#live-broadcast-chat
1 messages · Page 82 of 1
Bye!
Thanks all - see ya next week!
Congrats @distant harbor
byeeeeeeeeeee!
@distant harbor CONGRATS!
whooo cya all next week
bbyyyee
@lofty prairie Lots of guides for using ESP8266 with Alexa/Google (think MQTT as best method)
thanks george G
New York is actually getting 70% of the eclipse
Byeeee!
Yay Mosfet!
byeee
good show
Night!
Awwww
Clear skies! 🌞 🌑 🌎 🔭
10% off all items in stock code is eclipse expires 8/16/17 @ 11:59pm ET #askanengineer http://www.adafruit.com
thanks!
'night, all
@lofty prairie Doing it with ESP32 will be same approach.
Ciao!
Bye!
ybe
And hopefully 0% clouds.
Why?
mmmbyeee!
how much mem does an assistant need?
Tempted to drive up to Casper for 100%, only 90% here in colorado
Thanks @strong spear & @harsh bone
@eager sapphire DO IT
No, it doesn't work like that, it's not going to be an Alexa Dot type unit.
If you want that, use a Pi.
Well, it would also be hard since you would need speakers and a microphone and you would need to set those up @lofty prairie
It's about a 5 hour drive, I think, it's been a while
This would allow to connect something (a light, a switch, a button, a sensor) to the IoT and having Alexa/Google Control it, or do something in response.
i know it can be done on pi, In guess bcause an assistant need some kind of opertive sys
Oh!
Yeah, I would use something like ifttt or Adafruit.io and use actions on google or ASK to connect to those services
ESP32/8266 arn't meant to replace Pi... different scale of things.
I’ve actually been working on projects like that
A Pi is a full computer... these are meant to be remote units...
Yeah, I’m actually working on doing a servo thing like that with alexa
For the time/money, get a Pi Zero W (or better a Pi3), if you want to make a dot clone
I just made a google assistant with a pi 2 connected through Ethernet and it works like a charm
Except, that you can’t play music, still working on that
sigh...i am well aware that assistants can run on PI-s everyone and their cat has a tutorial on that now adays
@round willow They did that on purpose, streaming is meant to be harder and they don't give that up cheap.
@lofty prairie Use the ESP32 as a MQTT device.
No. And likely never will. Let me repeat myself: these are not that sort of device.
"A Pi is a full computer... these are meant to be remote units..."
If you want a SOC (system on a chip), those exist... it's not the ESP series...
Hay i know im late but whats the phone # to call adafrut you tube chanel for the giva away
it's on the video, during call... ohm something something
(OHM) BIT-STAB
So i transfer it inta #s
yepp
Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. (which runs OpenWRT, a small linux system)
In some weird hybrid genesplicing with a 32u4....
I wonder how old you'd have to go in OSes before you'd get to something that could reasonably run on a (say) 32-bit Cortex M0 deal with 32 KB of RAM.
CP/M certainly could.
I guess Minix 1 would work too.
Anyway, @lofty prairie -- scruffynerf is right -- that way lies madness.
These chips don't have modern memory management, and eleventy three other problems. There are some nice small SoCs that do this just fine for not much money.
Honestly, PIZero is the usually the answer (not always... of course)
CP/M ??? Wait. Are you talking about Digital Research CP/M ??? As in Gary Kildalll ???
That's old stuff. I used it in the 70's.
and 80's until PC-DOS
still have PC-DOS 1.0 on 5.25 with manual
Hi all, I'm gearing up for a live stream on YouTube at about 1:30pm PST
💩
hi I'm live
Live streaming from John Park's workshop -- testing the linear actuator mount for prop effect reveal. ----------------------------------------- Visit the Ada...
thanks for posting the link!
Np Jp
Hello World! I was over in youtube
hi,,, trying to open that chat too
I'm in both chats, I think
Oh I'm missing all the actions
yes @nimble egret join us on youtube
Great show @haughty quiver , thanks
what we building
@haughty quiver High, good show, my linear actuator application is a rocket launch pad. Lying horizontal allows me to setup the rocket and its various systems. Then, flick the switch, and the pad will move to a vertical orientation for launching the rocket.
sounds pretty cool
But I was wondering if you made the end pieces yourself.
@glass crow yeah, it's fun to make stuff like that.
i had a crazy idea of making a box with a flip table and then placing a home made nerf gun turret on the flip table
like a hidden turret setup
hook that up to the home security system and mix in some strong led lights
and im fairly sure no one will dare to break in
@glass crow You need to read this book. Bigger, Bryce. Build Your Own Autonomous NERF Blaster: Programming Mayhem with Processing and Arduino (Electronics) . McGraw-Hill Education. Kindle Edition.
that book looks amazing
It's written very well.
