someone said land cruiser today
#the-water-cooler
dusky plank
finally I know where this comes from 😂
https://img-9gag-fun.9cache.com/photo/a5KoK9N_460s.jpg
"they see me rollin', they hatin"
clear ferry
last dirge
clear ferry
Is ytmnd still a thing? I haven't been there in 20 years
slate marsh
So i heard a colleague pronounce yml as y.m.l. (three letters) yesterday to me it has always been a word along the lines of yam-el. Which of us is wrong
static schooner
since it has an "A", I'm going with the yam-el
yml is some "I only have 8.3 characters" BS
and 1990 wants it back
slate marsh
Phew I'm glad. The well it's XML and HTML argument does make sense but yeah yaml was my reasoning
trim fox
Anyone else having HA not to start after launching 0.117 update?
wet pilot
Those are abbreviations so it's a bit different
static schooner
initialisms, right? And they all are
slate marsh
YAML is recursive along the lines of GNU though, but GNU is also pronounced as a word. Wish we could just agree. If the GIF guy every says it's G-I-F I riot
static schooner
yes, it's recursive
although I've also heard "Yet Another Markup Language", which I think is actually not what it is at all
slate marsh
Well that's kinda the opposite of "YAML Ain't Markup Language"
slate marsh
Yeah was a nice diversion from iOS stuff
red sequoia
Hello since I dont know where to ask this: I am trying to set up my secrets.yaml and got to the point where my system tells me I need to set a dburl and now I am confused... As I understand it the dburl links to the secrets.yaml doesnt it? Sadly I cant finde if I have to define that for every single one or just once and where to put it in my config.yaml... If someone could enlighten me
red sequoia
i will switch to integrations but I dont quite get what recorder has to do with the secrets.yaml setup
storm niche
Can I share a referral link anywhere here on discord?
deft pewter
Why would you want to share a referral link here unsolicited?
It's not a place to advertise things for your own gains.
storm niche
This is why im asking. There is a referral program on aliexpress where users can help each other with one click to win smart things. I try to get a Yi cam right now.
static schooner
- Spam will not be tolerated, including but not limited to: self-promotion, flooding, codewalls (longer than 15 lines - use Hastebin or similar³) and unapproved bots.
but somebody green is welcome to weigh in
deft pewter
I think rule 6 sums it up 😉
storm niche
Ah Thanks RobC that was the info I was lookig for
deft pewter
Spam is spam. Doesn't take a genius to figure out what other people may consider spam.
Referral links are the business version of those stupid chain mails people send.
storm niche
Yes but its a win-win situation if you do it for somebody and he also does for you
peak cloud
Green here, and it is against the rules.
deft pewter
If someone asks you for it, it's not spamming. That's why I said 'unsolicited'.
peak cloud
If someone wants to PM you now knowing that you have a referral link, I cannot stop them from doing that.
storm niche
Sure. Thanks for the info.
peak cloud
RobC already mentioned it, but HassBot can be triggered for rules too. 🙂
velvet horizonBOT
storm niche
Just wanted to share somehow the game maybe somebody would like to join a game. Understood
deft pewter
Nice. Let's move on 😉
peak cloud
I'm not reiterating the rule, just show off HassBot. 😂
storm niche
Yes lets move on already spent too much on it 😄
dull plaza
Guys anybody here using google voice assistants?
static schooner
#voice-assistants-archived is where you'd want to go
velvet horizonBOT
@peak cloud I love it when you show me off!
forest edge
dale touching the bot in naughty areas again. someone alert an admin
static schooner
I was totally going to look for a bot command to do exactly that and got bored 🙂
hearty depot
subtle pasture
"Show us on the circuit board where they touched you"
red sequoia
XD Oh my god that got dark
fiery flower
Does anyone know if adaptive lighting is in the latest release?
Mentions in this release but i cant find in on the integration ui
peak cloud
Doesn't seem to be able to be added from the integrations panel in 0.117.0.
Let me check PRs.
@fiery flower Still open and was not added to 0.117.0: https://github.com/home-assistant/core/pull/40626
fiery flower
Thanks, looking forward to that feature
red sequoia
Can someone tell me if questions how to integrate ring doorbells into #integrations-archived or into #hardware-archived or elsewhere?
red sequoia
@hearty depot That is illegal that bord is way too young
peak cloud
@red sequoia You're looking for the #integrations-archived channel.
If ever in doubt, you can check the channel topic at the top of any channel to verify that it's the channel you're looking for.
red sequoia
Thanks dale3h
peak cloud
Well fuck. My covid test just came back positive. 😦
quartz ether
Unlucky.
hushed basalt
I'm sure atxbyea has some servers that are 18+
subtle pasture
@red sequoia Let me get my Amiga 1000 out of mothballs, it's older than I am 😂
vital fjord
@peak cloud Oh no 😦 😦 I'm so sorry
subtle pasture
@peak cloud Get well soon 😟
peak cloud
Thanks. I am mostly feeling okay. Sunday and Monday I think were the worst. Since Sunday afternoon I've covered all "common" symptoms except for vomiting and diarrhea. Now it's mostly just congestion, body aches (my lower back is killing me), and fatigue. Lost smell/taste two days ago.
subtle pasture
Yeah, losing your sense of smell is a hallmark of COVID at this point
peak cloud
I can stop self-isolating once it has been at least 10 days since I first started experiencing symptoms and I am fever-free for one full day without fever reducers and my symptoms have improved.
Sucks that I live with my best friend, his wife, and their two kids (11y and 4mo). And on top of that I've had my daughter for the past week, so she most likely has it too.
subtle pasture
I've always found it weird how we use "sucks" as a negativism when the act is so highly prized
"That sucks!"
"Isn't... isn't that a good thing?"
vital fjord
🤔 .... You're right. I should go down an etymology hole instead of work right now
You raise a valid and important point.
Richard, hold my calls.
forest edge
@peak cloud sorry to hear that man. know how you got it?
peak cloud
No clue.
forest edge
I've always found it weird how we use "sucks" as a negativism when the act is so highly prized
@subtle pasture on the contrary, it's not always highly prized. when done wrong it down right sucks
subtle pasture
#NoTeethPlz
peak cloud
If you consider the high end of the incubation period, it could go back 14 days.
forest edge
or more
vital fjord
Well. From my googling, best I could find is that it comes from "sucks hind tit" to mean the runt of the litter who got the least milk
Which doesn't exactly help the idea of it being rooted in salaciousness
forest edge
something to put on your resume, "extensive knowledge of the term "that sucks" background history"
subtle pasture
No, no, that's good. I now get to mentally replace all instances of "sucks" with "sucks hind tit"
vital fjord
Ya know... it feels weirdly classier
subtle pasture
Right? lol
vital fjord
I just imagine someone in a 2-button suit saying it.
forest edge
when you find yourself reading too much into stuff like this, you ruined it for yourself, please don't continue to ruin it for others lol
vital fjord
Unbuttoned, mind you.
