#the-water-cooler
1 messages · Page 197 of 1
volvo actually released a comparison of the xc40 (i think) in electric and fossil versions. they did not break even until you had driver 50000km without changing battery pack. and that was on scandinavian power (94% renewable). for average european power it went up to 100000km. and for world average about 150000km. which you just won't do without changing the battery pack.
got a source for that? I have seen much lower numbers.
LFP is fine, it has no nickel, no cobalt. Just lithium, iron and phosphate, lithium can be found everywhere. Tesla has already been using in production for a couple of years, more manufacturers are following.
i can't find it again right now, but volvo compared those two as they were made at the same factory and shared almost everything except drivetrain.
but I acknowledge the use of metric units
I think I'm too stoned for that volvo xc40 textblob
volvo has also said that the co2 emissions for the production of an electric car are 70% higher than a fossil one
yeah because they hated that they were bought by chinese e-manufacturer
so they make e-cars look bad
same story in germany
you also have the opposite. manufacturers who do not give you the co2 emissions on the making of the battery when presenting numbers on how ecological they are
as if the battery just magically happens.
we have co2-neutralising facilities in China (that are non.existing) to compensate for all co2 emissions. It's easy.
was a very recent scandal
and we buy co2 quotas from countries that are not giving a flying fuck about keeping their quotas anyway
then we can write onto the car "co2 neutral production!"
😄
either electric or petrol
well, as it turns out... those certificates are not worth the money of the paper they are printed on.
it's ofc a shit show because obviously it's too many co2-certificate-scammers already out there that sell you one without doing anything about co2 in the end
it's just easy. greenwashing
same with microplastic...
it's so sad how lobbys destroy our planet for profit
toxic wasteland
"pay a little extra when booking your flight with us and we guarantee that your flight is carbon neutral as we will cover it with a co2 quota"
they just made a calculations that alone for PFAS chemicals that got into the soil/environment during / after production the damage to clean that up is more than 100 billion Euros
only in Germany that is..
@lone dagger 🙂
it doesn't work like that. You get audited, you fail, you end up in jail
I took a modafinil earlier - isn't that a us brand?
yeah ... nah ... they probably have a perfect system already ... to then show you something if you need to see it
you are talking out of your ass
3M is one of the worst offenders.
I've seen ISO audits 
You meant to reply to #the-water-cooler message
funny
I know
😂
I'm refering to this investigation... maybe you got a translator in your browser?
and what happened after this investigation?
there is a german proverb "Die Mühlen des Gesetzes mahlen langsam" – the gears of law move slowly
so probably the company which sold the certificates is already long bankrupt/disappeared 😉 will report back when I hear something
This face plate is HILARIOUSLY too small. I cannot stop laughing.
Yes is from a Chinese community but the app itself is English!
you don't get add-ons (or you can with a lot of fiddlin') if you use the docker version
what kind of addons?
any of them
look through the list of official and unofficial add-ons to see if that matters to you
if it doesn't.. docker it is.. but if you want to run an add-on.. no docker.. that simple
You only get those with HAOS, not some supervisor based installation
Im a complete novice with HA, havent even got my P1 to USB cable yet. haven't tried HA yet, literally just testing the waters a bit so I have no idea what undertand ounder addons
I mean,my HA app runs but havent connected anything yet
if you want to just play around with HA, then yeah, go with the docker version actually
that way you can destroy the container and thats all the cleanup you need to do
Though you should likely ask in #1284966540617449515 not this channel
Since this is the off topic section 🙂
I just want to be able to read my boiler data, control my floor heating and lighting lol
nothing too glamorous
Yuck add-ons, that's limiting
“Chill section with no support”, “off topic” made people revolt.
CLIPPY HAS JOINED THE CHAT
Im so tired of my last med shot.
asking for mental support
Kusje?
can I get a IOU for when i feel better?

Sure.
in other news. I can parse the pathe movie site with pupeteer. so when some one calls my voicemail asking if i would like to go the the movies. It can sugest a movie
Mistressy. She is small (acoording to dutch standards)
No TikTok
Oh wait
I’m tall for an American.
nothing is normal in the usa
So average European then
Though I lost a half an inch getting a disc taken out.
But yeah small by Dutch standards.
All of you are tall as hell.
My fathers side is 7 feet, my mother's side is 4ft9in, I'm happy with 6ft1in
to the metrics MACHINE!!!
Floppy, MD or MO ?
i think its from her spine
Insert disc and press any key
remove installation disk before reboot
just get your back into it.
Watch it, I'm old enough to remember when we had to rewind tapes to continue the game
Or flip it over in newer games
Spine yes lol. I had a microdiscectomy a couple years ago.
You’re still shorter than my husband, atx.
accrding to google that got to hurt
Yes mistress 
In the MRI for that disc rupture, it looks like my disc is licking my spinal cord.
have you tried take it out give it a blow and try again?
That's what she said
Fair enough.
I liked it more when there were not threads on discord
Yes
Missy, your turn
Feel comfortable in the future to tag people who were helping directly in the thread. We discourage cross posts. 😊
Same.
Support Threads feels abanoned
Thats exactly why I askes here lol
threads are pretty much dead, much more activity here
Because it’s the shitposting channel.
with support
😛
who's @iron granite ?!!?! Fresh meat?!!
It's not my alt account, I swear
AHhhh fresh meat.. memory lane to diablo
I been in once human the past couple of days so not paid much attention to discord
Stay a while and listen
I am Clippy, the LLM based moderation tool for Discord.
may actually have to buy a new mouse. the mouse wheel button only works half the time
It seems like you have problems with your mouse wheel button half the time. Have you tried only using it the other half the time?
I bet clippy does not mind providing support in DM.
Please be advised that unsolicited contact via DMs is against the server rules, unless it meets the defined exceptions.
porn is allowed..
I have very little space on L5 and S5 for the nerve. Any swelling of the disc is sciatica down my left leg. Discs and nerves are no fun
My L5 is already fused to my S1, they just stopped distinguishing them in my scan reports. 
I’m trying to put off any surgery as long as I can, as I know one will lead to another …
I’ve got to start doing my exercises again like last month. 
I've had a sleeping leg for 13 years, suspected L5, never saw anything on MRI, it has mostly stopped since I lost 25kg though
Looks like a horned Kirby.
