#the-water-cooler
1 messages · Page 515 of 1
faster yes... but not killing it...
95.3 and 92.3
link speed reported on phone was only 117 though
doesn't seem slow to me
not slow... all fine
what channel widths do you recommedn for a largeish home with 3 access points
20 / 40 / 80 ?
I typically use 40
you don't seem to be negotiating rates for 80 though
i think that's right
you need a lot of free spectrum to really get 80, depending on your environment it can be hard to do
k
40 is a lot easier... finding two contiguous channels at the same time that aren't trashed is pretty easy
do like the unifi gear, my mate needed an AP in his "shed"... i helped him set it up yesterday painful...
people seem to like it, that's for sure
@tawny radish so i have two 5ghz capable APs a lite (kitchen) and pro (landing) and one on the front of the house (old 2.4ghz only).
am just checking the setup in the controller...
2g is easy, they are set on channels 1,6 and 11 (low power)
i think that's a given
wifi
maybe i should change the 5g a bit... although it ain't broke !
haha, ABT, always be tinkering
power levels, channel widths and channel for 5g are the questions on 2x APs
looks fine
works good..
my mate in his shed was confused as hell by the POE aspect...
and then he didn't have a spare ethernet cable...
we eventually got it going, he provisioned by the android app (no controller)
i want him to buy a small POE switch, makes life so much easier
I'm off. Best of luck with it but I think you're in a reasonable spot.
Now try doing manual adjustments for 1400APs with quite a bit of overlap ;-)
Just installed my Xiaomi Air Purifier it is saying my AQI in my bedroom is between 0 and 1, feel like I might not have needed it 😅
lol it goes to 3 or 4 in my garage, but yeah given AQI outside is around 5-10 I suppose its not bad enough here
does this thing measure CO2?
I wish I had NBN FTTP
dont we all
@ocean mirage nah you want a eVOC/CO2 sensor for that, I have an AMS CCS811 and Sensirion CPG30 doing that
But if I had 100 up I'd open plex up to a few more people
Same telco, on both points
I get 500 up at work
Plus if I was still in the content industry that would be gold
500/500 would be better :D
perks of using education network AARNET
:(
Fastest down I did hit 1Gb
We should just nationalise our network
Yeah I'd rather have 100/250 than 250/100
plex users and etc
Pay Telstra the same as what they bought it for plus inflation. Minus their asset sales minus their neglect
So about 10% of what we sold it for
I never got the whole plex users thing I never shared my account with anyone
Emminemt domain
Like its my media, everyone else can get screwed
Family?
Why would I want to waste my internet on randos
Not randos
Yeah its full of Family Photos
Screw randos
and Videos
You just select the libraries you want to share
Giving is nice
Are you getting paid for this?
No
Steal and hurt the poor Movie industry
lol
nah jks I am not one of those folks pirate away]
Piracy is praxis
All ripped movies
I really may as well share, its no real effort of mine
You just need the bandwidth
yep
There should be a soft ping function
along with seeding torrents my uploads can get maxed easily enough
Ping someone but doesn't notify them until they next open discord
but my users are mainly old and dont care if I transcode to shitty resolutions lol
yeah like a here ping for specific people
usenet?
Much better organised high quality content, and no nazi ratios to maintain
Yeah
Plus no seedbox or vpn needed
Trackers than forced ratios were dumb
no seedbox or vpn needed with private trackers really but I do see the benefits
its just not worth the $ for me
private trackers are really organised and high quality anyway, and a little better for finding obscure things I believe
Private trackers can still have DCMA actors on it
I would never share as it has home videos of when I was 1-9 years old and my family as kids
You'd just need to organise those into a different folder
Yeah i have all of that too
You just share specific libraries not all
Movies and TVs are their own libraries
And videos and photos are other libraries not shared
I even set up a request service thats never used lol
Mine doesn't do either, she feels bad asking for things
:D
You can use imdb watchlists for movies
Not tv shows but thats how I do all of my movie selection
Radarr/sonarr are a pita to log into
ah yeah
I normally just do them directly in radarr/sonarr, I dont mind
plus then I can manage profiles and which folder they go to
Morning
Afternoon
Your from the US?
