the-water-cooler

[keen bridge]

OctoPrint bed visualiser 😉

[forest edge]

i need to setup my bltouch

[night zodiac]

it made me want to increase my bltouch sample points, a few weeks ago

[forest edge]

but i didn't think those meshes meant it went over the entire bed 1mm at a time

[night zodiac]

but would have to recmpile stuffs, lol

[keen bridge]

You'll need to recompile the firmware for the printer to add more points, I think mine is 5x5. But it's worth it

[night zodiac]

apparently I installed bed visualizer but never added gcode, sec

[midnight adder]

i just installed the visualizer

but the printer is to cold😅

[night zodiac]

idk which gcode I need

I think unified

wait, bilnear

heating up

[midnight adder]

done

[night zodiac]

7x7?

[midnight adder]

had to turn on the Printer Enclosure heater first😂

[midnight adder]

prusa default ye

[night zodiac]

https://share.busheezy.dev/i/c9VzBH

mine is fucked. 🙂

thank goodness for bltouch, lol

I didn't realize it was so wonky

[midnight adder]

ye

or pinda

I don’t know how i could life without before

Can’t wait to get the Bambu lab x1C

[tidal bronze]

Lol is it wall mounted ?

[night zodiac]

lol, I think I changed springs about a year ago

eyeballed it

I can't find a piece of paper 😦

[midnight adder]

springs?

just bolt it down

[night zodiac]

I just got back from twisting things

pretty sure I bought solid mounts

and and forgot

(not installed)

https://share.busheezy.dev/i/GRqr4F I would say so

[tidal bronze]

What model do you have ?

[forest edge]

wtf is that. looks like your bed is in the middle of doing the wave

i should sell "go away cali's" badges

[night zodiac]

and all of my prints have worked, lol

Sonoma, make sure your bed is orientated the right way too. one way pulls down way harder.

you probably felt it though

like for some reason 90 degrees on way is a lot more ummph

[tidal bronze]

What's that?

[forest edge]

redesign of my doorbell wedge

like a fool i made one from thingiverse and it blew chunks so I redrafted it

[tidal bronze]

Is that a 3D printer?

[forest edge]

yea sorry. not all of us can buy the industrial shit

I told you, you were off the hook for that cloud print i asked you about eons ago

[tidal bronze]

Doorbell?

[forest edge]

yea my old ad110

i bought the ad410 for black friday but i don't like it

so putting my old one back up

[tidal bronze]

Oh ok. So adding some tilt

[forest edge]

yea. it was pointed too far up for me to catch cats and racoons passing by the front door

[tidal bronze]

Lol. I did one few years ago. Heat warped it so bad. No more wasting time with 3d print stuff

[forest edge]

using petg, not suppose to do that

[tidal bronze]

Let me know how that goes in 2 years.

[forest edge]

lol

well it sits behind the doorbell so it shouldn't be much of an issue

[tidal bronze]

Let me know

[forest edge]

feel bad who bought these and started sticking pla stuff outside

[tidal bronze]

Pretty sure 99.9%

[forest edge]

are you part of that 99.9%? lol

[tidal bronze]

Nopes was petg

[forest edge]

your shit sits in the garage, remake using abs

[tidal bronze]

Switched to aluminum, done.

[forest edge]

I can't use abs cause this printer is sitting next to me lol

[tidal bronze]

You will be just fine.

[forest edge]

yea cause even if it warps it's staying put. deliveries will just have to push the button upwards as the doorbell sags downward

[night zodiac]

I have a doorbell. Doordash insisted on knocking on my door over and over today while staring at my dog through the window. 🙂

[forest edge]

depending on the doorbell some people don't understand the center of the lit up ring is an actual button

[night zodiac]

he didn't look for a button. my button could probably be more apparent

https://www.amazon.com/gp/product/B07D19YXND/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 🙂

I installed my solid mounts. https://share.busheezy.dev/i/VGWaVz I have a consistency

[forest edge]

does the nozzle grind into the bed on larger prints? lol

[tidal bronze]

KC people are strange huh?

[forest edge]

just because people don't see drones delivering tylenol to people's doorstep dosen't make us the strange ones

[tidal bronze]

Damn 2 minutes to land. Home sweet home. Catch yall later

[forest edge]

later,, enjoy the smog lol

[night zodiac]

No, bltouch fixes everything, lol

The pizza place gave us the wrong pizza

Then we got a replacement

And it is covered in onion

[forest edge]

i need to set mine up. i spent a long time leveling this bed. curious how close i got

[night zodiac]

These mofos baked out of their mind

I hate people

[forest edge]

your pizza comes cut into squares?

[night zodiac]

yeah, it's a thing

[forest edge]

well there's your red flag right there lol

[night zodiac]

it's a chicago thing

tavern style

[forest edge]

really? i never heard of that

but then the only thing "chicago" style here is deep dish

[night zodiac]

yeah, my family's pizza place growing up always cut like that by default as well.

yeah, that's shit

https://www.bonappetit.com/story/real-chicago-pizza-tavern-style

[forest edge]

man you and tediore should hook up. he looks lonely

[static schooner]

pizza cut into squares is very much a Chicago thing that you'll notice immediately

[forest edge]

square pizza is shit

[static schooner]

well, it's round pizza cut into squares

[forest edge]

i've seen people cut those cheap pizzas you bake into squares. drives me nuts

[static schooner]

I lived there well before Google and the ability to easily research weird local customs and it was quite surprising

[forest edge]

i never heard of chicago pizza being in squares

[static schooner]

like, pizza comes with its own handle so that you aren't grabbing the toppings. who wants a piece from the middle?

[forest edge]

hell the chicago place here named that from people who were from there don't cut thier pizza into squares

[static schooner]

it's like eating pizza with a fork and knife

[forest edge]

well deep dish i use a fork lol

[static schooner]

it was weird, and they are wrong

deep dish pizza is an entirely different beast

[forest edge]

our pizza is more like NY pizza cept you don't need a whole roll of towels to soak up the grease

[night zodiac]

I don't even notice it. If you order a pizza at any tavern around here it will arrive cut in squares, lol

[static schooner]

I do not miss that

[forest edge]

knock on wood.. so glad my prints aren't coming out all stringy like i see in other people's print pictures

[night zodiac]

they probably have their print speeds cranked up

[forest edge]

i dunno, before i went down this path literally everything i read online talks about petg and stringy

[night zodiac]

I forgot you're on PETG

[scenic radish]

Wilma has some good videos on PETG vs PLA

[forest edge]

outside temp was reading -132F was like wtf

then realized the batteries died on the sensor heh

[night zodiac]

https://tenor.com/4kTY.gif

[forest edge]

i wish you could like print two halves of a print then somehow make the printer melt them together

that way on slopes you don't get that stair step effect

[night zodiac]

maybe I'll take apart my ender 3 clone and install the siltentboard I bought

and the bltouch I bought

like a year ago

[forest edge]

what silent board?