Hot nerve pain has appeared in my lower spine and hips, it’s super fun getting older.
Yep on my list to lose some weight.
Front of your thigh?
Mine is back like hamstring. And then skip the calf and foot numbs
Yes, very agressive whenever me and the wife went big city walking for a week
Front left side of left leg
Yeah that’s a nerve on the front side, it was the weight pressing it.
Yas
I had the same thing until I lost weight.
wtf is sleeping leg? heard of restless leg...
Numbness
my knee is telling me i had better lose some weight
Dead like it fell asleep.
I had a disc blow about 10 years ago. That was worse than all this.. that felt like hot pitchforks in my calf. 12 weeks of PT and decompression in a pool to get of that
been lucky ||crosses fingers|| so far with just some minor arthritis stuff. nothing that requires surgery yet
Old fart over here
My L3/L4 rupture caused enough nerve damage that I still have limited feeling down the outside of my left leg.
luckily when my back locks up twice a year it is a side effect of a muscle locking up inside the hip. 10 minutes at the chiropractor and i am good again.
This was 2.5 years ago almost.
-# Don’t go to chiropractors. Go to physical therapists. They have the same techniques but are medical doctors. Chiropractors are not as well managed.
but damn how limiting it is when the back doesn't cooperate
I prefer naprapathy
insurance will decide that route lol
Bad genes .. lived through my father complaining about his back and sciatica for decades. Pretty sure first mri showed spinal stenosis and second basically shows it’s worse
I don't feel like paying $$$ for short sessions multiple times of the week out of pocket
the chiropractors i go to have their education from the uk where they study medicine along with doctors first
40+ adds up quick if your inurance dosen't cover one thing or another
PT is strengthen the core to take pressure off the back
well thats why I said insurance decides that lol
Work has covered mostly all physical therapy the last 20 years
Chiropractors shouldn’t be used, this is a hill I will die on.
Yes we are slaves to our employers for healthcare too… such a wonderful idea
What a beautiful dystopia
It is beautiful here in most places!
there are certifications for chiropractors here today. it used to be an unprotected title.
and the chiropractors i use are actually colocated with my doctor
My pessimism says they have a contract for referrals because that’s common.
I would still insist on a referral to a PT. You get massage therapy, exercises to fix you, and they will teach you techniques a chiropractor uses if you ask. Their goal is to fix you, not have you come back for another adjustment.
i did get exercises from my chiropractor as well. took me from needing unlock weekly to 1-2 times a year and then i got lazy
i need to continu the exercises. this body only gets older
I have 2 minutes from bed to office
Which means I'm happy I have 10 minutes to my naprapath
i used to do 10km each way to work on bike. now it's home office. that is a lot of exercise to compensate for
you need a desk treadmill
i do have a treadmill. and i think i'll start doing meetings on it
it's not smart though. so ha doesn't know about it
Just a quicky; What release would I need for Synology-based VM?
meetings but everyone needs to be on a treadmill
would take a week before people just write an email to resolve issues
VDI or?
Good one. Did not think of that. Thank you!
But really, you should be creating threads regardless of whether it's a quicky or a "longy"-- there should be zero support here.
Same goes for most threads 😆
I mean, that's not true.
People answer what they know. People don't answer if they don't or the poster didn't provide detail on what the issue was. But asking for support here is a good way to get slapped.
By non-mods by the looks of it too
You can be slapped by me, if you prefer that.
oh no! thats clippy! run!!!!
I would, in the future, yes. 🙂
You prefer a timeout from me over a nice advice from Ender - noted 
Of course. But only if they see the threads in the first place. Questions much more likely to be seen and answered in more active areas. 😉
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re looking for support and unsure where to go, check out https://discord.com/channels/330944238910963714/1284968640189304913 - it should help you find where you are going. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
@tidal bronze Home still intact? no mudslide incidents?
10 years from now we'll still be talking about threads in this channel lol
well you all will be.. i'll be elsewhere
yes. my voicemail now knows what movies are playing.
I think so. Just woke up from a 18 hour bender.
thats a lot of bending
at this point ... I'd love to hear an audio example 😄
need to wait for my next shameless youtube video
last one is in the big small victory thread
Yes. my latop hass instance now is connected to my voicemail system.
can pick up waiting calls with a mouse click
honestly ahhhh this is the reason I don't telephone
Dont text and drive
Press one to control your home in English
(voice speaking in hindu)
Listen carefully as our menu items have recently changed...
Oh noes a sd card of a pi is dieing
you know how I handle phone computers nowadays? spamming numbers until it works out
Dont you get some text with some manual then?
and with works out I mean I have a human on the other end
rep re sentative
what's call screen feature
Now, I wish there was another way to do this, but it'll work.
It screens calls
My 7a does it quite well.
ah yeah I looked up an app as well... but they wanted like 2,99/month
I love this era
It's free on my phone, and it's Native.
Find out who’s calling and why to avoid unwanted calls. Available in USA, Canada, and now Japan.
Who’s got time for spam calls anymore? When a call comes in from unknown number, Call Screen* lets you find out who it is before you even answer. It helps you optimize your time and prioritize what’s important, like finishing your ☕️ in peace.
Ch...
Collision Detection came to my watch over an update. 🤷
but can you do satelite calls with it? can it run crysis? 😄
Not with my watch, and my phone lacks the required equipment to make it functional.
huh how?
relays run with starlink?
yeah sucks to have connectivity everywhere 😛
soon all your excuses won't work anymore
Luckily I have Helium Mobile, so I don't have that 👍
35? I'm only paying 5.
Actually, 60 a year, but still
5 with satelite cell?
I don't have satellite support.
There is actually one really big problem with it. People get an annoying sense of invulnerability from things like this.
Here in NZ we have a massive problem with dramatically under-prepared (clothing, equipment, food, etc) people (often, but not exclusively, tourists) wandering off into the bush and triggering large scale search and rescue operations.
Despite a campaign for, and easy availability of rental locator beacons, people are going to think their phone is "enough". Not realising the major attribute of the PLB is it's supposed to be attached to your pack's chest straps, and designed to be able to be activated one-handed while you're hanging upside down from a tree with 1.5 broken arms, and have a battery that's guaranteed to last long enough for you to be found.
I know this is an issue that affects a small percentage of the population, but it's quite literally a matter of life and death.
