#the-water-cooler
1 messages · Page 312 of 1
TÜV approved
no, I just know more than you do and wouldnt be asking these questions at all.
well here is the question, do you have the proper tools and safety protections? do you have a current detector, multimeter and protected tools?
😉
the fact that you can't even answer whether a junction box you want to tap is hot or not
What
means you lack the knowledge at a fundamental level to be touching mains.
Thats not what I said
do the landlord special and just shove some caulk there
(/s)
what you just said?
Well lemme grab a multimeter and find out
honestly some spackle and a smidge of paint an no one will ever know XD like legit
Thats not what Im asking you guys
and yet; it feeds back into the question you did ask.
and is that junction GFCI protected? again; sort of important questions.
That was standard in Europe for a while yea, it trips around 35mA
you don't know if its live or not
and you're already making presumptions of safety?
Because I havent grabbed a multimeter yet?
hint: a question that should've already been answered/never asked to begin with when dealing with mains electricity especially in a wet location.
i will say this, if you have the right tools and know how to practice electrical safty well there is no real problem, but it is one of those be careful and if you think you are getting above your head stop and ask for help
just be safe
Okay I know how to handle electricity, I've wired up this entire house more less myself
I just didnt do it in the bathroom yet
Its not a linux forum discussion its a
"This is why there are laws around people who don't know what they're doing touching mains."
... uhhuh.
And well, Idk if cable channel will stick in wet rooms
thats why you're not sure if the junctions good or not..
thats where i was getting at honestly, thats why i asked if you had the tools and protective stuff. you cant learn if you never try but when you try make sure you have the right tools and practice safety
Okay you are going in blocklist, you are so insufferable you belong on Reddit
and you're the reason we have comically strict laws around these things. 🙃
Well, no, issue is that Ive never had the problem of running a wire on top of tiles before
And now we all calm down a bit.
also one thing to keep in mind is wherever you expose those wires when you are done go through and heavily scritinize the work and make sure EVERYTHING IS SEALED. just dont want any arcing. when done just do a bunch of passes with your multimeter for continuity around the spots that might be the weakest
i knows its obvious, but i saying it juist to make sure it was said. make sure to not let the wires go into the natrual path of the water in any drainage situation
asking very basic and obvious electrical questions.
no actually the real problem is sticking things to tiles!
I wasn't worried about that, there is a fan powered by 230VAC up there that previous owner had installed
And junction box is like a few cm to the side of it
Im more worried about moisture or freak accident where shower head explodes, idk
like i said lol, it wasnt pointed at you, i just said it to make sure it was said is all. id rather say it and have you say "i know" than not say anything and have the chance of guilt you get fried XD
If I touch a live wire it's not fault of the HASS discord, no? 😄
Stop feeling accountable for me ffs
If the belt winder is not sufficiently IP rated, the cabling has some wesk spot and that area gets wet, accidents can happen.
Best case a short, worst case injuries or death.
Well, belt winder wouldn't be exposed to direct water in any case
@little steeple in a lot of countries you are not allowed to place electrics near wet stuff. Minimum distance 50cm (thats EU)
well its still just good practice when talking to someone who you dont know. either way, i rather alive people hacking away and learning more!
never
tittycalming
Is that only in X axis or in all directions?
yes
what about negative distance!? /s https://www.youtube.com/watch?v=cNjA0aee07k
This device is apparently quite common in countries where electrical standards are more relaxed and the climate is a bit milder. It's basically a chunky shower head that has a heater built into it. If you do a search for suicide shower on the Internet you'll find various pictures and videos of these things installed badly.
If you do find one o...
condensation and a generally humid environment can cause water to migrate to unexpected places
Yea thats what I was worried about
no one here to show me titties to calm me and now i am more sad
bet that tile won't be exposed to water either.
and I bet it definitely won't allow water to infiltrate where it shouldn't be either. 🙃
condensation...
really A++ quality renter who is drilling holes in tile.
This is the first and only time I have ever gone on a landlords side.
That device is really close to the shower. If someone points the shower head the wrong way, water can get over the shower enclosure and hit the winder easily.
And condensation as well.
I mean why tf does that piece of turd need 230VAC anyway
Im sure it downconverts it internally
yes internally in your shower..
Well this is the belt winder in question
I didnt find any schematics but Im preettty sure it will have a 5V rail for the smarts
noticed, it sits next to the cracked tile
Cracked tile is obligatory ok, it makes it go faster
There is nothing more infuriating than a program with a memory leak...
anyone else wants to bet that.. its not rated for a shower at all?
Oooh wait a second
make poll
Rated IP20 (only dry rooms)
cracking tiles after reading labels that say it doesnt go there.
genius level of DIY
THEN DONT
dipshit levels of DIY.. jfc..
this is why there are so many laws about DIY electrical work. 🙁
omg
i'm sure the landlord definitely won't notice the unrated device ontop of the cracked tile thats going to be hilariously expensive when that lease is broken eventually
smarthome fan electrocuted while taking shower
darwin award winner*
Eh prob cheaper to heat water that way than using gas furnace
repeatedly warned against thing.
Did thing anyways.
yeah..
But yeah Im not a fan of no PE
gonna take a shower now.
How tf did previous owner seal up the fan I wonder
Hint: bathroom fans are rated for being in the bathroom
IP20, no PE, close to running water,...
Bcuz you can see here
how did the previous owner buy a device that is usually installed in bathrooms!?
Fan is running off 230VAC
Im guessing the junction box is for the fan most likely
guessing always is a good thing to do when altering live wires
Nah you dont guess
make finger wet before you feel
You short it out to find which circuit breaker its connected to
Obv, otherwise you dont get tingles and you dont know if its live or not
IPX4 rated (splash water)
if only we knew how products rated to be ventilation fans for bathrooms were rated for their uses.
So, do I replace the internal downconverter with something that takes in DC directly?
Cuz fuck 230VAC running in the shower obv, but well, what are the alternatives
going back in time and smacking oneself really hard for not listening to the IP rating of the device prior to cracking the tile?
