#the-water-cooler
1 messages · Page 282 of 1
I built a beefy work computer in the dark days and had no choice other than RGB for the amount of ram I needed (paired kit because I’d had too many problems with trying to use random packs). If I turned off the rgb in windows, booting into Linux caused massive glitches in the color 🫠
Ultimately had to leave the stupid thing on
I want to go the other way. See if I can automate the lights based on the PC.
Turn on the video light (one of those Elgato panel things) when the webcam is in use.
But do you stick with classic BSOD blue, or turn off all the lights with new black screen of death?
Does it have a proper flame jet for the top tier though?
10Hz max brightness red flashing
And a big 'ol klaxon
I think it’s a little excessive to trigger every time Teams crashes
the answer is 'don't be a savage and get a bidet'
I don't think that shop sells bidets though
Although your could be right
Is this also an acceptable way?
if a cat does that it's almost always cause it has worms.. keep that in mind before you laugh
sometimes it's dried poop on it's butt tho
If a human does it, it might be because they bought ice cream though, right? Asking for a friend
circle right back to poop on the butt.. just wetter poop
This video shows a beautiful "staircase" being "restoration" to its former glory. Watch as the old "hardwood stairs" are brought back to life. The work is a great example of "hardwood flooring" and attention to detail.
Order best affordable 16-lines laser level with a free US delivery:
https://bit.ly/46VvErG
Follow us:
Instagram: https://www.i...
I had a power outage yesterday and when they were trying to restore it pulsed several times— fried two of my wired smart switches 🥲
You clearly need a whole house UPS (so that can be fried instead)
I do need that honestly
is just waiting for the next PV+storage subsidies
build of from vapes
anyone here use node red for automations? specifically on a normal docker install of HA rather than supervised
Here it is cheaper to DIY with 48V batteries than to get a company in to do the job, with the subsidies
you only need a place to put it
Need direction on what channel I can post to for help with my HA. Getting an Error when I load HA.
you must be some AI
I don't wanna get
insurance
I mean you can get certified batteries
the DIY with anything more than 60V or a reasonable number of As is the issue. not the individual parts
also, if I get some contractor to put PV on the roof and wire everything up, might as well have them do the storage
the island operation is a bit tricky here either way
yup
I will be buying a thermal camera and torque wrench with the money saved, undersizing fuses and oversizing cables
All will go in its own firecell
I am one of the most responsible raccoons around
Also...
Don't drill into big sprinkler pipes
More pics to follow later
or whole-house surge suppressor.
We were vaccuming water out of the walls
Honestly not sure if that would have helped here
as an american my response is
Lots are just to clamp anything over 800V to ground, which probably isn't what happened here
but yes big sprinkler pipes angry
They were drilling from above
much PSI in mains-fed-water
Not sure if they got told wrong or the plans don't line up
This is a medical facility, at least 200k m2 so I would imagine there will be at least 30K liters on site and pumps too
Could have been a disaster (even larger)
Actually, we are in the new 45k m2 part, so my 200k is probably way off
Hey all little bit confused as to where to post a problem. If you could direct me that would be great. Or if there's anyone that can help me out personally I would be forever grateful.
I'm having an issue where my voice assistant will not turn on certain lights because it can't " find them" as an entity. Even though I can clearly see it is an entity and it's entity ID is exactly what I'm calling it. I have changed the name from cabinet lights to counter lights but I insured. I updated the ID.
Is there anyone that can help me out? It's becoming a little frustrating. I forgot to mention that they are enabled and they are exposed to my voice assistant.
#1284966915055288530 might be able to help.
Thank you. For some reason I couldn't see that channel until you sent me that. Posted my question in there. I appreciate it.
Not a problem, just a vibe. Any suggestions on migrating from HAOS to the Docker Container? I'm thinking I just grab a backup and see what survives the transition.
just copy your config folder
Of course, I forgot that existed
obviously addons don't transition so you'll lose and have to redo any of that stuff
This is a #1284966540617449515 question
That sounds amazing, ngl
You mean a configuration vibe, right? 😉
losing and redoing sounds amazing?
When you do it better, sure
No, the fact that so little is lost
Fix mistakes of the past
blows your mind that all of the years of anger and frustration and hard work is summed up into a single folder that isn't even that picky where it resides? lol
Not exactly what I said, but you can roll with that if you like!
Translation: You know where to stick that folder
I'm playing around with solar and kinda wish I could just import PVWatts simulation results from NREL SAM instead of having to use Forecast.Solar (which is giving my vastly incorrect simulation results)
Are there any other integrations available?
Eat it raw.
Oh my.. pricey. But might be my solution for when we get a cat
hmmm
it's true
You can test drive it yourself
I was going to ask, do you use it yourself
Stick a child in there, good to go for the day
there is probably an southpark episode featuring this
I mean, might as well! My toilet is not worth 1k$ for sure xD
Cat is gonna be taking fancier poops than me 🥲
what the f are they 1k?
It costs to have poo taken care of
You can get one of the fancy Japanese toilets.
yea not 600 💀
My kid takes care of it, I maybe would pay when he moves out 🤣
there is no better japanese toilet gif :(
One of my friends go tone of these at costco
loves it
paid like 2k canadian
Heats the eat.
Warm dyson dryer
You could have 2 cat litter boxes for that price
The dream
You could have one for you and one for the cat
One for you, one for the Cat.
I'm 6 feet tall and 240 pounds, I doubt i fit in one of those
Not with that attitude
I want the full experience
Now you too can experience the true pleasure of a Japanese toilet and imagine what it's like to live like a Kennedy for 10 minutes thanks to this Relaxing Japanese Toilet Music from South Park for 10 minutes - 高価なうんち機 video.
15:47 (Well, just before.) 06-03-2023 103
You must use the toilet a lot
Now I understand why you want the full experience
ugh bought a "smart" ball for the cats and the thing really only ever vibrated and hardly moved so sent an email to the company saying it was the worst cat product I ever bought. didn't even ask for a refund or a replacement yet they sent me a replacement anyways and the replacement does the same damn thing
Are you sure, you bought a cat toy?
wrong kind of "cat" you thinking?
