#the-water-cooler
1 messages ยท Page 486 of 1
I have a dead AMD in my drawer from that era - it got "a little" hot
Motherboard was destroyed
Fan on the heatsink melted too
The first mentions for it I can find are for Pentium 4
I had thermal throttling on P3 coppermine
And taulatine
Betted a friend while playing quake 3, I removed my heatsink and played on for 45 minutes and he removed his and the duron snapped in half
@clever mortar do you remember the amd Athlon dual socket boards? They had different voltage CPUs at the time too, a friend put in two different ones, they had to evacuate the classroom
Duron era AMDs didn't have it for sure, but I wasn't sure about P3
@orchid rose don't think AMD had it until 2005/6 atleast
Probably. It was hardly an issue though at the time and has only really become useful lately where the cpus are more optimized based on their internal temperature
There was still emergency shutdown though but there's a little bit of delay with that
95% of cases I saw the CPU was broken
I've never even seen a cpu fan break, let alone have it break a cpu ๐
but I'm sure it happened on occasion and protecting users from fucking up can be useful
Yeah, I hosted 700-1000 participant Lan parties at the time, and has a computer store through school, I saw a lot of messed up stuff
did you remember the note 7
first phone to be banned from airplanes
had intel chip i guess
nah, intel never really made it to the mobile market with their power hungry devices
and it was the battery that blew up on the notes
@clear ferry thats what I miss about working in hw.no / hardware.no - all the fun we did like soo when a CPU will burn live on stream :p
@last plaza jankycam might be a failure
there seems to be an issue with the refresh rate of the display vs the camera's CCD
what are you referring to Brian?
my shitty IP cam I bought to stick my BBQ monitor in front of
@last dirge oh no!!!
There's a couple of issues that could contribute to the problem. Mismatched frame rates and the way digital cameras capture the image which is row by row afaik
You need high frame rate camera?
I don't know
I haven't experimented with rotating it or anything yet
and I haven't played with any camera settings
That is an important piece of information that should be documented on the web site.
"don't point this at the BBQ Guru DigiQ and expect it to work"
They did. The crazy bastard actually did it! https://t.co/pQipsamklq
20426
41113
what exactly is the problem you're having? The numbers wobble on the video?
Great. Longer exposure should work with a display like that
Copyright muuuuurica BBQ corp, no snitching please
yeah, changed the shutter speed
Some people might remember the crazy flicker caused by CRT monitors back in the day when trying to capture on video
I love it, it tells me the footage is genuine and not just rubbish
Hurray!!! Never knew you could change shutter speeds on cc cams.
Even if it's automatic you can sort of do that by putting a dark filter in front of the lens. Less light = longer exposure
I need to figure out the webcam for my wife's dobsonian telescope
I've never tried that. Didn't just work to tape it in there?
I have one that fits in the focuser itself
Just need to understand the software for stacking hundreds of single shots, and learn the barlow stuff and which objects I need it for
RotateCCW(45)
@last dirge how did you change the shutter speed on the camera?
@last dirge yes , but those guys are autists that build their own equitorial mounts and take 400.000 pictures over 40 months 
@hushed basalt I got the shitty camera for the 7-segment component for hass
the camera's actually better than I expected it to be
Norway has had some strange ice-creams over the years
the bottom right looks like a real life lollypop
Most of those exist in the UK too - not that weird
i had these badboys back in the day
you get punished for not eating it fast enough
the one on the top right looks like the Concord
the icecream melts and drips in the bottom part
then the smarties wont come out lol
I'm supposeto be able topress back on config/ in files right
and access all the other files?
Browsing ha config graphically ๐คข
no @late gate I never did.
get yourself a nice treat @slim vortex
@slim vortex so do you 
Am i doing something wrong
or is this as face back in files you can go
I can't go back
Why would you go further back?
trying to reset lovelace
If you don't know nix you shouldn't touch anything higher up than that tbh
My automations no longer show up
But everything is in that folder 
Where could I pay someone to manage my HA
Legit would pay someone to make my automations and make it allwork

Speaking of broken automations, where is king mihaliski 
Does absence mean it is working or abandoned though 
Legit might just completely reset my HA
@slim vortex but was the feed stable or garbage?
I'm disappointed. No Ozzies representing our famous
@late gate it looks good. I did have trouble with it falling off the network a few times. I haven't been using it lately. I've just got a lot of cameras so it's just in the closet.
@young sigil I have lived in Melbourne my whole life yet to have one. ๐คทโโ๏ธ
Anyone tried the Xiaomi Mijia BLE Temperature and Humidity Sensors, I have been using the zigbee ones but I am considering trying these.
Belongs in #hardware-archived probably. I think atxbyea had one of those
@rare condor Likewise but still you had heard of it and they were discussing odd ice creams.
@orchid rose cheers I'll ask there
Get a bigger egg @last dirge lol
@last dirge this early?
Uh hi
@vast dove that's 20 pounds of shoulder
Whats the size of the egg? Medium? Large?