Hey it didn't ruin anything for me. Who am I to say who will be forever bettered by the knowledge and who will be forever scarred
tidal bronze
@peak cloud get well soon.
rare condor
Just got marketing email from Google with "Final Proof - AU - en-AU - NonG1 - 20134459 - GS200173" as it's title and message "this is ready for dist", someone in their marketing department messed up
forest edge
ransomware
peak mountain
Yea
peak cloud
@tidal bronze Thank you, sir.
dull chasm
cough it up old man ...you will be ok
peak cloud
If I was yer age, I'd be in the hospital already!
tidal bronze
@peak cloud Are you on steroids or just OTC?
peak cloud
OTC, Aleve and Mucinex D
dull chasm
cant beat the apple sauce
peak cloud
@dull chasm Too bad I don't love apple sauce.
tidal bronze
Any steroid keeps symptoms down makes it much easier.
dull chasm
and the boiled eggs are good ....but nobody else wants to be around ya ..... they produce bad bad gas
peak cloud
I don't have insurance, so going to see the doc costs an arm and a leg, especially if they administer a shot of any kind. 😦
tidal bronze
Prednisone, urgent care.
peak cloud
The great thing about covid...I can't smell myself after not showering for days on end.
tidal bronze
Lol
peak cloud
I did take a shower last night, though...I felt like I smelled terrible. 😂
dull chasm
@peak cloud i can send you overseas with the military for ten years then you can have veterans care like me
grand thicket
@peak cloud Get well soon! I mean, who takes showers anymore when your stuck at home anyways 😂
peak cloud
I currently live with my best friend, his wife, and their 2 kids. Tuesday his wife started showing symptoms, and then today he started showing symptoms...so soon they might not be able to smell me either.
@dull chasm I am not brave enough for that.
grand thicket
Hey, I guess that's one positive outlook
peak cloud
Thank you jaxon.
dull chasm
and you call me old .... i did it
tidal bronze
Well you are old.
peak cloud
That's because you are old, old man.
tidal bronze
@dull chasm BTW past bed time. Get those Pjs
dull chasm
i am in pj's got home late fixin to go to bed any sec
peak cloud
I haven't felt up to drinking since this shit started (Sunday afternoon), but now that I am confirmed positive...shit's on.
tidal bronze
Drink anything but beer.
grand thicket
Nah, you need something a little stronger then that
dull chasm
so your drinking a wine cooler ...girly girl
peak cloud
Wine cooler != seltzer.
Right now these seltzers taste like...seltzer water. With no alcohol in them.
dull chasm
close enough
tidal bronze
Beer makes congestion worse
peak cloud
But before I lost my sense of smell and taste, seltzers remind me more of a vodka/soda/lime.
Interesting. I've never heard that!
peak mountain
Is kasa a good brand for smart things
dull chasm
he eats rabbit food....not sure about op
peak mountain
I'm getting some new smart plugs that aren't random chinese crap
grand thicket
@peak mountain I try to stay away from WiFi devices. rather use something local like Zwave or Zigbee
tidal bronze
@dull chasm I am going to ship you some
peak mountain
Okay makes sense
peak cloud
Kasa is compatible out-of-the-box with Home Assistant, so yeah, not a terrible pick for wifi plugs.
dull chasm
some rabbit food.....i got 50# sacks lol
peak cloud
I'm been grabbing Kasa smart plugs every time they gone on sale for $5 or $0.00.
Did any of you guys get in on the free Kasa plug deal a couple of weeks ago???
grand thicket
No, didn't know that was even a thing
peak cloud
It wasn't supposed to be apparently, but it happened.
Also at the same time a $10 Wyze Cam v2
grand thicket
Free shit is always helpful for a broke college student
I've been picking up some smart devices as I go but man, this stuff can get expensive fast
peak cloud
(It's not valid anymore...just showing that it happened)
And the $10 Wyze cam: https://slickdeals.net/share/iphone_app/fp/597137
hollow glacier
I’m over the Wyze cams these days.. not bad as a gift tho
thick dragon
Anyone able to provide any guidance on where I should be looking to get my HA instance loading again? Looks like supervisor can't talk to core API for some reason. Details over in #330990055533576204.
velvet horizonBOT
peak cloud
slaps @scenic radish with a wet t-shirt.
upper apex
what alternatives are yall using instead of visual studio code?
rare condor
ed
upper apex
ed?
peak cloud
I guess he's referring to this: https://en.wikipedia.org/wiki/Ed_(text_editor) 🤷 Never heard of it.
peak cloud
Wow. TIL that E D is more cult-ish than V I 😂
As far as web-based editors go, before it was deprecated I used the IDE add-on.
young sigil
Beer makes congestion worse
@tidal bronze Got a source for that?
clear ferry
@peak cloud have a customer who got covid.... 5 months ago, still has no smell or taste
low harness
Ed is like the original editor. ed begat em which begat en which begat ex (as in "ex-commands" in vim) which begat vi which begat vim.
clever mortar
Which is why some of the original commands still work, and why the original vi would still work in single line mode (haven't tested it with vim)
These behaviours come in handy when you're on slow/shitty links and need to rescue things
low harness
It probably works with vim but not neovim
Reminds me of that story about the guys who accidentally rm -rf /d, but found out they still had ed open in an ssh session and restored the system byte by byte.
clever mortar
Ouch 😄
low harness
Here's one case https://x3ro.de/restoring-your-unix-system-after-rm-rf-/
I've done it myself too. rm -rf ${sysroot}/ and sysroot was unset...
clear ferry
👀
low harness
I was actually really happy about that annoying osx system protection thing then. The only thing I lost was /usr/local and that's fine.
clever mortar
And by most, you mean >5% 😛
clever mortar
Why are you printing busts of Teddi?
low harness
Why aren't you?
low harness
I foresee no way at all in which you'll regret this.
clear ferry
Not really, since I've already changed to the winter tires
low harness
I can see that. And now you have lots of space for heavy stuff and open boxes of tiny screws and things (make sure to push those to the back so they don't fall down).
clear ferry
Psssh, the boxes contain summer pillows
And the plastic and zinc containers are empty
low harness
Let's revisit this... i don't know... sunday night after Easter? When you need to go somewhere early the next morning and forgot.
Wait... you don't have spikes? Never mind in that case.
low harness
Is that legal today?
clear ferry
We can have spikes on whenever the conditions demand it
Like now we have already had snow and - degrees
And we can drive with them till late April, unless the conditions demand it, then it could be extended to may
low harness
I thought it was Noveber - easter in Norway.
But I don't normally care, so I'm probably wrong.
odd kiln
Hi, not really sure which channel should I post this on, but I am having some trouble using pihole through supervisor portainer addon, maybe some1 could guide me to the right channel 😅
low harness
I tried spike free once. But my driveway at the time was leaning down towards the house, so I couldn't even get that car onto the road for four months.