Using the right tools for the right places.
I dont think there are electric, let alone smart, belt winders that are rated IP4X or IP5X even
Then you cannot use an electric belt winder there. Or need an alternative like a motor for the roller shutters.
Which replaces the belt mechanism.
That one would be a pain up the ass too, but I guess an option
Nah cuz Im thinking tiny motor inside the belt winder is prob DC
If I fry the device, but theres only like idk, 24VDC coming into there, nothing "bad" will happen
Automation isn't always the answer. My garbage disposal in the sink is the only manual switch in my house for a reason
So it might be cheaper to replace the PSU inside the belt winder
because if you're gonna shred a burglar's hand you want to see the light go out in their eyes? /s
I have never seen such a sunk cost fallacy in progress.
this is hilarious.
I ain't accepting manual window shutters xd
you mean sink cost fallacy surely
-# I know you didn't mean the garbage disposal thing
-# see dad joke, say dad joke
Only other alternative would've been replacing the motor which is like 350€
that belt winder I paid 60€ for, with PSU change maybe 100 total
Tbh I've never cared for automation in bathrooms either apart from perhaps timer switches for the fan
ffs don't post my onlyfans here
Youre telling me youre not flushing toilet via HASS?
Heated toilet water
Nabu, dispose of my casa caca
rofl
btw there's zero chance some techbro in a tophat didn't try that in the 1900s
"electrify the water closette for odor elimination"
How would that work
who cares
you know thats not what you need
I did say techbro
🤣
I mean there are like those uhhh, electric lighters yea?
You can just combust the foul gasses right away
"Eliminate source of odor." - "EXTERMINATE!"
r/gifsyoucanhear
its certainly possible to do this.
You just have to y'know.
Use a BLDC motor instead.
since they don't care about moisture really.. 😛
I am actually starting to believe in my own idea
dont let your vibes be dreams
no because like, poop gas is mostly methane [citation needed] and I fucking bet you can splice it somehow, also ozone smells better than farts
-# some redditors find this credible
nevermind keep your vibes as dreams
spicy oxygen
ah, here we go. I asked my local Gemma to write up some technobabble:
"The electrification process triggers electrolysis to generate trace amounts of ozone directly within the water column. This potent oxidant aggressively attacks and breaks down odor-causing sulfur compounds at the molecular level, converting them into odorless, inert byproducts"
you shouldnt be smelling ozone either..
ait fellas I'm off to gofundmebro
I'll make THOUSANDS
and relocate to a non-extradition country post-haste
correct, I don't 😉
This has to do with farts doesn't it
LOL I knew it
Why are farts so taboo
Like
Saw a post on reddit about it
So you're saying I can funnel farts into a gas furnace?
You could
Hmmm I wonder what the exact composition of fart gas would be
Did anybody analyze farts in a spectrometer yet?
The total gas the subjects released ranged from 106ml to 1657ml
You know that alone worries me, poor guy that produced 1.6 liters of gas
Didn't expect H2 to be the biggest constituent tho, learnt something new I guess 😄
Amazing that the guy with 1.65 liters didn't just float away tbh
Spontaneous combustion might also be a concern atp
Single-handedly causing global warming
I found the perfect car to put this magnet on
I hate that I have to walk past one of those hunks of shit daily on my dog walks
It’s proof rich people have no class or morals
Near me there’s one of those that lives its life under a camo cover as if that hides the angles
That camo cover currently has an additional black cover on top for some reason?
I see these rolling dumpsters by me from time to time and they just look so dangerous for all other road users, especially pedestrians and cyclists
Excellent, bonus points for him being parked over the line.
Yeah it was meant to be. I found the magnet last week about 10 car lengths away so I was just returning it to its home
Yeah they shouldn’t be legal on the road
Especially with it being an aluminum cast frame including where the tow hitch connects
If you see one of these towing a boat or heavy trailer get the fuck away
I didn't know that the Cybertruck panels would hold magnets
It’s literally just a giant steel body of glued on panels
they're stainless, which isn't always magnetic
I can't stick magnets to the front of my refrigerator, which is stainless
It’s really frustrating this shit can even be on the road
They sold you a fridge that can’t take a fridge magnet?
I want off this wild ride
the sides are magnetic
I thought magnets stick to metal and stainless steel is metal
that would be incorrect
I just looked it up science fucked up on this one
They made metal that doesn’t work on magnets 🧲
Stainless steel is indeed metal though, so you got that right
✨ Physics ✨
✨ Pigeons ✨
Pigeons are definitely not magnetic
Not with that attitude
Spoilers for Undertale Yellow: https://youtu.be/maBZS9FVRVc?t=104
The final part is what happens when you try to open the game again after the ending
You can get the game here: https://gamejolt.com/games/UndertaleYellow/136925
0:00 Intro
2:00 Martlet Phase 1
7:13 Marlet Backstory
10:50 Martlet Phase 2
14:58 Flowey
17:30 Road to Asgore
20:35 Ending
23:20 Credits
23:52 Reset
Lots of iron fortified bird seed
birds already swallow rocks, right?
Birb would know
Bird would know. I’m just birb. Speciesist
unless you're just a human in a chicken suit
Such rude language in a family server or something
Public clucking? In my non-denominational water cooler?
is there a simple chat for asking quick questions? Or do I have to create a thread in the Support section?
No and yes
Questions go to support
Unless the question is “how many racks do I need before I have a raccoon?”
what a coincidence!
anyway, I found what I was looking for
but do let me know if you have an answer to the quantity of racks... I am quite curious on that one
So, how many racks?
wait, I thought I was supposed to ask about the racks
We’ll accept either scenario
1
gemini seems to know...:
Technically, you only need one—provided it's the right kind of "rack."
If we are talking about the word itself, you just need to add two letters ("o" and "o") to the end of one rack. However, if you are looking for a more "punny" breakdown of how many racks it takes to build a raccoon, here is the math:
The Raccoon Composition
1 Rack: For the base infrastructure.
- 2 "O"s: These represent the dark circles around the eyes (the mask).
= 1 Raccoon.
