#the-water-cooler
1 messages ยท Page 498 of 1
Come back when you have -35 you kangaroo
Yeah, but you live in the land of poison and fire
It's a nice time of year
No heating or cooling needed
Which is important because our houses are glass houses in summer and leaky tents in winter
Should build proper houses
any experience with any rasberry pi battery hats that works? just need enough running power for a healthy shutdown
can't you just use a USB battery bank that allows pass-through power while charging?
@late gate my manager uses the ups hat
He is pleased with it at his cabin where power can go out
@clear ferry would if I could
Arghh why are power supplies so noisey
I swear half the switch mode power supplies I've ever owned are whiny
audible noise or electrical noise?
We are not allowed to have a green house or a shed in the backyard. Thanks to our HOA.
I can do whatever I want in my back yard
"Dr" Phil
@hushed basalt audible noise is due to inductors not capacitors. Caused by magnetostriction of poorly secured windings.
@last plaza lol fricking hoa
@last dirge we also bring a few plants indoors during cold weather.... then we move it outdoors in summer. We don't start growing inside, not worth it... we just buy grown plants and take it from there for summer vegetable garden
55 is okay as long as no freeze weather
and the tomato plants will drop their flowers if they get cold so I've been having to shuttle them back and forth
yeah... if they have flowers, better to move it indoors... you can cover plastic sheet on it
any soil temp below 55 greatly increases the chance of them dropping flowers
they don't mind being inside in the 74 degree weather
yup
we only plant outside after May 15th usually... that's safe outdoor weather for us
3 more weeks, we will be spending more time outdoors - something to look forward to
The rule I've heard for tomatoes is not move them outdoor if weather is going below 17c
17 degrees celsius = 62.6 degrees fahrenheit!

yes, 62 degrees is pretty safe to move to outdoors ๐
Yeah, mine are only a few centimetres tall so far, but if this weather keeps up I might move them out in the middle of may to the greenhouse
Yes
Mostly tomatoes this year, a few chillies and some aubergine
And I have a lot of strawberries I've grown from seed in its own patch
nice! we grow tomatoes, chillies, pepper, okra, egg plants, cilantro, basil, and other varieties
them too - berries of two different kinds
Poor time for planning this year as I have to baby sit for the most part, so I focused on the tomatoes
And hoping for a big yield
we only got male blueberry plant a few years ago, it stopped fruits as there is no female plant.... didn't know that time, and had to buy female plant ๐
My cherry tree and apple tree has already started forming bulbs
we planted 10 tomato plants one year, we had heaps of tomatoes... never doing that again - lol
we only plant max 3 or 4
sweet.... cherries and apples!!!
Had a lot of aubergine last year, tomatoes not so successful
And I have blueberries, red currant, black currant, gooseberries and blackberries too
we like egg plants, the leaves get small bugs, and get eaten... every year!
gooseberries - never heard of them ๐ฎ
Tried planting some over winter carrots , beets and such, but winter wasn't cold enough for them to sleep in peace
we don't get gooseberries here... they look interesting!
we planted Taro roots, and they died last winter ๐ฆ
Gooseberries are awesome
looks like it... I have to try them!!! they look nice!
Oh, forgot I have raspberries too
wife saved mango seed earlier, and she got the plant growing in a pot - it is not going to survive in ohio weather, she did it anyway... now it is my responsibility to keep it alive - big challenge!
it's because of the way our backend works
yeah, raspberries, blueberries and strawberries we grow them..
The pain is real
Wife planted avocado seeds a few years ago, it's 2m by now
wow! avacados are big business here in the US - great marketing!!!
The drug cartel is going after avacados because that's where big money is now...
I see
From an internal team chat: "Stepping away for a bit, mother in law gassed the house by frying some crazy hot chilies and now itโs like the whole house was hot by tear gas"
@strange vapor lol
@last dirge I had to restart my Car to get the software updates... the damn thing says not connected to your WiFi. It is now downloading the update
anyone familiar with shell scripts mind taking a look at this script i wrote? https://paste.ubuntu.com/p/tTcfxx5YCx/
i run it when i want to update my home assistant installation. prompts me to select the latest stable, beta, or dev build. i feel like it could be shortened a bit but i'm not familiar enough to know
shell script ๐คข why not write a python program and run it at startup? much more powerful!
or at least make it a click app
What's wrong with perl?
You can re-write that in 50 characters or less, as long as you never need to read it again...
wanted to learn something new but yeah making a python program is a good idea
You could shorten that, but ... given the short length, I don't see the point personally
It lends itself to some use of functions, since you're doing the same thing with stable/beta/dev
LISP doen't get enough love
Poor assembler doesn't agree with you
I learned one of them for giggles, developed a thing, and then never touched that version again
Indeed, after that I never touched assembly again
does anyone else have problems with github today
Anyone elses HA just crash?
mine just went down, and cant get it up.
never done this before
cant connect to loca IP or duck DNS.
but can connect to pie via ssh and samba
i hate when it goes down and you can't get it back up.