@tidal bronze the food probe was too close to the bone and was reporting the wrong temp so I had to open the lid and move the probe
I took the opportunity to snap a quick picture
@vast dove large
I won't tell you how much I paid for it because it'll make you angry ๐
this was practically free
have a neighbor who picked up one that "fell off a truck" from a budy
apparently only paid 300 for it
some guy's wife made him get rid of it
lol wow
@wet pilot that's a lot ๐
https://bakerenogkokken.no/griller/kullgriller/big-green-egg-kullgrill-large-komplett-pakke/ 2013USD i Norway, crazy prices ๐ฎ
there's no way it's breaking through the stall this fast, might have to move the probe again
Me right now: https://www.youtube.com/watch?v=ST3yf-H51Hg&feature=youtu.be&t=14 14-28 seconds
Finally! Heat treating at home! Making some parallels and vise jaws. This is not a sponsored video but I couldn't be happier with the new oven.
EDIT: covers machining, heat treating, and final grinding to size.
Check out Stan's channel here: https://www.youtube.com/user/...
@shy comet are you using tinycam with shield?
Better than ADB on shield?
Anybody else get this message in their logs? Log Details (WARNING)
Logger: homeassistant.components.http.ban
Source: components/http/ban.py:74
Integration: http (documentation, issues)
First occurred: April 5, 2020, 7:50:18 PM (6 occurrences)
Last logged: 8:03:48 AM
Login attempt or request with invalid authentication from 172.30.32.2
Good Morning, I have Hassio.tv domain name. It will be expiring soon. Curious if anyone here wants it?
#integrations-archived @shell pilot
Really?
$0.02 for the domain?
@low harness get out of my head
I just watched that video
@shell pilot only when I screw up and use the wrong credentials
that looks like a public IP though, so someone's trying to get in
It's more likely that it's Google's algorithm in both of your heads ๐
or that we both subscribe to ToT's antics
I'll let the folks that actually run things know
@tidal bronze didnt know you can use ADB....not sure if you can do all the things you can do with Tasker integration though....one thing I do is start a video in floating window so it shows up over any app even videos
ADB meaning Android Debug Bridge?
@shy comet Copy. As always I want the quickest way lol. Now my motto: less time tinkering, more time enjoying ๐
@last dirge yup
@tidal bronze yea for sure....it took like 10 min to get things setup properly since it was a lot involved but once setup it works great
we use it to display the baby monitor on the TV lol
I have the snapshots on all the shield units already running just need the front door live stream temporary. Now I am not that fond of live streams ๐
But baby monitor makes perfect sense
yea i want to send snapshots from the front door but need a new camera
I submitted a PR to Ring to get the snapshot to work but hasnt been merged yet
How on earth did this tiger get infected with COVID-19?
they say from his caretaker
shit like that is hard to prevent cuz they are still essential to the zoo
love that app
Yep that's my fav app for years. But I don't use it that much
i love that it supports PiP on teh phone too
I have that exact Foscam PT camera in their main image
pIp and the floaters rock ๐
How on earth did this tiger get infected with COVID-19?
@tidal bronze well you see when a mommy tiger and a daddy tiger...
on the shield always use the floating image
PiP will get killed the moment any video starts
i have a harmony keyboard so i use that to adjust the window size and location
you get more freedom in floating window
and it remember the settings for each camera separately
cant believe he was able to add Arlo support on it
@shy comet = = nvidia shield ninja ๐
haha i use it every day
Gotta setup the pro today in the bath
Might be able to score another pro CL today ๐
you got a 2019 one?
Yes.
nice!
Already had pro but at $160 ~180 going to snatch a few more on CL
nice lol
2019 offers Atmos on netlfix....older models can get it via the Kodi add on
2019 also has some AI upscaling feature
IMO it missed out on not having HDMI 2.1
that remote looks far less shitty than the previous one that always gets lost in the couch
Never use the remote. Harmony here
harmony is way overpriced
i max out the hubs on remotes lol
I don't have that much gear
depends on the models i think
$50 for harmony hub is a good price to control everything
and I've got a GlobalCache IP2IR in my cabinet
i was able to snag the harmony keyboard for $25 on ebay lol
but the concept of not having to point your remote is what i love the most
that and being able to control what button does what on the remote
makes life for the wife easier
I like the IR over BT with harmony.
@last dirge Iโm not sure if Hikvision cameras support shutter speed. Thatโs a cool feature to have for sure!
The Nvidia shield is really a us product, I have never heard of anyone outside the us who has one @shy comet
I paid 30โฌ for a harmony remote (650). It's starting to die though ๐ฆ
They sell them here, but they are expensive
@shy comet I use this for shield in the rack with harmony
I had a harmony 300 once, only harmony I ever owned
yea mine is out in the open so the hub can reach it...i only use USB for the xbox so the keyboard can work
That had pretty limited macros (activities) iirc. At least it looked like it wouldn't be enough for my use when I was looking for a replacement one for the current one
@shy comet IR is much faster response
It's amazing that lirc is still a thing.
It's not that long ago that I stopped using a COM connected remote on my PC ๐
I mean, It was like this dude in the -90s who went "Hey, what If I wired an IR diode into my computer randomly"
ye, but it just works
sometimes the most simple basic things turn out to be the best
well sort of, it had to move to usb
Sure, but you bet there's just an ftdi in there.
I don't know actually, it didn't work through a com-to-usb adapter
IR goes well with watching TV. No matter what fancy app etc just not that practical.
I had to buy a motherboard with a dedicated com connector on it to keep my winlirc working. iirc it used some trickery which made it not to work with a com-to-usb
I think BT makes a better pair for tv than IR imo
RF is fine, but BT allows so much more
but IR works just as fine and you'll always have to see the thing anyway
BT is OK for the average user. Not if you want to customize commands delays etc.
well it's doable
how?
