#the-water-cooler
1 messages · Page 779 of 1
if I could just get the fiber directly into my switch I skip a whole box and POF
Also built in battery backup
with how I tend to lose data:
s/box/brain/
there are some mini fiber to ethernet modules on ali, never bothered to look too deep into it either I think you have to get the exact protocol and passive/active for it to work
my ISPs fritzbox never hang up on me so far, it only does the fiber -> ethernet job though. disabled anyhing else
I asked here whether it’s worth bypassing the nbn NTD, friend said not worth it. Offers limited benefit and the NTDs are decent anyway
maybe i should finally do ccna too
For me the ONT is physically registered by the provider. So if I change the ONT I have to register the new one with them and they won’t accept anything that has to be something they know/sell. My current box has an integrated ONT chipset so it’s better than before but be aware that you can’t do much if they don’t approve your installation.
I read Fritz and i was all like "yeeeaaah". those are some good (home) routers. I use pfsense, but anytime i can, i recommend buying fritz!box than tp-link or such
Juri my man

From the Family Guy episode Lawyer Guy
(Season 20 Episode 13)
the nikes on my feet keep my cipher complete
Nice, 1.1eur per kwh tomorrow with tax included
To fuel the car or what do you mean
What
HWAT
Our diesel is up to 25,47kr a liter now
putin deez nuts
Ooof I've seen 22.94 for 95
Wonder what Americans will do when their gas hits $4 if they stop imports now
We in California have been training for this for years
What is the price there now?
When i moved to Oslo in 2007 i paid $1.03 per liter, now it is $2.48
Cheapest i can ever remember from the early 90s was $0.80
Diesel is 2.55 a liter here
Kinda desperate for the hybrid now
But I only pay for a fraction of my travel, thankfully
was just under $5/gallon when I filled up at Costco last week, and I'll bet it's over $5 now
I've never seen $6/gallon, so that would be a milestone
Orly
It was $2.30 per gallon when I was in the us last
In... 2020
That was Georgia though
And was 1.90 in new York when I was there in 2016
Saw this the other day
Diesel is approaching $2/L AUD here - up from $1-1.20 a year or so ago
Power prices are currently so high the tesla users are having almost the same price as petrol users to top up

shieet
I remember gas was at one point .90 in Georgia.
Right after the great war you say
Naw….prob 80/90s
Funny, I don’t really pay attention to gas prices. Kinda like a necessity. Oh, and a work car 😜
@tidal bronze did you ever end up with a good rain/moisture sensor solution?
@green inlet it was mid/upper $.80 level when I started driving
Soil moisture is a headache. Have some test ones going on for months.
what about rain?
Lowest I remember is 74c/gallon in Georgia/Alpharetta. Early 90s
I think Georgia had the cheapest gas in the nation at that point for some logistical reason
Rob, you have some southern blood in you, do you?
I lived around Atlanta from 1987-2003
Nice.
high school, grad school, work
Aren’t you in Cali now?
Dunwoody, Georgia Tech, Alpharetta, Woodstock
cool
@dawn prawn i see a very sexy plaid
always fun driving up to a gas station in the Tesla to run inside for a snack
The Finest City
Ay?
Man i hope they turn em into charging spots.
they'll be incredibly short-sighted if they don't start doing that now
Nicely located, with amenities
Am I missing something? Just a pic I saw on the internet
Im an optimist at heart, but man i really thought we'd see stuff moving faster
The car in the picture, the black one, is a tesla model S plaid
Just thought it looked nice
Ahhh haha sorry - I just thought it was a Model S - didn’t know there was plaid
3-motor version
could be a normal S with 2
Yea. Its the 2021 refresh
Most gas stations in Norway have had charging spots for years now, makes a lot of sense
Might rent (if possible) when i have a license
Too bad Teslas are shit at ride comfort though
What model?
All tbh
LIES
How come? All i've heard & seen say that the air suspension models have great comfort. The none suspension ones are good to OK.
obv cant verify irl. But than again thats what science is for
No idea, probably some of the shittiest cars I've driven in ride comfort, cars feel cheap too
But what do I know with 20 years of driving and a couple of dozen different rentals a year
strange. I mean i get the panel gap saga (suprise suprise, no one cares), but from what i've heard they're at least OK
i mean the air suspension's off the shelf, so i dont see how it could be much worse.
i've been along for a road trip in a 3 and it was fine.
My old 2000 Audi A8L was miles ahead of the 2019 Tesla model S i got for rental
(3 doesnt have air sus)
The plastic feeling of Tesla doesn't help either, and the seats are shite
As a premium car it should match other premium cars, or better
It just doesn't
well im happy to tell you that the 2021's dont have much for plastic and even better air suspension. So maybe they'll be good for you idk
It's fun to drive, but that is only interesting of you are 14 years old
A8L Audi top of the line version compared to an tesla 😹
Tbh, I was more satisfied with the last ID3 i rented than the Tesla model s I've driven
Damn lol
20 years difference should matter, and list price is the same
well i'd say your def an edge case. Ppl usually praise teslas air suspension and front seats
the post 2016 front seats.. that is.
Yeah could i say with my car too, 34 years should make a difference but its made for 500tkm what is not the case anymore
500k km?
Fully galvanized body is something you barely see today also
I had 410.000 on the A8L when i got rid of it, the V6 Audi's are quite long lived
My old audi 100 had 480
Audi 100 c4 was made for 700tkm if i am not mistaking
Now I only drive 15000 a year, compared to 40000 a year previously though
@shadow prawn the post 2017 model teslas are explicitly designed for 600k miles of operation without significant maintenance. By significant i mean powertrain.
Yeah thats an electric car so not very difficult
Very true
How nice, good thing my colleague only has had the engine changed twice in under a year then
500k km on an ICE is pretty amazing
imagine having N be 1