[night zodiac]

https://www.amazon.com/gp/product/B082W8JW1M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[finite atlas]

why do you text here then ?

[forest edge]

board shows as unavilable.. already out of date?

[night zodiac]

https://sovol3d.com/products/tmc2208-silent-mainboard?variant=32124220538968

[night zodiac]

https://share.busheezy.dev/i/ahQ9qJ okay good enough

[forest edge]

yea it will pool in the center and not run off the front

[night zodiac]

big if true

[night zodiac]

I can't figure out when I bought one of my printers

they deleted the website I logged in with at the time

[dusky plank]

https://tenor.com/view/lotr-so-you-have-chosen-death-chosen-death-lord-of-the-rings-gif-15767548

Alright who tagged me?

[forest edge]

ur mom

[glacial knot]

not me

[scenic radish]

not me

[dusky plank]

[static schooner]

@dusky plank

Oops

Fingers slipped in an oddly specific pattern

[dusky plank]

https://tenor.com/view/kick-anime-mad-angry-gif-16580938

[last cedar]

Friction welding

Or superglue

[forest edge]

https://tenor.com/view/filthyfranktv-friction-fire-rub-hands-gif-9189388

[last cedar]

Exactly, if only you had spared the raccoon, it could have helped you

https://tenor.com/view/raccoon-gossip-pet-lover-excited-gif-20654709

[forest edge]

you would really not like living here. saw some of your friends on the side of the road a bit ago when i went to my mothers

you would probably be one of those people that would cause traffic accidents freaking out and slaming on your brakes while yanking the wheel over

[static schooner]

To run them over again?

[last cedar]

Just because you like killing raccoons twice doesn't mean I do

https://tenor.com/view/kitty-forman-debra-jo-rupp-laugh-meme-hysterical-laughter-lol-gif-24893555

[forest edge]

no to weep lol

[last cedar]

Nah, I am good, I get sad but I don't just cause a danger for everyone

But if it was alive I would slam om my brakes and catch it

But like 100% serious now

I would love to go watch wild ones, they are awful pets

Same with most animals tbh

[glacial knot]

nah, Lions would make for great pets

[dusky plank]

y u no use garage door

[clear ferry]

because I'm not a car

[dusky plank]

relatable

[last cedar]

Easee charger? They are so smol

[clear ferry]

Yaaaas

works great

[last cedar]

Lots of people are really happy with them

And they are pretty cheap too tbh

[umbral cliff]

Surprised your charger hasn't frozen to the car

[forest edge]

how do you know it hasn't? i see no sign of it being touched.. maybe it's stuck lol

[clear ferry]

-19c earlier this week, frozen doesn't really happen unless it fluxes up and down around zero

[orchid rose]

yeah snow can't freeze

[orchid rose]

lul

[shadow prawn]

That smell, that smelly smell

[clear ferry]

JA

#kitchentableprobing

[orchid rose]

why is it shining like it's uranium?

[clear ferry]

Because I made a deal with the Iranians

https://tenor.com/view/darth-vader-alter-the-deal-empire-strikes-back-star-wars-gif-15971205

[orchid rose]

also the cabling with the uncut zip-ties looks like it was made by me

[clear ferry]

I take pride in being a well trained hobbyist without OCD

[orchid rose]

I can see where you got the idea for the candle from

[glacial knot]

oh, candle

[clear ferry]

Oh interesting, my Bowden is too short, so it can't move to the end of the bed

[orchid rose]

Do you find the auto-bed-levelling worth it?

[clear ferry]

I did when I had it before, I removed it because my ducts and stuff broke

But i want to go back to it

[orchid rose]

It's not that expensive but looked annoying to wire with my system so I thought I might as well go without it

[clear ferry]

Mine is the 3d touch

The ripoff at 1/5 of the price

Have had no issues with the probing

Just with myself

[orchid rose]

3d touch is the one I was looking at as well. Apparently not as accurate but probably more than enough

6€ including postage from Ali

[clear ferry]

Yeah currently I have the e3d v6 hotend

With hero me 5 dual 5015 fans

[orchid rose]

That looks fancy

What are the differences between the hotends? I haven't looked into that at all yet

[clever mortar]

Done

[dusky plank]

thanks

[calm wind]

Huh, I just saw a notification on this channel. No clue why

[clever mortar]

Spam

[night zodiac]

atx pinged everyone to show off their wiring

[static schooner]

Apparently sexy spam

[calm wind]

aaah

[clever mortar]

Looks like there's a run of them

[dusky plank]

tf, why am I red

[clever mortar]

Because it didn't post

Red says that it failed to send

[dusky plank]

weird

[low harness]

Yeah... get used to that, new mods.

[keen bridge]

It should have a ! in a circle on the right

If Discord blocked it automatically Clyde should message you about the auto recognised porn

[clever mortar]

I doubt it was blocked, more likely the usual problem with Discord stability

[dusky plank]

it seemed like it timed out yes

no blocking, but yeah I agree lets bash on the Mods

[night zodiac]

that was too flashy

[low harness]

...yes

[night zodiac]

I posted a gif that was very seizure-e

whoops

[dusky plank]

it has a retry and trash action

[clever mortar]

Yeah, that's a timeout

[low harness]

Going back to the previous discussion. I made my own bed leveling sensor for my first printer. Just a push button I tore out of an old dvd player and a printed adapter that would press fit onto the nozzle.
That was a delta printer, so having that with the marlin auto tune thing took the leveling time down from hours and hours to about two minutes.

[night zodiac]

neat

I have one more print I need and then I'm going to break my main printer and install klipper

[late gate]

I accidentally made an automation sending to all media players making announcements. That kinda included the speaker of the front door doorbell on max volume. I bet the neigbours wondered all the bad words was spit out when I was playing with TTS

[midnight adder]

Lol did that by accident too but with the Outdoor Speakers around the pool

thats 6x 8“ speakers 😅

[clever mortar]

I may have wondered why turning up the volume on music wasn't working, not realising I was controlling the music at home. The wife was not amused at the Sonos playing music at maximum volume...

[midnight adder]

😅

[clear ferry]

ngl, installing esphome via the browser is pretty cool

shame it doesn't work in firefox

[night zodiac]

yeah, I have to pull up chrome for it. 😐

[clear ferry]

I pulled up edge

because fuck chrome

[night zodiac]

lol, I have chrome installed still from my transition

[midnight adder]

which is basically chrome😂

[clear ferry]

these days yes

[midnight adder]

i just have the opensource chromium installed

[night zodiac]

oh, I didn't realized there was a thing called OctoKlipperPi

neat

[clear ferry]

I'm just so pissed at chrome in itself after it shitting all over me for years

[midnight adder]

but i mainly safari

just way more power efficient for sone reason

[rapid tendon]

Ugh i've never wanted software to break down so badly

my adguard addon has a bad habit of going non-responsive sometimes, and I finally tracked down logs that show up when that happens, made a sensor and automations to autorestart.

