what are yoiu watching @runic elbow
#general-chat
abstract violet
runic elbow
Assassination Classroom.
I might need to do some slight overclocking to get it to work with fullscreen.
At least I think that's how it works.
built in ad blocker works on Crunchyroll! Ad free anime! And on a legal source! Awesome!
I will now proceed to have an all night marathon of Assassination Classroom.
Just because the Pi can do it.
hollow oasis
@dusty citrus that's an amazing bit of knowledge to have! Thanks for sharing it
vast condor
There's also a guide to get the native Netflix app working on the Pi. I guess there's problems using in the browser, so someone got it working an alternative way. I'll see if I can find the guide
Here's the link: https://youtu.be/gAL3v5uNH2E
stuck moth
@thin rose @spare ether did you get splatoon 2 yet?
thin rose
@stuck moth nope, I should check it out though
thin rose
@stuck moth Oh!
stuck moth
its a shooter so their are lots of guns and such
but they shoot ink
(which could be wild if you actually shot a liquid)
there is also an ink backpack I think
spare ether
oh will have to check it out
stuck moth
we should friend each other too
spare ether
totally ! will go ahead and finally update the firmware ๐
thin rose
@stuck moth i think my user is noepixil
stuck moth
?
iron pond
list of members in role admin
stuck moth
me ๐
iron pond
oh
@stuck moth why
oh ok
its just that owner has all permissions
who is adafruit anyway
stuck moth
its phil
indigo jetty
@polar wraith the quality of that xaomi camera seems really good
Although an ergonomics expert is going to be on to you about the lean over to the laptop ๐
hollow oasis
@polar wraith which xiaomi you are using?
polar wraith
@hollow oasis It's the Miaji
hollow oasis
Miaji?
Oh Mijia!
Oh my it is pretty!
I can see lots of uses for this
You can go on virtual hikes
polar wraith
Yup, sorry, I misplaced the "a" ๐
hollow oasis
Xiaomi has some really nice devices
polar wraith
It's quite compact, too. About half the size of an iPhone 7 plus.
Thicker, but still pretty flat.
hollow oasis
How would you hold it?
indigo jetty
I guess it's gotta be a helmet or something
So it can see both sides
Sorry if you are walking I mean
polar wraith
It comes with a small tripod so you can set it on a desk, for example. I'm also experimenting with a selfie stick for walking around.
indigo jetty
I'm kinda wondering what my next purchase will be for making videos
I was thinking about getting a good Dslr
But when I see some of the videos people make with higher end phones I'm kind of wondering should I go that route
As I would also gain a nice phone!
polar wraith
I got a NIkon D3300 for astrophotography and have used it to make videos. It's acceptable, though I need about a 17mm lens for it.
Phones actually work pretty well.
polar wraith
That is true...
I just have a DSLR for astrophotography anyway... I'm not sure I'd buy one just for video.
One of my astrophotography shots.
hollow oasis
Any recommendations for cheap rework stations?
Aw wow!
That's beautiful! I'd use it for a background
polar wraith
I have. I also printed it on 8x10 metallic paper, which enhances the contrast even farther.
hollow oasis
๐
polar wraith
hollow oasis
Nope
indigo jetty
Or at least not US based is what I really mean
indigo jetty
Ah OK, I was just going to mention that most of the solder station stuff on adafruit is probably only 110v tolerant
Or at least worth double checking
hollow oasis
Oh yeah. I busted a lamp from the US that I brough to Asia.
hollow oasis
Yeah, it wasn't marked. Was a pretty nice soldering lamp too
Oh well. Live and learn I guess!
indigo jetty
I don't have a hot air station, would kind of like one but I can't justify it!
hollow oasis
You can make really tiny things. It does open up a lot of possibilities!
Of course you can watch the pro at work: https://www.youtube.com/watch?v=5apAOI7j4hE
indigo jetty
I bought a few sop8 to dip8 adapters
Yeah I've never done any board design for either
polar wraith
I think I'm going to chicken out on hand soldering SMDs. I'll just stencil my boards and use Microsoft's reflow ovens. ๐
indigo jetty
It's on my todo list
hollow oasis
She did it with an iron O.o
polar wraith
I know. I'm intimidated.
indigo jetty
I'll be doing with an iron too
hollow oasis
๐ flux is magic
indigo jetty
I'll let you know how it goes once the slow boat from China delivers
See you in about 6 months ๐
hollow oasis
Haha your adapters?
indigo jetty
Both the ic and adapters
Hopefully it works out but I want to use the ic for polarity protection on my led light
hollow oasis
Oh doesn't china do epacket to Ireland?
indigo jetty
Where it will automatically switch the output voltage to the correct polarity regardless of input polarity
They do, but although super inconsistent the free delivery normally is about 3 weeks
hollow oasis
@polar wraith I'm jealous. My closest thing to a reflow would probably be a refurbished toaster
indigo jetty
And I've tonnes of projects that I should be working on in between ๐
hollow oasis
Oh nice!
I do recommend epacket though, it is paid, but it does get to you before you forget what you got the component for
It's pretty early in Ireland isn't it?
Stuff like this
hollow oasis
Woops! my bad.
indigo jetty
I'm terrible at timezones
hollow oasis
Me too
polar wraith
@hollow oasis I was going to go that route but then I found out there are reflow ovens I can use. Much better. ๐
indigo jetty
Especially when @polar wraith is sending good morning to people before I even leave my house ๐
polar wraith
Hahahaha. I got to work at 0500 today.
hollow oasis
@polar wraith I'd say! Wow that's early
polar wraith
Lots to do.
hollow oasis
@polar wraith What do you do for a living?
indigo jetty
Finished your hackathon?
polar wraith
I'm a senior security program manager at Microsoft, focused mostly on incident response and government operatios.
operations
@indigo jetty No, not by a long shot! We're going to try to have it up and working by the 15th so we can observe the eclipse on the 21st.
hollow oasis
@polar wraith That's a lot of responsibility!
polar wraith
@hollow oasis Yes, but I like it. It's a great work environment!
hollow oasis
@polar wraith Definitely! Either you love your work or are extremely disciplined to be at the office at 0500!
polar wraith
Just insomnia. ๐
hollow oasis
Ah
polar wraith
But I do love my work. And I can tinker with Adafruit bits while I'm here, which is nice.
indigo jetty
My work seem to like the idea of doing innovative stuff like hardware projects
polar wraith
Today's tinkering is trying to make an ArduiCam camera system work with CircuitPython on a Metro M0 Express.