Yeah, everyone I know that had a tesla between 2016 and 2018 replaced at least engine once
Depends on specific power output
So quality,not so great
Hell they delivered one without a rear break pad. But again, N = 1
Had a friend now have his 3 in for service because the heat pump thingy didn't work, only took 4 weeks for Tesla to get the parts, but he was driving a rental x the whole time and now he wants to upgrade
Worse with tesla is, you cannot change anything by yourself everything has to be registered by Tesla
Apple tactics
The local Tesla shop up at my fathers place usually has 10-15 Tesla's waiting for parts at any given time, they have more cars waiting for repairs than for sale 
To be clear, "explicitly designed for" does not mean "it will". It just means that they put a lot of effort into maximizing the probabillity of it lasting 600k+ miles. I wouldnt expect a model to last that long as issues with new technologies always creep up on ya, how ever many lab tests you run.
But the trend clearly points to pretty extreme reliability, which is improving dramatically over time.
There are some teslas that have over 1m km
Ironically they dont market it
anyways, "i had this irl friend" and "i had that irl friend" wont cut it my friend. Big data will. And the data is unequivecally indisputable
I think i botched that spelling lol
Yea... really shitty
There are some of these that have reached 1m km too 😂
wish they didnt fuck the customer on that front
I can only go on personal experience, and when I know 20+ people with Teslas 
I did want a S at one point
And then you saw it already turned to dust?
Nah, i went for the A8L
They rust faster than police allows