Works if I manually inject errors that get picked up but...

I want the actual thing to happen, to make sure what i built actually works

[late gate]

I was told off adguard as it reduced WAF 😦

[clear ferry]

my wife loves unbound blocklists

no more ads at home

and she connects to wireguard when commuting to get it there too

[night zodiac]

I have that automated on my gf's phone with tasker. pretty neat

wireguard + pihole

[late gate]

it blocks some kinds of streaming service so I got yelled at

every argument boils down to the never ending smart home lol

[umbral cliff]

I did that until I went overseas, now I'm overseas the extra ping is too annoying

[clear ferry]

so adguard is shit like I assumed then @late gate

[late gate]

yeah it blocks weird things

[clear ferry]

we never have arguments in this house, wife just tells me what she wants to automate

[late gate]

I was TOLD to put up smart dimmers a place today. I almost went to the hospital of shock

[keen bridge]

Hahaha

[night zodiac]

I was going to install klipper with octoprint but now I am installing something other than octoprint

https://tenor.com/wq3B.gif

[clear ferry]

Fluidd?

Also, why is Alice doing a colonoscopy

[night zodiac]

yeah, trying Fluidd

a bit lost as the docs lead me into the dark

but will get there soon. 🙂

currently trying to figure out the pins for my bltouch without taking things apart

[clear ferry]

Fluidd looked nice, could never get my z probe to work with klipper, so scratched it

What board do you have?

[night zodiac]

yes

[clear ferry]

Ah, the classic yes board

What printer?

[night zodiac]

I have a Ender 5 Pro with what I believe is their silent 4.2.2 board

I think

[clear ferry]

So

Using the 5 pin bltouch connector?

[night zodiac]

it's what they sold officially a few years ago

listing changed

[clear ferry]

Then it should be Sensor ^PB1 and motor PB0

[late gate]

Ender 🤢 bltouch 🤮 N00bs

[clear ferry]

Yikes that is old firmware

[night zodiac]

yeah, I know, lol

I think they have 1.1.9 now

[clear ferry]

I compile my own based on 2.1.1

[night zodiac]

there was a period where they only had their firmware on their facebook and I didn't have facebook

oh, I am blind

they had bltouch in the config. 🙂

oh, nvm. I was looking at wrong config. 🙂

ender 3 pro uses same bltouch config it seems

[umbral cliff]

Works fine for me. Its based on what DNS and block lists used. PiHole could do jack shit for me

[night zodiac]

this says leave communication for usb disabled but not sure what to choose instead o.O

🙂

atx, did you choose usb or serial?

if you even used this

[clear ferry]

Serial

In the klipper bin file creation

[night zodiac]

I got it connected, thanks!

I need to fix a few more things though

it seems like z probe offsets are entered in positive values rather than negative like marlin

dinner time

[green inlet]

This used to be my life. Took some time until I got everything working. Now, I could threaten to shut it down (I don’t ) and everyone in my family would miss something. They all ended up finding a piece they need/appreciate 😉

[night zodiac]

atx, you probably used the docker setup for this, yeah?

[night zodiac]

okay, got things connected. they had some magical script to fix stuff broken from updates that I had to find

[night zodiac]

okay, it's printing very nicely but I forgot to change my gcode 🙂

start/stop stuffs

hrmm

I wonder if it can be automagic like octoprint with turning on/off

I found it!

[last cedar]

Octoprint has the advantage of 8 tenticles though

[keen bridge]

Oo, are tenticles are better than tentacles?

[twin forge]

So I wrote a POC to protect endpoints in nginx via HA's auth tokens. The only thing I wasn't crazy about was needing to store the token as a cookie. Wondering if anyone has thoughts of an alternative method?

[last cedar]

Yes

[keen bridge]

I approve

[keen bridge]

Use something that is designed for this instead of abusing HA

[twin forge]

What do you mean?

[last cedar]

Damn tenticles

[last cedar]

Think they mean that just because HA can do this, doesn't mean you should use HA to do it

[keen bridge]

HA is not designed for this, don't do that

[twin forge]

Designed for what?

[keen bridge]

You wouldn't use a hammer to install a screw

[twin forge]

It's not designed to handle authentication?

[keen bridge]

Not for random other services, no

[twin forge]

I wanted only HA admins to have access to nodered, esphome, etc...

[keen bridge]

It's designed to handle its own auth and that's it

[twin forge]

It is handling it's own auth.

[keen bridge]

NodeRed should handle NodeRed, etc.

[twin forge]

So you're suggesting implementing a separate oauth environment for a few apps that are considered a suite?

[keen bridge]

Or use their built in authentication methods

[twin forge]

Basic auth in some cases... That seems worse.

[keen bridge]

But using something not designed to do authentication for other services for that purposes is never the right thing to do

[twin forge]

Not sure I agree in this scenario entirely.

How does supervised protect addons?

Genuinely curious. I dug through the source s little but theres a lot going on in it

[keen bridge]

It doesn't

Addons should protect themselves

[twin forge]

Oh wow so addons are wide open by default?

[keen bridge]

It depends on the addon and its configuration, but it would be open to your local network by default in many cases.

[twin forge]

Like i know file editor supports basic auth but when i used it in supervised there was no auth prompts or config that i recall

Well either way. Even if not the most optimally built out way what I did was write a custom panel that sets the token in a cookie then acts as an iframe to the endpoint on the same domain. Nginx intercepts and requires auth redirecting to a custom python daemon that checks the token via websocket. Requires is_admin then grants accessm nginx caches the auth token for X minutes to reduce auth checks to HA. I'm able to protect my "addons" and not rely on basic auth or passing the password in a url.

[night zodiac]

https://tenor.com/wdsX.gif

[young sigil]

Please discuss your Rube Goldberg machine in #add-ons-archived or other appropriate support channels. This channel is for raccoons, and tentacles.

[glacial knot]

tenticles pls

[forest edge]

what kind of japanese porn are you into? lol

[young sigil]

https://cdn.discordapp.com/attachments/397426163649216512/1053843490099953725/unknown-3.png

[night zodiac]

discussion of octoprint lead to "tenticles"

I've been messing with printer all night

https://share.busheezy.dev/i/yppNLf boat maker

it managed to print perfectly without running the mesh code, lol

because of how much I messed with it last night

something made it print flipped 180 though, have to look into that

[forest edge]

why is your magnetic pad on sideways?

[night zodiac]

it sticks better

[midnight adder]

@mint estuary which changes?

AFAIK, only main changes are distance and guestimated locations

[mint estuary]

huh?