Not using the same remote for something else. I am referring to customizing the activity.
not sure what that means. you assign the buttosn to whatever you want rather it be to replace an IR command or RF etc
Exactly, as I mentioned earlier, great for the average user. ๐
lol not sure what fancy crap you are doing
the remote wouldn't dance and do the jig
you want something thats more pc than remote i think
Example. Say you want to trim your subwoofer levels, adjust your dialog height, change DSP delays..... NO BT remote is going to be able to do that.
if the reciever allows BT connection to do it, the PS3 BT remote could do it
you must be comparing a harmoney that when you press a button it sends 40 million commands to accomplish what you want
no a BT remote cannot do that UNLESS the recieving end allows it
You are talking about la-la-land ๐
I can quick adjust the speaker levels on my onkyo via ir, without going into menus 
Yep
macros are great but in theory you can do that on BT as well. However with a standard such as IR I really don't see the upsides of bt that would make anyone go towards those
I guess so, maybe your tv is more complex than the avverage bear lol
TV's are elementary
it's what we're talking about
Some of us use the TV as nothing but a display
everything goes through other devices and connected to an AVR
as i said, if the receiver supports it
Who controls a TV anyway other than on and off ?
most people
oh
they don't know any better
yea not all of us a scrooge mcduck money vault to swim in
my home theater system costs less than a TV ๐ฆ
it's not really a money issue, it's more about what you enjoy. I like tinkering with stuff like that while others just want to watch tv
I have a very budget setup
Onkyo tx-nr656 + dynavoice magic f6 5.1 set where I replaced the center with the Challenger c6 and a lg 65 2017 model
damnit now I miss that PS3 BT remote. thing was awesome
I have a Yamaha receiver upstairs with some hand made murica speakers
Don't remember the name anymore
@tidal bronze you are the person I know besides myself that even knows what trim and lift means
As a purist I scoff at any of these adjustments
So no volume either ๐คฃ
permanently set at -0dB ofc for the authentic experience
MRW government leaders ask us to "pray the virus away" - https://i.imgur.com/I2izZ7L.gifv
neighbors love it
I live in an apartment so yeah. Probably more like -30dB max
Otherwise I try to keep it as close to reference as possible with speaker levels and such, and most definitely no dsp ๐
I donโt with music but tv sound sure
You can make an argument for that but as they come from the same source for me (Kodi) it's just too much work to figure how to get it to work properly. I'd have to change the output setting to stereo for TV content so it doesn't think it's 7.1 to even access something like prologic II or dts:x
10-4 most of my music plays from amazon thru diff source or if I want serious Mqa or my recent discovery of dsd format itโs different sources
I could probably get something done by running automations with HA, but it's just not worth the effort as the only TV I watch is football (soccer) and I don't really care if the commentary comes from the center speaker or the front speakers
In order to get rid of my hand/wrist issues i started using my left hand for PC
i feel like a old person trying to get along with a pc
In order to get rid of my hand/wrist issues i started using my left hand for PC
@fading zodiac oh the comments that could be made..
BoJo taken to ICU btw
I am looking into that vertical thing of MX
Just wanted to spice things up
Would that Vertical thing work?
De Logitech MX Vertical-muis is ontworpen en getest volgens criteria die zijn opgesteld door vooraanstaande ergonomen. Verlaag spierbelasting terwijl u productiviteit verhoogt.
Have a lot of friends who have used this, but I think it feels shite
I ordered the Logitech m570
@fading zodiac do you have a shitty chair?
Just got a new one
lol
Herman Miller FTW
Yes, but i aint got that money atm :/
Ikea Markus 4 lyfe, and the backapp chair for long days
I just came from Markus :/
what'd you pay for that chair?
200?
my HM Embody was only like 450
I love the Markus, after removing the arm rests
in this corona thing, i needed reviews
The Markus is decent and affordable, the HM rocks if you get the good ones
you can find used Aerons constantly for ~200
yeah, all that starts at your elbow
So im not sure, if i should get used to use my left hand to mouse
You would think rich people would have an easier time avoiding the virus
have you tried using a touchpad?
f.. I think I just deleted /boot/efi ๐คฃ
are you resting your wrist?
Trackball, and ergonomic keyboard, plus better posture
if so, cut that out
Love it for long days
Where did the rest of the bike go?
lol atx with his bull saddle
I got a lap desk and put my touchpad in my lap wherever my hand felt comfortable being
๐
and I got a goofy ass keyboard
Hm
Hmm thats nice
I had one half on the desktop, the other half on the lap desk near the touchpad
Yeah, not having the wrists all twisted can make a huge difference
between getting a chair without crappy armrests and those changes, it fixed me right up
Armrests ๐คข
I was going to get one of the crazy vertical keyboards but they were $$$$
Trackball doesnt work for my, my thumb is broken ish
lol atx with his bull saddle
@forest edge Loads of questions got answered today.
thats for sure
Best wyze sensor alternatives for the uk?
No wonder he throws up for anything and everything. Must be sensitive @forest edge
@unkempt night Xiaomi
also #hardware-archived
all that up and down motion ending with a few side to sides and throwing him off
Best gateaway for the xiamoi thing?
@clever mortar you say trackball over vertical?