None the less, your point is a valid one. I mean the amount of utter crap engineering that went into the cars from 2012 - 2017 was pretty meme worthy.
luckily its behind the company now
The quality has improved drastically Since moving production to China it seems
Especially doors and fittings
I almost bought the Hongqi e-hs9 when I bought the XC90, i still believe hybrid is better for me than full electric
the 2022 models from the new factories are above and beyond. Something you can look at and finally know we're enterd the 21 century.
and they're rated for 1 million miles.
Do you drive a Tesla?
again, the first units are gonna have issues, like any other radically new technology taking a gigatic leap forward
Me? No. Im just an engineer. A nobody
Oh
Eventually il buy one
Engineer is a bold statement for someone not old enough to drive
Correct. I should clarify before confusion insues
Dont you think you should drive one as your daily driver before recommending it ?
not an engineer as in went to school bla bla etc. I mean an engineer as in i learnt the stuff myself and like tinkering. Have made a bunch of shit over the years, both bad and terrible.
some good. Very rarily.
i dont recommend anything. I present the data as is. Naked, unbiased.
you decide whatever you wanna belive or drive
Driving is not data driven it's an experience.
and i didnt comment on the driving experience?
I was talking about the engineering
the stuff i know, and better yet, the stuff i've got data on
So what you are saying is food must be good or bad depending on the label. Ok 👌
No. What im saying is that i love engineering and i marvel at the art work of the new teslas
9/10 dentists recommend cavities
thats all. Thats it.
Now you might not marvel at the engineering, and thats fine.
i wanna be deadly clear here so as to not cause confusion. Im NOT endorsing or recommending anything
I value products (marvel or not) on service and support. Everything that falls through the cracks is shit
The service and support is pretty shit
so i agree
sadly :/
It really breaks my heart to say it. The cars are (according to me) works of art (from the inside). But they ruin a lot of the fundamental good with poor service & support.
None the less i still love the company. When the support/service works it works great, but its hit & miss. Thats my one biggest wish. Fix the damn service/support.
Love the product not the company
Panel gaps do matter. And people do care. If you’re spending that much on a car, as atx said, should be a premium experience. Not something you could expect with a base model Toyota Yaris
Teslas are just an electric car on a shitty body with interesting repair techniques such as the apple method
As soon as teslas can make it to 20+ years old without having to have motor or battery replaced then they’re comparable to an ICE
@crisp sapphire when you get a chance try their solar as well. I have a service ticket from May 2021 that's yet to be resolved. 😆
i agree to an extent. While they do matter, they (contrary to populaf belif) arent as terrible as they're made out to be. I mean the order backlog speaks for itself.
Anyways, panel gaps and other general quality stuff should dramatically improve with the 2022 models. I said should, we shall see.
we simply disagree
¯\_(ツ)_/¯
People complain about issues, others still buy the product. A lot of people don’t realise just how bad quality control is for teslas
Who is we?
us two
I actually cannot say anything about how bad/good the quality is beyond my own assumptions. Simply not enough data. It could be real bad it could be real good. Afaik the internal data ses things are improving, but it could also be that the data is false.
The complaints are going down according to internal QA metrics.
but again, probs not super accurate
They update the internal metrics with line updates and other internal software. Its a hell scape lol
And how are you getting internal metrics
employees
i mean i dont work there (Thats the end goal). But i've been following the company for so long that i know a number of employees. Some are old friends who just so happened to get work at tesla, some are from twitter.. etc.
All verified ofc. And cross verified
it sounds juicy, but really the intel is super mondaine.
Like line updates, parts changes, a lot of fsd beta stuff (mostly uninteresting), various company projects and stuff
Oh and battery stuff. But thats on panasonics side so its nothing special. Just normal industry practices like how they do calendring of cells and diff QA testing software stacks
So basically your only defence of the company is what employees tell you. Who also may be protected from telling you anything truthful
no. Thats useful and all but its a tiny drop of whats going on. Do i seem that stupid to you?
but its still data worth considering.
i mean i've known these guys (old friends, now employees) for at least 8 years.
the really hard part is coorelating the data. Gathering public info and stitching stuff togeather to get an idea of whats going on. Like with the lithium ion "12V" battery on the new S/X. The only evidence i had of its existence was a year before production start in the form of a pic off'f the prototype line where they we're doing LV integration with the PCS
And than i had to search through patents and talk to a bunch of ppl to figure out what was going on.
and even than i thought it was an LFP pack until i got some paper work with specs. Its actually LINCAO.
So well and truly.. do not trust what i say. Im wrong 99% of the time.
No but you seem like someone young who has taken a company on as their idol and ignoring any possible flaws. If you want a fully well rounded view you need to accept the shitty practices and also look at alternatives. Given every other car manufacturer will be electric in the next few years to decade
Yea, thats totally what i do.
what part of "is pretty shit" is unclear
Sorry if im being rude. I just dont understand how you can say that.
The service, support, right to repair and many many other aspects are utter garbage
You only mention support. You said the panel gaps are no big deal (pretty much every other manufacturer at that price point has it sorted out) which they are a big deal
Like so fucking shit its funny
The internal design is terrible, who the fuck thought wipers 5 menus deep was safe
throw in panel gaps as well. It took em 7 years to finally fix it
Yea... i'd fire that engineer
As soon as Tesla can prove they have a car that can survive 300,000kms and 20 years without needed more than $2k in a single repair then they’re on par with other manufacturers
I just dont agree that its all shit. I belive the vast majority is good/great. But i do not, under any circumstances think that delivering a car without break calipers (happened, twice) is acceptable
in the spirit of low sample sizes:
There have been many cases of owners driving they're old ass model s's for like 500k miles without much service.
i wouldnt expect em to last that long. But the fundamental physics ses its better in every way.
Well.. almost.
i think teslas impact report might also be somewhat of a decent source for that sort of stuff
you know, i think i'd enjoy some VC time with a few ppl from this server. Would make for interesting convsations.
Hopefully one day
Look how many older cars you can see on the road, still plenty older than 15 years. So far not many teslas older than 5. Will be interesting to see it continue or whether it'll just fail
There was a "Winter car 2022" test in a Finnish paper a few days ago. Tesla Model Y ranked last of the six cars tested. I'm not a car guy myself, but apparently these aren't really designed for the Nordic weather.
cold weather and batteries aint friends
also a heavy car is probably not the best on slippy roads
Batteries were a strength actually. It was the driving and heating that got negatives
I didn't read the test though so can't be sure what the issues were
Again i just dont agree here fellas. Every other (none biased, properly done) test i've seen + the engineering which is the fundamental factor point to it performing great. I mean just look at the pack insulation and its pretty hard to argue that even 500W of heat wouldnt keep that thing above 15C
just Electric
Honest question, do you notice your own internal biases
they should have compared it to a renault twizzy just for jokes
Sadly there we're some heatpump faliures, which are actually still going on rn, which tesla is fixing. So yea not good over all i'd say
You think tesla can do no wrong in terms of quality
^
i literally just said faliure
If that aint shooting ones bias in the foot, idk what is
i think tesla is great at making electronics for their cars, but suck at assembling it all to a satisfying car
@umbral cliff like what do you actually require i do. Tell me because that'd be appreciated.
How would i possibly assert my own belif's without sounding like a broken record and biased fanboy. I've time after time agreed to this being shit and that being shit, i've went out of my way to bring up faliures (like with the heatpumps) which are continiuing to this day.
What more can i do?
State that the new UI is crap? Because it fucking is
State that not honoring early reservarion holders is a scum bag moove? Because yea, it is.
Don't barge in here trying to defend them. They're a company. Not your friend. You try and justify what they do wrong about how its being fixed, just acknowledge that its a disadvantage. If you were the CEO or the designer then sure defend your own product. Don't need to defend a company that owes you nothing and that you get nothing from
Even this statement...
"i wanna be deadly clear here so as to not cause confusion. Im NOT endorsing or recommending anything"
you said it yourself.
"A company that owes you nothing and that you get nothing from".
Your literally calling me unbiased. Not that i am unbiased.. im not. But i sure as hell dont have an angenda defending companies. Again, for the last time: engineering is what i love, engineering is what i care for.
Ha. I was going to ask you which you liked better.
Atlanta is far cheaper, but I'm not a fan of Georgia once you get too far out of the Atlanta metro area
luckily it's one of the largest metro areas in the US. Its suburbs have suburbs
Yes, we lived in San Diego for a spell, minus all the extended family being on the east coast and the cost of living, I loved it.
I've nearly lived in San Diego longer than Atlanta and I do like it here. The weather is better here nearly year round - cooler in the summer and warmer in the winter
But we just eclipsed San Fran as the most unaffordable housing in the US, so there's a price
My house price has more than doubled in 10 years, so I'm not gonna argue
then california breaks off and sinks into the ocean...
I look forward to island life
➢ 𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗡 𝗦𝗢𝗖𝗜𝗔𝗟 𝗠𝗘𝗗𝗜𝗔
FACEBOOK PAGE ➤https://www.facebook.com/Neha-Bewafa-...
TWITTER ➤
INSTAGRAM ➤https://instagram.com/neha_bewafamusi...
SNAPCHAT➤https://www.snapchat.com/add/nehabewa...
PINTEREST➤https://pin.it/6h64qgC
🆃🅷🅰🅽🅺🆂 🅵🅾🆁 🆆🅰🆃🅲🅷🅸🅽🅶
*DISCLAIMER: This Following Audio/Video is Strictly meant for Promotional Purpose. We Do not Wish...
You know the rules and so do I
Really? You're going to make sexist "jokes" like that?
https://www.home-assistant.io/code_of_conduct/ @neon flower
I did that to the rims of my wife tires, and i still get flamed for it 
One of my uni friends was a rally driver, far better behind the wheel than any of the blokes
did you blame the snow?
I blamed the kid screaming 
even better
Better than her getting flamed for you doing it
Should’ve blamed the curb instead
Got too close to the wheel
Damn curbs, get off my lawn
Havn‘t read it do it again (irony off)
You missed nothing other than somebody trying to be edgy on International Women's Day
The kind of edgy that 13 year olds think is funny
Can I say thank you for calling them out. I appreciate it, that humour is very eh
actual country girls can be a little rough around the edges lol
Why do I feel like ATX might appreciate this?
Yeah I forgot the italics and quotes lol
fans 🤢
Yes, i like your roughness
Onlyfans?
I just wanna boast, successfully moved all my HA stuff to docker, and got it working smoothly for everything, even z2mqtt and mariadb too. Very pleased with myself
First time properly using docker-compose too
And all my containers are named after fruits or vegetables
all are things you can put on a pizza
I was trying to come up with one I haven't tried, but no I think you're right. You can have all of those on pizza.
In some way or another.
What the what? Maybe 3 things in that list I would put on pizza.
Then you're missing out.
Pineapple and orange goes excellently with ham. Banana with curry, peanuts and chicken. Onion. Avocado with caviar and sour cream. Lemon in pesto with mozarella. And fries with salad and kebab meat.
Well obviously I can't spell 
But its just whatever worked for me when naming lol
Happy now 😄
Thats....horrific 
Congrats. You won’t regret it. Good stuff.
Now let me show you rclone mounted encrypted cloud storage @umbral cliff
Oh yea. And atxbyea-onlyfans
What image is that container running?
atxbyea/freakflag
Already playing with other stuff because it seems cool
Got pihole running local dns & ad blocking as a container too
I need this.
There are a lot of onlyfans containers
Also yes please show me
Backups are where I am seriously lacking.
You backup to the same drive where it’s located right 
No i dont run haos
I do images about once every 6 months 🤣

