#archived-modding-help
1 messages · Page 415 of 1
they even say so in their HK specific page
as far as I can tell, all they did was rename the mod
would need to see a full diff to be sure
I am having a problem starting a save with the randomizer for 1.5 that DwarfWoot posted on #randomizer . When it loads the world it just show this flashes on screen sometime
nvm that's 1.5 rando
@pliant lantern the randomizer mod for 1.5 you posted on #randomizer doesn't work
Do you have the other required mods?
Try save and quitting, then opening the file again
i even reinstalled the game and removed the hollow_knight_Data before installing it again
ok, did that but now the screen shakes with this image
I mean, you definitely wouldn't have needed to do all that.
The error you're getting looks a lot like what happens when Vasi isn't installed
Try uninstalling Vasi, and installing it again
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
The game refuses to open after I activated ModInstaller2.
These are the only mods I currently have active.
The farthest I can make it is the Team Cherry logo before it crashes, and even that's rare.
are you using a controller
You most likely have ver 1.5 of the game, and used a 1.4.3.2 installer (mod installer 1 or 2)
Nvm I’m proven wrong
I am.
unplug, then launch, once you reach title screen you can plug it back in
Hm, no. The game is still absolutely refusing to launch.
punch your computer then launch again
I’m trying restarting now; that’s basically how computers punch each other, right? :p
Odd 
There's not an error that I see that should be causing you to be stuck in the ground, and this didn't happen to anyone in testing. I'm gonna test some things and get back to you in a few minutes.
ok
do you have any other controllers connected or anything
Nothing that isn't like, a mouse and keyboard and speakers.
What patch is your game on
I just installed today, so it's the latest version.
Well turns out I was right
.
You can either use a 1.5 mod installer or revert to 1.4.3.2 to use that one, instructions for both in the first pinned message
?pins
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
You are using a mod installed for 1.4.3.2. Instead of the mod installer for the current patch
I already said that
You are using a mod installed for 1.4.3.2. Instead of the mod installer for the current patch
Okay, remedying that now
Imma go back to gaming now, modding help not fun
Don't worry guys, I figured it out. I'm using a mod for 1.4.3.2 instead of 1.5
fr though thank you
Kind of a long shot, but maybe you have a bad settings file?
- Close the game,
- Download this script and run it: https://cdn.discordapp.com/attachments/879138066961424405/900956017951649822/Global_Settings_Reset.bat
- Launch the game again, and create a new Rando file
When you're on your game's Main Menu, do you see the mod list at the top-left?
This shouldn't be the issue, but for the sake of thouroughness, try replacing your copy of Satchel with this one:
Same issue
Are you sure that you're using the RandomizerMod that I posted in that channel?
yep
You, my Friend, have a special bug now dontcha?
Your copy is reporting a different version number, and that's concerning.
I double checked what I posted, and the number should be 3.13(302)
but you have 3.13(491)
i tried another one in the HK Modding discord to try
i have downloaded again the randomizer you posted but i have the same issue
Hmm.. I was hoping that was the issue 
what version of hollow knight should i be using for custom knight mod
CK is available on both 1432 and 1.5 (current patch)
So if that's the only thing you care about, then Current Patch (Scarab Installer)
And it seems when you teleport with the benchwarp mod and try to get an item it gives you the item but it does nothing. I received the Mothwing Cloak but doesn't dash
i used the current patch after the other skin was not working and the mods hud didn't even show up on the current patch
Maybe your game is bugged?
You might want to use Steam's "Verify Integrity" to make sure your install is good, and when it's done, re-open Scarab, then click "disable modding api" and then Enable modding api again
Custom Knight on 1.5 uses the Mods Menu for changing skins. It's in the Pause Menu > Options > Mods > Custom Knight
... ah
when i click disable api it just closes
Ah. That happens if it didn't make a proper copy of the assembly to begin with 
In that case, instead of Disabling API, just uninstall a mod, and install it again.
The file it doesn't find has the name Assembly-CSharp.dll.m
do i remove .m from the file name?