@odd kiln Maybe #330944238910963714, maybe #add-ons-archived
odd kiln
@low harness Great, thanks
weary summit
is there a place for home assistant memes?
light trout
/dev/null
deft pewter
We can't do memes here? atx shitposts enough 😄
clever mortar
He is a meme... oh, hang on 🤔
deft pewter
No. Only top quality gifs from our man atx.
clear ferry
I'd probably win some award here @deft pewter either most loved son of a bitch, or most hated cunt, I'm like trump, polarizing
Come to think of it, I should get both
low harness
It's funny how the more people there are in hangout, the easier it is to accidentally click it and get stuck in there without realizing...
clever mortar
😂
low harness
All muted. Someone should go in there, unmute and whisper "I can see you..." or something
clever mortar
Just play an audio track of somebody breathing into a mic
lost yarrow
you can see
low harness
Or a notification sound.
clever mortar
Ohhh, typing on a keyboard
low harness
Lol @lost yarrow
clever mortar
Hmmm, TTS to the channel Hi, this is the agency, please stay where you are, we're sending a van to collect you
lost yarrow
lol
clear ferry
@low harness it's just in the way, should be moved all the way to the bottom tbh
low harness
You're probably right
deft pewter
So we're saying he's superior to Norwegians?
clear ferry
@valid halo saw a mitsubishi miev with pink rims and a hello kitty sticker covering the whole door, made me think of you🤣
valid halo
Sounds fun 😄
I envy people who have the disposable income to slap an anime or cartoon character on their car.
clear ferry
Psssh, the miev is so cheap I see them standing around everywhere 🤣
It must be less than $7k used I'm sure
The twizy is for you
forest edge
shouldn't the steering wheel be in the trunk for norwegians so that they are not like any other country?
deft pewter
Mounted under the chassis...
forest edge
looks about right
clear ferry
I drove a car around by using a wrench for a steering wheel once if that counts
forest edge
are all street lights stretched on a wire as well?
clear ferry
Street lights on wires sounds american
forest edge
that picture you posted
forest edge
those saucer things are not lights?
clear ferry
I think they are junction boxes for the tram electric
Never seen light come out of them
forest edge
weird
clear ferry
Might have been lights at some point
midnight adder
is that the "car" alcoholics use when they take away their license
clear ferry
It's quite popular in the city here, I see atleast 1 every time I bother driving in
Also you can't operate any motorized vehicle here if you lose your license
midnight adder
ay, at least 10 yrs ago in sweden it was a loophole since it wasn't an automobile but rather a moped in the register
clear ferry
In Norway you need a license for any motorized vehicle
Too bad it doesn't apply to electric bikes and other electric kickbikes etc
midnight adder
quite a lot of countries have speed limits for them but no proper permits. difficult to be with them in the traffis since you don't know if they act like cars, pedestrians, or bikes
dull chasm
we just dont have them ..so its simple
dull chasm
we dont claim them
clear ferry
midnight adder
@clear ferry , since you're the expert, any opinion on this as ISP supplied device: https://genexis.eu/product/pure/
belive it scandinavian company, sweden
midnight adder
well that sounds reasonabe, but any opinion in the framework that it is ISP supplied
clear ferry
Recycling y'all
clear ferry
Well, am I? We recycle mostly all 🤣
And we pay a fee when we buy boxes and cans that we get back when we return them
clever mortar
Snap - we can recycle metal, paper/cardboard, plastic, and food/garden all at home
dull chasm
so pee .....then drink ...pee ....rinse and repeat
clever mortar
Glass we have to take to the local bottle bank
dull chasm
the planet will recycle what we dont ......
clever mortar
Sadly it takes a while for that to happen with the humans...
clear ferry
Yeah, I hope we get glass and metal at home soon
My parents have that
We only have paper and plastics
dull chasm
hell humans are recycled ....they make nice flowers i been told
rare condor
Invest in a Can Crusher
rare condor
reduced my trash massively for recycling
dull chasm
i buy very little that is not biodegradable ...so not too worried about recycle since it recycles it self ..
good point ... i mandate ...pine caskets .....
clear ferry
Psssh, just use a hemp bag
forest edge
cremation will be mandated before long probably
rare condor
Organ donation for me
forest edge
not sure you'll fit... || ooooooohhhhhh ||
clear ferry
I do that too
dull chasm
cremation leads to co2 gases ....better to have nature decompositon
rare condor
and Science
clear ferry
Easily combinable @rare condor
dull chasm
personally i dont want to burn ....would rather want what nature inteaded
forest edge
cremation leads to co2 gases ....better to have nature decompositon
@dull chasm so does forest fires
dull chasm
true
rare condor
tbh none of this matters your dead
dull chasm
if you are cathloic it does
forest edge
we all end up in the same waiting room regardless.. think Beetlejuice but with norwegians being nearby
dull chasm
@rare condor no but dont dismiss veiws neither
rare condor
I submitted my first integration today as PR 😁
forest edge
he did really good with that role
nice when actors finally find that one role they kind of click at
rare condor
@dull chasm Sorry if my comments came of as rude or dismissive I didn't intend to.
I have never watched Beetlejuice
forest edge
ban him!
rare condor
lol
clear ferry
That was easy USD118
forest edge
what?
clear ferry
Recycling
rare condor
thats insane
forest edge
confused, you saying you get paid to recycle?
rare condor
we get 5cents a can and have to return it to another state 20hrs drive away
forest edge
I must havve missed that part of the convo
forest edge
we use to get some change back for recycling, not anymore lol
deft pewter
And we pay a fee when we buy boxes and cans that we get back when we return them
@clear ferry So that's what the random Kr things are on all my beer cans?
dull chasm
@rare condor np ....the chat should not be biased on any view nor should it a place to preach that you are better (excuse atx and norway thats a whole diff topic) but also should respect a view ....person A should not preach person B should not argue ....niether really happened ....
clear ferry
We pay USD0.21 or USD0.31 per bottle or can we buy, that we get back when we recycle, incentive
@deft pewter yes
deft pewter
So basically it's just more expensive beer if you don't bother to recycle? I like that idea.