I'm an OG Beta Tester for the network, hence my 5/month plan.
I’m at $15/m for my cell + data
I wish I didn't need to, but unfortunately I have to be able to receive calls.
Jobs and stuff
is it loraWAN based beacon system?
I have Interviewers and Banking stuff that need a phone to call.
They don't support even email 2FA and only use SMS.
so dumb since it's broken
And I'm waiting on a NetSpend card to come in so I can actually GET money from jobs.
with a bit of connection and money you can hack into the global network and redirect sms etc.
https://en.wikipedia.org/wiki/Emergency_position-indicating_radiobeacon
121.5MHz + 406MHz
An emergency position-indicating radiobeacon (EPIRB) is a type of emergency locator beacon for commercial and recreational boats, a portable, battery-powered radio transmitter used in emergencies to locate boaters in distress and in need of immediate rescue. In the event of an emergency, such as a ship sinking or medical emergency onboard, the t...
My sister is big on spending week(s) in the middle of nowhere, and I'm her first emergency contact for her PLB
So I got bored and read up on how these things work
if you're interested in satelite stuff... there were a few talks @ 38c3 3 weeks ago (two basically)
pretty interesting
didn't know it was that easy to interact with satelites
Honestly - as always - half the challenge is people. The search-and-rescue people try to hammer it into people that they'd rather people set off the beacon and it takes three people and one helicopter an hour to find them for something that turns out to be nothing, than a week-long manual search involving 50 people trekking through the bush, helicopters with FLIR, etc, etc.
It's quite refreshing in this day and age, you used to see the occasional post on reddit from someone who've fallen down a cliff and had that "am I injured enough to bother people with this?" conundrum, always gets an amazingly positive response for just pulling the rip cord
yeah, just add a big fine... like for Mount Everest... 10k deposit there I think. Do something similar...
ofc the deposit is there for when you die 😄
yeah I mean haha guess that's quite an adventure
I'd also write on reddit about it 😄
ah okay.. there's the catch. 15$/day 😄 I'd probably think my cell phone would be good enough then as well
"No other meteorite fall has been documented like this, complete with sound," says Dr. Chris Herd, a meteorite expert from the University of Alberta. Finding a meteorite anywhere in Canada is something of a rarity. Last July, the first one discovered in Prince Edward Island was extra special, as it is likely the first meteorite impact to ever be...
death by meteorite
Dear manufacturers of smart home devices.
Effective immediately, if it takes more than three tries and a factory reset to get your device to connect to a network, you will be subjected to the overly spiky nubby dildo of reflecting on bad decisions until you learn to NOT make your devices so stupid about wifi connections.
Seriously, if even Tuya can manage a system where I click "add" and the device detects, adds, and instantly is in the system with no fuss? There's no damn excuse.
Spanking of connectivity things, I see TPLink is still playing sillyboogers?
defining that as what? 😛
we have epirb aboard. and now there is also experimental ais tracking via satellite.
ais is really meant for short range boat-to-boat signalling so boats with ais receivers can see position, speed and heading for boats with ais transmitters. ais transmitters used to be quite expensive, but now there is no reason to get just a receiver. they communicate over vhf frequencies.
there has grown up quite a network of land based ais receivers in order to offer tracking services on the internet. of course those only work along the coast. but now you may also get tracked by satellite services. so no more staying hidden even at high sea if you also want to be seen and avoided by other traffic near you. sigh.
i once set up my own ais tracking station just to see if it was doable. old laptop running linux, a cheap chinese hackable dvb usb stick and a big vhf antenna to replace the tiny little dvb antenna. worked like a charm. i could easily feed it into opencpn to get nearby boats displayed on the map
new mattress today: on the bright side this one is unlikly to self destruct and (somewhat litrally) stab me in the back like the previous one did in the middle of the night.... on the negative side my bed sensors dont work 😦
i am hoping a resistor value adjustment will make it work again but didnt have reworking a pcb on todays job list 😦
Do you know what ended up happening with this design? It seems really nice
For those who want to pay many $ for little performance
what kind of bed sensors are you using?
I was close to buying two cyberdecks yesterday 😦
No. The official Raspberry Pi 5 PoE HAT doesn't seem to be released yet.
sell win 11 key on ebay 
device just got cheaper
and I just know they will only collect dust 😄
weird.
it's cute thos 😄 https://www.youtube.com/watch?v=Xe-sZGGoloA
Pilet (starting at $199) is an open-source, modular, portable console for tinkerers, creatives, hackers, coders, and learners. Powered by the latest Raspberry Pi 5, it’s the first truly portable solution with a 7-hour battery life. Its modular design makes it easy to modify and hack—take your Raspberry Pi projects wherever you go. Feel free to s...
FSR's (btw heading out so wont see further responces for a while)
do you think it brings value to a setup?
need that expandability, who knows what I need it for in the future!!!!11!!!!!!1111!1!!!
/s off
and then we learned to just buy new 😛
funny enough my 4gb zimaboard just lives on top of my normal server as a dns server 
speaking about waste of money
I fell for it
I should get a zimaboard. They look neat
they are a waste of money for what u get
For some, maybe
noo get a CM5 ofc with a cute cyberdeck hull
No
but it's qt
only plus I dont have to deal with arm incompatible software
what software is not comaptible?
good question
even myself as a complete noob ... I'm compiling everything I am using myself
I wouldnt know since I dont have a pi in my setup atm
well it's more an OS thing I guess 😄
I have 3 pis collecting dust in a box
huh nobody has reverse engineered yet?
you got a bugatti chiron 3d printed ready to be build? 😄
open source stream deck controller for linux: https://github.com/StreamController/StreamController
ah so basically a plotter?
oh a 3d printer?
tbh it's a death sentence to old slow printers being slow imho
but you know you can build other new cool stuff out of it 😄
like teaching it to get a bear from the fridge
print a printer with your printer
is that even legal?
capitalism is collapsing
what is an astro amazon bot
I am not well informed as it seems 😄
it's also a GPL violating nightmare
just stay away from it after it works
Remember folks, don't buy printers from companies who actively and knowingly violate the gpl
I'll ask chatGPT quickly if BambuLabs does
well.. google = dead
so if GPT doesn't know ... or says no, I'm relieved 😄
sovol
prusa
biqu/btt
qidi
i mean there's also bambu lol
the a1 is great
I'd take an a1 over an ender ke any day
kingroon also, klp1
a1 mini is greater 😄 I mean cuter
my spidersenses tell me Clippy is telling us to go #3d-printing
their "rfid filament" is not required. It's actually just a useful feature.