You can just copy and paste it, and the remove the "copy" and ".m", yeah
that should be the copy of the Modded AssemblyCSharp
Re-installing a mod should do that for you, fwiw
when you install a mod, it checks if you have the API enabled.
At least, normally it does
did that, tried again to start a randomizer and failed again XD
I want to play Hell Mod but the installer crashes before installing the mod
Here are my Activated mods
and my Installed mods
I'm genuinely out of ideas 
Granted, not a lot of people have tested the port so far, but out of the tests that have happened, no one had an issue like this, and I at least did generate a couple dozen files to see if I could re-create the issue, but to no avail.
i tried it again with the benchwarp mod and got the Desolate Dive (it work), but it seems the stag station fails to spawn the item
Yep, it should spawn the Mantis Claw but it didn't appear
Installer shouldn't crash. You can try running it as Administrator, or just manually downloading the mod:
https://drive.google.com/file/d/1nrtiAEIwSC9xcjBv5W6ZK3qdF1ykofj7/view?usp=sharing (1432 version)
And with the Desolate Dive it has given me the wrong version, because it should be the Descending Dark
In Rando, you always get the "progressively"
ah
so first one will become Dive, and second will be Dark
and any copies after that will be Geo
now the problem except the start is that the stag stations doesn't spawn the item
thanks it works now
This honestly all seems like somehow one of your mods isn't working, and I'm not sure which one.
I would still suggest that you delete your copy of Vasi and re-install it, because that's the one that would most likely be the cause of these issues. Maybe it won't fix it, but it's the most-likely culprit.
Installed Debug mod and this appears in the Pos
it goes from 0 to -120 or so
it is constantly falling and teleporting
i messed something up
ok i give up i require assistant, i got a skin and got the mod installer put the skin assets in a folder put that folder next to the default folder skin in the mods folder and when i get into hollow knight (using version 1.4.3.2 for hollow knight btw) it says its there but when i select the skin nothing happens
if it helps the moding ui looks like this
wait i might have figured it out
Post a picture of your skin install, that shows the Directory Bar at the top and the skin's images in the same picture
um w h a t
Like this:
okok
Well, I see the issue
why does everyone end in "sad"?
Lemme rephrase:
The file names cannot be changed from what they are supposed to be. For some reason all of those were changed to end in "sad" (presumeably to refer to the skin name)
well i put everything in the same folder at first and had to change the names of everything
so the "sad" needs removed from the end of them all
O H I SEE NOW
yep that fixed it thanks (:
Hey, i just set up multiworld randomizer with a friend, We joined the same room but when the game started, we cant see each other. We are supposed to be able to right?
MultiWorld has nothing to do with seeing eachother. For that you want HKMP
Ok, thought with multi world you didnt have to get that
What is the 1.4.3 version of HKMP called?
im not seeing it on modinstaller 2
It's also found in a pinned message in #modding-discussion
so after adding the mods (Custom Skin & Debug Mods), my game keep crashing
Did you use an Installer that matches your game version?
?i
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
I use scarab
Has anyone had issues with scarab causing the wayward compass to not work
Scarab itself doesn't affect anything in-game, including Compass
If your game is crashing when you launch it, make sure you don't have a controller plugged in when you start the game, then plug it in when you get to main menu
ah, could it be custom knight causing it
It depends on the issues that you're having. "not working" isn't really helpful information.
Custom Knight could reskin part of it, but it wouldn't change much other than that.
I forgot what mods shows the enemies HP
I'm new to the server and I wanted a way to figure out how to start modding the game, could someone help me out?
📌
on another note...
any ideas why debug cheats dont work ut other debug features do?
'lock' works but no other under the 'cheats' section
Anyone one what version fireb0rn's hollow knight manhunts are on? I wanted to try it out with my friends and I am not quite sure how to set it up.
multiplayer alone works best on 1.5
use hamachi for private servers
scarab to install mods
Ok thank you. I tired the mods in the google drive but they didnt work with 1.5? Maybe i installed them wrong?
use scarab to install them (first pin)
ok ill try that
how do i make enemy rando randomize physically every enemy (including things like hornet and false knight)
All of the options are in the settings.
