#tech-support
1 messages · Page 617 of 1
because if I can't enter there I assume I can't progress the story
are you playing a randomized save
Is there a file I can edit? F1 isn't doing anything for me.
f1+fn
A custom game, specifically. Custom Starter, otherwise it's essentially Classic Mode.
try updating your game again
Right. I've tried that, and a completely different keyboard. The function keys work on both boards
and then fix the game again with the help man
Get this every time I try to catch Necrozma
then you are out of luck
fix game via help man, see if that resolves it
I mean, it's on the latest version, but okay. I'll give it a shot.
Damn
yeah the keybinds thing is only accessible via F1 or F1+FN
Ok I'm doing a clean install
you know what all you need to do for that right?
So... This happened
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
Just to be sure, it comes with all up to date custom sprites right? I don't wanna run into this again
Ah
Got it
Thanks
yes, a fresh install will come with all but the 3 most recent packs
Yeah, erase all game files and reinstall using the lightweight installer from #downloads
partly correct
It means 110, 111 and 112?
Where can I get those?
How to Clean Install:
- Delete existing files/folders/zip/etc. of Infinite Fusion [this doesn't include your saves] (even from your recycle bin)
- Restart your device
- Get a fresh download of the files following the guide for your device
no, 111, 112, 113
I haven't reseted my laptop but it opened just fine
113 is found in #spritepack-releases you'd need to get the other 2 in #announcements let me link the corresponding messages
Didn't work. I'm getting a different error now.
i mean that is progress
okay so it launches from my file manager but shortcuts won't work?
my game will not load anymore, screen will appear and then it vanishes
for 112, click the link that says monthly pack
make a new shortcut
i did
?tag olddata
The most likely reason your game is opening and closing is due to improperly updated game files. We mention in #downloads to not update ANY files versions 6.4.2 and below.
If you're using the Launcher:
- Open the settings tab
- Click "Reset Config"
- Re-update
NOTE: The original path that the launcher shows will be your old game folder. That folder should be deleted. The new game folder will be inPIFLauncher1.1.1/GameFiles/InfiniteFusion
If you're not using the Launcher:
Use the Lightweight installer guide to install in a NEW folder ➡️ Click Here⬅️
If you are on a non-Windows device, follow the [guide](#tech-support message) for your device to reinstall.
Reinstalling on Windows does not affect Save Files in any way.
i've got 2 other things for you to try
ah nvm it was just being funny it seems to work now
I'm listening
do a clean install of the game files, if you scroll up a bit you can see how I explained that
if that yields the same problem [even with a different error] then we can move onto the second option
What about 111?
Nvm
Got them
To successfully import your own custom sprite, please follow these steps:
Sprite Requirements:
- Format: The sprite must be in
.pngformat. - Naming Convention: Name your sprite according to the game's dex numbering. For example, a fusion of Aegislash and Goodra should be named
329.446.png.
Importing Your Sprite:
- Ensure your sprite meets the criteria above.
- Open your game folder and navigate to
Graphics/CustomBattlers/Sprites to import. - Paste your sprite into this folder.
In-Game Instructions:
- Launch the game.
- The game will automatically detect the new sprites.
- If you have an existing sprite that you're replacing, select the option "Replace All the old sprites with the new ones" when prompted.
Once completed, you can view your custom sprite in-game from the Pokedex's Sprite tab.
then just copy all the sprites in the custom battlers folder and drop them in the above listed folder
Does anyone know if the Android version has been released yet?
it has not
How to get sprites back from old update?
later tonight or tomorrow
anyone else getting error starting the game in new update?
screenshot the error in question
and post it here
A ss, Thanks
thanx
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
do what the bot says
that will resolve the problem
just note any game update you will need to do that because the file got renamed
Fixing the game did not change anything, Necrozma still crashes
hi i recently pressed yes to updating sprites and the sprites were not updated at all
try reupdating the file
did a clean install, didn't do diddly.
Hi guys, I notice with both charizard/gardevoir and metang/deino, using DNA reverser has caused me to switch to the undesired ability (blaze over synchronize and clear body over what will eventually be levitate); the latter is a huge bummer. I just downloaded the game last week. Is this normal gameplay or a bug?
ok, one last option, if this fails then i think something with your save borked
thx
heck
?tag altdownload
Alt Download
Use our alt download that has the game already installed for you without needing to run the installer. These files 100% work. No need to transfer files/saves to this at all. If these files are still giving you issues, the issue is on your end, not the game files: ➡️ More Info
^try this
is there a domunemt or something that tells you how to safely and correctly uninstall the game? last time i did it i messed something up and i don't want to repeat it
just delete the game folder
that is uninstalling it
bout the only thing that won't touch is your saves
If I where to delete the InfiniteFusion File in PIF Launcher File & replace it with the new one I download will that some what fix it? all tho I still won't be able to use the PIF Launcher cus it will read it as "corrupt"
i'd recommend a clean install
if you don't want any files, delete it
yea thats what the "new one" I was talking about is
im getting the 6.5.1 error so just making sure i do everything right
if you are getting that error with the launcher
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
i did but when i try to open it it just imediatly closes, so either i'm doing something wrong or i need to just reinstall it again from scratch
if a clean install is showing corrupt, even with the launcher fix i just posted, then try the lightweight installer instead
?tag olddata
The most likely reason your game is opening and closing is due to improperly updated game files. We mention in #downloads to not update ANY files versions 6.4.2 and below.
If you're using the Launcher:
- Open the settings tab
- Click "Reset Config"
- Re-update
NOTE: The original path that the launcher shows will be your old game folder. That folder should be deleted. The new game folder will be inPIFLauncher1.1.1/GameFiles/InfiniteFusion
If you're not using the Launcher:
Use the Lightweight installer guide to install in a NEW folder ➡️ Click Here⬅️
If you are on a non-Windows device, follow the [guide](#tech-support message) for your device to reinstall.
Reinstalling on Windows does not affect Save Files in any way.
then change the application file name so you don't get the 6.5.1 error
every time i go to knot island i get told my randomizer has messed up and i need to reshuffle even after i have reshuffled
fix game, then reshuffle
if the issue persists after that, come back
got it
here's a minor one. autogen dex entries keeps turning itself back to 'off' as soon as I exit the menu.
So it worked. I guess downgrading to the previous version (6.5.1) via the altdownload method helped.