Not the forbidden rainbow wires.
looks exactly like the ones I see down at the end of my barrel after pulling the trigger
Shooting your BB gun at the traditional target of tin cans seems less wasteful than coffee mugs, but ok
coffee mugs.. yea that's it
Anyone using a smart bedroom door lock for an office that's set up in home assistant as well
is there such a thing?
I know there's different thumb print ones. I know Reed recommends the GeekSmart brand that's 60 but doesn't integrate so I was curious if anyone here has done anything.
#1284966353798697001 with the "Recommendation" tag would be the right channel.
And yes there are a bunch of smart looks that are latch only (no deadbolt)
and we don't want to know what you're doing in the bedroom, or the...office 🙂
just out of order
which is weird
time stamps etc look correct
oh i see
nm
I skipped right over the FL timestamp lol
Thanks to BambuLab for sponsoring today's video! You can check out the X1C and their other stellar printer's using my link: http://shrsl.com/2mcez-2yn7-1cwx9 (Affiliate Link) #bambulab #bambulabX1C
Anh Dang's Socials:
Twitter - https://x.com/anhdangerous
Bluesky - https://bsky.app/profile/anhdangerous.bsky.social
Artstation - https://www.arts...
QF's gonna try to cook that
I don't love this at all
okay I need to go to bed, but reverse-engineering Zigbee stuff is so fun lol: https://github.com/Koenkk/zigbee2mqtt/discussions/29343
would you go in a wooden skyscraper? https://youtu.be/-pXTAI5ZAdc?si=09dVxDAq_69nZhPG
You wouldn't know it by it unassuming exterior in a nondescript corporate office building, but InventWood is creating a product that can revolutionize the entire building industry.
They're calling it "superwood", a material that maintains 100% wood composition while achieving up to 10 times the strength of steel at just one-sixth of its weigh...
Why not? In Asia they are using giant scaffolds made of bamboo.
scaffolds is a little diffrent
I just want to say a massive thank you to @midnight verge for their constant effort on the Alexa Devices integration over the past several months.
Amazon have made constant changes to their API which has made the integration fail on average once a month. Simone has rolled with the punches and dropped updates as quickly as they can be deployed. Last month he even went so far as to push a patch to HACS to get people back up and running while waiting for the next milestone release.
This is the effort that open source projects are built on and this integration makes an enormous impact on my life as well as many other users. (He also graciously puts up with the stream of “same here” comments on GitHub!)
Thank you Simone!
I've probably been in sketchier tree-houses as a kid already 😛
Bad news. The raccoon didn’t make it…
Well, it's not going to survive without the flowers
#the-water-cooler message
hello people, if i have a suggestion for modification for an integration, is there a good way to reach out for it to be seen, on maybe github etc?
Feature requests: https://github.com/orgs/home-assistant/discussions
And PRs go to the HA core repository on GitHub.
Lol facebook add. Home assistant sanitary guide. 36 euro 50% discount. Does it also work when you lost your mind before home assistant?
Uh what
A facebook add for a written home assistant guide
ew facebook
Did you give your AI to much free will? Seriously though its probably AI Slop
no i aligned my AI with a moral. free will is kinda not my thing because im religous
bloody freewill got us in this mess
<@&330946878646517761> We got a live one
he gone

Danke schön
Starting smart config pairing procedure
Waiting for the device to install the intermediate firmware
Put device in EZ config mode (blinking fast)
Sending SSID vtrust-flash
Sending wifiPassword
Sending token 00000000
Sending secret 0101
................
SmartConfig complete.
Resending SmartConfig Packets
................................
IoT-device is online with ip 10.42.42.42
Fetching firmware backup

I've found 3 table lamps that I want to get E12 bulbs for, but am getting stuck. I want to be able to at least dim/turn off by wifi/google home.
any suggestions from folks here?
#1284966353798697001 for recommendations
Why would I want the yellow home assistant instead of the green? What I see is that it's "better" somehow, but I can't find anything specific from my quick searches
Hm. Well I'm about to set up a Raspberry Pi with home assistant. I guess the zigbee support was what yellow had that blue didn't. I'll have to figure out how to do that with the pi
Zigbee dongle, but use a mini pc instead of a pi if you don’t already have the pi. Also, #1284966353798697001
is your opinion
|| stop trying to steer people from the almighty pi ||
Why?
Mini PC will run circles around a Pi and are usually cheaper nowadays than a decent Pi + are more multi-purpose.. but yes make a post in the hardware channel
"usually cheaper" is becoming a very wrong statement in terms of cost to performance lately
A pi 5 is $85 on sale, normally $100. You can get an i5-6500T Mini PC for around $50-70 shipped and ready to go. You can get an i5-8500T Mini PC for around $100 shipped- both have almost double the performance of a Pi and aren't restricted to ARM compatible software.
The Pi may draw slightly less power but many of the mini PCs max out at around 35 watts with much lower idle usage
the pi costs more money via nickel and dongling
if you wanna go poverty mode you can get J5005 thin clients under $40 total
Anyone remember buying $5 Zero W boards from Microcenter?
the boards were slow as balls but it was cheap as hell
they all had h.264 decoding though so you can slave any of them to the USB service port of a tv and put something on the screen
Found one of them recently. What to do with it in 2025?
where tell you get these?
don't say used ebay lol
very limited things.. because a zeroW is.. borderline unusable for anything serious
zero2w is the one thats semi useful.. 🤷♂️
(because its just a chopped down Pi3)
Yes used on eBay
Those computers are from 10 years ago, of course they’re not gonna be available new
this is your warning; you're engaging the local braindead conservative boomer.
🙃 it'll get circular real fast..
Disengaging. lol.
the only downside of those pcs is.. some can just be like
"Wow they used to use this shit for serious things?"
levels of performance.
I got one of those a while back for something.. turned out to be a fucking dual core amd thing
like..what cocaine was smoked when that was usable... 😛
Some people only need a web browser to do their job and one monitor.
sir even these days a browser can be comically heavy... 😛
Good thing the current gen chips can hang with current gen requirements, I guess.
No fat shaming of browsers!