@midnight adder I'm confused haha

[midnight adder]

i love the advances of bluetooth lately so much fun! haha

you wrote this

like 20 seconds ago

Or am i really this dumb 😐

[scenic radish]

That was in a different channel

[midnight adder]

Well yeah, I don't want to spam a support channel and make it so no one helps him 😦

I might be stupid, but I've learned not to do that 🙂

[mint estuary]

ooooo haha

yeah Ive just been enjoying the month or so of native bluetooth suport

being able to discover my airthings and switchbot stuff automatically is very nice @midnight adder but I'm hoping someday i can hook up my bluetooth remote to make it do specific things in home assistant

[midnight adder]

Oh, the Matter change?

so not so much BT, but support for BT? :0

[mint estuary]

yeah lol sorry

[midnight adder]

If you find out, please ping me and let me know 🙂

[mint estuary]

https://github.com/fsievers22/esphome-ble-remote

this is the closest ive found but cant get it to work at all

[forest edge]

printed this doorbell wedge.. thing looks like a masterpiece that fits together like a glove but...

[midnight adder]

I stay away from anything that says ESP., I'm not smart enough for those

[forest edge]

it's just not a big enough angle i want

so back to the drawing board

[midnight adder]

Link?

[forest edge]

link to what?

[midnight adder]

The thing you printed but not right angle?

[forest edge]

not sure I can link it. i made it

[midnight adder]

Oh, thought you were having issue with a pre-made design. I was gonna look to see if i could re-model angle. Its one of the things i don't suck at 😄

[forest edge]

oh no, i took the idea of off on thingiverse but remade it using that same angle but it wasn't enough

[mint estuary]

@midnight adder hahaha all I do are esp things i love building! you are smart enough if I can do it anyone can haha

[midnight adder]

No one is dumb enough that they can't do most things. It just takes some of us much much longer. And I don't have the time for that 😉

[mint estuary]

yeah I've been doing arduinos since 13....bit of a deep dive

[midnight adder]

I'm currently on a long-term project.
Making a smart-vent, from scratch, supporting Zigbee using the Ox64

https://www.amazon.com/dp/B07TLHNXJT?tag=thesmartcave-20&linkCode=ogi&th=1&psc=1

Think I could easily easily easily get it to <$30 each.

[mint estuary]

i may be able to help with that haha

do you 3d print?

[midnight adder]

Yup, haha

Started yesterday, got first drafts coming through today.

[mint estuary]

i did see a smartvent on thingaverse lately

[midnight adder]

Dammit, link plz

I'm too late? 😄

[mint estuary]

looking now haha

@midnight adder https://www.hackster.io/news/tony-brobston-s-3d-printed-esp8266-smart-vents-put-every-vent-in-your-home-under-mqtt-control-b7b85e412e6f

https://github.com/BrobstonCreations/yet-another-smart-vent

[midnight adder]

NOOOOOO

Their solution is much much pretier than mine would be

thanks so much 🙂

[mint estuary]

im sorryyyyyy but your welcome 🙂

[midnight adder]

On the bright side.

Now I don't have to do it.

[mint estuary]

saved you a ton of design

[midnight adder]

I still want it zigbee, so it gives me something to do

[mint estuary]

you can make it your own!

just like all my random projects haha

[midnight adder]

😄

Oh no, an ESP 😉

[mint estuary]

hahah

[midnight adder]

Our shared servers 💀

lol

canceling so many amazon orders rn 😛

Thanks again

[night zodiac]

oh, neat. klipper has magic scripts for lining things up

[mint estuary]

Lolol your welcome 🙂

This is my current remote and info thing I made from a Dreamcast VMU 🙂

@midnight adder left and right changes screens, sleep turns off backlight A button skips to the next song on my sonos and B button announces the time on my good speakers lol

[midnight adder]

cool!

[mint estuary]

Eventually it will be a keyfob for my Motorhomes and my little Nissan

🙂 thanks!!

[midnight adder]

I think I am reverting back to making my own. I really like 3d modeling, and don't want to give up on that part of my project

[mint estuary]

I respect that

Nothing better then knowing you designed it

[midnight adder]

🙂

[mint estuary]

I'm the same with my designs and my PCBs they are simple but I'm getting better and I'm so proud of them!!

[midnight adder]

! 😄

I also didn't like his part list (costs).

I'd think a $0.50 motor should work just as fine as a $7 or $15 one

And if i'm wrong, i'll have learned something

[midnight adder]

What do you use for PCB design

I used to use Cadence Allegro, but I can't afford $400,000 a year on a license :p

[mint estuary]

Just easyeda or fusion 360

Damn!!!!!

[midnight adder]

Fusion360 does PCB? TIL

[mint estuary]

I wanted altium but 10k for a permanent license is to much for me

Yepp fusion 360 electronics

[midnight adder]

Oh i was reading a difference Cadence Allegro "Available units range in price from $394,950 to $469,950. "

Apparently Cadence Allegro is only several thousand

USD $1,500/mo1 150 Tokens

[mint estuary]

Hmmm

[midnight adder]

different*

[midnight adder]

Same. I could "afford" it, but i definitely can't afford that

[mint estuary]

Yeahhh

[midnight adder]

ttyl

[forest edge]

i would like to buy a vowel

[clear ferry]

Exactly what I sliced as usual

[glacial knot]

spaghetti. But the supports are lacking a bit

[clear ferry]

Yeah forgot tree support for spaghetti

[glacial knot]

tree support? woodfill? 🙂

[night zodiac]

very pretty

I just have a couple more things to button up on my machine and it will be gooder

I need to find a piece of calibration paper. 🙂

this PROBE_CALIBRATE screen does not make sense to me. 🙂

https://share.busheezy.dev/i/TArV8L

it makes my bed wiggle

[clear ferry]

is your bltouch original @night zodiac ?

I should try and get klipper \ fluidd running sometime

[night zodiac]

yeah

so everything prints, meshes work and such

but I am trying to do this calibrate and if I do anything except -1 it just wiggles

feels like fucky stepper config but it works most of the time?

[clear ferry]

https://i.redd.it/ssy7roeb8j6a1.jpg

[finite atlas]

'murrica

[clever mortar]

I'm pretty sure Stupid is a universal constant

[finite atlas]

its more common in some places than others

[clear ferry]

I'm pretty sure it works like magnetism, there more there is the more it pools

Just like British teeth

https://tenor.com/view/british-vaping-british-vape-vaping-angry-british-gif-24817613

[glacial knot]

they might all have the same polarity

[static schooner]

https://github.com/BishopFox/unredacter

[night zodiac]

welp, I expected the Klipper discord to be able to help me but they had never seen what my stuff is doing before. 🙂

[glacial knot]

the unredacter is cute, but until it has a better than brute force approach to figure out font settings it's too annoying to use for low value targets

[static schooner]

yeah, the amount of work that you have to do and the resulting uncertainty makes it less useful

[glacial knot]

maybe if it came with some default profiles. WA iPhone, WA Android etc.

[clear ferry]

It would be easy to just assume comic sans for any target that is female above 45

[glacial knot]

yea, but which weight?