So I'm guessing a script got mucked up somewhere in 6.6
weird, save the game, close the game, relaucnh, load your save, change it, save again and go back in to see if it stays
hm
@loud sigil since you have porygon powers, might want to bug report log this
seemingly fixed via alt download install [which is still on v6.5.1]
so it is unique to 6.6
might be a good idea to make note of both errors I took screenshots of.
Seems like entering the menu is the thing turning it off, if I stay out of Options it stays active
odd
very strange but not intrusive
No, not the Pokemon Tower, the "Pokemon House" map, Mr. Fuji's house below the tower.
oh
Hey! I did the sprite problem thing, clearing the cache. But when I went back to do a fight the foe's Wigglytuff sprite didn't appear
There is a solution for this?
you likely hit the download cap [if you have download data turned on]
be patient, need to wait til the cap timer resets [only frog knows this]
just keep playing, sprites will eventually reorient themselves
okey thanks
and specifically, his house was in the state where he is absent, but before you see him being taken upstairs by Team Rocket.
so it's entirely possible that the bug could also be tied to story progression
Ok I know what the base sprites in the packs are for, but where do I exactly put them? Is it in graphics/battlers?
nowhere
the other folder isn't needed
those are all sprites the game doesn't use under normal circumstances
think of those as extra sprites
I put the new eggs for numel and the alola dragon
that's fine
What file is the launcher under? I did the redownload and the game works but the launcher is gone
And in the readme file says the triples are just alternative sprites for triple fusions
Triple Fusions are not meant to have alt sprites. You can only manually change their main sprite. For more info: ➡️ https://discord.com/channels/302153478556352513/1195043740855832586
you only need the custom fusion sprites
guys my internet provider sais firemedia link is malicious
it is fine
as long as it is our links
from this discord
I think it's for like, if you wanna swap the existing ones
the launcher is discontinued from #downloads
that is what those sprites are for, they aren't needed
I dont see that in downloads but im also blind xD. Thank you.
you don't see it because it got removed
?
I take it that it will remain in the guides for the time being but likely get removed from there as well
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
alright i'm stumped again, the launcher is being weird so i tried doing it with the install or update.bat
it's saying this, is this correct or no?
guess I will make a thick note about it in #downloads too
yeah looks fine
Guess now I'm ready to go
the letters/numbers following HEAD is now at will always be random and not match the guide
yep, keep download data on as an extra backup, the packs are behind the repo by at least a month
Mine is only called "infinitefusion"
but not every fusion has a custom sprite
i was more refering to the "6.6" since the launcher with the failed update window says the current version is "6.5.something" which feels wrong to me?
the .exe is likely hidden
where would it be 😭
as the bot thing we've been poking for part of the day says, the file the launcher USED to look for got renamed
what happens if i play in the older version? Do I risk corrupting my save file?
that is why it keeps going "hey you have a version that isn't correct"
I’m trying to do randomizer but I keep getting stuck on the wild pokemon are being shuffled
if you have stuff unique to the new version yes
try fixing the game via help man then rerandomize
you can
yeah you can
I cant find the infinitefusion.exe
you already found it
i only find infinitefusion
thats it
game
eh
lol
game.exe?
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
alright
you don't need to add the .exe part on
just rename it game
should resolve the shenanigans
now it wont open at all 😭 oh no my game
if you are using a shortcut, you will have to make a new one
Hi! I just downloaded onto my pc and started a file, how do I change the key mapping? I feel like I’m struggling some, I’m stuck at the beginning trying to change because I’m struggling with the keys, and would love to change them up if possible.
since it likely pulling from the old file, which you just renamed
?tag keybinds
You can press F1 (FN + F1 on laptops) to change your keybindings!
Be aware, controllers will be auto mapped to buttons depending on which controller you plug in.
If you want to remap buttons on controller, you need to use Steam since this game doesn't support it. How to use Steam: [Guide](#tech-support message)
I am sooo confused 😭
if you are using the shortcut for the launcher, that was linked to InfiniteFusion.exe, which you renamed
thus it is trying to find a file that doesn't exist anymore
so what do i do
somehow i fck it up again, i'm trying something hang on. Look i know i'm stupid and i get overwhelmed by things i attempt to understand that i dont
open the launcher from the PIF folder
then click play on that and see if it does the same thing
if it does then I would just honestly recommend moving over to the lightweight installer
since the launcher will continue breaking with each game update
my save file...
your save is not tied to your game folder
your save file is fine regardless. it is not affected by game files at all.
dont worry
oh so im good?
ye
then do i just need to install the game the other way?
just delete the PIF launcher folder
then follow the lightweight installer guide
?tag guides
All of our Official Guides to install the game are located here: [CLICK HERE FOR GUIDES](#tech-support message)
this one?
yep
I've tried uninstalling, reinstalling, restarting my computer, fixing the game, nothing works. I doubt my file is corrupted, so I can only assume something in the update broke Necrozma
there's some missing sprite texture
alr
oh boy
only fix is to use 6.5.1
?tag altdownload
Alt Download
Use our alt download that has the game already installed for you without needing to run the installer. These files 100% work. No need to transfer files/saves to this at all. If these files are still giving you issues, the issue is on your end, not the game files: ➡️ More Info
^use the files from here and play
I installed it clean and put in the sprite packs but it still dont show the custom sprites
I think
that sprite may be lacking a custom that is in the packs
the packs are behind by like 1-2 months
or if a sprite is there, it is invis, which means the old issue with credits hasn't been fully fixed yet
Dang
odd
try turning download data On if you have it off
if you have it on, turn it off, back out of those menus then turn it back on
you could have hit the download cap
just update your game
if you hit the download cap it is just a matter of waiting
it said to update it you have to delete
ok... so, youre saying i need to rename t=one of these to "game" and the launcher should be able to sort it out. correct?
Update: I edited the key mapping on my laptop and now only the directional ones work, I even closed the game. If I reset to default it works? But I don’t necessarily want them at default. Am I doing something wrong?
ok
that should resolve the launcher shenanigans
I can’t find the download tho
Having a bit of trouble
Anyone able to point me in the right direction with this error?
did what it asked but keep getting this error
then you didn't
because if you clicked ok, you'd have v6.5.1 via the alt download
best bet is fresh install using the lightweight guide
I did
I dowloanded that and then extracted it into my folders
into folders you already had?
that was a big NO NO
yeah, definately delete existing folders and get a fresh download using our lightweight guide
THANK GOD
wheres teh game file 😭
ok, i just witnessed it re-rename the exe file to "InfiniteFusion" when this came up. Do I re name it again?
odd, looks like something borked, rerun the install or update file
My son is beautiful now, all I did was open the game.exe instead of game-performance and it was fixed
did you update the game?
update file how
my poor rattata
ongod i did everything right 😭 🙏
i just said how
Bur now my keybinds are all weird
??? mb
?tag keybinds
You can press F1 (FN + F1 on laptops) to change your keybindings!