Ask on one of the installation channels depending on the way you installed
sounds like supervised
its been running for 8months +
I hope you have backups ๐
just did one yesterday
retrieve that first with samba, then check the log file and see what's going on and continue on #330944238910963714 (if you just have home assistant on a Rpi)
We are 3 people that cant get our HA to start up again ๐ฆ
logs should tell you why it doesn't start if you can access them
Welcome to Home Assistant's home for real-time and historical data on system performance.
I just updated and went fine - and I'm supervised-masterrace
so no internet = no home assistant
@elder sable no
GitHub is acting up
version check crashing HA?
GitHub Git Operations: partial outage
GitHub Issues, PRs, Dashboard, Projects: major outage
Welcome to Home Assistant's home for real-time and historical data on system performance.
Does not affect me at all
yeah, it "shouldnt" affect something running local
running my OS updates and punting the Pi to see if that helps
Mine is down - if its due to github, not sure ๐
do OS updates guys
#672217570283094017 master race 
sudo apt -y update && sudo apt -y upgrade for the win
back up again - powertoggle raspberry pi . What a strange error ๐
no, tried that first lol
That makes no sense @glacial stag
dunno, mine took a docker update though
@glacial stag i did the power toggle
power toggle didn't fix it for me
doing update and upgrade now
worked for @upper apex
Probably a power cycle at the right moment would have sufficed for all
Probably some part of your installation is common, and had issues
Log files would have revealed it
Yeah you know how those "carefully timed power cycles" can work.
poking log files for borked codez

see that's more subtle....

lol
๐ฉ
Purchased a Frunious 5kw Inverter , let the Solar conversion begin ๐
Pi2 shouldn't be used at all
I agree lol
i had a pi2 once
besides slow load up it works fine
donated it to a science museum for my kids to enjoy one day
Not recommended, never will be, your milage will vary
@rare condor you doing yourself?
@last plaza Some of it I have a limited electrical license so I need some parts to be done by full license
Just running Modbus Energy Meters today
Cost $250 ๐
Aliexpress option was $20
but you know inspector wouldn't appreciate my frugalness or the value of aliexpress
@hushed basalt Simens Logo with ABB 1351 and Frunious Smart Meter 63A RS485 (Single Phase)
yes i should be in bed
My friend wants solar but he has 3 phase
u too
So metering will be expensive
so?
Too much caffeine
WA
Like Vic has $1888 rebate, plus energy grant, plus STCs which make a 3kw system free for budget, I am paying $3000 all up for 6.6kw system and highest end everything
Not sure on our rebates
I don't own a house so I haven't bothered looking :D
My power bill is ridiculous, but the house I'll buy won't be such an energy pig as this one
44 panels, 11kwh, $13k to install here
Hm.. with GitHub down, restarting HA (with hacs) is not a good idea.
@hushed basalt you mean 0.005 per kwh yes 
Is solar even economical for you :D
And environmental
You're already on a hydro grid
this is funny! https://www.youtube.com/watch?v=m5R0UHGh8vA
Hitler has Coronavirus and he is not a happy Nazi camper. He is MAD!
Hitler has Covid 19
Hitler has Coronavirus
https://youtu.be/m5R0UHGh8vA
Hitler Hates Amazon Prime
https://youtu.be/k_EqJz0djAw
Hitler Hates Tiger King
https://youtu.be/nUlQ9fNFA0U
Hitler Hates Cupcakes
...
im running solar on 3 phase. no problems with that
It took me under 10 minutes from "I wonder if face detection would work (offline?)" to "My Chatbot greets me when I enter the living room"... You got to freaking love this project
@late gate is it one gigantic inverter or one per phase?
not really gigantic. got two 6kw 3 phase inverters. they are the size of a midi-tower
but if I would redo it, I would chose 3x 1 phase inverters
I guess since it's 3 phase the amperage doesn't have to be high
32 aps pr inverter
amps
230v
but its IT grid here, not TN
with TN its lots of more 3 phase options
In large buildings and running specific appliances, but general use not really
yeah. well how it works here you have 3 phases into the house, then distributed one phase fuses
so they divide over the 3 phases
Interesting we do the same but generally only for large buildings and phase is split between houses
from line
So I can get 3 phase installed by my power company for $1000, but really only done when you are using more than 63A
230-250
About to start work on a new condo. I have invested heavily in wifi bulbs in the past. The problem is I cannot control them when hass goes down. Any advice on how to solve this issue?