27kr a liter for diesel now @clear ferry
HAOS had my best backup strategy of all my devices, google drive backup lol
Thats mine too
My wife knows me too well
She is making homemade meatballs
And she gave me the spatula to lick clean

That was a hint of her, that you need some exercise
you are living the dream
hrmm, I forgot my coffee
Thats bad
That show had great noises.
that was the longest I've seen discord down
I just about survived by spamming on BBS forums instead
Sorry guys, my rack lost power
more like it required more power than Europe had available
great that it has power again ^^
Oberfail changed his profile picture, yay!
NANI?
go patrex!

You should invest in an UPS
is that ATX serenading Michelle?
yes!
What would you do if a tiny hand reached out of your light fixture? Yesenia Irizarry had just moved in with some friends in Brooklyn, New York, when she realized they had an unwanted visitor making itself at home. The college student heard scratching in the ceiling, trying to claw its way in. Then, a small five-fingered hand appeared, poking out...
Could be worse. This happened at my old apartment...
Upstairs neighbors left the tub running and it overflowed. Caused water damage to multiple downstairs apartments.
Using the trashcan to try and collect water was ultimately pointless >_>
that is an interesting light fixture?
Ah the classic light water feature
Dem Murica Apartments
yea marvel at indoor plumbing.. something you still lack
Nice one of my packages is now since three days marked for delivery, hope its not lost
Is this good?
Why
because autostart says red
I don't let my server autostart
i dont care about your server
Lol
You should ask folks on one of the many Minecraft Discords
True
I like how the dude in the back looks as far over in both directions as possible cause you know that is an edit with nothing to look at lol
Just contact the courier company
Now With More Penguin!
Features a live score board and goal horn when flames score.
all automated with home assistant
You probably want the Share my project part of the forum rather than this channel 😛
I could sure. lol
but thanks for looking anyways 😉
I actually don't see a share my project channel am i missing something?
You can find the community forum here
Forum... not Discord
ah.
is this AUS or GB?
Sounds more GB
that Oi and C got me confused
Yeah that sounds BRIFISH to me
Not enough "cunt" statements
and no mention of any barbies
Loving me some of that NSX goodness
Too bad the topology doesn't show BGP neighbours and routes
Networking is for the weak
Real heros manipulate the signals with magnets and space radiation
Pssh, I'll Layer7 you
The trick is the fookin/feckin and tosser
Also we would just say oi c**T rather than oi ya
Wonder how many Azure certifications I can do before summer
Attempt, or pass? 
Ah, speed resits
and every attempt is free, so I could do the same exam three times in a day if I wanted
You’ve got 12 months to do them so I hope a lot 😛
Only in bizarro land
trollololol @last cedar
27NOK for diesel now
so that'll be what, 30SEK ?