I'd love to have some dark fibre going to the backbone networks
10,40,100Gbit, uncontested.
yeah it'd be a bit nice
Wouldn't even want to think what that would cost
🐨 🦘
I even gave you the flag
[The Infinite Monkey Cage] Conspiracy Theories #theInfiniteMonkeyCage
https://podplayer.net/?id=93391725 via @PodcastAddict
{{ description }}
The Netherlands only makes eurotrance and other needless stuff
So not much
Tbh, I can't think of a single Dutch artist I've listened to outside of the 90s eurotrash
I have a friend in Venezuela and he is obsessed with Men At Work
@clear ferry what's the fastest speed someone can push bidirectionally down a single dark strand?
In production use, not theoretical lab experiments
Medium range. Say business district size.
@hushed basalt single? No idea tbh, that is telecom stuff, I've seen 10g, we do 100G on BiDi in switches atleast
How many strands is that?
Probably, single strand is it's own thing
With a very lean 1:128 multiplex
Let's say 1:64
Actually I have no idea what ratio GPONs use
I prefer customers who buy two seperate two strands and run DWDM or cwdm on that, and get out 4-8 frequencies
I'm just trying to see what the ceiling is with our current technology on fibre
Let alone what's possible 20, 40, 100 years from now
Time to make atxbyea our telecommunications minister
10gbit for everyone!
You get fibre, you get fibre, you get fibre!
No bees were harmed in the filming of this episode
nobody would hurt a lil bee
Filmed in front of a live studio audience who can not be named due to pending federal prosecutions

Symmetrical too
holy au/norway take over
lol
Peak hours are when both are online
I don't see those as peak
What's your guys ''Best'' automation?
I like the one i use for my radio at night.
I have a Sonos , deconz and some lights and Fyrtur window close
Well is opposed to the trough hours when the seppos are awake
I have a Ikea remote that i have a button on. This turns off all lights and closes the fyrtur. Then it starts Sonos on 0.13 volume on my favourite radio station with a 1 hour timer.
@ocean mirage dafuq is a seppo
you listen to radio every night within fail or you have seperate button that does both and not the radio?
without*
Best ... managing the room lights automatically
@ocean mirage dafuq is a seppo
@fading zodiac American
Just the basic
the 5$?
Aye
Because at the time it was the only choice, and I'm too cheap to spring for the other one 😉
Why'd you pick a subcription?
I felt it was worth supporting them, given the amount of use I make of it (here and elsewhere)
Same reason I buy subs or similar for things like Plex and others
You know you are in Norway when you walk past a parking lot and 15 of 25 cars are electric
Only in Schipol 15 times or so
Good old Schiphol 😄
One of my favourite airports in Europe
Certainly got a good range of food options at least - I've eaten far too many meals there 😬
Why is that?
I hate it nowadays
I used to eat a Kroket there
now they got rid of it >.>
I've flown through many airports where there's a really limited number of food choices, or they all fall into the same basic categories and there's not really choice
Nice to have options - boring eating at the same place/the same thing every time
it does not matter
I like the second, but I think the first is the most common
I have a bad habit of using both
Just do this instead:
trigger: [{"platform": "state"}]
I'd say
oh no ... now you're confusing me 🙂
BUT ... just out of interest, how would i then add the entity_id ? ... trigger: [{"platform": "state", "entity_id": "sensor.this" }] ?
Yes
but then .... what about .... for: minutes: 10
Knowledge.
trigger: [{"platform": "state", "entity_id": ["sensor.this"], "for": {"minutes": 10} }]
ah yes of course
@fading zodiac wasnt trying to achieve anything, just trying to follow how this alternative notation would work
Oh okay
At one point I had all my config like that
whats funny is that i used to run a team of about 150 developers and testers, and one of the things they used a lot were YAML configuration files.
but i had never used those myself. only when i got into HA, did i start using them.
Now you know why they complained so much 😉
That's probably a safe assumption 🤣
😉
so i might be switching to a fiber connection soon
and the ISP is using Huawei modems!
not something i'm looking forward to
not so much for the security implications
but rather, in aforementioned job i worked on the same floor as Huawei .... and dear oh dear are they a loud bunch!
I have a ZTE , that's why.
I don't live in the Netherlands
Aah okay.
"AIS"
you know i dont even know what that stands for
but i'm going to venture "Advanced Information Systems"
Advanced Info Service Public Company Limited
Used on boats 😂
Close 🙂
Your in Thailand!
I am 🙂
Rip
Well their SEO fails
AIS doesn't bring me to them.
i had to google the whole name.
it's Thailand .... everything fails
looks pretty on the outside, but ... don't go beyond the surface 🙂
I'm assuming you're in NL, given you guessed I was on KPN i'm assuming based on my name?
ah ok
What would your name have to do with it?
