#add-ons-archived | Home Assistant | Page 29

frozen nebula Mar 19, 2020, 2:32 AM

#

I definitely changed the username and password.

#

without samba it's rather painful to move files around outside the core config directory (icon sets) check certs etc

#

ok ok ... I had no idea the code on the actual add on page was to be used there ... vs sampe to paste on the configuration yaml. I am back in business!!

placid viper Mar 19, 2020, 10:21 AM

#

trying to setup ssh on a rpi for home assistant

#

but the ssh port is disabled by the looks, how can i fix this?

dense spadeBOT Mar 19, 2020, 10:21 AM

#

@placid viper posted a code wall, it is moved here --> https://paste.ubuntu.com/p/z4YYsKQCWX/

placid viper Mar 19, 2020, 10:22 AM

#

[20:51:30] WARNING: SSH port is disabled. Prevent start of SSH server.

weary stratus Mar 19, 2020, 10:40 AM

#

I've asked this before, but had no change diving into it (sorry @sly kindle for not getting back at you, but thanks for checking up). My problem is, I can't get Samba to work. I've got the installation, configuration, but the logs tell me: "Could not find child # -- ignoring" where the number keeps increasing. My setup is the following:

#

username: homeassistant
password: test123
interface: ''
allow_hosts:
  - 10.0.0.0/8
  - 172.16.0.0/12
  - 192.168.0.0/16
  - 192.168.2.0/24
veto_files:
  - ._*
  - .DS_Store
  - Thumbs.db
  - icon?
  - .Trashes

#

I assume that with this configuration, I can start Samba and the installation starts (so far so good). After a while, the message "Could not find child # -- ignoring" shows up. I can't find my Raspberry Pi in my network, so I still can't access the .yaml-files. Does anyone have any thoughts? I might miss something really basic, but I can't figure it out. Thanks in advance!

placid viper Mar 19, 2020, 11:00 AM

#

nvm, turns out i had to actually enter port 22 into the network options aaaaaa

weary stratus Mar 19, 2020, 11:32 AM

#

I want to use the tor-addon in connection with ssh&webterminal. Seems not to work proberly.
https://imgur.com/a/bvjiQLY
Maybe some hints to improve

wet cove Mar 19, 2020, 2:49 PM

#

i changed the ip address of my Raspberry Pi with HomeAssistant image flashed on it. Now DuckDNS doesn't work anymore. restarting the addon does not help either. how do i solve this? i can still reach it via homeassistant:8123
FIXED: PortForwarding had to be edited as well 🤐

hot radish Mar 19, 2020, 3:10 PM

#

hi all, im having an issue where my pihole log grows and fills my disk

#

-rw-r--r-- 1 systemd-network root 19G Mar 9 15:01 pihole-FTL.db

#

trying to flush logs in pihole using ingress results in this error: Wrong token! Please re-login on the Pi-hole dashboard. - but ingress provides no such functionality

#

is it safe to forcibly rm pihole-FTL.db ?

#

for posterity; seems okay now.

viral jungle Mar 19, 2020, 6:24 PM

#

Hi all,
I start using home assistant on my PI a few days ago. One of the first things I want to use is the AdGuard addon. I think I did everything that is necessary but I still have access to youtube for example when I block it. I am not quite sure about the static ip thing. I applied the config but I am not sure if the dns setting is correct. I configured 192.168.178.1, but when I start the PI the console says: Start DNS port forwarding to 172.30.32.3. Does this belong to each other?
Any idea what could be wrong?

mellow orbit Mar 19, 2020, 7:17 PM

#

Hi all,
Anyone using node-red add-on? Installed from the add-on store and the readme for the project says no configuration necessary, works out the box. I can't get the home assistant nodes to work. Log message is "Node-RED custom integration needs to be installed in Home Assistant for this node to function correctly." Any thought how I do this? or why it's necessary if the node-red add-on is supposed to work out of the box?

mellow orbit Mar 19, 2020, 7:45 PM

#

Sorry, ignore me, just seen this. It's intended behaviour. https://community.home-assistant.io/t/node-red-contrib-home-assistant-websocket/71032/389?u=dcplaya

dire maple Mar 19, 2020, 8:06 PM

#

Anyone here use zwave2mqtt?

neat lily Mar 20, 2020, 12:01 AM

#

Since I upgraded to 0.107.1 (from 0.106.6), my Mosquitto won't start. No logs at all, just won't start. Just me or known error? I googled, but didn't find anything related.
Suggestions?

Edit: Found this in Supervisor logs:
20-03-19 23:50:47 ERROR (SyncWorker_3) [supervisor.docker] Can't start addon_core_mosquitto: 500 Server Error: Internal Server Error ("driver failed programming external connectivity on endpoint addon_core_mosquitto (e3f2f30072ed72c8d753bebbbd832ebc475262aaeb88f3c95f34ce2782a0db20): Error starting userland proxy: listen tcp 0.0.0.0:1883: bind: address already in use")
So suddenly something else decided to use 1883. Interresting..

teal coral Mar 20, 2020, 12:57 AM

#

Hi,
I recently installed the AdGuard add-on and it doesn't appear to do anything. It's tracking and I can see everything that is being filtered via the webUI, but as I navigate to websites ads are still present.
I did what was instructed via AdGuard as followed:
Updated my network DNS in my router settings
Updated that DNS on my Mac, PC and both iOS devices (iPhones)
All these devices have reserved IP addresses
My Pi also has a reserved IP address
Everything is fully updated
I use an Eero mesh system
I'm not sure as to why it tracks everything through the DNS, but it's not actually working while browsing the web.

Any help is greatly appreciated!

viral jungle Mar 20, 2020, 1:31 AM

#

Hi,
I recently installed the AdGuard add-on and it doesn't appear to do anything. It's tracking and I can see everything that is being filtered via the webUI, but as I navigate to websites ads are still present.
I did what was instructed via AdGuard as followed:
Updated my network DNS in my router settings
Updated that DNS on my Mac, PC and both iOS devices (iPhones)
All these devices have reserved IP addresses
My Pi also has a reserved IP address
Everything is fully updated
I use an Eero mesh system
I'm not sure as to why it tracks everything through the DNS, but it's not actually working while browsing the web.

Any help is greatly appreciated!
@teal coral I have the exact some issue!

sly kindle Mar 20, 2020, 1:32 AM

#

@teal coral your devices normally get DNS addresses from the router. You change the router to point to adguard. You don't have to change each individual device.

teal coral Mar 20, 2020, 1:33 AM

#

Yes, someone else told me this. I was only following as instructed by the config by Adguard to do so. I did change this and issue persist

#

Sorry Im new to Home assistant

sly kindle Mar 20, 2020, 1:33 AM

#

adguard instructions do not tell you to do this. I run it

teal coral Mar 20, 2020, 1:34 AM

#

Hmmmm under the settings sections I followed the guide for each type Router, Windows, Mac, iOS etc

sly kindle Mar 20, 2020, 1:34 AM

#

And...you shouldn't run either pi-hole or adguard if you don't understand the concept. It is not a browser extension.

#

I don't know what you mean by each type

#

All you change is on the router, to point to the HA ip address instead of whatever DNS servers were present before.

#

Nothing needs to happen for each device

#

This is not a Home Assistant thing. This is an adguard thing

#

Or a pi-hole thing

#

They block ads by acting as the DNS server for your network.

#

Normally your router handles this.

teal coral Mar 20, 2020, 1:36 AM

#

Again, I'm very new to this and am trying to learn. I only started a few days ago as Im off work due to recent events. I'd love to have more of an understanding and this is a start.

sly kindle Mar 20, 2020, 1:37 AM

#

Yeah, I'm seeing this become user's first addon, and it should probably not be the first

teal coral Mar 20, 2020, 1:38 AM

#

I'm sorry I feel like I have peeved you a bit by my ignorance.

sly kindle Mar 20, 2020, 1:38 AM

#

"I'm brand new! How do I completely screw up my network!" is what I am seeing. 😄

teal coral Mar 20, 2020, 1:38 AM

#

I was not aware of this

sly kindle Mar 20, 2020, 1:38 AM

#

No...I'm not peeved. I just see it constantly

#

and am giving warnings

teal coral Mar 20, 2020, 1:38 AM

#

I did not know this

#

I thought AdGuard was to help block ad traffic on your network. I guess I was mistaken and should stay away from it until I have a better understanding of what it does.

#

Sorry if I struck a nerve. Have a good one.

sly kindle Mar 20, 2020, 1:41 AM

#

@teal coral that's exactly what it is

#

by acting as DNS server

#

and no nerves struck

teal coral Mar 20, 2020, 1:45 AM

#

Well, I'll keep working on other things to get use to and understand HA. I've failed a lot so far, but have also managed to fix a lot of things I've never done or understood before. So this in an interesting project to learn while quarantined. I'll circle back to AdGuard when I have a deeper understanding of its capabilities.

spare ibex Mar 20, 2020, 8:17 AM

#

Any one nows how to install the file browser manually in Home Assistant core (I dont run supervisor or Hass.io)

cyan prawn Mar 20, 2020, 1:12 PM

#

I'm trying to charge over to the mariadb add on. I have not found the directions to put it on an SSD connected drive to my rpi 4. See a lot of questions from others in the forums but did not find any answers. Thanks for any pointers.

flat hedge Mar 20, 2020, 5:08 PM

#

I updated to the most recent version of Hass.io from a way older version. I'm trying to get SAMBA working again. Can anyone point me in the right direction? Which settings have changed for the SAMBA add-on to be able to work from about 1 year ago to now?

#

I'm seeing this in the samba log: INFO: Profiling support unavailable in this build. No builtin backend found, trying to load plugin tdb(/var/lib/samba/registry.tdb): tdb_open_ex: could not open file /var/lib/samba/registry.tdb: No such file or directory daemon_ready: daemon 'smbd' finished starting up and ready to serve connections waiting for connections

flat hedge Mar 20, 2020, 8:06 PM

#

Ok I got SAMBA working but now I'm running into an issue with the MQTT Mosquitto add-on. Are username and passwords necessary?

#

The addon says no

sly kindle Mar 20, 2020, 8:07 PM

#

@flat hedge not if you use HA user credentials on your mqtt client devices to authenticate with the broker

#

you can create a new HA user specifically for this or use an existing one

flat hedge Mar 20, 2020, 8:07 PM

#

OK I will do that but first I need to figure out why the add-on is giving me errors. I rest to defaults

#

What would be a benefit to creating a separate one?

#

my mqtt error log is saying 1584731313: New connection from 192.168.1.159 on port 1883. 1584731313: Socket error on client <unknown>, disconnecting.

#

and [ERROR] Auth error with mqtt

sly kindle Mar 20, 2020, 8:09 PM

#

@flat hedge what device is .159?

flat hedge Mar 20, 2020, 8:09 PM

#

does that mean username and pw? 159 is my htpc

sly kindle Mar 20, 2020, 8:10 PM

#

is your htpc trying to connect to the broker?

flat hedge Mar 20, 2020, 8:11 PM

#

probably. I honestly don't remember setting that up 2 years ago

sly kindle Mar 20, 2020, 8:11 PM

#

it uses mqtt?

flat hedge Mar 20, 2020, 8:11 PM

#

i haven't used Hassio in 1 year I'm trying to fix all the erros after updating

#

I need mqtt for my phone and tablet

sly kindle Mar 20, 2020, 8:11 PM

#

I thought you hadn't updated it in a year. If you haven't been using it in a year, why not start fresh?

flat hedge Mar 20, 2020, 8:12 PM

#

Because I have a massive setup and i figure as painful as it is fixing all these errors, it's probably less time than recreating it all

#

and some of it was a pain like getting the token for my xiaomi vacuum

sly kindle Mar 20, 2020, 8:12 PM

#

and do you need mqtt for your phone and tablet? There are HA apps for android and ios

flat hedge Mar 20, 2020, 8:12 PM

#

Maybe not. That is a good point

#

guess I should get that working

sly kindle Mar 20, 2020, 8:13 PM

#

what other mqtt client devices do you have?

#

tasmota?

flat hedge Mar 20, 2020, 8:13 PM

#

Issue i was running into was I am not https I am still http. Can you point me in the right direction to change that?

#

not at the moment but I may want to in the future

#

which order would you tackle these in?

#

``The following integrations and platforms could not be set up:

weblink
jaoapps_join
googlehome
automation
sensor.coinmarketcap
joaoapps_join
joaoapps_join.notify
sensor.tautulli
camera.ffmpeg
camera.generic
google_assistant
Please check your config.``

molten forge Mar 20, 2020, 8:18 PM

#

Hi guys ! A little question about the node red add-on : how to access to the node-red dashboard when the ingress mode is activated ?
Normally you access to it like that : https://192.168.10.x:1880/endpoint/ui/
But with ingress I don't find a way to display it...

flat hedge Mar 20, 2020, 8:22 PM

#

I'm also trying to configure the wink add-on. I've entered the CLIENT ID and CLIENT SECRET and then it gives me a link to click to auth but when I click it nothing happens and a message says This entity does not have a unique ID, therefore its settings cannot be managed from the UI.

#

How do I assign wink an ID?

sly kindle Mar 20, 2020, 8:23 PM

#

wink addon?

flat hedge Mar 20, 2020, 8:36 PM

#

yeah for the wink hub. It won't authorize when I click the authorization link

sly kindle Mar 20, 2020, 8:42 PM

#

ah the integration...you're using the legacy option?

blissful acorn Mar 20, 2020, 9:48 PM

#

Hello

#

Question.. I have installed the Lets Enrypt addon . I have setup a VM in Proxmox with this addon installed. But how can i setup the certifcates?

#

THe addons says its stored in /data/letsencrypt/live/xxxxxxcom/fullchain.pem

#

But that directory does not exist

sturdy herald Mar 20, 2020, 9:50 PM

#

hello everyone. does anybody know if pandora works in hassio

flat hedge Mar 20, 2020, 10:00 PM

#

I got it working, pasted the link on my phone instead of desktop and it worked

#

Now, can anyone tell me how I get a certfile for my nodered add-on? I'm getting this error [16:00:02] FATAL: Unfortunately, the file specified in the [16:00:02] FATAL: 'certfile' option does not exists.