The API stuff is annoying, but less annoying than Creality shipping printers with stolen firmware.

It is not a usual gif. It's a Discord emote.
You can make it smaller though.
oh wait maybe it’s bigger 
-# 
There we go.
-# 

Can anyone point me to how I can fully disallow non-admin users access to overview. I don't want to delete it, but I don't want non-admin access. Is there a HAC's or something?
#the-workshop might be able to help
#1284965988642590891 would be the right place for that.
They'd already posted there 
Please, as explained in #rules, don't crosspost
It's not related to anything smart home tho
Not sure if it'd be appropriate there.
More appropriate than here 😉
It is less appropriate here, where there is no support
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re looking for support and unsure where to go, check out https://discord.com/channels/330944238910963714/1284968640189304913 - it should help you find where you are going. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
I need support. 2 recruiters called me. Very delighted with my profile and my resume. Forgot to get my 24 hour notice.
Immediately hear the (im wasting my time) switch in there voice.
Im pissed
Thought it's more an "offtopic" kind of channel with no support specifically for HASS, well then ^^
I can send you tons of RFID stripes if you really want one 🙂
thats it. Im going go wild tonight and finished my presenation and make a youtube video. For yet a other project to save the world!!!
I have no job that a youtube inflenzer requirement
https://www.yetanotherprojecttosavetheworld.org/wordpress/ <--- if you can real long text of some one who cant write long texts
bro no support, dont support them by telling them what they can do here!!!
anyone know of a photo frame that can be automated using photo frame?
#1284966353798697001 might
After days of configuring my LLM assist, i can finally run diagnostics on the robots i'm testing from within HA. I feel like tony start designing his suits. and it's worth it
Oh that is nice
Do you have the jarvis wake word?
Hello everyone. Im having an issue with my wiz devices where it seems the antenna goes to sleep after some time. When I turn the light on there is a delay because of this
Is there a way to keep the antenna on?
Wondering why I keep getting 'Last automatic backup failed', when it backups just fine? 🤨
Maybe the appropriate support channel knows that. No support here.
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re looking for support and unsure where to go, check out https://discord.com/channels/330944238910963714/1284968640189304913 - it should help you find where you are going. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
It apparently did a gooftroop and stopped connecting properly on new connections a while back. I checked it again just now and it the integration is still borked.
Grumble why does an 8 port 2.5g switch cost 1/3 the cost of 16 port
Marketing?
I think its intended market
after switching my 5.6k resistors to 1M resistors. my bed sensor is hopefully working again! been a bit of crap day its good to get a small win at last!
I donno....have you seen the laundry list of unaddressed issues with the Tuya integration? Seems dead in the water.
nobody wants to buy the stuff to develop with 😛
@tidal bronze saw this and thought of something you might be interested in supporting. https://youtu.be/AlsOwUypceY?si=qcbv342oKng3Fm69
Ryan, a fire captain with the Avondale Fire Department, has spent 20 years protecting lives. But witnessing so many pets die in house fires inspired him and his brother to take action.
isnt that just the smoke detectors that deaf people use in a paw shaped 3d printed case?
deaf person is collapsed in the bathroom and the fire deptment is looking under the bed for a dog that doesnt exist
maybe
maybe i am just a person that sees the negative side of stuff though
specialized devices for medical reason always cost way more than the normal version. the pet thing might be the same but will cost way less
so in essence a deaf person could use the pet thing and save some money
the thing is that i am not convinced that in a smoke filled room that a fireman in a full face mask could tell the diffference between them. this means they have to assume there is possibly a human there unless they have been informed otherwise.
i am also not convinced it wouldnt hurt the already limited view they have
only if its rated for safety use otherwise insurence doesnt cover (depending on local laws)
on the internet nobody knows you're a dog
also integrating with HA is of minimal use. if there fire is bad enough the fire dept is in the house its likely the power is off
i just think its an awful product. sorry if i went on a bit of a rant there. its been a day
just gotta make HA fireproof then
bury homeassistant out in the yard confirmed.
🤣
closed loop water cooling for the computer parts; ground sourced heat pump it away.
okay, now we gotta add a safety powersupply on top
done
cover what? your death?
also maybe we can use CAT7 for this project? It must be more fireproof than 6a!
they wouldnt save money by cheaping out on detector because even though they may be alive they may be down a house
first of all, the device is for the deaf person NOT the insurance company lol
nor the fire dpt
lighted smoke detectors don't indicate a handicapped person is inside
they would claim if it was a correct alarm it would have alerted you quicker and you could have done something earlier etc...
I really hope Michael is not the guy handling my insurance case 😄
i am just cynical
you might get an insurance discount IF you had a system that auto alerted the fire dpt ect but that's about it
too many horror stories
nope
ok nabu works wayy better
jarvis is cool, but it sucks(at least with my accent)
Ever wondered what would happen if elevator's didn't have buttons and relied on vocal recognition instead?
Honestly I don't even need the 2.5g for what my setup is, ohter then future proofing if I actually get 2gig fiber in the future
I may do a SFP+ 10gig to my home server but mainly because I screwed up and have a realtec 2.5g networking which is hit and miss, and I like to tinker
My NAS is slow, so I don't think I'd even max out 2.5, since I'm runnung unraid
SATA 3 I don't think will max out 2.5, or if it does it won't be by much
I am running lancast, but only because i have a 120mbs DSL right now
My NAS could probably saturate a 50Gb interface in sequential reads, but only has a 10Gb connection
I'd expect those to become problematic for driver support in the near-ish future
The X4 uses the modern driver stack so it's likely to be supported much longer
I'm open to suggestions, that was just what was commended on the unraid pages I've read
(mlx4_core for the <=X3 vs mlx5_core for the >=X4, for the Linux drivers)
This only has a half-height bracket, but as an example: https://www.ebay.com/itm/175745600024
oh thats not that bad
The "MCX4121A" is the dual port 10/25G ConnectX-4, probably a good choice on price
They're available in Dell/HPE/IBM OEM versions like that, or the original Mellanox
only reason I said single port was power(don't ever see myself needing that much bandwidth)
The single port versions are often more expensive
And sometimes they're the exact same controller (and there'll be un-populated pads on the PCB for the 2nd port), so probably don't use less power
Yeah that one looks fine
Crazy thing is we're about to e-waste 288 servers with those Dell cards
The effort to actually take things out vs anything to be gained by doing so however, entirely the wrong side of the curve
ummmmmm, curious what device is doing that...