That's great, @indigo jetty
indigo jetty
But the hoops I'd need to jump through is crazy
Like no way am I getting a esp8266 on the internal network
hollow oasis
Oh man that sounds like quite a challenge. I worked once with a OV2560 before, wasn't too fun
polar wraith
Really? They're pretty innocuous. Of course, it's better if you have a test or guest network.
@hollow oasis Yeah, I'm not really looking forward to it.
indigo jetty
And even to get a standard Arduino so I could write to it from my work laptop I would need to submit a business justification form
So I could get my USB port open on my laptop
polar wraith
Oh goodness!
hollow oasis
Sounds really locked down
indigo jetty
It's understandable in some ways, given the nature of the business (financial services) they need to by hyper careful
Just to make sure we don't lose all your 401k ๐
polar wraith
Well, yes, I suppose that's true!
indigo jetty
At the cost of sleep mostly ๐
polar wraith
One, I don't sleep much. Two, my family lives across the country. Three, I live next door to my workplace, so it's a six minute walk from door to door. Put that together and there's ample time for electronics projects!
indigo jetty
It's my main hobby, I don't really "go out" (go to bars etc), I don't watch much tv or play too much games
I kind of live in the middle of no where so there is not much temptation in the way of events etc!
It's tough though, sometimes at the end of a long day the last thing you want to do is work on something
But I love the output from these physical projects
I'm a pretty determined person
I don't get as much done as I'd like but it's normally from a lack of trying!
Although I do watch Game of Thrones which I saw you are watching too @polar wraith
Season has been great so far
polar wraith
Yes, the ending of Sunday's episode was fantastic. Poor Jamie. Just when he's feeling smug....
indigo jetty
Yeah
hollow oasis
Hahah spoilers!
Same. I feel exahusted at the end of the day too
I am interested in getting to know more about the other engineers at Adafruit
polar wraith
Only a little tiny spoiler.... But sorry.
hollow oasis
It's all good :)))
polar wraith
@hollow oasis I'm going to make a video interview of Scott, to talk about CircuitPython.
hollow oasis
@polar wraith Yessss!
indigo jetty
Scott is very active here (I think he lives here!) , the Ruiz brothers post pretty often too
Jp jumps on around the live streams I think
polar wraith
Yes, and PhilT and LadyAda are actually pretty frequent participants here, too.
hollow oasis
I got the idea when I was looking at the old Gemma.
A engineer by the name of Frank was mentioned.
I'd love to hear him talk about how he developed the bootloader
"WITH ALFREDO SAUCE!" = https://www.youtube.com/watch?v=oEmSM0tHnzU
polar wraith
Awww, man. That unfortunate feeling when you're at work and need a breadboard because you have two boards which both need 3.3v....
viral spruce
off-topic: if anyone here is planning on going to new york makerfaire, shoot me a dm so we can say hi ๐
@white elbow i wonder which boards those are ๐
polar wraith
@viral spruce RCWL0516 radar sensor and ArduCam OV5620 (?) SPI board.
viral spruce
OH, i was totally off
@polar wraith is it like the cmucam (http://www.cmucam.org/) at all?
polar wraith
Yes similar
And Naiomi is cracking me up tonight....
I'm trying to set up the camera and radar on the Metro M0 Express running circuitpython so it will take a picture when the sensor detects motion. I have the radar library written and working, I just need to get the camera connected and the drivers written.
polar wraith
Nope, haven't gotten that far!
viral spruce
๐
indigo jetty
A friend of mine got this for me for my birthday, a lillypad, leds and some conductive thread. Guess I better learn how to sew!
viral spruce
@indigo jetty If only there was a website for that ๐
hollow oasis
Aw @indigo jetty your friends understand you
indigo jetty
@hollow oasis yeah! I've been trying to get some of them into too, I have showed them some simple stuff
This friend is also helping with the webcontrol part of my led matrix
abstract violet
ancient rivet
import antigravity?
indigo jetty
My rotary encoders came today so I might get to put back in the palette changing stuff from @lost condor sousaphone code
I dunno if I'll get it done this evening though, I'm on putting baby to bed duty for the next couple of weeks
Be she doesn't like me doing that so much so it's an epic battle
abstract violet
@indigo jetty maybe she'll pick it up as a hobby eventually!
@indigo jetty then you guys could do show and tell togetha
indigo jetty
That would be the dream ๐
shes sitting on my lap at the moment while I try add in the second encoder
shes not that happy about it ๐
abstract violet
has she met the circuitplayground plushies? https://www.adafruit.com/product/1022
abstract violet
this month @indigo jetty ?
stuck moth
we have emojis!!!! @here 
white night
Hurrah! 
wicked jungle
runic elbow
elfin wave
polar wraith
My somewhat obvious favorite:
indigo jetty
I wish I did a better job of taking the palette stuff out of the sousaphone code ๐
We have working patterns, thanks @lost condor !
abstract violet
indigo jetty
I think i let some magic smoke out of my finger ...
remember to always dock your soldering iron!
abstract violet
@indigo jetty wooh cool! psychedelic
runic elbow
That is steller.
indigo jetty
the patterns are all @lost condor , they look great
finally finished soldering it today
lost condor
Awesome, man
sonic forge
Of course the emojis don't seem to work in the discord iOS app ๐ฉ
lost condor
So @indigo jetty, what's the part you were having trouble with regarding palettes?
indigo jetty
I just butchered your code is all
and I wasnt sure if I was better reverting back to yours or modifying mine
I should have just commented stuff out
My webcam is doing a not great job of picking it up
the matrix I mean
Some of the palletes dont seem to work with patterns (I think the ones with just colour names)
but the ones that do are amzing
I have the USA pin wheel on at the moment and I'm feeling very patriotic ๐
lost condor
Haha
Yeah the color names are solid colors
They don't look like anything, they're there mainly for the "fade" pattern
If I want a solid color
indigo jetty
ah cool
I got rif of the flickering too
#define FASTLED_ALLOW_INTERRUPTS 0
up the top of the sketch
although I have had the watchdog timer of the esp bark once
not sure if related
stuck moth
thats in settings on the left I believe
most folks are chatting in #live-broadcast-chat now
main lodge
yep, i just didn't want to spam it up
stuck moth
no worries ๐
viral spruce
off-topic, but very adafruit
...I wonder what the 2017 version of this picture would be....google glass? briefcase with electronics equipment in it? lotsa raspberry pis?
fallow cosmos
Glass got beaten back into the box for being too obtrusive...by folks with cameras and always on devices attached to thier hands 24/7
Mondo:)-
I think it was the first Hope someone was walking around as a gargoyle, pc strapped to their back and a early twiddler
Most of it would be PI3based now
viral spruce
backpack needs solar
bold turtle
My backpack actually has a hidden drawer in the bottom of it... which is 8/10 of why I got it
viral spruce
thats quite a deciding factor lol
bold turtle
Is the ONLY ONE I ahave ever seen
fallow cosmos
I used to sewn false bottoms into mine, for transporting cassette mix tapes that we were not supposed to be passing around. My youngest has a semi hidden side pocket for his local content captive portal
indigo jetty
Pulled the trigger on the ts100 soldering iron this morning
indigo jetty
May our houses hopefully not burn down ๐
I would be interested in hearing how you get on with it @hollow oasis
hollow oasis
Did you know that Atmel had to use USART when referring to UART because UART was copyrighted?
