#live-broadcast-chat
1 messages ยท Page 111 of 1
โSquozen inโ -> Like squeezed, but more painful
To work with clocks, you might need a hand.
ICE EPROM emulator ๐
๐
DIGIKEY!
yay
I โค Digikey!
Really enjoyed Limor โPlaying it outโ
Phil has his own sun...
8PM? What's that in UTC?
I got to show n tell just in time for the end
Midnight @lavish patrol
Excellent. I won't miss it then. ๐
is there a live broadcast right now?
@thin crystal In about one minute.
It's Ada'clock, time for Ask an Engineer.
@here ASK AN ENGINEER - LIVE electronics video show! 8PM ET Wednesday night! 6/6/18 (video): https://youtu.be/YrgCi7Aa-DE & 10% off all items in stock code is noise expires 6/6/18 @ 11:59pm ET #askanengineer http://www.adafruit.com +Adafruit Industries
Multistreaming with https://restream.io/ Visit the Adafruit shop online - http://www.adafruit.com Join the Adafruit Discord http://adafru.it/discord --------...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
ah cool
Live on Twitch
In about no minutes. ๐
Rainbowfruit!

What happens when we get to z?
Greek alphabet next
@eager sapphire You beat me to it.
Aww, I wanted a UPS truck!
GMTA
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
ulisp should run on a CPX... I'll have to try that.
Simone now has a badass scar.
Simone?
I'm glad she's doing allright
Oh yes
Simone Giertz.
I'm not sure it qualifies as a scar quite yet
Cheese Louise?
shes ok? YAY
It will.
Had not seen an update for the past couple of days
"See this scar? You should see what I did to the robot that gave it to me!"
Show and Tell every Wed @ 7:30pm ET! To join, leave a comment on the Show and Tell announcement on Adafruit's G+ page, youโll be invited to share your project! http://plus.google.com/+adafruit
DIY electronics, open-source hardware - learn electronics
That woman is hilarious
Welcome to the huge scar club Simone
so, do we blame her useful robots on the tumor?
Thanks for that, Andy
That's from her Twitter feed.
"There's only one in the world... that works"
Anything like my prototypes, and there's a pile just off-screen that don't work
Adabot is lifting the roof! Make some NOISE!
im hoping she wasn't trying to point at her head
@river peak Ditto here.
Why is that poor car robot imitating my day at work today?
no kidding, replay the vid, we have all had a monday today
@slow flint Nah, she posted a video to Patreon the other day, and she was in really good shape. Coordinated, well-spoken, etc
Markdown... Polo.
If the next robot she builds actually works properly, we should worry.
Mark is Debbie Downer's brother
We will go...BACK....to the Future.
@clear matrix Marco?
im at work drinking a Daiquiri having my own drinking game with AAE, im done with today
Mmmm. Daiquiri.
@lavish patrol Polldown? Something like that.
adafruit is live at https://www.twitch.tv/adafruit
Ahahaha, that's the perfect comic
wow, haven't seen Nancy in decades
That comic eerily speaks to me.
@clear matrix You lost me...
Marco Pullodown Resistor?
@lavish patrol It all started as a reference to markdown.
@clear matrix I think you missed the joke
It's late.
Or maybe I did
I think several of us missed the joke.
i guess i keep missing the availability with the crickit
Pump it up! Yeah! Make some NO...NO...NOISE!
Foam or bubbles?
Having a ball right now
Oh dear.
In Soviet Russia joike misses itself...
on a roll
Run little adabot. You can do it.
moonwalking adabot?
Wow
tanagra = darmok + jalad
๐
love the lights!
that is so cool!
This is awesome
Has anyone seen "The Orville"?
vyger?
Thumbs up on the font, too
how is paramount not slapping IP stuff at you guys. they are so touchy about it
@lavish patrol Oh yes, very good show
n for iNductor?
@waxen thistle Ep. 9 was straight out of Black Mirror.
10% off all items in stock code is noise expires 6/6/18 @ 11:59pm ET #askanengineer http://www.adafruit.com @open girder
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...

because comcast?
That voice is very familiar somehow

Noise: someone who doesn't know how to use their INSIDE VOICE when taking a phone call in the office. glare
Adabot is kind of a idiot.
Sorry, Ep.7
@eager sapphire I was thinking the same thing myself.
have you tried turning it off and on again
@earnest cipher adabot is the beginner kid-like entity
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
+10 for IT Crowd ref, @slow flint
we are now noise free. in a factory. ๐
Sounds like the voice of Mrs. Beakley in the DuckTales reboot.
Owls aren't all that smart, apparently.
Ugh. Internet died. Right after the "Something is interfering with the WiFi!" Line
bows pens and screwdrivers fall out of shirt pocket protector
Adabot's not the brightes LED in the parts bin....
Silly but instructional for newbies.
What could o stand for? Oscilloscope? Open Source?
sdw kinda like an old neon bulb?
That's very zen.
Watching the live feed and running this screen on a new Tinker Board 2GB.
Ah
๐ฅ
The Noise!
p is for PUT? Q is for losses?
My ears!
They Burn!
Is that noise the subway going by?
@drifting parrot It's the air conditioning, I think
I think it's the oven.
air compressors, we're in a factory and all that
I see.
What are the compressors on?
I mean, where else are you going to get your nitrogen? ๐
they are for the selective solder machine
Ah
air pressure for the PnPs, selective solder, stenciler, etc, etc
That blows.
nitrogen generator
So Cool!
OK, the SAM/SAMD version of ulisp runs fine on the CPX. I should write some libs for the onboard hardware
just got a call from new york, i was thinking it was someone from ADAfruit giving me a job, NOOOOO it was a telemarketer
Now THIS is a tedious job
That solder fountain is almost as cool as a chocolate fountain.
๐
@lavish patrol I don't recommend eating it
what kind of pneumatic pump is that?
i needed one of those last night
I could use it for some hand soldering SMT components
Black sun!
Place by hand? ๐ฏ
make maurah. i want 1-5
the black hole in the sky
@lavish patrol Hand-soldering SMT stuff isn't that bad
agreed Andon, its kinda fun.