Almost 8 PLN for diesel here ⛽
I was about to say "it's 2 €"
But € isn't 4 PLN no more, rather about 5
I‘d fail since I learned about running container engine on windows. that is some weird shit
Nasty
Ew
very much puke, yes
Nice my tuya gateway arrived just to see that with the new zigbee2mqtt version has already the update for the new tuya plug. At least i learned how to get the firmware link for tuya devices xD
oooof
first touch with docker, yeha!
well at least i learned something
hopefully the plug does now do what it should, then i can order more
they've still not arrived?
no 😠
do they come per container on a ship?
time to delete this tuya crap from my smartphone
TOIA
28,07 now here
Saw my first $6+/gal gas yesterday. Need to see what Costco is charging
Luckily the summer is coming. Gotta check if my common rail diesel rig runs on edible oil, like my old rotary pump one did
But i have no idea if edible oil is still cheaper than diesel
My old 1.9 diesel peugeot smelled like McDonald's but ran just fine
Ofc in the winter oil is too thick
And it's forbidden for tax reasons
Power On Behavior On/Off Function does now work on the tuya zigbee plug but it still looks like polling
lol its now turning off randomly
what about used oil from cooking places?
What about || gutter oil ||
Whatever. Got to be flamable
ask atx for whale oil.. that burns quite nice
General questions for the community, even simple Yes/No/Maybe answers would be very helpful!
- How much of a concern is data privacy (or privacy in general) when it comes to smart home appliances?
- Would you pay for hardware or software that would allow you to run an assistant like Alexa completely locally, with no connection to a cloud service?
- yes
- no, i dont use any assistant like alexa and dont want to
- Have you read up on Home Assistant?
Home Assistant already enables people to automate and manage their privacy concerns, and if they want a local voice assistant they can do that too
Upgraded my face-mask game with an RGB matrix. Slapped the Laughing Man logo on there, for good measure 👀
Wants to say something clever, relevant, fumbles and resorts to just shouting: STAND ALONE COMPLEX
Was a good show, though
Oh, does HA come with a local voice assistant? Or if there are integrations for them, then could you mention a few? (sorry if this is really ignorant)
Right. I missed the channel completely. My bad. Thanks!
I thought what I'd do was, I'd pretend I was one of those deaf-mutes
Unfortunately, the matrix isn't high-resolution enough to scroll that as rotating text around the logo

you keep posting the wrong picture of yourself

linux in a nutshell
What’s a breaking change, I only know changes I make that destroy things
I'm very behind on updates. It's gonna hurt...
I was behind about 2 years ago.😆 was a disaster to upgrade. Since then, keeping up with updates.
I'm slightly wary of HA upgrades. I've had them tank everything a few times...
There was a whole run of HAOS versions that simply wouldn't boot on my Pi3. I actually upgraded to a Pi4 before the Pi3 builds were fixed. lol
Jokes on you i never updated any software unless the version is not eligible for support
Sucks to run the auto-update and wind up with a paperweight
Currently on 2021.9.7 😅
Time to read a few pages of release notes...
22.2.6 🙂
22.3.1
That’s also not a great way to live. Plenty of updates are there to patch security flaws too
It's a joke lol
I am not stupid to not update Minecraft when log4j vuln come
You say that but I know a lot of people who just don’t update at all
Minecraft basically forced an update so that wouldn’t have even been voluntary
I have a Minecraft server
I updated and tested it
To make sure I am not affected by log4j
Do you update everything else too?
I presume the host for the server is in the cloud?
Yes
I use a hosting provider
Do you update your computer and that stuff too though?
Nice. They can be the ones to update the rest
Also updated crafty cz I use it
Ingore timestamps
This is yesterday image
Yes and no
Phone just updated last Sunday
Windows update hangs my PC at the update stage
Windows 10
Yes which version of 10
After 99 it doesn't goes on anymore
How long do you leave it
1 to 2 hours
Should try the update tool then. Guessing you’re not on 21h1?
Yes
Tried also fails
No error just stuck on 99 percent
Which update tool did you use? This one: https://www.microsoft.com/en-au/software-download/windows10ISO?
Whoops wrong link
From here go to download update assistant
Yes it rebooted my PC for updates but when it says applying updates it gets stuck on 99
And rebooting the pc let's it reverts the updates
Might have to use the bootable medium made from that to update then
Or try the windows 11 upgrade assistant and upgrade to win 11
It doesn't let me update and it says apply all win10 updates first
Then you should look at why it doesn’t work. Windows logs will try to help
Otherwise maybe just try leaving it overnight
And maybe a dism repair before the update too
And cleaning windows 10 update cache
Dism repair and cahce clearing before second attempt
Still same
I have tried every method to let it work but it doesn't
So I let my PC with no updates installed
You tried leaving it overnight?
Yes
I don't have a usb or cd
Or use it to try Linux instead
Your family doesn’t have 1 usb that’s greater than 8gb?
Erm my mom doesn't want Linux
So I can't install it
It’s your desktop though isn’t it
My dad have but all is used by him
Why not install it
Family pc
Probably even more reason to update….
Yeah
But win 10 updates failed
Want to install Linux
But my mom doesn't want it
Then a) get your own computer - laptop or desktop to try out Linux and/ or b) try and use a bootable usb to update windows. There’s a lot that can be done through powershell so worth looking into how to completely reset update (think it includes stopping the update service, deleting files, starting the service)
Tried all alr
Except USB and cd method cz only my dad have USB and he doesn't want to let me have it
I do have a laptop that is more messed up
Well try it again. Read through other stuff. This is called troubleshooting
Curious too, guessing you don’t run home assistant at all either?
I have ran it before
On a vps
Stupid isn't it?
Why would you run it on a server that’s not at home
Using it with Minecraft
But why
Minecraft was hosted there too
Wish I can get the vps again
But why did you want HA for minecraft
What was the use case
Well to control Minecraft redstone in real life
So integrating HA into minecraft?
Something like that
How did you deploy HA? Docker?
Core
just did a three hour workshop for a partner team
and I opened the recording afterwards to check it
heard my own voice
Maybe listen to it through bone conduction headphones?
keep in mind, thats how others hear you, so they'll puke aswell
Pink Floyd - Wish You Were Here (24-bit / 192 kHz) vinyl rip.
Animações incríveis, excelentes! : "BEYOND US - After the Collapse" by Maxime Tiberghien, Sylvain Favre, Maxime Hacquard (https://vimeo.com/325642710); "PERSECUTION" by Eddy Loukil (https://vimeo.com/301669729); "The Last in Line" by - Zaki Saati (https://www.youtube.com/watch?v=abP...
can confirm
So it's not just me
I've sent 2 mails already, 0 response.
problem is that they're returning null values
last value I got was the 28th of february, the API returns null, the map of theirs works just fine 🤷♂️
Never unless it’s 100%
that just means you are cheating
Or you studied too much
Or the exam was too easy, compared to your experience
What happened to the other 98%?
You have a two core exam ?