From the main menu go to Options > Enemy Randomizer (at the bottom of the screen)
i know that but whenver i set it to max randomization it never randomizes hornet or false net or any other boss like them
Mods the in Google Drive are only for 1432 or older.
It may only do Mini Bosses and regular enemies 
It's been awhile since I used it, tbh.
The mods that fireb0rn linked in the past for SR vs H were for 1432. I think that they may have 1.5 versions now, but I'm not sure if they're publicly available at this time.
Assuming you're in 1432, then it's because you either have More Saves installed, or because of your game resolution.
Both of these issues should be fixed in the current patch version, but if you're in 1432 for stuff like Rando, then just bind the cheats that you want to keyboard buttons, as binds should still work without problem.
it keeps showing this,help
moresaves yeah
Google search that. ".net framework" with that version.
You need it installed on your computer.
it wont download,it keeps failing,i looked around and saw that i had that ver of that framework but i still cant open it
Probably just don't use that mod installer then
There's honestly not really any reason to use it
?i
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
is there any other way i can use mods?
scarab?
You were trying to use mod installer 1.
Assuming you already downpatched to 1432 before trying to use it, then you can use Mod Installer 2.
If you're on current patch, then you need to use Scarab.
i downloaded them all
If you use one that doesn't match your game version, you'll break your game, just fyi
its still workin fine so
also mod installer worked like a couple of years ago
Me and a friend are trying to play a multiplayer randomizer on current patch however despite having the same settings at the start, we get different items during the game. Does anyone have any ideas why this might be or how to fix it?
Is your seed number the same?
Yes it is
Do you both have screenshots of your settings?
I do my friend doesn't
randomiser on current patch????
Failing that you could check your Randomiser Tracker Logs to double check
We seem to be getting items at similar times but just in slightly different locations
That sounds like one of you has randomised something the other hasn't
Probably one of the items in the bottom left, or the difficulty setting.
Either way, compare your tracker logs, they should have the settings in then
where do I find the tracker logs?
?saves in your saves folder
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
thanks for that, I checked the tracker logs and we had missed turning on Mild Skips
Also, do you know if there is a setting that when one player picks up an item, all player get it?
is there a way to play multiplayer in 1.4?
Yup
thank you so much
what is the mod that allows you to go through PoP again?
qol
you probably dont have the dependencies
Also check if your patch matches your installer
1.4.3.2 version and what are dependencies
when using item and setting sync multiplayer, is your file supposed to save?
cause everytime i close the game the file disappears
can you mod hollow knight using the xbox download
Nope
is the mod folder on mac also supposed to be in the managed folder?
cause its empty for me
what does 2 monarch wings mean (using randomiser if that helps)
#randomizer is available for your future rando needs.
This means you have duplicate major items on, which adds duplicates of all the major items.
ty
Is there any mod that give radiance abs?
Check one of the pins, it has a detailed guide for custom knight related issues
oh my bad the mod menu is in options not the pause menu
Is there a way to have a map for room randomizer 3?
Hi hello. Is there a way to get the Crossover mod on Scarab?
Head to the pins in #randomizer and join the server there. You can find a mod called Tangled Map mod.
Thanks a lot
If it's not on Scarab then it's not been updated.
well then that's unfortunate. thanks for the info though
how do i fix the spritepacker error of twos sprites being modified differently
ok I have really no knowledge of computers but I followed the tutorial for TangledMapView, and its not showing up in game (which im not even sure if its supposed to happen). and also the http://localhost:7900/ is not working
it just says refused to connect
I have a problem with the hollow twitch mod, it doesn't work when I try running it and the file "twitchmod.globalsetting.json" resets when I close hollow knight so I have to type in the right information again.
halp
Where did you get your game from, what patch are you on and what installer are you using
Hi, can someone send me the link to download mods please?
it is pinned
where can i find the modding api?