For me
Never got on with the vertical things
my thumb is a weakspot and hard to move somehwat
Yeah, but you can return stuff to Amazon ๐
People return stuff? 
normal people do you hoarder lol
For the M570 the thumb movement is about the equivalent of between two adjacent keys on a keyboard, maybe 2.5
Of course, since moving to a trackball the thumb muscles have developed a lot more on that hand ๐
Sounds useful 
Great for crushing eyeballs... or peeling oranges
@clever mortar so the WAF was high?
I want a answer. I aint doing it with a smiley :p
I couldn't use a trackball as a mouse, i would feel like i was playing an arcade https://p1.liveauctioneers.com/1097/144650/73131321_1_x.jpg?auto=webp&format=pjpg&version=1&width=512
@shy comet you loving this rain or what ?
@tidal bronze haha yea....about to start making some chili cuz of the rain
no snow?
You with your SNOW
not in the valley lol
it said snow!
IT was wrong
maybe at big bear they getting snow lol
well thje weather on the news is 50% usually wrong lol
See any snow in there ?
maybe it melts when it touches the ground
i hate how the hpkins map splits the US death count up by state yet for everyone else it's by country
sorry not by state, by county in state
photoshop
welp they say after this is all over there will be even more fish in the sea for all you single men with divorce's going through the roof
that would suck to be stuck at home with someone you despise
Thankfully my wife loves me 
she see's how you ride your PC chair and likey what she see's ๐คข
lol my wife always gives me the sad eyes when the house doesn't do what she wants
am I supposed to piss in the dark?
@tidal bronze we have better skies in Ohio for once!
fixit!
pollution is down all over the world

One last cal, done for the day. Yay!!!
@wet pilot yup same here my wife usually says "the house is revolting"
lol i am ๐
to see the snow
ahah
@dull chasm is so attracted to snow. Wonder what the deal is
ServiceNow? ๐
Someone mentions snow he comes running.
i like to visit snow. I don't like shoveling snow
oppistes attract i guess ๐คทโโ๏ธ
You like to move to LA ?
no ...its a love hate relationship
ah huh
and yall are not gun friendly
me and zombu come over and make cali Great Again
dang nothing ....i expected somthing
๐
inb4 edit
i wonder how much time is spent on updating the public on everything......every day
theres at least 4 daily press conferences
More the better.
a lot of it I've seen is rambling by people who won't defer to experts
Governor Newsom will be re-elected for us
and validation of conspiracy theories
oh yea thers a lot of that
also, statements made to avoid taking responsibility for things
10,389 we talk about numbers but that's someone saying good bye all lone. Sucks!
from what I've read from hospital workers, it's probably one of the worst ways to go
Yes. Exactly. I am so pissed how this was handled. The fucking FLU. Yeah right.
ol Boris "I'm not going to stop shaking hands with people, I've just come from hospital and met with many patients and shook each one's hand" Johnson is in a critical care unit
karma
yep
yup
we can chalk that up to the idiot tax
when did that get changed
@wet pilot I guess we can work that into a tariff one of these days
heh
Governor Newsom will be re-elected for us
@shy comet same here. Our governor will be re-elected for sure! He is doing an amazing job.
i think NC gov is safe too
Heโs made decisions without waiting for federal govt.
@last plaza yes very well done in OH. Cried wolf so people are safe now.
Yep. Weโre so glad.
looks like NC is going to beat the curve. They just adjusted the statewide deaths projection down
Hopefully we will have more ventilators in the market soon. We got some good prototypes. https://m.youtube.com/watch?feature=youtu.be&v=zZbDg24dfN0
I just watched that video
there's only a handful of parts in that whole thing that they don't have hundreds of thousands of available
which is awesome
Yep. Just with existing car parts.
it's a way better option than tooling up a line that normally builds F-150s to build some other company's vent
Yup. Makes total sense.
yeah, the Ford one is kinda cool
I think the "mixing tank" is the airbag tank
its a lot harder these days for manufacturers to change up their production on the fly
because robots
you can't just take over a ford plant and have them make planes anymore
yup, automation is king
and tons of fixtures to ensure quality
would have to toss all that out
but having the ability to pull both SpaceX and Tesla engineers into a room to build life support stuff is awesome
It takes time to set up robots, but after that, it will be super fast.
Thatโs the only way they can scale.
yep, the re-tool time is no joke. Just look at how long it takes to switch factories over for a new model
hi
Yes.
@brisk sedge hi
usually end up shutting whole lines down for months
wondering if anyone could help me with duckdns
but then, once the work is done, they're probably back to 90% production levels on day 2
lol
@brisk sedge #integrations-archived
TSLA is their own supplier, its a bit different there
thanks @last plaza ๐
Thatโs an advantage for TESL guys
keeps their costs way down
Yep
took him a while to realize that suppliers couldn't produce what he wanted when he wanted it
some was that, others was a choice to speed dev time
and now he's got those crazy multi-axis CNC milling machines making vent parts
Model S used a BCM from the ford fusion
That guy canโt sleep. Good for us.
@wet pilot but when they received container after container after container from a supplier of parts then then had to turn around and rework because they were out of spec, sometimes you gotta cut bait
oh totally
i think their intention was always to go fully in house, but building that stuff out takes time
so go the short term route and use an off the shelf part that isn't 100% but enough to get the product shipped
iterate and improve down the line
NVIDIA: hey Elon, we made a new chip
Elon: Cool, can we work a bit on the price?