Well, my AZ900 is booked, now to figure out what other Azure exams I should do
since all of them are 100% discount
Need to book the CCNA I have a voucher for too
did Google just go down?
Pearson Vue is discriminating me though, they said Linux isn't supported for home exams
Google is fine in norway @orchid rose
just finland
Here too
Hide your kids, hide your wife
👀
hello - does anyone know of ways to setup a hub and zigbee or zwave devices so that they can be programmatically paired? I would like to be able to send kits that contain the devices and a hub which will work out of the box without the user having to go through the pairing exercise. I am looking for someway to remove the friction while allowing for a scaleable solution. Thanks!
Pretty sure neither have any support for that in the standards
You either have to pre-pair, or pair during the install
Thanks - do you know if matter will?
I have no idea, but they've published the specs
I'd expect the same applies though
I couldn't google if it was up or not
I tried requesting a new api key. Nothing arrived.
It's not the API key, at least not in the Netherlands. The data it returns is:
{"_disclaimer":"This data is the exclusive property of electricityMap and/or related parties. If you're in doubt about your rights to use this data, please contact api@co2signal.com","status":"ok","countryCode":"NL","data":{"fossilFuelPercentage":null},"units":{"carbonIntensity":"gCO2eq/kWh"}}
A working example is Germany:
{"_disclaimer":"This data is the exclusive property of electricityMap and/or related parties. If you're in doubt about your rights to use this data, please contact api@co2signal.com","status":"ok","countryCode":"DE","data":{"datetime":"2022-03-10T13:00:00.000Z","carbonIntensity":278,"fossilFuelPercentage":32.05},"units":{"carbonIntensity":"gCO2eq/kWh"}}
Eww cloud
I've seen no local way to determine how clean the energy is at the moment 🤔
Weeiiirdd, so I just flipped an input boolean switch, history shows it's state change to "on" but the automation that it's connected to which it triggers never ran, it's like the state change, while in the history, didn't register properly. This is absolutely the same issue I have with some of my other automations not firing, the state changes, but somehow doesn't register despite showing in the history and interface.
Yea we still don't have a crystal ball integration.
That's to confuse the Russians.
Seems like overkill for that.
I was joking, hehe!