Can I ask for help in the randomizer mod, me and my brother wants to play together, we set up everything correctly, with item sync and everything, the only problem we have atm is we can’t see each other in the world why?
I’m trying to see if the randomizer is the cause
Nope, even in normal I can’t see other players
?i
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
Thanks, I’ll try to figure out why I can’t see other players for now
if i install a mod, will it affect every save or i can enable/disable it somewhere
and how can i backup my save
if u install a mod it will affect every save, and you can disable it in the mod installer ur using
if u delete a save, cant back it up
i mean can i copy my not modded save to any folder and delete from files
bro literally disable any mods and ur good
uh ok
sup guys, i need enemy randomizer mod for 1.5, where can i find it?
fyi i am using Scarab
It will only affect saves you actually open
It isn't available for 1.5
oh
thanks
but can i disable completely the mod installer so i get a normal vanilla game? or just disable every mod i got
Is there a known fix for multiplayer where you can’t see your friend?
Are both of you in the same version of the game ?
Also check the pinned comment for the basic info regarding those mods
If you're on scarab there's a button on the bottom left of scarab that says "disable api"
You can click that to play vanilla
Yes, we are using the item+room randomizer and connected by Hamachi, we do get the items together, it’s just that we can’t see each other
Oh like in game
Yes
Hum well that might just be like, either not a function of the mods to be able to see each other (I think it does but I’m not sure) or it could be somewhere in the option menu of the mod
But like, if everything else is working
I used both HKMP and the client/server mods to test both doesn’t work
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
modlog.txt is in the save files directory
Just a sec
👍
I can’t find a modlog
you went to the %APPDATA%\..\LocalLow\Team Cherry\Hollow Knight\ directory? (Or whatever if not on windows)
Yes - it would be helpful
That's an older modlog. You want one simply named "modlog" that isn't in a subfolder
Also, it looks like you got that from the Old Modlogs folder, there should be a modlog.txt in the previous folder
Hmm
so you were both in King's Pass, in the same server and port, and didn't see each other?
did you also connect with hkmp?
Yes
We do that, with hamachi
and if you're using hamachi, one of you needs to have the server.exe running
What’s that?
hamachi just puts you on the same network, it doesn't connect you to each other in game
Okay, so that’s the problem then
you have to have a server running, and then connect to that server ip in-game
yeah, the problem is you didn't connect
How do I get the server.exe
Multiplayer Procedure (HKMP) [Recommended MP Mod]
#archived-modding-help message
Thanks
so I did everything and in the server.exe it tells me he connected, but I can't?, but even so, I hosted, I joined, I tried to do other things, but it is the same, we cant see each other
i have a question, im new to modding for hollow knight and i was wondering which installer as of now should i get and what version of the game should i have, to use it?
for the current patch you should use scarab, for the old one, the mod installer
is there a randomizer for 1.5?
Yes
uhh so how can i install it?
oh thanks i found how to do it
so i just downloaded some custom knight skins for testing and when i enter the game the custom knight mod got smth like this "Failed to initialize! Check ModLog.txt"
Are you using Scarab or Mod Installer?
scarab
You need Satchel
A mod
oh i see
do i need SFCore cause it seems like its another library
and i got it automaticaly
I don't believe it's required for Custom Knight, but there's no reason to get rid of it
Does someone maybe know if mods are capable of preventing the game from toggling on/off Full Screen in options? For some reason I can't interact with it in any way, and someone suggested it might be related to having mods installed
alt + enter
i tried downloading this on my mac, and upon launching it immediately closes, is there any reason or fix for this-?
oh thank you
i can't load my save files when i open modded hollow knight, is there any solution?
thank you
um.... i'm brand new to this
i just install scarab?
Pretty much
it works like the old mod installer?