But they have a pick and place.
@lavish patrol I'm pretty sure it's for the "Default closed" jumpers they have
thats what github said...
on a handful of boards.
i have 2 cats, its more like pick, place, swipe off
If that was a black hole, does that make the camera Maximilian?
ohhhhhh github burn
@slow flint LOL.
@lavish patrol Manual for the chunky through hole stuff
yeah, with that question, is ADA going to leave its stuff on there, or start self hosting
we have offers and all that to sell adafruit, we'll continue to keep doing this as long as we can (buying stuff from us helps keep us loan, VC free, and not selling the co' yet)
code is: NOISE http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
I have some friends that make paper shadowboxes with such cutting machines
should i save that question for the Q/A portion
@odd stream Right. Got it.
for now, github
Frabics?
so far it's working it
@river peak Do they have any how-tos or online examples of their work?
the stories of other people getting their code kanged and dumped into closed source is what im worried about
@waxen thistle https://twitter.com/ThePaperPony/status/982681529645137921
That's... not even their most complex thing.
That looks amazing
glitter, NOOOOOOOOOO we are all infected now
Look, there is NOTHING in the Geneva Convention that excludes the use of glitter.
there is , in section 78a
@slow flint You have been assimilated.
And @waxen thistle They've also held some beginner shadowbox classes at some of the conventions they've gone to.
Aglitterated?
i told my staff, if anyone gets out of line, flick some glitter on them
want a printer NOW, ive had so many projects id use it for.
That's what puts me off: 7hrs 27min. ๐ถ
welp, i need to change my drinking game to something not possible to finish so fast ๐
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
New nEw NEWs From Adafruit https://www.adafruit.com/newsletter
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Plug it in, plug it in.
JST PH 2-Pin Cable โ Male Header 200mm https://www.adafruit.com/product/3814
JST cables. WOOT!
RJ45 jack looks angry
just about 2 weeks late on the cable. ๐ฆ got some already, you know you have made it when amazon reviews say "adafruit" compatible.
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp https://www.adafruit.com/product/3785
oh nice.
That is nice
What a good idea.
Small PCB Test Points (100 pack) - Black https://www.adafruit.com/product/3823
Small PCB Test Points (100 pack) - White https://www.adafruit.com/product/3824
Small PCB Test Points (100 pack) - Red https://www.adafruit.com/product/3825
Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connectionsย when you have an assortment of components ...
Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connectionsย when you have an assortment of components ...
I think @rare shore was asking for just these the other day
Are the contents of Adabox secret before they issue? I can't find any contents info. Maybe I am just missing is somewhere.
Moar colors!
those look SOOOO much easier than what i had to make the other day... in cart,,,
But Pomono are awesome little grabbers
Test (point) the rainbow
circuit board cotter pins
AdaBot LunchBox https://www.adafruit.com/product/3437
Thatโs Philโs briefcase right there
get a big one!
It'd be cool turning up with you lunch packed in that.
No thermos ๐ฉ
Black Magic Probe with JTAG Cable and Serial Cable - V2.1 https://www.adafruit.com/product/3839
Black magic - you wave a chicken foot over it in Morse code to debug.
LOL. I didn't read that it's called Lunchbox. ๐
will there be a learning guide of sorts on how to use the probe?
@opal wolf i know huh
Does it come with chocolates?
3.2" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341 https://www.adafruit.com/product/1743
want that... added to cart
Have these gone through a good screening process?
@lavish patrol a mint, its waffer thin
@slow flint That's not enough! ๐
No SAMD51 support on the BlackMagic... I am sad.
@odd stream SAMD user base is quite small currently in the BMP community. Contributions to add more ID's and more flash upload stubs if necessary are very much welcome! ๐
Ok, I will admit...I've been distracted. How does the Black Magic compare to a SEGGER J-link?
it has the GDB server built in
i ws looking at this for access code keys, wonder if it can be stuck on top of other RFID's (cant stop adding to my door unlocker circuits
no need for a middle man software like oocd or similar , you can directly connect with gdb to the virtual serial port of the BMP instead of hunting for config files ๐
Do they work on a toothbrush charger? ๐
ooh
@muted dragon So it's upgradable, then?
For reference, the main communication of our community can be found on Gitter: https://gitter.im/blacksphere/blackmagic this is where most of the community support happens. If you want to look exactly which device is supported you can also look inside the codebase here: https://gitter.im/blacksphere/blackmagic
@muted dragon I really like the GDB only idea.
glitter.im? ๐
Yes definitely upgradible, you flash using the built in DFU bootloader.
@slow flint yeah we like to use all open source stuff if possible ๐
I'll have to read more about this @muted dragon
As I'm relatively new to using the Segger.
@open girder Arcada is a great name
Gamefruit?
How about Akedo?
options for DIY versions?
ArcAda
@waxen thistle I am here on discord, so either you ping me here if you have questions or ask in the gitter channel (https://gitter.im/blacksphere/blackmagic) ๐
Feather Crickit. Yes. Please. Thank you.
@muted dragon Thank you!
@clear matrix ๐
@muted dragon Being completely un-knowledgeable on J-link/etc, can the BlackMagic be used for burning bootloaders onto raw chips, or is that something it's not intended for?
all black magic probes are flashed including the bootloder with black magic probes. We also debug our own code with a black magic probe. So inception galore! ๐
Oh, I meant using it to program custom SAMD21 boards and the like
The Microbit model could be huge with schools.
So if the chip is supported that you have the answer is yes, you can flash it with the bmp fully, no special bootloaders needed.
the silkscreen color for the microbit version is awesome
@river peak Yes that is possible, that is what I meant to say in a roundabout way.
I'm wondering about using those nrf nails with a photocell to make a simple/cheap nrf detector.
Q: In the "Made in NYC" video, a pneumatic pump was used to apply solder paste on to the pads, What is it called? Would a solder stencil be necessary while using that pump?
Sponsorships?
Q : Can the i2c / SPI character LCD backpack be used with 3.3v microcontroller?
Or pull the LED and tack solder to those points...