Taking the RAM (~2150 sticks of DDR4-2666 32GB) from those machines was entirely worth it, NICs not so much
thats over the last 24 hours lol
That might explain why my network is being poopy
Is that requests for a URL, or DNS lookups?
Because hopefully the A record is cached (has 300s TTL so should only be queried 288x / day)
But if something is actually trying to connect to it, that'd be a shitty under any circumstances
I'm NOT that tech savy, I run adguard for DNS filtering and I putz around with linux/unraid/windows for a hobby lol
Well found the device
its my Nvidia shield in our theatre room
That was wierd, thankfully I run a cached DNS
oh for pete sakes its all the shields, thats just wierd, 62,000 requests an hour
sounds like they need to be slapped
Rebooting them all
Germans are right now debating whether Elon did the "Hitlergruß". Can somebody tell me if the handguestore hand-to-heart-to-sky is a common thing in the US?
It isn’t.
I know it's politics but it's not about politics 😄
It’s absolutely a Nazi salute.
/end convo before it gets bad
State fact, stop convo.
MY JOB IS DONE HERE
i suspect that was a personal opinion and not an official one 🙂
There’s no support here - only chill. Come in, grab a drink, chat with your fellow community members! This is a space to talk to other smart home enthusiasts. If you’re looking for support and unsure where to go, check out https://discord.com/channels/330944238910963714/1284968640189304913 - it should help you find where you are going. No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
No politics, religion, or any other obviously contentious topics!
Yes. Though even if I state that blah blah my words are my own no one cares.
but you're my only gate to the US 😦
Words will still get you in trouble if you’re enough of a shithead!
Unlikely. I'm not in the US 
You are more than welcome to ping me these questions, I’ll allow you and you alone in this case. 😊
\o/
DM I mean.
Not a pass to talk about American idiots politics in the server. 
“Feel free to DM me” immediately bans
I was about to say, are you going to forbid us talking about you?
"This user is not on a server with you"
I GAVE PERMISSION I KNEW WHAT I WAS SAYING
....., I've avoided social media today for this reason,
DM to elevate becoming missys personal political rant chat
Good choice
I’ve avoided everything
Well there is that too
damn... when I do something like that it looks really chaotic for 5-8 weeks
They were gross (the right side hasn’t been wiped in this image).
Tips for doing this continuously for a random duration, let’s say 4 years?
I’m the person who needs to finish something they start when it comes to this.
Oh Missy you really need to clean your kitchen
Kids destroy kitchens
Uh I’d suggest doing this every 2 years if you cook a lot because that’s how long it’s been since I last did this.
What you need to do is buy an HVAC system with 20x the airflow your house actually needs.
Run the fans at 2-3% normally, but then crank it to 100% and just blow everything through the house.
well... thought this is normal for people and only god forgot to give me that skill back then
grubby hands, suggestion #1 is NEVER get stainless steel, espeically your fridge if you have kids
No, I’m the abnormal one in this case because I am deep cleaning while I do this.
There are no typos in my statement 😂
I’ve been doing this for a couple hours now, I regret everything and nothing at the same time.
you mean like those new toilets that get blasted after every use?
Umm respectfully, what the frick?
To expound on this - this is why I don’t like cleaning the kitchen. Cleaning the kitchen means move everything and wipe the counters down. No one else does this level of cleaning and it’s fucking gross to me.
So it turns into a whole day project because I let the others do dishes.
I mean in a good way 😄
We have a “blasting bowls” channel in a friend server of mine and it’s exactly what you think it’s about.
No pun intended -
Holy shit!
Oh I’ve seen these
The toilet rotating like it's the bookcase hiding a hidden room is hilarious to me for some reason
so my next floor will have holes for the HVAC system. it's actually a good idea.
public toilet...
people are weird when they're alone on the toilet apparently
The first 1,000 people to use the link will get a 1 month free trial of Skillshare https://skl.sh/hoog05239
This is a video on public urinals in Amsterdam. More specifically the plaskrul and the urilift, a urinal designed by a dutch company that comes out of the ground.
Also thanks to @NotJustBikes for the footage of the parking garages.
Maybe nobody cares about Amsterdam?
seen that – always good when you don't have to pee into the canal directly but it gets a 3 meter redirect 😄
i think they put some of those in london
doesnt always work out - https://www.bbc.co.uk/news/uk-england-london-64430454
bruv...
@iron granite can you add "deadly accidents" to the prohibited topics?
Deadly accidents keep my real life job safe.
Early 2000s PC Kid
Interview with 2000s PC Kid with Kai Lentit - aired on © The Computing Weekly, December 2003.
Y2K
Programmer humor
Programming jokes
Programming memes
Programming History
2000s computer
Websites 2002
MSN
AOL Instant Messenger
BitTorrent
Pirate Bay
Yahoo!
AIM
Computer History
Windows XP
that hits a bit hard
that musk salute thing was a little weird but that was not a nazi thing just a middle aged man too excited thing lol
a) posting a German website on an English focussed Discord isn't great.
b) it might be a satirical website, but this is getting too political now. Stop it.
language isn't a barrier in a browser, is it?
musk political? since when?
actually that may need to be a serious talk you mods need to have. the musk thing blurries the line too much
the musk salute at a political thing vs a musk salute at a spacex thing is just too complex to allow one but not the other etc lol
just use a bit of common sense
so refer to him as musk NOT the head of department of goverment effiency?
is that department even a real thing
I think you did nail that, so you are capable of doing that
f that.. should be able to bring up the musk salute regardless where he's standing
Unless you are starting a political discussion.
he's going to be even more in the limelight from here on out so musk will certianly be unavoidable to bring up
hell he's invaded gaming for f sake
the whole diablo 4 thing and whatever that new thing is
wdym invaded? he payed gamers to level up his accounts...
thats what some are saying
nah, it's pretty obvious.
he has to play some otherwise wtf is the point lol
not even I have the time to grind so much and I have all time in the world. and that guy has a ton of stuff to do/take care of and is definately not gaming all day 😄
You are not getting the point. It is not about Musk himself.