I'm working on an autonomous project right now and there are many good ideas in this book.
Hi!
live 😄
Youtube live
live on youtube now http://www.youtube.com/adafruit/live
THIS CHAT IS @ http://adafru.it/discord (experimenting with having all the chats in one spot, discord) ----------------------------------------- Visit the A...
Fake news. We are not live :)
game of life
I want to see the gift store! 😉
That panel is pretty sweet
I don't understand why they couldn't just cut that Charlie panel... With big cutters
likely less fun and not worth the hassle..
Hi
Wonder if they recyle the reels...
adafruit is live at https://www.twitch.tv/adafruit
Trinket m0!
@harsh bone they prolly could, but fiberglass is fragile like that, so without the mousebite drills, it's highly likely that at least one would break badly
Why are the stencils so big? are there bigger pick and places out there?
Makes sense
Cart is loaded up and waiting for Trinket M0 to check out
@harsh bone and with their generally high yields, eating one to avoid the effort and possible injury and then use it for art is not exactly a huge cost to eat
Can get a pi 0 w
ooh nice
Plz
YouTube chat apparantly wants your attention
Lol
What's the advantage of the original?
Where do all the fumes go?.. Lead fumes filtered before going out to NYC?
Ok
What happened with your arcade cabinet you guys were building?
Can you show us how big it is inside the TARDIS?
Thers nobody there
@glossy glade it's 8:30 PM there I think... everybody else went home already
Oh
The Tardis goes on forever... that's the point
How do u know
@glossy glade because they're in NYC...
Bye
Ciao!
YEAH!!!!
hi and buy
Hi/Bye!
Hi
Ciao!
Bye
HI LADY ADA WE LUFF YOUZE!
Hi buy


bye!

Hai! Bai!









hi im new here
^ nice
hi
There
bye.
@lofty prairie Never let it be said I didn't correct myself when I discover I'm wrong: ESP32 Alexa Client: https://github.com/MrBuddyCasino/ESP32_Alexa
Alexa client on an ESP32, living inside a deadly little bunny.
...
@covert comet CP/M on ESP8266 : https://github.com/SmallRoomLabs/cpm8266
Hi!
The square sonic thing can save you with really good timing
Maybe in the next version of Mariokart they will have house cats
Belated ❤ for Limor (love the factory tours)
Please do
Want to see the boards being built again
too
Nice Phil evil laugh
Boi
Nintendo brings out Phil's darker side
I never had a Wii U but I really like the switch
So I take it there is something intrinsic to the Switch that makes it work over the interwebs, too?
It's got HDMI
but you can compete over the net with another player, yes
Its hard to find all the parts 4 the minty pi
Oh yeah that too. It just connects to the wifi and uses a Nintendo account to play with other people
Note that Phil sets a good example by wearing a helmet.
"expect" was one of those life-changing discoveries like "screen"
LadyAda should be safe though because she can just turn into a squid if things get inky
I just found the Ham Sunday videos, any chance you'll do more of those?
FYI: I'm giving @glossy glacier the play by play for y'all
Reason: because it's FUN.
How do you do the trick jumps?
I am streaming me watching a stream...
Eventually, you could be absorbed by the interwebs, Adam
You won't know if it's you, or a stream of you, after you shut off the puter
I think mentioning mushrooms to a TSA agent might hold you up at the airport for a bit...
.........seems to be a pause on the youtube switch stream
Wonder how Mosfet would react to a life-sized 3D print of himself
I'm watching your live stream; I'm learning to build tube amplifiers and curious about high voltage safety...
Just watching you while reading / learning
about AC
@fallow fractal : join us in the Marie Curie voice channel
hello! just joined
night
night folks
@tardy jacinth just catching up here myself
Is there some other stream going on other than Adams scope repair?
not anymore, I don't think?
Running a live broadcast in YouTube with the chat in discord makes it harder to participate in chat. I only have discord because a client of mine uses it. If it wasn't for that I wouldn't have discord at all and would then be shut out of the ability to participate in chats during live broadcasts from Adafruit.
Seriously Its quite hard to run Youtube and discord together on mobile devices !
Thus Had to move over Twitch but yet its not perfect
😞
@devout knoll have you used Twitch desktop app at first it wasnt live feature and now it have and runs nicely as you can have server in there as well
There is a relay, youtube/discord... @rapid hornet, did you get a chance to check it out yet?