flexing nitro smh my head

This u?
ahhah, I shouldn't laugh
Aerodynamics are weird
Bing?
Porpoisong!
I believe they call it
They are stalling the undertray which is then losing downforce and then looping over and over afaik
lovely
I should have probably stayed on at school :/
They are speculating a lot atm that most teams are running high downforce setups, although we don't know how much
They can increase the ride height, which will reduce porpoising, or reduce downforce/ reduce speed (at certain tracks they won't reach as high speed)
But this is all sandbagging and difficult to quantify atm
plenty of ways around that I'm sure, but all of them cost a bit of time as well
Definately
I didn't expect a swede to be a F1 nerd btw
They were talking about how many 10ths they would gain if they made cars lighter
And such, they are really about every milisecond
The real danger to me is if it starts doing that in high speed corners as well. Losing half the downforce in an instant would be a big yikes
Hehe, I grew up as offspring to a serious f1 fan and was very interested in the engineering side of the cars
In England, I am a fake Swede
I see, makes sense then. They seem to be able to drive, even if on the wrong side
Maybe also if you are in slipstream and jerk out to overtake and suddenly car starts to loose downforce as you jerk out. Not seen either of those scenarios, but it wasn't long ago aero in other series was seriously wrong
Thinking of the clk gtr lm at le mans....
1999?
Porsches gt1 also flipped
98 or 99
Yeah those were pretty horrific
But I'm sure the simulations have gone a long way since, but this again proves that we can't quite simulate everything this complex
Can anyone help me with the SmartRF Flash Programmer v2 from ti.com? Their website is having a melt down
I am super surpised that thry haven't solved the porpoising/ the basic fia rules (before loopholes are found) would cause it
Try asking in #zigbee-archived!
It seems as though they weren't expecting it to be this bad. Probably because of lack of real testing
Mmm
Not sure how close the fia work with people who can give them data on the implications of their rules
But like, they could legit say the cars are only allowed 2 wheels next year, and the teams would have to scramble to fix it haha
Supposedly for the first time they had a group of people exactly for that purpose. In fact a lot of people thought all the cars would look exactly the same since the rules were so strict. Couldn't have been further from the truth
The loophole finders do a great job :D
They still all look the same to me 😂
You monster!
It's been great to watch even if my understanding of any of it is very limited. But just today Mercedes just casually "removed" their sidepods https://i.redd.it/jrvbdmf0cjm81.jpg
It is so simple really
But yet so far outside the box
Also tvat little hole at the edge of the floor
I believe it is an anti porpoise hole
All I know is that they allowed one on the floor. I have no idea what the purpose is
There are much better series for racing, but I love the combination of racing, tech and drama
talking of the latter, the new season of Drive to Survive should be out in a few hours
nerd
To school for cool 😉
Wish I understood that when I was in high school / college. I pound it into my kids heads today though….they get it.
Mmm, will watch it through in the coming days :)
Drive to Survive seems to be making a massive impact on F1. Maybe not in a good way, too much drama :/
Anyone using any HP Proliant and having ILO problems?
I think the Nand of the ILO is broken. Maybe there is a way to really check if thats the fault?
Well that is a known issue
Check the health status in the webui, it will state if the nand is corrupted
And you can format it
Which might help
Also update to latest ILO version
thank you for your response. The WebUI is really slow and it takes a long time to open it.. I cannot even change tabs to switch to administration and things like that. I remember seeing the Health stating "Ok". Im currenly loading the webui again to see if I can spot anything. I already tried to update it but the log showed it failed
Is it possible to check the health via bios?
Well no
You can check it via ssh
And you can format it via ribcl
Just let the webui load though, it will eventually load
And if you have ILO newer than 2.60 you can format directly from the webui instead of ribcl
I have ILO version 2.20 but I can only see up to version 2.31 on hpe for ilo2
I have ilo version 2.00 but my update to 2.20 failed
Oh right, g6 still had ilo2
How can I force my phone to accept my self signed SSL certificate
Use proper certificates
So the slow ILO might be another issue not the nand?
There is no nand on ilo2, so yes
I want to do local tests
Not expose to public
oh thats great
Then implement a proper ca internal stack with and trust your ca
Upgrade to 2.33 https://pingtool.org/latest-hp-ilo-firmwares/ @junior python
Ikn how to let my PC thrust it
But phone no matter how many time I install
It always popup a private key needed message
I will do that. Thank you for the help
@clear ferry
should I update it via the webui or can I do it via USB?
Webui or ssh
I believe the ilo2 did support pulling via ssh
But i haven't touched an ilo2 system in.... 4-5 years
alright thanks
What domain is it using? Or just a 192.168.X.x address?
local address

Now u know why I don't want to use a thrusted ca
Unfortunately if they make a lot of drama, more people will tune in and watch f1. And that will sell more merchandise, etc. It will eventually turn into a very high tech reality show when they also race cars 🤣
Think atx said make your own trusted CA, so your own cert auth then add it as trusted for your phone
Just get proper ones, if you don’t want to pin yours on your stuff =.=
Buying a domain is fun
Now I own two
One that’s all public facing stuff. One that’s all local stuff
I should buy a third
Would setting up a CA involve touching the registered domain in anyway or is it more a matter of being chased down by MS Press for setting up the millionth contoso.com CA?
Ah
Hey atxbyea SSH just refuses to establish a connection and webui update seems to fail everytime
Try resetting ilo
Have you tried doing a factory reset of the ILO?
It's it on the same subnet as your client?
Yes I visited the options when the server started and selected the "set factory" in the ilo page
yes I can reach it and there is no FW blocking
how does the ribcl work?
SSH now throws "no matching key exchange method" with an offer and "no matching cipher" with an offer
using both just "Recieved disconnect from..."
connection refused on telnet
:(
Oh that's really long time ago
I noticed there is serial cli available. I could use that to update the fw right?
Ok somehow using putty and ssh works now
putty 😂
At least it connected me to the server
which program would you choose instead of putty?
I use alacritty and openssh 😉
Though on windows I mostly used the tools installed with git for windows
I might try that. I use openssh (the one offered with win10) but it just said how there is a no match on these things
putty is a horrible terminal emulator.
I feel so bad for windows people who don't know any better.
There is only a way up from here. So I might learn to use other terminal emulators 😄
So atxbyea sorry for asking that many questions.. I now successfully ssh'd into my machine and "cd'd" into the correct directory and followed it with the "load -source ..." I can see that it requested the file and the terminal says "Command Completed" which is wrong because it should say "Command spawned" (at least thats what the instructions say)
typing "version" still shows 2.00
i'm just fine with putty
I'm sorry.
stockholm...
Not old enough for someone on homelab to question getting as a first server for 200 dollars from a friend though
All those racks with 2950s and such just eating electric
It supports loading via http at least @junior python
show /map1/firmware1
cd /map1/firmware1
load -source http://http_server_ip/ilox_xxx.bin
Other options might be available, i don't have a ilo2 anymore
yes. 🍵
So using an older IE version seems to work with the webui but now the upgrade still fails. Thank you very much for your help.
https://www.google.com/amp/s/vmfocus.com/2013/11/26/hp-ilo2-firmware-upgrade-via-webpage-failed/amp/ @junior python
I remember this bug
Ended up installing a 2012 version of Firefox
yea I tried the "new" firefox and it yelled at me because of some unsupported protocol
herry_2 is already taken care of, before you report.
Hi I have a problem I have a Diffuser with tasmota BrilexDiffuser https://templates.blakadder.com/brilex.html But in HA only on/off nothing Light. The Tasmota is configure with script but Idon't Know that configuration I have that write in configuration.yaml
You found the one channel in which HA support is off topic
See the #integrations-archived channel for help with integrations
Thank you
@tidal bronze Hans Zimmer actually made me wish I had Atmos
ATMOS was made for this 😀
That Indian drummer is insane
Just use ssh on windows
It's been in PowerShell since at least 2018 
I don't use windows.
I'm feeling sorry for people who do and then use putty cause they don't what a terminal can and should be
Give me some HP C1018 baby