It's a very Dutch name ... Dutch people would recognise it as Dutch 🙂
well, if you had figured I was Dutch, then KPN as a provider would have been a sensible guess as it's the biggest in the country at a guess
(that is a guess, i've been away a while)
to thailand?
(sorry had to help the mrs)
bad luck, i guess
was meant to go to work in singapore .... ended up in bangkok for what was meant to be 1-2 years. it's been 14 now.
Anyone know of any smart energy monitor than can handle more than 2500w? My Xiaomi SMart Plug is tripping due to brief inductive loads above 2500W
Never used to be a problem but started recently
I'd ask in #hardware-archived - remember to provide the usual information 😉
It worked perfectly for ages might buy a new one to check its not defective, I suspect it might be rated to 240v 10A by aliexpress but really a 220v product that isn't dealing with 2500w very well
The VA would be the limiting factor in those no?
Not the real power.
TBH I doubt anyone would ever make a plug like that with only a 10A plug on it. And I don't know of any 15A ones.
You're better off with some CT clamps at that size
Hello I am new here
Welcome 🙂
Can we ask question in here
NO HOME ASSISTANT SUPPORT HERE (look at the other channels for that). NO POLITICS OR RELIGION!
BE CIVIL to one another or get BANNED permanently.
☝️
As long as it's not HA related, ask away. If it is, find the relevant channel 😉
Each channel has a topic explaining what's relevant, you can find that at the top of the window and click on it to expand
But first, make sure you've tried to answer it yourself first :D
Technically, they already asked a question 🤔
They used up their only question credit, shame.
Ping mods and ask for them
Oh we got enough
Only we may ask questions
Yes
Folks keep forgetting to look down the back of the sofa, it's amazing/scary what you'll find (or what'll find you)
well there's this one guy
he found his temp sensor
@gritty fjord You
^
See?
POANG
Most creaky chair ever but I love it
😂 why?
@gritty fjord pmed me that, because he asked in #zigbee-archived earlier if there was a way to find a device just from the software
how would you do a backup of something like plex/emby? not the content but the setup of the config?
The config for what? FORBIDDEN TOPIC?
the Plex config isn't much
why would you care about backing it up as it's like 3 minutes to start completely from scratch
?
where should i talk to someone about buidling a sensor
Oh. I thought you meant a physical sensor lol
You're good
i have that for average temp..
#templates-archived would be where
@last dirge the database is the only thing worth backing up
MEH
even that's NBD, just bandwidth to rebuild
unless you care about the watched statuses
database also contains the "cover art" and the details about the media too
mhmm..

phail'd
Its an cloud instance - got some mtu issues with the runner 😄
What happened
well.. look at that
Now only have to fix this deam x509 error - I KNOW THAT IM NOT TRUSTWORTHY 💢
@scenic radish homekit died AGAIN
Im starting to wish I went with ring at this point....
oh god, call center from india
Hi
got an esp32cam w/ esphome
working
I can't use camera.snapshot service
nothing is saved whatever the file location
@white crane #integrations-archived
Ok thanks
@clear ferry Why must you vomit all over my preferences ??
oh man, where's that quote about homekit when we need it?
@wet pilot I all-ready dumped homekit video cameras for something far far better
@clear ferry TPLINK, WINDOWS, UBIQUTI, UBUNTU, HOMEKIT, RING, WINK, ITUNES, LOTUS NOTES, SUPERMICRO, NORTON AND AVAST with TOOLBARS, ADOBE FLASH, WINDOWS XP and VISTA, INTERNET EXPLORER 7, thoughts?
🤢
haha

Do you like any of those?
literally none 😄
NORTON AND AVAST with TOOLBARS, cmon? this is a thing of beauty
you forgot yahoo toolbar
Ah Proxmox is great though
🤢
VMWARE 🤢🤮
@clear ferry Don't judge people's preferences, some people may prefer the convenience added by using toolbars.
bonzai buddy 🤣
You aren't even old enough to have experienced those toolbars @rare condor I WAS THERE, THE THINGS I SAW
anyone have a new install working on oracle virtualbox?
@clear ferry I was the kid downloading rollercoaster tycoon on limewire and infecting half the PCs at our school, also our school was poor we had Pentium 2 machines and some old Macs
Pentium, what a recent childhood, we had 386s 
It took literally 20 minutes to boot any computer, I remember our clueless teacher telling us to rub our computer as they were cold and needed to warm up to work. So any computer class we would get out jumpers and cover the machines to warm them up to make them faster. We would push paper into the PSU and fan to stop it blowing away cold air and slowing it down
I would help by taping over the fans vents, I got a gold star for staying back once recess to tape over the fan vents.