On a more serious note, if you are asking because you’re worried about your server room attracting actual wildlife, standard data center best practices usually recommend keeping the number of raccoons at exactly zero. They are notorious for cable management "adjustments" that usually involve their teeth.
Are you planning to expand your current setup, or just looking for an excuse to get a trash panda mascot for the lab?
o k
Given the amount of posts I've seen online of people taking obscene amounts of debt for one of these, I don't think its just rich people
It’s a mix of maga dummies, Asians, and Indians in my city. Apparently those groups all just don’t care about buying a swasticar. I saw a Reddit thread the other day with the same observations across multiple other states so it’s not just a Texas thing
got a question here I need some of you to weigh in on, I'm getting deep into the Zigbee ecosystem but I'm noticing some of my devices have certain settings missing under ZHA, so is it worth making the jump to Zigbee2MQTT?
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re "just asking a question", you're asking for support. Head to https://discord.com/channels/330944238910963714/1284968640189304913 to help you find where you should post your question. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
#1284966617670881350 in your case.
was moreso asking for opinions rather than support, but point taken and duly noted
Getting in dept depreciating asset is crazy to me
🤷 technically I've had debt on my car with the lease contract
I personally wouldn't but each their own
Racks or raccs?
Living with as little debt as possible is nice
🤷 I'm at "as long as it's less than my assets"
Mainly because otherwise I couldn't justify my mortgage
Mortgage here too
A mortgage at a low interest rate is tax advantaged and gives you a place to live
Only
I wish I had the sub percent interest rates of a couple years ago
It was cheap money
Yea
I could have shaved another 1-1.5% off my rate, but I waited too long
Waiting is mainly a market thing here 
too cool for boxes are we?
this guy has been trying to type for like 6 hours
I am almost mortgage free :D
feels like spam for his domainname :P
he'll never get to third base with that logic
I'm almost halfway through mine
whois lookups arent fun anymore
I am happy for that btw
it just lets bad people hide
why?
I'm 10% Into mine...
But got another ~~33% from our "startup" exit
If whois didn't require physical addresses I wouldn't enable the blanking
i may or may not own a domain name that hasn’t got all the details in the whois because it’s that old
And sadly our corpa whois history tools now have big "confidential" warnings.
So I can't even use those anymore
wdym?
Big tech has some funky tools
But since the data is marked confidential, I'm not allowed to use them without an approved specific business case
Didn't have that yet couple years ago 🙁
Yea," our "database has history of some decades as well
i like my privacy
Who’s to say?
I was curious about what they were going to post. But they never ended typing.
-# So sad.
i wasn’t
We didn't deserve his pearls of wisdom
A blockchain of wisdom.
scam of wisdom
Good job!
I am not paying mine off faster than I need to, I can save more in electric with solar setup than I pay in interest, so I am diverting money there instead
I could have been 50% mortgage free, but will soon have free electric at least 6 months and have halved my heating bills, I call it a win 🙂
yep, that's the play
cheap money leaves money to be better used elsewhere, even just additional investments
Like trips to Southampton for more doormat stealing
Is that thing even rated for wet locations?
2
3
1
Lmao Nope
☝️ wisdom of the crowd
Digital products and services keep getting worse. In the new report Breaking Free: Pathways to a fair technological future, the Norwegian Consumer Council has delved into enshittification and how to resist it. The report shows how this phenomenon affects both consumers and society at large, but that it is possible to turn the tide.
Read more o...
<@&330946878646517761>
Gone
Discord can you pleaseeeeee stop marking stuff unread when spam is removed. I beg of you
T_T they only keep track of when something has been posted that you haven't seen, and not when an unread message is deleted
Huh, you weren't kidding, just scan and it's hooked up to z-wave. Well, I officially have my first z-wave device. Now to figure out what the hell I want to do with it.
Do you have alarmo setup?
Nope
Nope
Install alarmo it’s so nice
Do you have any door or window sensors?
Like the cheap aqara zigbee ones
I don't even have locks on all my doors.
I have them on all the doors
What about motion sensors
You can arm those when you leave the house unless you have pets lol
Yeah that motion sensor actually works well
I will soon have more motion sensors though.
I backed ten of these:
https://www.kickstarter.com/projects/linknlink/emotion-air-tiny-4-in-1-multi-sensor-powers-real-smart-home
I’m not a fan of any type of mmWave or potential high chatter device on low bandwidth mesh like zigbee but maybe they don’t spam the mesh and act like PIR motion sensors do
We'll find out. I will be using them on zigbee, I mostly want them as buttons and climate sensors though, motion was just a bonus.
Worst case if they're too chatty I'll roll out more Bluetooth proxies via a small pile of esp32s3.
It's the worst
I'm in the planning stage to dump cable TV whole house DVR go with go with HDHomeRun Flex 4K + Channels DVR. looking for feedback/advice
You should do it
Chnnels better than plex? .. I don't have any personally owned media and just want dvr and channel guide that wife wont kill because it's too janky/finicky/failure prone
Do you there chance somebody might create an HA app for the Channels Docker Image. My HA server 16G/N100 loafs at 6% CPU so I think I have plenty of bandwidth
Much better
Cool ... done
I run channels DVR on my NAS
If I had a NAS that's what I'd do
Tux was chillin today
Tux looks like a victim in a horror movie
Sending my boys over for a heist now!
Orange energy
He’s so happy and calm compared to him as a stray
Missouri's WHAT? https://www.dailymail.com/sciencetech/article-15760137/missouri-cooter-earthquake-new-madrid-zone.html
Portal to the upside down
Huh, I had an ex who called it that.....
Jokes aside, that's the new Madrid fault line. So it definitely could've been a LOT worse..
inb4 fracking
There wasn't fracking in the 1800s when 3 7+ scale quakes hit that fault line...
are we in the 1800s?
because I'm pretty sure we're a fairly dumb country that keeps doing things to poison/harm ourselves in the future
Maybe. It all depends on the timeframe.
I mean I think our train technology is still about 1800s-era
Wait you didn't know about the zone there?
