#So meanwhile I have separated the 2 4
ember fractal
Channel separation isn't about distance, except in frequency terms
If you use Zigbee 11 and there's WiFi on channel one then your WiFi is stomping all over your Zigbee
sacred yarrow
Ah, misunderstood your question about coordinato's distance the, I guess. Zigbee is on channel 15, so I could try move it to channel 20, but if I got it right, then I need to re-pair every single device?
ember fractal
You would, but have you actually checked for WiFi interference?
sacred yarrow
Wifi is on channel 1, and zigbee 15, so from your graph, zigbee is in a sideband of wifi, I guess
Apart from this, I don't know if there is a way to spot intereferences
ember fractal
ZHA has diagnostics that can provide more
sacred yarrow
OK. I will change the channel and install ZHA instead of deconz. I guess I need to deinstall deconz, to avois a mess ?
ember fractal
No, you don't, but ... deCONZ is rarely recommended anyway
Both ZHA and Zigbee2MQTT are much more actively developed
You could ask the folks on the deCONZ Discord if they have useful diagnostics
sacred yarrow
No, you don't, but ... deCONZ is rarely recommended anyway
OK, I did the migration, seems to work. I am reconnecting devices. The only thing I could not figure out is how to associate a battery powered on/off button with a bulb to be able to control the lamp with the button
ember fractal
Well... what are you using?
sacred yarrow
From home assistant ZHA (sorry for not being clear)
the lamp is from the brand "Bankamp" and the button is from Ikea. With deconz I was able to control the lamp with the button, the association had to be done from within deconz, now I try to have the same association with ZHA
ember fractal
ZHA's docs cover binding, but if you need help ask in #zigbee-archived (since I use Zigbee2MQTT)