#

I copied my old config folder over so I'm surprised I don't have one

flat hedge Mar 20, 2020, 11:17 PM

#

When setting up the Let's Ecrypt add-on, what do I put for domains? Is that my local HA ip address?``email: null
domains:

null
certfile: fullchain.pem
keyfile: privkey.pem
challenge: http
dns: {}``

trail idol Mar 21, 2020, 5:25 AM

#

can pihole still be used even with NUC ?

raven tinsel Mar 21, 2020, 7:42 AM

#

@trail idol Sure, however, in a Home Assistant context, I personally would recommend to take a look at AdGuard as an alternative

trail idol Mar 21, 2020, 7:42 AM

#

Thanks

finite raven Mar 21, 2020, 10:04 AM

#

Hi, I am trying to setup MQTT broker and integration, I installed MQTT broker and created an user with user group, Then should add this user in allowed users list to connect MQTT broker?

manic fox Mar 21, 2020, 10:06 AM

#

If you are using the user of Home Assistant, you do not need to specifically create the user for MQTT

#

unless ofcourse if you want to specifically want it for some reason

#

after the broker is running properly (check the add-on's log) . then head over to Developer Tools -> MQTT to test a topic

finite raven Mar 21, 2020, 10:09 AM

#

Now I used a user with Administrator group, I should add the username in MQTT Broker config?

#

It has a logins: [] option in config section, I should add the created user, username?

manic fox Mar 21, 2020, 10:13 AM

#

no need if you are planning to use the same admin user

finite raven Mar 21, 2020, 11:31 AM

#

If I want use normal user?

manic fox Mar 21, 2020, 12:00 PM

#

as long as it is a HomeAssistant, you can use without specific mention in the add-ons's config. if you want a specific for MQTT, you need to create one. You should start reading the docs https://github.com/home-assistant/hassio-addons/tree/master/mosquitto#option-logins-optional

strong sage Mar 21, 2020, 3:59 PM

#

Hello all. I'm currently using the DuckDNS and Nginx Proxy Manager Add-ons. I'm able to successfully access HA externally securely. When accessing locally, I need to use the https URL, which is then shows that it's not secure. In the Nginx Proxy Manager admin page, I've added a proxy host as shown in the video, however, I'm unable to access from the Source as shown in the video, even before activating the SSL. Is there something I'm missing?

#

if I access http://hassio:80, I do see the Congratulations page that I've successfully started the proxy manager but that I have a host that isn't set up yet

strong sage Mar 21, 2020, 4:23 PM

#

@raven tinsel do you have any idea what my issue could be?

raven tinsel Mar 21, 2020, 4:57 PM

#

internal access Home Assistant directly on port 8123

#

Your SSL certificate will not be valid, because it was not given out for the hassio domain, thus not valid

strong sage Mar 21, 2020, 5:12 PM

#

in your example for the nginx proxy add-on, you created a proxy host that would send a valid cert to the local address (link)

#

I'm trying to do the same, but am unable to load the source successfully as you do in the video

#

you're enabling SSL within nginx. With DuckDNS, I have let's encrypt enabled there. I'm not sure if that could be why I am getting the hassio:81 internal error when trying to enable force SSL

#

I disabled letsencrypt in DuckDNS and retried, but still the same outcome

supple elbow Mar 21, 2020, 5:36 PM

#

Hi, I would like to try the Home Assistant Cast feature on my Google Nest Hub but have a problem getting https://cast.home-assistant.io/ to connect to the default address. I get to the page with the picture of the Google Nest Hub but it says "Unable to connect to https://<mydomain>:8123". I use the Nginx Proxy Manager and can access HA via https://<mydomain> both externally and internally. I can also access HA via http://<mydomain>:8123 internally but **not **using https.Can I force Cast to not use port 8123 when trying to connect? As far as I know, only https traffic on port 443 is passed along by Nginx. Is it a router port forwarding problem or Nginx+Cast related?

strong sage Mar 21, 2020, 5:55 PM

#

may I ask how you configured the add-on manager to allow for connection to HA with http?

#

I am using the proxy manager as well, and can only connect via https

#

I can connect to HA externally with https://mydomain as well as https://hassio:8123 locally (unsecure), but cannot connect to HA via http://hassio:8123 while SSL is on

supple elbow Mar 21, 2020, 6:09 PM

#

I have a Proxy Host for my HA domain name (ha.mydomain.com). Scheme is "http". Forward Hostname/IP is my internal IP. Forward Port is 8123. Websockets Support is on. Under SSL, Force SSL is on. That's it.

dark yoke Mar 21, 2020, 6:09 PM

#

remove ssl config from Home Assistant, let the proxy handle it

strong sage Mar 21, 2020, 6:10 PM

#

so I think that's where my issue is. Using a combination of things...

#

do I still need http: specified in my config.yaml?

dark yoke Mar 21, 2020, 6:10 PM

#

that depends

strong sage Mar 21, 2020, 6:11 PM

#

I'm using SSL with DuckDNS, so I think that too is an issue. Using SSL there and looking for the proxy to use it as well

#

with my current config, using DuckDNS for SSL, I have http: specified in the config.yaml with paths to my certs

#

with the proxy, I would not need that?

dark yoke Mar 21, 2020, 6:12 PM

#

You should not have that if you use a proxy

strong sage Mar 21, 2020, 6:13 PM

#

understood

#

removing the SSL from duck now

dark yoke Mar 21, 2020, 6:13 PM

#

no, from http:

strong sage Mar 21, 2020, 6:13 PM

#

so keep SSL in DuckDNS, but remove the SSL certs from my config.yaml

dark yoke Mar 21, 2020, 6:14 PM

#

yes

strong sage Mar 21, 2020, 6:14 PM

#

with a base_url specified, or is that no needed as well?

dark yoke Mar 21, 2020, 6:14 PM

#

that depends on what you use

supple elbow Mar 21, 2020, 6:14 PM

#

Where would that ssl config be? All addons use http. Is there a setting for HA itself? In configuration.yaml, I have http: and base_url: https://<mydomain>.

strong sage Mar 21, 2020, 6:16 PM

#

okay removing the SSL cert and key with only the base_url specified for my https://domainName

dark yoke Mar 21, 2020, 6:16 PM

#

It should not be defined so you are good there @supple elbow

celest wing Mar 21, 2020, 6:19 PM

#

Does anyone here have a few minutes to speak with me about Let's Encrypt & HassIO?

#

I have a non standard (atleast I think) implementation and I have spent the past 5 hours reading about different installations and I can't determine what would be best for me.

dark yoke Mar 21, 2020, 6:20 PM

#

Let's encrypt does not care what uses the certs, and HassIO does not exsit

celest wing Mar 21, 2020, 6:20 PM

#

Apologies... Hass.io

#

I am completely lost, I don't know where to start. I read the docs, I have tried watching videos. I was just hoping someone had a few minutes to point me down the right path.

dark yoke Mar 21, 2020, 6:21 PM

#

Still does not exsist
If you use Home Assistant, and I assume you do since you are in the #add-ons-archived channel, which add-on are you using?

celest wing Mar 21, 2020, 6:22 PM

#

Okay then I think I need to ask a more basic question... What am I running if not Hass.io?

strong sage Mar 21, 2020, 6:23 PM

#

when I remove the SSL cert and the key from the http: section of my config.yaml I am no longer able to access HA via https://mydomainname

celest wing Mar 21, 2020, 6:23 PM

#

I am trying to use the Lets Encrypt addon. I own a domain, and I want to use that domain, with an SSL

strong sage Mar 21, 2020, 6:23 PM

#

I'm able to access HA via http://hassio:8123, but that's because my certs aren't being enforced, preventing me from connecting via https://mydomain

celest wing Mar 21, 2020, 6:24 PM

#

I guess I am using HassOS? Is that the more proper way of phrasing it?

dark yoke Mar 21, 2020, 6:25 PM

#

If you used our image, then yes that would be it

#

Did you configure the add-on?
did it start?
What did the log say?
What is your issue?

celest wing Mar 21, 2020, 6:27 PM

#

Okay. I am sorry I referred to it as Hassio. While working inside the system it refers to itself that way enough that I must have gotten confused.

#

I don't know what to put in the configuration. I have watched a few different videos and seen different configurations but all / most are setup for DuckDNS

#

I have a different implementation and am just looking for the right guide to get me going.

#

https://www.home-assistant.io/docs/ecosystem/certificates/tls_domain_certificate/

dark yoke Mar 21, 2020, 6:28 PM

#

did you ever look at the documentation?
Videoes are outdated FAST

celest wing Mar 21, 2020, 6:29 PM

#

This seems to be the closest thing to what I am looking for. Does that seem about right?

dark yoke Mar 21, 2020, 6:29 PM

#

https://github.com/home-assistant/hassio-addons/tree/master/letsencrypt#how-to-use

#

linked from the add-on page

celest wing Mar 21, 2020, 6:30 PM

#

Yep. Saw that one too. Okay one final question about that.

#

The email. Is it just any email? Or does it have to be on the domain I am going to use?

dark yoke Mar 21, 2020, 6:31 PM

#

any

celest wing Mar 21, 2020, 6:31 PM

#

Okay. I will dig in and return if I have any questions. Thank you for your help.

#

I appreciate it.

strong sage Mar 21, 2020, 6:39 PM

#

so I've removed the SSL cert and key from my config.yaml with the base_url pointing to https://mydomain and rebooted HA. I've then added a proxy host in the proxy manager pointing to mydomain that then has a destination of hassio on port 8123

#

I am able to access the source, but when I attempt to enable SSL, I'm receiving an internal error

#

I'm not sure why the proxy cannot apply SSL

celest wing Mar 21, 2020, 6:54 PM

#

@dark yokeStarted and... It failed. I have the logs here, but I am wondering if I have to do something to the website I am hosting in order to make this valid.

strong sage Mar 21, 2020, 7:21 PM

#

should I be specifying mydomain for the base_url in http: when using the proxy manager?

#

I don't understand why I cannot enable SSL in the proxy manager for my domain

ivory ether Mar 21, 2020, 9:44 PM

#

Hello! I'm trying to install the latest moitoneye updates (not yet released), so I downloaded it and added it to /addons, but when I go to install it, apk fails. I separated out the RUN lines and it appears to fail installing gcc=9.2.0-r3. It doesn't say how it failed. Any ideas?

#

Specifically:

ERROR (SyncWorker_4) [supervisor.docker.addon] Can't build local/amd64-addon-motioneye:dev: The command '/bin/bash -o pipefail -c apk add --no-cache --virtual .build-dependencies gcc=9.2.0-r3' returned a non-zero code: 2

There error code seems to change each time

sly kindle Mar 21, 2020, 10:00 PM

#

@strong sage nginx proxy manager?

#

@ivory ether you wait for the addon to get updated. You don't use /addons directory at all unless you are developing your own

ivory ether Mar 21, 2020, 10:01 PM

#

OK, so what if I was trying to develop a commit?

#

surely local addon development is possible

sly kindle Mar 21, 2020, 10:01 PM

#

yes, you can use /addons for that, sorry

#

you can download the existing one and place it there

ivory ether Mar 21, 2020, 10:02 PM

#

I am trying to test my pull https://github.com/home-assistant/operating-system/pull/609

#

this not released version adds video support

sly kindle Mar 21, 2020, 10:02 PM

#

you might check the dev channel in the community addon discord for this though

ivory ether Mar 21, 2020, 10:02 PM

#

kk sorry

strong sage Mar 21, 2020, 10:04 PM

#

@sly kindle yessir

sly kindle Mar 21, 2020, 10:04 PM

#

and duckdns?

#

if so, you would not use the duckdns addon for LE certs, and would set accept_terms: to false

#

Because Nginx Proxy Manager will do that instead

limber bluff Mar 22, 2020, 4:48 AM

#

I am trying to install esphome on my raspberry pi 3b, when I push install I see this error in my logs

#

20-03-22 04:44:59 ERROR (SyncWorker_0) [supervisor.docker] Can't create container from addon_15ef4d2f_esphome: 404 Client Error: Not Found ("No such image: esphome/esphome-hassio-armv7:1.14.3")

#

Any idea what I can do to fix this?

#

I also see it on startup from sync worker 17

#

I am updating home assistant from 107.0 to 107.5, i dont expect it to fix it but just in case (problem now resolved)

summer nimbus Mar 22, 2020, 6:49 AM

#

Hi everyone, I was hoping to get some help here before I resort to starting from scratch with the nginx proxy manager #add-ons-archived It appears somehow mixed up passwords and cannot authenticate. Is there a way to reset the password or pull it from DB? Thanks in advance for the help.

ember cobalt Mar 22, 2020, 3:55 PM

#

Hi guys, I can't add new repository,

#

Can't load from repository https://github.com/sabeechen/hassio-google-drive-backup

#

Is this because my internet connection is too slow?

dense galleon Mar 22, 2020, 7:14 PM

#

is there any issue with samba starting on a new install? Mine will not install

#

I mean start

honest rose Mar 22, 2020, 8:56 PM

#

Does anyone have any advice on resetting the password for Nginx Proxy Manager. admin@example.com / changeme isnt letting me in even through plugin has been removed and reinstalled.

#

@summer nimbus It looks to be a bug. Did you have any luck?

strong sage Mar 22, 2020, 10:09 PM

#

I think the Nginx Proxy Manager is storing its information in the mariaDB which is a requirement for that add-on. I'd try reinstalling that add-on as well since the reinstall of proxy manager itself didn't resolve

quasi oyster Mar 22, 2020, 11:32 PM

#

I installed the ADB server add-on. Is it possible to call ADB commands from the SSH terminal?

summer nimbus Mar 22, 2020, 11:47 PM

#

Does anyone have any advice on resetting the password for Nginx Proxy Manager. admin@example.com / changeme isnt letting me in even through plugin has been removed and reinstalled.
@honest rose Didn't work for me either, I discovered I had the password saved on another browser and was able to get in, sorry not a real solution

honest rose Mar 22, 2020, 11:48 PM

#

Thanks @summer nimbus I ended up using phpmyadmin to delete the database.

dense spadeBOT Mar 23, 2020, 12:46 AM

#

@patent copper posted a code wall, it is moved here --> https://paste.ubuntu.com/p/KwCch3c98d/

sly kindle Mar 23, 2020, 2:11 AM

#

@patent copper https://www.reddit.com/r/Folding/comments/fjqqwm/help_failed_to_get_assignmentno_wus_available_for/ ?

snow parrot Mar 23, 2020, 8:16 AM

#

Hi all, I'm trying to get the plex #add-ons-archived for hassio working. Can anyone point me in the direction of how to mount a network share for media??

neon totem Mar 23, 2020, 11:52 AM

#

Which Folders do I have to Map for SAMBA Addon?

void steppe Mar 23, 2020, 12:09 PM

#

hey. is there any reason that i should use secrets if i'm using addons? Is it possible that every addon take a look in my secret file?

raven tinsel Mar 23, 2020, 12:21 PM

#

@snow parrot You can't mount network shares

#

@void steppe The reason to use secrets is to store them centrally, I do not have them visible in the UI.

void steppe Mar 23, 2020, 12:23 PM

#

@void steppe The reason to use secrets is to store them centrally, I do not have them visible in the UI.
@raven tinsel so all addons can access secrets.yaml? because zigbee2mqtt gives me problems with that

raven tinsel Mar 23, 2020, 12:26 PM

#

Depends if they request access to the config folder

#

if an add-on has access to the config folder, sure that is possible

woeful comet Mar 23, 2020, 3:41 PM

#

Anyone can explain me howto notify an anounce on my alexa using AppDaemon?

uncut garnet Mar 23, 2020, 3:42 PM

#

do you need appdaemon?

