#the-water-cooler
1 messages ยท Page 47 of 1
Even i only use 10G between my storage and lab nodes
Everything else is 1G
Albeit , i have 8 NICs on my router, 8 on my lab and 6 on my production node
sounds about right
well that was my plan to with high speed between storage and lab, though on drives in storage its limited how much you can upload in speed
nics galore
I guess my storage gives maximum 30MB/s on the drives over network
slow storage eh
that's also 80+ instances of spinning rust though
I think I will go with the mikrotik with 12 10g slots for now, and use the unifi for the rest. The unifi router is gone, so its just the unifi switch left (24 ports)
yesh
I have 16 spare 2TB SSDs though
@clear ferry do you think its possible to push 10gbit out of the ali router if I plug a 10g m2 to rj adapter in it?
I'm getting 24 more soon probably
No need to route 10G on sense
I just have one NVME that takes the things that need fast things like databases
slowly moving to nvme
I guess we wont get 10G internet soon. At least I have 2.5 ports in the one I bought. I bet they will push a version with sfp soon
most of my stuff dosn't have it though
On the lab I working on setting up I use a TB nvme for proxmox and core files, and a ZFS pool on some 2TB SSD drives on each node
Only thing it didnt seem like it was possible to install proxmox on a NVME with ZFS during install as it want to drives
m710q hitting 9w on idle; wonder if I can scrape it down a few more
with frigate running on 4 cameras
I might throw one more node into the cluster that got a 11-13th gen cpu cause of plex and 4K transcoding. older cpu cant do proper HDR
13th gen is nice and fast
6th gen is still plenty good for me
for ha yeah 6th gen is plenty
proxmox
laughs in 2600k
with gameservers, jellyfin & ha
6th gen cant do proper transcoding
why
I hear 12th gen is better than 13th gen on transcoding
my clients can do transcoding just fine ๐คท
@finite atlas cant use quicksync for HDR in 4K. It came on 7th
it's not the transcoding it's the file formats each gen does. earlier architecture didn't support encoding on some formats
more likely jellyfin
But at the end of the day, it's what the hardware engine supports
well, it does transcode 4k hdr h265 content at 27 fps
more than the playback 24 fps
ยฏ_(ใ)_/ยฏ
but missing encoding for the best quality, so you loose a lot quality
not saying it wont work
but just less quality
not really loosing much quality
that I wont argue
native and transcoded look very similar
if not needing the gpu though 6th gen is good
all my clusters are four 6gen I7 and they will do fine for everything else at least
and beat raspi pi's by miles
true
https://linrunner.de/tlp/index.html seems good for power savinghs
I have still to use GPU transcode after 12 years of plex
upgrade your hardware your playing on?
I've been running apple tv for the last 7 years probably, with a stint of Roku
in what? the pi's hwaccel for video is legit
apple tv is not the best for direct stream though, unless you use infuse player
shield is good at direct
can't watch some things HDR on my older tv cause it gets too dark. thankfully the plex transcoding lightens it up lol
when I realize the Local Calendar integration is storing data in ICS format
But in order to read ICS canendar from url I have to use hacs component
LOL
I just reinstalled the four nodes and running zfs now gives some benefits at least
@green inlet totally worth it!
compressed this down to 70mb, the original 5k is > 2gb
https://streamable.com/meqrng
I need to learn color grading
What drone is that?
is it concidered good to use a sudo admin user in LXC or should root be used? I kinda want to use admin and bind the id to the same id as my server for easier nfs rights
Also any tips on how to get the hostnames in proxmox to register in opnsense? I have registred lan.domain.tld as dns search domain in opnsense, and proxmox, but I cant ping say ansible.lan.domain.tld and get local ip. Should not unbound be able to resolve that by itself?
yeah, but I use static ip in proxmox
lxc is not too bad for simple things that you dont need a full overlay. easier to pass and share gpu
lxc is great
I want to try to run docker on lxc to utilize the zfs benefits on docker
seem like its working well for other people
thats how i do it aswell, works very well indeed
do you have to run it privileged? I had issues with nfs in unprivileged
I like to mount nfs to be able to reuse profiles, tools, centralised configuration and such (like docker compose I never store locally, just mount)
Very nice. I am on the frontend of drones and photography. I have a couple options I am looking at for employment. Figure it all out so I can pick your brain ๐
I may be wrong but I think my Tuya contract is ending?
Is there truly no option to get a gaming laptop that doesn't suck with a optical drive directly from a manufacturer?
I think some of the alienware laptops still have bluray drives
a thinkpad from 2008
I don't even see sd card slots on gaming laptops any more
you can play tetris and minesweeper
Rly?
but besides my joke answers, i have not found any modern ones
why do you need a internal optical drive anyway, cant it be a external one?
I already have external options. That's not ideal
yea many of them are still beefy enough in size to have room for them. your better off getting an external drive though imo
I only find Laptops with a optical drive, but without a dedicated gpu.
Directly from a mfr?
mfr?
I'm all ears
Manufacturer
why isn't an external drive an option?
dongles are no fun to be carried around
why would you want to carry around all the weight needed to house an internal one
always seemed to me in the past the pc outlasted the drive so I could totally see the shift from them removing them internally
There are a number of reasons but one of them yes. Is dongles
Dongles is just one of the reasons
That's a big one though
you can 3d print a casing for the external to mount on the bottom of the laptop with a super short usb cable then it wouldn't be so much a dongle lol
What do you need a optical drive for anyways nowdays?
Critical backups for one
To high a risk
๐คจ
Flash media can't be trusted for super sensitive stuff
alright, you do you
Cloud is no good for same reasons
but i'd trust a good m.2 over a cd any day
Newer optical media lasts far longer than a standard disc
they do make longer lasting ones but really good ole fashion tape drives would last longer but aside from that, data on disk last a whole lot longer, espeically disc that are not always running
See mdrive disks (optical) and similar
do you really need centuries?
i'm not questioning the reasoning behind it, but what is of such importance to you, that you care that much?
Sensitive client documents that need to be archived and can't be uploaded to the cloud
Then there is a entire sub category that goes along with that I won't get into
so you don't need a gaming laptop then
you just need a buisness laptop
hell you can buy any turd with an older i7 and it would do what you need to do in the form of media burning
or even an i5
I already gave him a good source for non-gaming Laptops with a optical drive.