Pretty much
nice!
https://github.com/RedFrog6002/FrogCore/releases/download/0.0.1.0/FrogCore.dll
try using this frogcore. replace the one that's in your mods folder
okay thanks
so i just uninstall the other frogcore right?
like the one in my mods folder and dont use it anymore
Yes
okay ty :)
i think it still doest work
btw whats the difference between the frogcore that automatically installs when installing uuwuu and this one?
ooh
makes sense
it still isnt working, guess it could be something wrong with my pc but dw anymore
uhh so guys i installed randomizer for 1.5 and when i create a save file with it it just becomes black
I have 4 installations of HK, is there a way to have the save files for each version in different folders in a way that I don't have to manually switch them out every time I want to use a different version?
no
screenshot your mods folder
ok
damn
oke thank
i may just be dumb and not seeing it but is there a way to warp to last death location with benchwarp or debug mod?
no
10 minutes of walking it is
you can always turn on invincibility and noclip
You can place a bench
you cannot retroactively warp tho
this is my mods folder
bro screenshot
heya, so my mods used to work last time I played the game but they aren't anymore, I am not very experienced with these kind of things
still everything in the folder where it's supposed to be
what patch is your game. what installer are you using
what mods did you install
need some context
"one time mods worked, but now they don't" isn't enough to go off of
patch shown is 1.4.3.2, no idea where I can find my installer, but I installed Mods like benchwarp, Custom knight, QoL, More saves, infinite notches, and show hitboxes
and this is what i have in the randomizer file
try that
so what is happening should i just reinstall randomizer or just add something to the file?
¯_(ツ)_/¯
it's had very very limited testing. and someone else yesterday couldn't get it to run either.
probably just not working right now
ok
any reason as to why modinstaller won't start installing? kickstarting it does nothing. #downloaded from nexus mods #ver 9-8-7
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
ah, i see. thanks.
Hi, this is the first time when im trying to download some mods. I did it according to the plan, but after clicking disable something like that appears. I'm from Poland so this screenshot says that ,,part of the path could not be found". I have no idea what i can do now.
click uninstall
i did it but nothing change, it appears on every mod
make sure game is closed, close installer, move installer to desktop, run as admin
and you're connected to the internet on this pc right?
hey
i want to try to reassign where the mods get installed to because i have two different hk versions on my computer (1.4.3.2 and 1.5) and was wondering how you would do that with modinstalller1 or 2
modinstaller 1 does not want to open correctly and modinstaller 2 does not have a button for it
@real jacinth i did it and it worked so thank you 🙂
reset mod installer 2
is that just a reinstall or how do?
?pins
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
thank you
is there any way to add mods to scarab that aren't on the scarab installer?
"add to Scarab" 
"Add to game" 
That's why there's the "open mods folder" button.
Note: most mods compatible with current patch are already on Scarab.
how would i do this, ive been having trouble getting the randomiser working
alrighty
done this and it's not working :/
is there anything else I need to know
oh wait
I may need to play on 1.4
I'm trying to load up a randomizer mod and when I load up the game, it always says that the mod failed to load up in the top left, what should I do?
Enable qol and vasi
k
And modcommon and serecore
yk now it makes sense that those downloaded as well when I installed it
hello, I succesfully installed Scarab on OsX (MacBook Pro) - but when I start HK with mods, the game can not read my xBox controller anymore (without Scarab it works fine). Any advices? Thanks! 🙂
how do i install the mod that makes the knight wield a gun
ok i installed the mod but now every time i try to start the game it crashes
how do I install hollow point mod
what launcher you have?
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
how do i switch skins on customknight?
Pause > options > mods
and is there a certain file format i need to import the skins as
Yes
its as a .zip is that good
You need to extract it
ohhhhh okay thanks
Check the pins for common HK problems
.
click on custom knight
done
use menu to change to skin
hi mick, im tired

Anyone else having issues with scarab mod installer, specifically custom knight? It stopped working for me out of no where and I've already tried several things but it's still unresponsive.
I uninstalled the mods from %appdata% and re-pathed it manually after installing to see if it'll make a difference. But that's the only mod that's unresponsive even after the multiple resets of both scarab and the game itself.
what does it mean to be unresponsive / stopped working
it displays as running in the game in the top left but I can't toggle any of it's settings in-game.