#

arnt there lots of integrations

#

and are you an actual pilot?

woeful comet Mar 23, 2020, 3:43 PM

#

I already use appDaemon for manage reminder of garbage rotation

uncut garnet Mar 23, 2020, 3:44 PM

#

hmm i mean i know of it, but dont use it

#

i think there are integrations that would do what your looking for. Cant say for sure if its more efficient to install another integration to do what your looking for or find away to do it with appdaemon

valid bay Mar 23, 2020, 5:00 PM

#

Looking at the "Let's Encrypt" they mention Google DNS as supported without opening port 80 (I'd prefer not to) - is this Google Domains DNS/"ns-cloud1.googledomains.com" for example? or is that referring to Google Cloud DNS?

valid bay Mar 23, 2020, 5:23 PM

#

Eh, worked around it anyway, just used DNS/port 80 for renewals.

desert cradle Mar 23, 2020, 6:25 PM

#

hosting dns, i use cloudflare dns for mine

brittle cape Mar 24, 2020, 1:57 AM

#

does anyone use EdgeOS addon here?

ornate cradle Mar 24, 2020, 6:31 AM

#

I just set up HassIO and installed Mosquito but I am having a hard time configuring it. No matter what I try it just comes up with this:Failed to save addon configuration, not a valid value for dictionary value @ data['options']. Got {'logins': [{'username': 'user'}, {'password': 'pass'}], 'anonymous': False, 'customize': {'active': False, 'folder': 'mosquitto'}, 'certfile': 'fullchain.pem', 'keyfile': 'privkey.pem', 'require_certificate': False}

#

I have searched google and some people have had similar issues but I couldn't find a response that actually works for me.

#

Many Thanks 🙂

dull jewel Mar 24, 2020, 11:56 AM

#

Random not-specifically-HA-related question. Using Ad Guard, is it best to set my router's WAN DNS to the AdGuard IP? Or should I set it in DHCP so that each client is polling instead of the entire WAN connection?

sly kindle Mar 24, 2020, 1:18 PM

#

@dull jewel each client

#

@ornate cradle restore the addon config to default?

ornate cradle Mar 24, 2020, 1:21 PM

#

I have tried that by it but same result... @sly kindle

chrome tusk Mar 24, 2020, 1:37 PM

#

@dull jewel each client
@sly kindle Do you mean I should set HA’s AdGuard Home to act as DHCP as opposed to letting my router be the DHCP?
Reason I ask is AdGuard Home is showing my router’s IP address on the interface.

sudden tartan Mar 24, 2020, 6:38 PM

#

where I can find samba share?

#

Im on the clean HA, and in add-ons I cant find it

dull jewel Mar 24, 2020, 7:09 PM

#

@chrome tusk I believe that he meant that Ad Guard's IP should be set as the DNS on your router's DHCP but only for internal networks. I originally had mine set as DNS for my WAN network.

flint marlin Mar 24, 2020, 8:07 PM

#

Guys I've been trying to get this Lutron cert all day, I even re-installed Hassio , but I cant figure it out - I'm not sure if it even generated the cert or not. Can i copy/paste the log file maybe somebody can at least point me in the right direction?

https://github.com/hassio-addons/addon-lutron-cert

surreal kraken Mar 24, 2020, 8:13 PM

#

maria db log is giving me these errors

2020-03-24 20:56:23 22 [Warning] Aborted connection 22 to db: 'xxxxx' user: 'xxxxx' host: '172.30.32.1' (Got an error reading communication packets)
2020-03-24 20:56:23 23 [Warning] Aborted connection 23 to db: 'xxxxx' user: 'xxxxx' host: '172.30.32.1' (Got an error reading communication packets)

#

states are not getting written to db too, all graphs are flat-lining

steep palm Mar 24, 2020, 8:18 PM

#

is there any addon which dynamically update the IP address of my domain. Basically the dynamic update part of the duckdns add-on

surreal kraken Mar 24, 2020, 8:19 PM

#

@steep palm perhaps your isp modem\router has this option ?

flint marlin Mar 24, 2020, 8:20 PM

#

how do I post a log - is it hastebin? don't wann break any rules

steep palm Mar 24, 2020, 8:21 PM

#

@surreal kraken unfortunately no.

surreal kraken Mar 24, 2020, 8:22 PM

#

@flint marlin ³ https://hastebin.com/ or https://paste.ubuntu.com/

flint marlin Mar 24, 2020, 8:22 PM

#

thanks guys

surreal kraken Mar 24, 2020, 8:23 PM

#

@steep palm then no, only duckdns can help you

flint marlin Mar 24, 2020, 8:25 PM

#

okay guys here it goes

#

https://hastebin.com/xasazoweka.sql

steep palm Mar 24, 2020, 8:25 PM

#

if i get a domain on Namecheap or google domains. their integrations will do the job right ?

flint marlin Mar 24, 2020, 8:25 PM

#

so it looks good...until the end. does that mean that it did not generate the certificate?

steep palm Mar 24, 2020, 8:25 PM

#

https://www.home-assistant.io/integrations/namecheapdns/

#

https://www.home-assistant.io/integrations/google_domains/

jade wing Mar 24, 2020, 8:28 PM

#

You'd do the SSL cert in the LetsEncrypt add-on

dark yoke Mar 24, 2020, 8:28 PM

#

#integrations-archived for #integrations-archived @steep palm

flint marlin Mar 24, 2020, 8:32 PM

#

I have no idea if it generated the cert or not. I even re-installed hassio today

#

everything I googled about generating this cert is over a year old, and involves using python. I thought the point of this add-on was not to do that

#

The instructions make it seem like its super easy, ive been at this all day

random talon Mar 24, 2020, 8:45 PM

#

I've never used it but i would check your logs

sly kindle Mar 24, 2020, 8:54 PM

#

@steep palm there are other addons out there that support various dyn dns services

shrewd creek Mar 24, 2020, 8:55 PM

#

Could someone point me to the right direction at configuring NGINX Home Assistant SSL proxy add-on? I just can't get my head around it. What should i but in the configuration file or where i should but it(it says share folder in the customize part). I dont need the answer, just a plain simple tip's what to do and where :).. trying to proxy for bitwarden that i don't have to open another port on my router..

flint marlin Mar 24, 2020, 9:32 PM

#

heres my log - at this point I don't even know if it generated the certificate or not

#

https://hastebin.com/xasazoweka.sql

half beacon Mar 24, 2020, 10:30 PM

#

Hello everybody. I've had the calendar card plugin for quite awhile now, but it stopped working awhile back and now gives me only "response error 400" for all of my Google calendars. It seems as though HA isn't pinging Google for calendar info anymore, but my Google ID and secrect are correct in my config.yaml and everything looks good in Google developers console. Anybody else having issues with the Google calendars plugin?

obtuse ginkgo Mar 24, 2020, 11:45 PM

#

if you run https://www.home-assistant.io/integrations/unifi/#presence-detection and the unifi controller add-on, would the home assistant IP work for the host or do you have to figure out what IP the unfi docker container has?

undone crow Mar 25, 2020, 1:43 AM

#

Anyone here experienced with hassio addons can tell me why this addon fails to start? https://github.com/james-fry/hassio-addons/tree/master/rtl4332mqtt
I opened an issue specifying the errors I get when trying to run it: https://github.com/james-fry/hassio-addons/issues/31

ebon dome Mar 25, 2020, 10:35 AM

#

hi, is it possible to use the HB-RF-USB-TK by OCCU Addon, would like to use Hassio and occu with this adapter HB-RF-USB-TK

restive echo Mar 25, 2020, 2:45 PM

#

Anyone ever migrated grafana and/or influxdb from a standalone install to hassio?

frozen coyote Mar 25, 2020, 5:21 PM

#

Hi, for addon snmp on hassio

#

it's possible to transform the result if is in octet to mbit/s

#

in sensor configuration.yaml

strong atlas Mar 25, 2020, 6:44 PM

#

Hey guys

#

anyone any pointers how to use the value of some entities (on/off) in the grafana dashboard? i can perfectly graph numerical data but id like it to display the state of the entity properly.

pastel tangle Mar 25, 2020, 8:16 PM

#

@raven tinsel seeing how you're online was wondering if I could get your input on a split-tunnel wireguard config. Can't get mine to work apart from full-tunnel. I know it's all about the allowed_ips setting but just can't work out what I'm doing wrong 😞

raven tinsel Mar 25, 2020, 8:17 PM

#

Check out the community forum topic on the wireguard add-on

#

is has been discussed a couple of times

pastel tangle Mar 25, 2020, 8:18 PM

#

I checked that and I tried what people were suggesting, including you but I either get all traffic through or nothing at all loads

#

posted a message on the topic a few hours ago actually

#

🥺

chrome talon Mar 25, 2020, 9:31 PM

#

Hi, I'm trying to install the discrete plugin for Grafana. I do it from docker with grafana-cli, I can see that the plugin is installed in /var/lib/grafana/plugins but it is not available in the plugins even after a restart. Any idea how I can fix that? Thanks.

#

Since I'm here, I'll ask a question regarding Pi-Hole. It does not display clients name but their IPs, despite I use it as DHCP server. Any idea?

#

Note that I chose the Show everything and record everything option in privacy settings.

#

Any idea how I can make sure that the Pi-hole device is using itself for DNS resolution instead of the hypervisor?

#

It seems that's the issue

chrome talon Mar 25, 2020, 10:06 PM

#

It seems that's an issue in current pihole and a PR has been merged and will be part of v5.0.

magic sparrow Mar 25, 2020, 11:00 PM

#

HI all I am having troubles. I am all new to HA. I am attempting to install the Unifi addon. it installed ok and when I click the webui it takes me to the unifi page as if I am configuring a brand new controller. When I try to restore from my backup it says the version of my back up is to new. What can I do to fix this?

green spade Mar 26, 2020, 5:03 AM

#

Anybody else been having issues with the Spotify addon? Had it working for ages but about a month ago it stopped working properly...I've updated it and my HASSIO system since to no avail. Basically Spotify will show that it is playing but no audio comes out, although randomly I have gotten it to work and when I change the song it borks it again.

median osprey Mar 26, 2020, 7:44 AM

#

hej there!i have a question about Vscode and Esphome. Both addons are running. But I get an error. Cannot connect to ESPHome dashboard. Make sure you can access to ${this.endPoint} in vscode .my settings are set like this ssl: true certfile: fullchain.pem keyfile: privkey.pem leave_front_door_open: true

Do you have any ideas?

#

Port 6052 is also reachable

median osprey Mar 26, 2020, 10:25 AM

#

ok i´ve set ssl to false and the error is gone. But autocompletation isn´t going

chrome parcel Mar 26, 2020, 3:22 PM

#

hello, I have unifi controller addon

#

were can I find the json config file?

young nimbus Mar 26, 2020, 3:25 PM

#

I just dropped a new video today! Tasmota and HA Back-ups to the cloud. Something we all need. Uses 2 addons from independant GIT contributors. https://youtu.be/2MNxcTPCzZM

winged basin Mar 26, 2020, 4:54 PM

#

Hello colleagues! I just started a fresh install of hass.io today. Not sure why the SMB from the add-on store does not start at all?? The moment I click START, it lights up red without any spinning circle. Modifying the config with the right YAML format also gives me error that it is invalid. Nothing can be seen in the log.

#

Any suggestions? Thanks! 🙂

gritty furnace Mar 26, 2020, 5:59 PM

#

Im running the deCONZ add-on and I got a strange problem with osram zigbee devices. They show up in homeassistant but im not able to control them. I can control them through phoscon and then they change state in homeassistant.
Its only osram devices, I got loads of xiaomi and ikea that works well.
How do I troubleshoot this?

sly kindle Mar 26, 2020, 6:25 PM

#

@winged basin when any addon doesn't start, check the logs on the system page at supervisor > system

#

But I might guess you didn't enter a password?

night portal Mar 26, 2020, 7:16 PM

#

how is it possible to install addons not using hass.io OS but raspbian with HA?

sly kindle Mar 26, 2020, 7:22 PM

#

@night portal you don't have the right installation for that

vernal anvil Mar 26, 2020, 8:08 PM

#

Hmm. I'm not sure my question about InfluxDB was correct in #330944238910963714 - can someone give me a hint? https://discordapp.com/channels/330944238910963714/330944238910963714/692825489198547073

noble oak Mar 27, 2020, 12:36 AM

#

hey guys, duckdns stopped working for me....

winged basin Mar 27, 2020, 4:02 AM

#

@winged basin when any addon doesn't start, check the logs on the system page at supervisor > system
@sly kindle Thanks for taking time answering my question. There wasn't any error directly in relation to the add-on.

#

20-03-27 04:01:14 WARNING (MainThread) [supervisor.tasks] Watchdog found a problem with CoreDNS plugin! 20-03-27 04:01:14 WARNING (MainThread) [supervisor.tasks] CoreDNS plugin is in fails state / Reset config 20-03-27 04:01:14 INFO (MainThread) [supervisor.dns] Start CoreDNS plugin 20-03-27 04:01:14 INFO (SyncWorker_4) [supervisor.docker.interface] Clean hassio_dns application 20-03-27 04:01:16 INFO (SyncWorker_4) [supervisor.docker.dns] Start DNS homeassistant/armv7-hassio-dns with version 1 - 172.30.32.3

#

Could this be a DNS issue? 172.30.32.3 is not my private IP at all...

sly kindle Mar 27, 2020, 4:03 AM

#

@winged basin try starting the add-on again and then check the log

#

theres an internal docker Network for the add-ons. thats what the IP is

winged basin Mar 27, 2020, 4:05 AM

#

Oh I see...