On a side note... I'm going to start saving my empties and bring them with me if I ever visit Norway.
rare condor
All good we know atx is just trying to make up for the fact norway is too cold and dark
forest edge
@clear ferry you just pay more that they keep if you decide to throw it in a ditch.. gotcha
clear ferry
Yeah, very few cans and bottles are thrown away, so we don't have that problem
last plaza
@clear ferry <#the-water-cooler message> that’s a lot of sugar! 😝
clear ferry
I think the last I read we recycle 97% of all cans and bottles
forest edge
@last plaza that was just from this morning
clear ferry
If someone throws it away someone else picks it up and recycles it
Incentive
If just some other third world countries would do that
Like in Ireland, everything went into one bin, glass, metal, food, bottles, matrasses, dogs
forest edge
our country has too many aholes for that, so instead we get "programs" where groups of nice people go out and pick up our aholes trash once in awhile
last plaza
Groups of nice people - you mean convicts and inmates?
forest edge
not all of them are that lol
last plaza
In the name of “community service”
forest edge
I don't think that actually happens anymore, at least the northern part of the states
maybe where Vasiley is they still do the horse and shotgun watching convicts on the side of the road lol
dull chasm
i just thought of something ...our country is pushing this income for those that dont have .....like 2k a month .....they can do "community service" to earn it .... build roads .....pick up trash ....etc etc ...... win win right
@forest edge we do
forest edge
messed up we have to do that to keep our place clean
should just ship it all to atx so he can "recycle" it
dull chasm
well @forest edge they are the ones that prolly throw half of it out to begin with
clear ferry
@dull chasm anyone here who didn't have some kind of disability but can't work have to do stuff like that to get money from the government, actually they have to do any job the government gives them or else they get nothing
forest edge
@dull chasm probably lol
last plaza
@dull chasm that’s a noble thought. At the end of the day, you pick trash and someone else gets paid. Where is that payment going to come from?
dull chasm
@clear ferry damn i cant believe i actually liked one of you comments
dull chasm
@last plaza well i am in goverment and we pay contractors to do the same ....so i think the community service idea would be cheaper
clear ferry
Yes it is
forest edge
they do "adopt a highway" programs here, that had filtered down to some city roads as well
last plaza
We pay contractors because the govt employees don’t want to do anything.
dull chasm
@forest edge that is only bullshit pr stuff
forest edge
maybe but I see groups of volunteers out there quite often
clear ferry
Here we just send school kids to do it once a year, that is enough since there is very little trash to pick up by the road
last plaza
Child labor!
forest edge
they consider it a break from having to knit yak fur into blankets to not freeze to death
clear ferry
Now for glass and metal
deft pewter
You should update that sign to the HA logo...
forest edge
looks like someone was using that recycle bin as a target practice for like a BB gun or something lol
deft pewter
Nah... they were using atx for target practise. That's just where they missed.
forest edge
maybe it's rocks blown into it from the snow storms they get
forest edge
they do look rather small
$19.99 wyze camera x2 comes to $57 a some change to purchase.. wtf lol
tacit tapir
Might be a very dumb question but I'm flasing a zhh! stick with zigbee2mqtt. I need to install pip & python to my windows machine to do that. Both done. But now when trying to execute the flash script I get a not installed error:
C:\Users\l\Downloads\cc2538-bsl-master\cc2538-bsl-master\cc2538-bsl.py requires the Python serial library
Please install it with:
pip3 install pyserial
But when trying to install it I get informed that it already is installed...
deft pewter
What command are you running to do that?
clever mortar
See also #zigbee-archived
deft pewter
Also... go over to #zigbee-archived with it, this is lounge.
deft pewter
Every post from Tinkerer is a cross post.
clever mortar
Need a bot command for please don't Vasiley 🤔
deft pewter
😠
velvet horizonBOT
tacit tapir
Didn't expect this to go into #zigbee-archived since it's not really a problem with zigbee. But i'll move 🙂
deft pewter
You're asking for support 😉
tacit tapir
true
dull chasm
@tacit tapir its okay ...just keep trying to get someone that knows .....this is more of a bullshit channel but no problems ....and good luck
deft pewter
All sorted over in #zigbee-archived. 😉
bitter pawn
how much wood could a woodchuck chuck?
forest edge
wow 7.0 earthquake off the coast of greece and turkey
forest edge
what is that suppose to mean? lol
midnight adder
god punished turkey
peak cloud
@peak cloud have a customer who got covid.... 5 months ago, still has no smell or taste
@clear ferry I guess this is the time to eat healthy and kick the salt habit. 🤷🏻♂️
forest edge
loss of taste/smell for 6mo+ is normal from what I read
peak cloud
Jesus. This is really going to suck.
forest edge
yes and no, think about all the food you wouldn't eat previously you can now lol
forest edge
I had to go on steroids for awhile which drastically cut my taste down. NOTHING tasted like it use to and because of it I actually ate some food I didn't even like before
peak cloud
What are some of the things you didn’t like before?
forest edge
alot of spicey type foods
I think the biggest thing tho was trying diffrent chinese food aside from low mein
it had it's downsides tho since I did have some taste, stuff like tacos which i loved tasted bland as hell, rather unenjoyable to eat lol
forest edge
leave it to a cali to come in and like gross crap without any taste loss
subtle pasture
...horseradish on steak (and especially prime rib) is a classic combination
California didn't come up with that, lol
forest edge
yea I think coal miners did
midnight adder
anyone running HA on raspberry here who is not shy of installing an addon of mine?
I don't have physical raspi myself to test on :/
damn, wrong channel probably
forest edge
curious how you came up with a addon specific towards a pi when you don't have one lol
midnight adder
I run it on virtual machine myself, got bored of SD card issues
clever mortar
See #add-ons-archived 😉
midnight adder
👍
last plaza
@peak cloud hope you are feeling better!
clever mortar
clear ferry
@peak cloud he used to make his own delicatessen sandwiches for work every day, now he eats porridge every lunch...
forest edge
you should stop confusing the rest of the world with your typical 3rd world traditions lol
peak cloud
@peak cloud hope you are feeling better!
@last plaza Thank you. I actually woke up this morning feeling the best I have in days!
Porridge is just oatmeal anyway, right?
dull chasm
well yes and no
forest edge
Porridge can be many things lol
dull chasm
exactly .....in the midwest they make the shit out of grits and grain .....
forest edge
norway it's likely snow and pine needle
dull chasm
it is always a low cost ....high fiber/filling meal ..... but yes most of the time oatmeal
dull chasm
execpt norway ......some whale that washed up
forest edge
honey smacks
clear ferry
Mmmmm whale meat
dull chasm
dead for 20 days but fresh on beach 🤣
clever mortar
Aged
forest edge
maggots give it texture
dull chasm
no maggots in ocean but let it sit a day or so on beach ......game on
clear ferry
We don't do fermented whale, the fresher the better
Fermented fish on the other hand
forest edge
this is gonna make me nauseated. time to go do something else
clear ferry
Sicilians do fermented cheese with maggots though
Don't eat it the maggots are dead
Icelanders do fermented shark
That is supposed to be interesting
dull chasm
last plaza
I think that’s how @peak cloud found out about his covid. 😂
subtle pasture
@forest edge Had to look it up, horseradish has been cultivated since antiquity. The condiment is actually mentioned in Greek mythology. lol
So, not "coal miners"
clear ferry
I need to taste proper wasabi, not that bullshit any sushi vendor calls wasabi, horseradish with green food colouring 🤣
I guess I'll have to wait until we go to Japan after covid
subtle pasture
The issue with real wasabi is it turns brown very quickly (due to oxidation) once it's been made from the plant
Like, it turns brown faster than guacamole
clear ferry
Interesting
subtle pasture
So you basically have to have wasabi root on-hand, and grind it yourself before serving
clear ferry
I have never had my guacamole turn brown
Even after two days
I just squeeze half a lime into it
subtle pasture
Lime juice helps prevent browning
clear ferry
Exactly
subtle pasture
Works on apple slices, too
odd kindle
Wasabi 🙂 I use that for remote backup
@dull chasm lol. Need to do that test
@subtle pasture I’m thinking of picking up some small ssd to try esxi this weekend. Happen to have any good guide? Or recommendations?