Be aware, controllers will be auto mapped to buttons depending on which controller you plug in.
If you want to remap buttons on controller, you need to use Steam since this game doesn't support it. How to use Steam: [Guide](#tech-support message)
wdym file 😭 im dumb
the same way you installed the game
the install_or_update thing?
you click the file named INSTALL_OR_UPDATE
bet
I pressed f1 and it opened fine but when I try to change it doesn't work
so you click in the box box to change a key and nothing happens?
i did it and it still doesn't change sadge I'll wait until this is fixed thanks for the help though 🙂
one of your messages say if youre having issues to "re-config" the files. i did that then the launcher kept failing to update it around the 97-98% mark and said to consult a doc. I made a new folder named "InfiniteFusion" for it to basically install the game again after renaming the exe to "game" and i'm currently on the screen that i sent the screenshot of just before
I click the box, press the button but it doesn't change and instead makes the action respective to that button in game
weird
you can try deleting the keybinds file and then see if you can change it [save and close the game first]
Hey @verbal timber! You can press F1 (FN + F1 on laptops) to change your keybindings!
Be aware, controllers will be auto mapped to buttons depending on which controller you plug in.
If you want to remap buttons on controller, you need to use Steam since this game doesn't support it. How to use Steam: [Guide](#tech-support message)
?tag save
Your save files and backups are in: C:\Users\YOURNAME\AppData\Roaming\InfiniteFusion
- The game folder includes a shortcut to the location above named
Savefileyou can double click. Each save corresponds to a slot (e.g., Slot A saves as File A.rxdata). - To transfer, copy the save file to the same location on the new device.
- For non-Windows devices, refer to the workaround guide for your device: [HERE](#tech-support message)
https://cdn.discordapp.com/attachments/700790080175996938/1327016763719684226/image.png?ex=6781882b&is=678036ab&hm=f10dd293ef9e2c0e6a8b1944e6a5a2e0e5539ca0fe75de7a0f948414df861b88&
the exe after is downloaded it again reverted back to "InfiniteFusion.exe" and i want to make sure that i need to again rename it to "game.exe" before attempting the update again
don't update unless you need to
it helped ❤️ But now my sprite on gardevoir/auroros is gone??? 😭 It has everything else
that will forcibly rename the file back to normal
if that doesn't do it, you hit the download cap for sprites
I was using the box at the moment but I will try in the overworld
crashing on wondertrade, consumes ticket though
wait. so the current version that dropped to day is indeed 6.6.0 despite at the bottom of the launcher saying the newest update is 6.5.1?
Dude seriously, tysm!! ❤️ Now i just have to redo my keybinds 
so by trying to update it leads to the error of "Your version is 6.6.0, the curent version is 6.5.1"
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
^this
which like i said feels wrong to me. how can the newest update of the game be listed as a lower number
Hey @rotund hill!
How to Update to the Latest Version (Windows)
- If you're on or above 6.4.2, double click
INSTALL_OR_UPDATE.batto update. - If you're below 6.4.2, you must either reinstall in a NEW folder (since the updater won't work due to bugs) or use the New Launcher to update.
- Reinstalling doesn’t remove or require you to move any Save Files.
- If playing on a Randomized save, make sure to reshuffle after updating. Use
?tag reshuffleif you need help.
For Non-Windows devices (Android, Mac, Steamdeck, Linux, Chromebook): Check our extended guides post
because the launcher isn't being upkept anymore
the dev behind it left discord as a whole for personal reasons
we were expecting it to break eventually
so ive been stupid this this entire time?
if the problems keep persisting with the launcher, I highly recommend moving over to the lightweight installer
no, we found a mini fix for the launcher but some people keep having issues
so as long as the top of the launcher says "6.6.0" there's no issue?
it just the launcher having a freakout?
well it'll be whatever the latest version of the game is
but all you should need to do is rename the one file to game
then when you click play it will see you have the correct file and not freak out [or it should]
i keep getting this when i try to update
nothing wrong
everything looks guchi
and so i'm understanding this correctly... the "lightweight launcher" is the "INSTALL_OR_UPDATE.bat"?
so i literally had so issue from the start? i am... not surprised
Cheers for the help
Apologies for the issues
and to correct something i stated earlier... the file didn't "re-rename" itself, a new instance of "InfiniteFusion.exe" just appered, i just didn't check enough
i apoligise for that mistake
lmao
so the tldr of the conslusion. from this point on:
Update using "INSTALL_OR_UPDATE.bat"
Play using "InfiniteFusion.exe"
Disregard the launcher
is that correct?
Yeah, I was only able to change two buttons, but the others no luck, Im trying to change B to A but it only opens up the menu in game and it doesn't change
ye
everytime i try to update i get this
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
though the renaming infinitefusion.exe was only for the launcher
so you don't need the renamed file
You can press F1 (FN + F1 on laptops) to change your keybindings!
Be aware, controllers will be auto mapped to buttons depending on which controller you plug in.
If you want to remap buttons on controller, you need to use Steam since this game doesn't support it. How to use Steam: [Guide](#tech-support message)
the game has limited controller support
Oh
here I was thinking you were on keyboard and the game just went "Nope, you don't get to rebind"
which it does do on occasion
source - me
was scrolling up a bit to make sure I don't just repeat previously asked stuff, but to clarify- if I'm getting the update error for 6.6.0, I need to go to the alt download to reinstall 6.5.1 right?
i thank you and appreciate your patience with my failures to easily comprehend you instructions. i've removed the old most likely corrupted files and tested the new one. everything seems working and save files are still present
or is it a pc issue for properly running/updating 6.6.0 files
no worries
you had the necrozma error right
I didn't look too closely at the error to be honest
those "old" files. when i'd rename the exe to game it's image would change to the old logo so i'd assumed that aint supposed to happen. the new one kept the new blue and purple logo
nvmd, you have the launcher error
Yeah, I tried updating through the launcher
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
^try this
if that fails, you need a fresh download using the lightweight installer
doesn't matter now, they're gone. new one works perfectly fine
Alright, will try that
let me just... un-pin the launcher from my task bar and we're completely guchi XD
When I relaunch the launcher, should I try to update the game again or just run it
then delete the pif launcher folder and get a fresh install with the lightweight
not in the mood to go on long troubleshoot to figure out how to solve that
the launcher is effectively dead anyway
alrighty
your saves are fine
thanks for the help
actually one last question before i f-off, @verbal timber . What is "InfiniteFusion-performance.exe" anyway?
yeah I know
np
a scaled down version of the normal application
meant to run on lower end machines or older devices
ahh i see. its the 144p version XD
pretty much
ahh ok, thanks
when you say delete the launcher folder do I just wipe my app with it? Probably dumb question but just wanted to make extra sure
the PIF folder has everything it needs
so deleting the folder will delete everything inside it
so when I get the lightweight installer it'll sort all the relevant files out while installing right
the guide goes over that
Hi, does anyone know why since the last update a lot of sprites are just gone, even showing the spriter's name ?