@untold wraith #330944238910963714 if you're talking about the Home Assistant OS image
yes
~crosspost @untold wraith
@untold wraith Please DO NOT cross post. Read the channel description, post it and wait for folks to respond.
i have tried the vdi, vdmk of 3.13
You asked in the right channel - over in #330944238910963714
NO HOME ASSISTANT SUPPORT HERE (look at the other channels for that). NO POLITICS OR RELIGION!
BE CIVIL to one another or get BANNED permanently.
thanks
lets see, the new HA beta has homekit camera streaming
alright i give up, i'm gonna look for a "prosumer" router
i still don't need anything crazy though
ER-X + i don't know what AP
ER-X or USG should work for you since you aren't pushing gig
condo right?
though you just got that tplink thing right?
ah, was gonna say you could just keep it and just make it a wap
there's even something like this that's cheaper: https://www.amazon.com/NETGEAR-AC1200-Wireless-Access-WAC104-100NAS/dp/B01LFSDZCU/ref=sr_1_5?dchild=1&keywords=access+point&qid=1589816896&sr=8-5
i don't know if any of my clients support > 867 Mbps anyway
nor does it matter since i have 200 down and don't do a lot of intra-network file transfers
well, and when i do it's over wired anyway
for unifi, nanoHD, InWall HD, FlexHD would all be fine. They're all $179 retail
identical speeds, flex supports mesh
If you're going UniFi anyway, go with the USG for your router
Then you can have them all in one pretty management interface
The ER-X is a different range, different UI etc
that's late model but should be plenty
yeah i don't need anything insane for a router/AP, plus in the future i could get a different AP to use with the router and use this AP somewhere else
🤣
lol not a chance
lets hope they do not charge you stocking fees for returns then
both items i sent above are free returnz
🤢
oh? we are already at 2 returns?
lol i meant the two images i showed in the messages above
only at one return currently, the tp-stink router
$81.45 after my amazon credit for the ER-X and AC AP lite, not bad
delivered tomorrow 🎉
why would you buy a router that does 1 Gbit half duplex
do you hate yourself or something?
i have 200 down...
and this is why my wife lets me buy the toys
Or a string and two foam cups 🤣
does eero support ipv6 port opening?
that is, apparently, a question i need to ask based on my experience with the tp-link router...
Haven't switched to the beta
DOIT
Tasker is about as important to my phone as HA is to my home 😛
lol that's fair
I might switch the tablet over though
i actually use tasker as a notification sound manager
i have most notification sounds throttled to not play more than once every 30 seconds like in the event i get a bunch of texts at once
plus being able to assign sounds based on text in a notification is nice in the event that no notification channel exists for it
Fastest one yet 👀
Switching to a better server was a good choice
Yeah, I'm also looking forward to the boost 0.110 will bring
I'm actually back on 0.109.6, but yeah i'm looking forward to 110 as well
First day at work after 9 weeks. Feels weird!
Yeah, two months off will do that to you 😄
Elevators
Those wierd creatures are people
lol. That’s not our office, but it feels that way.
Only 2% are in the office for next two weeks, and then 30% by June 1.
Schools are also in their last week now... after that summer holidays for kids.
😂
you guys got a break?
Left leg...
0.110 = cameras in homekit 😛
HomeKit has to be good for something, beyond just frustrating folks
Not really
paperweight
I lovve waking up to find parts of my messages have been sent to the wrong discord server lol
was talking in a bot spam channel yesterday for like 5 mins
@last plaza most stuff is back to normal here now , except festivals, concerts and summer vacation abroad
norwegian standard practice is the baseline of a quarantine procedure
Any recommendations for motorized patio shades ?
@forest edge exactly
I asked ludeeus if I should buy him a symfonisk, he said no because we'd rather not meet other people

@tidal bronze like an awning or like roll-down shades?
Roll down. Don't want to do DIY
there's a shitload of companies that do that for interior
I'd be really surprised if they didn't allow you to change out the fabric to that perforated shade cloth stuff
The common one is coolaroo for outside but looking for others as well.