NEIN
When are raspberries available again
Had to post this to our internal slack
We just got a mail from the CEO that we should be more in the office, although all employees have signed a WFH deal

Supermarkets might have some raspberries ๐
My company promotes wfh where possible
Not that my project allows that unfortunately
Yeah, WFH life, i get so much more done
I was 29 days in the office or customer sites last year
I only need a fraction of my work stuff at home
We work with industrial robots. I can't even put a single one here D:
I do need to ask my manager if anyone would notice if one of the effectively decommissioned control nodes made it into my home office though D:
Do it
I was a total of 3 days in the office the last 1,5 years
2 times i caught something there and got a cold afterwards
Needs a hazard bonus for me to come again
wtf.. you are either getting too close to other people or maybe slow down on the urge the lick the toilets
I haven't caught the common cold in over 20 years
If our cost cuttings reduce the food so I'm not better fed when I'm in the office than home, I'll stop coming on a regular schedule as well ๐
I made a lot of our work remote (for me and 1 other person, people can't remote in but us 2) and work from home when I can
That was after I heard from my boss (whilst remoting into a system from our office) "shouldn't you be out working"
LOL fuck off
Some people are just so detached from reality
They don't even hve doormats
I love using the pointless meetings to do actual customer work while listening to the meeting
oh, you have TownHalls as well? ๐
maybe he was referring to your second job that involves running up trees to escape from predators
They don't know about my side gig, afaik
I am saving that ๐
Same here
Had a day wfh last week, got more done than I did the entire week lol
Our office has timtams, great snacks to have lol
we have fruit, snacks, 3 warm meals a day and some cakes so the coffee isn't too lonely
Yeah we get all that but the warm meals
I only really have the tim tams though lol
Yeah, we have fresh fruit every day, nuts, crackers, coffee, soda, beer, yogurts, and juice readily available
Plus subsidized canteen
Pay โฌ4 to eat as much as we want
But I can charge any meal any time anyway anywhere
Lol we don't get soft drinks, beer, or juice
Jealous of that part
But we get milk, coffee, hot chocolate, crackers, Tim Tams, lollys, fresh fruit, and if you can be bothered - steam dumplings (have frozen ones in the freezer)
Not bad for an office of 10-20 people max
Is there truly no option to get a gaming laptop that doesn't suck with a optical drive directly from a manufacturer?
Gaming and or business
Well someone did post a link to manufacturers with drives
Yuck gaming laptop
But also, most people have swapped to things like USB, cloud, network storage, or other storage methods instead of CDs
Also, who needs an optical drive?
Apparently they have sensitive client data that can only be stored on CD-r
I haven't used one privately in close to 10 years
Use them for hpux installs still
But that is an archeic Unix system
Even for sensitive data at work it's stored on network shares or cloud
Yes but they do not fit my needs, they do not keep fresh like over a few days if i screw them to my speakers
there is truly no option
Remember to buy hemorrhoid cream
Sure, when should i remember you?
Reminder set for 40 years
500โฌ shopping cart D:
Went for 2200kr after we took some more groceries
We found a option.
Minecraft okay but friends? ๐คฎ
^^
link?
Links are for the open minded.
then send me a fax
What's your fax number?
Forget the X, we've got C, T, S! It's a machine that sends you all the facts you need!
SUBSCRIBE: http://bit.ly/AdultSwimSubscribe
About Tim and Eric Awesome Show, Great Job!:
Tim and Eric Awesome Show, Great Job! is Adult Swim's number one gross-out comedy fever dream viewing experience. Tim Heidecker and Eric Wareheim are joined by special g...
Sure number?
+49 161 234 4465
Can anyone spot the raccoon?
My tablet mount and layout finally coming along pretty ๐ฅน
is that map a weather radar?
That's cool. I ordered one of https://de.aliexpress.com/item/1005004952726089.html?spm=a2g0o.productlist.main.1.144b5ad8O7Yp1Z&algo_pvid=19a5ff91-0e9b-4bab-aa2a-809592ba9442 though my plans are a bit simpler
I'm using a Samsung Galaxy tab A8 I'm still designing the right mount for it. I want to be able to take off the tablet of the wall and use it just as a tablet
I have an S6 Lite. But I actually tend to carry that around
But but. That's not a touch screen
does android usually know about usb-c hdmi outputs? so I can use any generic adapter?
Neither my phone nor my tablet do something with the screen when I plug them into my dock
what is needed to make this work?
Don't need a touch screen when stuff automates itself, outside of volume
Depends on phone, not all do hdmi out
My old Samsung a71 did nothing
My Huawei p20 pro gave me a full desktop
My OnePlus 8 pro is.. half usable
didn't you have to use dex for older samsung phones?
I never used mine, just remember there being like a dex mode or something for the mirroring thing to even work at all
android you weirdo
Well, more like the vendors don't implement the chip
So nothing is wired to the pins
Cost etc
I have a proxmox server and its working wonders. However I am about to add two servers into the mix. Each has dual 10 core xeons and 256 gig ram. Should I stick with proxmox? Ive been slightly leaning towards docker lately and all that.
You can run docker ontop of proxmox.
I could. I feel that makes the install a little more complicated in regards to troubleshooting.
How?
It depends. Are we talking of a vm with proxmox on the host? Or incorporating proxmox directly into the host os?
Just install docker on proxmox. I run a container with docker inside it.
Proxmox is debian-based, it can run docker
Make a LXC Container where you run all your dockers in.
Messing directly with the host OS gets messy quick and VM's kinda hits in performance a bit.
You knowingly bought a chinaphoneTM? What kinda sysadmin does that?!
I remember having this conversation in this channel lol https://youtube.com/shorts/4UiQ7_dVgPA?feature=share
A 60-second primer on why many American houses are built with wood.
Subscribe to my channel: https://www.youtube.com/channel/UCqabPJa-N6ORAlO5yMBtWXg?sub_confirmation=1
โ Support me on Patreon: https://www.patreon.com/LostinthePond
โ Follow me on Twitter: https://twitter.com/LostInThePondUS
โ Follow me on Instagram: https://www.instagram.com/l...