currently i have sonoff switches with the relay on to provide constant power and the touch set to toggle the light via hass
but 1. i dont like touch switches, and 2, it stops working when hass goes down
Get smart switches that have physical controls but that can still be controlled by home assistant (such as a TP-link switch/dimmer) and use dumb bulbs with that
That's one solution
id like to reuse my wifi bulbs as they are rgbw
xiaomi slisaon is cool, it should become a standard
You've got two choices:
- Smart bulbs and your current problem
- Smart switches and no problem ๐
fine, i will design my own smart bulb and smart switch then. if it loses connection to the server, it falls back to dumb bulbs and switches
This is one time where Z-Wave and Zigbee 3.0 (and bits of the Zigbee 1.2 ecosystem) shine
You can have association/binding and allow things to control other things
I've got a
you can borrow
Sunk cost fallacy
Yup
and a smart bulb is only smart until someone turns off the power
But...a dumb bulb won't work without power either lol
But a person won't operate with power either, at least not any more
Ain't that the truth
If the person is not smart, a smart switch can still be a switch ๐
๐
lol I can't tell how many times folks come here and want to put a smart switch to a smart bulb ๐คฆโโ๏ธ
Smart + Smart = 
lol
the new innovelli zwave switches work ok for smart switch on smart bulb
assuming its zwave smart bulb and you can do a direct association, or your hub stays online
my daughter has recently found the physical on/off switch on the base of the lamp in her bedroom that I have a hue bulb in. she likes to flip that switch to turn it off and then starts crying because her remote or wall-tablet doesn't turn it on anymore ๐
hehe, im going to have one of those soon
haha awesome
@amber bramble Try removing the daughter and adding it back in again
Could solve the issue
Sometimes the config flow hangs
Blame ludeeus
Wet shrimp burrito ๐
I want one
you would
you wouldn't evven eat red robin fries.. why would you want a wet burrito?
oh nm you want the beef tongue lol
Wet burrito ๐
thta looks bomb, what spot is that @tidal bronze ?
we normally hit up Las Fuentes....that was when we were still eating out lol
Things you find in manuals... Aeotech Warranty section in their recessed door sensor...
Excluded from the warranty are problems
due to accidents, acts of God, civil or military
authority, civil disturbance, war, strikes, fires,
other catastrophes, misuse, misapplication,
storage damage, negligence, electrical power
problems, or modification to the Products or its
components.
WAR?
REally!? hahahaha.
@tribal whale like the iTunes EULA?
You also agree that you will not use these products for any purposes prohibited by United States law, including, without limitation, the development, design, manufacture, or production of nuclear, missile, or chemical or biological weapons.
Eh their kinda screwed there. government loves iPhone and through it bound to iTunes.
Nobody working in rocket science is allowed to use an iPhone ๐ค
@clear ferry https://www.youtube.com/watch?v=azjqiDox7jw
If you haven't watched South Park, you don't even want to know what they are going to do them for agreeing to the terms ๐
I've watched all 
I watch Adult cartoons before I go to bed every night literally... South Park, Family Guy, Bobs Burgers, Rick & Morty.... so many of them!
hello everyone
Me and the wife watch dark comedies and British game shows in the evening, then we watch adult cartoons or anime in bed @last plaza 
@last plaza add Harley Quinn to that list
its an amazing adult cartoon lol
theres new one from the Rick and Morty guys starting soon too....Solar Opposites on Hulu
Final space was pretty good
hmm never heard of that one
Duncanville is good too
never heard of that one either lol
my wife and i started a simpsons rewatch a few months ago
we are in season 10 now....im surprised at how many of these i remember so far
like 90% or more lol
Nobody working in rocket science is allowed to use an iPhone ๐ค
@clever mortar no one with an IQ capable of working in rocket science would want an IPhone.
@shy comet Harley Quinn? Need to look into that one.
@last plaza its so damn funny......they just finished season one in like december....season 2 is out now....so less than 6 months to push season 2 sounds like it did pretty good to me
I got all seasons of all my fav cartoon comedies. Wife calls it addiction ๐
Awesome! Will add that to my list and prioritize #1
@shy comet you mentioned las Fuentes now I am dreaming of cut up steak tacos ๐
alright gonna checkout duncanville and final space in a bit
thanks for the recommendation @clear ferry
@clear ferry Taskmaster?
Me and the wife watch dark comedies and British game shows in the evening, then we watch adult cartoons or anime in bed :blobsweat:
@clear ferry actual footage of atx in the evenings. https://youtu.be/1aj70Ob0O4Y
Popcorn scenes from Arachnophobia (1990)
@clever mortar @last dirge @wet pilot @last plaza
So I think I figured out my smart switch + smart bulb conundrum:
Smart switch with ESPHome: Relay set to always closed, button press makes a toggle request to HASS.
- In case of infra problems (checked via binary_sensor.status) failover to relay controlled via button like a dumb switch.
Smart light always on when switch is connected to HASS. - In case of powerloss (eg. simulated when switch loses connection) set to always turn on after power return.
@last dirge never seen, 8 out of 10 cats, 8 out of 10 cats does countdown, qi, the big fat quiz, richard Osmond's house of games, duck echos quack,Dara o brian goes 8 bit, mock of the week, tenable, pointless and a ton of cooking shows
@last plaza should just text dump my Plex server then 
@clear ferry love that idea ๐
After being on hold for 30 minutes:
"have you installed the Microsoft surface diagnostic tool on your surface? I will not be able to help you troubleshoot until you do so."
No. I'm calling because I can't turn it on.