What's the button to switch to move mode in the box?
i don't think there is a dedicated button for that
i can only assume it mease just highlight and delete these two files? correct me if i'm wrong
no
there is no mass move button
you should have had all the PIF launcher files in 1 folder
nvm then
lol
no touch then?
if you still have those you can yeet them
as long as the remaining game files aren't touched
sometimes the game files can be weird
yeah go ahead and yeet those
if things bork, just rerun the INSTALL_OR_UPDATE batch file
will give you everything you need
that what i ment with the above message. sorry i wasn't clear
two files in red box in pic = yeet?
commencing yeeting
the only things in that folder now are Gamefiles and Appfiles
appfiles may also not be needed but im not 100% sure
i think that is all stuff for the launcher itself
ill leave it untouched then, just in case
I mapped my buttons through steam just like in the guide but they aren't working
Is it possible to download an old version of the game? On update 6.6 not all sprites shows up for me
known issue
It's like veryyy laggy if I scroll on a pokemon with a question mark
if that doesn't fix it, you likely hit the download cap
Tried, doesn't work
then you hit the download cap
That's a thing??
So the new update broke my quest journal. It won't update with the quests I completed. Any way to fix it?
What is it, sorry to annoy you
Oooh
A better explanation is that for the game to download sprites to your computer, he hosts all the fusions on a server. This server is free as long as it doesn't hit the bandwidth/no suspicious behaviors
which, got the last server nuked.
not free
frog does pay for it
it cost less then
but he keeps the download in check so he doesn't pay more
that and the server doesn't ban him again
okay, what is preventing them from banning him again due to a suspiciously high download rate 
he has it controlled
yeah, which is why we have the download cap, just saying it could happen again
So I just have to be patient? I just wanna play pkm 😔😔
he set it so the game can only download so many sprites at certain intervals before it locks up
the download cap is so frog doesn't pay more than he already is for the repo host
source
that was what part of the 6.3 beta was for
so he could fine tune that limit
the new update broke my quest journal. It won't update with the quests I completed. Any known way to fix it?
help man, fix game
if that doesn't do it, then it might be a bug with 6.6+
Aight. Wasn't sure. Danke
in which case we'd need screenshots so the porygon team can log it
Alright thank you very much for the answer
Not to be annoying but where would I send those?
Okay last question and i'm gone.
Approximately how much time do I have to wait so Frog can get past the download cap? (Like how much time it took last time)
here
only he knows
and he hasn't shared
we don't know the number of sprites nor the amount of time needed
and he isn't getting past the cap, your game is
Crap
Sorry I meant this , i'm french so im kinda dumb
Now Geodude is a big question mark
no worries
yeah just likely means you hit the download cap
the download is likely getting hell slammed right now
so probably hitting the cap frequently
not much you can do but keep playing
What do i do if my game doesn't even load anymore? I ran the installer and i tried renaming to game.exe but nothing worked
if you are using the launcher, don't
it isn't being upkept anymore and isn't working correctly with the current game version
best bet is delete your PIF Launcher folder and get a fresh install using the Lightweight Installer
?tag guides
All of our Official Guides to install the game are located here: [CLICK HERE FOR GUIDES](#tech-support message)
The three quests I completed, showing the completion dialogue, with the ongoing quest journal not updated. Also the Quest man hasn't updated his numbers either
Not sure what the cause is but if this needs any more screenshots or something lemme know
I need help, i upgrade my game with the command Installl or update but i have two set of application and no one launch the game (sorry for my english, i speak french)
Oh ok, so it doesn't harm my game at all just that some sprites won't load, that's it?
yep, no harm no foul
fresh install would be your best bet
it worked, thank youuu
hello, i asume i aint the only one having this issue, but it keeps happening everytime i try to use a ticket to trade, anyway of solving it?
Yeah I got that error too
worst part of it, you lose the ticket
How do you tell what version of the game you have?
I'm trying to update it
I double clicked on this and it pulled up this
Is it updating?
if fixing the game via the help man doesn't resolve it, then it may be an error unique to 6.6+
title screen of the game has the version
but so far from what I see out of that command prompt, it is updating
ok good
I had to delete the screen shot to protect private info
please, i need help. I wanted to update my PIF from v6.6.0 to the v6.6.1, but at the start of the game it still says v6.6.0. And some of the sprites of the game now are missing, they appear as a question mark ("?") or just a blank space. Is there a way to fix this without losing my game file? (sorry if there is a grammar mistake, English isnt my main language)
How do I ask the bot how to get to a city?
move off the launcher
it isn't being upkept anymore
how so
swap to the Lightweight Installer
delete the PIF Launcher folder
get a fresh download/install of the lightweight
using that guide
oh thanks!
if that fails, you'll need to be patient, there is a limit to how many sprites the game can download and it is being hammered
will not be at my pc for a bit so no one need help since i think all the usual tech support staff is on break
nothing appeared when i downloaded it
Did you get guys removed some sprites
in my folder no
When I finished updating it all it does when I try to play it, it goes on my screen for a few then dissappears from my screen
the issue is i don't see anything in that which would indicate an issue
rerun the batch installer
some sprites did get removed though; not much we can do about that
?tag olddata
The most likely reason your game is opening and closing is due to improperly updated game files. We mention in #downloads to not update ANY files versions 6.4.2 and below.
If you're using the Launcher:
- Open the settings tab
- Click "Reset Config"
- Re-update
NOTE: The original path that the launcher shows will be your old game folder. That folder should be deleted. The new game folder will be inPIFLauncher1.1.1/GameFiles/InfiniteFusion
If you're not using the Launcher:
Use the Lightweight installer guide to install in a NEW folder ➡️ Click Here⬅️
If you are on a non-Windows device, follow the [guide](#tech-support message) for your device to reinstall.