clear ferry
@odd kindle for boot? Just do usb or SD
If storage you can use any NFS / iSCSI target if you already have storage
subtle pasture
@odd kindle What's the SSD for?
odd kindle
@clear ferry oh. That would make it a lot easier
subtle pasture
Yeah, ESXi is an embedded OS, so it usually runs from an SD card or USB flash drive
odd kindle
@subtle pasture well, I figured esxi needed something.
clear ferry
It lives in memory after boot
subtle pasture
Or, in larger clusters, it's network-booted
Compute nodes need not have any storage at all
clear ferry
I've never seen a pxe booting esxi irl, and I've seen clusters up to 200 nodes
odd kindle
Where’s config kept? On usb/sd?
subtle pasture
For virtual machine storage: Find a compatible NVMe SSD
SATA SSDs will choke with more than a couple virtual machines, because they have to service all I/O through a single disk queue
clear ferry
EEeh, it will work for any normal home user
subtle pasture
If you're running from USB/SD, yeah, config is typically stored there
Can be moved to a network location if desired, though
odd kindle
My tiny nuc won’t handle more than a couple of vms in any case 🙂
subtle pasture
@clear ferry Fair, though if you have NVMe, it's a significantly better option for virtual machines than SATA
odd kindle
I’m hardly even a prosumer :p
subtle pasture
I only run 11 virtual machines, and I can for sure tell
odd kindle
“Only”
subtle pasture
@odd kindle That's not many for a DL380 Gen8
clear ferry
I used to run 45 vms at home, with spinning rust
subtle pasture
RAID controllers have multiple disk queues and large caches (not as many as an NVMe drive, but still, far better than 1)
odd kindle
@subtle pasture no, maybe not. But you’re more than a prosumer tho
subtle pasture
It's actually kinda wild. A single NVMe drive outperforms most SANs I deal with in small business environments
clear ferry
Maybe your SANs ;-)
deft pewter
Could be worse. Get some salmiakki
odd kindle
Well. I hear what you’re saying. You’re telling me to buy a new gaming computer and just convert my old to more server.
subtle pasture
@odd kindle Nah, I thought you said it was a NUC? Most of those will take an NVMe drive 😛
odd kindle
It does. But it’s being used for my proxmox install. My gaming setup have a free NVMe.
Also... I want the new Radeon, and a 5000s cpu
clear ferry
🤢
odd kindle
@clear ferry no?
dusky plank
clear ferry
🤢
analog hill
Hi guys. I’be got a Lenovo M93p mini pc. I want to install HA Supervised on this. What would be the recommended path to go?
subtle pasture
Hers-and-hers gaming rigs. Mine is on the left 😘
bitter zinc
Ok guys, quick question. Fire TV stick, Roku TV stick, or Apple TV
I’m looking for a nice looking UI and compatibility with HA
forest edge
@subtle pasture you should invest into some chairs
and maybe some speakers for your SO
subtle pasture
Chairs were out of frame, and she likes headphones 🤷♀️
dusky plank
first time seeing a pc beneath the stove
forest edge
ohhh
clear ferry
I approve of the piano in the corner though
odd kindle
@subtle pasture good beer
deft pewter
I’m looking for a nice looking UI and compatibility with HA
@bitter zinc Ask in #hardware-archived. If you read the topic for #the-water-cooler, it says there's no support here. 😉
forest edge
@bitter zinc plus all 3 work as far as i know
I approve of the piano in the corner though
@clear ferry it's decoration
peak cloud
@dull chasm 😂😂😂😂😂😂 I should have tried this weeks ago!
subtle pasture
@dusky plank Stove?
dusky plank
oh, i meant fireplace thingie
subtle pasture
Oh, the brick thing to the left? No stove there, the previous owners uses it as a TV nook
peak cloud
Beside a fireplace? Lol
subtle pasture
There's no stove pipe or anything, it's just a stone platform/backing
I keep a 3D printer there because, yeah, it's basically a fire-proof corner >_>
forest edge
it's a condo isn't it? loft whatever layout
peak cloud
Interesting. I’ve never seen a stone corner like that without a fireplace.
subtle pasture
@forest edge Nah, it's a house
peak cloud
@subtle pasture Have you seen those fire extinguisher balls?
The first thing I thought when I saw it was to mount one right above my 3D printer.
subtle pasture
There's an actual fireplace in the next room, so there'd be no point in this being used for a stove anyway...
@peak cloud Yeah! I kinda want one for that
It's a total "just in case" safety measure
peak cloud
When they come down in price I might actually do it. But I think they’re $90 USD right now.
spark orchid
I have a suppression system in my printer cabinet after my first Ender actually caught fire
low harness
The heck is that? Where’s the last third of your delta?
subtle pasture
Like, all the Marlin safety settings are enabled, so it shouldn't go up in flames (it'll stop the print if thermal runaway is detected)
@low harness It's a Deltesian
low harness
All the speed of a cartesian and the calibration simplicity of a delta packed in one?
spark orchid
My fire was started by a failure inside the PS, no Marlin settings were watching for that
subtle pasture
Also the computational simplicity of a certesian, since the bed is cartesian, and the arms are planer
So 8-bit controllers can run it without choking
peak cloud
If anyone is curious about what we’re talking about as far as fire extinguisher balls go: https://youtu.be/L_0sawCkIk4
subtle pasture
I mean, feel free to run a 32bit board, but 8-bit is fine with this printer. lol
spark orchid
but that is the suppressor I have
peak cloud
Interesting. I’ve never seen those before.
subtle pasture
@low harness A lot of people use this kind of setup with a belt bed for continuous printing
Which basically gives you a delta-style printer with infinite Y-axis size
low harness
Looks really cool. But isn’t it really easy to get a cup along x from just small inaccuracies?
subtle pasture
A cup?
low harness
Like how deltas easily get a bowl shaped printing plane.
subtle pasture
Ah, yeah, that can happen if your frame isn't square
because then the maths required near the bottom to generate a straight line won't be the same as the maths required at the top
low harness
But knowing marlin it probably compensates for that automatically anyway...
forest edge
just have fire sprinkers installed. that way you don't have to deal with expiration issues lol
subtle pasture
It might be a weird design, but... it does do nice prints
peak cloud
Jeeze, you should have put a NSFW warning with that or something. That’s definitely layer porn.
forest edge
Busting makes you feel good!
peak cloud
Busting makes you feel good!