@fallow fractal just got back from my sisters wedding today. a relay isn't a high priority for me but I did look into embedding youtube next to chat in a webpage
it wouldn't be simple but could be another option
@rapid hornet congrats to your sister!! 🌸🍾
thanks @blazing atlas !
thanks @devout knoll !
tonyd is live! https://www.twitch.tv/adafruit
CircuitPython: Analog Inputs & Outputs with Tony D! #programming #python #electronics
Is there a chat for this?
adafruit is live at https://www.twitch.tv/adafruit
CircuitPython: Analog Inputs & Outputs with Tony D! #programming #python #electronics
happy solar eclipse 2017 everyone! https://www.flickr.com/photos/adafruit/albums/72157685459429213
OMG
stream deck is like amazing
we'll make an open source one later
for now this is super duper good for streaming
i'll do a little video later
Seems like 'LCD key' is the crux of that, is there a good cheap (O)LED pushbutton? I see costs like $75+ each.
What I'd love to see at a reasonable price: https://www.geek.com/chips/e-ink-concept-gives-keyboards-different-buttons-and-layouts-on-the-fly-1537881/
hey @rocky reef @hard hollow @haughty quiver (and anyone else who streams)...
so that's most of it for now, you can do "folders" for the buttons so i am going to do a twitter folder
and a couple other things
works good $150 not bad
Actually, that seems like a pretty sweet price
Coming in 2017: https://sonderdesign.com/keyboard $200 E-ink keyboard
i use our circuitplayground as a keyboard too
😃
so i think this + that will optimize things even more
nope
just one big screen
and there are buttons on top
clever, keeps the costs down
easy to remake too
have you seen asus zephyrus laptop it touchpad design?
Ah, I was wondering how they got the price down, given the $75ish cost of oled buttons.
@shell mason this one? https://www.asus.com/us/Laptops/ROG-ZEPHYRUS-GX501/
ROG Zephyrus is a revolutionary gaming laptop born from ROG's persistent dedication to innovation. Despite being thinner than all previous ROG laptops, it has the hardware to rival high-end gaming desktops: NVIDIA® GeForce® GTX 1080 graphics, a 7th Generation Intel® Core™ processor, an optional 120Hz wide-view display, and Windows 10 Pro.
yeah it have cool way to get numpad to touchpad itself
I like the solar eclipse video!
@green pagoda thanks!
ok gonna stream tonight, limor has a cool project to share, likely in a couple hours, we'll make some noise here as we get set up
live show later will be ... Standalone CMSIS DAP programming library for Arduino
LIVE!
#deskofladyada Standalone CMSIS DAP programming library for @Arduino @discordapp #discord <@&327289013561982976> #adafruit https://www.youtube.com/adafruit/live & http://adafru.it/discord
Step up your game with a modern voice & text chat app. Crystal clear voice, multiple server and channel support, mobile apps, and more. Get your free server now!
THIS CHAT IS @ http://adafru.it/discord JOIN US THERE! (experimenting with having all the chats in one spot, discord) -----------------------------------...
intense music
How was the eclipse in NYC?
Heelloo
Hello!
hello!
Hi!
hey folks
adafruit is live at https://www.twitch.tv/adafruit
Standalone CMSIS DAP programming library for @Arduino @discordapp #discord @adafruit #adafruit
: D
pretty quick twitch bot
hi
hey
hi @fallow fractal
hey i was on the stream for a sec!
We are Adafruit famous!
Hi
hi @harsh bone
hi hi everyone!
Hi
we'll pop up the chat later and ya'll can ask questions
@harsh bone will you be at world maker faire any specific days?
such quiet keyboard, we never hear it on the stream
@rapid hornet ... Got a Discord note they are going to do Video
as i call him now post GoT
"Arduino as ISP"
@open girder your eclipse video led me to research water towers in NYC.. You don't see those everywhere.
Ha, "might were to sleep once in a while"
i might
@harsh bone kk, I'm trying to plan when I'll fly in and be there
lol
I'm gona be there Friday night.... Leaving late Saturday ... up to NH for another meeting 😉
k, I'll probably fly in thursday
maybe we'll do an adafruit discord channel during the event
seems like a good thing to do
huh, my text is red
that's odd
any way
Yes please!
ok @rapid hornet we'll do a discord meet up or somethin'
(red text)
i think i have so many devices plugged in...
yup, I'll host @open girder
huh not for me. maybe it's admins
cue all of us furiously typing to try turn red
😃
rip mac keyboard
or... i looked at the sun too much
sun burn..
probably looked too much
i can only see good things now, worth it
We got a good look at it in VA
CNN is just blank
we'll play a video at the end of today @ adafruit
Ad block for your eyes!