[clear ferry]

more than 9000

[shadow prawn]

It‘s over 9000!!!

https://tenor.com/view/vegeta-dragon-ball-z-unlimited-power-over9000-power-level-gif-12316102

[static schooner]

as with so many things, depixelization technology has its roots in porn

[clear ferry]

https://tenor.com/view/no-pixels-cant-see-ben-chang-community-ken-jeong-gif-17361588

[static schooner]

Japanese govt: you have to pixellate genitalia
Everyone else: fixed!

[night zodiac]

hrmm, I broke the settings i had working

neat!

[forest edge]

considering the height of paper is about 0.1 what else would you expect it to do but appear to "wiggle"? lol

[night zodiac]

nah, it's a problem with their shit

I'll show vidya

it's a temporary adjustment

[clear ferry]

https://tenor.com/view/hit-it-randy-marsh-south-park-s21e1-white-people-renovating-houses-gif-20621750

[night zodiac]

ear warning maybe

[clear ferry]

Have you mounted it with electrical tape?

[night zodiac]

wait, why is that video fucked

no, I am covering red LED with tape. 🙂

[forest edge]

is it sitting on the z stop?

[clear ferry]

[night zodiac]

no, I can make any adjustments with whole units

but less than whole units break

it's just with their PROBE_CALIBRATION mode

it operates normally outside of that

[clear ferry]

Microstepping you mean

[night zodiac]

https://tenor.com/YQUx.gif

if you save the video and play it without discord, it plays fine

[forest edge]

i see the bed bounce

[night zodiac]

gotcha

[forest edge]

the probe should be moving the head though shouldn't it?

considering the bed can't move in the z axis that suggests you got something messed up

[night zodiac]

this is a special script they have for doing your z offset with the piece of paper. I can move up and down with whole numbers but anything less than a whole number results in that bounce. You're supposed to run a command until you're scraping and then approve it but no worky.

[forest edge]

I watched that video a few times, that head is not what is moving

[night zodiac]

it's the bed going up and down

not sure what you mean. printer works fine

just the special mode of theirs is fucked

for me

[forest edge]

your ender can move the bed up and down?

[night zodiac]

it's an ender 5

[forest edge]

ah

I thought you had the 3

[night zodiac]

the other printer is a 3 clone

Sovol SV01

I'm going to break that one with klipper too once I'm sure I've fucked this one enough

[forest edge]

this whole two boards thing even when using octoprint i find dumb

they are more than capable of making a single board to handle all thus the part for klipper etc require an rpi to be nulled

[night zodiac]

klipper can use a pi zero

[forest edge]

my point is. they just make a single board that handles it all

at this point it's like, come up with a single board or bakes in usb ports on printers as a standard lol

[night zodiac]

https://share.busheezy.dev/i/76YtkC

[last cedar]

You mean like matter

So everyone can have a standard

That isn't actually compatable with anything else haha

[night zodiac]

yay, 5x5 points instead of 3x3

[clear ferry]

[orchid rose]

Great ending to a great game in a pretty good World Cup. Gratz Argentina!

[clear ferry]

https://i.redd.it/8k5hbi7c0j6a1.jpg

[night zodiac]

https://share.busheezy.dev/i/BXDF3F seems to work

[clear ferry]

Damn you and your good setup

[night zodiac]

I forgot to run the repeatability check while at room temp. dang

I'm going to run it anyways and see what it says

woooooo

I read that the probe is sensitive. 2 years after putting my grubby paws all over it. 🙂

// probe accuracy results: maximum 1.997500, minimum 1.985000, range 0.012500, average 1.990750, median 1.989375, standard deviation 0.004039

ahh, yes, numbers

https://paste.busheezy.dev/3GFT9H my config thus far

[clear ferry]

I need to try that with my 3d touch

Pretty sure it will fail

That will be a project for next year

[night zodiac]

is that a clone or just alternate product?

[clear ferry]

Clone

[forest edge]

from aliexpress

not bltouch, it's citouch

[night zodiac]

they have quite a bit of docs for clones

you'll probably be able to get 'er going

[clear ferry]

GitHub says it's hit and miss

And my last test was a failure

[night zodiac]

I gotta know how much cheaper a clone is

please tell

extremely cheap. nice

$10

[forest edge]

6.00 krone

[orchid rose]

you value their monopoly money a lot higher than most people

[clear ferry]

laughs in Finnish Mark

Now y'all euro cows

[glacial knot]

🐄

you just wish you could print dollars on your 3D printer

[night zodiac]

if you find a shitty coin operated machine, you can

[orchid rose]

I mean the cow is the one getting milked and I don't think it's us

[clear ferry]

They are milking all the beautiful finnish girls out of finland

[night zodiac]

D:

[orchid rose]

I'm still here so they are missing out

[clear ferry]

ngl

finnish women are beautiful

far superior to swedish

[glacial knot]

most coins will check properties that aren't easily printed. Especially with plastics

is your wife finnish?

[clear ferry]

she is not

I am of finnish heritage though

[orchid rose]

oh no

[glacial knot]

so it's only the women 😂

[clear ferry]

https://en.wikipedia.org/wiki/Kven_people

[orchid rose]

oh those, that's quite interesting

were you born up there or your family had moved?

[clear ferry]

My grandmother on my fathers side was born in the area where they settled

So, we have in Norway Fjellfinner (mountain finns) , Skogfinner (forest finns) and kvener

[forest edge]

is there really a difference between "the sticks" and "the sticks" tho

[orchid rose]

And these are both different from the Sami who also lived up there afaik. It gets very confusing

[clear ferry]

yes

the sami are the indiginous people

who settled in all the northern scandinavian contries

similar to the Inuits

also often referenced in conjunction with the Indian (Native Americans)

There is also difference between Sørsamer (southern sami) and Nordsamer (northern sami)

[orchid rose]

The recent controversy here involved the Forest Sami

[clear ferry]

we don't have those I think 🤔

[orchid rose]

It seems to get very territorial once you go north

[clear ferry]

you have the kalavala something too right ?

[orchid rose]

Kalevala was written by a Finnish poet based on the stories

[static schooner]

@last plaza ?

[clear ferry]

hmmm what was that name again

like 50 people or something

that live between russia and finland

I saw a documentary once

[orchid rose]

I'm not familiar with that I don't think

[clear ferry]

Karelians maybe

[night zodiac]

Klingon

[orchid rose]

Oh yeah there were plenty of of other Finnic peoples east and south. Karelians were integrated after WWII and others "disappeared" during the Soviet rule

[clear ferry]

Hyvää Simo Häyhä

That's a perfect male ideal

[night zodiac]

might be a bit too far

[forest edge]

is that urinal cake?