Best phone i ever had
Yuck
VM performance hit on CPU bound problems is overrated IMO
on IO bound not so much, but ehh
Biggest issue is usually people don't understand how VM schedulers work
And just assume more virtual resources are better
wdym scheduler? inside the VM, or the scheduler on the hypervisor scheduling the VMs ๐ค
The hypervisor
that mostly just schedules userspace processes that map to the CPUs inside the MV ๐คท
Yes, and people think that adding 4vcpus will be 4x faster than 1vcpu, it seldom is unless it is a single VM system
Hello everyone , I'm a design student who's doing a research on user experience of home automation platforms. I'd really appreciate If you could fill out this form, it will only take maximum 5 minutes. If you have any specific problems or additional advice on how to improve the experience of using those platforms feel free to reply, those would also be of grate value for my studies. Thank you everyone in advance.
As a design student, I am conducting a survey to gain insights into the frustrations and needs of users of Home Automation platforms such as Apple HomeKit, Google Home, Home Assistant, Samsung SmartThings etc. Your participation in this survey will help me understand how to create designs that cater to your needs and improve your experience with...
Hey dont call my Minecraft single threaded.
The game thread and chat thread are separated from each other!
Lร L
Lol
Like most games though, all using a single thread lol
Whats up with all those trash spam surveys lately?
I got a bunch of (correct but almost useless) typo fix PRs on github recently
I wonder if there's some new engagement "scam" lately for students or to get free stuff somewhere
i'm just trying to do my homework ๐ฆ
Homework of today: Go spam your questions online?
no i have to do a survey to understand the potential users of those platforms. i was assigned to do a user survey
i dont know anyone in my country who uses home automation platforms so i'm posting it here
actually i'm also going to conduct some interviews if you'd like to talk for a little i'd greatly appreciate it
i'd also love to see if anyone would volunteer to test my designs that would also help a lot
Not uncommon for lazy assignments to be "go collect surveys" that aren't checked or verified to be decent surveys
Also with this, I'm sure plenty do use it. Whether it's google home, apple Homekit, Amazons alexa, or even home assistant
Since I can guarantee you at least one of those 4 are available in your country
Also proof reading surveys to ensure there's valid questions on each step is important too
okay, thanks a lot i'll fix it
That was what I wanted, and it works ๐คฉ its not hdmi but usb and screencasting over tcp. DJI wants 900$ more for the pro controller with hdmiโฆ lol nope
https://github.com/Genymobile/scrcpy is awesome
you guys can surely tell me how I can use adb on a different machine now ?
looks to me it generates ~/.android/adbkey on my local machine, where do I copy public keys on a android?
Im not sure if ZFS on the proxmox filesystem was the most clever thing to do :/
Zfs is quite nice
If you know what you are doing
Proxmox on the other hand

@last cedar
well proxmox is hitting the disk in an extreme level since I cluster it
dont think it is good for the disk
I'm slightly annoyed that ZFS doesn't allow to set level of redundancy on a volume level
Well, synchronous writes will be instant probably
You can do that with snapraid+mergerfs
pretty sure btrfs allows for that as well ๐
but btrfs tends to break in stupid ways
I see some run a base volume on ext4 for proxmox files, ram on logging, and zfs on the rest of the drive for vm
Question 1: true or false
Leaves are not actually moved by the wind, but fear of meeting the thing that creates the driving force of wind causes them to move, due to an inbuilt self protection mechanism called gerbilisation.
I'll say, flue
ZFS is not the best OS filesystem I've found.
yeah I agree, so will probably split up the filesystem to its own volume
the OS fs I mean
Zfs is great for os level with three way mirrors
There's some conditions where it wants you to poke at the FS before mounting that can be triggered by unexpected power losses that will pause a boot I don't like. Makes it a pita to get into systems without IPMI
But I do prefer lvm
Yea, xfs or ext4 on lvm will boot way more reliably.
Zfs snapshotting is also superior, especially for os drives
true, if you have enterprise drives
is LVM snapshotting COW?
tried cephfs for the vm, but that would kill my drives in a week haha
Never used it but I think so
Doesn't matter
I wouldn't run Ceph unless you have a decent number of drives to store on. It's speed is pretty related to how many disks there are.
why would cephfs kill your drives?
all the i/o from the syncing
Ceph makes no sense in homelab tbh, unless for testing
Ceph will tear through SSD life
no idea if glusterfs is better or not for that
Clustered filesystems in general add a lot of overhead and time spent to maintain.
is it any point running zfs on any proxmox drives if I dont really use snapshots etc?
Sure, bitrot, and no hardware raid dependency
Redundancy
But proxmox sucks already so
An opinion I see you regularly share but never back up
I agree proxmox sucks, but exi is licensed for the useful features
proxmox is ok. atx just hates everything that's not enterprise
atx hate everything like a 14 year old pubertal boy
The things atx hate seem so arbitrary.
Hey, I love debian
not RHEL?
We've been using Alma instead of Rocky at work
I should use ubuntu since atx hate it
The whole Redhat ecosystem always seemed like such a scam.
I was 100% RHEL before. didnt touch debian or ubuntu
The OS is fine, and the free versions like CentOS and Rocky/Alma are decent to work with, but the licensing and support costs around official RHEL always seemed absurdly high.
Redhat always struck me as a company that wanted to profit off of FOSS and give as little as possible back.
I got a bit scared with the centos chaos
That was all really stupid.
I don't understand what that gained for redhat other than pushing people that much further from their brand.
I actually stopped using centos when that happened
Yea, we started a full-speed transition to Debian at work over it.
And are using alma in the meantime
I started using centos a month before its death got announced
it was fun while it lasted
Lol. We had just started deploying Centos 8 when that all went down.
We'd been on CentOS since 5
talk about shooting themself in the foot
All my HPC customers have been using centos since 2014
They are all now leaving for rocky
That would be most of the HPC environment in Scandinavia
Probably similar for northern Europe
Have you started using IPV6, @clear ferry ?
I've used ipv6 for 23 years in some degree
But I'm actually attending a ipv6 training next week
I thought you said you disabled ipv6 on your homenet
This is an absolutely incredible video.
Hinton: โThat's an issue, right. We have to think hard about how to control that.โ
Reporter: โCan we?โ
Hinton: โWe don't know. We haven't been there yet. But we can try!โ
Reporter: โThat seems kind of concerning?โ
Hinton: โUh, yes!โ
Not at all concerning
I may have been watching some Yudkowsky interviews lately. If people have convincing arguments why we are not fucked, I'd love to hear them ๐
Now that Finland are joining NATO,maybe I'll be coming to visit more often @orchid rose

Getting nuked was always the least of your problems here
Well, more that it opens up for more work for me
Not a fear of being nuked
Btw, are you close to Kajaani?