"Ok. Well, I'm unable to help you until you install it. Please install this program and then call us back."
How can I install it if the computer won't turn on?
"You can call me back after you install it. Have a good evening, sir"
๐
thats why you always say you've done whatever they ask
I should make something like this for my house
Do you think influxbd and grafana would be appropriate
@hushed basalt #diy-archived
I'm not sure if if would come under diy
sure it would
It's not even HA related
diy isn't just ha
@forest edge how are you supposed to say you installed something on a computer that won't turn on? Lol
with a , "yes I have"
then when they move to asking you to run something you THEN say, it won't turn on
Lol
your whole goal is to be bumped in the support tiers when dealing with crap like that
the first tier is always the people who are just reading from a piece of paper of what to say and do, you need someone with a brain
Though there was no higher tier they could bump me to
there is always a higher tier even if they say there isn't one lol
His recommendation was that I bring it to a Microsoft store. Then when I asked which stores were open due to covid, he said none of them.
lol
I'll be sure to ping diy at you next time you talk about making rgb lamps :)
@forest edge he said I'd just have to be without a computer until covid was gone.
Fortunately, its my wife's computer and she can just borrow one of mine
Unfortunately that means she's borrowing one of mine. And she doesn't ever use an electronic device without it breaking
@hushed basalt i was just messing with you btw, I hope you knew that lol
Haha all good.
any idea if it's possible to cast a local audio file to a google mini? looking for a way programmatically
@gentle ferry you may wanna try using the search feature. i am pretty sure that question has come up a few times.
I forgot to plug in the harddrive fan so the Nas drives been at 60c the last year
60C really isn't that hot for most computer hardware
No but a bit toasty
@gentle ferry you need a valid https certificate
Google homes won't pull data off a source that isn't on a valid https source. And I'm pretty sure they use their own dns as well
@gentle ferry , the answer is yes, put the file in /config/www/ and
action:
- service: media_player.volume_set
data:
entity_id: media_player.family_room
volume_level: 0.75
- service: media_player.play_media
data:
entity_id: media_player.family_room
media_content_id: /local/dog.mp3
media_content_type: music
and #voice-assistants-archived , for anything further ๐
Eh, more automations
๐คท๐ผโโ๏ธ. Just not here ๐
@chilly nymph Windows has a rare habit of sleep of death. Damn thing will look dead/off when its locked into a sleep of death. Have you held the power switch for 10 seconds to force it to do a hard power off? the power switch hold is detected by the mainboard and it powers off.
Apply Percussive Maintenance
Hah
Anybody using RainMachine?
@lavish smelt yep
Which one are you using? It looks like the touch ones are out of production or something.
Itโs one of the few supported controllers thatโs local control. Rachio looks like the other big controller but itโs all cloud connected.
@hushed basalt you can use a local http source
Yes but it needs to be https
@lavish smelt pro
it can be http. i cast this each night from home assistant: http://10.0.0.2:8123/local/audio/white_noise.mp3 @hushed basalt
@tidal bronze any issues with it?
No been using it for few years. One feature I am missing from skydrop is a notification before a program starts.
@scenic radish each night? https://images2.static-bluray.com/reviews/10670_4.jpg
lol polka
I was waiting for a "the link doesn't work for me" joke when I posted the URL above
worked for me
any help? I'm moving my install to a new server. trying to get the mqtt integrations transferred over. any thoughts?
(is there a specific file that contains the integration entites?)
Just transfer the config folder over @rose crystal
@scenic radish is there a less.. nuclear option?
I'm trying to do it a little at a time to figure out if there's an error with my old config
(thanks for the reply)
There's no clean lines like that
Copying the whole folder is the easiest and safest way
also the easiest way to copy my errors ๐
i get it though.. just too bad because i've already reconfigured most of it
Learning to fix things without a clean slate is harder but it's an important skill to have :D
I recommend becoming familiar with the configuration validator and looking at the error logs
nub error on my part messing with an automation last night left my outside lights to go on and off over and over for ovver an hour before I caught it tonight lol
neighbors and those who drove by prob thought the kids was messing with the switch
haha
@hushed basalt copying the dir over worked, but now i have to make my config file pretty again ๐
thanks
Look into splitting up your config
I use folders for each section and subfolders in that. But start small and simple.
yeah that's what i had just done. it shouldn't be hard to re-do that
it was marvelous
๐
heading off to bed. thanks again guys
I'm looking for someone to hire but helping me setup the homeassistant
Is here anyone who could help me with it?
deez probably could
heh
Lol I see that
Bofa is another good one. "I saw Bofa at the gym today, she asked how you're doing"
so looks like my rescheduled trip is likely going to get screwed up by another wave of covid problems
yay
our governor announced opening of restaurants for dine-in service, gyms, hair salons, massage parlors, and bowling alleys starting this Friday
3 week incubation time puts the next spike at the end of May
probably be locked down again mid June
he's not following the guidelines of the CDC or the plan laid out by the federal government
it's going to be a big problem
pretty sure this whole lock down thing was just to slow the roll of the initial surge and everything beyond this is just gonna be a ride it out. so unless the hospitals start overflowing with sick and dead there is no way anyone would institute a second lockdown
That is a horrible idea, what is your governor thinking...
is he just making the motion or is he planning on giving out money?