@indigo jetty As do I haha. I'll definitely let you know!
indigo jetty
The ts100 is heavily reviewed and recommended on YouTube
But as I mentioned before, I feel like I've been guerilla marketed cause all those people got them for free ๐
hollow oasis
Ah, there was a worrying review on the rework when the guy pulled it open and I saw how empty it was on the inside. But hey, it had 800+ purchases so
๐
Hahaha oh well. I make do with what I have!
Although the difference between a old, bad iron and a new bad iron is quite stark
Old and bad really doesn't work
But I picked up a hakko red and it works just fine.
abstract violet
@indigo jetty ooh you gonna try the custom firmware for it? Was just watching a review of the features
indigo jetty
Yeah!
runic elbow
I will forever have the New jingle stuck in my head.
runic elbow
I got the Gboard keyboard and the Google Now launcher. They are really nice.
Makes it feel like a version of Android newer then 4.4.
lost condor
@indigo jetty https://pastebin.com/iqBMCFbu
I'm not exactly sure what I was doing wrong with my circle math before, but this one seems to be correct.
Just changed methods (atan2 vs atan) and it seems to be correct now.
ยฏ_(ใ)_/ยฏ
indigo jetty
Cool thanks @lost condor !
abstract violet
compiler wasnt in the mood for that method name @lost condor xD
lost condor
Well, atan2 is the "common case" version of atan (finding the angle of an x and y pair)
Something was wrong with my math but I don't feel like figuring it out. ๐
@indigo jetty Now the circular patterns should be correct around the whole grid. Before they were actually just doing 0-180 repeated twice.
indigo jetty
Thanks @lost condor ,i won't get to try it out this evening though
This is my life this evening, trying to tidy up my office
Unfortunately that's the clean side
abstract violet
colour calibration sheets/passports cost so much for whatever reason.. $60...
stuck moth
whoa 82 folks online
abstract violet
@indigo jetty Discs!!!! lots of it
indigo jetty
Yeah, an ancient relic of the past!
Anyone want 200 blank dvd? ๐
Literally are probably worth more as Frisbees
My girlfriend when I checked discord earlier "you are addicted to what ever that is"
Probably not wrong
I don't know why I have so many blank dvds, I was into Wii nodding at one stage (never selling games or anything) I think I got them off a guy who was getting out of pirating dvds or something
I can't remember though!
abstract violet
haha cool @indigo jetty , I used to be really into ROM hacking ๐
indigo jetty
My final year project in college was a robot controlled via a Nintendo ds, that was the only time I did any console development
Unless a ouya counts
What did you hack @abstract violet?
abstract violet
@indigo jetty Mostly GBA games, also did Nintendo DS stuff but more on homebrew apps and such..
indigo jetty
Yeah, I've no idea what I used for mine
Found my report in my Gmail ๐
Apparently I used palib
For the ds homebrew
abstract violet
"If you're just getting started with NDS homebrew development then you should avoid PAlib, PAlib users and PAlib tutorials at all costs. They will give you bad advice and teach you programming methodologies which will hinder your progress and ensure that your projects are plagued with problems that will be nigh on impossible to fix."
abstract violet
haha, just shows how early Palib was
indigo jetty
It's funny how much of what I did in that project was linked to what I do now (hobby)
But I completely forgot about it!
Nothing too interesting in it
I'd love to have one of those robots nowadays though!
runic elbow
I wonder if something similar can be achieved with a Nintendo Wii.
Or maybe the original Xbox.
abstract violet
why not ๐
runic elbow
I would love to see someone flying a drone with a Wiimote.
Or driving a little car with an Xbox controller.
abstract violet
you could prolly skip the console bit and interface the controller directly!
runic elbow
Sounds interesting.
abstract violet
the wiimote can act like a regular bluetooth device
runic elbow
Really?
abstract violet
runic elbow
So I can use Wii emulators with a real Wiimote?
runic elbow
I gotta get myself one of these arduinos! Or can the same thing be achieved with a Pi?
runic elbow
Awesome! So I already have everything I need.
abstract violet
abstract violet
thats for general stuff, but i think this is what you are thinkin: http://www.instructables.com/id/Wiimote-Controller-Configuration-for-Raspberry-Pi-/
runic elbow
Thank you. I'll be sure to check that out.
abstract violet
I like that it has a bunch of sensors and buttons and all that
indigo jetty
The nunchuck speaks I2C as well afaik
abstract violet
@indigo jetty and the adafruit store stocks em i think!
ancient rivet
yes. nunchuck is i2c.
lost condor
Oooh
I never knew that
That means pro controller is too
Or not pro controller...whatever they called the wiimote attached controller.
That's weird, anyone know why the different colors of controller had different handshakes?
abstract violet
@lost condor probably revised over time, eg. Wiimote (OG) vs. Wiimote + WiiMotion Plus vs. Wiimote with built-in Wiimotion Plus
indigo jetty
The ir camera in the Wiimote should be i2c as well
I harvested one, but for some reason I never did anything with it
abstract violet
@indigo jetty what would you do with it?
@indigo jetty also, "harvested" reminds me of Horizon Zero Dawn.. hunting bots for parts
indigo jetty
My plan was to make a gimble that tracked you
If you were wearing an IR led
So maybe for recording something
Never got around to it anyways!
back to its project coffin i mean box
indigo jetty
There is an issue that the camera will pickup the ir led though
Anyone feel free to steal the idea, it's unlikely I'll get around to it
lost condor
Solution: Make the IR tracker part of your outfit. ๐
viral spruce
@indigo jetty could always track...with openCV!
bold turtle
OK, because I have been out of this loop for too long, and managed to recently acquire some hardware: What's the current best option for installing Actual Linux Packages on MacOS X?
hollow oasis
Anyone where keep a meticulous list of what SMD parts they buy and how they keep track of them?