I mean we went to the moon on less per than a TI-83
It’s all relative to the workload at hand.
Now
with artisinal memory*
yeah; ASUS still sucks severe ass at making software
Oh this wasn’t asus software. It’s a skins for some dogshit KDE
The backwoods folks in my little Louisiana town returned so many of these
that still count as their software when they slap it together for their hardwaare.
Despite us telling them that it’s now windows
they tried to chromebook before chromebooking.
which would've worked.
if there was actual effort put into it
lol. The google CR-48 wasn’t even a twinkle in anyone’s eyes yet.
This was still early vista days.
im aware.. just saying
its rather similar. just ASUS never actually like.. properly stands behind software well enough for it toe ver matter.. 😄
Meh. I can’t remember a time I was reliant on an Asus piece of software tbh.
Maybe a driver CD or something
But I never used those anyway. Straight from manufacturer site
heh I see infinite found a newbie to talk to. always so nice not see him so alone
so dreading redoing my dashboard so I can fit more stuff in
I admire the Apollo Guidance Computer.
Built for a specific purpose, incredibly reliable and robust.
༼ つ ◕ _◕ ༽つ
RETURN TO RISC
༼ つ ◕ _◕ ༽つ
it's in verison 5 by now
I just mean in a general sense. Not the RISC ™️ Platform
looking for some c9 christmas light clips and ran across this video. can't help but wonder if putting these clips on the lights made this person's hands as chapped as they are
those bulb christmas lights suck so bad
first time i’ve actually just thrown them out because the would not stop getting all tangled up
it's bugging me way more than it should that they used black filament with white lights
56 bucks for christmas light clips.. oof
Clips? What happened to permanent lights?
Everlights were the only one that I would have "liked" the look of but they are the most expensive and probably the hardest to replace any dead lights. cost to what I would get did not add up
puck lights look dumb as hell to me
the lights I did buy were the same as what I had but just contractor grade so that I can replace the bulbs etc
sucks but at least they are cut to length and if push comes to shove I can just pay someone to put them up lol
So you looking for everlights at aliexpess rates?
4k for lights installed is insane
You could always go with legacy candles
if I had a boom truck I could do it myself for far cheaper and would.. but I don't
Rent it. Go herc
well another issue. don't think you can self install everlights
some you can buy the parts to do it diy but those not so sure
You can self install anything, just need the right hammer 😀
Rent a boom and DIY.
awfully big words from someone who would never do that themselves lol
I do operate the boom.
from the ground don't count
I actually have my lift operator cert. Lol
would make sense but not sure why a camera mounted to a boom needs one of those lol
seems like this is a job for a drone
the BT stuff needs device profiles to work?
I never messed with any of that before
I assumed if you got a device to pair with the proxy it just sent the raw data like anything else it would to an app
need a christmas light with hot pepper baked into the wire insulation
damn squirrels always chewing through them
You know why they love chewing on those wires so much? A good portion of the insulation anymore is soy-based.
Animals love it
so what.. the aluminum gutters they also chew on makes for a more rounded nutritious breakfast?
I guess that's what #find-a-channel is for. I'll go ask there.
yea only talking trees in here https://youtu.be/ks97dIzAFBA?si=Q4p_rI_ervVq0HK-
The clip is from "LotR: The Two Towers".
AI in Space.. space.. space.. space.
https://youtu.be/44xJ8RQGp5k?si=ZJ3QRG3xrC5N1qEz
Nvidia-backed startup Starcloud is working to create data centers in space. NBC News' Gadi Schwartz talks to CEO of Starcloud Philip Johnston about the company's mission and how it will work.
For more context and news coverage of the most important stories of our day, click here: https://www.nbcnews.com
» Subscribe to NBC News: http://nbcne...
ngl I would chew it too
I could chew on those
Im in a atlas i3 facebook group its getting better and better
Hi I'm Astrum
Hello
atlas is that meteorite rite?
Yeah
That nasa is in a shutdown only makes it more interesting
That's why I said that :P iirc he always starts his vids like that
Might as well go Ducati then
nah those will break
The shutdown only affects civil servants, not contractors though
Though this looks like astrophysics, so the civies aren't accepted and are probably furloughed
Human spaceflight civvies are all still working without pay basically
a shutdown seems bizarre to me tbh
the shutdown is not bizarre. the people who cause the shutdown still being paid normally is bizarre
it’s a personal opinion, not a statement of fact
Well don't most civilized countries just kick out the ruling party if they get to that shutdown phase and replace them?
you mean riot?
well most have some type of legislation that prevents this
Nah, though that works too, but a legal framework to vote in all new folks and get rid of the idiots who screwed it up
other than that we tend to eat our PM
yet to see another country solve such issues without rioting
what other developed country has had an similair shutdown?
similiar? well the only other country that could even compare scale wise would be maybe russia
Exactly
It's why I called them civilized
not talking about scale :P
Lol
I think it plays its role
No
of course you say no lol
curious how many people are involved wit our government vs yours
wat was tat line in te avengers movie.. 100 people in a room gets noting done unless you need to move a piano lol
but then again you need to be a developed nation
or just tiny
cause like so many foreigners you just want to believe wat you want regardless of diffrence of opinion lol
Then what do you do with over 300 people in a room?
the wave
No. You are just unfathomably difficult to have a conversation with because you have no concept of the world outside of the US
but that is a rude thing to say
try 800 
first time my H key gone out. it's usually like the o key or a
you are talking ABOUT the US
the irony
Yes, and other developed nations.
all which are not similiar by any scale
The fact that no other country has issues to this extend makes me believe there is actually a solution
🤷♂️
linking to a satire news outlet really proves your point
I'll probably shut up now before this goes unfriendly lol
that would be wise, especially with the "proof" you are offering up lol
Dang you shouldn't insult the onion, it's way too true these days
I do not envy their job
I'm sure they're more depressed than ever seeing that news headlines sound like onion articles
I mean weren't the guys behind south park also not complaining that reality is more absurd so writing episodes is just not possible anymore
I mean reading the news just makes me want to cry
I'd probably crash out
welcome
Inb4 crypto spam
this really a bot?
close
just how complex is this shit gonna get
blockchain is close enough
I would so hate to be young in this era
Hey blockchain has a use case, they're just still trying to find it
Just like quantum computing and ai
They all have the same use case- using up all the electricity
No the use case is taking money from VC and lighting it on fire
Ai logos are all buttholes
just like CEOs?
