

#

i just know teh Sonoff does as its named goes on and off without my permissions!

#

basicly its no good!

#

and yet again a waste of my cash!

#

was a nightmare to flash it never mind get it setup but works fine with ZHA!

#

MQTT Explorer connects too

#

but not MQTT2Zigbee

#

what device do you use?

dull sail
#

even the video to set it up are on the Sonoff E too!

dull sail
# waxen bronze

on looking in the Hardware what I'm I looking for? The dev or a port or the dongle there re many setting in there to be find a needle in it! And then when I do find what Im suppose to be looking for where do I add it?

#

good job im not writing this up in github id of thrown it through the window 🤣

#

I can find the Dongle in the Harware so what info do I need for it for port in the configuration part as I have as far as iam aware done it right but then getting told Iit not a port of 1883

#

is it safe to post my dongle setting on here?

pulsar peak
#

I'd recommend we go back to #zigbee-archived so others can chime in as well. Threads get few views..