Yeah, not in UK I think @lament flume
I think I've seen that atardov guy... on the ESP32 github...
I remember seeing one when I was about 10
This... this is just SAMDuino-ception and I ❤ it
Well at least I haven't heard we are
(20 years ago)
I remember a partial one a few years back, was rlly disappointing
i'll show the set up at the end or something
it was ~97% here and it was still cool
hah, nice!
@rapid hornet I'm partially to blame for that
would love to think of more emojis
I like the rubber bands! 😉
@ogredrew#6724 sounds good to me
We did them for quite a few programming langs, hardware logos and stuff in a Slack team I run


Love that you build the tools that you need.
holy geeze that is fast
Teensy uses the weird HalfKay protocol. I am not a fan
How is this different than when like we flash an esp8266 to run micropython?
<@&327289013561982976> - very many thanks for sorting out CMSIS DAP for me.
like the next icon!
i think a lot of this broadcast is show scott we can soon make a ton of circuit python devices fast
😃
What would prevent you from building a programming MUX so you could load a bunch at once?
@open girder I'm at the plotting-and-scheming phase right now.
Just have to buffer the status returns and keep track of them
.. warp drive chip programming
@fickle umbra yah, email me

we'll work it out
No, I mean multiplexing it so you could load a bunch of the SAME devices at once in parallel
I'd be worried about one bad chip meaning you had to re-attempt the flash on the entire batch
the GEMMA demand is up there, but we want to get it in the hands of folks here first
You need one person who knows a little bit about everything to mesh it together. Rather than one person who knows nothing about anything.
Like a gang programmer... 50 @ once...
<@&327289013561982976> - When you're designing new boards are you adding additional storage for the larger size of CircuitPython?
@rapid hornet ya wanna answer that one?
the answer is yes, always, we will, eventually 😃
however
takes some time
I think we'll want enough space for it going forward on new boards
not everything new will have external spi flash though
OK, Theory time here: could you put CircuitPython on a stock feather M0 right now?
I think so... since I did it yesterday 😉
I'm waiting for a version that can use the SD card ("boot" on it ?) on the adalogger
OK, so, TIIINY amount of code-space, comparitively... but not necessarily a deal-breaker depending on what you're doing
@upper sandal one where there is no onboard filesystem?
Thanks <@&327289013561982976> and @rapid hornet
OMG STAR TREK CATS
ROFL
I would watch that
wth... i want that book
oh the internet.. what have you shown me...
@open girder : enjoyed the Star Trek soundtrack music.
how does this book exist
Gutenberg didnt imagine this when he was inventing the printing press 😃
The feather M0 Adalogger can run Circuit python....
@lament flume Gutenberg did not have sufficient imagination
Gene Roddenberry didn't imagine this when he invented Star Trek either
@green pagoda only because he didn't get pointed in that direction
to invent Star trek, and also figure out that the internet would love cats
(You can bet MBR would be giggling like whoa at the ENTIRE consept)
nice setup
thankyou for caring about the sound quality in your casts!
mosfet!
d'awwwww kitteh
"Trying to sleep here"
You had me at SAMD fast flashing. The Star Trek cat book put it over the top
What does the overlay on the GreenScreen?
@open girder What's in the glass, besides the rocks, of course?
hi
so CPX on arduino now?

@harsh bone Wirecast
Seems like this would make it easier to use it as a HID device. Like a Keyboard. Having to flash the tenesy twice to make it a HID is a pita
ok!
I think thats what they said @scarlet marsh
thanks ya'll!
see you!
night @open girder
needs to know what Phil drinks, for Science
peace

Nini @open girder, and, by proxy, @proper trench
Always thought those water towers weren't used anymore.
Obviously a good Irish whisky
turns out they are.
@rapid hornet THX
ah
@fickle umbra tonight is ... "CAOL ILA
SINGLE MALT WHISKY"
with black rocks that are cold in it
Ohhh, I approve Very Much, @open girder, and that's speaking as a Mc
That's what it's SUPPOSED to taste like
yup
I imagine every picture of PT he is holding 7 cameras.
yeah, thats my impression
the cameras.... are holding me!
lol
Camera man, with the power to ... camera?
😛
Phil is well on his way to being a camera cyborg
you need a camera exoskeleton!
I really should go to bed, but I really want to finish what I'm working on!
enjoy @open girder
Great stream guys! I started a late but still watched from the beginning. Lol, I liked the cat trak book.
live stream at 11pm ET! stay tuned
ill be asleep
to sleep or to consume youtube...
some things are worth the wait
good point
isn't "maker time" generally a ~30 minute variance?
you can press the up arrow and correct your message.
ok
I don't mind the wait. It forces me to be productive and unpack my dorm
@green pagoda the first thing you did was get your network connection up, right?