Reinstalling on Windows does not affect Save Files in any way.
so is Necrozma just busted
someone got a necrozma error earlier, i told them to use an older version that is still available for download but never heard back on whether that fixed it
outside that I'm not aware of any other issues with necrozma
my game just crashed after I caught it
did you get an error that just said necrozma a bunch of times?
let me catch him again and ss the error
Is the android download link updated to the newest version? I just did a fresh install and when I load in my game is still saying 6.5.1
person who updates that is busy, either later tonight or tomorrow it should get updated
I would like elaboration on updating. It says to uninstall and reinstall, which files do I delete?
Alt Download
Use our alt download that has the game already installed for you without needing to run the installer. These files 100% work. No need to transfer files/saves to this at all. If these files are still giving you issues, the issue is on your end, not the game files: ➡️ More Info
yes
anything that isn't your saves and is associated with the game
okay, got it
should I delete anything this time?
Ah, oki! Thanks for the info!
no, keep your existing folder, this will be a new one
I just downloaded the android version but it says version 6.5.1 on the home screen instead of 6.6. is this correct?
see above
android hasn't been updated
later tonight or tomorrow
Ah ok ty
grab those files, extract it, run your save and see if you catching necrozma yields an error
if it doesn't please let me know
will do
yeah, understood
Thank you
Triple fusions won’t let me view sprites and the show a kanto starter and ? As the box sprite
I’ve cleared sprite cache
No tag triplealts found.
Triple Fusions are not meant to have alt sprites. You can only manually change their main sprite. For more info: ➡️ https://discord.com/channels/302153478556352513/1195043740855832586
the box sprite is supposed to be like that
they lack a custom party/box sprite
as for the battle sprite, if that is borked and you have download data turned on, you hit the cap
give it time
should resolve itself
should being the keyword
caught Necrozma, no crash
ok
😦
fun
should I just continue 6.5.1 file then?
delete the pif launcher folder, download lightweight
or try to rerun it on the 6.6 and see what happens
Understood
try swapping back, but keep the alt download as a just in case
Will that affcet my save per chance?
okie dokie
saves aren't tied to your game folder
Perfect! Thank youuuuu!
this is the second time today we've had that crash
10/10
it is busy today thanks to the update
^this chat for awhile^
Alright relaunched from the 6.6 save, Necrozma is in my PC without issue w/ Ultra Necrozma sprite and item

I'm gonna withdraw and try battling to be extra sure it's fixed
but thanks for the help
already did
what option do i pick when talking to him?
fix game
bummer
fused with it, no issues
you can always buy more tickets with pokedollars [the second teller at that counter will sell them, but they ain't cheap]
if that fixes it, let me know; if it doesn't the same [whether you get the same error or a new one]
Ok, I uninstalled and reinstalled everything, it's updated, but now all the custom sprites I was using are replaced by the default sprites
yeah
the update did that
you can change the sprites
?tag alts
To change a Pokemon's sprite to an alternative one, go to their Pokedex entry (this can be done from their summary screen) and go to the "Sprites" tab. Here you can scroll through the different available sprites.
https://www.youtube.com/watch?v=VOY_mxJ-Bx8
I mean like this, this used to be iron thorns
oh, thank you Ill try this
it is possible the sprite you were using got removed from the game
It is specifically the 6 pokemon on my team, all of the sprites are doing this
the update reset all the sprites for some unknown reason
np
Do I Need to update the game for Android
android doesn't have the update yet
Ok thanks 👍
Is there a way for me to view key binds? Playing on steam deck
Running into an issue where I tried updating on the launcher when it said I had an update due right after redownloading the game directly. Then got this error
Now it isn't opening from either the launcher or application.
Hey @glass jewel! You can download the game from: [#downloads](#downloads message)
If you need a guide, they are located: [HERE](#tech-support message)
Hey @glass jewel!
How to Update to the Latest Version (Windows)
- If you're on or above 6.4.2, double click
INSTALL_OR_UPDATE.batto update. - If you're below 6.4.2, you must either reinstall in a NEW folder (since the updater won't work due to bugs) or use the New Launcher to update.
- Reinstalling doesn’t remove or require you to move any Save Files.
- If playing on a Randomized save, make sure to reshuffle after updating. Use
?tag reshuffleif you need help.
For Non-Windows devices (Android, Mac, Steamdeck, Linux, Chromebook): Check our extended guides post
?tag keybinds
You can press F1 (FN + F1 on laptops) to change your keybindings!
Be aware, controllers will be auto mapped to buttons depending on which controller you plug in.
If you want to remap buttons on controller, you need to use Steam since this game doesn't support it. How to use Steam: [Guide](#tech-support message)
so when i go to launch my game it opens and immediatly closes any suggestions?
delete PIF Launcher folder, download lightweight
?tag olddata
The most likely reason your game is opening and closing is due to improperly updated game files. We mention in #downloads to not update ANY files versions 6.4.2 and below.
If you're using the Launcher:
- Open the settings tab
- Click "Reset Config"
- Re-update
NOTE: The original path that the launcher shows will be your old game folder. That folder should be deleted. The new game folder will be inPIFLauncher1.1.1/GameFiles/InfiniteFusion
If you're not using the Launcher:
Use the Lightweight installer guide to install in a NEW folder ➡️ Click Here⬅️
If you are on a non-Windows device, follow the [guide](#tech-support message) for your device to reinstall.
Reinstalling on Windows does not affect Save Files in any way.
thx i shall tryy
I don’t have an option to press F1 on the steam deck
you have to change your steamdeck controller layout [not in game]
just did a backtrack to see if it got mentioned anywhere else
Thanks I’ll try that
Do you know what button the “speed up the game” button would be on steam deck? Not finding anything that does it
Hey @acoustic kite! To Speed Up your game, hold Q (or Spacebar if you are using Game-performance).
You can change the settings in game to be hold or toggle, see the image below!
- When set to Hold, the speed multiplier can be set up to x10
- When set to Toggle, the speed will cycle through x1, x2, and x3
no idea
That did it! Thank you so much!
my game gave me a 'failed to update' message box
if using the launcher, don't
it is currently broken for 6.6+
use the lightweight installer
if you are on mac, linux, chromebook or steamdeck...then i dunno
android is not updated as of yet
Is there a way to move the save files over?
in what capacity?
like from one pc to another
keep my save files from the previous install on the same pc
your saves are not tied to your game folder
ok
long as you had v5.1 or higher, your save is compatible
anything lower and we run into some issues
especially if they are from the ancient 4.9.2 version
ok I had the last version before this one
then you're good to go
sweet
ok even if I didnt have it all in the downloads folder?