NVIDIA: Nah, this is the best we can do
Elon: builds microprocessor factory and starts making his own chips
NVIDIA: Wait, that's illegal
they are hard subscribers to the "fail fast" model that's a lot more common in the software dev world
@last plaza did you get one before they redid the back seats?
14 states exempt religious gatherings.....next week gonna be tough
such a stupid decision
i think the NC one is "exempt" social distancing is still mandated and they have a higher cap on participants
GA Governor: I'm issuing a stay at home order for 10 days
Also GA Governor: I'm opening our public beaches
though my county has not exempted religious gatherings from their own order and the NC order states that if there are any conflicts, the tighter restriction wins
what was Mike's quote from Breaking Bad?
something like "never do a half-measure"?
the GA governor's administration is threatening legal action against mayors and city/county managers that implement tighter restrictions
wow
he learned from the "best"
So cool to have brilliant people as governors
We have national guidelines, and counties can enforce stricter if they want
So anyone travelling north from the South will have to be in quarantine for 14 days 
we have like 3 levels deep to deal with in most cases. sometimes 4
Fed (nothing) -> State (usually something) -> County (can be stricter) -> City (omg why)
@wet pilot yeah, your system is just screwed from all angles in all regards at all times under all circumstances 
Charlotte decided to work directly with Mecklenberg County to present a unified front
NC order was modeled after the MECK order
@clear ferry that's kind of common in civilized parts of the world.
You mean the two countries that have similar systems, the us and Liberia ? 
Remember I told you, where it matters ๐
Hi folks, newish to home assistant, generally clueless. ๐
Hi, we all are ๐
heh. I haven't even bought any devices yet, dizzying amount to sort through. Thinking I'll start basic with zwave/zigbee to learn with
Xiaomi are cheap #zigbee-archived devices, usually 1/4 or less of #zwave-archived , 433 MHz is also very cheap
Depending on your needs
@last plaza did you get one before they redid the back seats?
@last dirge I didnโt know they redid the back seats. Not sure whatโs wrong with those seats.
Mine is good.
You can build #diy-archived WiFi devices for a few dollars too @tender forum
@last plaza do your seats fold flat or do they angle?
Atxbyea: With sonoff?
Never folded the seats ๐ never needed so far. I got a mini suv if I need to bring anything big. @last dirge
Sonoff are finished products, you can do your own in a few minutes if you are handy
Let me check
Again, depending on your needs
you have the old seats
Huh! ๐
is the seam on your front bolsters straight across or angled?
I'm good with the hardware side, it's the software/programming side. Pretty much rely on cut/paste, google to fix that, and profanity
Then look at esphome @tender forum
no, the seatbacks
Will do, thanks ๐
@orchid rose https://i.redd.it/ncrm4syv08r41.jpg
Time to go on a quick bike ride. Gorgeous weather today!
@last plaza https://wewritethings.co/wp-content/uploads/2017/02/giphy-63.gif
@forest edge is that you? I have a sit up ride bike. It can never do that ๐
that is a sit up ride bike
wasn't till the 90's crotch rockets came to be
evverything prior was basically the same style
That means the guy is an idiot ๐ Iโm in my 40s, I donโt do that anymore. I did that a lot as a teenager, but not bullet. Those were Yamahas and Suzukiโs.
Yes, this motorbike is so powerful, it can lift the front wheel even when riding at 70mph. Gotta be careful for sure!
thats a scene from the movie Grease where he learns to ride a motorcycle for the first time from a bike he rebuilt from the junk yard
I think it's a honda
6 digit confirmed cases, 5 digit deaths so far in the USA!
Numbah won
Before I clicked on this headline I thought "Louisiana" and I won https://www.nytimes.com/2020/04/05/opinion/coronavirus-google-searches.html
yay
@forest edge
I'm not okay with all this Orwellian police state garbage.
๐ค
that addon is weird representing those states with smile faces lol
@rain swift what parts are you ok with?
@shy comet testing xteve with plex. Will let you know how goes
@shy comet none.
@forest edge you don't like smiley for recovered? ๐
@rain swift so you would be ok with a million people dying as opposed to 100k?
how many do you think will die if unemployment hits 25 million. ๐ค
Quad, that pic you sent last night for Samsung TV, is that the Home Assistant official integration or a custom component?
also there is 0 evidence of a number anywhere near 100k happening.
Less than the alternative
and maybe you should wait for more than 10k people to die before you burn the constitution and hand over all of your freedom, your livelyhood, etc. etc. etc
@last plaza would think a hospital cross symbol or something would fit better
@green inlet looked like custom. Home assistant official integration doesnโt look like that.
they go by trends
the trend will be venuzuala
and you'll be living in the street
hoping someone doesn't stab you for a cheeseburger
๐
@forest edge like ๐ for dead? ๐
i think in venezuela they have the dead in teh streets now cuz no room in morgues
also there is 0 evidence of a number anywhere near 100k happening.
@rain swift they are estimating 100k as the minimum but hoping for under
And they were already fucked before this started. Not a good comparison
@last plaza that could work or even a red X or something. something that isn't a smiley lol
the real issue rightn ow is that we dont crowd hospitals
who is estimating lmao
the msm liars said it, or the government, it must be true
I couldn't pull 1,000 times they lied out of my butt.