But if politics is discussed, where Musk is involved or political satire involving Musk is shared the line is crossed and the rules apply.
And those not sticking to the rules will face the consequences.
for me it's the proof he is a super fraudster
oh i dunno.. WoW people who worked full time jobs with kids got noticed on social media and did some accomplishements
we are talking about Number 1 in the ladder on hardcore.
not like it's not possible to do stuff
Elon played this character and got instadeath within a few minutes...
point is.. he's everywhere lol
The way he was talking about the game and that he literally had to read hover over labels to know what a button did is just the worst
lol
he maybe played a few hours D4. But he didn't PoE. 100%.
If you played a game for 100+ hours, you know what buttons do
maybe that's why he got appointed to head of efficiency? you ever think about that.. maybe he's showing the world what real efficiency looks like
the funny thing is: both his PoE chars dies during an live interview with a german ultra right wing woman he wanted to push
I'm amazed how you still turned this "no I'm not taking about politics- musk conversation" into politics
he already admited to having boosted chars in poe2, the question now is does GGG ban his account for breach of TOS or not
who cares tbh
they would just make their lives harder
But you didn't say president
banning him could have backlash for them but if they dont ban someone publically bragging about breaching the TOS then enforcing on others is a bad look. they are stuck between a rock and a hard place
your just mad he got his projector and you didn't
Are you talking about a tech billionaire gaming? Sure. Are you talking about that tech billionaire joining the government, that's politics.
well, the line is always on christmas eve when everybody is drunk and after a few minutes everybody is crying and fighting 😄 somewhere upfront is the line
talking about bridging a joke between two aspect of both
I'm not sure what this sentence means
prob due to snow..
bridging across the line
Holy shit I sounded like an AI there
thats ok.. i'm sure someone did
my AI would have lied to my face it had understood the sentence when it hasn't
I have had enough now, @forest edge .
You have been told multiple times, that we do not want politics here and you still talk about it?
You will get a 24h timeout now.
Sooooooo how about that weather, its -20F here tongiht(already -12)
@midnight adder same for you. After being told to stop, you continue with:
the funny thing is: both his PoE chars dies during an live interview with a german ultra right wing woman he wanted to push
Also a 24h timeout
They canceled school for our kids
Which given the windchills will be -35 to -40 yeah I don't blame them
2 C here so comparitivly toasty
fun thing, -40F is the same as -40C 😛
yup, thats the point where they meet 🙂
There is almost a 90 degree delta between outside temp and inside temp F
We have newer double pain(or is it pane) windows, that helps more then insultaiton, we have r52 in the attic
in the attic? r40+ is pretty common I thought
Helps with both heat and AC
My house was built in 60's so only r13ish in the wall(2x4s) and we added insulation in the attic
But we got new siding about 10 years ago, so we are totally wrapped which cuts down a lot on heat loss
eh
Google can address and change any setting on the tuya lights, but is a bit dumb a lot of the time. Alexa can change Most settings but can't change the color temperature because it doesn't know what that means. Home assistant can change the brightness And That's It.
Mind you this is for RGB lights.
So it's weird that the relatively universal RGB codes that tuya uses(and that everyone else can use for some reason), nothing else can.
that might not have made sense, but yeah, you get the idea.
Also it doesn't feel like a tuya thing, alexa's color temp thing extends to other brands too, infuriatingly.
My outdoor lights are Tuya, but surprisingly they work just fine other then neeeding to reboot my router every 1month or so otherwise they drop
Oh the wifi on tuya stuff is amazeballs.
They connect fast, the, to borrow a quote from that one dorky game CEO, "They just work"
The problem is that everything that interacts with them is missing Something.
And it's weird to me that Amazon of all people can't dedicate five minutes to telling their smart home control what Color Temperature means. I get that HA is gonna be feature-spotty in some cases(no color temp controls, no color controls, etc) because it's open source, but zondongers are getting money for it, they've got no excuse. 😛
Though I did just have a silly thought.... home assistant local hooks for aura sync would be amusing.
wait hang on, I think I might be on to something with that.
How about instead of needing specialized HDMI-hooked LED strips for backlighting your TV with that extended color effect, you just have a local hook that tells HA what the screen is doing in simplified ways and sends that to an LED strip of choice?
Might not work for TVs, but it might be a way to extend the usefulness of wifi strips for monitor support on PCs and the like.
Though in theory you could also hook it to broadcasted things too...
BLAH. Stop it, brain. I clearly need to do something else like eat or something instead of letting my brain do a mischief. XD
mood tho.
The biggest double edged sword skill.
Cleanest you will ever see everything without using meth but never remember to pull the focus away.
lol so you can see my wall-o-text and see exactly the path my brain took, too, huh. XD
Yes absolutely lol.
I have to clean the kitchen cabinets' tops, too. But I think I keep that for the traditional spring cleaning session.
Get a rotary brush kit. Snaps into your existing drill, turns cleaning countertops into a real short exercise.
Spray cleaner, wait a few minutes, grab drill with brush, WRRRRRRRRRRRRRRRRRR, wipe with paper towel, donezo.
Oh god don't say ryobi to me right now XD
I need a new drill. All my drills are older B&D models. Two out of the three of them keep trying to catch fire. And of the five batteries I have, only one holds a charge.
I have THREE high capacity ryobi batteries for those nice brushless drills they have.
Do I have the money for a new drill even though it's only a bit over 50 bucks? I do not. XD
The cool thing about the brush kit is that they go on any drill, it's just a hex shank.
So no single use tools there. XD
I've somehow ended up with a ludicrous pile of DeWalt batteries. They kept having mail-in redemptions.
Have 2x 3Ah, 6x 5Ah 18V, and then 1x 6Ah and 4x 9Ah of the 18/54V ones
I'm a reviewer. Ryobi batteries keep coming up.
Well.. Third party ryobi batteries, but still.
Counterpoint.
It's ten bucks, you get lots of brushes, and again, they attach to whatever drill you've got.