Your save files and backups are in: C:\Users\YOURNAME\AppData\Roaming\InfiniteFusion
- The game folder includes a shortcut to the location above named
Savefileyou can double click. Each save corresponds to a slot (e.g., Slot A saves as File A.rxdata). - To transfer, copy the save file to the same location on the new device.
- For non-Windows devices, refer to the workaround guide for your device: [HERE](#tech-support message)
https://cdn.discordapp.com/attachments/700790080175996938/1327016763719684226/image.png?ex=6781882b&is=678036ab&hm=f10dd293ef9e2c0e6a8b1944e6a5a2e0e5539ca0fe75de7a0f948414df861b88&
^the above only applies for windows pcs
but you get the idea
and next time, keep it all in downloads to avoid both onedrive [or other cloudsync shenanigans] and permission issues
I have a whole hardrive for games lol
ahhh ok
hahahaha
how to stop the screen freezeing when a new sprite is on screen
?tag performance
Performance Issues - Freezing? Lag? Long Black/Loading Screens? [More Info](#tech-support message)
^steps 2-7
Is the lightweight install on the latest version?
i am having painnn trying to fix this lol i played just fine this morning now its saying i have files corrupted
oof
?tag backups
How to restore to a backup save
This only works if you had Auto Save turned on and using 6.4+
- Open your game folder
- Double click
SaveFile - Double click the folder named
backups - Double click the folder of the save slot you’re reverting. Ex:
File A - Rename the most recent file to
File A.rxdata(The letter will be different if you’re reverting a different save slot) - Copy the newly renamed file and paste it into the previous folder. (This will be the folder you had open after step 2) When asked to replace, click
yes.
Note: If you don't feel comfortable overriding the save, you can rename it to a different letter on step 5. Ex: File B.rxdata instead of File A.rxdata
https://cdn.discordapp.com/attachments/700790080175996938/1339332214110027796/image.png?ex=67ae55d3&is=67ad0453&hm=16145fc726c1cee190c94f4856722046e1b76e665b0b6f26611c8ed94617d7fa&
I downloaded from there, saw it was on 5.6.something, updated via the .bat, and now it does the open and immediately close thning
^try loading a backup file
?tag olddata
The most likely reason your game is opening and closing is due to improperly updated game files. We mention in #downloads to not update ANY files versions 6.4.2 and below.
If you're using the Launcher:
- Open the settings tab
- Click "Reset Config"
- Re-update
NOTE: The original path that the launcher shows will be your old game folder. That folder should be deleted. The new game folder will be inPIFLauncher1.1.1/GameFiles/InfiniteFusion
If you're not using the Launcher:
Use the Lightweight installer guide to install in a NEW folder ➡️ Click Here⬅️
If you are on a non-Windows device, follow the [guide](#tech-support message) for your device to reinstall.
Reinstalling on Windows does not affect Save Files in any way.
there's no way you downloaded from here and got that version
as that version never existed
last version in 5 was 5.3.1.2
Hmm then I mustve read it wrong. Ill try again
a fresh install will fix it either way
correction: 6.5.1
Gotcha. Thanks! Sorry for the trouble!
the issue you have usually only occurs when you have older files that you tryied to update
no worries
i'm filling in for the porygons while they take a break/are dead
Does it mess it up when I copy the old savefile folder back into the fresh install? From the version before this latest 6.6 update
Got this when trying to update from 6.5.1 to 6.6
nothing wrong here
it keeps saying my game was not updated successfully
no need to copy the savefolder
what you copied was a shortcut to where the saves are actually stashed
a fresh install would just give you the same folde rthat shortcuts to the same place
The update is failing for some reason.
don't use the launcher, it is dead
delete your PIF Launcher folder, fresh install lightweight
screenshot the entire thing
post it here
oh interesting! I will not do that lol
lol
RIP launcher
we gotttt it bois
i just reinstalled lol
ah ok
You have to reinstall the game vai #downloads
delete your PIF Launcher folder, download lightweight
i thought i did
nope
that is the launcher
oooh well i see where i was having issues then haha glad i did lightweight this time
which at current is borked hard with v6.6+
it broke today with the update
Forever?
yes
the dev behind it left discord entirely for personal reasons, and only he had the code for it
Goodbye Launcher and Launcher dev.
Will that change how sprite packs are downloaded?
does anyone know if i can edit my savefiles on linux
?tag cheating
Per Rules 23 and 24 in #rules, we will NOT assist with ANY code modifications or cheats. Modifying game files in any way VOIDS all tech and game support from us.
Attempting to edit code to enable debug will not work. Debug is only obtainable as an in-game reward for catching all 501 Base Pokémon.
The ONLY fix for your error is to delete your game folder and reinstall using the files linked in #downloads . Reinstalling will not affect your save files.
oh ok
ok its working now
ohh man my sprites are cookeddd
Eyy youve fixed it! Thanks so much!
To perform a fresh install, do I just delete the previous folder entirely before i attempt to reinstall?
thats what i did
My apologies, I may have missed it, though I tried to read through everything, have the android files been updated yet? Just curious as I am a literal country away from my PC and got excited about the news 🙂
the person who does the updates for that guide is busy or asleep, check back tomorrow
Sure thing, thank you and have a good day 😄
-# they are currently working on updating the files rn
-# well all of them android is most likely last
Technically she was at work
-# Hello 
hi, just wondering whether deleting the launcher is still the best option to fix the failed update issue?
launcher is completely broken delete it
its most likely going to be scrapped it
as the person who made it is gone and it can no longer be upkept
thankyou, getting the lightweight now
Workaround download links are temporarily down. Will make an announcement here when they're back up.
when i load my save into the new version i just get a black screen in the world, i can open menu and it shows, music ect. battle screen shows. just the map world, anyway to fix this?
Hey @gaunt steppe! Black screen in this game is the loading screen. The duration of the black screen depends on YOUR computer and YOUR internet.
- If you get the message below while opening the game, this means to stop clicking/pressing buttons on the screen as it is loading.
- If you get the message while in game, this means your computer is struggling.