@ashen hound its a selective solder machine and a stencil isn't needed but it does need to be programmed
@open girder I DO have a question for the 3.2" TFT screen - Are you planning on selling the screen by itself without any sort of breakout? I'd love to use it for a large version of my DigiBadges.
ah, I'm wrong ๐
yeah I was referring to the small one.. thanks @rapid hornet
Question: Did Q play any tricks on the USS Crickt NCC-1701-D?
And there are always mistakes...
@ashen hound ah, glad limor understood ๐
@proper trench good answer on debug
or to pull the "bugs" out of the vacuum tubes and coils
Wait. Crickits are bugs. So you don't want to debug crickits too well
Does the Augmented reality in Top Secret work with both ARKit (Apple) and ARCore (Android)?
LOL.
id call, but no thermos
The thermos always smelled like old milk anyway. Now you can put parts in it.
Brrrrrrrrrrring.
You're supposed to wash the thermos after you use it. ๐
Never mattered!
Wheely cool robot idea!
where will i store my never....er....antimater
So polite too!
yarp
Strange. I heard ringing on my end but not there.
Is there a discount code?
@drifting parrot you need to wait. the live stream lags behind
Then the answer was someone else. Strange.
ah, thats weird
Thanks and good night.
New York is pretty...backward I guess.
@open girder Thank you again for another wonderful evening of shows! Keep going Boldly Where No Crickit Has Gone Before!
is NY a state where you get fined for collecting rain water?
I waited until it was answer on the stream.
10% off all items in stock code is noise expires 6/6/18 @ 11:59pm ET #askanengineer http://www.adafruit.com @pearl portal
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Alright, going to go put this new power board in that TV
Sounds like a project. ๐
I've been handling a headache and distractions. So, I think I'm going to rewatch the twitch VOD from new products to the end, and then take another look at BlackMagic
....probably tomorrow at this rate.
testing 1 2
@haughty quiver response 3 4
Hio John!
@haughty quiver
John! Hey. The usual user/adafruit/live is pointing to tonightโs digikey event; you have a URL for your show, sir?
Good evening from Switzerland !
https://www.youtube.com/adafruit/live this work?
http://adafru.it/digikeydiscord For the month of June, hang out with Digi-Key in the Adafruit Discord server! Digi-Key, Adafruit, and the maker/pro-engineer...
(i think that's the right link w wrong info)
I just started broadcast, so it should go to that address
There you are!!
yay!
Just did a refresh and thereโs that JP smilinโ
adafruit is live at https://www.twitch.tv/adafruit
JOHN PARK'S WORKSHOP LIVE 6/7/18 Bumper Car Bot @adafruit @johnedgarpark #adafruit
Bumpinโ widda beeps yo.
Howdy!
Its workin for me John!!
Audio video workin' nicely
!
Audio and video is all good! Woooooo!!!!
@haughty quiver just take the camera apart, do a silicone conformal coating on the electronics and then you can submerge it no issues!
The conformal coating is like $13 for a good size bottle on amazon.
Howdy all you wonderful people!
Hi @waxen thistle
Yup. I recall that episode.
Looks almost like John filmed that PBS segment yesterday...
Self-healing cutting mats are found in the Deadpool or Wolverine aisles.
This would be very adaptable to a wall-hugging maze solving robot.
yeah, or turning right. Depends on your politics.
Feather + Crickit -- oh, the stackable featherwings. Data logging. Wifi. Bluetooth. Cellular even.
@haughty quiver We cant hear it
Really canโt hear the fan, John. Can certainly hear my own...
Can't hear it.
Have to crank up the volume to hear it
Glasses can lend a distinguished look.
Circa 1978. Intel 4004 processor, NiCad batteries. IR sensing "whiskers." Was a two-pass maze solver, 1) takes every turn, 2) calculates optimum solution. Wire tail was non-functional electrically-speaking.
1U dell servers -- excellent value (especially when you can get one used!)....but those tiny fans sound like a jet engine taking off.
I can still hear my fan
You may have misunderstood -- could not hear it before.
capacitive touch?
very nice!
Why is John building a robot that imitates my day at work, bouncing into walls endlessly?
We will all be replaced by robots eventually
Hilarious!
Did you remember to include the 3 laws of robotics?
Que ASPCA commercial/music
@haughty quiver Thanks again for another awesome show!
I had an idea of using the light sensor to have a robot follow a red, green or blue line
Super! Thanks!
Fun meter peaked on that one [...../] thanks @haughty quiver !!
Good show, John!
If you have seen the formula pi track, then you can see what I mean....
haha, I agree, I hadn't realized how fun it would be to throw a couple together :)
Awesome show, I can't wait I have TT moters coming Monday I can't wait to try it out.
I'll be jumping on some robot projects as well.
Your own cardboard battlebots!
Someone in the YT chat pointed out you could put a spinner on it
@eager sapphire I'll arm mine with a water gun.
yikes
flame thrower ๐
Or, a Bic Lighter
armed w a mini hot glue gun
One flamethrower - boom, game over
Im gonna use a 4s 100c lipo to make a spot welder and strap it to my bot, It'll fry ALL THE THINGS!!!!!
Flamethrower vs squirt gun
lighter fluid & a flame thrower
Evil laughs
new channel name?
#Cardbotics
Team: PaperTiger
here's the full episode if you want to try making a totally simple beetle bot: https://www.youtube.com/watch?v=5N3MGUrKb14
John Park builds some lively and inexpensive miniature robots. Starting with a simple vibrabot made from a scrub brush, John assembles a solar junkbot and a ...
that is wonderful!
Yes indeed!
http://adafru.it/digikeydiscord For the month of June, hang out with Digi-Key in the Adafruit Discord server! Digi-Key, Adafruit, and the maker/pro-engineer ...
@here ! LIVE! Meet Digi-Key https://youtu.be/RsEgosFQLA0 in #digi-key-discord
http://adafru.it/digikeydiscord For the month of June, hang out with Digi-Key in the Adafruit Discord server! Digi-Key, Adafruit, and the maker/pro-engineer ...
i felt to sleep during @haughty quiver workshop as it was long day
Usa big bad @shell mason
@ivory mauve i wasnt slept so much night before as after ask for engineer to needed wokeup time was 30min and 3h 30mins drive to one direction to event and after it back same so even 11pm show can fell you over
Phew!!! The E3 press conference I was watching ended just in time for Noe and Pedro's show!
woot!