[night zodiac]

https://www.myminifactory.com/object/3d-print-bat-smartphone-stand-25830

[clear ferry]

that looks perfect first level

[night zodiac]

atx, thanks

wasn't sure

[clear ferry]

whenever my prints look like that I'm dumbfounded

[forest edge]

i wouldn't trust that to hold my phone

[clear ferry]

https://tenor.com/baV2s.gif

[night zodiac]

I was trying to find examples of too far but nothing looked like this

[clear ferry]

You mean this

[night zodiac]

nice

my z offset is exactly 2.0

so it's suspicious

[clear ferry]

https://tenor.com/Ptjd.gif

[low harness]

That looks too high to me.

You can see the second layer through the first.

[clear ferry]

pff marginally tbh

[forest edge]

shouldn't to set a z offset if this is the printer with the bltouch

[night zodiac]

no, you still have to tell it how far it is from the bed

[forest edge]

you need to paper gauge it

[night zodiac]

yeah, lol

[forest edge]

I had to 3d print my bltouch mount. so i know when i go to install it shits gonna be fun(not fun)

[clear ferry]

no, the offset is how far the probe is from the nozzle

[forest edge]

https://www.amazon.com/Feeler-Thickness-Metric-Filler-Measurement/dp/B07QWLVRG3 hang one on the printer lol

[clear ferry]

both in X Y Z dimensions

[night zodiac]

https://share.busheezy.dev/i/JqkLhY

I just work here

[clear ferry]

yes, distance between nozzle and probe

or, nozzle and bed in relation to probe

if you are pedantic

[night zodiac]

YEAH, I GET IT

[clear ferry]

DO YOU

[night zodiac]

https://tenor.com/bKpQs.gif

[clear ferry]

SHOW ME WHAT YOU GOT

[night zodiac]

https://tenor.com/3K7F.gif

[forest edge]

i wonder if in the future people will have this as their exterior on homes. https://youtu.be/PvOTMXAOyoY

shingled led panels

[finite atlas]

why would they?

solar panels would make a lot more sense

[night zodiac]

I'm giving 2.1 a try

[orchid rose]

vertical solar panels in the middle of New York? I doubt it

[night zodiac]

I never did figure out why my printer is rotated 180 now

my back is now my front and my front is now my back

[finite atlas]

sonoma said homes, not hell

[orchid rose]

haha

[last cedar]

You have it in Australian mode

[night zodiac]

atx, are you using smoothing?

I mean pressure advance

[last cedar]

Try putting some coal on the bed and it will go into barbie mode and sort itself

Says in point 27 of the FAQ

[clear ferry]

I played with Pressure advance before

Never got it right

[night zodiac]

did you do the tower method

[clear ferry]

Yes

[night zodiac]

https://ellis3dp.com/Print-Tuning-Guide/articles/pressure_linear_advance/pattern_method.html going to see if I can break my printer with this person's script

I think my zhop is too low

for this script, that is

[clear ferry]

Just do zhop 200

Looks fun

If nothing else

[night zodiac]

lol

they defaulted it to .1

raised it to .5

and increased retraction distance which was very low

[clear ferry]

Retraction 400mm

https://tenor.com/view/novy-start-handy-man-maintenance-repairman-udrzba-gif-25063685

[night zodiac]

it's running much gooder now

I'll let you know how this method goes

did you see how pretty my first layer is now

[clear ferry]

https://tenor.com/view/sploosh-archer-pam-poovey-amber-nash-lana-kane-gif-5663846

[night zodiac]

I'm a professional

/s

https://tenor.com/91Vt.gif

[clear ferry]

Minimal stringing

Looks very good from here

[night zodiac]

0.45 maybe

[clear ferry]

Flow might be a little low

[night zodiac]

yeah, this is weird generated gcode for figuring out the pressure advance

https://ellis3dp.com/Print-Tuning-Guide/articles/pressure_linear_advance/pattern_method.html

[night zodiac]

hrmm, I feel like I definitely made things uglier. 🙂

[shy cradle]

Norge? ✌️

I'm looking for that "special someone" 😜😅

I'm working on a website/game/store/"whatever" 😜

It's a pretty simple idea with rather major earning potential, I'm willing to throw a decent amount of change into marketing, physical equipment and getting the necessary business side of things done👍

But I'm not confident in my own coding skills to degree I feel I have to be, and also running the project solo might get time consuming for one person if it kicks off 👀

So if you're bored, feel you can actually be a lead programmer with large amounts of currency (ie layers of security), DM ME ✌️
You don't stand to lose anything but time should it not pan out, as Opposed to me 😅

[forest edge]

@night zodiac

thats after flipping it on it's side a few times. thought for sure that was gonna mess up my level lol

[last cedar]

I can help you make it raccoon proof, but only accept payment in doormats

(But on a serious note) Good luck!

[forest edge]

speaking of racoons.. need more filament

[shy cradle]

I was going to offer you a box with some blankets and a can of dogfood for the job 😅✌️

[last cedar]

You have peaked my interest, we may be able to come to some kind of arrangement

[last cedar]

YEAH

Not sending another helper, nice try though

[shy cradle]

Wish we hade those awesome trash pandas here 😕

[last cedar]

Same here, I live in Sweden

[shy cradle]

Ah, søta bror ✌️

[last cedar]

They are to be shot on sight 😦

[forest edge]

./grabs his gun

[shy cradle]

Swedes or pandas? 👀

[forest edge]

https://tenor.com/view/acme-daffy-duck-gif-8909993

[last cedar]

https://tenor.com/view/why-not-both-why-not-take-both-gif-11478682

[shy cradle]

Where would I then drive to get my cheap meat and soda fix 🤔

[last cedar]

Aha, you make use of the distance to the border, smart.

I mean, I do like it here, but it is an adjustment (moved in 2009 from England)

[last cedar]

Hits right in the childhood haha

[shy cradle]

Sweden FTW ✌️

[last cedar]

NICE

I am hungry now

[forest edge]

quite the twix bar

[last cedar]

Yeah, that is a normal portion in Sweden

[shy cradle]

20 bars, the mars and snickers are only 10..

[last cedar]

It is for keeping your mooses energy topped up so it starts in the morning

[shy cradle]

Hey, that's racist 😅🙈

[last cedar]

99% sure there has been a moose on my garden, giant hoof prints

[last cedar]

You don't have personal moose in Norway?!

Why is there no moose emoji

Ffs

Hey, discord devs, add a moose emoji, thanks ❤️

[shy cradle]

It happens, mostly deer outside my house tho, used to be a deer farm on the field so guess that's why the population is crazy here. For this year's hunt the government told land owners here to shoot at will 😅

[last cedar]

Poor Will, what did he do to deserve to be shot? 🤣

[shy cradle]

To be fair, my GF made elk roastbeef for dinner the other day, so guess I'm not getting in to town anymore 👀😅

The Norwegian equivalent of eating your car I guess🤙

[last cedar]

Yupp!