@bold turtle I think brew still is
Just thinking, that using a 555 circuit, and an ATTiny85, and a M0, for one off projects, it makes much more sense to go for the M0
hollow oasis
Also interesting page: http://www.crossroadsfencing.com/ & http://crossroadsfencing.com/BobuinoRev17/index.html
It is a fencing and electronics site!
indigo jetty
Ha, an interesting combination!
abstract violet
first time setting up a raspberry pi using diet pi instead of raspbian lite -- I can finally sleep
hollow oasis
haha
viral spruce
@bold turtle You want Homebrew (https://brew.sh/). MacPorts is kinda depreciated at this point and a lot of people switched to Brew for their package manager ๐
dire viper
@viral spruce @bold turtle I am a professional software developer, and I second Homebrew. You can also use it to install .dmg packages through homebrew casks.
And since homebrew is scriptable, you can write a single dev environment bootstrap script for a new Mac, and be pretty quickly up to speed on a new machine.
sonic forge
@bold turtle same here, I use Homebrew mainly. But I recall having to use MacPorts a couple of times when Homebrew didn't have what I needed.
stuck moth
@hollow oasis I use spreadsheets to track my stock
spice moss
so homebrew beer or whine?
stuck moth
my stock of smd part
abstract violet
Adafruit gives me GAS.. gear acquisition syndrome
I feel like a Pokemon training -- catching em all
polar wraith
@abstract violet I actually maintain a wish list called "next order." It's sitting around 500 bucks right now....
abstract violet
@polar wraith waits for your unboxing videos hehe
polar wraith
LOL! Yeah, I'll have to make one. ๐
indigo jetty
I might try so one for the ts100, I am a little worried about uploading a lot of different types of content than I usually do
abstract violet
are you going to look into the fimware stuff? may be worth a bit in the video
indigo jetty
There is definitely plenty of YouTubers where I've been put off by a change of direction
I definitely will
abstract violet
no matter what you're making in electronics, you'll have to deal with a soldering iron
I think it fitz
indigo jetty
Simeone geirtz (shitty robot queen) is a prime example
abstract violet
I want to eventually build something like a shadow box with a buncha feathers -- maybe make the mount be a PCB (with silkscreen to match) & make them all blink --
indigo jetty
I still think she's funny, but I used to watch her for the shitty robots
And she the majority of her videos are not that anymore!
That sounds really cool
abstract violet
yeah sticking them to a plain board would be easy.. so have to make it complicated somewhat xD
but mainly i think they should at least blink or have some function, maybe a similar thing to what @stuck moth in a previous show and tell
lost condor
@indigo jetty Have you had a chance to try that new config yet?
indigo jetty
No I will get to first in the morning though
Family night tonight!
@abstract violet
Look familiar?
lost condor
Haha, awesome. I'm working on checking in the code generation capabilities, and wanted to make sure the math is right.
indigo jetty
It's beautiful so far, but I'm two minutes in
The dog is probably named after this guy
spice moss
hmm check this out guys https://buildazure.com/2017/07/25/azure-iot-developer-kit-preview-started-shipping/
spice moss
it looks like similar to microbit
nova raptor
Definitely does down there at that edge connector. I kinda dig the inlcuded oled tho.
indigo jetty
@abstract violet it's a really beautiful film
There is a lot of Irish bits in it (phrases etc)
And the art style is very celtic
spice moss
@nova raptor seems like adafruit edge connector what Ladyada designed for microbit work with it
abstract violet
@indigo jetty it made me want to visit that side of the world for sure, very charming atmosphere -- wouldnt mind living in a lighthouse 8)
@indigo jetty glad you enjoyed!
indigo jetty
I dont think the internet would be very good @abstract violet!
abstract violet
@indigo jetty I remember life before the internet ๐ minecraft lifestyle
polar wraith
So what fun projects will everyone be working on this weekend?
indigo jetty
@lost condor Which pattern would show it up best?
Probably will make a video on the BLE thing tomorrow morning
might try work on the Telegram learn guide Monday (public holiday)
I should also try squeeze some circuitry into the frame for the LED matrix
@abstract violet punch trees
indigo jetty
how about you @polar wraith ?
polar wraith
Making the ArduCam SPI/I2C camera work with CircuitPython, writing a motor shield driver in CircuitPython, maybe a little PCB design, and building my Lego Saturn V (assuming it arrived today).
spice moss
thinking to play with BLE so control drone from the custom app
polar wraith
That would be cool, @spice moss, but will it have the range you need?
spice moss
it's small drone so testing it for future use cases
polar wraith
Nice!
spice moss
i currently have one but if i can get it work from one then i can expand it
polar wraith
Gotta walk home from work. Should be back online in about 30 minutes.
spice moss
i am making some research by this as planning drone mobile squad where is different feature set of drones
dusty citrus
I'm writing a new CircuitPython pixel splitter/reorganizer...
hearty fiber
@polar wraith i really need to get working on a guide for my echo wand telecom project. Also want to slim down a pi3 to fit in my sega joystick
polar wraith
That's cool, too, @hearty fiber
@dusty citrus I'm not following. What does it do with the splitter?
lost condor
@indigo jetty It will show up best on the Spin pattern
Especially with the rainbow palette
dusty citrus
@polar wraith So CPX gives you 10 pixels, 0-9... that wrap around the ring.
What if you wanted to treat that like 2 5 pixel rows, going up from the bottom (let's imagine a sound meter with stereo)
Yes, you could write all sort of code, to 'fix' the display... but if you just had 2 strands of 5 each, and both were facing in same direction.... this lets you have that.
you end up with 2 pixel objects, each with 0-4 addressing, and the 'real' #9 is now #0, #8 is #1, etc..
Make sense now?
I did it the 'easy' way, and realized that potentially there is a bug , because calling write() on one of them also calls it on the other...
in most cases, won't matter, write is autmatic. To fix it, I'll have to create independent buffers... which I likely will... because it would allow you to double set things, and flip between them.... essentially 'sharing' pixels...
I'm calling it the NeoPixelDistort class... because it slices, dices, let's you do anything you want...
You can't directly mix pixels from different strands but that's what TonyD's NeopixelChain class does... this works with it, it inspired me to write this one.
Using that and this, you could take a 2+ strands, combine them into one, and then slice out new strands from the chain...
Example, if you wrapped one long set around a sphere, you could normally only address it via some complex math to figure out which pixel to light up for a given location... With this, you could create strands that run longitudes (north/south), and it just works. Set 0 to be the north pole, and the end to the south pole, and points between, and you're all set, never have to do the math again.