Hopefully the recent changes will allow more investment in the country
Kajaani is in the middle of nowhere. I technically live in a city
My dude, the weather this year. Just right
Snow but not cold, how much more can a man ask for
I've been talking a lot to EU datacenter companies too
Everyone is looking to the Nordics
Norway, Sweden, Finland is basically air cooled DCs 365 days a year
Everyone wants to move to the financially/politically/thermal/power stable region
And on top of the free cooling, land up north is dirt cheap
Yes
Green mountain is building a pretty cool datacenter now for tik tok, 6x 30MW buildings with options to expand to 6x 150MW
And Lefdal Mine is pretty cool using sea water to cool and using the heated sea water to breed fish
In American scale units
Unfair flex. That sounds pretty awesome
Such a pretty country if we go by geography alone
If I didn't have kids I'd bother doing more travel for work, i get a lot of random requests around the globe, if they let me move to the frozen north I'll probably do it
Still got snow?
Yes, melting fast here in the south
Will probably be gone by weekend
Up north, quite a bit more
Slush don't count smh
<imagines some Total Recall-like button that melts the ice>
LOL
Reminds me, I should rewatch total recall
It is a great movie
Dataisbeautiful is probably one of my favorite subreddits
Without reference, yikes
To be fair, we are probably the same from food to car
But we don't have the top four bars
pretty cool data, i plugged the way that i calculate color temperature on my esphome bulbs into a template sensor and i'm able to watch it over time
along with a slightly less nice looking sun elevation graph lol
You need since anti aliasing on that second graph
@last cedar apparently when you play this song outside racoons will come out of the woodwork to hang around https://youtu.be/uq-gYOrU8bA
Official video for "You Can Call Me Al" by Paul Simon
Listen to Paul Simon: https://paulsimon.lnk.to/listenYD
Subscribe to the official Paul Simon YouTube channel: https://paulsimon.lnk.to/subscribeYD
Watch more Paul Simon videos: https://paulsimon.lnk.to/listenYD/youtube
Follow Paul Simon:
Facebook: https://paulsimon.lnk.to/_followFI
Instagr...
I understand why, it is a banging tune@forest edge
Nice my authentik PR was merged
https://github.com/goauthentik/authentik/pull/5138
if you have a terrestrial usb receiver and a rpi you can make yourself a feeder for flightradar24 and get a free business account (499/yr)
I should do that
Need to know what to buy
attach a microphone and you can run a birdnetpi on the same pi
this is my station https://app.birdweather.com/stations/721
as you can see, no pigeons anymore. the laser works ๐
Ooh never heard of birdnetpi
Now very tempted by it
Though I would prefer to put a mic outaide where having a pi would not be ideal (unless I can get a wireless mic lol)
run the wire through a window or something.. it's a mic cable.. they smoosh and not expensive to replace if you cut it or something
hell they make extension cords designed to be smashed by closedf windows and doors.. pretty sure a mic cable can handle it
I would say, who the hell listens to bird chirps? but my grandfather was all into that shit.. even had clocks that made bird chirps on the hour lol
Would look decently ugly but maybe
I would just have it recording because im curious lol
on the site I didn't see where it was sound actived.. if it was then i could see alternative uses for it
I gotta say, the Reolink support team is insanely helpful. I just wish they didn't have a measly 30 day return policy
Why was the fan not on?
that's hvac condenser they only turn on when heat needs to be dissipated
or if the racoon had wandered into it lol
Rodent spin fan round round right round?
I would have like to have been wafted a little when I waddled past
more like
Lets see what these can do
you know when you reply to someone it makes that whole image yellow and completely ruins the transparency part lol
sounds like a you problem to me
there you go
I wonder if it ended up whole or purรฉed
shop vac's generally have an angled inlet so it certainly broke in 2 or more pieces
This brit is answering all kinds of questions asked in this channel lol https://youtube.com/shorts/URm-P-L_OBY?feature=share
Here's a one-minute primer on why Americans refer to petrol (British English) as gas.
Subscribe to my channel: https://www.youtube.com/channel/UCqabPJa-N6ORAlO5yMBtWXg?sub_confirmation=1
โ Support me on Patreon: https://www.patreon.com/LostinthePond
โ Follow me on Twitter: https://twitter.com/LostInThePondUS
โ Follow me on Instagram: https://w...
My initial tests got 1km with lora, with one antenna inside a Audi A8 (which is a Faraday cage) and the receiver being inside my house
had to tune the hz a bit on the sender but works flawless now ๐ I just need it for 500m
I suspect these cheap radios don't aim at exact frequencies, at least it doesn't result in equal frequencies with the small antennas
I programmed my Alexa to play let's it on when my wife opens the door when she gets home. Wish me luck
Kek
That brit is useful
Via con dios little music playing man
And you remind me that I need home audio and tts and voice prompts and .. ๐
@last cedar https://displate.com/displate/4948490
@glacial knot that is absolutely awesome
I cant decide! I am torn between two switches: 1: 48 port 2.5G POE with 2x 10G sfp OR 2: 24 Port 10G (autoneg), NON POE, 2x 25G sfp
buy both. problem solved
good solution! haha
@late gate i went with 48x1gb and 4x10gb, although that doesn't answer your question ๐คฃ
Somethings wrong. I can feel it. Just a feeling
@last cedar I went with the 48x 2,5 + the SFP and POE. The 10G was tempting, but then I have to buy everything in 10G. If I really want to run 10G on something I can rather run it on a sub-switch
yea looks like your HA somehow got off the english language. can really make things difficult i agree
Nah. That's alright. It isn't -18 outside tho
dude is so on point lol https://youtube.com/shorts/bQvwIIeUjsM?feature=share
Here's a one-minute primer on why Americans spell colour (British English) without a 'u'.
Subscribe to my channel: https://www.youtube.com/channel/UCqabPJa-N6ORAlO5yMBtWXg?sub_confirmation=1
โ Support me on Patreon: https://www.patreon.com/LostinthePond
โ Follow me on Twitter: https://twitter.com/LostInThePondUS
โ Follow me on Instagram: https...