@forest edge r/nocontext
forest edge
works on all levels, your comment, and Halloween.. Ghostbusters!
subtle pasture
@peak cloud Hah, my bad 😂
That's running an e3d v6 hotend, bondtech (BMG) extruder, and Capricorn bowden tube, on an Ultrabase heated bed.
odd kindle
That looks great!
spark orchid
I'm running a Microswiss with bondtech in direct drive (my kids love "squishy" prints)
I don't think I have prototyped anything or printed anything for myself in a year. I use more TPU than I want to think about because my kids are demanding asses
peak cloud
@subtle pasture How do you like the Capricorn bowden tube? I've had it on my Amazon wishlist forever, but haven't pulled the plug yet. I run a cheapo Ender 3.
peak cloud
The Ender 3 is surprisingly an amazing little printer. It prints on quality with a Prusa.
subtle pasture
It was a good upgrade, for sure. If you're having issues with stringing / retraction, it'll help
And it's one of the easiest print quality upgrades for an Ender3
spark orchid
I still have about 1-1/2" of tubing, so technically, I am still using capricorn tubing, and it works fabulously
And it's one of the easiest print quality upgrades for an Ender3
@subtle pasture That and changing the bowden connectors
subtle pasture
True, true
There's a reason I have that 3D printed pressure fitting on my extruder, rather than the collet+clip thing it came with
Over time, the original fitting would wear down the tubing, allowing it to move in/out on retraction, which is exactly what you don't want
spark orchid
I made some compression fittings (intended for plumbing uses) work for a long time
subtle pasture
No such issues with the pressure fitting, which clamps onto a full inch of tubing
spark orchid
I assume my reference is similar to what you printed
subtle pasture
Conical thread + nut arrangement
I got tired of the orange, so I re-printed it in black 😛
spark orchid
similar enough
Same principal, something gets crushed into the tubing as it is tightened, preventing movement
I can't find the thing on thingiverse, but for the stock hot end, I had a type a printed washer to keep the bowden tube seated in the heatbreak even if the tubing moved a little from bad fittings
peak cloud
I had never considered upgrading the fitting. Should I do that before I even install the Capricorn, or should I install the Capricorn and then print the pressure fitting?
last plaza
Capricorn PTFE tubing kit comes with the fitting. At least it did for me.
peak cloud
The only ones I can find on Amazon have the press-lock fittings.
last plaza
Yeah, you only get the press lock fittings. They are of decent quality
spark orchid
The press fittings that come with the tubing are upgrades from the trash Creality ships with the printer
peak cloud
I can get the tube by itself for $10.40, but am considering this one so I can upgrade the lever and plate too: https://amzn.com/B081DN6RM2
last plaza
Yeah. That’s the one I got.
peak cloud
@last plaza Happy with the quality of all pieces?
last plaza
💯
spark orchid
Metal feeder is a game changer
peak cloud
Ordered! It always helps to know someone else that has ordered a same product, especially when there are tons of options available.
last plaza
The metal extruder doesn’t fit snugly on the stepper motor due to the screw head. I had to file it. That was a minor inconvenience, but an easy fix.
spark orchid
None of them fit quite right and require adjustment
peak cloud
Speaking of buying things on Amazon...have any of you guys tried the Lawnmower 3.0 yet??
spark orchid
I no longer have bed springs either, went to machined aluminum spacers, new bed plate, glass and BLTouch
last plaza
My lawnmower 2.0 is still working.
last plaza
It’s all @clear ferry ‘s fault. Always.
clear ferry
BLAME ATXANADA
peak cloud
I'm still on bed springs, fully compressed I think. But I do have the Creality glass bed and BLTouch.
clear ferry
🤏
spark orchid
last plaza
Nice! I don’t use the bl touch, became so good at leveling, I can do it in sleep. 😝
spark orchid
My current manscaper
clear ferry
Haven't bothered putting on my glass bed yet, waiting for my 3dtouch to arrive
peak cloud
@last plaza The 3.0 has a built-in battery, a charging dock, and a little higher RPM. I used it today for the first time (got it yesterday) and...wow. It still feels like it nicks, but never actually breaks the skin.
spark orchid
Nice! I don’t use the bl touch, became so good at leveling, I can do it in sleep. 😝
@last plaza LOL, so had I, but I grew weary of it
last plaza
How long does it take to do full mowing? Good for large yards?
peak cloud
BLTouch makes a world of difference...I got so tired of leveling every once in a while.
spark orchid
The new Y plate and bed were the real compliment
peak cloud
Took me about 10 minutes to completely mow a fairly large yard today.
last plaza
Sweet!
peak cloud
It's amazing what a little plastic blade can do for your skin. 😄
forest edge
extruder chat
peak cloud
Oh, it might be? It looks plastic.
spark orchid
Here is the Y carriage I bought
SO stable and only 3 levelling points if you love to level
peak cloud
Added that carriage to my wishlist.
low harness
I am NOT keeping up today. Are we talking beard trimmers, lawn mowers or 3d printers?
spark orchid
all of the above
peak cloud
Minus beard.
low harness
And reverse flame grenades?
peak cloud
Hahahahaha
spark orchid
oh damn
subtle pasture
@peak cloud lol @ calling an intimate personal grooming product "the lawnmower"
peak cloud
Reverse flame grenades. Love it!
spark orchid
I just remembered I have to shave tonight, family Halloween costume and I am Severus Snape
Last I checked, he was not a bearded hipster
peak cloud
@subtle pasture It is the name of the product.
subtle pasture
I know, it's hilarious
Also, shouldn't the male version be called the weedwhacker?
spark orchid
I love the commercials for the LawnMower
peak cloud
The commercial is where I first saw it, but didn't really think it was anything special.
clear ferry
The chainsaw on a chainlink
peak cloud
Also, the F Fakespot kinda made me weary too.
spark orchid
I googled a ton before picking that Norelco one I linked earlier
peak cloud
Zed just called himself a hipster. I can't let that go.
low harness
Speaking of layer porn. I had the best first layer ever the other day. It's like the lines fused into a solid mirror finish surface. Never seen anything like it before.
spark orchid
I just turned 40, so I should probably buy one to fit in
peak cloud
Don't give in to the masses.
subtle pasture
@spark orchid 3-point leveling for the win
I have the option for both 3-point and 4-point... 3-point is vastly superior
low harness
I tried to take a photo but my phone couldn't focus. I'll see if I can find it again... gave it to the kids.
spark orchid
peak cloud
Leapo, Did you 3D print your entire printer?