76 looks sweet!
@here #3dhangouts Live in 2mins! https://www.youtube.com/adafruit/live #diy #electronics #help-with-3dprinting #papercraft
Glowing Slime Lunchbox โ Parts, Code, Files, Tutorial and more! https://learn.adafruit.com/glowing-slime-lunchbox/ Circuit Playground Express โ All-in-one b...
Signal cominโ thru!
@rocky reef Yeah it does look good!
Hoping to FINALLY get my lightsaber finished. Just cant get one of my special sound settings to work like I wanted it to
adafruit is live at https://www.twitch.tv/adafruit
Who remembers "Better Off Dead?" When I saw the title of the glowing slime lunchbox video, I thought of the scene where the mom's slimy dinner oozed off the plate.
OMG @hard hollow and @rocky reef I really needs those uv neopixels for a project that im stalling on!
coming soon!
Darn. Hopefully maybe next week
Today's coupon code SLIME gets you 10% off your order! #help-with-3dprinting
https://www.youtube.com/adafruit/live
Glowing Slime Lunchbox โ Parts, Code, Files, Tutorial and more! https://learn.adafruit.com/glowing-slime-lunchbox/ Circuit Playground Express โ All-in-one b...
thanks for hanging out folks!
https://youtu.be/Xzf4MY-ie0A
LIVE CHAT IS HERE - http://adafru.it/discord
https://plus.google.com/+adafruit
- Add +Adafruit Industries to your circles
- Post a message/comment HERE and say you want to show off a project and we will add you the โShow and Tellโ circle.
...
Hi, all.
Hey andy
Man, I don't know if I'm doing this hangout thing right
Almost time for the Wed shows! Wed is the best day of the week: Adafruit streams, then The Expanse.
@worn summit you need help?
I'm back from the dentist. No drilling was required. ๐ฌ
I have a project I want to share, but I have google + practically blocked on my system. I'm trying to set things up now
@odd stream Da Expanse, ke?
I can just give you the hangouts link as well
An extraction was made from my credit card, however. ๐ณ
I made a post That might work. Not sure how the webcam thing works, but that's all set up and functions though OBS
<--- Joshua Walker
@worn summit I would recommend just exporting webcam info directly. If you insist on OBS or SLOBS make sure the virtual webcam exports in the proper direction
No, it's just I don't know what google plus even is. I have a G+ account that I've never used
most of my G+ is tied in with hundreds of ingress people. dont use it much
I need to set up Hangouts one of these days
halkun it runs in a hangouts window
i make my apple friends use hangouts
Show and Tell is on!
Good evening all you wonderful people!
Oh! that's blocked on my system
Good evening @waxen thistle
@here SHOW AND TELL is LIVE NOW #show-and-tell - https://youtu.be/Xzf4MY-ie0A
Ooooh, shiny
He wandered into a Goodwill and found a Nomad.
Giant? That's a, ah, "giant" understatement
6 AA batteries that last 15 minutes of runtime...
A truly shocking amount of power
sounds like a lipo mod is in order
10% off all items in stock code is TRASHPANDA expires 6/13/18 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
....they have a stargate behind them. Jaffa Kree!
backlight mods can help battery life too
what is chipboard?
So, a LEGO-compatible circuitry system... could be called Ada-Blox? And they'd come in an Ada-box?
Oh dear god...
@earnest cipher It's a board wher you put your chips. ๐
I think chipboard is similar to cereal box cardboard
but thicker
@haughty quiver is particularly driven today
is it laser safe?
if you dont mind small fires, sure?
Yay! I got online!
I think chipboard is also known as particle board.
Cool
I hope he's not spinning his wheels.
im moving from chipboard to plexi.
@worn summit what is your username
halkun
Man, my internet is just poor today
@haughty quiver - new show time tomorrow?
same show time, oops, i said it wrong!
Roger roger
4pm EASTERN (1pm Pacific)
unless it's my name then it's Joshua Walker
I'm actually not sure what my username is ๐
Yeah its your name
2pm mountain
that's a great build!
@trim mountain I've used these TRRS jacks, and had no problems soldering to the tabs: https://www.digikey.com/short/j9p7jf
the slide switch is not waterproof
everytime i see one of those, i think of dj mixers... ๐
This is so adorable I think I'm getting diabetes
Cool stuff @vernal mulch
if the joint is tight enough, glue just gets in the way.
What happens if we run out of time?
To glue or not to glue, that is the adhesive question.
@waxen thistle It's a sticky situation...
@lavish patrol Same thing if we feed a mogwai after midnight....
A blender rendering? Would that be a blendering?
If we go over time, a discord rule gets applied which forces everyone to write in Iambic Pentameter.
deal
@worn summit looks very cool!
we are really overtime
Indeed, a very useful project
boom
we actually have time though. 7 minutes to AAE
but they need to get ready
DARPA may call... ๐
@worn summit I can recommend VooDoo (http://www.voodoomfg.com) for getting things printed.
The US Marines might be reaching out to you at this rate ๐
@radiant ridge At this rate, you'll be able to call in laser-guided airsoft missiles
@radiant ridge you need to add live target marking on a hololens
He's got a good voice for radio.
overlay on vision
PUT IT ON A DRONE!
I tried outlining humans with target boxes but the pi zero w can't do it in under 3 minutes per frame
"I'm sorry, Dave. I'm afraid I can't do that."
or like a really small moon -- 4" in diameter or so
Photobomb
Random child in background.
Smirking child.
I'mma use that moon/rock expression
@fallow fractal That's no moon.
oh so you want to make this about moons? j/k
We don't need a full moon.
Not all it's cracked up to be
Ends up being the butt of a few jokes.
Let's not go down that rabbit hole....
eww.