#

Here is my new log:

dense spadeBOT Mar 27, 2020, 4:05 AM

#

@winged basin posted a code wall, it is moved here --> https://paste.ubuntu.com/p/GTb4PPNNYg/

winged basin Mar 27, 2020, 4:05 AM

#

Ooops sorry.... thanks @dense spade

sly kindle Mar 27, 2020, 4:07 AM

#

so you see the core-dns stuff every time you try to start the samba add-on?

winged basin Mar 27, 2020, 4:08 AM

#

It is repeating in a loop... what is CoreDNS for?

sly kindle Mar 27, 2020, 4:09 AM

#

dns for the containers

#

what are you installed on?

marsh rover Mar 27, 2020, 4:10 AM

#

@noble oak Any chance someone's playing Animal Crossing at your house? Found it overrode the port forwarding rules on my router via UPnP. Disabling UPnP and reentering the port forwards worked for me.

winged basin Mar 27, 2020, 4:11 AM

#

hass.io image directly on SD card / RPi

#

RPi3 using 32bit image

sly kindle Mar 27, 2020, 4:12 AM

#

@winged basin you can try a ha su repair in the ssh addon terminal

winged basin Mar 27, 2020, 4:12 AM

#

Hmmm... @sly kindle it is working now...!

#

Strange...?

sly kindle Mar 27, 2020, 4:12 AM

#

hmm ok

winged basin Mar 27, 2020, 4:12 AM

#

So should I worry about the repeating CoreDNS watchdog warning?

#

Thanks for your help anyway @sly kindle

sly kindle Mar 27, 2020, 4:13 AM

#

if it keeps happening you might try that repair command

winged basin Mar 27, 2020, 4:14 AM

#

okay will do that too... it is a brand new install though... something broke it?

paper magnet Mar 27, 2020, 6:08 AM

#

good morning I have a problem with pi-hole. Here is the log.
https://paste.ubuntu.com/p/ctd6R7VnHs/
dnsmasq: failed to create listening socket for port 53: Address in use
Output of pi-hole container netstat -tulpn
https://paste.ubuntu.com/p/RBjYz5gQNd/

atomic vapor Mar 27, 2020, 10:42 AM

#

its in use...

#

netstat -tlpn | grep 53

#

oh its a container...

#

right

paper magnet Mar 27, 2020, 10:42 AM

#

yes it is a port 53 problem

atomic vapor Mar 27, 2020, 10:43 AM

#

yeah, run the cmd I gave if you dont midn

#

mind*

paper magnet Mar 27, 2020, 10:43 AM

#

HA is running supervisor in a docker container on ubuntu

atomic vapor Mar 27, 2020, 10:43 AM

#

I am a Sr Multi-Cloud Architect

#

so I do that crap all day

#

ah

night portal Mar 27, 2020, 10:43 AM

#

Hey guys,
i'm trying to install https://github.com/nstrelow/ha_philips_android_tv
but failing badly. When i used #672217570283094017, I was able to just to the installation but now with Hass.io I dont know how to do it.
I started with installing a terminal and "run git clone https://github.com/suborb/philips_android_tv"
but then "pip3 install -r requirements.txt" failed, because it couldnt find the file

atomic vapor Mar 27, 2020, 10:43 AM

#

its probably trying to fwd to the 53 already running

paper magnet Mar 27, 2020, 10:43 AM

#

y

atomic vapor Mar 27, 2020, 10:44 AM

#

i use the venv install personally

#

b/c of all this nonsense

#

and other reasons

#

works 100x better imho

#

and if your not a container guy...

#

53 is dns

#

so you have a masq running already probably

#

i used to run the jasper project btw

paper magnet Mar 27, 2020, 10:45 AM

#

I am not a container guy 😄 , I just wanted to try out docker

atomic vapor Mar 27, 2020, 10:45 AM

#

docker is a container

#

but I hear you

#

use this

#

portainer.io

#

free and will make ur life 100x easier

paper magnet Mar 27, 2020, 10:45 AM

#

but one thing which is very handy is the nginx manager as reverse proxy

atomic vapor Mar 27, 2020, 10:46 AM

#

yes, I hear you there

#

using LetsEncrypt?

paper magnet Mar 27, 2020, 10:46 AM

#

y

atomic vapor Mar 27, 2020, 10:46 AM

#

is that a yes or why?

paper magnet Mar 27, 2020, 10:46 AM

#

yes

atomic vapor Mar 27, 2020, 10:46 AM

#

k

#

kewl

#

you got this then

#

i dont

#

but I use my hass in a weird way

#

:p

paper magnet Mar 27, 2020, 10:47 AM

#

this venv is also a thing I need to learn

atomic vapor Mar 27, 2020, 10:47 AM

#

I also ran into issues with it in a container with tensorflow and some other integrations

#

nothing to learn

#

literally is just like having a diff bashrc

#

you source it and your there

#

its actually super easy

paper magnet Mar 27, 2020, 10:48 AM

#

ok

atomic vapor Mar 27, 2020, 10:48 AM

#

happy to help

paper magnet Mar 27, 2020, 10:48 AM

#

If you say so mildpanic

atomic vapor Mar 27, 2020, 10:48 AM

#

familiar with a source file?

#

or an env

#

in general?

paper magnet Mar 27, 2020, 10:48 AM

#

no

atomic vapor Mar 27, 2020, 10:48 AM

#

your "ENV" is your environment

#

so all the things in mem right now

#

so if you type "echo $HOSTNAME"

#

thats an example

#

well a "source file" is just a bunch of x=y

#

which changes stuff just for hass

#

thats it

#

if you follow the walk through its way simple

#

and you can keep it all in your configs so if you restore its nothing

#

anyways... just make sure nginx isn't trying to fwd 53

#

that might fix your issue

paper magnet Mar 27, 2020, 10:51 AM

#

ok thanks for your help I will work on that

atomic vapor Mar 27, 2020, 10:51 AM

#

np

night portal Mar 27, 2020, 11:01 AM

#

https://discordapp.com/channels/330944238910963714/672220642099200000/693047612206743582
anyone?

atomic vapor Mar 27, 2020, 11:02 AM

#

are you in the same dir?

#

if you get stuck, DM me and I will see if I can help, I need to look at those libs anyways

#

just pip3 install pycrypto==2.6.1

#

and pip3 install requests==2.13.0

#

thats all that is in the file anyways

night portal Mar 27, 2020, 11:04 AM

#

ok

#

i try. thank you!

atomic vapor Mar 27, 2020, 11:05 AM

#

sure np

night portal Mar 27, 2020, 12:31 PM

#

anyone knows how to solve "c compiler cannot create executables" ?
packages in terminal i use:

python
py-pip
gcc

steady bobcat Mar 27, 2020, 12:35 PM

#

binutils?

night portal Mar 27, 2020, 12:46 PM

#

didnt help

steady bobcat Mar 27, 2020, 12:47 PM

#

Could be a missing stdlib or something too

night portal Mar 27, 2020, 12:48 PM

#

it finds gcc but then says "checking whether the C compiler works...no"

steady bobcat Mar 27, 2020, 12:48 PM

#

Most distros have a build-tools package or something... that could help

#

Yeah, that's a typical configure script output. It usually tests that by generating a very simple c program like #include <stdio.h> int main(void) { return 0;} and try to compile it

night portal Mar 27, 2020, 12:50 PM

#

where do i have to put it? im quite a noob with hass.io etc. just want to install that addon "https://github.com/nstrelow/ha_philips_android_tv"

steady bobcat Mar 27, 2020, 12:51 PM

#

You don't. That's how the setup script does it behind the scenes.

#

I'd repor this to the maintainer. It shouldn't require this much effort to install an add-on.

dark yoke Mar 27, 2020, 12:53 PM

#

that's because it's not an addon, but a custom_component

steady bobcat Mar 27, 2020, 12:53 PM

#

Except this doesn't seem to be an addon, I see now.

dark yoke Mar 27, 2020, 12:54 PM

#

aaand the instructions is wrong and does not make any sense for a custom_component

night portal Mar 27, 2020, 12:56 PM

#

😭 what can i do now?

#

or is there another solution to add my tv?

dark yoke Mar 27, 2020, 1:11 PM

#

See #integrations-archived

night portal Mar 27, 2020, 1:12 PM

#

i switched to this:
https://www.home-assistant.io/integrations/androidtv/
which works like a charm ;)

thank for all your help!

noble oak Mar 27, 2020, 1:13 PM

#

going to reinstall duckdns... should I delete the SSL folder?

sly kindle Mar 27, 2020, 2:35 PM

#

does your install have a new ip @noble oak ?

#

a new local ip?

weary stratus Mar 27, 2020, 5:32 PM

#

Hi all. I use Duck DNS add on as means to connect to Home Assistant from outside LAN. I have noticed that I cannot connect to HA after a power outage. It seems that the problem is caused by HA (and Duck DNS) booting up before my router has chance to connect to internet. Apparently (not sure about that) after booting, Duck DNS does not make additional attempts to connect to the server and report my dynamic IP. Any suggestions on how to solve this issue?

noble oak Mar 27, 2020, 6:06 PM

#

@sly kindle i installed everything again and its working... one thing that is killing me now is that TTS isn't working anymore.

#

where can i get some help with that? @sly kindle

shut zodiac Mar 27, 2020, 7:26 PM

#

Hello, is there a way to avoid getting :
"code-server is being accessed over an insecure domain. Some functionality may not work as expected."
everytime i start vscode in HA ?

silent seal Mar 27, 2020, 8:37 PM

#

Hi all. Hope everyone is ok, (with this coronovirus) pls keep safe.

#

This is my first chat so for my bad english.

#

I have a problem with DuckDns. Today i migrate from "Home assistant core" at Freenas Jail to "Hass.io Supervised" at Freenas VM Ubuntu 18.04.04.

#

The reason i do this migration was for having the ADD-ONS that Home Assistant Core don't have. Because i need to have access from outside my lan to HA.

#

I already have OpenVPN to do that, but i prefer to make it with DuckDns and SSL, because sometime i forget to turn on the OpenVPN at my android mobile so this is not very useful.

#

After i manage to finish the migration, i follow "JuanMTech - How to set up remote access in Home Assistant - Hass.io" and all was ok util i come to the step to make the change at my configuration.yaml at "http:" adding the following

#

http:
base_url: https://mydomain.duckdns.org:8123
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem

#

Then after restart HA to continue guides step, HA never bootup again. So go to configuration through SAMBA share i have made and remove the lines "base_url,ssl_certificate,ssl_key"

#

I have already check the folder /ssl to see if the files "fullchain.pem" and "privkey.pem" are in place and they are.

#

I also make the Port Forward at pfSense for ports "WanIP:80 -> LanIP:80" and "WanIP:443 -> LanIP:8123" like the guide saw me.

#

Also check ports if open with "canyouseeme" and port 443 is OK and also i think port 80 but the is nothing UP at this port so its tell that is can't see me, but i am sure that i also OK port 80.

#

Please is there anyone who can help me complete the DuckDns installation and make my HA with SSL and becaume available from outside my lan.

restive echo Mar 27, 2020, 9:28 PM

#

is the nginx addon setup to only do ssl proxy-ing or can it be set up to serve static files too

thick herald Mar 27, 2020, 9:42 PM

#

Hi, can anyone help me with the official mosquitto Add-On? I'm getting the message "WARNING: SSL not enabled - No valid certs found!" despite running HA and other Addons successfully via SSL. Any ideas?

thick herald Mar 27, 2020, 10:10 PM

#

This is my config :```logins:

username: '!secret mqtt_username'
password: '!secret mqtt_password'
anonymous: false
customize:
active: false
folder: mosquitto
certfile: fullchain.pem
keyfile: privkey.pem
require_certificate: true
cafile: /etc/ssl/certs/ca-certificates.crt```

#

If I ssh into it I can see the certificates:ssl $ ls -ltr total 8 -rw------- 1 root root 1708 Mar 27 23:00 privkey.pem -rw-r--r-- 1 root root 3566 Mar 27 23:00 fullchain.pem ssl $ pwd /ssl

strong coral Mar 28, 2020, 1:23 AM

#

Hi, can somone helpme with RPC shutdown addon? i'm having no logs when i'm starting it and if i use the configured switch nothing happens.

manic fox Mar 28, 2020, 5:56 AM

#

@thick herald You need to give cert information within the add-ons config

thick herald Mar 28, 2020, 6:01 AM

#

@manic fox So I need to set the customize.active option to true? Can I basically import my old default.conf file from my old RPi Mosquitto Installation and just modify the ssl cert paths to the new locations?

manic fox Mar 28, 2020, 6:10 AM

#

Not sure about customize. Just give the ssl.cert paths

thick herald Mar 28, 2020, 6:25 AM

#

I'm really sorry but I don't understand what to do exactly. I've set the certfile and keyfile in the addon-config as seen above. Do you mean I have to set the absolute paths? like ```
certfile: /ssl/fullchain.pem
keyfile: /ssl/privkey.pem

blissful drift Mar 28, 2020, 7:45 AM

#

Hello all! Quick question! Does anyone have Pi-hole installed? I have installed in the past but I was losing my YouTube history so I uninstalled. Any idea how to make it work and still keep track of my playback history? Thank you

thick herald Mar 28, 2020, 8:17 AM

#

@manic fox I got it to work, I’ve created the .conf file which contains nothing but the cert paths. That file is loaded by the customize setting. Still strange why we have a configuration option in the add on settings but that doesn’t get mapped through.

ebon rampart Mar 28, 2020, 9:23 AM

#

Hi All, hoping someone can help with the Samba add-on. I can install it from the add-on store but when I try to start with the default config it won't, no erro, nothing. If I change the config, I.e. change allow_hosts: to a single item and then save it I get an error:
Failed to save addon configuration, not a valid value for dictionary value @ data['options']. Got {'workgroup': 'WORKGROUP', 'username': 'homeassistant', 'password': None, 'interface': '', 'allow_hosts': ['192.168.0.0/16'], 'veto_files': ['._*', '.DS_Store', 'Thumbs.db', 'icon?', '.Trashes']}

ebon rampart Mar 28, 2020, 9:44 AM

#

Help Please!!