Dr Burke and the other doctor
Trump's press briefing daily been saying that for weeks
Cedars Sinai
@green inlet custom through HACS
all I know is you better be ready for thunderdome, I don't know what you people think it will be like, but people will be out there who will slit your throat to eat dinner another night.
so keep hiding under your kitchen table, you'll be fine, for a little while.
Thatโs why I canโt find it. I donโt have HACS
@shy comet Ohio governor made a decision to expand hospitals before they are full. They are looking at convention centers as a temporary place.
Thatโs smart.
yea we started using LA convention center
Vegas has huge convention center. When shit hits the fan, we can send them to Vegas.
@rain swift , what are you smoking. I want some
My county is commandeering dorms from the local university
@last plaza you mean the vegas parking lots lol
@last plaza then they would sneak out to hit the slots
@rain swift lots of people are preparing for that scenario as well
i live in LA we riot when our team wins the championship lol
Right. This ๐๐ป
The heathcare system is our biggest threat. Because so many are uninsured and under insured they are finding out out a great number of people aren't even going to get tested out of fear of hospital bills so they just roam around spreading it lol
I was watchign LivePD this weekend.....they were asking cops about the latest trends
@rain swift we have @dull chasm with machine gun if that becomes a reality.
since everyone stays at home, they can now focus on problem areas lol
but even those areas are light in activity
riot team aint gonna save you
From what?
I guess none of you like having jobs lol
Domestic charges are on teh rise lol
AR-15 surely will.
@rain swift where do you live? as in state?
I'm curious how you plan to feed your families of the economy collapses because everyone is scared
i work remotely and my entire company went remote for all of this
I live in florida.
oh ok
That explains! ๐
many want the camels back to break
LMAO
Guess you didnโt see the market today
and if it all goes sideways, I'll be out hunting for dinner. ๐
in florida? does Geezur taste good?
gun stores in LA have lines as long as grocery stores do lol
I had everything I wanted before this
Time to add more survival items to you shopping cart @rain swift
I haven't panic bought anything
@rain swift is almost out of TP and starting to panic
lmao
Do you have a 100 gallon tank of water in your basement?
hes got about a 1 month supply there
Hodl that tp
maybe that 2
That there TP be worth more than GOLD!
That's a retirement state, pretty sure everything is chill and nice. I totally get you are not worried and rightly so @rain swift But the machines that run this economy we are worried and rightly so.
yeah, and I have lead and brass to defend it. ๐คฃ
I live in the biggest city in the state unfortunately.
I go to Florida every year. People hardly speak English there.
thats south florida
lol
aka little havana
bunch of click click click huh
I'm near the GA border lol
Yup. Every restaurant you go, no English music either. I told my family this is what I feels like when you go to a foreign country. ๐คฃ
We visit foreign country without spending too much ๐
they could sink the bottom half of the state honestly lol
Quad, this is what I tried
https://github.com/roberodin/ha-samsungtv-custom
except the part with magic kindgom
@rain swift even Orlando! Like Kissimmee and all.
just sink everything a little south of that
Here you go https://github.com/jaruba/ha-samsungtv-tizen
naw, disney is the only thing I like in this state haha
Happiest place on earth.
Even if I go there I try to stay in the room. Humidity sucks. I have no idea why people retire there.
they like the heat
after looking at the Hopkins map over the past few days and seeing the wave of reported cases sweep from right to left across the US I have my doubts april will be our last month lol
I hate Florida water. Especially near Disney.
@forest edge im guessing closer to June
once the midwest falls (where i livve) you all will starve
It smells so bad, I use bottle water to brush my teeth!
it depends how bad this weekend gets with Easter
@last plaza LMAO dude bottle water to brush teeth? I don't do that even in SA
I filter the water
I mean, seriously.
I do that every year!
I wash wine glass with tap water, then with bottle water. Then only I pour wine in it.
Most people have water softeners. I used to live in Florida. I would love a second house there for the winters
Why on earth do you go there @last plaza
you know wine is alcohol right and kills germs?
Kids. No other reason. Their happiness is our happiness.
Makes sense.
I donโt like spending money there, but have to do it for kids. They love that place.
Every year, $10K waste to be honest.
take pictures and make a VR experince
anyone else disappointed we havent seen zombies yet?
much cheaper
lol
I HAD to go because friends met with kids from like 4 countries. That would be the only time lol
I could buy a Harley Davidson every year with that money.
Any you guys see 60 minutes last night about the AI they are doing with holocaust survivors.
@shy comet not really. considering the majority of the zombies would be 80+ year olds with missing teeth
@forest edge which state are you from? MO?
disney isn't much if you are a pass holder, don't eat there and don't buy stuff there.