Though I can't decide if the company name is "Hoe Like Me" or "Hoe, Lick Me", and that amuses me.
I also have a cordless angle grinder that is fair game for certain kinds of brushes 😄
But it does something like 9500rpm, where the drills usually top out around 3000
"Do ya wanna clean the counter or do ya wanna make the countertop go away."
What could possibly go wrong: https://www.amazon.com/dp/B00I8YDVD8
The Drillbrush Industrial line of professional grade cleaning tools are built to meet or exceed contractor standards. The Medium Yellow 7-inch brush was designed with the professional in mind to get any scrubbing task done faster and better. Popular with general contractors, auto reconditioners, ...
My espresso machine broke Friday. I just got word that it’ll be 3 weeks minimum before it’s fixed 😬
I no! Time to buy a backup one!
I floated that to my wife, she was not in favor of that plan 😂
fix it then!
What happened?
The steam wand cracked. I have zero clue how. It’s steel.
Nice. Yeah, I’d assume so knowing your love for coffee. But also didn’t want to assume. 😂
Soooo, we might be closing on a house, is there a good list of "HA" stuff to do before moving in?
Make sure the light switches have neutrals in the box
from a purely nerd perspective wire up each room with a network drop, as wifi sucks
... or use real wifi points
that aren't shit.
because wifi7 can smoke gigabit 😄
and cat6 can do 10gbit, but I agree, I'm just a fan of hardwiring anythign I can
when possible that is.
Which is why I have a 5 foot long drill bit...
if you've got an attic or basement its significantly easier and all.
sigh its now -18F at my house right now, there is a 86 degree difference between outside and inside lol ick
Whats a real wifi point example?
unifi or similar stuff in that price/feature range
proper wifi-7 and etc.
not the mesh crap that most places will try and sell and etc. 🤷♂️
(not that they can't mesh, they can; just better usually.)
i.e.the main feature of good wifi is the wired backend 😂
Unifi is better than Asus?
yes
"What is better than asus" is a rather long list these days with how that company treats its customers.
😄
either that or a real good multi-band wifi backhaul.. but yes optimally hardwire
I also don't see the point of wifi7 while the upcharge is so big
Unless you have clients that support it, need it, and aren't stationary
well the point of most of those points is also that they're good at spreading out clients too 🤷♂️
tho the price premium isnt.. that big these days
Is that because of the quality of the product or the customer service?
https://store.ui.com/us/en/category/all-unifi-cloud-gateways/products/ux
Like.. you can get a mini-gateway with wifi6 ap for 149$ these days? 🤷♂️
I am curious because I have used asus a long time and always been happy, but I am happy to abandon for better tech
unify calling a 2x2 switch 6 spatial streams because it's triband
For a moment I was surprised by the price
https://www.reddit.com/r/pcgaming/comments/1cpbsu7/asus_in_trouble_again_trying_to_scam_customers/
They did a lot of recent scammy bullshit to try and fuck customers on their products/money
like
"Pay us or else we're sending it back disassembled."
sort of scammy shit
Yes, that is dual band 6
I had an ASUS laptop once.. its support was great.
Then I had a second; and it was very much fucking not.
so im trying to get into fiber, as the network lines i am running need to both be over 300 feet long, and buried right over a high amp (120a) line.
are these 2 things compatible?
never really touched fiber before
Probably not, but not enough information to say conclusively
Blue plugs usually means singlemode (OS2, 9/125) fibre
Those transceivers are multimode (OM3/OM4, 50/125)
yeah im trying to figure out what set i need
or even if multimode or singlemode is what i really need
Either's fine. But you can't damage your eyesight with multimode so it's probably a better choice for a newbie?
A singlemode 1Gbps transceiver would be "LX" rather than those "SX" ones
Well something has to change; either you need SX transceivers + OM3 fibre, or LX + OS2.
i recognize those as words, but no clue what they mean
or hell, is there a way to get ethernet to work
Nope, put that out of mind
You're clearly talking about different buildings (and you've already said it's running next to power), you do not want conductive cable
As for that cable, you might want to consider a 3mm armoured cable instead of that 2mm one
Bit more expensive, but not extortionally so
And it comes with a handy loop to help with pulling it through the conduit I presume you must have
yeah
expense is more when theres $200 cables
i accept fiber costs far more
and the pulling eye is nice but not required
also whats the max i can bend this stuff?
its converter on the existing structure is fairly limited in its placement
not sure why there are two numbers, but "10D" means 10x the cable diameter, ie 30mm
those SFP's say 550m
you will blow shit out, probably.
so its too over powered?
so really flexible?
It does matter yes, you do want one that is rated for "about" the length. At least I assume so.
like im trying to put it through mortar and 2x6 wall
probably not something that is like.. several times over the length you need
I've never seen a multimode SFP that didn't have a maximum transmit power equal to its receiver overload power. You could plug most of them into each other with a 0.3 metre fibre and they'd work
It's just about only a problem with >=40km transceivers
I am corrected then, was making wrong assumptions then 😄
It's a genuine concern, just probably not with any of this gear
so the cable you linked and the converters i shared would be enough?
and cable bends enough i dont need to use special elbow joints?
within reason, I think?
im not bending it
like... you don't want to yank it tightly around a sharp 90 or something
yeah i can hand lay the whole thing
i dont need to fish it through anything but the house wall on the existing structure
the destination structure isnt even finished yet
we juust poured concrete saturday
Tbh.
I would just install some conduit then? 😄
i got TONS of conduit
then.. fuck it we ball
go run some conduit; put whatever wire through you need later.. 🤣
Here's the spec sheet for the transceiver, to the point I was making about the light level:
https://doc.10gtek.com/file/file/20240815/43e40afbc32417bebd444d7f68f06222.pdf
These two (highlighted) numbers are the same, which means if you connect two of those together, one can't possibly overload the other (no matter how short the cable is)
Multimode might be generally pretty limiting, but it sure is easy
so, as long as these are the end units, with a single cable between them, theres no overload?