#

Hi @raven tinsel , I'm trying to follow the video you did with Dr Zzs today but I cannot start the Samba plugin after just installing it I get an error, If I change the config, I.e. change allow_hosts: to a single item and then save it I get an error:
Failed to save addon configuration, not a valid value for dictionary value @ data['options']. Got {'workgroup': 'WORKGROUP', 'username': 'homeassistant', 'password': None, 'interface': '', 'allow_hosts': ['192.168.0.0/16'], 'vetofiles': ['.*', '.DS_Store', 'Thumbs.db', 'icon?', '.Trashes']}

Are you able to help at all?

raven tinsel Mar 28, 2020, 10:05 AM

#

You need to set a password @ebon rampart

ebon rampart Mar 28, 2020, 10:07 AM

#

I have added a password, does it need to be in quotes as I still get the same error?

#

@raven tinsel I got it to work by copying and pasting the config from the git page over top of what was there by default.

#

@raven tinsel thank you for helping and a HUGE thanks for the yaml 101 course on Dr Zzs stream, it cleared up so much.

restive echo Mar 28, 2020, 12:06 PM

#

addons talk about the /share and /ssl directories are these /usr/share/hassio/share and /usr/share/hassio/ssl on the host?

raven orchid Mar 28, 2020, 12:19 PM

#

hello everyone! Just a quick question: I have modified a hacs plugin, is there a way to reload it inside homeassistant? Or do I have to restart homeassistant himself everytime? Thanks!

chrome tusk Mar 28, 2020, 12:46 PM

#

Is it possible to run an OpenVPN Server from within Home Assistant? I want to access my home network remotely. Cheers.

silent seal Mar 28, 2020, 1:37 PM

#

Inside HA folder /ssl for Docker

sly kindle Mar 28, 2020, 1:56 PM

#

@restive echo it depends on the OS. if you're running on Ubuntu or Debian then, yes.

#

@raven orchid plugins are not add-ons

#

@chrome tusk you might check the wireguard or zero teir add-ons

restive echo Mar 28, 2020, 2:00 PM

#

next question, trying to set up the nginx addon and when i hit start it spins for a second and then stops, nothing is put into the logs at the bottom...

#

fresh install of the addon, only config i changed was adding my domain

#

docker ps doesn't show a container for it

sly kindle Mar 28, 2020, 2:04 PM

#

when an add-on doesn't start check the system page in the UI or the supervisor logs in the ssh add-on console

restive echo Mar 28, 2020, 2:04 PM

#

aha there's where the log is

#

port already allocated

#

now to figure out what decided to steal port 443

shut zodiac Mar 28, 2020, 2:15 PM

#

lsof -i:443

#

should tell you which process is the culprit

potent cliff Mar 28, 2020, 2:31 PM

#

Hey, so i am using the lets encrypt addon and I have the certificate and a DuckDNS address, but i dont know to to use the certificate or how to apply it.

#

https://i.imgur.com/IdS5dmp.png this is my config and it doesnt work https://i.imgur.com/68QoEQv.png

chrome tusk Mar 28, 2020, 3:37 PM

#

@chrome tusk you might check the wireguard or zero teir add-ons
@sly kindle Thanks. 👍

sly kindle Mar 28, 2020, 3:46 PM

#

@potent cliff you don't change the path from the example provided

#

for the cert files

potent cliff Mar 28, 2020, 3:47 PM

#

Ive aleardy fixed it 👍

sly kindle Mar 28, 2020, 3:47 PM

#

Also, you can use just the one duckdns add-on. It has LE built in

potent cliff Mar 28, 2020, 3:56 PM

#

yea i used that 🙂

bleak elk Mar 28, 2020, 4:02 PM

#

Is this the channel for offline TTS add-ons, or is that #Integrations?

sly kindle Mar 28, 2020, 4:47 PM

#

addons are docker containers in a supervised install

karmic rover Mar 28, 2020, 4:48 PM

#

hi, anyone knows if nginx add-on readily supports JWT authentication ( http://nginx.org/en/docs/http/ngx_http_auth_jwt_module.html)

#

?

#

(I would gess not, as it seems to be an exclusive module in the nginx pro - paid product)

pastel tangle Mar 28, 2020, 5:17 PM

#

Usually my CPU is around 10% when not actively using HA but noticed today it's sitting around 30-40% all of a sudden. Only big difference I can think is adding new devices to deconz? But why would that increase CPU that much? Any suggestions on how to track down what's using what? Was thinking maybe Glances would show me?

sly kindle Mar 28, 2020, 5:27 PM

#

@pastel tangle glances will add to the cpu utilization 😄

#

are you using cameras?

pastel tangle Mar 28, 2020, 5:30 PM

#

@sly kindle yes it did haha

#

but gave me sort of any idea maybe. Need to find a way so show you

#

I do have cameras but that is only a problem if I'm on the lovelace tab with the cameras

#

Here https://imgur.com/a/KvFFG9t although not sure if helpeful

sly kindle Mar 28, 2020, 5:36 PM

#

I don't know deconz. But yeah looks like it

pastel tangle Mar 28, 2020, 5:47 PM

#

A quick look around, and found an issue on github about it. Seems to be a problem with one of the deconz processes

bleak elk Mar 28, 2020, 5:54 PM

#

So, here's a question that's been plaguing me - I setup the SSH Add-on on a Supervised install, but the only thing I can use is ha commands. How can I get to the root, host system?

sly kindle Mar 28, 2020, 5:56 PM

#

@bleak elk there's not much to do on the host. it's there to run docker and pass hardware

#

but you can set up access to it over ssh or connect directly

bleak elk Mar 28, 2020, 5:57 PM

#

So, where do I enter docker commands & run things like arecord & aplay to test audio hardware? Connect directly?

sly kindle Mar 28, 2020, 5:58 PM

#

https://ptb.discordapp.com/channels/330944238910963714/330944238910963714/693498441342517340

#

is there some guide for rhasspy going around or something?

bleak elk Mar 28, 2020, 6:15 PM

#

@cogneato Yes - it's on the forums, from the author himself. I keep seeing ot when I run a search for Almond + Ada.

#

As an update question - are Ada + Almond actually proven to be working?

sly kindle Mar 28, 2020, 6:17 PM

#

The audio hardware which works with a pi is too limited for me to just play with it off-hand. USB speakers for example

restive echo Mar 28, 2020, 9:36 PM

#

Set up the AppDaemon addon, it is telling me it can't connect to home assistant, but the docs say it should be able to do it automatically and not to add the server url stuff to the config

#

looks like it's using ws instead of wss to connect

timid osprey Mar 28, 2020, 9:45 PM

#

Hi, noob here sorry.... trying to install add-ons samba share and mqtt broker, but both say ‘Failed to install add-on, Unknown Error, see logs’ what am i doing wrong etc - thanks

restive echo Mar 28, 2020, 10:41 PM

#

lol figured my appdaemon issue out. apparently HA ip banned the appdaemon docker for some reason 🤣

sly kindle Mar 28, 2020, 10:43 PM

#

@timid osprey check the logs on the supervisor > system page after trying to install or start and addon

sour hornet Mar 29, 2020, 12:18 AM

#

Is anyone using UniFi Controller addon ? How to update to the latest client version ?

sly kindle Mar 29, 2020, 12:46 AM

#

@sour hornet for the add-on itself?

sour hornet Mar 29, 2020, 12:48 AM

#

for the Unifi Controller only, the add-on is updated

#

i dont know if i need to wait for a new add-on version or should i install manually

sly kindle Mar 29, 2020, 1:22 AM

#

@sour hornet you wait for the addon to be updated

fossil cedar Mar 29, 2020, 2:32 AM

#

Can someone help me with getting zigbee2mqtt add-on going? Using a flashed CC2531, when I start the addon, I get an error saying that it couldn't start zigbee-herdsman.

#

If I SSH into the hassio container, as root user, and test the write access to the port, it returns failure

#

following the instructions in the FAQ (https://www.zigbee2mqtt.io/information/FAQ.html), I should be able to fix it by using "sudo chown [USER] [PORT]", but it returns "sudo: command not found"

whole egret Mar 29, 2020, 7:38 AM

#

hi. i installed unifi controller addon months ago. when i installed it didnt work unitil i turned off the protection mode on the add on. i accidently turned it back on again yesterday and it stopped working again. now i cant find that protection mode button on the addon page. pls help

blissful drift Mar 29, 2020, 8:22 AM

#

Hello! Can anyone help me?
I tried to install AdGuard on RPi and when I started it this showed in the log:

08:19:58] INFO: Starting NGinx...
nginx: [alert] detected a LuaJIT version which is not OpenResty's; many optimizations will be disabled and performance will be compromised (see https://github.com/openresty/luajit2 for OpenResty's LuaJIT or, even better, consider using the OpenResty releases from https://openresty.org/en/download.html)
2020/03/29 08:20:00 [info] Filter 1 has been updated: 579143 bytes, 30499 rules
2020/03/29 08:20:00 [info] Saving filter 1 contents to: /data/adguard/data/filters/1.txt
2020/03/29 08:20:00 [info] Updated filter #1. Rules: 0 -> 30499

snow summit Mar 29, 2020, 11:15 AM

#

I have a question about my ssh-config..:
I defined it like so:

authorized_keys:
  - >-
    ssh-rsa
    AAAA ..... Wc7h==
    georg
password: ''
allow_agent_forwarding: true

And when I now ssh from my MacBook to my Raspberry it works, but only when I use the user root. But according to my config, the user should be georg, right? Am I missing something here?
With user georg I get a Permission denied (publickey,keyboard-interactive). Error. And in the logs on the raspberry I can see Invalid user georg from 192.168.1.42 port 58319

Would be great if somebody could tell me what I am missing 🙂

jade wing Mar 29, 2020, 11:16 AM

#

That georg in the key is just a comment

#

You could have anything there - it's ignored

#

The stock SSH add-on only uses root, there's a community add-on (https://github.com/hassio-addons/addon-ssh) that is more configurable

snow summit Mar 29, 2020, 11:32 AM

#

@jade wing ok... thank you very much

#

can i ask one more? I have downloaded an VS-Code plugin to connect to a remote via ssh... works fine on some servers i work on...

#

but not to me home-assistant

#

in my logs on my raspberry i see the following: Accepted publickey for root from 192.168.1.42 port 60368 ssh2: RSA SHA256:yphSA6H .... kfZsA Received disconnect from 192.168.1.42 port 60368:11: disconnected by user Disconnected from user root 192.168.1.42 port 60368

jade wing Mar 29, 2020, 11:36 AM

#

I don't use that install method, or add-ons, but I'd check the logs on the remote end to ensure that the server is accepting the key and user

wintry tulip Mar 29, 2020, 12:51 PM

#

Hi all,
Im' trying to configure the Google Assistant SDK (so I can use my Google Assistant to execute commands from Hassio), but I'm getting these messages in the log after I tried to add the token (which gave nasty error)

[14:43:08] INFO: Installing/Updating service client_secrets file
[14:43:08] INFO: Starting Home Assistant GAssisant SDK...

Now the page to add the token is also not available anymore..

desert surge Mar 29, 2020, 1:17 PM

#

It's worth installing mariadb addon for history? It's working a bit slow now the history with all the sensors, but i'll exclude a lot of them.

chrome talon Mar 29, 2020, 1:43 PM

#

Hello, are you able to use VSCode on your local computer and edit files on hassio? I know that there is a VSCode add-on and use it from time to time but I'd prefer to use my local one. Thanks.

wintry tulip Mar 29, 2020, 2:11 PM

#

@chrome talon use samba add-on and then open files locally ?

#

(Don't know why the addon folder is empty with me though)

chrome talon Mar 29, 2020, 2:16 PM

#

Thanks @wintry tulip

#

But the vscode server cannot run on hassio?

weary stratus Mar 29, 2020, 3:13 PM

#

I can not compile and upload to my ESPHome devices as platformio api is down at the moment? Is that correct, or should it compile anyways? It is only a spelling error I am correcting, so nothing new should be necessary to download

sly kindle Mar 29, 2020, 3:24 PM

#

@wintry tulip you don't need the Google Assistant SDK addon unless you intend to add audio hw like mic and speakers. You probably want the Google Assistant integration.

#

And the /addons directory is for manually created addons

wintry tulip Mar 29, 2020, 3:29 PM

#

I see, thought is was already confusion, what do I need then ? The manual config of google_assistant via the config ?

chrome talon Mar 29, 2020, 3:32 PM

#

Guys, any influxdb expert here?

lapis radish Mar 29, 2020, 3:43 PM

#

How do I access Samba Share?

#

I set the username and password, but idk what to do now

chrome talon Mar 29, 2020, 3:51 PM

#

It should appear in your file browser (finder or explorer)

lapis radish Mar 29, 2020, 3:52 PM

#

When I do what?

#

Do I have to go to a certian port on the IP?

wintry tulip Mar 29, 2020, 3:56 PM

#

smb port = 139, IP of your ha

lapis radish Mar 29, 2020, 3:56 PM

#

Ok

#

Now samba share wont start

#

idk why though..

wintry tulip Mar 29, 2020, 3:57 PM

#

there is a log all the way down

lapis radish Mar 29, 2020, 3:57 PM

#

Oh ok

#

It says this, and I cant access the browser page

#

Samba name server HOMEASSISTANT is now a local master browser for workgroup WORKGROUP on subnet 172.17.0.1

Samba name server HOMEASSISTANT is now a local master browser for workgroup WORKGROUP on subnet 172.30.32.1

Samba name server HOMEASSISTANT is now a local master browser for workgroup WORKGROUP on subnet 192.168.86.36

REFRESH

#

Would I be typing in 192.168.86.36:139?

clear idol Mar 29, 2020, 4:05 PM

#

all u need to do is add the correct workgroup name in the config file of samba (bottom page)

#

and a username + pw

lapis radish Mar 29, 2020, 4:05 PM

#

what is a workgroup name?

#

Im just on my home network

clear idol Mar 29, 2020, 4:05 PM

#

its usually just WORKGROUP by default

lapis radish Mar 29, 2020, 4:06 PM

#

I added a username and password

clear idol Mar 29, 2020, 4:06 PM

#

since u dont know what it is i guess u havent changed it

#

ok then save it

#

and now go open file explorer, right click networks , map network drive

lapis radish Mar 29, 2020, 4:07 PM

#

Im on mac.

#

Lol

clear idol Mar 29, 2020, 4:07 PM

#

cant help u for mac

#

just google it, map network drive on mac

lapis radish Mar 29, 2020, 4:07 PM

#

never mind got it'

wintry tulip Mar 29, 2020, 4:07 PM

#

connect to server in mac

lapis radish Mar 29, 2020, 4:07 PM

#

It showed up as a network device

wintry tulip Mar 29, 2020, 4:07 PM

#

smb://ip

clear idol Mar 29, 2020, 4:08 PM

#

ok

lapis radish Mar 29, 2020, 4:08 PM

#

Oh I see the config files now it works!