@ogredrew School does that for me. My mom wanted me to make my bed first but I got out my circuit playground plushies and was like "but circuits mom"
lol
circuit... playground... plushies?
so what's the live stream on?
Yeah, I have Ruby, Gus, Billie, and Mho. They are adorable and I use them when I go to elementary/middle schools to talk about electronics
.... /me makes note for birthday list
Take-apart Tuesday @elgatogaming @NintendoAmerica <@&327289013561982976> #adafruit @discordapp #discord
Also, whyfor no Sparky plush?
I would have at least one if it existed
Youtube
Set this to your home page: https://www.youtube.com/adafruit/live
THIS CHAT IS @ http://adafru.it/discord JOIN US THERE! (experimenting with having all the chats in one spot, discord) -----------------------------------...
AHA
Thanks, @vital bane
I was worried things were going and my internet was saying "no... just, no"
Well looks like I actually need to get out a computer
..
Phil Lives!
an hour late?
yes.
late for?
whatever...
ok, be chill here
or latte?
ok
all caps and being jerky will get a ban
ok
thankya
good things come to those who wait.
...
are those loading dots? 😉
yah 😃
😄
... Philware update running?

Hello loud music.... (my fault)
Take-apart Tuesday @elgatogaming @NintendoAmerica <@&327289013561982976> #adafruit @discordapp #discord http://www.youtube.com/adafruit/live
THIS CHAT IS @ http://adafru.it/discord JOIN US THERE! (experimenting with having all the chats in one spot, discord) -----------------------------------...
ok turning off CNN switching over to youtube...
oh my gosh yes its live
Hi!
OK, what's the origional webcam being used for, I gotta know?
i love the buttons
Open sourcing your production setup 😃
That's a neat thing!
Oh man, now I want one, @open girder !
That's really cool!
yeah this is really cool!
JohnPark: Mr. Schrodinger's cat?
takes a bit of fussing, but the powermate software got a whole lot better in the past couple of years
agreed
😪
great control for video edits etc
Why do I get the feeling that every bit of tech has to be bugeted as a double purchase around Chez Ada?
Why not a single screen, and a touch pad, rather than a fixed number of mechanical buttons+displays?
It'd be more flexible if it were ipad-like
Matambale: Where's the fun in that? 😉
tactile buttons are nice sometimes when you are splitting your attention
quick to develop etc
roger that about the actual buttons tho, but...
but...yanno?
@haughty quiver this was supposed to be yours but they got too interested as to whats on the inside 😉
hahah!
LOL @vital bane
i've got my cigar box switcher ; )
yup
Make sure your Tesla is shipped directly to you, @haughty quiver
samething might happen to my wife's pokemon go plus...
whoa
Oh, @haughty quiver, I'm.. kinda contemplating shrinking our project down just a bit
Pretty decent controller
(and by shrinking down, I mean gemma sized)
@fickle umbra coolness
(and by kinda contemplating, I mean I'm already working on code)
how big is the gemma
love it
I'm saving up for a Gemma 😃
what is a gemma
size of a quarter
o
great little board
what can it do
the Gemma M0 is CPX's little sister: she's cute, she's tiny, and she can still kick butt
lmao why would you need that
three digital IO pins
lmao
o
So mech buttons sitting directly on a regular touch panel
this is nice.
are the buttons capacitive or resistive ;O
yes, so great!
I think it was a resistive touch screen.
It can be used for other things too.
we have a few hundred wearable projects on learn
I'm rebuilding my iPad pinball controller using a Gemma
and there are maybe 100,000+ gemmas out there, hmmm - more than that, but that's a quick estimate
back to the keyboard emulation topic (it came up earlier) -- have you seen an open source way to do what the Logitech dongle keyboards do (2.4 GHz) but "roll your own" instead
Someone's finding uses for them then! 😉
thats a lot of gemma's!
Yes and now all our wearable projects can be CircuitPython enabled, which is great for quick fixes in the field
congrats on supporting that level of production, wow
Is the plural of Gemma Gemmae ?
@abstract narwhal huh, haven't seen that yet
plug into computer, shows up as a USB drive and the code is sitting right there!
GEMMAZ
this screen button thing is rad
That reminds me: I need to order a numeric keypad.
so actual mech buttons
is gemmaz said like the wassupppppppppp commercials?
you also wouldn't have to worry about calibration like this...
true, true
LOL @vital bane yesssss
wait,$150 is cheap?
could use this with a light mask? https://www.adafruit.com/product/333
@brave rune compared to the LCD keyboard, yes
@brave rune for something that does this, yes
hey folks
for video production hardware $150 is cheap
Could the overlay simply be a PCB, I wonder?