I am very disappointed there are no zombies.
give it some time
and everyone around here is going out to parks and acting like we somehow missed it
yup - that's the beginning
yet finding paper towls here seems to be a challenge, go figure
wait till things get worse - here, they have a queue system for almost every store starting tonight
Right now, very few people here without a mask outside. I flip when I see one without.
people here won't change unless someone they know dies from it then they will start to listen
hell look how long till our governer issued a state wide stay at home order which wa sjust last week lol
nobody is forcing you to leave the house, this is why I don't understand demanding the govt poop on everyone else's rights, if you're scared, stay home.
people are grown, they can decide to take risks, they do it every time they get into a car.
you have more chance of dying on your motorcycle than you do of beer virus.
worried about your parents? tell them to stay home too.
it's not the risk the people who venture out take upon themselves the issue, but them forcing the risks on others they come in contact with
Exactly.
people have to work at grocery stores and other places lkol
The problem is not having enough education to put 2 and 2 together.
no they dont, they can stay home
you are FORCING people to not be able to work who WANT to
oh they can stay at home? then what would you do when you start to starve?
and do you freak out like this every year over the flu?
or drunk drivers/
or anything else? no? why not?
you are so missing the point lol
250k die a year from medical malpractice where is your outrage? what have you done to stop it? nothing?
no you are missing the point
drunk drivers are not contagious
you have let fear take over your brain
go tell the government to lock you in a gulag and keep you safe
leave the rest of us alone
unless you are posting this from a crowded public place your words aren't carrying much weight
I feel sorry for people that compare COVID 19 to drunk driving and opioids. There is a choice on that.
I feel sorry for people who let fear take over their brains
anything that would spread from simply being in the same room should be concerning!
Exactly
and cry for the government to take everything they have for the promise of safety
its sad
and you'll get neither
they could lock down the planet for a month then what? you step outside and get sick anyways lol
you gonna live in a bubble forever?
this all because your scared of becoming jobless?
you want everyone else to die so you could buy amazon stuff?
LMAO
oh, boy! LOL
yep oh boy
Yesterday clicked on conspiracy YT video and 1st comment was by flat earth new Zealand I quickly clicked away
sad part we could have been in a much better state if the government hadn't acted like "it was like the flu" for a whole month when the shit hit the fan
lol
@rain swift , what you fail to realize, is the virus is not the issue. It is the overcrowded hospitals that people who really need care canโt get or doctors making decisions on who they are going to save
the only good show in Disney+ is the Mandalorian... don't even know what's good on AppleTV+
Disney plus can go f itself. stealing all the marvel stuff and now that the MCU lineup has been pushed back they have nothing to release during any of this crap when people are stuck at home lol
really? what is that?
Let me see if I can find it.
Avenue 5 maybe? Westworld 3 seems crappy, maybe it's that
mcmillions is pretty interesting
WW should be fun... I will wait and then binge watch all of them
Whatโs the premise
Gotta watch it
Ok, think it is next. Still have to watch Ozarks season 3
Theranos was fun to watch!
I am currently watching Ozark S3
@green inlet watch WestWorld if you haven't... its an old story, but a new re-make.... using latest technology and twists
i liked the first westworld. second one got alittle iffy but this 3rd one.. I just don't know
nice disney parks are posting recipes to tide people over
looks like i found dessert for tonight
well nows a good time for that lol
I have to be up at 0300 ๐ณ
Thatโs my problem. I always watch tv laying in bed. See about 15 minutes and ๐ด. Then Netflix plays like 3 episodes while I sleep. Next night, takes me at least 10 minutes to figure out where I was. I end up overlapping some, fall asleep, rinse repeat. I end up seeing about 3 minutes a night
@green inlet that's when you know you're getting old! ๐
yup
Yupper
Do you have a smart watch that monitors your sleep
i use the mi band 3 with sleep as android
I'm not sure if there's any useful sleep data on there to turn off the tv
sleep as android has automated sleep tracking based on phone usage and usual time to bed etc... it has tasker events and you can use the start of sleep tracking to trigger it to turn off
All the boom mics for headsets seem to be backordered at the moment
I can't imagine why
Here's me wanted to just steam chat with friends playing factorio and all these selfish people want to have meetings with their employers.
Same for civ
hey guys trying to use VS code to do some code editing , is there a list of shortcuts or commands that I can use to mode a indent a block left or right, individually moving 500 lines does not make much sense to me.
thanks much
Ctrl + [ and Ctrl + ]
@hushed basalt fricking newbs who don't have WFH already established 
Have it established but still disrupted by wife and baby being home
Yeah, the baby joins me in conf calls
Customers love it 
hang on just let me walk Infront of the phone camera dad
Teams plus headset + phone camera works very well tbh
I really enjoyed how fast teams is to change presentation window too, Skype used like 1 minute to share, teams is almost instantaneously, really well when I do workshops and switch between different presentations and windows
I can imagine using teams video chat in the DC too because the phone video camera quality is so good these days it is easy to show errors and other stuff
yoo whats poppin
wait is that locally
Been in beta for a year or so now
looking at the figure it communicates with the device itself @clever mortar not with the home assistant
Home Assistant will be the device ๐
ah oke
Just like if it was Hue it would communicate with the Hue Hub
yet
GHome doesn't have built in Zigbee, Z-Wave, etc etc etc
Google have stacks of developer documentation
They're just a Google search away...
probably mainly for converting the command do a json
but its a great step forward
๐
Learn how you can implement local execution of your Smart Home Actions using the Local Home SDK.
Learn more about Local Home โ https://goo.gle/2rNTQv3
Twitter โ https://goo.gle/2PYbOCS
Google Assistant Developers playlist โ https://goo.gle/2SwBLui
Subscribe to Google Develo...
@clever mortar how long will it be before we can actually use this do you think?
How long is a piece of string?
?
Exactly
Is it a base64 string @clever mortar ? 