@tidal bronze only in LA https://youtu.be/DoPVj0fUTu4?si=30X3NoH52tYWgkUx
A 79-year-old landlord shot and killed a naked intruder after being body-slammed by the assailant at a Studio City apartment, authorities said. Full story: https://abc7.com/post/landlord-shoots-kills-naked-intruder-body-slammed-north-hollywood-apartment-lapd/18126262/
Taking a page from the Texas book of shooting first
Shoot first, and heliopter later? @peak slate
Only if it's the helicopters with birds of prey painted on them
Not the secret police helicopters
Not penis heliopters then?
lol coming full circle
Target employees will now be required to smile and engage with customers that come within 10 feet.
used to be people would do that normally without needing rules to force it, then it stopped and now it's being restarted but forced lol
Being insufferable is company policy? 😮
self checkout 🥰🥰
I wish American's didn't insist on talking to customers at every moment...
hey how are you?!
🙈💀
i had to explain to my dad that they do not give a flying f about your day and it’s just to be “nice” l
lol
just treat it as empty words with a set call and response pattern^^
yep
it was cute tho. dad took it seriously and chatted about his day to a mentally absent starbucks worker 🙈
anti social
besides have you been to america lately? we don't talk at all anymore lol
in October I think? I'd have to check the calendar for the specific date
yea, it is quite weird antisocial behavior in your service industry
didn't use to be like that
there are still some pockets of nice places
but most places just packed with anti social grumpy people
brits would feel at home here
i don’t care about being overly welcome i just want good service ;-;
that's why I avoid the US 😂
I liked the other scammer more

i have a name
Context - so valuable 
USPS is the woooooooooooooorst
now that's something I haven't seen before lol
shit's broke yo
or bubbles.
"package? What package? Drop off location? nah go go f yourself" - PostNL
😄
Are.. are those ducks?
it's ok they have a number you can call
well they dont actually answer the number nor does this number take a reference id, but damn if the number doesnt exist
Ah, the classic game of goose goose DUCK
It's like something right out of The Simpsons
It’s like one final f u by de joy
At least they admitted fault here.. if they mark it delivered it doesn’t matter what I say they won’t pay out on a claim
Even if my customer has video proof a mail vehicle never entered the street with cameras lmao
I have to imagine small businesses can’t absorb this kind of cost regularly
What the fruck did minisforum do now
did they lock down HDDs to their own brand?
MS-R1 is powered by the CIX CP8180, a brand-new ARM chip from a newcomer aiming to push ARM performance and expandability closer to x86 levels. With 12 cores / 12 threads at 2.6GHz, 28W TDP, and 45 TOPS compute including 28.8 TOPS NPU, it brings a different kind of challenge — and a new playground to explore what’s next in ARM computing.
Neat. Desktop ARM boxes
they are cooking lately
indeed, that's the wrong number of TB
There's a Jeff Geerling video if you want an early look at it
Beautiful weather, possibilities are endless
Seems like the firmware could use some work
Jellyfin client is only garbage on severely restricted OSes, like tvOS. And then only because it runs out of RAM and crashes because tvOS is garbage.
well its not doing what those OS's want
you want ram? you give us those juicy personal details and information to track!
Oh yeah, the client is way better than the web app. I'm not sure why, it just is.
The main issues I have with the web app is that subtitles often end up out of sync with the video+audio and skipping around can result in the buffered video having "holes" in it.
Seems like you should buy a shield tv
Like dying in the cold
Fuuuuuuck no
Android tv best tv
ughhh my home assistant went from snappy to practically unresponsive today idk what's going on

Okay so I'm way too excited about the dumbest thing and I have to share. I had to open up my laptop because I heard something tiny rattling around inside (a clip for the bottom cover broke off as I suspected). While I was in there I realized I pulled the WiFi 6 wireless card from the new server I just bought (to put in a Coral), so I replaced my laptop's WiFi 5 card with the one from the server and now I'm happy lol
not in the UK - https://www.youtube.com/watch?v=E9PSg0sQyfs 🙂
David Mitchell, Alan Davies and Phill Jupitus on customer service in the UK.
So is it +1 better?
1 weefee better
I sure hope by the end of this year I have all the kinks ironed out of my complex holiday automation
does anyone have an USB-C dock/hub that supports 4k120 or 60hz for mac?
I have one but that only supports 30 lol
Look for something thunderbolt 3/4 to get the bandwidth for that.
My Zigbee motion sensors work, but everything is delayed
Sad, it looks like I'll have to run 2 cables
Most C to HDMI is capped at 30
I don’t know that I pay much attention to the frequency, so I’ll check tomorrow when in my office. But at home I had issues when logged into my work’s Citrix desktop with major lag at times. I was using an anker USB-C to hdmi. Home was the only place that saw this issue. At work I have an even bigger monitor and it was fine when connected to my Citrix desktop, with the monitor connected over hdmi from a Caldigit thunderbolt 3 dock. Solve at home by moving to a ugreen thunderbolt 4 dock.
<@&330946878646517761>
Done!
That thunderbolt dock is the 300 euro one if I had to guess. Display at the office does support 60Hz but that is just USB-C input. The display has a built in dock. The display at home doesn't have this unfortunately.