- Use our performance tips to help your issues: [More Info](#tech-support message)⬅️⬅️
What version of Windows are you using?
the same as yesterday Windows 11 24H2, worked yesterday but when i downloaded new version with lite installer i load my save i see the screen and then fades to black. everything else works i just can't see where i am going lol.
i ran into a trainer and it showed the battle ect
if it matters where i am in the game, in the rainy part of route 25
Try running "InfiniteFusion-performance" instead of "InfiniteFusion"
if that includes the altdownload, leave that one, or keep the current 6.5.1 as a backup
It does, they're the same files
there's a bug involving necrozma on the current version that is gamebreaking
and so far the only fix has been a revert to older files
Mediafire only allows 10 GB. Unless I want to pay them, I can't keep files as backups on there
shit
uh
we need the 6.5.1 download in some capacity until frog can fix the Necrozma glitch
Gimme the rundown on the Necrozma bug so I can forward it to frog
He doesn't even know about it right now
I poked ymir about it awhile ago
other instance of it
Yea, Ymir was already offline so he never saw it 
ah
I forwarded it to frog.
but yeah, it only seems to happen with 6.6, using an older version worked fine [at least for Deli since they were nice enough to confirm it]
The issue with having people revert back when their save was already on 6.6 is that it could lead to bag corruption if frog added new items
Outfits likely cause it too and I know he added more of those
i know, but that was all i could think of at the time to fix it
👍
here is what happens to my game. i tried both performance and normal exe and sound is playing i just didn't record the sound
Are you using windows 11 home or pro?
home
?tag performance || Then go through these
Performance Issues - Freezing? Lag? Long Black/Loading Screens? [More Info](#tech-support message)
ok
Got it working with the lightweight installer. Thanks again @verbal timber !!!
If none of that works, then check your graphic drivers. If that still doesn't work, then for some reason your device can't run the game correctly anymore
incorrect, i just started a new game it runs fine. tis the save file
but losing saves sucks

smol thing that isn't a tech issue but visibility just in case it matters
the full changelog in pastebin does not include that the debug menu was changed to give options to choose specific shiny for head and/or body, instead of having to make the base shiny then fuse.
https://i.imgur.com/OIOkVGZ.png
but it does include the debug options for reaching level caps
-# unless im dumb and misremembering but im pretty sure it was just "make shiny" before
Yea, it was. I haven't fully read the changelog yet, ngl
Iirc, he mentioned it to us porygons prior tho 
i am guessing bugged saves can't be fixed?
cannot
would have to load a backup if its not broken back then
but if a save is already corrupted for w/e reason
it's not corrupted per say
just has black screen glitch
it works just map turns black everything else works
Cowect
I seem to still not be able to launch the game after updating. Playing on steamdeck
Just noticed that the mediafire download page for steamdeck is also down. Does that mean that the new version is being uploaded soon?
Idunno what this means, but it shuts off the game when I enter the orphanage in Lavender Town
so I forgot here but what is the diffrence between the .exe and the performance.exe?
I tried to upgrade the game, It went to 100% but the error windows poped up (I don't see any error in the errorlog), now the game close as soon as I click on Play
the launcher does not work Currently with the updates see the downloads tab explains you have to redownload and install etc
does android not have 6.6 yet?
bruh
am I wrong? if so ill delete the comment but it says that in the top of the downloads section the launcher isnt currently supported and have to do through the light version and etc
no no you're right no worries, I'm just reacting to it bc I had the same issue as Dess
meanwhile i am on android and still getting v6.5.1 from the download files
android is not updated.
my way of having to dosnload is different because i have to redownload the game to updatw
ah ok
windows updates automatically -- the workarounds need a bit
Ok thanks, I'm downloading it again then.
i figured as much
update: i managed to fix my save with the black screen. the issue was causing by the rain affect or something in route 25. i blinded my way backwards and it fixed the issue. if anyone else has this issue this is how to fix it
Hey @gaunt steppe! Black screen in this game is the loading screen. The duration of the black screen depends on YOUR computer and YOUR internet.
- If you get the message below while opening the game, this means to stop clicking/pressing buttons on the screen as it is loading.
- If you get the message while in game, this means your computer is struggling.
- Use our performance tips to help your issues: [More Info](#tech-support message)⬅️⬅️
Yeah the same issue had been happening to me on version 6.6. It may be something wrong with the scripts for that house in general, because that error doesn't pop up on 6.5.1
Which sucks because you NEED to be able to access that house to start and finish the Lunar Feather questline to obtain Cresselia and Darkrai.
gonna investigate & report to the dev, one moment
If it means anything, I accidentally killed Darkrai and reset to before I did the quest by mistake
i am able to enter the orphanage just fine
It probably doesnt if you have that problem too
im gonna see on a fresh file
🤔
yeah. fresh file, i'm able to enter
bizarre
Had you fought Darkrai beforehand also, twerp?
since going to 6.6, i am missing a few fusion sprites i had in 6.5.1 for my own team. any fix for this?
Hello, I keep getting this error. Anyone knows what it is about?
Where do I find the update at
my player model and textures are gone
While looking through my PC after updating, i noticed some pokemon (first with a fraxure, although many are the same) don't have anything there. No sprite, no white circle with a question mark, just nothing. Its also the same with a bunch of wild pokemon
How do I download on mobile?
I just tried updating the game and a poppup like this showed up on my screen, what should i do about it?
I can't get some of the sprites to load,what cant i do?
I got the same issue
same
hey there just downloaded the game, how do i get it to use my gamepad? im on a 406v if that makes a difference
I ran this in my game folder
oop maybe it's not good to do that

i dunnooo
So I'm on a new PC and I tried downloading the game, but every time I try to run it, it only plays the audio and not the visuals.
And trying to shut the window down never works, I keep having to use task manager.
Tried reinstalling the launcher, it gives this error when I click install inside the launcher. However, this does not show up in the errorlog.txt.
I also got this error when I first tried to update to the new version as well. I didn't get the full text in this since the command prompt window is only open for less than a second, this was the best screenshot I could get. I'm no expert, but this feels like an issue with git
Trying to update the game just gave me this:
Apparently the missing sprites also applies to the fusion show. Unfortunately.