Costco had those on sale a month or so ago
Damn missed it.
looks like HomeDepot has SeaSun
Costco's got Koolspot
tree fiddy for a 8x8
doesn't say if the remote is RF or IR
looks like it's IR
could just bypass the remote and just hook in to the motor directly with a esp or something
Looks like the remote is common RF type.
i'd much rather DIY than IR or RF
@tidal bronze looks like this one https://www.koolspot.net/product/remote-control-14rirc
non-deterministic states bother me
Things that bother you 🙂
i'm not as 🤢 as @clear ferry
@tidal bronze can't figure out the strange issue with the led strips, with one of them everything seems fine, but any of the other three the LEDs are twitchy and even show wrong colours on some LEDs when doing effects in wled 
@last dirge syncing 5 shades You can now control each shade individually by selecting their channel on your primary remote or you can control all shades at the same time on the primary remote by lighting all five (5) channels. Press the “channel increase” or “channel decrease” buttons until all five (5) channels are illuminated. how does this work lol
thing
thing2
@clear ferry start from from the 2nd DI and test, skip few led's
@tidal bronze I'm not rich enough to necessitate such things
The black one behaves like a champ, the white is a see you next Tuesday
you sure you've got the signal connected at the right end?
Skip the 1st or 2nd driver and test @clear ferry
Aiiight
5V LEDs
Starting a new WLED project for pergola. 1312 leds. Going to be fun
Costco's had some killer deals on timber Pergolas
too bad I've nowhere to put one, they're useful
I have 800 waterproof ws2811 I want to use for Christmas lights 
I don't like the waterproof strips. Just a pain to work with. Easier with aluminum channels
@slim vortex did that
I know this isn't technically a home automation question, but it has knowledge overlap so I figured I should ask here
Where can I find a controller for LED strips that's addressable but not Wi-Fi or infrared remote?
Gledopto
The internet
I'd like to be able to address it from the PC they'll be inside so some sort of motherboard connection :/
ludeeus, you win the award for technically correct
Then good luck
I'm probably going to be pulling the power from Molex (5VDC)
You probably want to ask that question on some PC modding forum/Discord
That's not exactly what anybody here is looking for 😉
I have, just copying across here because I know LED strip knowledge is also common here
LED strips, yes. PC motherboard connected strips 🤢
Costco's got 2-pack of Honeywell Z-wave (non-plus) switches for $45
Sure, but we mostly deal in #diy-archived and #zigbee-archived /#zwave-archived
i'm tryna assemble an order on aliexpress but can't even figure out what to search basically, i just know i should be using ws2812b
Corsair has some led case controllers you probably can missuse
@tidal bronze skipped two, they still twitch
There's likely to be USB connected digital LED controllers
corsair and brand-name is expensive
there is something about making the kids of millennial's rage in games in the middle of the night waking their parents that really warms my heart.
@clear ferry can you drive like 5 segmens
Same effect, top one the white, lower the black Led https://imgur.com/gallery/iWE7iDb
you controlling it with your stompboard?
Not clear what's happening. So both are same length?
Roughly same length yes
You can supply power on both ends and test
or if you want about halfway down
I could try that
that's why you're getting the blinking
What PSU are you using?
A 15A 5v one
If you drive the problem one at 10% brightness same issue?
the top one looks a hell of a lot brighter
the LEDs themselves might be different and pull more current
Good point
try what he just suggested and pull the brightness down
if you're using WLED you can also check the calculated current
15A should be plenty
That has nothing to do with it
That should limit it atleast
Aye, I'll give that a go
and that was the last we ever heard from atx
remember, white = all 3 LEDs going at once
limiting brightness AND only using red should be significantly less than a third of the current of full bright white
I gave up trying ledfx in ESXI lmao
lol
man I bought these SSD1306 screens....i know they said 0.96 inch screen size....a lot smaller than i expected lol
surprised at how much info you can fit on them though
What was the problem @tidal bronze ?
And ledfx only supports the audio stream via usb?
it supports onboard mic too
MS sound mapper as well. But ESXI does not support what you hear
makes it nice to use on a laptop
Oh, if you only could get it to use a UDP sound stream
Unless that is too much latency for you
I can adjust the delay using CC audio.