Can't argue with the original Latin
some of the differences are so small and weird. "different to" just sounds wrong compared to "different from"
depends on sentence
cherrypicked:
What is the difference between โdifferent fromโ and โdifferent toโ in British English? American English uses only โdifferent from.โ
โDifferent fromโ is traditionally the preferred form. However, โdifferent toโ (used most commonly in the UK) โdifferent fromโ (used everywhere) and even the atrocious sounding โdifferent thanโ (used most frequently in American English) all mean the same thing and - hereโs the shocker - all three forms are accepted as correct by the Oxford Living Dictionary.
what good are dictionaries if they don't settle arguments? Pick a side, man
one of the perks of being an american.. I don't think we are so picky about it as long as it makes sense in the surrounding sentence
we certainly go outside the box with our grammar and usage
English is littered with intruder-alerts ๐
Ha, caught you - not a native speaker!
even before the interwebs every part of this country spoke a little differently
pop vs soda, bag vs sack etc
ever hear a NY'er say water?
I swear to god it sounds like they are saying wata
"buggy" vs. "cart" shiver...
all these differences kind of shattered any standard as long as it makes human understandable sense
I can't speak about the educational system now but I was never docked for spelling it colour on any homework or exams
For any Swedish ZigBee lovers
Ikea are getting rid of the symfonisk rotary encoders
Was โฌ1.5 each at IKEA Karlstad
I got 5
throw one in with the better zigbee adapter you wanted me to get ๐

Hopefully they will bring a new rotary remote
Thats bad
Really bad
The rotary one looks really nice and works great, the now one looks like a toy
today's test shows 9 pakets out of 8.000 missed over 500m, thats ok for me
the hue rotary switch is really nice, albeit $$$
The Terncy dial is nice, but doesn't like pairing to most CC2652 coordinators
All of them 
My current favorite is my latest, which makes the roomba smarter and ensures that it's running daily, when I'm not home
The ones that were the most surprisingly useful for me were the bed sensor based automations. There are probably some that I'm more "proud" because of the complexity
bed sensor ?.?
Pressure sensors
I considered that. One under every leg, and then use that as make shift personal scale ๐
what sensors do you use?
I currently just use the contact sensor for my bedroom door. Which works reliable enough as measure of me (trying to) sleep
those would be under the mattress, not between the bed itself and the floor, right?
I'm using load cells like these. I use just one under the mattress with the weight spread around with a piece of wood on top of it
You can probably do some fancy stuff like weighing your SO with a more complicated system ๐
no box spring under mattress?
the added wood is what has me confused
wouldn't placing it under the support for the bed that touches the floor work?
It would but these are 50kg max so I would overwhelm them
also my vacuum would eat them
ah
that be some vacuum to be able to suck it out from under the weight of the bed lol
I'm afraid it would rip the wires off
part of the reason I never looked into actually putting load cells under the bed
the roomba would mess with it
It works fine under the mattress but you need to spread the load out so it doesn't turn on the lights in the middle of the night when you switch sides. That was pain ๐
I'll probably just keep it on the door for now
That probably works fine too
wonder if one of those flat thermal sensors would work better
what I really need is a slightly better metric of whether I'm getting up. Proably motion sensor in my living room
So it doesn't start up everything if I just get up to take a piss at 3am
although I guess it would take time for body heat to heat up the mattress lol
If your schedule is fairly regular you can just use the time of day as a condition
nah, my schedule is pretty fucked
I have time of day as condition when it thinks I'm going to sleep. I think anything from 8pm to 6am ๐ค
But I sometimes do get up at 3 or 4 am, and sometimes just go to the toilet and back
it's not too bad though. Just turns on some lights and music
And there's another automation that makes sure that the music isn't too loud between 10pm and 6am
Maybe I should have it in relation to how long I slept ๐ค I rarely sleep less than 5 hours.
I should try to collect some stats over a month
I have a input_boolean that switches on "bed occupied" if I go to sleep anywhere between 22-05 or something like that. Then automations that use that boolean as a condition to turn on "night lights" during night if I'm already in bed. If I get off the bed after 6AM it turns on the lights to some other scene
It does fail sometimes and if it's cold outside and I have the window open, the resistance of the cells changes enough so that it thinks the bed is occupied. WIP ๐
I actually already ahve that data
I incresed default retention in the recorder to 30d D:
I should try that just for fun
anyways, looking at that it's regular-ish, but not regular
Think about the boolean switch approach. If you only go to bed once a day it should help
the going to bed works^^ it's whether I'm actually getting up that's iffy
Right, that does complicate things
Maybe with some sort of minimum sleep time you can make it work
I'll probably try that. Minimum of 5h sleep
though with a variant that if I go to bed after 1am and get up within 45min, I'm probably actually getting up
because then I probably ain't sleeping well that night either way...
I still haven't gotten myself a mmwave sensor. Those might prove useful in something like this
I have one, haven't had time to play with it
I actually sleep more after getting kids
They have like distance modifiers etc afaik
Before kids I slept 5-6h per night, now I sleep 7-8
one that actually gives an idea in a 2D plane would be interesting
because I could put that up on the ceiling in the main connector and use the information to figure out if I'm just going to the bathroom, or somewhere else
It's supposed to be the other way around ๐ค
don't ask his wife
She sleeps 9h+ every night
I have a similar amount of their old trรฅdfri remotes, wish they didn't use cr2032 batteries though ๐คฃ
I should look at rechargable versions of 2032s
I can count the number of batteries I've replaced on aqara and tradfri the last 5 years on one hand
Philips hue on the other hand, yuck
I must be up around 15 batteries in 5 years?
You had chernobyl hands right @clear ferry?
He apparently wasn't that much of an arsehole irl
But the show had to have its vilains
One of those rare shows that I've yet to meet someone that didn't like it
I'm usually the one that doesn't like anything
Probably my dad joke competition setup. Every Tuesday it texts the joke to the family with instructions to send the answer to me in a text. Friday the answer and scoreboard is posted. Took me a bit of template magic to parse the question from the answer and verify the joke is actually is question/answer format.
lol after that dude asked about gaming laptops with cd drives https://youtu.be/hY_FQss_g8E
I bought an old monster Alienware Laptop with DUAL GPUs.
Get some AWESOME Dawid T-shirts, Mouse pads and more here: https://dawiddoesmerch.com
Play some Minecraft on the Dawid Does Minecraft server courtesy of our friends at Linode!