Probably one of my favourite metal albums ever, the mix is very good
Ugh
Oh, your password reset tokens time out? That's fair enough. But just maybe the timeout should be longer than the interval of your email processing batch job?
"Your password did not save" Ummm... ok... why?
What the heck is with this company?
Well... despite them leaving full logging on in production code, I can't figure out the problem... Kind of wish they had a support link...
@clear ferry made you a new covid sick emoji lol
I am going to install some solar panels but I am figuring out placement, I want to see if my neighbours house blocks light a lot when the sun is setting. So I have planned to chuck some ESP8266's on my roof with these sensors: BH1750. (4 of them and record the output to influxdb over 1 week). Is this a dumb idea?
I was going to install them on top of my garage and some on my roof
you could just take a reading at high peek and again at sunset and average them out
I'd go for just after sunrise, midday, just before sunset
@rare condor installers might give you a better idea
They should have software to map all that for different times of the year
Also which way is north in that photo
@hushed basalt they do, what they don't have an idea of is whether the neighbours property will affect the shade
Direction of Camera is north
so that photo is facing north
unless those neighbors are on a hill higher than your house I doubt they will effect much
I would put them all on the roof if you can
@forest edge we are single unit they are 2.5 stories
That house to the west will shade that car port
for context
This is planned panel placement
But Eastly facing means reduction in output for 8 panels
thus it makes more sense to install on garage if possible
Those will get shaded like hell
I'd put the leftovers on the east and try to distribute your loads to use more in the morning
Plus the better angle
You won't need tilts
I would find out when the shading starts and for how long it lasts till sun actualy sets before deciding placement
That's why I was going to put sensors on roof and garage
depends if using microinverters or not
you don't need to monitor for a week, you just need to take readings at critical times
@hushed basalt Sure but see the car port only half gets shaded so If I installed 6 panels they may work out better
I can't tell without real data
It's a flat roof too so the mounting hardware will be more expensive
I think even south is only 25% drop
Because the evap cooler and slope of east will shade too
@hushed basalt nah cheaper because its tin, its faster for them to install so worked out similar as labour is biggest cost
Yeah well I will measure tomorrow and see real world outputs
Its a logical choice right, to measure the output?
make sure shaded panels have their own string, or use micro converters, otherwise the whole setup is affected
micro inverters have the downside to be on back of panel, and get hot, so their life is not great
@earnest glen I have choice of either micro inverters with 5 less panels or inverter with more panels, I think better choice in my context will be more panels
I will find out once I measure the Sunlight output

inverters with more than 1 string support are expensive, but could still be right choice
@rare condor I have 7 panels, wanted 10 (3 more in top row) but installed recommend not because wind under panels
Had them installed in 2013, so investment is repaid already, inverter (Omnik) was replaced under warranty 2 years ago
The 10k install will only cost be $3000 as its subsidised by government
I will have two strings
One East if installed there and one North facing
In my neighborhood a lot of installations are installed wrongly (behind trees, wrong angle etc...) too bad
This is posted on one of the solar installers websites:
It's like they tried to find the least effective spot
@rare condor, thats what i mean, money in the pocket and go, customer doesn't monitor returns
also, if you do micro inverters you don't even have the option for battery backup
I want to get some solar panels but subsidies in my area are basically non-existent now
and my roof is east/west facing so they'd only get direct sunlight half the day
Wonder how well solar panels are with midnight sun
i imagine the sun is pretty low on the horizon during this time?
pew pew
It is above the horizon, but the level varies on location and date @sour escarp
ah ok
The midnight sun is a natural phenomenon occurring in summer months at latitudes north and nearby to the south of the Arctic Circle, and south and nearby to the north of the Antarctic Circle where the sun remains visible at the local midnight. Given fair weather, the sun is vi...
Hey does anyone use Simplisafe HA integration?
naaah... i have a DSC panel with an Envisalink and use the Envisalink integration ๐
Hmm I am looking at changing out my alarm service and was hoping to get some feedback on what people think.
we used to use simplisafe at my old office but haven't used any of their new stuff but maybe someone here does
Who does your monitoring service/
@clear ferry I know a guy that's a geologist for a mining company and he spends like 4 months out of the year in extreme northern parts of the NA landmass
he said it's really hard to get used to the sun rising one day and then just circling overhead
imagine living in the north pole where it stays in full sunlight all day long throughout the entire summer.
music by - Avi Hochberg - guitar105
Vampire proof
for half the year at least
๐ง
@clear ferry speaking of vampires, watch What we do in Shadows.
both the movie and the tv show
I do already
Need to watch the movie though
But speaking of waititi
JoJo rabbit was good
Yup. Every one enjoyed JJR at home.