There's no dark side of the moon reallly. As a matter of fact, it's all dark.
thanks everyone for sharing!!!
different URL for the next show. just http://youtube.com/adafruit/live or similar
Multistreaming with https://restream.io/ Visit the Adafruit shop online - http://www.adafruit.com Join the Adafruit Discord http://adafru.it/discord ------...
Thanks!
Wow, I', aweful at names.. I didn't write it down... For my badge I send it attention to who again?
@worn summit Phil
@worn summit phil, or PT
@here 10% off all items in stock code is TRASHPANDA expires 6/13/18 @ 11:59pm ET #askanengineer https://youtu.be/yQ6ln3yM_1I & http://www.adafruit.com
Multistreaming with https://restream.io/ Visit the Adafruit shop online - http://www.adafruit.com Join the Adafruit Discord http://adafru.it/discord --------...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
It's Ada'clock, time for Ask an Engineer.
nice pun
YES!
ths is great!
๐ฎ
cowbell
Alright, it's got all the bells, now it needs whistles
smoke machine
@fallow fractal I was a little concerned at first until I noticed it was intentional
LOL. Layada trying to work in the background.
I mean, who else is going to extract nitrogen from the atmosphere?
"Every engineering thing you've ever wanted" - Well, honestly, the only thing I want for my engineering is more funding. ALL THE MONEY.
And more time. I need a TARDIS.
just as long as yoiu don't interfere with your won timeline
@river peak it's the age old question: would you rather be Bruce Wayne or Tony Stark? ๐ฆ 
aww, Dyno doesn't like my joke.
@muted mesa Tony Stark. Marvel universe has more interesting people to me.
agreed. but i'm a night person, sooooo...darkness.
10% off all items in stock code is TRASHPANDA expires 6/13/18 @ 11:59pm ET
Scott is a nomad in the wild unexplored realm of python on handhelds.
could use that to send morse code too.
Hey! so I want to learn how to design circuitboards [ie. powerboost] is there an online class you'd recommend or books? to go from beginner to intermediate/advance.
No they said it!
Adafruit Battle Royale
adafruit is live at https://www.twitch.tv/adafruit
@remote tusk questions get answered at the end of the show, so keep it handy and post it up then.
sparkles
ok thx! @muted mesa
yw! (i am interested in the answer...) ๐
Hi y'all!
@remote tusk contextual electronics on youtube has kicad tutorials
๐ @velvet beacon
Hi @velvet beacon
hey hey @velvet beacon
Jupiter 6 ๐
At this point, it's not "Tech-no" it's "Tech-Yes"
cowbells in the adafruit store /not
Show and Tell every Wed @ 7:30pm ET! To join, leave a comment on the Show and Tell announcement on Adafruit's G+ page, youโll be invited to
share your project! http://plus.google.com/+adafruit
DIY electronics, open-source hardware - learn electronics
the Jupiter-6 has next to nothing in common with the Jupiter-8
Well I was planning on making it to show and tell/ask an engineer but I got a remote support call at the last second... Next week hopefully.
That's the MacArthur Bot (IT Shall Return)
The Jupiter-6 does have the distinction of being the very first MIDI-eqiupiied synthesier
A man of few words
MAX4466
I have been doing some fun stuff with the scope recently though...
wow
that looks like a koala bug. i think.
Does it come in peace?
it doesn't exist, that i know of
@haughty quiver used that camera one the other day and it was really cool
(it's digital capture on a NuBus power Mac btw.)
Young Phil
@fallow fractal For all mankind.
MakeCode keeps amazing me.
I love the idea of having the thing you're working on focused on a camera behind it so you can see how it works.
they really are doing an amazing job with it. kudos @grim token
what if you put the camera on the inside of the mirror, facing further in?

@fallow fractal Mirrorception.
one board to rule them all ..
...and in the darkness bind them.
wow. they really want others to use makecode! /nice job
hackchat on the 22nd
you have to build a richard feynman bot so it can solve these problems for you (and play the Bongos)
I love the chibitronics stuff so much
sugru - mouldable glue
There's a group called 'Inventus' that meets every so often.
http://www.inventus.org
I cut my teeth on BASIC.
I first programed in BASIC on an Atari 800
same here (though only in middle school).
It was a beautiful day in the neighborhood
QuickBASIC, PowerBASIC, Visual BASIC...
I liked "Mr Robinson's Neighborhood"
1200 shows is like 52 years of 23-episodes a year
โWonโt You Be My Neighbor?โ Was such a beautifully done documentary
this is why hug reports are important!
awww.
100% agree @rapid hornet
I recently found this digging through old stuff. my first programming book...
10% off all items in stock code is TRASHPANDA expires 6/13/18 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
@muted mesa I loved VB. For designing the interface, nothing else came close.
that panel looks like Audacity (which works very well in Linux)
I did a bit of VBA programming for Excel.
@lavish patrol same. its the one language that i rarely need a reference for.
openshot video is the analog to audacity for film clip edits in Linux
https://www.openshot.org/
@muted mesa Sadly, they broke it in later versions.
There's also kdenlive: https://kdenlive.org
yes. VB4 was the last good version, imo.
dave 'great reelly' astels ;)
I do agree, @odd stream is pretty great.
and he has great reels. How symmetrical.
I heard he can shred cheese pretty well, too. So he's quite grate.
Just keepin' it reel.
Yeah I'm thinking about pneumatic stuff with forced air.
I worked in a factory production line that was all air powered.
Even solder machines have to brush their teeth
mmmm. slag. ๐
These things look, ah, fun to clean
What's all the black stuff?
I bet gold melts.
that is all oxidized slag
Yikes.
it has to be skimmed off all the time. THey probably use a nitrogen gas manifold
but it still needs a lot of tlc
that's funny the plastic bagging segment
Autobagginโ
Is the bagger machine named Bilbo?
(alternate ending for 2001 a space odyssey)
Or, perhaps, Frodo?
my selective solder machine lost a flux hose once. THAT was fun
Well, you can tell those boards aren't the Spanish Inquisition. Because Nobody inspects the Spanish Inquisition!
๐ @gaunt plume
@river peak lol. youre having too much fun tonight
"Slime lunchbox" makes me thing of that dinner scene in Better Off Dead.