Yep, absolutely golden
tbh long as i get near my 1gigbit speeds im happy
i know the ethernet cable inside the house is the weak point, but its actually only a 12% speed reduction
I mean.. throw in cat6a.. and you're mostly-future-proof within house-sizes usually.
man I wish I couldve had cat5 in this house.
just dialup and sporadic cat5/6 drops around long areas where I could do in fully finished house.. not ideal.. 😐
cousins redid their house;s o I went there and put in a few lines including a cross-house backhaul for wifi mesh point stuff..
lucky having an open ceiling in entire basement for that..
oh i know. i used to have DSL
luckily router and most PC's were in the same room or shared a wall
then a nice wifi router covered most of the rest
$200 for gigbit networking speeds isnt a bad deal
not too bad no; and basically.. while I dont entirely like the google wifi/eero/etc all those individual brand stuff instead of a proper network vendor stuff..
it still works better than the manufactured e-waste that is most ISP-provided hardware
one of them is a def meant for indoors wifi extender thats been in my garage for 4 years and still chugging
poor little bit of tech
i am... rough
on my stuff
you really shouldn't be able to harm wifi stuff by being "rough"
i used to have a major HDD failure in my laptops every year, so one lasting 2-3 years was a wild thing
oh it gets repeatedly wacked with the lawnmower
yeah I'm working towards setting up a proper NAS soon.. just waiting for my
.. why would a wifi point be near being whacked by anything?
thats the only outlet near where the wifi needed to be projected
and happens to be in the corner of the garage the mower is parked
its survived so far
now im going to replace that with a proper electrical box higher up out of the way to hold the converter things
I mean.. converter? 🤔 ah
another switch with a 10g SFP+ and maybe some 2.5g outputs or something
the ethernet to fiber
10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way ...
was more saying "use a regular switch" on either end
🤷♂️
and by regular switch I mean like.. some of the cheaper stuff thats like.. 4x 2.5g and 1x SFP+ 10g uplink port
it won't really matter on the other end. 😛
I mean.. definitely conduit in the ground
can always run other wires or etc later if need be. 🤷♂️
or bury another wire.
😂
we have found 2 different pipes, and 3 electrical runs we didnt even know existed, or WHERE they went
and likely more when they get to trenching this stuff
yeah, fun stuff to go trenching and not know what you'll hit.
downside of old houses that were owned by general contractors
we know where everything we want to not break is
but theres a bunch of other stuff
id love to see what our yards look like to ground radar
theres at least 8 different internet cables in the front yard
every time there was a network problem before it got to the house they simply laid and burried new cable
yeah actually ended up severing a fios cable on property I worked on once because there were no markings and it was like..
surface-level in a place or two
like.. the fuck? 😐
ours were like just 4 inches down
lazy.. 😐
I mean.. It would if you added a switch outside the trench on either side probably?
theres also the conduction of 120amp cable within 6 inches
shielded cat6a wouldn't care terribly much if properly terminated
at least not at 1g anyways 😄
interestingly thats what i bought
EXCEPT
when i plugged everything in before laying it... i only got 10% of the inbound speed
normal speed:
250 feet of shielded Cat6
maybe a POE would help
but wouldnt i need one on BOTH ends
... shielding properly terminated?
yeah
and also.. if its in a coil on the ground.. all in one place
that is basically forming a big inductor that probably didnt help
I mean.. maybe?
but like..
lay conduit.
then you can put wahtever cable you feel like in the thing? 🤷♂️
true. but wouldnt i also need a pull through string in place too?
a pull cord? yeah, ideally.
why not get what i need, then lay it inside a conduit at the same time
🤷♂️ I'd have a pull cord too just in case.
dunno if it will be the right size
i have 1 inch and 3 inch conduit
3 inch conduit is... a pain to terminate
1inch can fit enough..
thats wide enough for a multimode fiber with a cover/pull thing and a pull cord beside it or such..
Youy could do 3inch if you really have that much spare conduit to burn. 🤣
i do
the previous home owner left like multiple semi loads full on the land
weve been using it for DIY projects for years
2 feet
direct burial or conduit either way works then; probably. 😛
depending on the cable they bring.
the only downside is that theres a non zero chance you will encounter a cottonmouth or a rat snake when recovering the conduit we have
rats too
i caught one as a kid, and kept it in an old fish tank on the porch
till it froze to death that winter
hah
tbh theres stuff back there we are still finding
few years ago i found half a ton of aluminum wire
all 1 inch
sold it for like $600
😂
tbh if i had found a contractor, i could probably have gotten WAYYY more
with wire that thick? Probably.
600$ was a scam then yes.
maybe?
🤔
I'd have to know the actual gauge to know for sure.
then again alu cheaper than copper yba lot so maybe theres that
1
2
3
was stranded on the 1 inch, and solid on the 1/4 inch stuff
A burning house does count as heated.
Well, it does, briefly
“Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life.”
― Terry Pratchett, Jingo
And a few hours afterwards, depending on ambient conditions

It’s -3 here but that’s also in C. 😂
Below freezing is still weird for my area.
😂
Negatives in C just means it’s below freezing, that’s all you need to know. 
see, it makes perfect sense, ADMIT IT
To get a ballpark, I add 10 and multiply by 2 and get close to the actual temp in F.
Not perfect, but good enough.
Yes I’m an American who uses C, most of my colleagues and community do. 😂
Wanna know what’s fun? The 3 weeks of hell in the beginning of the year when daylight saving is different between EU and America and Google Suite fucks all our meetings.
Move to EU?
That’s the eventual plan!
I think one of those area's in Italy where they will basically sell you land and an old house for dirt cheap, to bad everythign is so expesnive there
We have pretty much run out of space here, unless you have $$$$$
I think Japan would be interesting too, they have demographic issues
Lets hope there are no trump profile presidents in europe when you want to come over.
Not unless I want to move into the boonies. 😂
(Also, the cost of living is much better there.)
Which boonies do you mean? 😂
Boonies
What a strange word
Hey guys, I haven't been on this server for a while and it looks like things have been rearranged a bit.
I thought there used to be a channel that was semi-dedicated to frigate and it's integration into HA. Where should I ask some questions about that setup now?
Ok. I was hoping form more of a chat and not just putting a post up, but i'll give it a whirl.
I started having it track cars, but it is non-stop tracking the car parked in the driveway. I feel like there must be a way to not have it track constantly, just if it moves. But, I'll give the documentation another gander and see what I missed,
Like...the border of Germany. 
I would just really love to move into northern Canada and be done with all humans. Go live like the indigenous. Ignore everything else. No one likes the cold.