To be clear, you can feed in any list of pixels, and it'll make a new strand of them.
indigo jetty
It does seem more defined
@lost condor
my camera is terrible the blues look fine in person
also i pulled the signal wire to take the photo, i dont see any issues with the top left like I see in the picture
dusty citrus
are you doing any gamma correction?
lost condor
@indigo jetty Awesome, that's what it's supposed to look like.
@dusty citrus I think (but I'm not positive) the FastLED library allows you to arbitrarily split up your neopixels in the same way.
Looking at it, it looks like it expects the strips to be on different pins, though they can share the same buffer. However, I'm not sure it's really a problem if they are on the same pin. I'm going to do some tests
dusty citrus
@lost condor Cool, I haven't played with fastled much, I actually started this coding session wanting to port FastLED effects, and ended up coding this custom thing, just because it seemed like fun to work on... Got it working and now I'm rewriting it to work with the most current neopixel.py, and I might even fold TonyD's pixelchain functionality (which also isn't up to current neopixel code) so it does everything. (I might not fold it, but will bring it up to new code level)
that would mean that you could have hardware physical pin(s) to write to, but might have a pile of virtual strands, which might span multiple physical strands, and really, any combo of pixels you can imagine. (I'm adding slice support, based on current pixel code, too, since it's pretty easy to support that...)
lost condor
Ahhh, is this Python work? Sorry. ๐
runic elbow
Google Now launcher has OK Google on it, and it is very handy.
indigo jetty
Started recording the ble scanner video, I'm talking with the video for the first time to hopefully speed up the time it takes to make the video, I think it's going OK, although I stood up to get the screen to focus and was further from the mic, hopefully I can fix the levels in software
hollow oasis
@indigo jetty Awesome look forward to it!
indigo jetty
I have that section synced up and edited
I need to go through the code and the hardware and also do an introduction and and outro
Thanks @hollow oasis, hopefully it's interesting
It is actually a neat project
It was one I wanted to make for years
Even before I was into arduinos etc
polar wraith
@dusty citrus Thank you! That makes a lot of sense now.
indigo jetty
Finally have my office clean! nothing to stop the making now!
lost condor
@indigo jetty What do you use for video editing?
Also, I love back to school season. graph paper composition books for 50 cents.
indigo jetty
I use something called active presenter
It's almost like power point
It's not really a real video editor
For more informational videos or ones involving screen shares I recommend it
But nobody is making movies with this thing ๐
lost condor
Ahhh, OK. Heh
indigo jetty
Not published yet. I'm not too sure about parts of it.
There is a large volume change when I'm at my desk and when I'm at my computer. Any for some reason I have my eyes opened as wide as possible during on screen parts. Also, 20 mins..
viral spruce
@indigo jetty friendly advice: if you can, get a screencasting software so that you can zoom in on what you're talking about. Larger monitors create issues when recorded, can't really see 'em on a smaller one too well. Zooming in is the way to go instead of highlighting w/boxes
I'm partial to screenflow but camtasia (techsmith.com/video-editor.html) is similar on Windows.
alternatively you can zoom in on whatever editing software you use, it just felt a bit "far" to me. I liked the video a lot.
indigo jetty
Thanks @viral spruce
Especially since if you got the code part you put up with at least half of it ๐
That's good advice though
If you have any more feedback I'd be delighted to hear, even if negative! I'm very happy to try improve whenever I can so certainly am not offended by negative feedback
I know it's not exactly citizen kane of YouTube videos ๐
indigo jetty
throwing it out there, we'll see how it does
stuck moth
time to try player unknown's battlegrounds ๐
fair summit
@indigo jetty @viral spruce Camtasia is really superb but is an investment. I tried a bunch of free and cheaper ones at work for Windows and there really was no comparison.
indigo jetty
Nice @stuck moth !
Im playing at the moment too, but on the EU servers
Since the update on the Wednesday its a bit slow to connect
if you get the connecting screen with an empty loading bar for maybe 5 or 10 seconds click the reload icon up the top right
it will eventually timeout and prompt you to reconnect, but once it goes past the 5 or 10 seconds its not happening
stuck moth
@indigo jetty it crashed after my parachute deployed....
how do i force kill a windows app? end task in the task manager isn't working
spice moss
@stuck moth think that parachute deploy automatic in certain height
fair summit
@stuck moth are you already in the Processes tab in Task Manager? That should do it.
fair summit
gah
spice moss
I need atleast 512GB ssd as least of it seems in Desktop go fast
fair summit
Then it is waiting on a kernel resource or something like that. Do you have a fancy graphics card? Maybe driver issue.
fair summit
Someone suggests from CMD: taskkill /pid 1234 /f
spice moss
I have seen the game framedrops in good gear
stuck moth
how do I find the pid?
fair summit
Is there a Details tab in your task Manager? What version Windows? Right click on task and Properties?
stuck moth
@spice moss its more about what frames it renders
fair summit
I am in Ubuntu right now, can't try.
stuck moth
ah I see
spice moss
well the game need some optimizations to be done
fair summit
@stuck moth From Processes tab, if you right-click on the task and click "Go to Details" it will select the matching process.
Though that still may not work to kill it.
(I booted up the laptop to look)
fair summit
I see a reboot in your future.
stuck moth
it'll probably just crash again though. my compie is definitely under spec
the cpu is older than what they state and the gpu is at the minimum
fair summit
You might try a downloaded GPU driver from the company (e.g. Nvidia site) to be absolutely up to date. But I have certainly just seen things freeze up under load. Ah well.
stuck moth
its only 8gb ram too ๐
spice moss
with nvidia there geforce experience what helps with drivers thankfully
stuck moth
yeah, my gpu is amd
spice moss
was it catalyst in amd what keeps radeon drivers up to date
stuck moth
yup yup
stuck moth
now I'm cpu shopping ๐
indigo jetty
You must have been due an upgrade ๐
stuck moth
yeah, I think I bought it around 2012
indigo jetty
yeah me too, but it was pretty decent at the time i5-2500k still doing ok
I'll keep chugging away with it till there is something I cant do with it
polar wraith
My CPU is a 1,000 core Azure cluster? ๐
indigo jetty
Can it run games @polar wraith ๐
polar wraith
LOL nope.
indigo jetty
I think i got mine in late 2011, it was a pretty good spec machine at the time but literally the only thing I've added to it since is a SSD
Has served me well
Still havent won a game of PUBG, got another second tonight
(2 seconds tonight)
Time for bed, thankfully a public holiday tomorrow
What video where you thinking of doing @polar wraith ?
polar wraith
Kind of a poll. A sitting in the pool and talking about the projects have on my todo list, and asking what people think I should do next.
indigo jetty
I get very little responses to questions on my videos
polar wraith
Huh. Good info to have. I guess I'll skip it and just work on something. ๐
indigo jetty
I'd say 80% of my comments are asking for help
The rest being "thanks" and then a few comments on my accent ๐
Yeah I see the same with other small channels too, it makes sense I suppose
polar wraith
Yeah, I can see that in retrospect.
indigo jetty
I think at the level we are at i think making videos that you enjoy is the way to go. My one today, while i think overall its decent, and I'm pretty happy with it, it's not really the type of video that I would like to see. I'd prefer a more scripted and edited one
And kind of as a result I'm probably not as satisfied with it. Like my niche so far has been making 2 minute videos that share some useful information and this was the exact opposite nearly!