St Louis building codes are to earthquake standards
Lol
Of course I know about the NM fault zone
I already referenced that knowledge several minutes ago.
Hell, an hour ago.
Whoops 😑 I didn't scroll too far back
And I just read the name of that town again
😑
someone clearly just set their local clocks to australian
<@&330946878646517761>
Crush his skull.
many images were destroyed
Oh no!
ok @last cedar I know raccoons are the GOAT and all but you gotta respect the humble owl for being fucking badass
There is a Channels HA addon https://github.com/mekenthompson/hass-addon-channels-dvr/blob/main/repository.yaml
Keep in mind that scanning for commercials and such can be processor intensive
I'm using 8 threads on my NAS and it still takes a while
does that run all the time even if you are not viewing or recording ?
My HA server is an N100 /16GB/ 2TB ssd/ GB Ethernet ant it loafs at 6%
If you select the option, it will detect commercials after it finishes recording, or it can start detecting while you're watching something
It periodically scans your local library to see if you added anything and downloads guide data every day or so
Otherwise it's mostly idle
They're leaning heavily into local media (while Plex is moving away), but you can choose to just have it be a dvr
It's a great app and service with great support
Plex: Soon with direct integration to Palantir! (probably.)
Yeah, screw those guys
I want DVR, and a cable-like channel lineup I don't have any media to load
It's an awesome DVR
the fuck is a commercial btw?
😛

A hazard of OTA
I am ... indeed I am, my first "computer" was 6502 with 4K of ram and a hand-pulled papertape reader
see, nailed it
nobody these days watches actual tv on actual channels but the older folks. 😛
how I ever considered commercials acceptable I dont know
"So we pay for this... and they're still shoving ads in our faces?"
I route anything with commercials through channels DVR , which removes them
update? nothing on the blog yet
About what?
A core release doesn't mean that it is automatically rolled out. It has to be declared stable first.
And it is on the blog.
should probably have a channel for masochists
who want more faster.
😛
you can call it the test lemmings
I only watch sports and few other things on broadcast TV and usually record and FF the commercials. Now Channels will do that. I have all the usual streaming services. I don't need Channels and HDHome run, it's something to play with now that I don't do 8-5 grind any more.
I don't have my HDHomeRun yet so I set up TV Everywhere on Channels to my current cable provider as a source to test and my CPU went from 6% to 16% while watching and recording
I use TVE along with ADBTuner + some Android TV boxes I already had + HDMI encoders with Channels for anything that isn't OTA
it's magical
So many options .... the rat hole is going to be deep
Jumping around in a recording is nearly instant
Will I be able to set up as a source the camera feeds from my Frigate setup?
I think it's going to be possible to set up an automation that will switch to my camera feed when somebody is detected in my yard. Would be too much for it to do PIP?
No, it won't if use Apple TV or android boxes
The rat hole keeps getting deeper 🤣
I 'm recording five streams and watching one live ... CPU only went to 20%
When I stopped glances cpu drops to 14%
Playing back recorded video and live video via the Channels Android app on a Chromecast...works perfectly. UI is nice. Channel guide works. Video is smooth. Works with my Sofabaton X2 without any changes. This was too easy....what did I miss?
I like it 😁
I secretly have a thing for possum, sugar gliders, otters, beavers, foxes, cats, dogs, chinchillas and owls, but don't tell the raccoons
I am going to be risky and ask a support question, just needs a simple yes or no.
|| Is a slzb-mr3 and slzb-mr3u the same thing? Can't find a 3u for sale in Sweden, pictures show 3 on the box, description says 3U ||
Is this the best discord server in the world ever?
YES, this is a support question 🙂
and an answer..
Their website is bloody awful and explains nothing
And this does not help:
SMLIGHT SLZB-06 – Zigbee 3.0 LAN Gateway med PoE - SLZB-06 (SMLIGHT). Smidig och kraftfull Zigbee-gateway för ditt smarta hem
SMLIGHT SLZB-06 är en avancerad Zigbee 3.
Picture of an MR3, for the same price as I paid for the MR3 from them, with it being described as an MR3U
they are the same, he typed before getting banned for support in water cooler..
packaging quirks
Sorry, can't read this, I am also banned now 🙁
No problem, didnt see nothing
guess we were lucky

Give a raccoon a stone and he can feed his family for a day
Give a raccoon a hammer and he can feed his family for a lifetime
How strange that this would come on spotify after you sent that gif
they're watching
(I don't listen for the grunting, as well as all the above mentioned cute animals I have a thing for some palm muted guitar)
Goodness me what’s going on with 2026.4.x. I’m having to reboot several times a day to fix runaway memory leaks. There’s no rhyme or reason to what’s causing them.
Ok.
gotta love the tariff fuckery.
tfw its cheaper to just sendcutsend it.. 🙃 probably..
I think thats also just a fact of trying to ship half a metre long 5KG product via express post
I should call her
I hate it when there is no flexibility in delivery companies
Last time UPS came they propped the delivery against my door so it all fell over when I opened it
Fucking wankers
And last time Schenker came with a pallet they just dumped it in the middle of my drive, 150kg of batteries
Fingers crossed for .5.1 I guess!
what happens when your country has the dumbest motherfucker in the world in charge and just pissing literally everyone off.. 😛
This could be a lot of places
But I think I know which one you specifically are thinking of 🤣
My latest "first world problem" I have a pallet of 36 solar panels stuck 30km away and they want to arrange delivery
And I will probably have to take time off work to accept it
But I have paid 200 euro delivery (from futher than 30km in total)
So I pay 2 days wages to deliever it, but must be in when they can be bothered to come by with it
Not, omg you paid a lot of money to get this to you, when would work for you
gon get the 4x plates probably.. next month to do the battery sammich
I might be entitled, I don't know, but you can't just come by with a 2 meter by 1.2 meter pallet that weighs over a ton without somw flexibility IMO
DC UPS? Tell me more
.. use 3d prints instead
using DC UPS instead of regular UPS to skip the AC Double conversion shit
Details!