Hello oldcrow!
yah, lots of ways to do-redo this
That way only the clear buttons would be special.
looks to be pretty hi-reliability and fully configurable, so the $150 seems appropriate
and custom
#1 concern was the mech switch quality, looks decent
Hello Everyone!
but if you were to forgo the tactility of it, the price could drop WAY down
Hello
Ohh, I just had a thought.... hey @open girder, the ITO-coated sheets of PET you guys sell (1309), would that survive heat distortion.. like molding buttons into it?
anyone remember the Ergodex? I built some animation controllers with it a few years ago: http://ergodex.com/content12.php
just ship it to @haughty quiver like that, he can do a video putting it back together 😉
😃
I would guess that @haughty quiver could make a steam punk version
the hooks hold the screen module only not the bcp
heya @glossy glacier o/
Hai @glossy glacier (all late)
you should reach out to the company and interview the engineering team that made it
Meanwhile, @hard hollow and Pedro have modeled and 3D printed a replacement case.
Auf Deutsch
@haughty quiver You mean they haven't already? those slakers 😉
MUCH easier to take apart than to reassemble!
anyone eltse just watch LadyAda in the corner?
Gotta go everyone -- my son and I are about to play some Rocket League. Bye!
o/
See ya JP
JohnPark: Have fun!
60,000 unread?
Hexdump!
I might need to try and get myself one of these things...
lunch!
ye me 2
that hex editor should search for 16 bit chars with a settings change
does that say sw_update at the top??
No one is realizing they are streaming at 12:34 lol
00:34?
I would be amused if they built a new firmware image with everything and reflashed it when you reconfigured the device
Eastern time zone
this is my excuse for being up this late.
@open girder Could I get a copy of that file? (or a dummy one if you don't wanna share that one?)
I honestly wouldn't have guessed it was that late.
great stuff
@open girder Thanks Phil!
@open girder What time do you guys usually leave the office?
👋
goodnight! o/
Thanks for taking apart your thing!
Night! See you on show and tell tomorrow!
Thanks!
Thanks @open girder and @fallow fractal
thanks guys
they never leave, nor do they SLEEP!
cheers all
I may be able to get the scope online by then...
I have a scope but it's the other side of the room and... I can't get to it.
ha @eager sapphire I think i read somewhere they live at the office
naw
they must
Electron Microscope that is...
ah huh
we have an apartment, a tiny one
@open girder Thanks again, and have a good night!
oh
adafruit is a factory now
you sleep in a bit, right?
How's mosfet doing?
See, now I wonder if Mosfet misses the pick-n-place....
good, he was on camera last night
What was the probablity of getting a cat hair in a order?
could warm himself on it
LOL @glossy glacier
@leaden sphinx Hmmm...
g'night and thanks for another fun show pt & la
ahh. probably not good to live at the office ha
thanks ya'll!
good night!
Thanks! Night.
Thanks!
Now to decide if I want to stream...
Doggone it. I'm too late.
@glossy glacier Um, I need to know if it works...
good night!
NorthernPike: They opened it up and there were tiny people inside!
@fickle umbra I havent had a chance to work on it after the last stream...
@leaden sphinx Shhhh. Don't tell anyone.
@glossy glacier See, now I'm torn.. because on the one hand, sleep is a thing... but on the other hand, SEM!
Sleep is nothing but little slices of death.
I am not sure I even have everything out here to stream right now. This is the first time back in the shop today...
How morbid eh? Sorry
Or you can ask the question if you are really the same person every time you wake up...
I'll go away now.
Also, @leaden sphinx If you put a @ instead of : in front of peoples handels, it notifies them you are talking to them.
Depends on the time continuom at awakening.
And we hit many universes, that was fast...
Night!
Night
Understandable.
@open girder hey check that weird usb haptic thingie with win10 it could work as radial controller like Surface Dial
/ taps mic
@hard hollow mic tab is cool right


Hang out with Noe & Pedro Ruiz and discover 3D printing! Get your 3D news, projects, design tutorials and more each week on Google+ Hangouts On Air. Subscrib...
Hey!

Finally it's Wednesday and I don't have a meeting during your show!
Hello From Turkey
hello
hi hi
Good morning, dudes
@hard hollow There's a streamer mode in Discord that you might want to check out
may the @hard hollow and @rocky reef shine with thunder helm
You should make it so you can see through it
You can discount cargo 40 dollars for turkey this is very expensive
I think the cr-10 is 300 x 300 x 400
How often does a nozzle destroy your blue tape?
paid to have fun! that's the life!