But the main reason I got into to YouTube is have a place to show off projects (which doesn't lend as well to the quick videos) so I'm a little in YouTube limbo at the moment!
Ime hoping to set up a stream in a few weeks. A friend of mine who is technical but has never done any Arduino is doing it with me, where he would start from scratch and I would explain it to him as we go along
polar wraith
That'll be cool!
indigo jetty
Yeah and he has good internet too so I can actually stream ๐
Riggins deciding 3:40 am is a good time to go outside
polar wraith
Puppy!
indigo jetty
He's deciding its not a good time to come back in now
Lieing down outside now
He's like a Pokemon that I don't have enough badges to control
weary fiber
Question for the history buffs in here: what is, in your opinion, the most useless treaty in history?
polar wraith
@Trilli Geek answer: the Washington Treaty limiting the size and number of capital ships.
spice moss
https://www.youtube.com/watch?v=BUM7y3v53OY @stuck moth if you want to make a desk PC and still have room for your macs
runic elbow
I love it.
spice moss
you think @swift hatch could do same to his workshop place so he have chat there by just press a button and it slide to reveal itself?
swift hatch
I like that idea @spice moss
I've been working on some drawer slides and linear actuators, so very timely
spice moss
my soldered SMD Circuit ruler board with hot air soldering iron with solder paste in 2002
@stuck moth for those i used soldering paste and it went that nicely in place all of them
runic elbow
I've learned the hard way that the WiFi services for YouTube on the Wii was shut down.
I should probably start homebrewing it soon if I want to do anything online with it.
indigo jetty
Guess you'll just have to make one @abstract violet ๐
runic elbow
Alexa could also turn on us.
proven olive
Nah, we need Alexa. How else are we going to get supplies?
runic elbow
Ok Google.
stuck moth
will save us from the robot uprising. we encourage robot friends
runic elbow
Ada...bot will save us. Is that the name?
stuck moth
Adabot is
runic elbow
Ok.
bold turtle
P is for Percussive Maintainance, and R is for Radical Disassembly?
indigo jetty
@stuck moth https://www.reddit.com/r/programming/comments/6s3tcu/atom_needs_a_whopping_845_megabytes_to_open_a_6mb
stuck moth
ยฏ_(ใ)_/ยฏ
thats what you get for building an editor in javascript on top of chromium (if understand it)
elfin wave
"Announcing Arduino.js: everything else has been ported there, so why not this?" would be a good April Fool's post
But then there's espruino, isn't there?
stuck moth
night all. off to "commute" home and head to a friend's for dinner
viral spruce
your discord friends - @rich onyx and @viral spruce on #manufacturingmonday today ๐ i see
I really liked the music dano picked
crude trench
if you were impressed by the battle scene in GOT S7E4, you might like that ^ video
(when I go off topic, I go way, way off topic)
stuck moth
at least its in #general-chat ๐
indigo jetty
Nothing is off topic in #general-chat
runic elbow
I found out IDE SSDs are a thing that exists.
Mostly Mini IDE. I haven't seen a regular IDE SSD yet.
runic elbow
Good thing Mini IDE to regular IDE adapters exist.
spice moss
this is pretty offtopic but can be used in background https://www.spotify.com/us/xbox/
runic elbow
It can do that on the PS4, so it might work on the Xbox One.
indigo jetty
elfin wave
my first thought was "that's a heavy duty plug!!" before realizing it probably wasn't US ๐
indigo jetty
Haha, it's an adapter but our plugs are a good bit "beefier" ok
It came with a EU plug
The UK plug is actually really well designed
It's bulky but very safe
That's a surprisingly interesting video on it
I always found US plugs insane
๐
elfin wave
I'm not saying they're great
I'm looking at houses now and it's become "my thing" to check all the plugs to see if they're grounded or not
we looked at one which had been flipped but none of the outlets were grounded, except in the kitchen and bathrooms
indigo jetty
There would have to be some really crazy wiring to see a house with out ground in UK or Ireland (we call it earth)
Like literally all our sockets have it
Looking forward to trying the iron out, although I don't think I currently have any outstanding soldering!
polar wraith
@indigo jetty Tom Scott is great! I love his videos!
indigo jetty
Yeah he's very fun!
polar wraith
Would love to meet him (and Matt) sometime....
abstract violet
@indigo jetty My parents worked/lived in the middle east when I was younger and had our house in the philippines built with all UK-standard stuff, all our electrial plugs/outlets etc looked like that! -- was frustrated mostly on lack of adapters but yeah ๐
indigo jetty
You can kind of stuff a EU plug in with a screw driver (don't do this)
I thought it was just UK and Ireland!
polar wraith
The screwdriver seems like a phenomenally bad idea. ๐
indigo jetty
it's funny the screw driver just puts us on par with the US plug ๐
You put it into the ground/earth plug to expose the live and neutral (as per toms video)
polar wraith
Still, messing with mains (110 or 220) makes me jumpy.