I threw out mine a few years ago because it started failing
Need to get a new one
Love the hpux keyboard too
You'll enjoy this @dusky plank @finite atlas @shadow prawn
That's a nice keeb
buckling spring action?
I have my Model M that I refuse to let go of.
I can't use it of course, cause the sound of me typing would literally shake the plaster off the walls.
Hmm this true?
i'll take it
None of those wannabe modern adhd keyboards for me please
Model M life
100%
I've had co-workers complain that I "Type too loudly"
I built a keyboard using 78gram Zilants so I could get a nice firm key feel without blasting the room with noise.
play musik over it, so they cant complain that you typing is too loud
I love floppy orchestras
yes!
A friend also has a IBM Model M, nice keyboard
I feel this. typing is one of the reasons I keep my nails short.
It's one of the things that reminds me to cut them. That and typing on my phone
chipotle, thai, or a sub? dinner decisions...
I started with chipotle but I am a lone man tonight and so that felt... wrong...
nvm figured it out, too late to flip flop
Can't say that without saying what you went with
Ngl no clue what a cheesesteak is
where are you from?
clearly not from the northeast of the US
I'm gonna show you how to make a Philly Cheesesteak at home today. Making a real cheesesteak at home is something I've always viewed as out of reach until I was asked to make one recently. So I studied some of the legends, Pat's, Dalessandro's, Gino's and worked on a method to make a real Philly cheesesteak at home for all to enjoy, where ever y...
Lol fair enough. It’s a fatty but delicious sandwich
Take steak. Make it to ground meat. Still call it steak
Disgusting
Anyone know why I’m blocked in the HA FB group..? 🤔
No one gave me any reasons or warnings about anything, wanted to ask a question but wasn’t in the group anymore. 🤷♂️
No idea. FB is a horrible platform for support so I never go there. Message the FB group admins if you must or get support here or on the forum or on reddit where it is easier to follow what has been said.
Jesus fookin
211 votes and 68 comments so far on Reddit
I'm glad I left those guys behind years ago
Don't just post that without posting their formal reply: https://www.reddit.com/r/PFSENSE/comments/sw4ihc/love_your_transparencywhy_not_address_the_issue/hxl2bl9/
What are the chances its just a legal team doing over and above CYA
They aren't very trustworthy at this point, so I'm not gonna take that as any kind of proof of future intent 
yeah, we are never gonna do that
does that

Whats better? Isn't opnsense just a rebrand of the same stuff?
It's a fork, that is completely open source
You can build opnsense from source
You can't with pfsense
You monster
Damn, you and @scenic radish have the same ocular malfunction
I knew I didn't like you, now I know why

I thought I provided enough racoon gifs to make you like me


To be fair, I do get problems with lots of light text on dark background, I get after image sometimes
Which I don't get if it is reversed
Hey!

How will they scan something I don't have?!
Is it better if I say I only use light theme during the daytime, night time it automatically swaps to dark?
"we found the problem, you are overworking your peanut"
Infinately
Yeah I cant use a dark theme during the day The window behind my monitor does not have blockout blinds and this makes dark pages difficult to read.
all day. With 2 hours of sunlight
Proof that you are a hobbit! Your real name is probably something like Dildo Gagins.
The Tree House Builder was in norway on tonights episode. He was working with Norwegian builders and holy crap those guys were a joyful bunch.. prob an act for the camera
You would be right, if I move North
Surely you stop insulting him now, he’s showing American pride with the flag on his monitor 
Bastard likely uses it as a tissue on a stick
Isn’t that what you’re meant to use flags for
only in the down under
The synthetic ones make good fire lighters too.
For Solar Analytics integration into HA energy management see
https://github.com/PeterH24x7/-Solar-Analytics-integration-for-Home-Assistant-Energy-monitoring
Holy wow thats a very old reply
Did you just search for solar analytics and reply to it?
when norwats begin to starve
LOL