If so the length is divisible by four at least
@hushed basalt , no smart watch. I monitor sleep the ole fashion way. And I watch Netflix on an iPad so canโt turn that off. I actually couldnโt sleep last night and powered through several episodes of Ozarks.
@strange vapor we can do midi to mqtt, let's make a fanfare smart house

Electric light orchestra just got a new meaning
your fantasy is huge @clear ferry
Latency could be a pain ๐

He took a photo of what he sees in the mirror

That camera wouldn't survive a day with my ass
are you that fat that your ass slides in
you wash your ass over there after a dump ๐
Anyone here use Node-red?
#node-red-archived @unkempt night
Thank god there is only like 5 mainframes left in Norway, although that is 5 too many
Such a terrible waste. There must be dozens of grains in there!
Too bad the installer will screw it up anyways
@low harness unfortunately I've had to throw all of it out because I can't stand imperfection
OCD is a cruel mistress.
what kind of devices are people using to run HA? I am thinking wall based tablets for hitting the buttons etc. not the PCs, laptops etc. I have a old Fire 7 5th Gen but its not great as I cant update WebView version without complicated rooting process.
@clear ferry greenhouse or growhouse? :p
Greenhouse, I am not a programmer

@dry mulch 99% is automatic, I use a tablet just to check status on the fridge, and my mobile to open the garage door and such
@clear ferry awesome! maybe I should follow that path
I don't use the UI of HA that much myself, most stuff is automated instead. The little that I do, I just use the excellent web panel functionality of the Vivaldi browser on my desktop or laptop
I kinda want a tablet just to run floorplan foor the wow effect, but I have a feeling it would be absolutely worthless ๐
Will check out Floorplan. I was just thinking it would be nice to have a family calendar and media player control on the wall for easy access
No sign of spring in Northern Norway. On this day there are several snow records broken. This is from E69 to North Cape. - https://i.redd.it/k6rkls0flcr41.jpg
@dry mulch Sounds like you want a magic mirror type setup as much as anything else
I almost managed to finish drilling holes in the greenhouse box before the baby woke up 
ok thanks @clever mortar Can I magic mirror on to a tablet and also have usable buttons or is it just a mirror with no interaction as the name suggests.
I have no idea
fair enough
Probably depends on your software choice for the mirror, and the hardware ๐
thanks
Norway announcing future plans for the country now
apparently we have a transfer rate of 0.7 now probably opening kindergarten and primary schools 20th of April
Probably a lot of hidden numbers there yes...
https://www.reddit.com/r/Coronavirus/comments/fwl3pz/staggering_surge_of_nyers_dying_in_their_homes/
I'm running AdGuard now via docker with MACVLAN on my HA host -- and I want HA to be able to talk to AdGuard so I created this shim network and a direct route
ip link add docker-shim link eno1 type macvlan mode bridge
ip addr add 192.168.1.15/32 dev docker-shim
ip link set docker-shim up
ip route add 192.168.1.6/32 dev docker-shim
Is there a "ubuntu" way to automate recreating the shim on host restart?
Not sure about that, don't use shim, but how much latency does it really add to make the route out and in again?
well it's a necessary evil due to the constraints of the MACVLAN driver
Note: In Macvlan you are not able to ping or communicate with the default namespace IP address. For example, if you create a container and try to ping the Docker hostโs eth0 it will not work. That traffic is explicitly filtered by the kernel modules themselves to offer additional provider isolation and security.
Doesn't a macvlan just create a bridge in reality, so that the container gets its own IP stack?
Interesting, havent tried it yet, but I know @low harness uses it
Huh?
Yes, a bridge, pretty much.
If you're a networks guy, you probably wouldn't call it that, but close enough.
I leave most containers on the internal docker network, which creates a veth off a parent bridge interface, yes -- and run HA in network mode "host"
but for AdGuard, wanted MACVLAN due to all it's port requirements
fumbling with network-manager to get it to create my shim virtual interface on boot, but no luck so far
While you can't find the host on the macvlan network, you can connect a container to several networks.
Such as macvlan and default.
Your problem goes way over my head, but that realization has solved every problem I've ever had with it.
Yes, I could maybe add HA to the MACVLAN IP space to let HA and AdGuard talk to each other
but I still want to be able to pull up the Adguard Web interface from my docker host -- which is my new stay at home daily use workstation
which is why I created that shim interface and and an explicit route
Attach adguard to default then.
I'll try that
It's already attached to default....by default.... ๐คฆโโ๏ธ https://hastebin.com/eviboluqic.coffeescript

@late gate I'm catching up on the folding@home HA team
And I only have my laptop working
I need to make some fun logics with my greenhouse, where I measure average soil moisture across multiple sensors
Water one end lots, the other end not at all, average is fine ๐

With people staying home AQ is outstanding ๐
Norway wins again 
hmmm lower the better. LMAO
Shitty list sorting then
@shy comet tested https://xteve.de/ with plex. Integrates very easy, slight delay to start stream but great to have all in one place.
nice! yea im just more of a fan of tivimate the interface is soooooooo easy...IMO its the king of IPTV apps
does xteve restream from your server IP?
so if you stream it counts from the server IP? so if your friend streams a channel itll both be from same IP?
Number of streams == Number of Tuners in xteve. It's a pass-thru so provider stream cap remains
ok so the IP cap remains
yes
The live TV bit isn't sharable though afaik