Trying to wondertrade and get this error every time and then a crash
This also happened when setting level
hey um i tried to update the game and it said it didn't update properly heres my error file
Tried updating my game but it said it wasn't updated sucessfully, my error file
nvm yall im just gonna reinstall
i don't think it'll fix it
ive seen some people here do that and it didn't work
if I play without updating the game will it do anything to my save file?
tried trading another pokemon, it worked fine, tried again with the same one from the screenshot of the error and it still crashes
iiiii don't really think so but make a copy of it just to be safe
alright, thanks man
all base sprites are missing and I already tried claering sprite cache
Fresh download of the newest update
yea the game doesnt load for me
Hey @rigid moss! Black screen in this game is the loading screen. The duration of the black screen depends on YOUR computer and YOUR internet.
- If you get the message below while opening the game, this means to stop clicking/pressing buttons on the screen as it is loading.
- If you get the message while in game, this means your computer is struggling.
- Use our performance tips to help your issues: [More Info](#tech-support message)⬅️⬅️
What is the link for 6.6 on Android? I can't find it
not out yet
Thank you so much
?tag launcher
For this newest version of Pokémon Infinite Fusion, The launcher will not work right away. It is recommended to use the lightweight installer to reinstall fresh
HOWEVER, there is a workaround fix. In the launcher, click the “Game Files” button, find the “InfiniteFusion.exe” file, and rename it to “game.exe” Video
if clearing cache is already done you just need to wait for the sprites to redownload with download data on which can take a bit
alright, thank you soo much!
how do i know if data is being downloaded/done?
it downloads as you play so as you encounter/battle/fuse you should see new fusions and such popping up (most of the time you can also tell if youve hit the cap as you’ll start seeing more autogens since it cant fetch new sprites)
Just a heads up, after updating, my random run that was supposed to have all wilds pre-fused stop having all wilds be pre-fused.
Not sure why I'm getting this error when I try to walk into one of the houses in Lavender Town... Is there a way to fix it?
[Infinite Fusion version 6.6.0]
Randomized wild Pokemon (area), Randomized trainers,
Exception: RuntimeError
Message: Script error in event 20 (coords 11,11), map 418 (Pokémon House):
Exception: NoMethodError
Message: undefined method `species' for 0:Integer
***Full script:
pokemon=pbGet(335)
echoln pokemon
sym=pokemon.species
species = GameData::Species.get(sym)
Backtrace:
(eval):3:in execute_script' 003_Interpreter.rb:137:in eval'
003_Interpreter.rb:137:in execute_script' 004_Interpreter_Commands.rb:1024:in command_355'
004_Interpreter_Commands.rb:116:in execute_command' 003_Interpreter.rb:127:in block in update'
003_Interpreter.rb:87:in loop' 003_Interpreter.rb:87:in update'
002_Scene_Map.rb:195:in block in update' 002_Scene_Map.rb:194:in loop'
Backtrace:
003_Interpreter.rb:189:in rescue in execute_script' 003_Interpreter.rb:135:in execute_script'
004_Interpreter_Commands.rb:1024:in command_355' 004_Interpreter_Commands.rb:116:in execute_command'
003_Interpreter.rb:127:in block in update' 003_Interpreter.rb:87:in loop'
003_Interpreter.rb:87:in update' 002_Scene_Map.rb:195:in block in update'
002_Scene_Map.rb:194:in loop' 002_Scene_Map.rb:194:in update'
make sure you re shuffled as updating can break randomizers
Yeah I just reshuffled
I just updated the game and now all my sprites are showing as the default generated ones. Anyone have any ideas of how to fix this?
There's a solution in the announcements
so, is there now a solution, besides a total fresh "reinstall", for the problem in the pic
The game run yesterday without issue. today I startet the game, clicked at "update" and since then the game will no longer start.
Highly regret, that I even played with the idea to do any updates at all, as it seems, that it regularly breaks the game
I followed the guide step by step and still can't play have uninstalled and reinstalled multiple times
Launcher is outdated and maybe won't be updated anymore.
You currently need to install via the lightweight launcher in #downloads
Uhh... my Infinite Splicers just disappeared?
They're not supposed to run out, right?
hello, how do i put my sprites into the game? i was hoping to test them and made sure they work
?tag importsp
To successfully import your own custom sprite, please follow these steps:
Sprite Requirements:
- Format: The sprite must be in
.pngformat. - Naming Convention: Name your sprite according to the game's dex numbering. For example, a fusion of Aegislash and Goodra should be named
329.446.png.
Importing Your Sprite:
- Ensure your sprite meets the criteria above.
- Open your game folder and navigate to
Graphics/CustomBattlers/Sprites to import. - Paste your sprite into this folder.
In-Game Instructions:
- Launch the game.
- The game will automatically detect the new sprites.
- If you have an existing sprite that you're replacing, select the option "Replace All the old sprites with the new ones" when prompted.
Once completed, you can view your custom sprite in-game from the Pokedex's Sprite tab.
?tag android
Check our Official Android guide ➡️ HERE.⬅️ If you didn't follow this guide, DELETE and UNINSTALL everything.
All Android bugs/workarounds are in the guide. If your issue isn't listed, there's no fix. No dedicated mobile version of IF will be developed in the future.
Not updated for latest ver yet iirc
Is it normal for the android version to be super laggy with joiplay
Depends on your device
Some phones have no issues, some have performance issues, etc
It loads fine just getting into battles and clicking on items and structures lags a lot
I have an older version that works just fine. Latest android version 6.5.1 just doesn't work as well for some reason
im srry :<
so.... did i just lose my entire savegame then?
with no context or anything its impossible to comment yes or no
but your save file is stored separately from the game, so its unlikely youve lost it
?tag saves
No tag saves found.
?tage save
same deal about the update
zz
ive cleared sprite cache but the sprites (only the unfused sprites) are still not workng
?tag save
Your save files and backups are in: C:\Users\YOURNAME\AppData\Roaming\InfiniteFusion
- The game folder includes a shortcut to the location above named
Savefileyou can double click. Each save corresponds to a slot (e.g., Slot A saves as File A.rxdata). - To transfer, copy the save file to the same location on the new device.
- For non-Windows devices, refer to the workaround guide for your device: [HERE](#tech-support message)
https://cdn.discordapp.com/attachments/700790080175996938/1327016763719684226/image.png?ex=6781882b&is=678036ab&hm=f10dd293ef9e2c0e6a8b1944e6a5a2e0e5539ca0fe75de7a0f948414df861b88&
Thats just the launcher not working
use the lightweight launcher in #downloads as it says
okay, just making sure it didnt affect saves
im already in the process of downloading the lightweight, was just worried of losing progress
thanks
i had to do that yesterday and i didnt do anything but my saves are still here
so u should be fine