One of my favorite things. Especially if you don't have chipotles on hand
Want
headslap that'll do it... tryin to figure out why my zwave lock wasn't working or responding... I forgot to add a network key for secure mode.. my out of date backup didn't have it in config..
๐คฃ
ahh well. wasn't hard.. just hey wait.. I wonder if... SOB!
it only goes in config yaml, can't go anywhere else right?
Well, depends on if you're defining manually or in the UI ๐
It'll get imported into storage AFAIK, but #zwave-archived would be able to confirm
Is there any good ways to grow a zigbee mesh and keep the mains hidden. I feel like everything is a wall wart. All the in-wall switches/oulets seem to be zwave.
#zigbee-archived would know ๐
I hadn't seen a way to define the zwave security key in the UI.
Have to look into that.
on initial creation its one of the available fields
Ahh, since its specced in my config yaml that doesn't happen.
yep, that is one of the integrations that is configured to consume its settings from either location
after it pulls it in where does it store it under .storage. Want to ensure its not already in there from earlier and me having cleared it out of the config yaml after a boot up.
It'd likely be core.config_entries
Can anybody tell my why I bought this stupid aqara cube... This is the most useless and confusing controller ever. Let's get this into ha
@tidal bronze https://www.reddit.com/r/homeassistant/comments/g664w4/multiroom_audio_visualization_using_ws2813s_ledfx/ LEDfx running from a laptop....sounds like a smart move cuz it has builtin mic....why didnt i think of that before LOL
@leaden adder Drzzz already has look it up on youtube
@shy comet you really want your whole house to light up like the ship from Close Encounters of the third kind?
Close Encounters of the Third Kind movie clips: http://j.mp/1JboAnh
BUY THE MOVIE: http://amzn.to/vv20vP
Don't miss the HOTTEST NEW TRAILERS: http://bit.ly/1u2y6pr
CLIP DESCRIPTION:
Scientists try to communicate with the Mothership using light and musical tones.
FILM DESCRIP...
@leaden adder the xiaomi aqara cubes are the cutest things ever. I got a bunch, and most used smart toys at home.
@last plaza I just fell in love with it
we should add that as an emote here just for @clear ferry
lol
@clear ferry zigbee2mqtt because of the distance?
When not if. ๐
just call that one :atxbyea:

lmao
@forest edge i want my house to feel like a night club when its dark
Donโt you have kids? @shy comet
hes almost a year old
@shy comet wouldn't leaving beer bottles everywhere along with trash and the overwhelming stinch of sweat and sex be cheaper?
lol i need pretty lights ๐
@shy comet I got 2 Yeelights in my living room, one in the kitchen and one in the bathroom, synced music mode is awesome ๐
It used to be fun with color changing lights, but not anymore. We just use the day light white color mostly.
I'd kill myself trying to find my way around the house with the lights swapping colors at night lol
i normally do solid colors
but im all down for party tricks when we are allowed to have friends over again
lol
but im all down for party tricks when we are allowed to have friends over again
@shy comet that would be in the next few years.
No parties until there is a vaccination
Ohio predicted 100K coronavirus cases with 10K deaths. We have 14.117 so far with 610 deaths. Crazy!!!
well they call them covid parties pre-vac lol
lol
er corona parties, whichever
When I tell Alexa to turn on "epilepsy test" it activates the "strobe color" effect in living room, kitchen and bathroom. It's always an.. experience
that's one way to get your mate out of the mood lol
lmao
Apparently I choosed strobe white ๐ฆ
It took a while for alexa to understand what you said it seems ๐คฃ
Yes, I mumble a lot. Poor thing
I would do that effect in case or burglary- someone come inside when security system is armed.
News break: Smart Home kills Burglar with light effects
in @steel urchin case it's landing light effect showing them to the way to the safe lol
say what?
lol nothing just remember your hallway effect showing the way to the door
hello everyone
See, anybody that says the Scots are easy to understand, all they have to do is go visit any city centre on a Friday night ... well, maybe not right now
@shy comet what are you doing? spamming? ๐
2h ago
lol. You must be really fast at typing ๐
I tried to post like 10 messages to test the theory in #botspam earlier. Discord will stop you and tell you with a funny message.
I think mods are safeguarded
lol. Looks like it. I just spammed it! Will go back later and clean it ๐
id imagine if my accoutn got hacked i wouldve posted in more than 1 room and 1 server LOL
i got 2fa on as well
2FA is good
Someone should seriously put 2FA for mass emails at work. ReplyAll should ask for OTP code
That would be awsome
Node red down?
Hmm appears to be a known issue
The guy stated that weeks later his SD card died, but I can't see how these 2 events are related
But w/e restarting worked
i don't have any hallway effect
@steel urchin how do you not remember asking how to make your hallway lights turn off an on in sequence when someone rings the doorbell? that was most certainly you lol
errr i had mentioned wanting something like that, but never asked... i don't have individually addressable bulbs to do a strobe effect
people try and challenge my memory.. pssh
but i still don't have a hallway effect ๐ฆ
you have like 5 or 6 lights in that hallway if i remember right
didn't you put everything on smart switches?