#

Thanks guys

clear idol Mar 29, 2020, 4:08 PM

#

🙂

#

i have a problem aswell, maybe someone knows :
ive installed duckdns, tried to access my pi outside of my home network and that works. tried to access it on my LAN, and it doesnt work

dense spadeBOT Mar 29, 2020, 4:12 PM

#

@clear idol posted a code wall, it is moved here --> https://paste.ubuntu.com/p/dTN4qhFM45/

clear idol Mar 29, 2020, 4:12 PM

#

this is the log

solemn river Mar 29, 2020, 5:04 PM

#

Hello! Can anyone help me with add-ons (supervisor/dashboard) not showing up anymore after a reboot of my host?

sly kindle Mar 29, 2020, 5:15 PM

#

@solemn river what OS is the host?

solemn river Mar 29, 2020, 5:16 PM

#

debian

#

It's totally weird everything works, just the add-ons don't show up

#

@sly kindle to be exact Debian 10, home assistant is running in docker.

sly kindle Mar 29, 2020, 5:25 PM

#

is the supervisor running?

#

@solemn river

solemn river Mar 29, 2020, 5:26 PM

#

@sly kindle I think so, how can I verify?

#

@sly kindle "ha supervisor info" works

sly kindle Mar 29, 2020, 5:29 PM

#

ha supervisor logs ?

solemn river Mar 29, 2020, 5:30 PM

#

@sly kindle ha supervisor repair went through but didn't help

sly kindle Mar 29, 2020, 5:31 PM

#

you've tried clearing cache in the browser or ctrl+shift+r?

#

ctrl + r

#

or both

#

I always do both

solemn river Mar 29, 2020, 5:32 PM

#

yes, I event went to the settings and cleared everything from Firefox

sly kindle Mar 29, 2020, 5:32 PM

#

and ha supervisor logs is fine?

solemn river Mar 29, 2020, 5:33 PM

#

two issues, trying to copy them to here ... B-)

#

https://paste.ubuntu.com/p/R728MR6m7S/

sly kindle Mar 29, 2020, 5:36 PM

#

have you rebooted the host after that repair?

solemn river Mar 29, 2020, 5:36 PM

#

not yet

sly kindle Mar 29, 2020, 5:36 PM

#

also when did you install this originally? recently?

solemn river Mar 29, 2020, 5:37 PM

#

no that is an install from 105 something originally

sly kindle Mar 29, 2020, 5:37 PM

#

using the steps here? https://www.home-assistant.io/hassio/installation/#preparation

solemn river Mar 29, 2020, 5:37 PM

#

yep

#

it worked till a shutdown of my VM host

#

it came up again with no add-ons showing up. 😟

sly kindle Mar 29, 2020, 5:39 PM

#

is the time right on the system?

#

you can check the ha logs on the dev tools/info page

solemn river Mar 29, 2020, 5:41 PM

#

I rebooted the VM, no change

#

time is correct

#

system log shows no issues

#

supervisor/dashboard still only shows the update to 0.107.7 nothing else

#

ssh add-on is running and I can login

sly kindle Mar 29, 2020, 5:43 PM

#

so it's only the addon store that doesn't open, not the supervisor dashboard, snapshots, etc

solemn river Mar 29, 2020, 5:43 PM

#

I have no add-ons showing up, no repositories. Everything else does work.

#

neither new nor installed addons

#

pressing reload shows in the log:

#

20-03-29 17:43:54 INFO (MainThread) [supervisor.store.git] Update add-on https://github.com/home-assistant/hassio-addons repository
20-03-29 17:43:56 INFO (MainThread) [supervisor.store] Load add-ons from store: 20 all - 0 new - 0 remove

#

but nothing happens

sly kindle Mar 29, 2020, 5:45 PM

#

have a different browser to try?

solemn river Mar 29, 2020, 5:45 PM

#

yes, just as second

sly kindle Mar 29, 2020, 5:45 PM

#

oh two more people have posted the same in #330944238910963714

#

maybe it was an update

solemn river Mar 29, 2020, 5:45 PM

#

oh, I didn't see that.

#

Chromium shows the same state although never used before.

sly kindle Mar 29, 2020, 5:47 PM

#

what does the supervisor card show?

#

📎 unknown.png

#

can you reload it?

solemn river Mar 29, 2020, 5:50 PM

#

It claims so, version is 213

#

~ $ ha supervisor reload
Command completed successfully.

#

Should we switch to #330944238910963714 ?

eternal steeple Mar 29, 2020, 6:03 PM

#

It appears to be an update to the supervisor which is not working with v0.106.5 for me.

solemn river Mar 29, 2020, 6:11 PM

#

@eternal steeple how could I fix it?

sly kindle Mar 29, 2020, 6:13 PM

#

update to 107.7 ?

fossil cedar Mar 29, 2020, 6:56 PM

#

anyone know why none of my add-ons are showing on the supervisor panel?

sly kindle Mar 29, 2020, 7:06 PM

#

@fossil cedar are you updated to 107.7?

fossil cedar Mar 29, 2020, 7:07 PM

#

I just updated and it it working now. Thanks @sly kindle

fluid walrus Mar 29, 2020, 7:20 PM

#

How about HACS? Does everyone use it? Should I?

sly kindle Mar 29, 2020, 7:23 PM

#

HACS is not an addon

fluid walrus Mar 29, 2020, 7:24 PM

#

Actually I came across it while searching Integration for Shelly1, it is a custom component I also could install manually but they suggest the HACS for doing so, now when reading about it I found it very interesting. Does it work stable?

sly kindle Mar 29, 2020, 7:24 PM

#

It's a store for managing and browsing all the custom unsupported stuff that is out there

#

HACS itself is also a custom integration, so also not supported. But it's been stable. Instability really depends on what you end up choosing to install from within it

dark yoke Mar 29, 2020, 7:32 PM

#

And what you install from it, has nothing to do with HACS itself

fluid walrus Mar 29, 2020, 7:36 PM

#

Do YOU both have it installed?

dark yoke Mar 29, 2020, 7:39 PM

#

Well... I maintain it, so kinda have to have it installed to test fixes/new features 🤷

fluid walrus Mar 29, 2020, 7:39 PM

#

LOL 😂

eternal steeple Mar 29, 2020, 8:17 PM

#

@solemn river I have no idea; anyone know how to downgrade the supervisor and keep it there? I need 209; the latest 213 is killing me..

wet cove Mar 29, 2020, 8:18 PM

#

how do i remove mqtt devices? i've renamed them from the device side but the old name and the new name are shown in HomeAssistant. i want to remove the old name

eternal steeple Mar 29, 2020, 8:19 PM

#

@wet cove you probably have recorder keeping them; try to remove the .storage/core.restore_state file

#

and maybe your DB too

solemn river Mar 29, 2020, 8:20 PM

#

@eternal steeple sorry no idea.

#

I also forgot to make a snapshot. raised_eye

sly kindle Mar 29, 2020, 8:24 PM

#

@eternal steeple you don't downgrade the supervisor. you update your HA

eternal steeple Mar 29, 2020, 8:24 PM

#

so I am now officially hosed since I cannot use the 0.106 version of HA with the latest supervisor and I am remiss in not writing code to autogenerate the Lovelace since now the autoconversion from the prior mechanism to define a UI is completely deprecated

#

Why oh why did the former behaviour for legacy definitions have to be eliminated without any alternative than complete adoption of the new system; I was happy with the auto-conversion 😦

wet cove Mar 29, 2020, 8:27 PM

#

@eternal steeple names are not in .storage/core.restore_state. they are however in core.entity_registry.
When i stop HA core, remove the lines from the file and start HA core they come back in Mosquitto integration

sly kindle Mar 29, 2020, 8:27 PM

#

@wet cove remove mosquitto add-on and re-add it

eternal steeple Mar 29, 2020, 8:29 PM

#

what a way to screw up a sunday

#

Maybe I'll just drop the UX and go with Tabler

#

FWIW: https://tabler.io/

wet cove Mar 29, 2020, 8:31 PM

#

I did this:

remove Mosquitto addon
restart HA
re-install Mosquitto addon
open Mosquitto in Integrations
all devices could be deleted

#

After a restart of the clients, they wont show up in Mosquitto in HA
fixed after another restart of HA

smoky trout Mar 29, 2020, 9:50 PM

#

got a same problem

#

my addons ware working (deconz, etc) but not showing up anymore

#

wtf ^^

smoky trout Mar 29, 2020, 10:08 PM

#

updated to 107 7 / cleared browser cache.. everything fine again

lapis radish Mar 29, 2020, 11:37 PM

#

Anyone know of a music player that I can put in the lovelace UI? I just want to be able to airplay one playlist from the UI of Hass

coral parrot Mar 30, 2020, 12:36 AM

#

I am also having the problem where no addons are showing up in the Dashboard. I am on 106. I cannot update to 107 because there are things I need to fix in my config, which I need to use the Check Config addon to do!

#

Is there any fix incoming to the supervisor?

brittle gull Mar 30, 2020, 1:34 AM

#

Looks like I'm not lone. Same issue on 0.106.5.

#

confirmed working again on 107.7

sly kindle Mar 30, 2020, 2:59 AM

#

@coral parrot what do you need to fix?

coral parrot Mar 30, 2020, 3:13 AM

#

I don't know

#

That's the problem

#

The point of the check config addon is to tell me 😉

viscid orchid Mar 30, 2020, 3:50 AM

#

That addon was broken often enough that I just go for it now after reading the breaking changes and adjusting accordingly. Config issues will rarely cause a failure to start, and logs will tell you what’s wrong and what to fix

severe musk Mar 30, 2020, 11:12 AM

#

Do you think there would be much interest in an add-on that spawns a development HA environment and periodically syncs it with live?

#

I'm thinking about trying to build something like that so I can stop building and rebuilding ha

dusky thorn Mar 30, 2020, 11:50 AM

#

looks like supervisor 214 is incoming for us folks < 0.107

dark yoke Mar 30, 2020, 11:50 AM

#

it's comming for everyone

coral bay Mar 30, 2020, 1:23 PM

#

Hello guys! Abit newbi question. I have hassio via supervisor/docker.
If I want to install the samba add-on, will the samba share only be available on the docker host running on Ubuntu or will the samba share "port-forward" by itself so it's visable on the rest of the network?

fast summit Mar 30, 2020, 1:30 PM

#

Should be visible

weary stratus Mar 30, 2020, 1:55 PM

#

Hi all, I'm facing some specific issues with Zigbee2mqtt, would this be the right place to ask?

fast summit Mar 30, 2020, 1:59 PM

#

probably #zigbee-archived

weary stratus Mar 30, 2020, 2:00 PM

#

Thanks!

swift inlet Mar 30, 2020, 2:19 PM

#

I've just installed the InfluxDB add-on on a HA supervised, and configured as suggested. I think my configuration is okay - the InfluxDB Web UI works. I'm seeing this error in my HA log: [supervisor.api.ingress] Ingress error: Cannot connect to host 172.30.33.1:1337 ssl:None [Connection refused]

#

That port 1337 is wrong. The port for InfluxDB is 8086. This is in my configuration.yaml:

influxdb:
  host: a0d7b954-influxdb
  port: 8086
  […]

#

Also, the port seems to be correctly forwarded:

root@bashir:/usr/share/hassio/homeassistant# docker ps | grep -i influx
a0c9c38f8b4c        hassioaddons/influxdb-aarch64:3.6.1              "/init"                  28 minutes ago      Up 28 minutes       0.0.0.0:8086->8086/tcp   addon_a0d7b954_influxdb

#

Any idea why HA tries to contact InfluxDB on that weird port? ( @raven tinsel ?)

#

The people in this thread seem to have the same problem, though after an upgrade: https://community.home-assistant.io/t/cant-update-hassio-to-0-105-x/169466

raven tinsel Mar 30, 2020, 2:27 PM

#

1337 is the internal ingress port to which the addon serves the web interface to HA

#

So that is correct and not weird

swift inlet Mar 30, 2020, 2:28 PM

#

Oh okay. And that doesn't have to be exported from the container?

raven tinsel Mar 30, 2020, 2:28 PM

#

No

#

It is on the internal network interface

weary stratus Mar 30, 2020, 2:29 PM

#

how's everyone doin? 🙂

swift inlet Mar 30, 2020, 2:29 PM

#

True. If I do nc 172.30.33.1 1337 from inside the homeassistant/aarch64-hassio-cli container (via docker exec -it … sh), I can connect.

raven tinsel Mar 30, 2020, 2:31 PM

#

It serves a slightly different interface on that port to be compatible with ingress

swift inlet Mar 30, 2020, 2:32 PM

#

D'Oh, the problem is something else.

#

The error message was from the first HA reboot after the installation - InfluxDB was probably not up by that time.

#

The current problem hides somewhere else (""error":""homeassistant" user is not authorized to write to database "homeassistant""})

#

Let's see if I can fix that.

#

Ah. I plainly forgot to click "Apply" after assigning the permissions to the user. -.- Sorry for the noise!

hot stone Mar 30, 2020, 2:38 PM

#

Hi, I'm running the BitwardenRS addon and would like to try to set up fail2ban, does anyone know how I can enable the BitwardenRS addon to log to a file? According to the BitwardenRS wiki logging to a file can be enabled via a docker environment variable but I'm unsure how to achieve this in the addon.

surreal crest Mar 30, 2020, 3:57 PM

#

is anyone else encountering problems accessing HA via SMB using a Mac with catalina?

#

if i connect to it via the "smb://XXX.XXX.XXX:XXX" it works but if i use "smb://homeassistant" instead it does not

#

and yes, the hostname is homeassistant and i actually find it in the network section in finder

#

and i can also ping the hostname from my mac

valid bay Mar 30, 2020, 5:11 PM

#

Pi-hole is getting replaced with adguard?

valid bay Mar 30, 2020, 5:37 PM

#

oh, interesting. I can't update addons or install new at the moment, my logs are saying:

20-03-30 17:36:07 ERROR (SyncWorker_15) [supervisor.docker.interface] Can't install hassioaddons/adguard-armv7:2.3.3 -> 500 Server Error: Internal Server Error ("Get https://registry-1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)").

hot fog Mar 30, 2020, 6:08 PM

#

I never understand any message that the "Check config" add-on displays... Successful config (partial) group:
Why can't it display whats wrong?

bitter fjord Mar 30, 2020, 8:15 PM

#

Hi, I have issues with Samba add-on. On my computer, I have already set up the Samba, as I use the same computer for more things. Now I obviously can't use the Samba inside the Home Assistant, as whenever I connect to Samba share it will open up the shares from my previously set Samba - not the one from Home Assistant. Does anyone have any idea if my problem is solvable, so that I will be able to edit my Home Assistant configs on my local computer. Thanks!

sly kindle Mar 30, 2020, 8:30 PM

#

@bitter fjord if you are using it for other things, I assume this is a generic linux install?