subtle pasture
A large portion of it, lol
subtle pasture
@peak cloud First round of parts was printed on a Delta Go. It has since re-printed itself at least once
spark orchid
Dang, I just watched my own video... cannot believe how loud that thing was before upgrading the board
peak cloud
That's one of the greatest things about 3D printers -- they can replicate themselves.
subtle pasture
@spark orchid I installed TMC2130 stepper drivers to quiet mine down
Noise levels went from "two robots fucking" to "wait, is it on?"
spark orchid
The drivers are soldered to the board on the Enders and I don't have a rework station at home
peak cloud
I personally like the sound of loud stepper motors. 🤷
spark orchid
The SKR Mini E3 was cheap and easy
subtle pasture
Sound = vibration = bad for print quality
peak cloud
Oh snap, I never considered that.
subtle pasture
Granted, you'd need a finely tuned printer before the sound of the stepper motors started showing up in your prints
peak cloud
What do y'all use for your slicer?
subtle pasture
Cura
spark orchid
Mine started skipping steps so I had no real option
clear ferry
You guys hear your printers?
peak cloud
I've been on Simplify3D for years, so I'm bias toward it.
last plaza
Simplify3d has some good options.
spark orchid
I use slic3r when I need to tune layer by layer
subtle pasture
@clear ferry The only time I can actually hear a stepper motor on mine is during retractions, because it's on a 3x gear reduction thanks to the bondtech extruder
So it has to spin pretty fast to retract filament, lol
last plaza
Anyone put dampeners for the stepper motors?
peak cloud
My biggest complaint about S3D is how it handles profiles. I have a bazillion of them, and when I go a long time between prints, I never remember which was which.
spark orchid
It gets hot enough in my garage to melt filament lol
subtle pasture
@spark orchid Perfect conditions for printing nylon >_>
clear ferry
@spark orchid mine is 20-30c year round
spark orchid
@subtle pasture and ABS
subtle pasture
Carbon fiber doped nylon filament is some amazing stuff
odd kindle
So, looping back to our esxi discussion earlier. Do I need two usb sticks to get it installed on usb? Or can I solve it with just one?
subtle pasture
I've used it to print quadcopter / drone parts
last plaza
@peak cloud what print materials have you tried so far?
clear ferry
Two @odd kindle
subtle pasture
You can beat the tar out of it, and it just won't break
peak cloud
PLA and PLA+. 😦
last plaza
You need to advance there! 😝
subtle pasture
Problem: You need a hardened steel nozzle to print it, because it will bore-out a brass nozzle in short order
It's highly abrasive stuff
spark orchid
My next project is a drone, actually. I am migrating the entire flight system from an old drone into a custom body
subtle pasture
Thankfully, my e3d v6 came with a hardened steel nozzle 😛
spark orchid
"wood" filament is nozzle death, too
peak cloud
eSUN PLA+ is by far my favorite filament thus far. It was also the one I tried first. It doesn't suffer from a lot of the same problems that PLA has.
last plaza
Wait until you try TPU and Nylon. 🤣
peak cloud
Doubt I'll ever be able to get them dialed in to print properly on a bowden setup.
spark orchid
TPU is impossible until he gets his capricorn tubing
subtle pasture
PLA+ is nice for durability, but it's not as stiff as regular PLA
last plaza
@clear ferry has a great way of expressing how it feels like. lol
clear ferry
Eh, some of the stuff I ordered from AliExpress has been a lot better than any local filament I get
subtle pasture
The arms on my printer are printed in regular old PLA, because both PLA+ and ABS were too flexy
clear ferry
@last plaza like printing with a limp cock you say
peak cloud
Leapo -- have you ever tried eSUN PLA+? I've heard all PLA+ are different.
spark orchid
I printed TPU a ton with bowden. I switched to dd because the kids wanted so many toys and key chains that it just made sense
last plaza
Micro center sells PLa+.
peak cloud
Microcenter's PLA+ is eSUN rebranded.
subtle pasture
@peak cloud I've printed TPU on my bowden setup, but it absolutely required the bondtech extruder
spark orchid
I really need a second printer because the weight of the extruder slinging about shows up when I try to print fast
clear ferry
Need to try to go DD @spark orchid saw I could print a mount for my stock extruder on the ender 3
peak cloud
I'm still on the stock extruder and hotend.
subtle pasture
Yeah, the original extruder will have TPU buckle and start coming out the side rather than going into the tube
clear ferry
I've printed fine with regular extruder and hotend tpu
peak cloud
A friend of mine has an Ender3 and the first thing he did was convert it to DD, using just some 3D printed parts I believe.
last plaza
In about 6 months of non-stop use, you would end up replacing pretty much everything.
clear ferry
When I changed to the all metal extruder upgrade no more tpu for me
spark orchid
Yeah, the original extruder will have TPU buckle and start coming out the side rather than going into the tube
@subtle pasture drill out the hole on the tubing side of the extruder and pass the tubing through right up to the gear
subtle pasture
@spark orchid THat can help, but I prefer the double-hobbed-gear design in the BMG
subtle pasture
It grabs TPU from both sides and constrains the filament path nicely
peak cloud
See now y'all are talking outside of my knowledge range. 😂
spark orchid
That's cool, this entire discord server is beyond my knowledge range as I have only been running HA for 3 days
odd kindle
@clear ferry cool, thanks
subtle pasture
I mean, you can get clones for pretty cheap. I've used this one personally:
https://www.amazon.com/gp/product/B07QDV7ZVJ
spark orchid
omg, the 2fa at work is driving me nuts
I get logged out like every ten minutes and have to keep grabbing my phone to get my damn text code
clear ferry
subtle pasture
They're texting you MFA codes?
clear ferry
Click it bois
subtle pasture
That's one of the least secure MFA methods...
clear ferry
Yubikey 💌
spark orchid
It is just for our Microsoft services. We use authenticator for everything else
Still have to grab my phone all the time
subtle pasture
Duo integrates with Azure / O365 😄
spark orchid
Also, I am not on the implementation side, or we would probably be more secure
subtle pasture
heh, fair
forest edge
https://printing.eirikz.com
@clear ferry no one wants to see your dildo prints!
subtle pasture
Note: Do not insert any 3D printed objects into your body, they're highly porous and will quickly become bacterial breeding grounds
spark orchid
She said from experience?
subtle pasture
Print, sand/finish, make a mold, cast in body-safe silicone, THEN have your fun.