Nice sunrise this morning anyway

[forest edge]

selfish.. how is anyone else suppose to see those xmas lights on the inside of your deck?

[clear ferry]

https://twitter.com/NWSWPC/status/1604537556812541953?s=20&t=QP_p_A7L5O_m3lFg41louQ

NWS Weather Prediction Center (@NWSWPC)

A frigid Arctic airmass will plunge southward throughout this week, bringing dangerously cold temps & wind chills across the Central & Eastern U.S. As you finish your holiday shopping, take action to protect yourself from the cold. Cold weather safety: https://t.co/cDajZfk6D6

Likes

192

▶ Play video

Twitter · Dec 18, 2022, 6:02 PM

Yikes

[forest edge]

yay i get no purple lol

[last cedar]

F*ck other people

Nah, I aim to put some lights on the balcony to deter criminals and coyote lovers

And I haven't got that far yet, so I just smashed them up

[forest edge]

where there are coyotes there are racoons.. you should maybe embrace the predator

[last cedar]

Well it is actually wolves and contrary to popular belief, I am the only raccoon

https://tenor.com/view/funny-raccoon-hail-king-crown-gif-15551856

Like that

Without the worshipers

[forest edge]

ugh

print faster!

[pallid willow]

XYZ daVinci vibes

[late gate]

Merry Christmas!

[forest edge]

that second line isn't faint enough. better stock up on diapers

[late gate]

Everyone at work is sick (small company with 5-6 people). Luckily we have home office. Just cause one of them had to go to work having a cold

[clear ferry]

Home office 4 lyfe

none of that mingle nonsense

This was the least flattering image of Tom Cruise I've ever seen

It almost looked like some double

[night zodiac]

I think I had a dream of 3d printers last night

[clear ferry]

was it metrosexual ?

[night zodiac]

sure

🙂

https://tenor.com/bbWYT.gif

[clear ferry]

Hey, that's me on public transport

[night zodiac]

I need to flip these around so I can reach

Start the adventure of redoing the sovol

[glacial knot]

yes flip them over 😉

[night zodiac]

...

[forest edge]

just watched a video where a dude did just that to prove they work just fine upside down lol

[night zodiac]

I just seent your picture Sonoma, very nice

the mesh

[forest edge]

yet i still have adhesion issues. trying to figure that out

i can print single or multiple small part in the middle but some areas outside the middle it goes to shit

[night zodiac]

how many points are you using?

[forest edge]

25

[night zodiac]

you lined up the x and y offset so the nozzle and probe know how far they are from each other?

[forest edge]

oh yea.. it's not a height issue. gotta be something with my slices

or temps

hell my z offset is only -2.39mm

[night zodiac]

but I didn't say z, lol

I'll just assume that means you lined up x and y too

https://www.klipper3d.org/Probe_Calibrate.html#calibrating-probe-x-and-y-offsets

[forest edge]

not using klipper

https://youtu.be/HkvQywg_uZA

but yes

[night zodiac]

ahhhh, why did I assume you were

your screenshots looked like it in my head

[clear ferry]

Fun fact for y'all

Last phone call over copper was done in Norway today

[night zodiac]

waits for fun

[clear ferry]

Copper is now 100% retired

[night zodiac]

https://tenor.com/blwSX.gif

[clear ferry]

[umbral cliff]

I forget phones go over copper in some places, given majority of australian phone services are VoIP basically now

[clear ferry]

We moved to VoIP in 2006 at home

But this was the last rural person

Haven't had VoIP either since 2012 though

[night zodiac]

I talk loudly and firmly into a banana

https://tenor.com/bhrwT.gif

[clear ferry]

https://tenor.com/view/asdadasdasd-gif-18092639

[static schooner]

Many of our "phone lines" in the US have been disconnected and people just use cell phones. I, for instance, haven't had a landline at all since 2012

[clear ferry]

I heard they are still popular in Missouri

[orchid rose]

Since you're present, Is the electricity price really capped at 0.07€/kWh? in Norway?

[clear ferry]

Almost

[finite atlas]

so now you transfer electricity via astrology and magic stones?

[clear ferry]

State covers 90% of average price over €0.07

[orchid rose]

Okay that's what I read too. Your household must be quite expensive for the taxpayer lol

How much did you consume?

[umbral cliff]

Home phones are great fun though

[clear ferry]

1500-2000kwh per month ish

[orchid rose]

Okay, that's not too bad

heating included?

[static schooner]

https://tenor.com/view/huggenkiss-moe-amanda-simpsons-simpsons-prank-gif-25071650

[clear ferry]

Was actually higher

[fathom sparrow]

that seems high

[orchid rose]

That's about 700€ paid by the government every month. Not too shabby

[static schooner]

I expect that's coming out of your taxes, so...

[fathom sparrow]

my high months are 1500kwh

[orchid rose]

oil sales more likely in the case of Norway but yeah same thing

[fathom sparrow]

I'm at $0.05308/kwh

[silent dove]

@cold marlin I converted your message into a file since it's above 15 lines :+1:

[orchid rose]

Decent wind here lately so it's now 0.3'ish €/kWh. We had some days that were about twice that

[umbral cliff]

I pay roughly 0.13 EUR/kWh

[fathom sparrow]

that seems expensive

[orchid rose]

Energy producers are making absolute bank here atm since their production costs haven't even budged but we pay almost 10x the normal price

[fathom sparrow]

almost triple what I pay

[umbral cliff]

First time its dropped in around 9 years, since state gov signed a renewables deal, I was paying 0.16-0.18EUR/kWh last year

[fathom sparrow]

oof

[clear ferry]

We use 0 gas and 0 oil

[night zodiac]

100's of souls

[clear ferry]

We used to be at $0.001 per kwh, right now we are at $0.7 which is why state is subsidizing us

[night zodiac]

o.O

O.o

[static schooner]

it's mean to dress up your kid like that

[clear ferry]

My eldest put her halloween mask on my youngest childs jumping cow

[night zodiac]

I thought you were playing pokemon or something

[clear ferry]

https://tenor.com/view/doom-gif-25164052

[static schooner]

All the conference rooms in my building at work are named after Pokemon characters. Most seem like nonsense, so I'm clearly out of touch

We'll be having that exec review in Jigglepuff...

[night zodiac]

lots of possibilities

https://tenor.com/bx2ux.gif

[clear ferry]

yeah I heard jack was plugging Sally in Psyduck

[static schooner]

we do have a conf room called Psyduck

[clear ferry]

Expected

He is my favourite Pokémon

Even though my wife says I'm snorlax

[static schooner]

hmm, no snorlax

[clear ferry]

https://open.spotify.com/track/2mOgXtb1jU8AVFCgZOBxP7?si=CC7Wki52RcOqcGbkw9Q0WQ

[orchid rose]

Nice. Any idea what causes those lines near the top?

looks like the intervals are somewhat regular

[night zodiac]

It never did that before. Weird.