Dawid Does Minecraft Name: Mctenthiddy, server IP: mc.tenthiddy.com
It works on Java version 1.19.3
Support th...
The whole idea is the ultimate dad joke, I am impressed
Ok throwing out the docker swarm project. It doesnt support usb or gpu passthrough. How stupid
getting a bit tired of the compatility issues
Swarm is quite overkill for 99% of deployments anyway
Just do two machines with compose and a shared IP, replicate storage between them or have shared storage and do up or down as needed
good ride
hmm shared ip?
Yes
Either manual or automatic activation
Or you can use haproxy to just set one hostname to point to two addresses
And use health checks
Ok, now I am impressed, you know socket wrenches
Yes
quick shoot it! it's trying to steal someone's catalytic converter!
I am long gone now ๐ฆ
Its on eBay now!
would have been more creepy had they synced the mouth to the words
my mailbox now has rgb
Eleanor RGB
What? Why? And pics or it didnโt happen.
Shhh
ooops
for the lazy mail(wo)men, who just put a piece of paper in my box instead of giving me the parcel when I'm in home office.
It's just my name tag you can press and it glows in green when I'm home, red when I'm not and blue on error
- a notification on my phone
Nice. Ok. I automated my mailbox. If mail is delivered and someone is home, google announces the delivery. If mail is delivered and no one is home, or mail is in the box without being picked up for an hour, a zwave light in the foyer changes colors.
So, I guess my mailbox is rgb also ๐
how do you detect a letter?
Door sensor. With some timing and templates on when it is opened
I was thinking about adding a light sensor but this thing runs on battery so ๐ฉ
oh nice, that would be cool but neither zwave nor zigbee reach to my mailbox
thus i needed to make it with lora
Had to creep on the mailman for a couple of weeks to figure out a timespan on when he showed up
๐คฃ
haha nice
I only see battery percentage, will think about adding a close/open sensor
its cool, I just wish esphome would know lora
Somewhere I read that the distance was unlimited which is what I am looking for
You have to have an available mesh though I think and possible pay for it ?
seems unrealistic to me, the cheap dev boards can only do a fraction of real lora gear but it's still kilometers
Do you have a gateway?
You can do your toilet seat too
doesn't have lora, lame
Who is Laura?
Honeywell: enroll in demand based response, PLEEEAAASSSEEE weโre begging you
Ugh fuck off
unless your area is prone to blackouts you won't even notice it
Not with my mother. Sheโs constantly playing with it by a degree or two. Shes convinced it makes all the difference. โOoh Iโm feeling cold, Iโll set it to 69โ (70 if sheโs really cold), or Iโm hot, Iโll set it to 68.
Iโm not a post-menopausal woman, and I have no idea what thatโs like, so I figure better to just let her play with the meter as she wishes and not speculate further if itโs psychosomatic or not.
I once worked in an office where there were constant arguments about the temperature. I solved the battle between the "too hot" and "too cold" by adjusting the dial so that it showed 2C warmer than it was.
The people who liked it cooler were happy because it was cooler, the people who wanted it warmer were happy because the thermostat showed 24C
Hi guys
I head that if you use a tag with a.0 you need to rebuild your database is that right....
I did use "# image: homeassistant/home-assistant:2022.10"
some time ago if that right
how do i do this
please @ me if you're able to help I'm using MySQL
Oh what a lovely release 2022.10 was
This isn't the channel for getting help in ๐
sorry
where should i ask this type of question i though off topic would of been fine..
There's no support for Home Assistant here - please look at the other channels for that. If you can't work out which is relevant, start in #general-archived.
If it's a question about the HA Yellow see #yellow-archived, and #330990055533576204 for the Blue. Install related problems go to your Installation Method channel.
No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
If you found this server and want to know what it's about, start with the web site: https://www.home-assistant.io/
Remember when reporting spam to include a screenshot of the spam and the user's handle (eg @spammer#123)
โ๏ธ tells you that if you don't know start in #general-archived
sorry
Is it a easier method of NFS rights (client to nfs shares) than replicating the uid and gid on both devices?
This house is my fav
Nice, moved my HA adapter and everything seems still paired so far.
those eggs were poisoned
...
Still worth it though
They were coyote eggs
coyote eggs? lul
which came first, the atx or the egg
@last cedarplay with your cat already https://youtube.com/shorts/C-mHZ3brRh0?feature=share
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
Source Material:
https://www.instagram.com/motikiro2/
We do all our ...
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
We do all our own edits, voices, sound effects, and subtitles. Send u...
@forest edge
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
Source Material:
https://www.instagram.com/p/CleTk4gAjeJ/
We do all ...
That channel has so many raccoon videos
I know what I am doing today, other than stealing doormats
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
Source Material:
https://www.tiktok.com/@alldaynyc/video/718999914390...
Sorry for the spam, but these are top notch
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
Source Material:
https://www.instagram.com/p/CmXtbW_pR14/
We do all ...
I promise that is the last one
for this hour
Is that your wedding photos with michelle?
Looks more like he has adopted him
Don't tell @clear ferry s other wife
Yaaaas
Submit your video: https://linktr.ee/klr.productions
Personal Voiceover: https://klr-productions.com/personalized-voiceover/
Shop: https://my-store-c1fcbe.creator-spring.com/
Instagram: https://www.instagram.com/klr_productions/
TikTok: https://www.tiktok.com/@klrdubs?lang=en
Source Material:
police dog - https://www.instagram.com/hubakennel/
d...
There may or may not be 2 raccoons in that video
Exactly
It will be our little secret
Running some conduit today....
4x32mm pipes for network cables to the upper floor, is that enough points?
2x20mm from the fuse box as spares
2x32mm for solar panels
1x32mm to the loft for network cable
cant you just run one fibre?
1x20mm for the alarm system
1x16 for the ventillation system keypad
1x16 for the thermostat
Where is the fun in that?
I really only want 1 switch, so I use 8 way poe injectors for poe stuff and a single 48 port switch. Ideally I would just grab another switch and run fiber though, but cable is cheap and I can terminate it myself
Why are candy bags the loudest noise known to man after the PornHub intro tune
at least a basic, but functional ILO working now
need moar foam
It is fire seal ๐
Utterly pointless with it being through wood, but at least it doesn't drop sawdust through
7x32mm, 3x20mm, 2x16mm
needs more plastic
i dont know why you are pulling two lines for the solar panels
also why is there Network Adress Translation written 3 times on the wall/ceiling/floor whatever this is
Can reuse it for whatever, once it is run ๐คฃ
"Nรคt" network
Nรคtwork
Nรคtvรถrk
srsly?