24VDC UPS, DC-ATX supply for my new server.. and etc
Aha!
I have been wondering how to approach this when I get my solar setup actually
I was thinking if running a seperate inverter off the 48V bus to the server rack
well I got one of these for my small server..
Say a pheonix victron model, but it wouldn't be fantastically efficient
i'm aiming to have as few power bricks as possible
gonna just have a big 20a 24v rail to tap stuff off
This makes a lot of sense
then buck converters to step down most things
... still working on powering my unifi fiber gateway tho off it
will need a boost converter for that.. and its a weird voltage
I have a proper atx machine and some elitedesks and such
Are you going with all dc powered stuff with bricks and then deleting the bricks?
I was thinking of piping 48V to the rack and then running it off that, locally, some stuff will run on 19, some needs 48, some needs AC at the moment
no i'm using some phoenix contact industrial stuff
I am looking forward to some pictures when it is all done 😄
I believe supermicro has a 48V DC PSU for my 846 box, but I bet I couldn't afford one lol
different picture doing a preliminary fit
the bigger brick in green and silver is the PSU and the smaller is the DC UPS
because industry stuff.. is small when its just DC 😛
that was doing different stacks tho.. now they're mostly wrapped up into stacks of 6 with kapton and etc
for now tho I pass the fuck out.. then think more tomororw.. leaning towards just maybe 3d printing with some metal rods or alu channel pressed into things to provide more rigidity... I don't intend to be running these that hard anyways
https://batteryhookup.com/products/used-3-2v-20ah-64wh-lifepo4-prismatic-cells
Its a bunch of these..
-
Charge: 0.5–1C (10–20A) recommended
-
Discharge: 1C continuous (20A), with short bursts possibly higher
considering my UPS is only rated for 20a output..
and I am running.. 8S6P..
... yeah I don't think these cells are gonna be trying very hard
I probably could've gotten nicer if I could handle stud welding (too expensive) or laser welding (also too expensive) to access other batteries..
Very interesting project
The cells do need some compression though right, to stop swelling?
so I've heard from research
a few are already marginally puffed, but its more or less fine I think they've reshaped slightly after I compressed them and then wrapped em with tape.. 🤣
I could also.. probably.. just.. do two plates?
make 3d prints on the bottom for spacing and use the bottom of this stupid metal case as the plate for the other side
since I can install rivnuts into either.
Should be fine
its LFP not Lion so yeah 😛
I have seen people use wood for it
Lion should only be messed with at someone elses house 🤣
At someone elses house
it had to be plugged in while I worked on it
got to like 15-20% battery
after finished I took it out into the driveway and stabbed it to let the angry lithium out so it could be safely trashed.
Spicy pillows
for now tho. sleep.
maybe one day I'll be nuts with these.. 🤣
Fully charged - 3.65v
Fully Discharged - 2.5v
Max Continuous Charge - Up to 120a
Max Pulse Discharge - 400a
Short Circuit Protection - 5400a
but seeing as I wanted more density.. 20ah cells for 5$/ea on tax return I got 48x of em. xD
"Note: you will have to wrap these cells with shrink wrap or many people use the green barley paper for insulation. The cells are naked and the outer shell of the battery is all negative so you cannot put these in series touching each other. You need some sort of insulation between the cells to ensure they do not touch."
LOL
Doesn't sound at all dangerous haha
so at..
500w of load (lets be sane here I would be turning stuff off and going low power)
my pack will last.. about 5.47hrs
Info like that is why I got an off the shelf known good battery 😄
Dimensions of the cells are roughly 2" diameter and 8.75" tall and weight is roughly 3 lbs per cell.
Even if we ignore the use of inches instead of mm... What is with the "roughly" measurements? is the tolerance really that bad?
11 hours is lovely
no they're just a reseller whose already testing and categorizing cells and etc and probably going fast.
now if you want to have your server backup running literally forever-- https://batteryhookup.com/collections/more-featured-products/products/105kwh-lifepo4-catl-battery-with-outdoor-enclosure-free-shipping
This is an insane deal! Just $33/kWh with an outdoor enclosure. These batteries come with a full metal enclosure which measures 30" tall, 56" wide, and 28" deep. They are made with 189x CATL 3.2v 173ah Lifepo4 cells. These can be painted on, but most are either green or blue. These will ship on a pallet and the weight
🤣
(They're from some hilariously failed EV-truck startup.)
tho of course those also come in the spicy voltages of
"This can and will kill you; if you fuck about."
but for now sleep.
Enjoy! Goodnight
Should I buy the lego trex (the big boy)?
The cats would love yeeting it onto the floor
Will the cats be able to breathe in the case?
Oh wait
You meant put the lego in the case!
instructions unclear. cat burglar stuck in burglar-proof case.
One more to add to your list
https://www.worldanimalprotection.org/latest/blogs/pangolin-habitat-guide/
And platypus, porcupines, ant eaters and armadillos
Do they have a raccoon
Hi can i also ask for help here by any chance?
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re "just asking a question", you're asking for support. Head to https://discord.com/channels/330944238910963714/1284968640189304913 to help you find where you should post your question. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
Anyone can list things for sale 🙂
It's the buying that makes money, and there's no evidence of that there
Yep
Only if it is to do with raccoons
changed my plan.. now just two panels so almost half the cost.. 🤔
Up to you!
already done.. sent the order off
now just to make the spacers on the bottom to make sure the batteries stay centered anyways ontop of the rivnuts I have to install.
Oof no raccoons here posted it in #find-a-channel
🙁
Ok my HDHomeRun tuner arrived this morning and it's installed and working with Channels with little indoor antenna getting 57 channels
I put a small square flat antenna in my attic and get all the OTA channels I need with excellent signal
Yeah I'll be putting an antenna in the attic. I'll have to get somebody to run he cable; two-story and I'm too old to climb around inside attics any more. 🤣
reminds me I need to fix the ethernet stuff at the guy I work for's house..
the second spool arrived so its time to pull those new homeruns.. fun.. 🙃
cat6a shielded is comically thick
looks like they finalyl ran out of the cheap stuff. or whyever it was on sale.
https://www.monoprice.com/product?p_id=18608
414$
I got two for..