Maybe it did

I bet I know what it's from. I slowed down top and bottom layers and I think it's affecting it

[orchid rose]

I have no clue. None of my prints are that nice lol

[night zodiac]

I don't remember when I did this one but no lines

well, everywhere like above

oh, I did that like a month or two ago and the filament had been sitting out for a couple of years

the freshly opened filament gives quite a bit better results or if I'm not lazy and just dry it out a bit

the black filament is also the cheap stuff that came with my printer if I'm not wrong

I am pretty sure I just accidentally did that entire print at 50% speed

[clear ferry]

jesus christ calling american bank stuff

have to say stuff to the automatic system to do stuff

[night zodiac]

sir, this is a Wendy's

[clear ferry]

I just immediatly go "representaive"

we had phone systems like this in the 90s

they never lasted

[low harness]

The horizontal lines near the top could be a bent z-axis lead screw. Or just a dirty one if it's just the one print.

Looking good! I bet it's fast too?

[night zodiac]

maybe

I feel like redoing it but that's probably insane

I definitely did the print at 50% as well as had the top/bottom layers slowed down and was on the "dynamic" preset

I'm going to do one with standard preset

I'm a huge boat person lately

[umbral cliff]

They still exist worldwide. Alongside the press number for specific item

[clear ferry]

Press number we have

Voice control, no

[umbral cliff]

I see them come and go from where I've had to ring. Usually just spam 0 if I get one

[last cedar]

I would also like a huge boat

[finite atlas]

boats are not only joy, you have to maintain them aswell

[clear ferry]

Komm in mein boot

[night zodiac]

I read that like a vampire

[umbral cliff]

Atx is a vampire

[last cedar]

2 happy days in a boat owners life

|| the day you buy it, and the day you sell it ||

[night zodiac]

when they do the titanic scene and when they do the other titanic scene

https://tenor.com/by7hj.gif

[static schooner]

It's right over here, please take it!!

"A hole in the water that you throw money into"

[night zodiac]

A normal speed one

Lines 😦

[midnight adder]

loos like there is some play somewhere

maye bad bearings or bed on springs that are to loose so it can slightly move

[night zodiac]

Crazy what changing firmware can do, lol

[midnight adder]

ah you changed the FW

maybe higher accelerations than before ?

[night zodiac]

I think so from what I see whevener it moves. You're probably right

It works for everything I need so not really a big deal

[midnight adder]

can't wait to get my Bambu...

[night zodiac]

I realized I can lower my temp a bit too

[finite atlas]

my grandparents had lots of fun days on their small sailing yacht, but as they got older, they could not keep up with all the maintenance such a boat needs

[forest edge]

i feel like i spend more time tuning my printer than actually printing with it lol

[last cedar]

This is why my friend never prints me anything

"I can do pla, but pla is shit" hehe

[dusky plank]

Can we talk about cats and litter robots again?
This printer thing is getting out of control

[last cedar]

A very kind Norwegian stud is helping me though

[forest edge]

it is funny how pla just comes out good regardless and it's like worst of them all

[last cedar]

Sure, my friend printed a cat with live tissue and a litter robot from his 3d printer 🤣

Oh wait, you didn't want more 3d printer talk...

https://tenor.com/view/raccoon-ayasan-gif-24417807

[forest edge]

he wants to hear how the coyote had a good xmas dinner

[last cedar]

Years of experience from watching roadrunner, coyotes starve to death because they don't seem to be able to bend physics

Change my mind

[forest edge]

bend physics? there is no lazier chub than a racoon. one only has to put a couple of pieces of popcorn in thier opened mouth and its like delivery to your stomach

[last cedar]

Why is why they make shit pets

But the little hands are just omg

https://tenor.com/view/raccoons-hands-creepy-horror-deep-gif-8584315

[forest edge]

oh i dunno. not much worse than a cat. even cats can open doors etc

[last cedar]

We have 1 cat that opens door and stuff, I would say she is above average. The others can't even push open an open door haha, she can like open closed ones

[forest edge]

yea I have one that's figured out how the door handles work

even seen him paw at the deadbolt but thankfully that has enough resistance he can't just bat that open

oh thank god the layers are sticking aghain. thought i was gonna have to chuck this printer

[last cedar]

Or post it to meeeeeeeee haha

[forest edge]

just take atx's.. not like he uses his for anything worthwhile anyways

[dusky plank]

my discord does not load the server image anymore

ah, now its back again

[forest edge]

took a bit but the effects of covid is hitting the internet

[forest edge]

https://youtu.be/6wBrOV2FJM8

[dusky plank]

wtf are these pis ?

[forest edge]

those huge lego convention people would be all over that shit

[dusky plank]

cool, TIL about RPI rp2040

[low harness]

Ugh. If you have to do "ASMR" videos, at least make an effort to avoid side noise, like sleeves scraping the table and blowing into the microphone.

[last cedar]

https://tenor.com/view/possum-eat-cute-hungry-gif-15809068

Or noiseless asmr

[forest edge]

https://tenor.com/view/appurv-gupta-the-laugh-club-comedy-bar-comedy-stint-mic-blowing-gif-12085390

[clear ferry]

We had freezing rain / hail last night

Very fun

Crunchy snow

When it says both pling and splosh when hitting the window you know it is going to be fun

[last cedar]

Your poor car 😦 was so clean like a week ago

[clear ferry]

it is still clean

under the ice

[last cedar]

https://tenor.com/view/doubt-press-x-la-noire-meme-x-button-gif-19259237

[forest edge]

https://fiber-punk.com/

kind of neat for those who can't afford a pi atm lol

[keen bridge]

Did I find @last cedar's Mastodon account? https://mastodon.social/@The_Tim/109544280148118248

[forest edge]

rabies.. poor thing needs to be put down

[clear ferry]

look at me, I'm human

[clear ferry]

https://youtu.be/MGD0I5qdw8c

[last cedar]

Snow is just LIT

Yellow snow is my fav

[finite atlas]

tastes funny

[night zodiac]

https://i.redd.it/v0ivdiefpy6a1.png

[static schooner]

Recreation of the Chicago Fire is a nice touch

[night zodiac]

I posted a video of a raccoon just now and immediately realized that someone probably already posted it this morning. I was correct.

[last cedar]

Gotta be quick to beat the early raccoon

[night zodiac]

I finally got another sensor put together. averaging one per month atm

I printed all of these cases like a month ago

[night zodiac]

I just got a notification that my ESPN+ is about to renew o.O

I don't watch sports, dehell

[clear ferry]

[last cedar]

That raccoon in the background looks lovely

[static schooner]

Raccoons are a standard part of a Christmas village

[last cedar]

Yeah, stealing all the food

And doormats

[clear ferry]

On the first day of Christmas my true love gave to me

https://tenor.com/view/raccoon-aaaaaa-gif-20638663

[last cedar]

There is a possum version too

Where did I put it

There we go