Nej
@glacial knot nรคtverk
TIL that the verk part has nothing to do with the Finnish word for network "verkko" which instead comes from Germanic word Werko meaning a net
Warum, the finnish-hungarian language loans words from the Germanic language tree?
trade ties with them for a long time seems to be the reason. We also call Germany Saksa after Saxons unlike most of Europe
pls no
Hey look at that, the word Rakas (person you love) comes from a Germanic word Frakaz, meaning greedy or lustful
wtf are super reactions? anyone with nitro have access to that crap?
Animated reactions that extend over the box they are in when you hover over them. It's cancer
chip bags too
The two things I don't want my kids to know I'm rummaging in
i was one of to many so
and yeah people did get "forked" stabbed by fork over taking food off others plates
super reactions are discords next step to cash grab you
btw i super reacted on your message, so you can take a look at it

I apparently had 5 left, but clicking on yours to add one apparently consumed one of mine...
I'll take off topic to heart here, on the assumptions that home automation does in fact attract nerds. There's a rather interesting Kickstarter going on for a solo RPG where you act as a spirit guiding a party of hapless heroes, blissfully ignorant of your presence; https://www.kickstarter.com/projects/nnesk/caregiver-0/description
It's kind of interesting from a mechanical and narrative perspective, much unlike most things I've seen in the genre. YMMV, of course.
does it allow custom ones? cause I got some ideas lol
what do i know
ยฏ_(ใ)_/ยฏ
i aint paying for discord
I don't see a separation of normal reactions from super ones
i had 2 free ones
the only benefit is, that its highlighted and animated
yea i don't even see 2 of them. i had saw the pop up about them being added but guess i'm not special enough lol
I have "Nitro Classic" that they don't offer anymore, and I got 5
it's confusing because, as you say, I don't see any distinction in the list
waiting for them to put a limiter on the amount of posts you can make in a day without having nitro
I'm bored - who wants to hang out in voice with me? ๐คฃ Just finished meeting @red rock - he's a cool guy!
the answer is no racoon
Super reaction should actually send an IRL raccoon to users homes, change my mind
Shhh
lol apparently china is averaging 7 ev fires every single day.. that's just the cars too, not including the scooters etc
How is esxi on passthrough of things like gpu vs proxmox? Wanted to try esxi instead of proxmox since I have a license so why not if itโs better
Odd, I can't @ groups anymore here.
I guess you donโt protest switching to esxi? @clear ferry
If you want a dedicated hypervisor it is the best choice
I will try at least on the homelab
For anyone that uses Snapchat, they just added MyAI which probably uses some ChatGPT derivative, and it by default can see your story, have to manually disable that
Never going to charge one indoors at my house, I have made a plan where they can stand and charge as far away as possible from any buildings
I realise ice cars catch fire, but at least they don't burn uncontrollably, and for no reason
@forest edge
Almost
What does MyAI even do?
Also where do you turn it off
Settings for your relationship with it
aint like snapchat cant see what you post
i'm surprised you even use it
Sure, don't want an all consuming ai to chew it anyway
I'm a critical user, but I still use it
Just for unsolicited disk pics to @last cedar mostly
yikes
I love taking pictures of my disks
Especially the bigger ones
Eh, I prefer the detail off the skinny, longer ones
Oh, so 2280 nvme then
Hot shingles || magnetic recording || in my area
"these hot drives want to meet you at Strรคngnes"
Is it any bootable isos of esxi?
it's actually supposed to run on SD cards D:
How old is that?
38 minutes old
almost racoon nugget
๐คฃ
I tried to use etcher, and getting no partition scheme, and wont boot. maybe its something to it. Also do vmware perform as well as say unraid on passing a GPU? I was thinking of using it on a machine with way newer Intel GPU, and pass that to a plex vm, and use one VM for the machine itself (Nvidia graphic card, monitor, keyboard and mouse), or do just unraid support running a vm on itself?
Why not just write the iso to a usb with Rufus?
Or mount it via oobm
No idea if etcher supports Isos, I've only used it with img
Host OS needs a GPU, but yes you can pass one through to a vm
That said, never needed a GPU in Plex
I dont have windows, so no rufus
I need gpu in plex as many of the people using it is on slower lines abroad
a lot of tanscoding
Ah, the AleksFlix service
aren't they capped at 3 streams at a time?
no, that are not capped
but its a bit my fault as so much is in 4K
I should setup two instances of sonarr and radarr so it download in HD and 4K
aside from the like quadro gpu's I am pretty sure all nvidia cards cap the amount of streams at one time
newer cards like the 3k series may be more than 3 but everything below that is 3 and less
you might be doing more cpu transcoding then you think lol
yeah that might, and its on the nas now (synology), on the machine I was thinking its a I9 10k cpu, and will get the intel gpu for the initial transcoding. the nvidia I want to use as a regular computer with light gaming (like I did with unraid)
so when the cpu is used on the nas its extremely slow
Then unetbootin
I will try. I can do it over the remote desktop thing, but it was deadly slow to start the image
You mean vpro?
Yuck
yeah it feels like I am on a 32kb modem. its alright to do a bios change, but install an iso, maybe not
TFW home assistant discovers your neighbors are using govee bluetooth lights
I stole my neighbours ZigBee light a few years back
lul
And it's 28m from my house
yeah i have no idea how it's reaching but it is
this BT dongle must have some reach
it does have a big ass external antenna like the sonoff zigbee stick
meanwhile i can't get this motion sensor to repair even though it's sitting right under the bulb im trying to pair it to
OH MY
It appears a neighbor is going all in on the bluetooth stack
lmao
well that's kinda scary
one click and it imported into HA
It's a temp sensor
how to show forecast for next days, not hours.
I looked in several threads and did not find the information.
My Weather card only shows days afaik
Anyone ever tried the wifi blocking paint
Which in would help with zigbee/BT as well tbh
Found out, it depends on the API provider, I was using "openweathermap", switched to "AccuWeather", wanted to test "PirateWeather" but the site doesn't seem to be working.