I need to be drinking that same blend of coffee.
shout out and hug report to @velvet beacon the @open girder CFO
@opal wolf lol now Iโm thinking of it. Classic movie!
Link is in the description? But what about Zelda?
it's makes what we do here possible
Nice.
....looking for the hug emoticon.....
@open girder So you're saying that she does a @velvet beacon job?
:\hugging:
@eager sapphire It's there.
๐ always fun hanging out here in discord with yโall
@velvet beacon That's why we're here. ๐
21 more spots!
"calling Adabox! calling Adabox!" - Commissioner Gordon
Hugs all around ๐
๐
"I think I need a bigger box!"
NeW nEw NEW!
@waxen thistle Du-dum. Du-dum. Du-dum. Du-dum. ...
Adabox https://www.adabox.com/
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Edmund Scientific Grab Bag -- remember those?
5" eTape Liquid Level Sensor with Plastic Casing https://www.adafruit.com/product/3828
5" eTape Liquid Level Sensor + extras https://www.adafruit.com/product/3827
Thisย eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces ...
Q: is the fluid level sensor material food safe?
what is the resolution of the etape?
Onion Omega2+ Maker Kit https://www.adafruit.com/product/3808
Onion Omega2+ Starter Kit https://www.adafruit.com/product/3807
Ever wanted your own Linux-based IoT computer? A small one, that can be battery powered? The Onion Omega2 is sort of in-between a microcontroller (like an Arduino/CircuitPython/MakeCode ...
Itโs analog, so, resolution depends on your analog input ADC
The Onion is quite a-peeling...
ut oh a shiny thing
It has many layers
Hopefully it doesn't lead to crying.
You guys are so punny
ug, i wish makecode output to python or c++
@ashen hound the datasheet doesn't mention an NSF rating. http://www.milonetech.com may have more information.
@frozen parrot from the datasheet: Resolution: < 0.01โ(0.25 mm)
http://www.original.milonetech.com/uploads/Standard_eTape_Datasheet.pdf
That Onion's PCB board has many layers.
Keep forgetting to brace myself for the bad puns!
yeah I was looking at the datasheet and it did not mention anything about food safety
@slow flint Check out EduBlocks: https://edublocks.org/
@eager sapphire Your forgetfulness will be severly pun-ished.
Ouch
The noise bit? A sound idea!
Pimoroni noise:bit for micro:bit https://www.adafruit.com/product/3829
Can you make it go "New new new new"?
Pimoroni scroll:bit for micro:bit https://www.adafruit.com/product/3832
The BBC micro:bit comes with 25 red LEDs on the front but...maybe you have a fever, and the only prescription is MORE LEDs!? If so, then you can add 119 individual blinkies to your micro:bit ...
I had to do some jury rigging to connect my microbit to a speaker.
@ashen hound the website doesn't have any additional information. you could email them. but, NSF cert isn't cheap i imagine, so if they had it they would most likely mention it where they can.
2.1 is our crickit jack dimension
Does the scroll:bit cast spells?
Cool. Etape = rain gauge.
Banana plugs will fit in the microbit i/o holes.
i got mine today!!! :feather: 
@muted mesa thanks
There is a speech class in micropython so it could kinda sing the new new new song.
My Feather Crickit will be here tomorrow!
@open girder a 'feather' emoji s'il vous plait
every time i check, CPcrikit is not in stock... le'sigh
A green feather? I guess that's an M4
I have forth running on ItsyBitsy M4. ;)
that chip is def bigger than the M0...
Is there an itsy bitsy cricket planned?
Adafruit ItsyBitsy M4 Express featuring ATSAMD51 https://www.adafruit.com/product/3800
What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M4 Express featuring the Microchip ATSAMD51! Small, powerful, with a ultra fast ATSAMD51 Cortex ...
Wow
It is very very small
Cricketsy-bitsy?
Just wow
Adafruit CRICKIT FeatherWing for any Feather https://www.adafruit.com/product/3343
what is the tolerance of the .1 microfarad capacitor on the timesquare watch kit?
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch https://www.adafruit.com/product/3788
This is what robots use at a robot rave
does it need a heatsink?
Adafruit ItsyBitsy M4 Express featuring ATSAMD51 https://www.adafruit.com/product/3800
What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M4 Express featuring the Microchip ATSAMD51! Small, powerful, with a ultra fast ATSAMD51 Cortex ...
No heatsink on the M4.
That's all the new products for the week?
@waxen thistle There'll be more along next week... ๐
My current CP3 on M4 project is currently at 400 LOC with over 64K free
(that 400 doesn't count libs)
itsy has dotstar and a D13 LED
@muted mesa the manufacturer claims that it is rated for food safe applications
The chemical eTapeยฎ liquid level sensor is equipped with a Teflon (FEP) jacket and is rated for used in chemical, petroleum, and food-safe applications.
Hey! I want to learn how to design circuitboards [ie. powerboost] is there an online class you'd recommend or books? to go from beginner to intermediate/advance. I know basic college math and physics if that helps.
do i ask a question here?
ahhh, i almost looked at the chemical version.
More than one Crickit is an Orchestra.
need a leeks logo segment
crickit hat == cHAT
Fritzing has assimilated many into our collective
thx!
Fritzing puts out.
Could you add mp3 support to circuit python and is circuit python based off of pythons c code
TinkerCAD circuits
@remote tusk My personal design is done with PCBWeb, but it doesn't have a lot of the features of KiCad or Eagle
Does Adafruit have plans to use biodegradable packaging?
Hehe, people can pitch in on MP3.
Sound off folks!
Simon Monk did a book on Fritzing that's good.
Build a line drawing robot first
makecode forum on adafruit.com
ooh itsybitsym4 on the offering
I would jump on that if I were you.
Hungry hungry show.
Thanks and good night!
why is it trashpanda?
thanks @open girder & co!!
@open girder Thanks again for another wonderful evening of shows! You folks are awesome!
Another great show. ๐
Great shows today, all 3 shows!

Night yโall! Thanks!
I don't parse 'moment of zener'. Andon?
@fallow fractal It's a zener diode.