I am using a ledfx audio group for chromecast. So anytime I pick that group shows up on grouped wleds
@shy comet try this. Inner strip only for bass and outter for waves. 😆
wow lol
What strips are those? External IC so 2811?
quad runs an exclusive night club at night, like those you see in movies where it's real hush hush and completely illegal lol
infact i think liam nelson showed up once looking for his kidnapped daughter there
@clear ferry 2812 12V. I don't use 5V
Oh I've never seen 2812 with external ic
can i plug a 5V strip into a 12V motherboard header 🤔
Lol wifey wanted a smart coffee pot so it would start in the morning for her.... This is what she got instead
hey it's reliable
lol
doing my own local object detection
f the cloud
@brisk glen Hey, may I ask what is your concern with cloud integration?
is it a service you are paying for? If not, it can go away at any moment with little to no warning
Cloud 🤢
even if you ARE paying for it, it can still go away with little to no warning
usually get a bit more warning if you pay for it
they want to at least pretend so the FTC doesn't give them a curb-stomp to their golden parachutes
@clear ferry you should get that stomach problem checked out
I just chewed down on two antacids THANK YOU VERY MUCH @fathom sparrow
lets test it out
@clear ferry cloud
🤢
whelp, i'm sorry, you have hephesyphleflaids
I knew it, that sløtt @scenic radish gave it to me



Anyone have experience pairing the harmony remote to the emulated hue?
Sounds like an #integrations-archived question
🚗 
Robot Chicken Pirates - It's driving me nuts
I should buy this
funny when people put in above ground pools then try and spruce them up and hide the fact it's a cheap abovve ground pool lol
better than no pool, i'd wager.
pools can actually cause houses to not sell
the few who want one really want one but the ones who don't really don't
lotta stuff can do that, but if you plan to die in it, booom, do whatever you want.
does 12V WS2812b exist?
short answer, no.
pools are expensive man
we have an above ground pool one and i cant imagine hwo much more expensive it would be to have an in ground one thats larger
guess I'll need WS2815?
@shy comet just more chemicals to the mix ect but the pumps and what not are relatively the same cost wise
im talking more about the electric bill with the filter
larger pool is gonna require more time with the filter on
I dunno, i always thought that was just time based
yea it also depends on how much they charge for u electricity and how much uve used....in LA the prices keep going up
weird in what way?
@shy comet i don't think electric cost would be that much different between size of pools unless you were comparing an Olympic pool or something. The only real difference between the option of allowing the pool to automatically circulate various times of the day which is optional and something I think abovve ground pool owners don't generally do
@forest edge for pools you go by how much water the pool can handle. Mine is about 7k gallons and according to intex i only need to run it for 4 hours a day...Intex sells above ground pools that require 10 hours a day
then tack on heated pool for those owners too which i have heard some can take hours to heat up
me personally i use solar cover lol
haha yea
i also went hte salt water route which has a more expensive filter but easier maintenance
i didnt want to mess with chemicals and such....adding bags of salt as needed is easier lol
interesting
I don't know anywhere around here with a saltwater swimming pool
pool chemicals do suck tho
dealing with ph levels and bromine on the hot tub is a major pain
yea for me when we start up the pool i add 160lbs of salt
then wehn the system gives me teh low salt error i add 1 40lb bag
lol suprised you hadn't HA automated that task
lol the only automatoin i have for the pool so far is to notify me when the plug needs teh reset button clicked lol
im actually about to add a water temp sensor, ultrasonic sensor for water level and ambient temp
@shy comet above ground ?
yup
it floats
Thats not the norm in LA.
wheres the best spot to post about getting help to create an integration?
easier to put inground pools when all you dig through is sand...
@tidal bronze yea we got it when we moved in the house....its actually really nice and more like a giant jacuzi than anything
so relaxing to just hop outside and take a dip
I have in ground pool/spa electricity is not that bad with variable speed pumps. Water is of course a problem. Lol
yea we dont keep our pool on all year though
Mines heated so year around.
nice
yea so i made the mistake of ordering normal ultrasonic sensors insted of teh waterproof one loll
@hushed igloo if you need help with creating an integration yourself you can ask in #devs_add-ons-archived but if your lookign to find someone to make an integration there is no channel for that
didnt even know there was a water proof one lol
I am adding a separate dwp meter cant deal with these crazy sewage charges.
@forest edge cheers mate
@shy comet do you have 1 or 2 water meters ?
@tidal bronze we have 1
I am adding a separate dwp meter cant deal with these crazy sewage charges.
@tidal bronze lol what?
many places tack on additional chargers to account of additional storm run off
Sewage is a percentage of water use. So pool and irrigation is calculated as sewage as well. Just freaking dumb.
They let you add second meter.