Anyone done stuff with the louder-esparagus? Trying to set up full home audio. Do I just buy a bunch of louder-esparagus and a bunch of passive speakers?
https://www.tindie.com/products/sonocotta/louder-esparagus-media-center/
lol that username. Anyhow I have never heard of it
I got to it from here
https://www.music-assistant.io/faq/stream-to/
I think my home assistant set up is too stable. It’s been over a year since I really had to do anything. Have any of you run into this problem where you lose the passion for the hobby due to stability?
instability makes me want to abandon something
I mean, I have kinda hit the point where I keep moving stuff around and batteries have died. my HA has kinda died except for being an alarm system
its a mac you're supposed to throw money at apple fool.
it’s not my mac, so i’d rather not
have the person who owns it do it then.
thats what they signed up for after all.. 😛
don't they know its more cinematic to be at 30fps!?
nope
i hate 30
lol
it’s my employers mac lol but i have issues with it at my home work spot
If anyone else wants to know their GitHub has a good rundown. https://github.com/sonocotta/esparagus-media-center
Bought
6x louder esparagus,
6x 65W USB-C Lenovo ThinkPad Laptop Charger Replacement Power Adapter
6x 30 pin white/blue screens https://www.aliexpress.us/item/3256803615072329.html?gatewayAdapt=glo2usa4itemAdapt
6x double sided tape dots https://www.amazon.com/gp/aw/d/B0D3XRG6XR?ref=ppx_pt2_mob_b_prod_image
Resonate is probably something I am gunna play with at some point for audio stuff as it becomes a bit more "complete"
it's pretty cool
it was so in sync that it was hard for me to tell that music was coming out of different speakers in different rooms - the sound was just everywhere
Nice, I keep threatening to do multi room audio but never get around to it, the esparagus units have looked good especially with Ethernet support, would love to avoid Wi-Fi issues with audio
Can you provide a high lvl guide to what you're doing?
At that point though, ceiling speakers!
Bower&Wilkins have nice (and good) in-ceiling and wall speakers.
They make some fantastic equipment
I wanted the floorstanding 6 series a while back, I went for similar constructed units with similar drivers, maybe one day!
running b&w dm640i on Rotel, would not change it for newer models though..
I don't think that's where you're supposed to wear them anyway
Hahaha. It helps with the cold!
I wasn' expecting snow till december ( LAst years we had christmases without snow lmao)
I'm lowkey terrified of going out with my loafers lmao
I just got my replacement heated jacket and gloves in yesterday
I have one of those jackets! It's a god sent in Montreal.
Did not know they had heated gloves tho 🥵 I need some now haha
i just cleared stairs wearing the loafers. It was not easy, so slippery
slippery yet comfy 😉
Guide: buy asparagus units and have vendor flash them with squeezebox or whatever it's called, put one in each room of my house, add them to music assistant, plug each one into two bookshelf speakers, enjoy full home synced audio. Not sure on the specifics yet
do they make the music smell weird?
Only when you pee.
is that why you are yellow?


Speakers in ceiling, cable to server rack plug into amp
Speakers in ceiling is bad according to reddit I thought. You're saying I should run all the audio cables back to a home base instead of putting them near the esparagus louder amps?
Do you want whole home audio or do you want a perfect listening environment? Ceiling speakers are fine if you just want noise
dont forget your directional ethernet cables. /s
oxygen free gold of course
I'll have you know they are even tipped in gold
No no it’s gotta be solid gold for optimal electron conduction. All for the low price of exactly twice normal cables
twice?
thats adorable.
🫠
One thing you do want to watch for (if you're using ceiling speakers for music, and not a more rigidly-positioned home theatre layout) is they can do some right fucky things with stereo and cancellation if there's more than one speaker pair that can be heard from any location.
Often better to run the things in mono so every speaker is outputting the same thing.
true, bought my pi for pihole, ended up being my HA hub xD
pi starts to suffer when you start asking it to compile esphome stuff frequently
in being.. y'nkow.. a pi
suggestions for OS for touchscreen PC for HA interface?
thing looks like it has a bunch of gpio too 😄
thought it's SSD was fried but seems to be showing up gonna try formatting it
but
I'm sure you guys got a good Linux distro for doing touchscreen HA
suggestions?
having GPIO; and having simple access to that GPIO does not mean its going to work as you think
also. probaly not GPIO
and even if it was.. good luck with random hardware without documentation! 😄
oh I never said I thought it was going to work
I've been developing since c64
soft, hard, embedded
if I'm lucky, and it is, maybe I'll find the GPIO chip and it'll actually have a good driver I can use
and also that
this was a medical device so totally possible it's gpio
docs aren't common though, think I found some years ago, when I looked again recently I found shit
even if it doesn't work, as long as the touchscreen does on linux, and wifi I'm happy
even if wifi doesn't work I'm considering doing POE for it anyway
but yeah no I didn't think I was just gonna boot this up and use it like a pi without a bunch of effort lol
seriously can't find a screw that fits the ssd lmao 😢
figured m2.5 but noo thats too big
which is the smallest I have a stock of lol
pleb. 😛
comports not surprising.. but really odd comports
which makes me think the other port is probably parallel header
unless those are meant for like full RS-285 or w/e with all the extra bits
probably
medical gear
although seriously I dunno wtf this would've interfaced with or controlled
not really a convenient way to access any of these from the chassis tbh
there were like 2mm thick plates that had to be removed to even get inside the thing
each of those holes had like 2mm thick block off plates
bent the shit out of them just trying to get them out even haha
and wasn't just support for mounting or anything they were meant to come out for cables and stuff just insane how thick they and their tabs were
so much random stuff on this board
big power headers
sata ports
serial for days
bunch of random jumpers
cables that barely look better than jumper cables for lcd stuff
headers and more headers
tpm port (v1)
oh shit
I think this thing might have a built in charger too
it has a internal dc port, which looks like it'd be used for a battery
there's a port just labelled pwm
it even has an x1 pcie slot wth
I don't even understand how you'd even use half of this in this chassis
although I suppose this board must've been used in other stuff haha
great and those screws are too small lmao
but yeah was really hoping there was something easy/standard that's used for a quick kiosk mode install for ha?
any time I've done this before I've just done my own based off deb
most kiosk stuff I'm aware of tends to use things like android for fullykiosk or etc
i'm sure theres a linux one but I'm not aware of it.
oh yes, that can't go wrong at all.
updates your twitter while in sleep mode; I bet its getting all the reich data.
why does it look like there's an input switcher
there is an hdmi and vga port
but I assumed just output
will have to investigate
and yeah that feature is odd
especially on a medical device
maybe there's another use for it
never seen that on a consumer device lol
almost as sketchy as IME
was almost gonna netboot this thing but if the ssd works then eh
vertical viewing angle suuuuuucks
surprsied that part isn't good considering where it's from
hmm front buttons seem to be all sw not fw
which sucks dunno if they'll ever work without specific drivers for windows7 embedded
actuall all viewing angles suck dang
maybe better if I can get the brightness up but who knows if that'll ever happen
is it worth all this effort?