@normal plover trashpanda comes from an early crickit project that had a panda cutout from an amazon box
Right, but he never forgets to include it. @river peak
Itโs a twist on โMoment of Zenโ
@rapid hornet Also from the raccoon that climbed a skyscraper, too
Night all!
Must be a teevee reference. Haven't watched (broadcast on the air) teevee in quite a while, and haven't had cable teevee in a decade.
Mission Impossible: Trash Panda Protocol
Itโs a TV reference yes, canโt remember which talk show that was
@waxen thistle Iโd watch it
You have saved yourself much time, @fallow fractal
The Daily Show, i think
Next time I go to the VA and have to watch teevee in the waiting room I'll ask around. ;)
+5 points to @muted mesa
yay! + points! ๐
I rec'd crickit and then like what 10 days later -- itsybitsym4. it's a lot in one short interval.
(where's the teevee show on that haha)
Fun show. I'm especially intrigued by that Onion.
That Onion was a shiny thing.
Nice niche I think.
thanks folks, we're out, time to dig through the trash and make something
Have fun & thanks
get some rest adafruit you work so hard
I'm resisting... I want to see how far/hard I can push the M4 first.
(They never sleep)
๐ผ
@open girder enjoy!
(I am sure of this now)
Night all.
When you're 50 Dunkin Donuts starts giving you a senior discount.
check
@haughty quiver mark
Good evening from Switzerland !
๐
Ready to watch ๐
We be thumpinโ now.
yeah music !
adafruit is live at https://www.twitch.tv/adafruit
JOHN PARK'S WORKSHOP LIVE 6/14/18 Animatronic Eyeball @adafruit @johnedgarpark #adafruit
I'd use that coupon on a Crikit Feather if they were available ๐
120
120Mhz
@haughty quiver I have a couple IB M4s. Haven't done anything yet, but I'm queuing up a project for it.
what's the advantage of an Itsy Bitsy over a Feather ?
@haughty quiver You'd need to be able to change the address on subsequent Crickits
or use an I2C mux
more Crickits = more Rube Goldberg
@haughty quiver IMO it's size. Between Trinket & Feather.
.... and battery management
@haughty quiver thanks !
You can use the LiPo charger backpack if you need that.
Thanks guys ! I'll keep that in mind for futur projects
@young adder Of course the ItsyBitsy M0 and M4 are "express" boards, i.e. external flash so bigger file system (great for python libs, audio files, etc)
FYI- looks like the Crickit doesn't have adjustable I2C addressing, so the multiplexer will need to be used. Thnx @odd stream !
@inner spade Maybe in the Seesaw firmware
@young adder Compressed air cans use Freon (or at least used to)... holding it upside down puts the liquid at the bottom, so the liquid comes out instead of just air. Giving you a "liquid nitrogen" effect. ๐
@odd stream Yup, but would prefer a more turn-key approach if possible.
@autumn pagoda ho, nice ^^
@inner spade Sometimes custom firmware builds IS turnkey. Didn't have to build the hardware ๐
@odd stream I'm a hardware-centric person...
@inner spade I'm really enjoying having a foot in each camp.
Yup, it is more fun, indeed. Just need to keep tuning my software skills.
That's awesome ๐ Freaky, but awesome !
The original SeeSaw breakout has an odd path to upgrade the firmware (I had to do it to get PWMFreq working).
I believe I've already compiled and/or updated the Crickit firmware at least once. ISTR building from source.
Either that or I resorted to a standard .UF2 download to reenable its factory firmware (I run a forth on Crickit).
I've experimented with smoothed x-y servo control in CircuitPython: https://github.com/CedarGroveStudios/Galvanometer/blob/master/2018-04-23 servo inertia test v12.py
Hi JP! I just saw this yesterday from LOOK MUM NO COMPUTER and thought of you and this topic https://www.youtube.com/watch?v=mDe6q6RMUtY Animatronics + modular synths!
How to build an animatronic robotic face? for a modular synth? ofcourse......... The backing song is now available on my patreon :- https://www.patreon.com/l...
with camera inside teh animatronix eye would be great
camera inside animatronic eyes so you get what eyes see and with animatronic way to make it like human eye think mocap and animatronic figure move
the twitch need discord link/panel
Great idea
Oh hey I found Chat. It would be helpful to post a link in the twitch description
It's a tangle.
Great show once again ! Thanks @haughty quiver !
there is adafruit discord image so if the panel have link so people click it
great show the 10mins i watched
Great art/craft/mechanics/electronics session today. Thanks!
Indeed, another fun/clever show thanks @haughty quiver
thank you @eager sapphire
Keep those icons coming!
@cinder wind that's so great and disturbing
Thanks for coming out everyone -- gonna eat some late lunch now!
@haughty quiver shades of Blade Runner today. Not quite as organic. Perhaps the first step.
@here And weโre LIVE! https://youtu.be/E4WquVTScvw join us in #digi-key-discord
For the month of June, hang out with Digi-Key in the Adafruit Discord server! (http://adafru.it/digikeydiscord) Digi-Key, Adafruit, and the maker/pro-enginee...
dinner ready, just in time... ๐
evening Digi-Key!
what is digikey's discord?
Is Digikey running 24 hours/day? Is there a third shift?
Just head to here: #digi-key-discord
@muted mesa It wasn't the jack that I had trouble with. It was the plug. The center contact does not have a loop that you can put a wire through. It's just a little metal post. The two "R" and the sleeve has good connections but the tip doesn't.
@trim mountain ahhh! i misunderstood, then (obviously). ๐
@severe inlet we do have staff 24/7 including tech support, sales, etc
AI can be 24/7 watch and support the tech support and sales
@here #help-with-3dprinting Live https://www.youtube.com/adafruit/live in 5 mins!
Glowing LED Slime https://learn.adafruit.com/led-glowing-slime/overview Using MakeCode to make sounds https://makecode.adafruit.com/beta?webusb=1#editor htt...
adafruit is live at https://www.twitch.tv/adafruit
Today's coupon code LEDTHROW gets you 10% off your order! #help-with-3dprinting
https://www.youtube.com/adafruit/live
Glowing LED Slime https://learn.adafruit.com/led-glowing-slime/overview Using MakeCode to make sounds https://makecode.adafruit.com/beta?webusb=1#editor htt...
the slime of LED throw
thanks for hangout folks!