Anyone ever bought bequiet pc cases
Or coolers
I'm thinking of this
Should be a bit smaller than my midtower at the moment which has enough room for 8 x 3.5", 2 x 5.25" and 1 x floppy
I'll probably upgrade to nvme when I transplant everything and have zero sata power or data cables to worry about
I just use a cardboard box and cutout whatever holes needed
it's only 3 lights in the hallway, but yeah on a dual pole smart switch
well i think after 7 years i might have to put the netgear to rest... i think the radios are starting to fail... too jittery :S Now I need to find a router that is robust enough to do my liking, or one that will take Tomato firmware again and I can continue on with my merry day
What's going on in the loouuunnggeee.
what do you mean separate ap's?
yes i was using my netgear as my AP, the Arris BGW210 is 100% garbage
but right now i have to use the modem's bs stuff
I'd go some unifi
Get yourself an Asus ac-68 on eBay, load dd-wrt, and rock on.
nah only good up to 30ish clients
I only use WiFi as a last resort.....as such, with 3 of them in my home.....90 clients? But why?
https://media.tenor.com/images/74eae4ff92a933aaecf5b968aed5818d/tenor.gif
same here ....but i still run between 50-60 wifi clients but i have 3 ap's
Gahh
My vdsl modem just died
If I wasn't renting I would strictly use APs for mobiles and tablets and esp stuff
Desktops, tvs, cameras etc should always be ethernet
I guess I try and stick to the $100-$150 AUD mark for APs
Any more than that isn't worth it for home for me
It pays to get something decent
Unifi AC lites are pretty decent
$320 each. Nah :โฌ
Ubiquiti UniFi nanoHD Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point ( UAP-NANOHD-US) https://www.amazon.com/dp/B07DWW3P6K/ref=cm_sw_r_cp_api_i_EwqOEbK2G70KF
@hushed basalt where in hell do you live?
$158 each
Australia
No wonder
you don't need Ubiquiti for something that lasts. you just need to be smarter than the average Tediore
Yeah 1k for 3 APs is too much
Nothing lasts. @forest edge
Unifi is good but obviously there are minor quirks as with everything.
well by lasts you mean over 100 years.. sure
Hmm 18 months to 2 years.
I'm still using a linksys that is like 15 years old lol
thats not evven the wrt i havve in thd closet that still works, i don't use it cause it's not gogabit lol
*gigabit
I ebay anything that's 2 years and upgrade. Pointless trying to prove a point that shit lasts when you are left with a piece of plastic.
well it's one of those set and forget type of things
Never.
for me it is lol
plug it in walk away and blow the dust off it decades later to make sure the leds still blink lol
Weird when it comes to electronics but I guess ok. ?!
this whole concept of having to fiddle with everything every few days is a realitive new concept
i come from a time where things just work
well not my sound bar, it died
LMAO asked and answered I guess. I will leave it at that.
it's like choosing between a T800 terminator and a T-3000. sure the T-3000 has many bells and whistles like the ability to transform etc but only the T-800 has managed to livve to old age
I can't complain, I can freely upgrade since I am petty sure the Sonomas buy my old stuff on ebay. ๐คฃ
I probably would if I bought stuff off ebay that much lol
most my ebay purchases are weed eater carb parts ๐ฆ
Lol.
what I don't like about battery stuff is 1. they always make the batteries and charger proprietary so you end up with a butt tons of diffrent crap and 2. the batteries always tend to go bad at the worst time
the trimmer came with a 5Ah battery
the backpack blower came with a 7.5Ah battery
like 4 pounds
we bought some of those worx things like the small leaf blower and another that is a leaf mulcher and string trimmer, all 3 take diffrent batteries lol
HV is the key.
blower performance is inline with a Stihl commercial backpack blower
but no dealing with mixed gas and shitty carb issues
carbs aren't too much, just can't let it sit for like 2 years without firing it up or you end up havving to rebuild it cause it dries out lol
glad this year i don't need to mess with any of that cause all the carb kits come from china and i'm sure that would be a super headache at this point lol
I had to rip apart the carb on my honda rotary mower to pick up the crap after I dethatched
well some carbs are just junk
I hadn't run it in over a year
but I left the tank full with seafoam and Sta-bil in it
still was all varnished
damn ethanol
downside to two stroke
and that
ethonal is the reason it does it lol
no escaping that
unless you use trufuel or whatever that crap is
use non-ethanol gas
i'd rather go out and fire the thing up once every 12 month then to spend what they want for that crap
the only non-ethanol you can get here is those little cans of like tru-fuel or whatever. it's like 12 bucks for enough to fill a single weedeater tank once
seafoam helps
lol
@tidal bronze you should list your ebay listings, you never know you might have something I may want lol
Lol. Did a full load few months ago.
@tidal bronze 56V is 14s?
Yes/No
depends on cell voltage, I'd guess
is LiFePo4 stuff good outside of deep cycle storage?