I have my irrigation line separate from home supply.
here there is no meter
@tidal bronze minor correction.....winter water usage 😛
Lawn drives me nuts man.
yea
we had a leak when we first moved in and didnt know it was there
our sewage was like almost 300 a month or something like that
Wtf
so i had to prepare a $30 gardenere bill to repair the busted line
got like $2k in credit
Nice.
you guys have actual sewage meters? or you just refering to your water meter?
Percentage of water meter
Lol.
But its just not right. 70% of my usage is lawn. Nothing to do with sewage
Waiting for my permit to come in for second meter.
if you dont use water during dec/jan you can essential zero it out lol
they only calculate it during 1 bill in the winter
I still have winter usage. Dogs jump in out the pool. So thats a crazy amount.
haha
2nd meter $800 installed. Money back in 7 months.
wow
I calculated like $40 or $60 actual sewage usage.
But its just not right. 70% of my usage is lawn. Nothing to do with sewage
@tidal bronze for just 25 cents a day Dlamini could learn to read and write and have fresh water to drink from.
I don't get how a second meter would fix the issue if they are just using a formula based off your normal water use
No formula after 2nd meter. 2 readings. Seweage charged only on house meter
and they will go through that trouble to read and account for the second meter?
Yes
wow, you got some nice city hall people lol
For the price we pay better come wit some chocolate cake as well.
if i did that here i'd have to dispute the bill evvery month using my meters readings as leverage kik
lol
they just replaced our meters infact so the dude dosen't have to walk the neighborhoods
now they can sit on thier ass and overcharge me without evver getting up out of the seat
hmm gotta buy it through them and You may be required to periodically calibrate the private sub-meter per manufacturer's specifications and recommendations and send the results to the City. they have a means of disputing your claim lol
plus when you move what happens then? preset for the next owners? or do they remove it? lol
water well and septic tank == no bill
septic tanks suck
nah been on them all my life
So I'm buying LED strips...
Seemingly WS2815
Does a motherboard count as a "controller"?
lol you just allow it to overflow and run off down a hill or do you actually pay to have it serviced and cleared?
if you add rid ex and have fill line ....maybe pump out every 10 years
10 years?
you must have one big ass septic tank
most I ever gone was 3
2 is about average
damn gotta get bigger than a 55 drum
gotta stop holding those turds in, not healthy lol
Bc I have one of these and I'm truying to figure out if I also need a separate controller for the leds
farm house originally just had a pipe that emptied into the field on a hill. I don't remember how it was discovered by the county but we had to put in a septic tank afterwards and i am glad I don't live or have anyone living out there atm lol
@dusk lodge what are you exactly planning to do?
^
ok?1
you don't need a seperate controller for that
you just need the software to control the outputs of those pins
put a garden by tail pipe and you good to go 🤣
So just the LED strip is fine
I assume it has some sort of "ends" that can plug into those 4 pins, i.e. I don't need a power supply for it as it'll get 12V from the board
@dull chasm the pipe was concealed I can only assume the "run off" snaked it's way to the road or something, but heck that was every bit of a few thousand feet away. OR some county asshat was trespassing and stepped into some doodoo
@dusk lodge they make pc led strips that would just plug into that. probably be wise to look those up cause they would be made to handle the power vs amount of leds on one strip ratio
yep but cow shits in field and perfectly ok .... for now 😂
if your refering to that global warming thing...
not sure what to make of all of that
no thats the farts
@forest edge They're expensive af
@dusk lodge yea but would give you an idea of what you need, is the point
okey
@dull chasm how you been man?
busy busy this has been crazy
the end of the 2815 on aliexpress looks like that
looks like that same 4-pin header i think
except it's also male lol
The motherboard header is not a pixel header. Its just a basic RGB header.
what's a pixel header
Soooo
No addressing for me 😦
Can I still use addressable WS2815 on an RGB header?
I just need to get a 12V strip that I can stick inside my case and address through an app like AuraSync lol
Anyone likes spicy sauce, this is the bomb! You can get them from Costco. Not too spicy, but amazing!!!!
what country
yugoslavia
what country
@ocean mirage Costco is mostly USA. Although I’ve heard they have in other countries like Japan.
Oh I know Costco, they are in at least a dozen countries, I just meant which one is this costco in
I take it the USA
Yes.
Rules of the internet
Everything is a white american male in their 20s-30s unless otherwise stated
:D
Sometimes they bring in new items. They don’t have them all the time. This is the first time I found it there.