@rocky reef making LEGO boat what use
would be awesome
if the LED blocks what make a lighting to the LEGO boat that would be something
@rocky reef @hard hollow here is sample from lego boat and it miss some parts for sure but for reference https://instagram.com/p/BkQNuijA6W_/
Is it bad that I know exactly what pieces are missing?
Yes, I know it's over 90 minutes away - but I can't wait for Show & Tell ๐
who's ready?
Here we are again for more Adafruit Show and Tell goodness.
Or to put it another way - evening all. ๐
evenin andy
I'm ready.
THe trouble with always showering instead of taking a bath - no more bath toys.
Good evening all you wonderful people!

Evening @waxen thistle
...and the rest of you
Holy smokes what a burst of messages
@eager sapphire You're doing it wrong. ๐
I must be. Or this IPad is a bit behind the times.
banging my head against a CPE, not that wonderfull right now
evening everyone!!
Hi @open girder
Float-ing camera? No Int or Long cameras?
SHOW AND TELL is LIVE NOW #show-and-tell - https://youtu.be/2qV1FSugEt0
LIVE CHAT IS HERE! http://adafru.it/discord Visit the Adafruit shop online - http://www.adafruit.com https://plus.google.com/+adafruit 1) Add +Adafruit Indus...
windy drone cam
Arcadia?
Yeah, why not Arcadia?
capsella!
Celeste is playable here: https://www.lexaloffle.com/bbs/?tid=2145
mat arcadia is still rebuilding after the time war, thats why
my friend is a preschool teacher and we have a 55 gallon drum of technic pieces
Cloud-controlled airplane.
transformer bugs
has anyone waterproofed a circuit playground?
Insecticons.
dropped mine in a ziplock snackbag to check my bathwater temp, thats about as far as ive gone
might encase it in epoxy
reminds me, need to give my bricktronics shield a try, own one and havent even used it
yay @severe vigil !
how many sensors are you putting in it,
@severe vigil great job!
YAY
@severe vigil never too many questions!! well done!
Geordi-approved!
@severe vigil ๐
@severe vigil thank you for making that project
@severe vigil nice. what's the case?
@severe vigil Can you link the project here? ๐
limor and gotta run an adafruit so lots of projects we want to make, are made by ya'll, that's one of them ๐
worst case, go for the STOG version of the tricorder
@earnest cipher Be careful with that stuff. It offgasses chlorine when burnt.
Now the real question, can the CPX invert the shield polarity?
drop it from a building and you have people thinking the asteroids are falling.
No....breathes.....-I- am your casting. breathes
@waxen thistle I just got that. ๐
our neighbors almost called the cops on us because wouldn't you find 2 guys in Tyvek suits and respirators pouring things into a foundry suspicious?
Free Hugs T-Shirt to the MAX!!!
Adafruit IO-powered high five?
@earnest cipher make sure you have cat litter handy... you know, for the spills
yep
A while ago there was a Youtube channel where they stuck all sorts of things in a microwave. They had to do it outside because of the fumes.
Mitch is such a kind and friendly person, he was a joy to speak with at a previous HOPE conference.
๐ซ
If Adam was here, he'd quip up about his electron gun.
@pearl shoal if you can, please post those video URLs here
Yummy! A Crickit Pi!
bit crunchy
@waxen thistle are things all right at home?
call it the "crunchy frog" board
@pearl shoal ๐ more awesome work!
That dude = awesome
@pearl shoal awesome work! Tampa? hmm...7 hours if traffic isn't bad.
@eager sapphire Yep.
Just got home and settled. Boo missed S&T
Thanks folks! Here's some links:
Mike's Blog: http://www.lithiumcreations.com/about-the-author/
10% off all items in stock code is RIVETS expires 6/20/18 @ 11:59pm ET #askanengineer https://youtu.be/I1Llsna6lU4 & http://www.adafruit.com
Multistreaming with https://restream.io/ Visit the Adafruit shop online - http://www.adafruit.com Join the Adafruit Discord http://adafru.it/discord --------...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
This american life: https://www.youtube.com/watch?v=jJ_DVnPdUf0 episode on Mie
Mike Phillips, a 27-year-old suffering from spinal muscular atrophy, a disease which has eliminated his ability to move his limbs, has the same wish. He want...
Mike
@river peak We saved you a fresh slice of Crickit Pi ๐
MMmmmm!
Gun Pix
Video looks excellent on Twitch tonight.
Gun Holder
Riveting coupon code!
@pearl shoal That looks like a kickass servo.
On Saturday at 2, we'll post the live video on Facebook (sorry about FB, but it's where the support groups are) https://www.facebook.com/groups/ATMakers/
I'll edit it and post it to YouTube on Sunday ๐
Indeed, where did you find that servo @pearl shoal ?
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
...as long as it wonโt require an FB account..
@pearl shoal send me some blog-like text, link, etc and i'll post up before sat'
carrier pigeon with "lasers"?
Sure thing - here's the GitHub for the "Pi Wing" https://github.com/ATMakersOrg/ATMakers-Hardware
ATMakers-Hardware - PCB Design files and other hardware artifacts from ATMakers.org
Show and Tell every Wed @ 7:30pm ET! To join, leave a comment on the Show and Tell announcement on Adafruit's G+ page, youโll be invited to share your project! http://plus.google.com/+adafruit
DIY electronics, open-source hardware - learn electronics
@muted mesa Both youtube and twitch have been buffering randomly for me too.
adafruit is live at https://www.twitch.tv/adafruit
Do you need some kind of fitting to drive those w/a standard adafruit servo?
Or...just slips right on?
@winged sigil This is why I love these shows -- I never heard of Capsela before today, and now I absolutely want more ๐
dc motors. two wires.
Old plastic is more rugged than the modern stuff. I think it has something to do with the phthalates.
i'd never heard of capsela but all those parts are impressive
(Mechanical Q, not electrical)
Heya @split gazelle!