#

The directories which are shared out in a standard install by the samba addon are in /usr/share/hassio on yours

bitter fjord Mar 30, 2020, 8:37 PM

#

Thank you so much, this was easier than I thought! 🙂 Have a great day!

sly kindle Mar 30, 2020, 8:39 PM

#

@hot fog there's something partially correct about your group: 😛

nova wind Mar 31, 2020, 5:58 AM

#

Hello all.....first time user to Hass.io. So I just finished installing Tasmoadmin but when I goto the web UI I get nothing at all. When I check to see if the service is running still it shows that it's not. Am I missing something here still???? Sorry...total NOOB.

fast summit Mar 31, 2020, 9:27 AM

#

Check the addon log if there's any error messages there @nova wind

sharp crest Mar 31, 2020, 10:26 AM

#

I seem to be unable to load the AdGuard dashboard via Ingress, no errors in the add-on specific log, nor my supervisor log

#

Anybody got any tips on how I could debug this?

dark yoke Mar 31, 2020, 10:53 AM

#

they are #integrations-archived not #add-ons-archived

sharp crest Mar 31, 2020, 11:01 AM

#

Alright, my appologies

#

Thanks

dark yoke Mar 31, 2020, 11:10 AM

#

that was not for you, it was for a user who deleted their post

sharp crest Mar 31, 2020, 11:11 AM

#

Oh

#

I suppose I thought it could have been for me since there is also an integration for adguard 🙂

dark yoke Mar 31, 2020, 11:12 AM

#

sure, but ingress (your issue) is add-on only

timid osprey Mar 31, 2020, 12:27 PM

#

Hi, i have a new install on a win10 laptop using vbox virtual machine, was connected through ip address of the vm, and installed duckdns and configured as per juanmtechs video, set up on the duckdns website, got my domain etc, setup,port foward, but think i got wrong so have been on to my provider, they have checked port is coming in to me but not getting through to vm, and now i cant login to ha via ip... so completly stuck.... any suggestions please

nova wind Mar 31, 2020, 12:43 PM

#

@fast summit Not sure what was going on last night....but it started working after about 2hrs

dense valley Mar 31, 2020, 2:12 PM

#

Really sad to see PiHole go... just sayin

plain rune Mar 31, 2020, 2:53 PM

#

i'm trying the move from pihole to adguard. any recommended sources for block lists?

sly kindle Mar 31, 2020, 4:55 PM

#

@dense valley you can still use it. But apparently trying to maintain it as an addon sucked

#

@plain rune these are good to start with https://kb.adguard.com/en/general/adguard-ad-filters

#

Pick one, click on "View all the rules", then add that url to your filter list

plain rune Mar 31, 2020, 5:09 PM

#

have you found those necessary in addition to the Simplified list?

latent marten Mar 31, 2020, 5:47 PM

#

I have a dumb question...I added the file editor extension, and browsed to my configuration.yaml file there....it shows 16 lines, but I have added a handful of integrations (all via the UI), so I know there should be more lines in the file. Why am I not seeing everything?

sly kindle Mar 31, 2020, 6:29 PM

#

@latent marten integrations added from the UI don't use yaml. They end up as json files in the hidden .storage directory in your /config directory

#

So your yaml integrations are yaml. Your UI integrations are...UI

latent marten Mar 31, 2020, 6:30 PM

#

Oh interesting, that makes sense. I figured the UI was writing things to the yaml.

sly kindle Mar 31, 2020, 6:31 PM

#

With things like packages or splitting yaml into files, which users can do any way they like, adding it there would be difficult

main minnow Mar 31, 2020, 8:25 PM

#

Hello all togehter. i just started with home assistant and i am rlly not the programmer guy. i am only good in copying from the web. okay, maybe not "good". i have some gosund switches flashed with tasmota. the tasmota switch is regarding to the logs also connected with mqtt broker. but i dont find the switch within devices. i am searching the web for 2h now and still have no clue. could maybe someone give me a hint, where i find the answer?

main minnow Mar 31, 2020, 9:32 PM

#

okay, i see i need to write it myself whithin the configuration.yaml. but cant find all the expressions i need...

sly kindle Mar 31, 2020, 9:40 PM

#

unless you want to use tasmota setOption19 to make it discoverable

main minnow Mar 31, 2020, 9:42 PM

#

can i do this within tasmota?

sly kindle Mar 31, 2020, 10:02 PM

#

is it just a simple switch?

#

yes this is set on the tasmota console, if you need to add specifics then entering it manually would be what you want

main minnow Mar 31, 2020, 10:07 PM

#

yeah only a simple switches (Gosund SP 112) with two integrated USB ports

#

you can switch them seperately from the regular socket

#

i checked some youtube tutorials and tried to copy they onfiguration.yaml. but it seems that they are outdated (for example https://www.youtube.com/watch?v=4H8ALCaAb-I) 😕

sly kindle Mar 31, 2020, 10:30 PM

#

@main minnow did you enable discovery when you added the mqtt integration?

tender fractal Mar 31, 2020, 10:30 PM

#

Anyone know where I can check logs to see what's failling on this? I tried to install/start Node-Red in hass.io. It installs. I refresh and start and it says it's started but I get an error when I try to open the UI...if I refresh again I get the option to start it....so...it's starting, then immediately stopping. 😦

sly kindle Mar 31, 2020, 10:36 PM

#

@tender fractal supervisor > system page show anything?

#

that's where you check if an addon doesn't install, start, etc.

tender fractal Mar 31, 2020, 10:38 PM

#

just this:

20-03-31 22:37:06 INFO (SyncWorker_5) [supervisor.docker.interface] Clean addon_a0d7b954_nodered application
20-03-31 22:37:16 INFO (SyncWorker_5) [supervisor.docker.addon] Start Docker add-on hassioaddons/node-red-amd64 with version 6.1.4
20-03-31 22:37:26 INFO (MainThread) [supervisor.api.security] /host/info access from a0d7b954_nodered

#

but when I refresh the add-on page it says it's not started

#

do I need to restart after install?

#

...nevermind...I forget I need to scroll down on the add-in page. I need to setup config I believe

oblique quail Mar 31, 2020, 10:43 PM

#

Hey guys and gals, Trying to setup the custom card for Spotify, added the extension to Lovelace, created the custom card, and gor the UI up, registered duckDNS and installed the extension, created an app in developers. Spotify.com and added a callback link according to the format mentioned in the GitHub page. But still I'm getting an error message when trying to authorize my app by logging in to Spotify from the card. Any ideas?

#

I can access my HA server through the duckdns address, but when I'm trying to connect to the UI for HA by adding :8123 to the url, i get "connection refused". Any ideas?

simple apex Mar 31, 2020, 11:22 PM

#

Hey guys just setup HA and I'm trying to setup the SSH add-on with a key. But I'm getting an Invalid YAML error when I paste in my key. What's the formatting for this?

sly kindle Apr 1, 2020, 3:04 AM

#

@oblique quail what port did you forward?

#

@simple apex

📎 unknown.png

#

that's the result of pasting the key

unreal girder Apr 1, 2020, 7:58 AM

#

is there anyway to get home assistant to execute a custom binary dropped in to the /config folder? everything ive tried comes up with errors, even when i access the console via portainer

#

using full paths / permissions 777 etc. it refuses

#

hm ive just realised it may be due to it being the wrong type of binary for the base os

#

yep thats it.. alpine. thanks for listening to my ted talk

nimble kraken Apr 1, 2020, 10:49 AM

#

i'd like to have a proxy within my hassio machine that redirects to services on the hassio machine and others to another machine in the local network, is this possible and how?

sly kindle Apr 1, 2020, 1:28 PM

#

@nimble kraken Do you mean one HA to another HA?

rich pebble Apr 1, 2020, 1:33 PM

#

Hello,
has someone the same bug in the home panel add-on?:
Install Home Panel from Add-Ons, create Account and setup HomeAssistant.
In the Notifications in HA a login failed. After a relogin i must bind HA again into Home Panel every time....
Home Assistant Version 0.107.7
Home Panel Add-On Version 1.7.0

sacred adder Apr 1, 2020, 3:16 PM

#

what server address should I be using to connect via ssh? Having trouble connecting to my ha instance

#

have a hassio install on a pi.

sly kindle Apr 1, 2020, 3:22 PM

#

@sacred adder did you configure the ssh addon?

sacred adder Apr 1, 2020, 3:23 PM

#

yeah. I just redid my install and I used to have it working

#

have the ssh add on running

#

trying to connect via cyberduck

#

should the server just be: homeassistant.local or something else

#

i think thats where im doing something wrong

sly kindle Apr 1, 2020, 3:24 PM

#

ip address

sacred adder Apr 1, 2020, 3:25 PM

#

tried that getting login failed

sly kindle Apr 1, 2020, 3:26 PM

#

which ssh addon did you configure

sacred adder Apr 1, 2020, 3:26 PM

#

Terminal & SSH

sly kindle Apr 1, 2020, 3:26 PM

#

there's the official and the community

#

ok that's the official which uses "root" as the user

sacred adder Apr 1, 2020, 3:28 PM

#

yep doing that

#

so im trying to swithc over from my old pi to a new setup im doing a clean install with

#

i have my current pi runnig as well. and I can connect via ssh fine to that.

#

is there an issue with having both up at the same time?

sly kindle Apr 1, 2020, 3:29 PM

#

not if you're using ip address

#

ssh root@192.168.1.248 for example

sacred adder Apr 1, 2020, 3:29 PM

#

whats the easiest way to find the ip, to verify im using the right one

sly kindle Apr 1, 2020, 3:30 PM

#

router administration is one place

sacred adder Apr 1, 2020, 3:31 PM

#

theyre both on the same switch, and I just realized I dont think I can get an IP per port

#

nvm, figured out the IP of that device but still getting connection error

nimble kraken Apr 1, 2020, 3:43 PM

#

@sly kindle no, just another host... various services...

sacred adder Apr 1, 2020, 3:47 PM

#

ok fixed it. had to restart the add on for some reason

gentle saffron Apr 1, 2020, 4:35 PM

#

hello all how would one open up a new port to an addon

coral parrot Apr 1, 2020, 4:40 PM

#

Is it possible to see the full log of an Add-On? I'm trying to use the "Check Config" addon, but the output is very long (as it dumps a big part of my config to the log) which truncates the output making it not possible to see what the actual error is

sacred adder Apr 1, 2020, 6:44 PM

#

or it will start briefly, ill go to webui and get bad gateway. then ill go back to the settings and its stopped

cosmic vortex Apr 1, 2020, 7:07 PM

#

Hello all

#

Hello. CAn some help. Official addons coming up as unknown. URL correct and linked, but no addons are listed. The community addons work

cosmic vortex Apr 1, 2020, 7:29 PM

#

this is the log:20-04-01 19:27:30 INFO (MainThread) [supervisor.store.git] Remove custom add-on repository https://github.com/home-assistant/hassio-addons/
20-04-01 19:27:31 INFO (MainThread) [supervisor.store] Load add-ons from store: 48 all - 0 new - 0 remove
20-04-01 19:27:34 INFO (MainThread) [supervisor.store.git] Clone add-on https://github.com/home-assistant/hassio-addons/ repository
20-04-01 19:27:42 ERROR (MainThread) [supervisor.utils.json] Can't read json from /data/addons/git/d631efa0/repository.json: [Errno 2] No such file or directory: '/data/addons/git/d631efa0/repository.json'
20-04-01 19:27:42 WARNING (MainThread) [supervisor.store.data] Can't read repository information from /data/addons/git/d631efa0/repository.json
20-04-01 19:27:43 INFO (MainThread) [supervisor.store] Load add-ons from store: 48 all - 0 new - 0 remove

gentle saffron Apr 2, 2020, 3:22 AM

#

trying to create a local add on using hassioaddons/ubuntu-base:5.0.2 as the base but doesnt seem to have bashio

#

this is the error i get
exec: fatal: unable to exec bashio: No such file or directory

chilly citrus Apr 2, 2020, 4:26 AM

#

Having issues with Git Pull

#

no matter what I do, it will continue to stop running, how do I get this to keep running? Anyone else with this issue?

crude sable Apr 2, 2020, 5:38 AM

#

Are there any prompted scripts and/or google assistant manual config modern tutorials?

dark yoke Apr 2, 2020, 10:44 AM

#

Check your line endings @gentle saffron , it has to be LF, not CRLF

dusky mural Apr 2, 2020, 12:51 PM

#

Hi all does anybody know how to get updates for installed add-ons shown in the gui again? For me available updates of installed add-ons are not shown (latest released version of HA)

timid urchin Apr 2, 2020, 1:19 PM

#

I'm having difficulties setting up the Terminal & SSH addon with using keys for auth. Anyone had success with this ?

sly kindle Apr 2, 2020, 1:49 PM

#

@dusky mural did you reload the add-on store using the icon in the upper right of the page?

dusky mural Apr 2, 2020, 1:49 PM

#

Let me try that

#

Just reloaded but seems to be still the same and i can remember if i am not wrong that if there was an update for any installed add-on it was indicated on the dashboard tab

dark yoke Apr 2, 2020, 2:50 PM

#

@dusky mural Glanses does not have an update (and are not running), NetDaemon has an update (see the colored bar in the top of the card)

📎 unknown.png

dusky mural Apr 2, 2020, 2:52 PM

#

@dark yoke Aaah ok. that seems to make sense 🙂 Thanks!

timid osprey Apr 2, 2020, 3:45 PM

#

hi, been advised to setup SSH and getting confused by the last steps

#

I have generated keys, and copied it,

#

I guess I past it into the config area and click save

#

it then says to open port 22, but config says disabled, do I change this - and what to?