.... probably not.
lol definitely not
just messing aroud for fun
tbh finding an old tablet and trying to make it boot would probably be infinitely better
smaller
thinner
better resolution
bricked it when trying to root it last try though
like it just died, doesn't even do shit now which is odd
dunno might have another tho
super old though (tab s1 and s2) so dunno if HA app would work
or what browser version might
my gfs old laptop is also touch screen but that thing is a weird amd apu and it's evil
though linux might be okay on it
but I'd have to like
rip it apart and build a custom enclosure to make it a wallmount affair lol
these serial ports do rs232, rs422 and rs485 apparently though
oh just com1 does
weird
has a CIR controller
I can't even get my gf to open the app to do shit though
bout to swap the thermostat onto ha
having something on the wall would probably help
hoped doing some other stuff might force her but she just makes me do everything now lmao
I mean.
ideally.. you should never have to touch the thermostat
lol exactly
that too
we have radiant heat
and a dumb t-stat
that is super far from any of the radiators
and is basically broken
sucks bad
after this, unless I specifically want warmer or colder for some reason, it should just stay at the temp I set even in summer will turn on the smart plug for the ac
ugh deb is taking forever to copy to this usb
I mean.
.... smart thermostats are actually one of the very few things that actually tangibly improved things
at least ones with remote sensors
HALLO taptap you is usb3 and this isn't that big of a file
bad usb?
oh I'm building my own
yeah I'm not that far
well, its more of a controller that goes on the air handler and controls that side and etc.. but remote sensors make it work
I just have to..
... get off my ass and fucking finish soldering the beta boards
🙃
got the power figured out (solenoid uses 24vac to turn on, and, somehow there's a 3rd return wire in the wall behind the tstat even though it was always dumb, so yay)
got a solid state relay on the way
got esp32
got some sensors
although my pm2.5 I'm worried either it didn't come with a cable or I lost it
and the pin pitch is small
that board is..
looks nice
then I'll put it all on some perf board and test
if I like it maybe I'll make a board
8x ssr, 4x optocoupler inputs for 24VAC signals; leds.. i2c; onewire.. etc
or maybe I'll just use yours lmao
canbus for future thoughts
since I madea this for a guys house stuff
and he wants smart vents.. so.. canbus smartvents probably
that's the fun part!
i tried using a shelly that said it can handle 24VAC
...
It was actually 28VAC coming out of the traansformer
so it blew up some of the diodes on the shelly
because of course.
I got one of these for 2.5
oh shit yeah mine is like 28vac or so
but my module says it can do upto 30v
my first v1 boards were... dubious becuase my dumb ass used the wrong power circuit (an LDO) instead of a proper buck circuit
nice
by cutting traces/or removing the pullup resistors
yeah I gotta find the cable for that sensor if I got one looks like they do come with them kinda pissed the bag I had it in had a hole lol
oh the pic I showed isn't even the same, similar but bigger one with diff pins
i do regret my choice of connectors tho
picoblades are tiny little fuckers to crimp
I thought I ordered a whole shitpack of sensors from amazon a while ago too for air sensing but either I didn't or I misplaced them
so it'll handle the current fine for the SSRs switching
I tried to look at how a nest does things
.... they use the tiniest bitch components I couldnt tell
wild overkill lmao
haha yeah I know
but I live in an apartment so it could be useful for other stuff
plus amazon gave it to me free
super-generic chinese relays.. I don't really trust around mains tbh
especially s most of those when used for their actual higher voltages really do require a heatsink for proper usage at any reasonable wattage.
I went with toshiba relay parts on my board.
I mean I assume LCSC didnt hit me with fakes.. because that'd just be dumb. (I was gonna use chinese stuff but their datasheets were just.. ass so..)
i'll add you to my list.. 🤣
nooo, just left from home for a day and meanwhile all the tp-link devices decided to stop working and after rebooting HA suddently my zigbee adapter is found at the different address and it starts migrating it... why today 🙁
man I think the bios battery is dead on this mofo lol
and it's all heat wrapped and on a pigtail connector
also forgot deb needs a diff iso if you have anything with binary firmware (like apparently my intel wifi and nic)
though it says this
UPDATE 10 Jun 2023: As of Debian 12 (Bookworm), firmware is included in the normal Debian installer images. USERS NO LONGER NEED TO LOOK FOR SPECIAL VERSIONS HERE. online lmao
wth then why is it whining
(13.1 is what i grabbed) luzl
🙁
guess that one doesn't have firmwares
not that it seems to be documented very well other than implying new isos should have it
shrug lets try the net install iso
OH CRAP the pm2.5 sensor I ordered I jus tlooked at the listing
maybe I didn't get a cable.. and no that's no where near 0.1" pitch or I wouldn't care
hopefully I can find that little adapter thing though it doesn't look like it really changes the pitch either? ugh 😢
this was the sensor pack I was looking at though other than the pm2.5 and scd30
You want to take this stream of consciousness to #the-workshop please.
uh sure 😄
that looks like standard 2.54mm pitch to me
the pic is deceiving
replied with pic in #the-workshop as req'd
Got a MOES Zigbee 4 gang smart switch from AliExpress to try out. So far I’m very impressed with its performance over Z2M, but with 12 possible actions (single, double, hold x4) there’s a lot of automation creation to do. So I deployed another wee fun AliExpress purchase to let my family know that all functions may not be available yet! 🤣
thank god for updating this server so I don't need to verify with ID anymore haha
euh
That was a Discord-level thing, not a server thing. The highest level of verification servers can set is only phone number.
Nothing has change in this server. XD
Oh ok hahaha, well, glad it changed :p
I love that Google says this is real:
Is there someone with experience in minimalist?