My son was electrocuted with 220 in Iraq (he survived but was unhappy).
indigo jetty
Funnily enough I worked with a electrician when I was younger and never got shocked
Turned on a faulty lamp and got one ๐
indigo jetty
I normally leave it to the professionals now
Haha
I would do the odd bits with relays
I was thinking today that my dad's shop has good internet, so in a couple of weeks I'm going to try a stream
polar wraith
Cool! Be sure to post the link before you start!
polar wraith
Ah, Sonoffs! A la Andreas Spiess!
indigo jetty
These are a device that have a relay and a esp8266 built in
I was thinking of maybe doing the stream on them
polar wraith
That would be cool! I haven't really looked at them much, but I've been meaning to look into them to see how they might be used.
indigo jetty
yeah, im the same
I have them a while
I made this last year for my Christmas lights
It was controlled via Alexa
So I'm going to replace it with the sonoff
polar wraith
That's good! It would be interesting to get an overview of the Sonoff ecosystem and the different control capabilities it has... (FWIW)
indigo jetty
yup thats the plan hopefully
flat lynx
so who's ready to start designing cosplay parts for the new Overwatch skins
indigo jetty
still havent played since PUBG
stuck moth
@indigo jetty I can't play PUBG until I upgrade my gaming box
just saw that intel is announcing details of their next gen on the 21st so I think I'll wait until then at least
indigo jetty
I'm very out of the PC component game but I hear a lot about AMD's Ryzen
But yeah probably worth waiting
stuck moth
yeah, I was too until PUBG crashed on me
now I'm realizing how large my back catelog on PC is ๐
stuck moth
feel free to show your art on #show-and-tell
proven bramble
oh oh okay
indigo jetty
The only other thing I would like to play at the moment is Doom
It looks great
and the soundtrack is amazing
I recorded a video od me using the TS100 for the first time, I'll probably upload it later if anyone wants to look at it, I wont be releasing the video unedited like that but if people are curious they are welcome to take a look
I want to try using the other tip that came with it and also take a look at the firmware stuff for @abstract violet ๐
First impressions are pretty good, im not really used to a conical tip anymore so I think i was making a bit of a mess of it
but it feels very premium
The laptop cable (basically) coming out of it may take some getting used to (just so its not in the way)
Might be one for adafruit to consider seeing as it is open source hardware
Maybe even a Adafruit branded one ๐
(although saying that i can't find all the stuff for it)
is the circuitry
abstract violet
@indigo jetty I like the sound of that 8)
would help with the development and improvement.
runic elbow
https://youtu.be/SjnqNPVXEvI This is my favorite commercial for Pikmin.
abstract violet
nice rhyme too
runic elbow
I love Pikmin.
abstract violet
its pretty slim
indigo jetty
Yeah it's very small
abstract violet
you ok @stuck moth
solar ridgeBOT
3D Hangouts - 11am ET Wednesdays
Show & Tell (YT only) - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Tony D - Evenings PST Fridays
stuck moth
ok @solar ridge is set up with a help for when shows are
elfin wave
Just passed the technician class ham radio exam! ๐
Got 18/35 on the General which is pretty good considering I hadn't started learning about it yet.
stuck moth
congrats @elfin wave !
hearty fiber
I see glen campbell passed away, everyone should play wichita lineman on their echo in rememberance. @night crescent ๐
dusty citrus
on their echo? Just ask Alexa to play it?
"Not in prime music" ๐ฆ
Galveston is (playing a Glen Campbell mix now, thanks to Alexa)
SIgh, and guess what, Witchita Lineman Is in the mix. #AlexaFail
Filed a bug report with Alexa.
night crescent
i was telling our team about glenn campell on monday
i suggested everyone listen to witchita lineman
what a song, what person, what a life
hearty fiber
I like the simpsons episode where homer sings the song
sturdy hawk
the news has lead me to rinestone cowboy that is a song I recognize.
bold turtle
I wish there were such a thing as a coffee-proof laptop
this is the third one my mother has managed to kill
not happy
viral spruce
@bold turtle the ol' thinkpads have trays for water underneath the keeboards
bold turtle
@viral spruce not entirely convinced she wouldn't still find a way.. assuming I had the money for one RN anyway
viral spruce
oh...yeah. I'm usually really gentle with computers (had my thinkpad for years and my macbook since '10 as a daily driver) so people spilling coffee on them I don't really relate to
upper fox
@solar ridge ?whois @upper fox
stuck moth
?whois @upper fox
solar ridgeBOT
ElectricCrowbar#4873
sturdy hawk
?whois @sturdy hawk
solar ridgeBOT
CMfly#5506
viral spruce
?whois @viral spruce
solar ridgeBOT
brentr#8076
ocean dagger
@solar ridge ?tag vermont
solar ridgeBOT
No tag vermont found.
viral spruce
vermont?
ocean dagger
Ya thats where I live. First thing that came to my mind
@solar ridge ?tag create Vermont
solar ridgeBOT
You must give a tag name and tag content.
viral spruce
OOH, a fellow new englander o/ (I go to college in MA)
ocean dagger
Oh nice I have quite a few clients from Mass, and know a lot of people who went to school there
viral spruce
I like skiing vermont though, your mountains are nicer than NH
ocean dagger
@solar ridge ?tag Vermont this is vermont content here
solar ridgeBOT
No tag Vermont found.
ocean dagger
@solar ridge ?tag create Vermont this is vermont content here
solar ridgeBOT
You don't have permissions to create or edit this tag.
ocean dagger
@solar ridge ?tag vermont content
solar ridgeBOT
No tag vermont found.
ocean dagger
@solar ridge ?modules
stuck moth
I turned tags off because I don't know how they are used
viral spruce
@ocean dagger ...just realized your username is literally "chillin in vt"
ocean dagger
@solar ridge ?queue
solar ridgeBOT
ocean dagger
@solar ridge ?queue list
solar ridgeBOT
The queue is empty.
ocean dagger
@solar ridge ?play https://www.youtube.com/watch?v=3HoDlGNTisI
@solar ridge ?google adafruit
Ya I am chillin in vt lol. Listening to tunes writing code....But I have to get back to work...ttyl
thin canopy
?whois @solar ridge
tiny moat
@whois @tiny moat
thin canopy
@solar ridge ?home
proven olive
?whois Andon
solar ridgeBOT
Andon#8175
proven olive
Huh, didn't realize I've been on Discord almost two years.
lost condor
?whois @lost condor
solar ridgeBOT
JonXP#6453
lost condor
Fun stuff
proven olive
Glasses cleaning cloth to clean it up first, I'd say.
I've had some disks with scratches and the like work fine after cleaning
Hell, I took a hobby knife and made four huge, deep scores on a disk once, to see if it'd still work.
Turns out, if you do inside to outside, it'll still work. It's the ones that go around with it that give problems.
solar ridgeBOT
AdamMcCombs#8090
runic elbow
Turns out the gamepad charger is also down. So I guess no Pkmin 3 regardless of how well I clean the disc.
Should have gotten Pikmin 2 for the Wii when that was still a thing sold at walmart.
runic elbow
How can I fix VGA on a computer not displaying anything? I wanted to install Dolphine on my PC to play Pikmin, but it won't show anything.