#

Thanks all

sly kindle Apr 2, 2020, 3:48 PM

#

there's a web ui terminal and then if you want to connect using a client, yes, you want to enter 22 there

timid osprey Apr 2, 2020, 3:50 PM

#

So do i start openssh? After saving the key in the config bit?

sly kindle Apr 2, 2020, 3:50 PM

#

the start button up top, yes

#

then watch the logs

#

below

timid osprey Apr 2, 2020, 3:51 PM

#

i get SSH port is disabled. Prevent start of SSH server

sly kindle Apr 2, 2020, 3:51 PM

#

📎 unknown.png

#

did you enter it there?

timid osprey Apr 2, 2020, 3:51 PM

#

but now have open web ui

#

no left as disabled

sly kindle Apr 2, 2020, 3:52 PM

#

you'll want to enter 22 there if you also want to use something like putty

#

Handy for when you lose access to the frontend and need to troubleshoot

timid osprey Apr 2, 2020, 3:53 PM

#

will stop it and do that

sly kindle Apr 2, 2020, 3:53 PM

#

Hopefully that doesn't happen, but...it happens

timid osprey Apr 2, 2020, 3:53 PM

#

ok now have listening on port 22

sly kindle Apr 2, 2020, 3:55 PM

#

this isn't ssh access to the host. It is a container which provides the custom commands for checking logs, checking config, etc. And it provides access to the default directories, nano editor...but not access to the underlying host

#

(just so you know)

timid osprey Apr 2, 2020, 3:56 PM

#

was advised to install it by tinkerer as am struggling with mqtt setup

sly kindle Apr 2, 2020, 3:57 PM

#

mosquitto addon?

timid osprey Apr 2, 2020, 3:58 PM

#

yes

sly kindle Apr 2, 2020, 3:58 PM

#

it's more simple than people expect

timid osprey Apr 2, 2020, 3:58 PM

#

cant get any devices to add

#

only have one... at the moment

#

and cant find that...

sly kindle Apr 2, 2020, 3:59 PM

#

what's the device?

timid osprey Apr 2, 2020, 4:01 PM

#

sonoff t2uk3ch flashed with tasmota

#

setupmas t1 3ch...

#

ok, so have ssh setup i think, how do i use/

#

if i click open web ui, i get Terminal & SSH but nothing else...

sly kindle Apr 2, 2020, 4:05 PM

#

📎 unknown.png

#

you don't see this?

timid osprey Apr 2, 2020, 4:05 PM

#

No

#

just the top blue line

#

do i need to restart ha?

sly kindle Apr 2, 2020, 4:06 PM

#

no

#

but try clicking the back arrow and then "open web ui" again

timid osprey Apr 2, 2020, 4:07 PM

#

the same as before

#

clicked restart, checked log, and tried again. Still the same

sly kindle Apr 2, 2020, 4:09 PM

#

different browser, odd extension, not sure...

timid osprey Apr 2, 2020, 4:13 PM

#

this is my log

dense spadeBOT Apr 2, 2020, 4:13 PM

#

@timid osprey posted a code wall, it is moved here --> https://paste.ubuntu.com/p/HwdkPF39vw/

timid osprey Apr 2, 2020, 4:14 PM

#

when I pasted the key into the config area - I removed the sq()

#

is that correct?

sly kindle Apr 2, 2020, 4:17 PM

#

the sq() ?

#

📎 unknown.png

#

it should be all on one line. when you paste it, it will probably end up looking like that

#

you can try without a key and use a password instead

#

But really...not sure how ssh is going to help you with mqtt

#

Sounds like you need to configure your device to connect to your broker

#

the web ui doesn't need key or password anyway

#

but I think you need to fill one or the other for the addon to start

timid osprey Apr 2, 2020, 4:20 PM

#

how do you screen shot that bit and I will do mine

#

but looks the same

sly kindle Apr 2, 2020, 4:21 PM

#

you just paste it

#

for now, remove the key. enter a password. restart the addon. see if the behavior is the same

timid osprey Apr 2, 2020, 4:23 PM

#

did this

#

authorized_keys: []
password: '1234'

#

restarted

#

opened web ui

#

still the same

#

nothing seems to work for me lol

sly kindle Apr 2, 2020, 4:24 PM

#

so it's something else

#

what browser is this?

#

did you try another?

timid osprey Apr 2, 2020, 4:30 PM

#

the Microsoft one that comes in win10 (edge I think its called

sly kindle Apr 2, 2020, 4:30 PM

#

got anything else?

#

chrome firefox

timid osprey Apr 2, 2020, 4:30 PM

#

not on this laptop

#

can install one

chilly citrus Apr 2, 2020, 4:31 PM

#

Having issues with Git Pull. No matter what I do, it will continue to stop running, how do I get this to keep running? Anyone else with this issue?

sly kindle Apr 2, 2020, 4:31 PM

#

@timid osprey is it the newest edge with the wave-ish looking icon?

timid osprey Apr 2, 2020, 4:32 PM

#

yes the e cut at the top

sly kindle Apr 2, 2020, 4:32 PM

#

@chilly citrus I don't use it

chilly citrus Apr 2, 2020, 4:33 PM

#

its super cool when it works, I prefer to have all config in code and on GH but the addon wont stay on, super annoying, so when i push, i have to click start every time, then it will pull

#

no errors in the log

timid osprey Apr 2, 2020, 4:33 PM

#

just loaded chrome, logged in to HA, and pressed open web ui and it works

#

This is why I use a MAC for work....

#

so have the HomeAssistant logo

#

$ ha help

#

~ $ box

sly kindle Apr 2, 2020, 4:35 PM

#

like I said, not sure how this is going to help with your mqtt issue, but it's good to have it anyway

timid osprey Apr 2, 2020, 4:36 PM

#

thanks for your help

#

will put the key back now and try it again

sly kindle Apr 2, 2020, 4:37 PM

#

@timid osprey https://i.imgur.com/BewTcRh.png I use discovery for the majority of my tasmota devices. works well

timid osprey Apr 2, 2020, 4:39 PM

#

think that is what we were trying to set up with tinkerer, but he wanted to check something so wanted terminal and ssh

#

so how did you turn on auto discovery?

sly kindle Apr 2, 2020, 4:41 PM

#

did you check the box when setting up the integration?

#

on the integration UI page?

timid osprey Apr 2, 2020, 4:42 PM

#

there is no setting for this?

sly kindle Apr 2, 2020, 4:42 PM

#

btw, if you want to use edge use the newest one. https://www.microsoft.com/en-us/edge

#

do you have mqtt in your list of integrations ?

#

📎 unknown.png

timid osprey Apr 2, 2020, 4:44 PM

#

ignor that

sly kindle Apr 2, 2020, 4:44 PM

#

too late. memorized

timid osprey Apr 2, 2020, 4:44 PM

#

lol

#

Yes have Met.no:Home

#

Mobile App: my Iphone

#

MQTT:Mosquitto broker

#

this is on the Configured page

sly kindle Apr 2, 2020, 4:45 PM

#

click on the broker, and then trash it from the upper right corner, then restart HA

timid osprey Apr 2, 2020, 4:46 PM

#

restart from server controls?

sly kindle Apr 2, 2020, 4:46 PM

#

yep

timid osprey Apr 2, 2020, 4:47 PM

#

doing it now

sly kindle Apr 2, 2020, 4:47 PM

#

when it comes back up, go back to integrations and mqtt should appear at the top, waiting to be configured

#

(again)

timid osprey Apr 2, 2020, 4:47 PM

#

now have MQTT under Discovered and a Configure option

sly kindle Apr 2, 2020, 4:48 PM

#

and when you do that, you should see a checkbox for discovery

timid osprey Apr 2, 2020, 4:48 PM

#

Clicked enabled discovery

sly kindle Apr 2, 2020, 4:48 PM

#

good

#

now you need to enable it on your tasmota device

timid osprey Apr 2, 2020, 4:48 PM

#

Have to go now - daughter is home

#

Thanks for your help - to now, hopefully I will get somewhere now

sly kindle Apr 2, 2020, 4:49 PM

#

in tasmota you go to the console and enter setOption19 1

timid osprey Apr 2, 2020, 4:49 PM

#

will try that

sly kindle Apr 2, 2020, 4:50 PM

#

assuming your mqtt settings on that device are also correct, it should eventually appear in your HA integration

timid osprey Apr 2, 2020, 4:50 PM

#

think they are as I could see them in Mqtt stuff in the tasmota console earlier

sly kindle Apr 2, 2020, 4:51 PM

#

sounds good then. all that might be missing is that setoption

timid osprey Apr 2, 2020, 4:52 PM

#

hope so

#

will try later when my daughter is in bed...

#

she bugging me now to sort out some batteries in a toy

#

thanks again

humble palm Apr 2, 2020, 4:58 PM

#

Hi Guys.

#

Does anyone know how to reset the Bitwarden admin token?

timid urchin Apr 2, 2020, 5:11 PM

#

https://i.imgur.com/1rjJWtA.png not sure what I'm doing wrong (Terminal & SSH addon) 😓

sly kindle Apr 2, 2020, 5:11 PM

#

@timid urchin https://ptb.discordapp.com/channels/330944238910963714/672220642099200000/695305865888268379

timid urchin Apr 2, 2020, 5:12 PM

#

so my indenting might be wrong?

gusty laurel Apr 2, 2020, 5:12 PM

#

Hey Guys, trying to use official MariaDB addon. Created config with user and password and database, getting errors "2020-04-02 20:08:55 31 [Warning] Access denied for user 'hasseris'@'172.30.32.1' (using password: YES)" looks like add on does not create a correct user. Does that happened to anyone?

sly kindle Apr 2, 2020, 5:13 PM

#

when I paste the one single line it just kind of took care of that if I recall

timid urchin Apr 2, 2020, 5:13 PM

#

thanks, ill try to format it like yours or paste it once more

#

weird if thats the case, the config example is wrong then

humble palm Apr 2, 2020, 5:14 PM

#

Does anyone know how to reset the Bitwarden admin token?
@humble palm

sly kindle Apr 2, 2020, 5:14 PM

#

I don't.

#

you've got the issue submitted though, correct?

humble palm Apr 2, 2020, 5:15 PM

#

I have

#

was wondering if anyone here knows 🙂

timid urchin Apr 2, 2020, 5:17 PM

#

tried to both format the lines manually, and to paste the public key again. still doesnt work

sly kindle Apr 2, 2020, 5:17 PM

#

@gusty laurel what does your config look like?

timid urchin Apr 2, 2020, 5:17 PM

#

guess ill try again tomorrow, perhaps generate a new key. thanks tho @sly kindle

sly kindle Apr 2, 2020, 5:17 PM

#

what are you generating with?

timid urchin Apr 2, 2020, 5:17 PM

#

puttygen

sly kindle Apr 2, 2020, 5:18 PM

#

you need to copy the key out and paste it

#

don't use the button

gusty laurel Apr 2, 2020, 5:18 PM

#

@gusty laurel what does your config look like?
@sly kindle simple as it can be

timid urchin Apr 2, 2020, 5:18 PM

#

i copied the key from the file saved by puttygen

gusty laurel Apr 2, 2020, 5:18 PM

#

https://pastebin.com/CT2ybNMn

sly kindle Apr 2, 2020, 5:18 PM

#

@timid urchin yeah don't do that. copy it directly from the window

timid urchin Apr 2, 2020, 5:18 PM

#

oh

sly kindle Apr 2, 2020, 5:18 PM

#

different format

gusty laurel Apr 2, 2020, 5:18 PM

#

OK, sorry, now I see

timid urchin Apr 2, 2020, 5:18 PM

#

oh

#

okay, ill try. thanks

golden drift Apr 2, 2020, 5:19 PM

#

Hi,
I am struggling to figure out how to use the SSH add-on. The port is now always disabled and I don't know what the "host" value should be. I did look at the docs and can't find an answer.
https://tinyurl.com/trl5tc3

sly kindle Apr 2, 2020, 5:19 PM

#

@gusty laurel you have to give rights to "hass" in your example

#

  - homeassistant
logins:
  - username: homeassistant
    password: '!secret mariadbpw'
rights:
  - username: homeassistant
    database: homeassistant```

#

@golden drift enter 22 there

dark yoke Apr 2, 2020, 5:20 PM

#

https://www.youtube.com/watch?v=AgFeZr5ptV8

timid urchin Apr 2, 2020, 5:20 PM

#

@sly kindle do you by chance remember if puttygen should be set to "SSH-1 Key (RSA)" or "SSH-2 RSA Key" ?

sly kindle Apr 2, 2020, 5:21 PM

#

I've been using RSA

timid urchin Apr 2, 2020, 5:21 PM

#

ok

sly kindle Apr 2, 2020, 5:22 PM

#

https://i.imgur.com/lqH6mpD.png

Imgur

#

thanks @dark yoke

gusty laurel Apr 2, 2020, 5:22 PM

#

@gusty laurel you have to give rights to "hass" in your example
@sly kindle yup, I know, just lost in my config/paste example. Changed now and still getting errors. If I understand correctly, container executes script to alter privileges ([20:19:20] INFO: Update user hass
[20:19:20] INFO: Init/Update rights
[20:19:20] INFO: Alter rights for hass to homeassistant)

#

but then again, I'm getting Access denied errors.

sly kindle Apr 2, 2020, 5:23 PM

#

what do you have in recorder: ?

gusty laurel Apr 2, 2020, 5:23 PM

#

db_url: mysql://hass:jka901kabn3kAh401"@core-mariadb/homeassistant?charset=utf8

sly kindle Apr 2, 2020, 5:23 PM

#

the user/pass matches?

#

ok

timid urchin Apr 2, 2020, 5:23 PM

#

bah still no success 😦

gusty laurel Apr 2, 2020, 5:25 PM

#

reinstalled and copy-pasted from here. testing now

#

nope, no luck here

golden drift Apr 2, 2020, 5:28 PM

#

@sly kindle - That was simple and worked. I wish the field was documented explaining what it is looking for. I could not understand and though it wanted something like "localhost".

gusty laurel Apr 2, 2020, 5:28 PM

#

put everything here https://pastebin.com/wFRpRUWu

#

I'm missing something for sure

sly kindle Apr 2, 2020, 5:29 PM

#

@golden drift you can put whatever port you want in there

#

but it used to default to 22 in the past. now defaults to user choice

#

and all the other addons have this too

golden drift Apr 2, 2020, 5:29 PM

#

yes but it being named host port might make it more clear

sly kindle Apr 2, 2020, 5:29 PM

#

well, the ones with a port available

timid osprey Apr 2, 2020, 5:55 PM

#

so had a few moments to try some stuff...

#

still no joy but have found this in my log