I don't go to the costco here but I know some people that do so I could get it if they have it
unfortunately its basically impossible to browse their stock online
I have t been to Costco for a while - mainly due to covid and long lines outside. Went there during the weekday, little less crowded.
Some states are worse. Our place is still ok, folks got panic and started to hoard too soon too much. That was the problem. 😊
yeah we had that for a second but it fell over
I honestly think some people thought there is going to be apocalypse.
The panic spreads quickly.
Ska, do they have Carolina reaper flavor.
lol - not familiar with that one
Bhut jolokia, perhaps? Same thing
I can eat the most spicy food that is available on the planet - tried so many of them over the period of time...
Bhut Joloka is same as Ghost Pepper
How do you biatch slap someone on discord. Every time @hushed basalt hates on the US of Muther F’n A, he needs a discord biatch slap. Is that what 🤢 is?
little thai chilies can pack a punch
I love hot hot hot. Carolina Reaper was once the king. I use Ghost Pepper like ketchup
same here!
I like Buffalo wild wings Asian zing boneless wings
when I go to BW3, I ask for #9 hot sauce..... only because #10, their top hot tastes like vinegar.... I stick with less vinegar, more hot
I do BWW hottest....meh
There is a place where I live that blew me up though one day Ska.....was a paste that was fabricated in the lab. One wing and I couldn’t breathe. Ended up reverse eating three times at 3 am
bdubs mango habanero is usually my goto.
I'd like the blazin wings if they actually had any flavor
They're just tasteless heat
Though it's been a while so maybe my memory is different from reality
Planted my habaneros, jalapeños and Carolina reapers this weekend.
one time my neighbor brought a handful of habaneros, and told me they are so hot, he can't even touch them... I grabbed one from his hand, and just ate it.
I've got 36 habaneros to plant, among other peppers.
Same with habaneros...good heat but I don't like the flavor
Yea, habaneros are like green peppers
we plant thai chillis, and hot Indian red chillies... and of course ghost peppers
I wish the local nursery wasnt so picked over
I had a Vietmaniese (sp) friend when I was younger. He handed me some white thing out of a salad that knocked me on my butt. I bet Indian red chilies are hot
That’s my favorite, that and asparagus pee. I am warped though
lmao
They need to make an asparagus pee scented candle
I'm sure they are available - folks are pretty creative these days
How is Ohio with the vid?
I went back to work today.... most businesses are open now - some still locked down like day care centers....etc
Kinda weird what the new normal is. Sure in time things will balance out.
feels weird to wear mask and talk to your co-workers
Everyone is wearing masks at work?
yes - we are required to wear masks
What kind of work do you do
the conference room capacity is now significantly reduced now - we used to have 20+ people, now we have 5 max allowed
Work in IT
Ah okay, same and technically we can go back to the office but we are all still working from home
did you have the option
yes - we have that option, but we are trying to get some percentage of population back to work - like critical workers and those who need to be in the office...
@green inlet it's such a low hanging fruit. Like meleeing sleeping grunts in Halo
only 4 people are allowed in elevators - not sure how that's going to work for a 40+ story buildings
Aren’t you an Aussie Badtelco?
take the stairs then
lol
I lmao of at these
Speed run. Get ripped at your work
I can, but then you have too many folks taking stairs, and gasping, and exhaling more with mouth wide open 😂
Or take your helicopter to the roof and abseil down
Rainbow Six it
You eat those every day right
it is better to let folks in elevators, than force them to take stairs 😛
I don't know about anyone else but all I eat is bunnings snag
Aussie Bites? where do you get them? looks like all good stuff in them
I had to laugh. Like what makes them Aussie bites
Do canadians eat canadian bacon every morning
Why not British bites
Its so exotic
those look like for a heart patients!
quinoa, flax seed? omega-3....
I am a health nut Ska
looks like they are for high cholesterol patients 😉
My FIL gave me some vitamin C and zinc drink powder stuff
@green inlet tried dipping them in hot sauce?
never heard of zinc powder - vitamin c we use it all the time
It’s for when you get sick
So i took the powder twice a day and didn't take sny drugs
Prob worked
Vit C is good! it is a must for us at home - especially during the flu season - we eat way too many organic oranges every day
And was fully recovered in 48 hours
Yup....zinc is good for cold/flu
Normally a flu would knock me out for a week and I'd get secondary bronchitis
I need to check our local GNC stores
I was perfectly fine friday at 10am, and by 11am I just wanted to crawl in bed or under a shower and sleep