It just randomly started to not display anything.
I tried asking Google, but it was mostly just "Delete System32"
proven olive
@runic elbow What do you mean, not displaying anything? IE, the computer itself doesn't show on that monitor at all?
Are you running a multi-monitor setup?
runic elbow
The monitor says "No input signal." This is a single monitor set up.
proven olive
So, you start Dolphine and it does that? Or does the PC just display that all the time now?
runic elbow
It does this on boot up. I heard about Dolphine, and went to turn on my PC so I could install it. It just says there Isn't any input. I press he power button, no signal.
proven olive
OK.
My first guess is to check the connections of the cable, both at the monitor and at the computer.
If it's been loosened, you'll get no input.
runic elbow
Both are connected. And srewed in.
proven olive
Computer boots, right? Have you heard the boot beeps?
runic elbow
Let me check.
The disc drive flashed. And a few numbers on te faceplate turned on. No noises.
proven olive
OK.
Not all computers beep on startup anymore.
My next thought is that the video card might be loose
But I'm not an expert, so this is where I just start guessing.
runic elbow
There is no video card. It is the VGA port directly on the board.
proven olive
OK.
How old is the computer and monitor?
And... do you have a second monitor to try it on?
runic elbow
Te monitor, I'm not sure. But the mahine was made sometime after Windows Vista.
I tried a TV and a regular monitor.
proven olive
TV has VGA input?
proven olive
And still, no input from the computer?
runic elbow
Nope.
proven olive
Alright. Do you have a different VGA cable to test?
runic elbow
I tried two.
proven olive
OK. Hmm.
Sounds to me like there's an issue with the motherboard, but that's beyond my ability to remotely diagnose.
Do you have a video card you could put in the machine?
proven olive
It doesn't necessarily have to be a good one - If you can put one in and test it and it works, then you can go about acquiring something that's not terrible
Well, sad to say, but I really don't know. I suspect something's wrong with the motherboard's integrated graphics, but I can't be certain.
runic elbow
I might have another machine to try.
I might not be allwed, though.
I was correct.
proven olive
"Can I take apart your computer?" "What, are you crazy?"
runic elbow
It was more "You're not doing that right now"
We don't even use the machine I want to try.
My only option now is an old Windows XP machine.
With half a gig of RAM. And a 1.4 ggahertz CPU. So that one is off the table.
proven olive
I usually don't keep my computers on the table.
runic elbow
I guess no Pikmin for me. Until I get either a new graphcs card. Or a new PC.
I hope the Pi can emulate the Gameube. If not, then I officially give up.
I also give up with touch screen keyboards.
runic elbow
Awesome! Alrigt, time to grab some Pikmin roms! First, I nee to wait for Raspbian to boot.
And to smash the toch screen keyboard to pieces.
proven olive
I found it easier to just grab a new SD card and the RetroPi pre-setup image.
runic elbow
I need Raspban to get the roms. Because my PCs VGA port died.
proven olive
Right.
RetroPi makes the Pi appear on the network and you can just drop files into it from other devices.
But if you don't have a PC to work with that, it's not quite as convenient.
runic elbow
Nope.
Does the USB system on the Pi usually not work withUSB storage, or is either my Pi or my USB defective?
It detects it now, but I can't get the files.
Ok, now it works.
proven olive
I... haven't fiddled nearly as much with my Pis as I wish.
Even though I have a B, 2, 3, Zero, Zero 1.3, and Zero W
proven olive
touchscreen keyboards are just awful.
runic elbow
I am dangerously close to throwing my tablet across the room because of this keyboard.
Also, Raspbian apparently can't read Retropie folders.
proven olive
Strange
runic elbow
Either that or it's corrupt.
I can access the System Volume Information.
Bu not the roms.
Technology hates me today.
bold turtle
?whois ogredrew
solar ridgeBOT
ogredrew#6724
bold turtle
woohoo early adopter
runic elbow
Does Retropie have an update for Gameube emulation, or can most emulators already run Gamecube games?
I guess I'll find out when I put Pikmin on the USB.
thin canopy
?list commands
runic elbow
Nevermind. I fear the USB is corrupt.
I give up.
I want to play Pikmin, then the ROM USB corrupts, and my PC dies.
Perfect.
gloomy pilot
?whois Trent
solar ridgeBOT
Trent#3569
indigo jetty
?whois Brian L
solar ridgeBOT
Brian L#1211
elfin wave
that scrapes the discord api I assume? for "game" and all that
indigo jetty
I assume so
sonic forge
?whois roadfun
solar ridgeBOT
roadfun#4192
sonic forge
Couldn't resist
night crescent
?whois adafruit
solar ridgeBOT
adafruit#3230
indigo jetty
?showtimes
solar ridgeBOT
3D Hangouts - 11am ET Wednesdays
Show & Tell (YT only) - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Tony D - Evenings PST Fridays
indigo jetty
?whois adafruit
solar ridgeBOT
adafruit#3230
indigo jetty
Not sure what else works <@&327289013561982976>#3230
sonic forge
?commands
ancient rivet
sonic forge
If you do that ? Commands there will be a response out of band telling you the commands
Shows up in the left side bar with a big D
But disappears after you look at it
ancient rivet
?rps paper
fair summit
I tried talking to @solar ridge by DM so as not to clutter up a chat, but it did not answer.
indigo jetty
How rude
abstract violet
@fair summit I did the same but I guess it doesn't work that way?
solar ridgeBOT
tannewt#4653
stuck moth
heh
thin canopy
?status skynet
indigo jetty
The adafruit discord has been super busy the last couple of days
polar wraith
Yes it has. I woke up to a huge backlog of messages.
solar ridgeBOT
3D Hangouts - 8am Wednesdays
Show & Tell (YT only) - 4:30pm Wednesdays
Ask an Engineer - 5pm Wednesdays
Desk of Ladyada - Random hacker times
Desk of Tony D - Friday Evenings
stuck moth
?showtimes-gmt
solar ridgeBOT
3D Hangouts - 16:00 Wednesdays
Show & Tell (YT only) - 00:30 Thursdays
Ask an Engineer - 01:00 Thursdays
Desk of Ladyada - Random hacker times
Desk of Tony D - Early Saturday Mornings
indigo jetty
Was the gmt for me Scott ๐
stuck moth
yeah, did I get the times right?
polar wraith
Scott, here's a video to amuse you.... https://youtu.be/-5wpm-gesOY
dire viper
oooooh that is a known, awful, problem.
stuck moth
?
indigo jetty
stuck moth
ah right
stuck moth
its called something else during daylight savings