152.94$ each
I have no idea why they were on sale that hard
that is a lot of Ethernet cable
should be enough to do what I want
... probably wouldnt need as much if not for fucking unifi's insanity
who the actual fuck.. designs 1G SFP ports on a 48 port gigabit switch?
fully serious.
Whomst the fuck?
so running a few parallel runs for bonding them together on switches for a bigger pipe to the other side of the house and a bunch of cameras..
Hey Guys,
I found this on a reddit add. https://www.tommysense.com/
Looks like some ai scam to me, but I am curious.
Did anyone tried this, or experimented with wifi sensing in general?
TOMMY transforms ordinary Wi-Fi devices into motion and presence sensors that detect occupancy through walls and obstacles. Easy to install and integrates with Home Assistant or Matter.
intresting, my alarm was set too high then. Thanks,
We have no real insights, but the dev seems to be open for questions.
I would like to know if teabags get dizzy when you are stiring the water in a cup with the teabags in, do you think they will be able to help with that question?
Only one way to find out.
I made some halfassed attempts, nothing conclusive but I didn't dive too deep
in other news, vibecoded this DSP tool that sits before your system output so I can hear wtf people are saying on Zoom
What does that mean exactly?
It means people keep mumbling with lots of background noise and not that Teetow is getting older
<@&330946878646517761>
normally, it's up to audio device manufacturers (like Realtek) to put stuff like an EQ or a dynamic compressor in their drivers so you can, say, boost high frequencies to help my aging ears compensate for people sitting in bad rooms. I use my AirPods a lot with my Windows machine, and that comes with no DSP whatsoever... So I made my own.
Now we just need to solve the problem of two people in a meeting room talking at each other across the table when the microphone is at one end so no-one in the call can hear shit
get better meeting rooms
or just send out EU mandated headsets
what?
headsets get rid of a lot of common issues like room tone and the speaker cancellation stuff they have to do
I'm confused about the "EU mandated", not the headset bit
We are replacing over 200 Epos headsets because they suck and voice calls sound terrible. Doing my part lol
oh that was just a bit
I mean, I'd absolutely love it but it's probably not feasible in today's political climate 😶
Who could have thought these don't sound great
ok devil's advocate: did people somehow feel tempted to shove that mic right up their mouths, like they do in F1? I swear to god, every time they interview James Vowles I want to hurl things
it's not where the mic goes you %^#$%^
thank god. you're truly doing the lord's work here
eq apo with extra steps :P
yeah gonna do the APO now when my tokens refesh
I mean it's open source you can just go look at it
cheers peeps
Ngl after having used Poly branded headsets at work, I don't think I could take anything else in the future. They just work pretty damn well
Also having ANC on a work provided corded headset is pretty nice in the office
<@&330946878646517761>
New Beamer but his blinker doesn’t work
🌞 😂
That’s the factory standard configuration
yes the costs were negative today :D
Someone's losing their job, and probably their entire career... Just up the road from me an Amtrak passenger train clipped the back of a flatbed (not a semi truck, just a short flatbed truck) Totally preventable. Too many people still expect a slow freight train at this crossing, since for 20 years there hasn't been an Amtrak running through here, until about 7 or months ago.
Amtrak hits that crossing at 72mph. Freight trains are maybe going 40mph
do people just ignore the signals? o.0
Stopsign? What stopsign?
Yep.
Not a rural crossing, there's gates and lights, and people go "I can get through before the gates finish coming down I don't even see a train"
if I can't see the train, I assume i'ts an ICE coming in at 220km/h just around the corner 
the first 30 seconds :)
Exactly, but for 20+ years people got conditioned to expect a slow freight train here. Hurricane Katrina shut down the passenger route between Mobile and New Orleans, and it's only been back less than a year.
WTF
The lights and signals are there for a reason, I'm amazed anyone would ignore them
Lol if that happened in my state it'd be somebody with paper plates and no license who got hit, can't take muh job if it's that far under the table to start with
Drivers don't want to get stuck waiting for a long freight train
Well if they time it right, they'll never have to wait again!
But yeah, absolutely insane to go around crossings
This little area near me is particularly crazy because there's a traffic light just to the right of the tracks and a couple of cars can fit after the gate arm and before the light. You have to decide well ahead whether you can fit or not, and you can't back up if you don't 🙂
It's a busy intersection with a lot of traffic. Fortunately, they seem to time the traffic light with the train and it lets the intersection empty before the gate arms come down
But sometimes people end up stopped on the tracks with nowhere to go
This just looks like hell in general lol
Indeed. There are also four different lanes you can be in and you need to be in the correct one to prepare for quick turns right after the intersection. I hate driving through there
Why the hell would anyone allow this sort of design to be approved?
I get that people are stupid and shouldn't go onto the tracks if the light is red, but omg the design also has a big responsibility too
apple says just shut up and buy a mac.
I’m 3d printing a cake topper for my special needs neighbor. I also got balloons and got the fire dept to do a drive by with the trucks later
How many candles are you planning if the fire brigade has to come by?!
But being serious (not something I do often) that is a very kind and thoughtful gesture @hollow glacier
Now back to shitposting, just asked on another server and people couldn't help
Following on the back of the teabags getting dizzy question
|| Is it possible to control your bum so you can vary the sound of farts like you can with burp talking? || My friend wants to know
I just came to Andy’s frozen custard and they’re giving him a free Oreo and hot fudge frozen custard
And the lady at market street gave me extra free balloons 🎈
lol I’m not invited to the celebration it’s just their family
Wow it turned out so nice
Currently catmaxxing on my couch, with a cat asleep on my lap and another on my chest
Hell yeah!
This one says meow to yours
Can't easily take a pic, but I think I live on this couch now
Cats are the best, seriously
I would be miserable and alone without them
Now I am just miserable
This is the way
You know I was contemplating getting that lego trex?