Please help me in #1438238451051790336 or dm me
Crossposting like this is explicitly against the rules
damn, that's some precise battery monitoring
You can never be too certain
We had one vendor at work that liked to ship replacement HDDs in a box labelled "Qty: 1.00000". Because you do want to be sure you got the exact right number of drives
just a bit
It wasn't mentioned in any of the changelogs / breaking changes about the Google Cloud Say going away. 😐
It just broke my automations that relied on it. 😐
@forest edge guess what? It's going to rain!!!!
Time to celebrate. Stocking on wine and Crab. It's an event!
Super long shot, is anyone aware of any LED light for a hallway, that is battery powered, does not require any wiring and bonus for HA support
I think that came up maybe 2 years ago, and still appears to exist: https://www.home-assistant.io/integrations/google_cloud/#action-say-legacy. Please post in #1284966915055288530 for more
<@&330946878646517761> ^^
Gonna guess it's Elon crypto spam, don't even need to click on it
No kidding
only started this design on thursday but i’m really liking it. some stuff like the alarm controls will def be changing but the productivity focus is perfect for college and i really like the dynamic views
Evening all
I've avoided local Tuya forever because it just wasn't worth my time, my gosh one of the forks is stupid easy now
I was legit impressed(yes I know Tuya sucks, but still impressed)
I don’t think they’re gonna need that bottle of aloe on the dash
Does Alexa Media player not work with Amazon Smart Switches?
Not clear what one has to do with the other. #1284966582375813201
Or #1284966915055288530 , depending on what you want to do with the switch
That’s cool! Could you drop a thread in #1284960456880029707 with descriptions of the various components?
spotted on ali express:
that ethernet cable...
it annoys me that people badly crimp like that in the first place... but putting it in marketing materials... WTF!
Source if curious
Yet they managed to do this in one of the other pictures, so they know how it's supposed to work
That is pretty egregious for several reasons
makes me think that they have no attention to detail and makes me wonder about the quality of the hardware...
Greetings, anyone aware of an esp32 device (or similar) with an audio line input that could be used for audio reactive / wled without the need of pc with ledfx ?
Why are these
https://a.co/d/3L0KaGV
So much cheaper than these
https://a.co/d/gKSnMM2
Enhance your smart home with the Tapo P115 Smart Wi-Fi Plug featuring energy monitoring. Gain valuable insights into your energy consumption with detailed statistics, enabling you to estimate bills and save money. Control your connected devices effortlessly using voice commands through Alexa or G...
Control lighting, fans, humidifiers and other appliances from anywhere with the Kasa Smart Wi-Fi Plug KP115 with Energy Monitoring. Monitor every consumption of your plug-in devices and set times and schedules to avoid waste. Add voice control to any outlet when paired with Alexa or Google assist...
Ask in #1284966353798697001
This is not a support channel.
probably because tp link are slowly ditching the kasa branding and want to encourage the move to tapo.
however you should not buy either of them. you should stay away from tp-link
but #1284966353798697001 with recommendations tag is where you should go for continued discussion
Idk how those discord thread things work so ig I'll just get the tapo ones
you create a thread within them like a forum. can buy what you like but IMO you should not buy them
haven't been on here all day cept to reply to QF.. you all miss me?
Can you do it for a month?
my contract won't allow it
@gusty fulcrum when I say "create a thread" that does NOT mean "send me a DM" I don't mind helping but I don't do support in DM's
lol
Sorry, need more data 🙂
Just got myself a rain and illuminance sensor damn its cute !
Now where the fuck to install it 🤣
I don't understand why people do it like that. It's not even easier
It's much harder
Wifi over zigbee
to run stable wifi? yes
not sure which is more stable: my wifi or my zigbee network
I would hope they would both be stable
I am the least stable part lol
ever since I started over with the zigbee network its been way way better
the router density on mine is great
yea, I think I cycled all my ikea stuff out
I am doing that RN with my shortcunts
the lights are fine and will be replaced when they break
Anyone tested this?
My Ikea lights are such a bitch, they really don't like multiple commands at once. I can't integrate them in adaptive Lighting because they either dim or change color, not both at the same time
Fair but I do none of that at locations where I use the Ikea stuff lol
on or off is fine for me
Yeah my Ikea bulbs are only nightlights or motion lights in the bathroom etc
That is what I use them for
Kitchen, hallway and my home office
and some support lights in the living
I would have liked to use them on my ceiling fixtures
Got that
good
but the kitchen and hallway are the exception to that rule tbh
ceiling light in the living is a hate crime IMHO
Made my own hue signe floor lamp to have somewhat bright lighting but being indirect
Dang places lacking ceiling light are so annoying
noice
Got overhead can lights in every room, if I want lights on, it's the bloody sun in there
Indirect and low lighting is available for other times but God I hate places where you can't actually get a room lit
where do you order your fluorescent fixtures jk
Hotels love doing that for no dang reason
We got ceiling lights but never use them because we are lazy and don't won't to get up, push the switch lol
Led can lights
Also some ceiling fans and a ceiling boob or two in closets
nah but bright ceiling lights just kinda ruin the vibe :(
That's why you turn them off when you don't want them
Lol
Not having them available is the crime
I know the one you are refering to lol
I even have a button on my nightstand for those lights
Best device ever
Also use it to control the ceiling fan
Buttons are underrated
https://github.com/AeroSteveO/EspDeck oh I love me some buttons
I got a hue dial on my beds headboard to control all rooms
I eventually want another one that's like a universal remote, depending on what room you're in you control different stuff with the same dial
buttons are awesome - I have 2 of these - https://www.mylocalbytes.com/products/localdeck
The Apollo button board looks promising too
Man everyone is making them now, lol
Iirc I built mine before local bytes, but theirs is far more professionally done
I started a TREND
The BTN-1 Macro Deck is a versatile, customizable control device featuring four mechanical Cherry MX-compatible hot-swappable buttons with LEDs both under and in front of each key for clear visual feedback. Designed for ultimate flexibility, the BTN-1 lets you easily swap switches without soldering, perfect for creator
It's one bigger than the drop.com "key"
It wasn't so much as a support request as a gripe as I usually read changelogs / documentation, and there was no mention of this breaking things anywhere. So, just feel it should at least be mentioned at least SOMEWHERE that users of the legacy format can no longer use it in 11.1. 😐
Icannot do that hall
https://www.printables.com/model/1037546-multi-color-media-and-other-icon-keycaps if you have a 3d printer that can do multiple colors, you can print out custom keycaps
Eventually I'll try to generate keys with light passthroughs since there are some mods to that github available for that purpose
...