How does blue tape compare to buildtak? Would you ever need to put blue tape on buildtak? Does blue tape do well with heated beds?
Someones at the door 😃
wow, that's what I call live streamin!
You should totally do mail opening videos
watching live show and samsung unpacked show
That phone stand looks really neat
now @rocky reef and @hard hollow are doing R2-D2 version of it
@shell mason ah super cool idea!
Printing spaghetti I see!
@fallow fractal printing brains
@rocky reef it can be similar than R2-D2 too as there was other R2 units what have similar desing but different coloring
thanks for watching folks!
Thanks for the show @hard hollow and @rocky reef!

\o/
I can stream 720p at 30fps
I can also live stream to YouTube
Verizon gave me a 4g hotspot so it's portable now
...
@open girder that's a pretty early loading screen, isn't it?

I love all the Adafruit emojis 😍
Need a black cat emoji
mosfet
Maybe a raspberry
high diddly ho makerinos
Hello all you wonderful people
Hi
Enjoy the show and tell guys, I'll catch up tomorrow!
Just was watching Battlestar Galactica. I'm pretty sure we're all Cylons 😃
@everyone SHOW AND TELL IS LIVE! https://www.youtube.com/watch?v=VR4SM0GG_DI
I don't heal quickly enough to be a cylon
Been forever since I could participae on S&T. Home sick today, so I can watch. No voice though...
Humblebundle has BSG content.
@viscid warren As much as I want to enjoy the BSG comics, they toy around with canon and continunity waaaaay too much
@waxen thistle good to know. Thanks.
Hello World!
Hai Scott! I Finished with the truck just in time!
this is super cool
yay @fickle umbra
@haughty quiver That chess project is an 11 out of 10 on the amazing scale 😃
Wow.
The chess board is actually something I've seen at an escape game. That's so cool!
justgivemethepromocodesoIcanorderthetrinket !
Yay trinkets!!!
Trinkets!
Yo
trinkets !
👌
Thanks!
for a second I thought he meant me, but I wondered how he knew my name 😃
yay @paper peak !
Funny that Tony D showed off an altimeter, my daughter showed off her rocket launcher last week and used a feather adalogger :)
Hugs for all!!!
Oh my god, I forgot it was the day for Show and Tell!
"give me a jetpack if you want to live" /terminator
I want to make a RoboSnake. And, of course, program it via CircuitPython
I am jealous of that view
@radiant ridge I love the cable as mic boom
Same
perfect
Jetpack? Is the username TheRocketeer taken? 😉
@upper sandal its TRINKETPARTY
A little scary looking...
So, once Discord rolls out group video calls, will Adafruit be changing services?
yup
That will be exciting
For something called "Discord" it certainly is pretty well organized.
Live demo worked!
great work @radiant ridge
yay @radiant ridge
yeah @radiant ridge that's pretty awesome
perhaps "accord" was already taken
@river peak they're sneaky that way
@radiant ridge You have pleased the demo gods
D'accord.
Lol
@haughty quiver It's all a feint.
Right now, I'm only disappointed they don't have a Raspberry Pi app
Does the web client work on the RPi?
Yeah, it does.
I get it... a desk calendar
😄 😄 😄
"desk" calendar.
lol
I'm not sure how fast, because I only tried it on the Pi Zero which is slow for web browsing ANYWAY
But I did find someone had put a thing in their official "Suggestion" thing: https://feedback.discordapp.com/forums/326712-discord-dream-land/suggestions/19356958-raspberry-pi-port
Would a computer project work for show and tell? 🤷
I'm still amazed at the sheer usablity of a $10-$35 computer
Needs a pin defintion with PULLUP
@waxen thistle totally.
my calendar is still on june
$5 and it's a crazy good game emulator.
its like those calendars with a new day each day, after about two weeks into the new yr i forget to keep changing it each day
yet I still will probably pay $150 for a scalped SNES Classic...
$35 and it's awesome up to N64
@waxen thistle I love Pis, buuuut I always end up building things with microcontrollers because a Pi is just Too Much
I watched myself wearing PiGlass on PiGlass
pinMode(2,INPUT_PULLUP)
I like micros too @river peak
@haughty quiver Oh, don't remind me of the whole NES/SNES classic kerfluffle.
Piception
now that I have a zero w I need to finish my emulator project
@haughty quiver but you can just us a pi <--- said by someone on every blog post about it
use
+1 on the micro preference
just wait until the n64 version comes out next year and they personally visit every house to kick their dog
LOL
Honestly, unless the post launch supplies are amazing (they have already said they're cutting off production by the end of the year), I'm done with Nintendo. Not a dime more of my money to them.