Well I ended up ordering a metal garage, I hate it when that happens
aww what a cute kitten
And I should mention I say this as someone who lives near this intersection, affectionately referred to as The Crotch
https://maps.app.goo.gl/7zNUfmQhPyFSRGih7
Utterly adorable
😄
You should see her sister
By the way, I didn't know that you needed to have specific hardware to understand "good morning"
Or it is a secret wake word?
Awfully nice right angle intersection you’ve got there. Be a shame if an angled street happened to it
i am so confused
shelly has a new plug design
like why???
i mean like nice that they now do 3kw
but why is this not gen 4 with zigbee
the price is good tho, 10 bucks each
Warmboi
I'm having a problem with my "Domo-18 RF" device. Where can I describe the issue so someone can help me? Thanks.
tag me for responses
So floofy omg
#find-floof
#found-floof
#life-complete
My garagedoor opener is making klunky sounds and I do not like it
is it the opener.. or is it the piece of shit bearings on the track or the bearings driving the steel wires.. probably the latter two
for whaatever reason.. a lot of garage door related stuff seems to go
"lmao sure lets use not-sealed bearings and underlubricate em."
its snagging on something in on the rail, it hasn't done this before. It started doing this after it has been serviced
that sounds like one of the idler things that rides in the rail is no longer running properly square.
Ie: the open bearing that isnt lubricated is utterly fucked probably.
And whats "serviced"? 🤣
if serviced isn't.. "and replaced bad bearings" then its likely the problem
what happens when bearings aren't replaced in a timely manner.
Except its not just bearings its the whole piece of shit pulley usually.
because they're open "bearings" that are dogshit because they dont retain lubrication
Oh no the opener got installed by the guy but the emergency release lock from the outside was broken and got replaced under warrenty
I'll give them a ring tomorrow
emergency release... from the outside? 🤔
yes. If the thing breaks or the power is out I do need to get inside the garage :D
I'll check but I think not. the door isn't that old
you can test by pressing on them from the side to see if they wobble at all in the direction that they aren't supposed to spin.
inb4 replace them with those nylon wheels
tbh it could also be the hinges now that I think of it
Imho roller doors are the best quality of life upgrade in this area.
Opener lives on the end of the drum so no annoying overhead tracks. Springs live inside the drum so retain containment in the event of failure. No pulleys, no ropes, no hinges, only two bearings.
this not a drum door its one of those doors that live at the roof when opened
though a drum would be safer when it fails
We call those a "sectional" door here
that is indeed what it is
(Assuming it's the kind that's in a bunch of horizontal panels, just "tilt" door otherwise)
yes it is
the door is like a year old so I am just mildy anoyed lol
oh sweet I can pick up the nylon wheels local
Windows powertoys sounds like something sold by ||EasyToys|| change my mind
even safer would be a perfectly balanced one with the.. torsion spring
where the door ends up being effectively no weight..
mmmm kinetic energy
😛
sunk cost falacy. I'll be sure to name you in my will though
if I really cared I could enclose the spring but 🤷♂️
I mean the regular extension spring ones are basically zero danger
as they tend to have a safety wire that goes in the center of the spring so if it were to be loosed it could go nowhere
torsion spring ones.. bit more dangerous yes obviously.. 😛
I have the boring safe springs I guess
I am really rather new to owning my own door lol
and it shows
for something so dangerous, there surely is an absolute lack of gefingerpoken und mittengrabben covers
its really only dangerous while you are working on it
or if the wall bolts failed catastrophically maybe.
knowing my rotten luck
just make it ai powered so it knows when not to fail
I can't wait for the bubble to burst.
its gonna be so funny
aside from the 2008-but-much-worse part.
i will so buy memory then
if you are able to use it, if you mean execution sale of DC hardware
... yeah except nobody will be able to do it
:(
because all of the ai shit is so hilariously specialized
I am still naive enough that someone in China will reverse engineer it so we are able to use it
this is where I'd put my GPU if I were to be able to afford one
As well as being specialised equipment, a lot of it isn't even standard-sized servers.
As well as some of them building whole-ass custom server designs, a sizeable chunk of what's left is going to be ORv3 rather than 19", which you can't just drop into any old datacentre even if you could find another purpose for it
this is such a hatecrime towards mother nature
you can.
On the hardware made for it
except have fun powering it.. last time I saw some LTT-or-such walkthrough of a datacenter I saw
** a lot**
of bus-bar tied server shit
which requires like.. 48VDC inputs and etc instead of standard power supplies to start among other things
I mean all the DC hardware I have stolen all work with some form of ATX powersupplies
from the modern slop era?
the slop era where they are shoving fucking 1U servers full of slop generating hardware that you need special watercooling loops to even have a chance at cooling?
exactly.
the modern hardware is nothing like what was used in the past as far as friendliness to home users
Our ORv3 servers at work (which don't even have GPUs) have 36x 5500W 48V PSUs per rack
8 x Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz (1 Socket
its ancient
https://www.youtube.com/watch?v=da9GwXX-0Zs
Look at this shit
Well this is exciting! Here's a 3kW SMPS featuring interleaved totem-pole PFC using gallium nitride power stages and a phase-shifted full bridge (PSFB) with silicon carbide MOSFETs.
Support me through Patreon for more cool projects:
https://patreon.com/ElectrArc240
What happens when:
0:00 Introduction
0:10 What is this?
1:21 Performance compa...
thats not even the latest gen I dont think
since thats still 12v not 48v
but again.. fucking watercooling the power supplies themselves
fever dream
and realistically.. probably not even that much given how high efficiency a platinum supply is these days
so; still nutty
So its fancy ewaste
well thats an intel thing so yeah.. 😛
🤣
everyone knows theyre leaning towards ARM or AMD these days.
Since y'know.. cpus that don't shit themselves.
96.5% (measured / real-world, not just rating), for the ones we have.
They had to invent a whole new 80+ category ("ruby") because the titanium rating wouldn't adequately cover it
no. 😛
And still would make a sick truenas box for a homelabber!
it’s been doing that for a while now!
found the culprit; there is an emergency lock on the outside for the release. The rubber gasket is catching on the rail just ever so slightly
nothing i can fix
Cat7 for complete house, what a *** cable to run.. stiff as hell .