I kind of wish I had a 3D printer now. 😐
My Logitech keyboard with all of the letters wore out is kind of sad.
I've got every printer, but none 3D lol
Missing the funnest printer
4 in 1 Picture
Probably
Duckies excited for breakfast 🍳
Gotta bump those numbers up, those are rookie numbers of enterprise printers
Counting all locations we're at about 40 machines
50 if you count desktop Fax thingys
Yes.
Well I'm not gonna create a whole thread just to ask what your issue is with tp link
Okay
Sooo how much does it cost you to place a post in a supprt thread? The rational for using the thread is so someone else in 2 months can search for thread before starting a new one, its a resource generator for people in the future. Worst that happens is no one answers the thread...
More time was spent talking about it in here and in DM's then it would have taken to type the question :/
Why create a thread if my question is directed towards a single person
I was asking him what his problem is with tp link but apparently it's a secret
Because the orginal question was not
click on a support channel, and click create post. It's really not complicated
it's identical to a chat channel, but without the noise of other people.
other people suck
@gusty fulcrumThe way I look at this channel is I don't ever expect a real answer for anything I post 🙂 Not that people aren't helpful but its not the role of the channel, not sure if that makes sense
Perhaps if this was the 80ties we could call it the smokers room. You dont ask support questions to someone on his siggy break
Oh 90ties in the 80ties they did not have a smokers room. They smoked where ever
I was going to say, 80's smelled like smoke and cocaine
I still do
What about the conversation pit
We should bring those back
Plus they don't smell as bad 😛
nah, that'll motivate people to talk
God no
eightieties
Dont know where is the right place to ask this, but anyone has any idea where to find premade CAD Blocks for smart devices, I need specificly for zigbee/akuvox/akubela but any blocks will work.
#the-workshop might know
Lovely kitchen
Where do you keep your snacks?
Asking for a friend
the raccoon-proof drawer, of course
You know teh best part about robovacs, if you're patient you can get a 1200 dollar vac for 400 when they come out with new models lol
Prices also vary quite widely. There was a $500 swing in the Amazon price for the ones I bought from month to month
A price tracker will help with that
I just got a dream l40 ultra for 400 not bad at all, more features then my dream l10s ultra and cheaper 🙂
And rootable, although it really makes me appreciate the HA community versus the valetudo
that is still 300 too much :(
eh? 100 is what you think it should cost?
Robot vacs have been a game changer in my house. They're definitely worth some money
I have a 50 dollar tuya vac my wife bought before she knew better, it basically bounces off the walls/furniture to try to supposedly clean the floor
The original roombas were like that. They were not good
With four cats in the house, vacuuming cat fur is a chore that now belongs to robots
I have 2 boys who make a mess, 3 cats, robo vac is great timesaver
At the very least, it keeps the mess under control between more deep cleanings
RobC I don't realize how good of a job it does until I look under our couch, we have all hardwood floors so it gets so dusty so quick
Vacuums cat litter, too
Yep, me too
Does an awesome job on the hardwood floors
anyone use ad-guard here and interested in a custom lovelace card?
Thiiiis looks like giving robot support in the no support channel! /s (but also yes, robot vacs good)
I need one that can climb stairs
Dang I vacuum like once a month and still want more robot
I send my robot to vacuum daily
daily for sure
yes, we have a 4 level house....
yuo can hire me
oh, no. I can get one on each level. I need it to be able to clean the stairs
lol you need 4 bots then?
I just need a smarter robot so I don't have to worry about dog toys and cords
any tumble the stairs?
workling on it lol
I don't use my attic, so I effectively have 3 levels. Not sure yet if I'll put one in the basement though
I can gaslight you into being a robot?
My Roborock supposedly copes with cables
it sometimes does :/
I've gotten all my cables secured except for 1 set of speaker cables for the surround sound that the cats pull out once in a while
got some unsecured ones in my basement
though I'll do some stuff with the floor there and then I'll just hide the cables that way
I am normally a very patient and even tempered raccoon, but these bloody ikea motion detectors are doing my nut in
Not for long.
Rumour has it there are other channels than just this and #memes on this server though so I might have to go and look through them
False
You might want to avoid the ones where we talk about ESPHome-powered raccoon-machine hybrids
Robocoon
I think I'm at roughly 50% success rate with getting responses to my issues in the other channels 
granted, I have weird issues
Or maybe not, depending on how much raccoon fun you want to have
You may not like it, but it is what peak performance looks like
(Unlike the ikea motion detectors that need re-pairing when the battery runs out, despite it reporting 34.5%, but I am not mad)
|| that was a lie ||
Mains powered radar ftw 😛
It is just to detect presence on my stairs so the light comes on
I could use pressure plates
Or good motion sensors
lol
Or maybe hire a butler to press a zigbee switch when you get close
I need to figure out which PIR sensor to get that can avoid cats
Go fancy, make him light a candle
Should he also carry the candle for me?
You mean there's another option?
Ofcourse m'lady
I have mine placed in such a way that the cats don't really trigger the one at the top of the stairs
But the one at the bottom always triggers
Especially when they are having poop zoomies
I only have 1 toublesome one in our entryway
Cat or motion sensor?
Both?
Show me your dongle
Only if you show me yours first
I wouldn't care except when wathcing movies on the projector the entry way lighting up is annoying as its on the side of my vision
I understand this 100%, I have a similar "issue" but I can live with that
A tunable radar might actually be better
But I was fooled by marketing
Put some sheet underneath it, like a small roof but on the bottom. Makes the fov smaller
eh PIR goes through walls....
I wondered about mounting it low down, upside down
or wait .... am I confusing stuff again
As to cut off a portion of the view, it is unconventional but may work
Microwaves see through walls
Pir is the "simple" Infrared stuff lol
But pir shouldn't