@spark orchid No, but it comes up in 3D printing circles rather often
Because, honestly, it is a great medium for prototyping such things
last plaza
If you are going make a mold, you might as well make hundreds and sell them.
subtle pasture
But you can't just use what comes off the print bed...
spark orchid
I know lol. I think that's why TPU was put on a spool
subtle pasture
@last plaza Also true
last plaza
Not worth making mold for just one print 😝
There is a business opportunity for you @forest edge
spark orchid
layer lines, for his/her pleasure
last plaza
Yeah, I need to get better at printing TPU.
clear ferry
@last plaza actually make a print you mean
subtle pasture
is onboarding a new client
last plaza
Trick or treat tonight. In a couple of hours, kids will be on the street.
subtle pasture
Their internal domain is... bi.dom
last plaza
lol
subtle pasture
I can't make this shit up
spark orchid
someone there knew what they were doing when they picked that
subtle pasture
Hang on, lemme make a user account named "top"
So you can be logged in as bi.dom\top
spark orchid
make an account called powerbottom
subtle pasture
clear ferry
Make a trust to the domain versat.ile
green inlet
Coding sex jokes, I get lost 😑
clear ferry
Pedro Brian the Mexican oil wrestling midget returns
The third of his name
Like his father and his father before him
dusky plank
odd kindle
vmware have a 20 char limit on passwords 😐 that always makes me nervous
odd kindle
vmwares site that is
clear ferry
I have a different generated password for every site I use, don't see the issue
odd kindle
second question in case you're around. the free esxi version have backups via their api off. Is there good other ways to make backups of entire vms?
clear ferry
No idea, i run enterprise plus 🤣
odd kindle
@clear ferry the issue is that they even check
it signals they're doing something they shouldn't be doing
green inlet
When did it change from jello to oil?
subtle pasture
@odd kindle That's why I just run the trial license, which has all features enabled and no limitations 😂
You just have to reset it every 180 days (the official way of doing this is a reinstall of ESXi, but google will lead you automated solutions)
I wonder if VMWare finally fixed ESXi v7 so you can't subvert the licensing model with a bash script and a cron job...
odd kindle
@subtle pasture ok. Good to know. For now I'll just go with the free version. If I can manage to get it 😐
I base a lot of my trust on companies sites, atm vmware isn't delivering 😦
subtle pasture
green inlet
Downloading their software is a bit tricky if I remember
subtle pasture
Yeah, you need an account
odd kindle
I'm stuck in an "activate account" loop
green inlet
Maybe it was Silabs that was weird
odd kindle
I couldn't get past that link, it even said "If you belive this is wrong go back and sign out". Except I couldn't go back since it redirected me back. And I couldn't sign out because the activate page didn't have any log out button...
subtle pasture
Pop open an incognito window
green inlet
Yea, their site is weird
subtle pasture
Try from there
odd kindle
I just cleared the cache
subtle pasture
That's a bit extreme, but should work...
odd kindle
it did. But I shouldn't have to
subtle pasture
Assuming that actually cleared the stuck cookie that's hanging you up
I mean, I didn't have this issue with their site when I signed up, but that was years and years ago
subtle pasture
Which has a far less restricted free version, with no registration / key required
Oh, and Veeam B&R (which now also has a free version) works with Hyper-V free, but not ESXi free
clear ferry
🤢
subtle pasture
@clear ferry Not my fault Microsoft has the best feature profile in their free version, lol
dusky plank
I'm a simple man.
I click the button I see, I do not enter my personal information.
subtle pasture
You can even do Hyper-V clusters with the free version, which requires a full vSphere license and vCenter server on ESXi...
My only real complaint with Hyper-V is that it's not an embedded OS, so you can't just run it from a SD card like you can with ESXi
So prepare to have some real storage with some level of redundancy for the OS
brisk glen
PXE boot 😛
inner vault
Ovirt is pretty good on the oss side of things
forest edge
I swear Hollywood needs to release a film of just a director beating a dead horse with a bat or something. I mean they already release crap that is essentially that but they need to release the literal version
peak cloud
Oohhhhh yea!
peak cloud
👋🏻👋🏻👋🏻
Today is a good day. So I would say it’s going very well. How are things in your world?
shy comet
its going ok, hanging in there
peak cloud
Anyone here play poker?
wet pilot
had a regular game for a while but haven't recently
hushed basalt
Has anyone ever used a fixed angle sharpener,
like these
inb4 somata says he sharpens knifes on river stones
subtle heath
Hi, i want to sign up to the homeassistant forum. But i don't get an activation mail. I checked my spam and my mail account. Can someone from the admins check this also please?
subtle heath
Hi, i want to sign up to the homeassistant forum. But i don't get an activation mail. I checked my spam and my mail account. Can someone from the admins check this also please?
@subtle heath still no activation mail
clear ferry
This bathroom in my dads new house. I’m 6’1”. The room is so short they had to cut holes in the ceiling over the toilet and sink so you can stand up - https://i.redd.it/n8h5jqsuvcw51.jpg
deft pewter
The obvious answer to that is to just sit when you pee...
Also, only 6'1"? I thought Norwegians were tall?
clear ferry
It's not me, I'm only 6.06 🤣
Or 185cm for not third world countries
Had a friend who is 215cm, when he borrowed his fathers Passat he had to drive with the sunroof open
deft pewter
I thought I was short at 170cm 😄
clear ferry
Midgets 🤏
Or normal American height for both of you
My father's side of the family is 190-210, and my mother side is 140-160, so I'm happy
deft pewter
British... but still pretty average.
clear ferry
The average British appears to be 175
deft pewter
'pretty average'
Like I'm not ridiculously short. @hushed basalt is ridiculously short.
deft pewter
🤏
deft pewter
We finally found something you're above average at.
hushed basalt
Laughs in superior legroom in flights
Seats are generally uncomfortable though since I can never put my feet flat on the ground
Feet aren't made to dangle
low harness
@peak cloud I tried
It’s like the infill fused together perfectly from the bed heat.
Strangely not the edges, though.
clear ferry
@hushed basalt this is what we have superior air machines for 🏇
I never have legroom issues, but SAS/Norwegian/KLM are great airlines
last cedar
@hushed basalt is it for sharpening fixed angles? Do the fixed angles want to be sharpened?
young sigil
Has anyone ever used a fixed angle sharpener,
@hushed basalt Yes. A couple of types. They do a good job if you have the patience. Still fiddly though. Most of the time I just draw my knives through one of these: https://www.amazon.com/Samurai-Shark-Tungsten-Carbide-Sharpener/dp/B018FYPAA2 instead.
green inlet
@clear ferry , 6’6”? #FreakShow
ocean mirage
He meant wide
ocean mirage
that is very old
clear ferry
⛹️
near sage
who knows a thing or 2 about connecting a shelly 1?
trail crag
deft pewter
Celebrating someone's death is not cool.
clever mortar
https://www.home-assistant.io/code_of_conduct/
Demonstrating empathy and kindness toward other people
ocean mirage
I’m not celebrating, but I’m not gonna pay respects to a wife beater
deft pewter
If you're not going to pay respects, keep quiet instead.
ocean mirage
Why
clever mortar
deft pewter
It's almost like there are rules or something.
clever mortar
🤯
ocean mirage
Good answer
dull chasm
why are people so toxic now days .... makes no sense
clever mortar
Because it takes 17 muscles to smile, and only one to raise the middle finger...