Better drain curve but less C than lipo
so draft horse vs quarter horse
Yep
Also less combustible ๐คฃ
newer chemistries seem a lot more stable than older ones
a LOT less heavy metals in the stuff in the past year
it's kinda crazy how fast that technology advanced after being stagnant for so long
๐
they went completely around my neighbor's house
circled it
then came back into my yard and burrowed in my flowerbeds
now they're back out into my turf
get one of those winnie dogs
my neighbor has a Yorkie
neighbor had two fo them, she never had moles lol
who apparently can't catch shit
or sherbs or whatever those smaller things are
wonder if Ludeeus is running some kind of data analyses with hacs to know which integrations/cards/themes are being installed/used the most


@clear ferry boy everyday when i wake up you are here
this is his home
discord automated everything for him
Yeah, but not the ๐คข responses... not sure why ๐ค
Regarding NEST; did you guys know that the @googlenest twitteraccount actually actively refers to badnest whenever you ask them about API access? ๐
@clever mortar didnt work ๐ฆ
Clearly the wrong incantation to summon the Deep Ones
๐คข
beard too big to make the reaction understandable lol
Teams remains "less than stable" - I think the sudden uptake hasn't been fully accounted for
Schools here are using it, and it's normal for people to take 10 minutes to get a PDF because of random backend failures
Oh nope
i don't have that
images have become randomly
Sometimes they show
sometimes they dont
Yup, that's Teams
I think they've forgotten to enable the auto-scaling feature ๐
Was mentioning here that my original Logitech QL570 was still going strong... This morning the microswitch on the left button decided to go dodgy
not sure if it's sracasm or not
It can be both true and sarcastic...
@clear ferry Teams doesn't support FF, so it gets a thumbs down from me :p
Firefox?
Yup.
Vivaldi 4lyfe. Just released a stable Android version too.
as a Norwegian you should be obligated to use it as an expression of national pride, smh
@midnight adder are you from the UK
Looks like a typical english garden
Plus Terriers
terriers?]
The dog
Cross poodle haha
hes cut recently
but yeah t here is a poodle in the mix
as well as a labrador
Evil dogs lol
Pfft haha
relaxed af
Poodles always attack him.
Sunglasses doggo!
๐ถ ๐
@hushed basalt Congrats, its such a nice feeling
I would almost consider using some sfp+ multimode just for the hell of it
But my storage backend doesn't justify it.. for now...
10G has gotten stupidly cheap. I'm in the middle of sorting out a rack here, and I made sure to get a switch with some SFP+ ports so that I can have some fun with 10G further down the line
10g is consumer by now
We are mostly pushing 25 or 100g
200g is coming along
40g is legacy mostly
So I have a password with a | character in it (yeah, I didnโt realize itโs special purpose in YAML). Is there a way I can still use it as part of the password in my Secret.yaml file?
Figured it out. |
\ then |
Standard escaping
Back in the days if you have # in the root password, you are screwed. Early days of Unix
@last plaza just keep it password, noone will try that anyway!
They'll go for complex stuff like Password123!

๐คฃ
Just saw on TV that Cats are infected with Covid-19 now.
As well as being assholes, they're infectious assholes now... ๐ฌ
all our cats are indoor cats ๐
oof... just ran some cat 6 to where i wante dto mount my smart things hub in the ceiling...
then realized theres no damn mounting options...
wtf samsung
Blutak
VHB
I mean, nine inch nails will do the job too
Smart things ๐คข
Also... Hubs in the ceiling wtf
atxbyea whats wrong with smart things, if i dont use smart things? i mean seems like a decent option. wifi or ethernet, zwave and other protocols
may roll with that, but need to see if i have any white filament
3m tape?
maybe, but dont need it getting warm then dropping etc...
The biggest problem with ST is ...
IoT class: Cloud Push
Well, that's the second biggest problem ๐
There's direct #zigbee-archived and #zwave-archived options that avoid the cloud, and if you really want a hub there's other options (though, they may also suck)
yea but i can just use ths local zwave functionality right?
Not with HA
i mean its a zwave hub. i can bypass smart things right?
aw shit
๐
any other decent hubs that arent usb? that can take commands over wifi or ethernet?
Not really
There's vera, but others have said negative things too
Not sure why you're hating USB sticks though ๐คท
running ha in a container in unraid
deCONZ and Zigbee2MQTT both can run remotely, and probably should
The new Z-Wave integration, or Zwave2MQTT, can also run remotely (and also probably should)
I need to set up zwave2mqtt to try it out
Of course, you can pass USB sticks through to containers, unless you've got a really crappy platform ๐
Unraid ๐คข 
At least it's not VBox ๐
VBox ๐คข
Barely 
im liking unraid
Commercial and XFS ๐คข
what about one of them hubitat hubs
Hubs 
seems to be an elitist group here
Atleast a group that knows the errors most users do and try to steer them away from it
we don't know anything and we can prove it
well whats the justification for stick > a remote hub?
Stick is always local @small gulch