So, question for Show and Tell - Are commercial projects allowed?
What's really interesting is how people hacked the NES classic within a few weeks of release...
@river peak there have been some in the past
@river peak yah sure, all depends, did you make it, design it, etc?
@waxen thistle I haven't done it to mine, but it looks like a simple, clean mod, huh?
It's just a generic Allwinner quad core Cortex A7 processor. Can get Orange Pi boards for ~$20 that are better, but about equivalent. Would be fairly straight forwards to modify the binary from the NES Classic to run it on another Allwinner processor.
@waxen thistle hacked to do what?
run other games
ah
<@&327289013561982976> Could we share a computer project on show-and-tell or would that not fit?
@rapid hornet lots of flash space left for more ROMs on the NES Classic. The entire NES library fits, no problem
@rapid hornet Mainly to add other NES games to the same UI
It IS a nice UI for a couple dozen games only
I mean, I put the entire NES and SNES libraries on a 4 gig (I think) SD card
WHOOPS I DIDN'T REALIZE THAT WOULD SHOW UP ON SCREEN
oh wow it's a 16
Sentient electron microscope....
@open girder Well, yes. Yes, yes, etc. Aside from the fact that they're manufactured elsewhere (Assembling PCBs by hand is... annoying), the work is mine.
@glossy glacier replace transistors after you replaced all of the 
When the electron microscope says "Here's lookin' at you, kid"....you probably just got cancer. 😦
I'm in!
I'd startig slaping heathsinks everywhere...
yay @compact seal welcome
The 3D printed stuff isn't mine, but the guy who does is my regular collaborator and I could easily drag him into showing stuff off.
looks like there are two of you
Yeah this is the real me
I saw this device today, no guide but a somewhat description. time to figure out my own http://vtol.cc/filter/works/motorgan
i wonder if a quadcopter rotor would be a cool sound add on to it
see, I can do photo + text at work...
ok perfect @compact seal
10% off all items in stock code is TRINKETPARTY expires 8/23/17 @ 11:59pm ET #askanengineer http://www.adafruit.com @open girder
@glossy glacier SEM made me think of this: https://en.wikipedia.org/wiki/Ship_of_Theseus
The ship of Theseus, also known as Theseus's paradox, is a thought experiment that raises the question of whether an object that has had all of its components replaced remains fundamentally the same object. The paradox is most notably recorded by...
@severe inlet lol, i am just about to that point...
Oh, man, Ship of Theseus is the best analogy. It comes up far more often than I'd expect.
@rapid hornet what's the best room to discuss M0 porty stuff?
Ready to sing along to TrinketParty Tonight...put on my old BFIII stee
How do you get anything done?
If CircuitPython-specific, #circuitpython-dev ok too
I'm thinking of using JerryScript as the base interpreter and then creating a platform with hooks for hardware
Anyone have any luck soldering a tenna connector to the Pi0W?
@everyone we are live! https://youtu.be/yez5ZzeQW3o
LIVE CHAT IS HERE! http://adafru.it/discord What is “Ask an engineer”? From the electronics enthusiast to the professional community – “Ask an Engineer” has ...
I like the music tonight
discord + flashing notifications on my keyboard is pretty cool
will I be unpopular if I say that having twitch and discord on screen at the same time is quite impractical ?
Snazzy music
GO TEAM FRUIT!
Discord in a sized window maybe
@upper sandal I've heard it from others
thanks music from @hard hollow should be on our soundcloud
twitch is on my laptop screen and chats on the monitor
Could there possibly be a trinket on the show tonight, @open girder ?
twitch is on my chromecast, and chat is on the macbook
@upper sandal Just get more monitors, that's always the solution, right?
Youtube/splitscreen/discord on the iPad here
@river peak I'm tempted by the ultrawide
I have many monitors, but I have only one pair of eyes 😉
I have four tabs up right now, one in each corner... discord, YT, bank site and You Need A Budget. reconciling during Ask An Engineer (gotta see if I can afford a trinket, right?)
bought ~900$CAD last week… glad I caught the code thise week but just dropped another 250$CAD… phew
Youtube on the big screen via chromecast, Discord hogging up the chromebook
?membercount
921
218
920
1
the thing is discord has a minimum size and won't hide the channels list, maybe there is a way to hack it
That lonely little bot... feel bad for him
Just one bot? I think the robot is fudging the numbers to hide their true power...
There's about a 4 second delay on via YouTube, I took that into account last week, that's how I was able to call in without hanging up that time haha.
"shhhh, spoilers!"