In cellar i was reversing my back into some iron rod and got need of 7 stitches in my back. But hey, it's cat7...
cat7 isn’t a real standard so it might not be up to cat6 standards, make sure you test it
The standard after cat6a is cat8
Confirm, but does the job nicely so far.
It was a marketing gimmick by cable manufacturers who wanted to advertise something as better than cat 6a when cat8 wasn’t standardized yet, but as a result there’s a lot of cat7 labeled stuff out there no better than cat5e
It’s a mixed bag, basically
Only 1gb here, but old 5e cables began to disolve 🙂
If you have some spare cable you should be able to cut a cross section to confirm it’s not cca at least
Cat7 sucks to mess with
dont mess with the cat
7 is too many cats
Imagine how many robots you’d need in your house!
1 or 20
1 if its good at everything 20 if you need 1 per task
Hehe
boop
Re: Channels and HDHomeRun. Running a cable to my attic for antenna was going to be complicated $$. I decided to try using a TP-Link RE615X WiFi extender located in my attic. It has a 1 GB Ethernet port as well and being a WiFi extender. Works like champ. 9 ms latency using MultiPing on Desk-Top (via WiFi) -> Router -> Extender-> HDHomeRun and 400 Mbs throughput to the internet. My cheap-ass little antenna working great
Should probably be fine. My HDHomerun is just FE and not GigE
HDHomeRun + Channels + GoogleTV (that already had) -> U-Verse getting cancelled after a week to make sure it's solid. Total cost $260. I break even in one month!
ChannelsDVR is an awesome aggregator of different sources
You should have had to use the original 1/2 inch thick yellow coax Ethernet with transceiver taps .. .quit bitchin' 🤣
thicknet
i hate how to make dashboards look good i gotta find custom cards
but they never match
just override all the css and fix that. /s
😭
That's my strategy. I invariably dislike something about a card and then end up applying some sort of card_mod to all my cards
Fortunately, that's usually fairly straightforward in a YAML dashboard using YAML anchors
it's horrible with a UI-managed dashboard
you can just call it aero glass
we can all fantasize about the better times of windows. /s
Lol it's mean to mimic the liquid glass of ios
but HA just doesnt support the same rendering that apple does
the thing windows did like a decade ago yes*?
precisely 
just like the macbook neo thing
someone at apple must've had a stroke and finally realized
"Wait, affordable PC's that can get into everyones hands is a good way to get market share!"
they selling out now lmao
bad choice using discontinued chips
yeah because again they didn't even slightly consider it as a product
they considered it as
I think that Aero was more of just a blurring effect vs. the weird distortion thing that Liquid Glass does
😭
the whole thing was lowk a frankenstein laptop
yeah i dont think most pcs at the time supported the gpu accelerated thing that apples doing rn
and had they prepped better they'd be literally the only sub-1k laptop selling right now
please stop presuming that literally everything apple does is some high tier magical bullshit. 🙃
fair lol
most of it is marketing hype tbh
to fairly dumb cultists for the most part.
but again.. its a group who accepts a laptop that doesn't even vaguely attempt to cool itself
😛
i dont think they knew how popular this would be to broke college students etc
they couldnt risk mass production for a new product line it seems
and yet they could risk the dumbest fucking device on the planet that was the apple VR thing
😛
The tagline for that thing should've been.
"Eat shit, Poors."
I want to know what the percentage return rate is on those
Shouldn't need the entire 30 days of the free return window to realise how useless it is
Back on my design bullshit. I haven't shown @lone dagger yet so it'll be a surprise to her too.
wat
wat
I like sharing with y'all here instead of the subreddit. Those folx do not care for fun.
What are you doing to my precious?
You have demolished the brand. Banned.
😂
the lion the witch and the audacity of that.... hitch?
my dumb hr rep at my dumb company sent me a dumb email saying im at the PTO cap and i gotta take a dumb vacation for my dumb work life balance or something
little do they know i'm just gonna spend the whole time messing with my dashboard
Get that shit used up or paid out, employers don't give a fuck about us
PTO is not a request but a notice 
PTO expiring is the weirdest part of that sentence to me
Like what you don't just have it keep building like how its meant to
Then get forced to take a holiday if you build up too much
PTO builds up for a set amount and afterwards is dropped, sometimes they'll drop on year end of you haven't used it, sometimes it's just a set amount that it's not allowed to accumulate over
But yeah like everyone said, why aren't you taking vacations
Arm and hammer slide litter works very well with the LR
Mine doesn't roll over. Use it or lose it
We can carry forward up to 40 hours
I try not to collect too much PTO in the first place though
I don't think my sick time expires and I can carry some PTO
Sometimes you can collect your PTO as direct pay. Might be worth reading your employee contract/handbook to see if that's an option.
I just need to take it
I mean, that works too
In my experience, that usually comes as a take one day, cash out one day kind of arrangement. In my current company, it's also limited to certain times of the year
i’ve never not used all my time off 🧐
COMMIE! SOCIALIST! /s
our beach holiday
I roll over time but it all gets used eventually, save up for years with more travel
Alright. Who keeps breaking the server? 
DID I KILL THE HOME ASSISTANT DISCORD SERVER
no, i did.
i clicked it and it died. must be me
Omg, this user called Fish just killed the HA discord!
If we are quick we can ask support questions here before mods come back and ban us all
❕
And then we couldn't come back to give more shit to the people breaking this server.
Dammit Missy, why'd you break the server?
Wasn't me this time
So I didn't have to work the rest of the day, duh.
Lazy
We can start trouble elsewhere, if you like.
You even took down another server with HA.
I'll ignore those spaces, too. If Discord is down, my entire day is shot.
Like when Teams goes down for Enterprises.
"Guess I can't get anything done today!"
fingers crossed that happens. I'd love it
This is great, took the internet offline to pull off the biggest raccoon heist ever
I mean, what a shame discord was down
Is Steve on the loose again?