If anyone has, and it works, they won't be able to post about it
next house im definitely going to faraday cage the whole ass exterior
and just get cell repeaters for the signals i do want
2.4ghz pollution is nutty even in the burbs
before/after it rains i pick up wifi networks blocks away
For prioritising your own signals, or health?
my own signals lmao
granted my neighbors probably HATE me
at least if they were knowledgeable they would
i have so much shit on 2.4ghz it's not funny
I am fairly lucky, I only see 2 ssids on my phone, and they are both mine ๐คฃ
Ooofsters
although i trimmed it down to 3 aps
I actually wonder why I can't see the 5ghz ssids.... did I turn those off? Lol can't remember
6ghz has been a life saver too
and i use 60ghz aps to pipe internet into the garage. Not cabling that shit
damn near full gigabit too. It's nice
My idea is to have a guest one, iot and local network
That is nice! I am out of touch with 6 and 60Ghz...
i have guest which i turn on/off, IOT with internet, Smart wifi stuff without internet, my main, and 6ghz
the iot with internet is split 2.4ghz/5ghz
so 5 SSIDs
6 if guest is on
Googling a little leads to be ask... wifi 6e?
yes
soon to be wifi 7
60ghz is for ptp stuff
60 GHz PtP radio system with 5 GHz backup.
The airFiber 60 equipped with a high-gain dish antenna and 5GHz backup radio establishes sustainable PtP links and deliver a 1.9 Gbps throughput rate. It also has a dedicated Bluetooth management radio so it can be set up quickly and fully configured with the UISPยฎ application (web/mobile). It can als...
https://mikrotik.com/product/wireless_wire mikrotik sells these kits too which work good
more affordable
I have a wifi 5 ap at the moment, a couple would do all I need to atm!
i use powerline adapters too for some of my cameras lol
it only puts out like 10-50 mbps but that's more than enough
Yeah, lots of stuff doesn't need a lot of bandwidth
i have 3 zigbee networks and 2 z wave networks
so yeah channel management can be annoying
luckily none of the high performance stuff relies on 2.4
Oh heck, now I understand the need for a fariday cage ๐คฃ
indeed
it's only because of how limited zigbee controllers are
if i shove it on one it doesn't do what I want fast enough
with lighting effects
strobes etc
but with it split up and 3 different controllers issuing commands, its much better
I wonder how hard it would be to build a high performance zigbee controller with MIMO
anyone else hate the fact that they're trying to push IP/TCP connectivity through thread
when the explicit reason i went down the home assistant road in the first place is so my entire automation setup is not internet connected lol
I mean, for a company like philips or whatever, there are lots of benefits in being able to say "we have a complete solution", so I get why they do it
But there shouldn't really be a need for a specific bridge or gateway, z2m is, and zigbee as a whole quite amazing in how flexible and open it is, sure it kinda sucks that it isn't a different frequency to 2.4 wifi thiugh
My (zigbee) network isn't meshing so well, everything seems to favor going straight to the coordinator, not that this is a bad thing really, but we have lag on the upper floor (sometimes a couple to 10 seconds) on zigbee commands going to lamps, which is annoyong, but not really thr topic for this channel
sounds like typical racoon jerry rigging to me..
Did someone use https://homey.app/en-us/homey-pro/#pre-order vs https://hoobs.com/pro/#toggle-id-3 vs https://hubitat.com/products and can compare?
Since this is a Home Assistant server, you're unlikely to get much help with those
that hoobs thing looks like someone just forked HA and redesigned the front end a little
I totally understand the appeal for such devices even at their outrageous price tags cause so many people just don't want to deal with coding or super complex means of making something work as they believe it should
The ui looks like it was made for MSDOS
It's so butt ugly. Lol
wut? I think you are looking at the experiments graphic
i do like the node red kind of interface for creating automations
Not by design, i thought it would mesh itself if recwption was better to a repeter than coordinator, but unsure if 40+ devices should all be connecting directly to the coordinator even if the signal strength is ok
I don't think zigbee networks are that advanced. like wifi how it will hold onto a connection from a node even when that signal becomes shitty and there is another closer node available.
I love the 4th comment to that clip.. agree completely
@forest edge just looking, people in the house use 2.4Ghz headsets and mice, it is probably interference from that
you running a cyber cafe or something?
just how many headsets/mice could you possibly have going lol
unless your router is wearing a headset or something, I just don't think interference from such devices is that impacting.. but then I guess if you order from aliexpress like some i could see quality changing the tide
There are 3 mice and 3 headsets, I have a boat load of those ble temp/ humidity sensors with displays, I have made a fairly dirty 2.4Ghz band I think ๐คฃ
Unsure what channel the wifi is on, as well
easy way to find out.. turn that shit off and see what happens lol
Mmm, exactly, when I think about it, it is certain times of day when it happens, but not every day, so I need to pay more attention to what is on/ off at the time
Depends on your coordinator. Some have limits of how many devices they'll handle with direct connection
probably a microwave with a racoon in it
though so far I get the full K-graph with my router capable ones, and the a bunch of attached leafs with the broken implementation of battery powered aqara ones
A zzh!
you could also log (and graph) the LQI for the links you are worried about and check whether you find a correlation of it and your hang/lag
you may need to have some automation running that forces devices to send something to get LQI readouts updated though
zigbee routers here are pretty much limited to just smart plugs.. rather annoying
Lqi is just wet finger in the air at best
bing is much more fun to search linux iso's
Or suicide tips
ok bro
absolute value is probably trash, but trend should be correct
though it's often not updated when there's radio silence, which makes it untrustable without a steady stream of communication
Happy Easter @last cedar
Thank you so much. I love this time of year, so many eggs to eat
Stil I don't know better place to ask ๐
Reddit's r/homeautomation would be a better
@clear ferry have you ever seen the error message โrmrr overlaps system memory msiโ when booting esxi installer?
No
Hi, When trying to install ESXi 6.7u1 on SuperMicro SYS-5019A-FTN4 I get following error as soon as installer UI comes up (graphical progress bar appears with black/yellow background). Don't have same problem with ESXi 6.7. Any ideas?
ah I always forget about reddit.
generally that's a good thing
My home
๐ค you live on reddit?
That would explain things
atx is 3 people on /r/datahoarders
blursed
he looks way to thin on the 4th