#archived-modding-help message do this but just with customknight
Thank you, that fixed the issue for me!
can anyone help me with the quick heal glitch that the hollow point mod insues
?pins look for how to fix soul after using hollow point
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
thank you
thanks :D
hey I just started playing with the debug mod for speedrun practice and I can't see my hp, soul, or geo now. Anyone know why?
Backspace
can i use mods for hollow knight xbox version?
No
does scarab have a randomizer mod in it?
oh alright thx
in order to use the 1.4.3.2 modinstaller what beta do I have to switch to? on steam
1.4.3.2
:P
I tried 1.5 and I think I installed too many mods
anyways, I wanted the randomizer
I installed some mods via Scarab and now my controller doesn't work
to be clear, it was working before. could this be a specific mod causing this?
Are you on Mac?
Or Windows?
Or other?
Linux
For whatever reason, the Unix build of modding API that Scarab uses is borked. You'll need to manually install it, but this one should work:
https://cdn.discordapp.com/attachments/880463689176731648/917836286608441374/OutputFinal.zip
To install it, just open up the part in that download that should be a folder with like 10 files (including AssemblyCsharp), and copy and paste those into your Managed Folder inside the hollow knight install.
Linux path should be:
~/.local/share/Steam/steamapps/common/Hollow Knight/hollow_knight_Data/Managed/```
omg this is great
Note: This version of the Modding API is known to work on MacOS specifically. It should work for any Unix system though.
just joined but anyone know what the mod is called to get all the charms and infinite soul and such, using mod installer with the zote icon
Debug
Hopefully you downpatched before using that installer
wym
Zote Installer (ModInstaller 1) doesn't work on current patch
oh yeah i did that
If you already using mods then you're good
If there is no /Managed directory should I create it?
You should have one
Because that's where your game itself is
like, you're replacing files, not "adding" files
so that files are already there, you just need to replace them
I have /StreamingAssets, but no /Managed
Screenshot where you're looking
You should definitely have the Managed folder in that folder
oh okay weird I found it
If you didn't have it, your game wouldn't start 
just wasn't showing up and I even had hidden files turned on
will this affect my current Scarab configuration?
Nope
sweet, let me try it out
Like, it won't mess anything up
Scarab should treat it like the Modding API that it installed
If you want, you can make a copy of the a AssemblyCsharp.dll and name it AssemblyCsharp.dll.m , which should prevent Scarab from ever mixing them up
I still can't use my controller 😦

it has something to do with mods, on vanilla my controller works perfectly fine
native and steam config
so, for the mod installer, is there a way to change the language?
worded that wrong
joy2key
The installer itself doesn't have a method, but some people have re-built it in other languages.
give me a sec
Linux
antimicro?
Yeah, the ModdingAPI affects controllers specifically.
The build of ModdingAPI that Scarab uses for whatever reason only supports controllers on Windows, despite it using Unix builds.
The one that I linked you works for MacOS, and I was hoping it would work on any Unix system, but apparently not.
RIP
At this point, you either need to use an external controller re-bind program of your choice (which is what Zaliant is suggesting), or you would need to build ModdingAPI on your system, which if you're not already familiar with, might be a bit technical to do.
lol yeah I'm not exactly a Linux expert just yet
any place to get rips of audio files from the game?
All audio files in 1432:
https://drive.google.com/drive/folders/1w8FlFOtTgJR3JR_-CUjsteWwU8yzHl68
tyty
is there a way to change this language?
remove art mod
got it
Is there any mod that darkens all of the godhome boss backgrounds so its easier to see the attacks?
there's a mod that darkens some backgrounds, dunno if it does it to godhome
all good, thx
is there a list of mods somewhere?
blind radiance, and apparently it is customizable where it does it
is there a way to do a randomiser on steal soul mode
no
aww
thought that would have been an interesting challange
would save editing work?
I mean, you could always just delete your file when you die
tru
ima try save editing, are the save data for more saves mod in the save location as the normal save data
You can use MoreSaves to do the save editing itself
wait really?
Start the file, save and quit to Main Menu, then in the Main Menu > Options > Mods > MoreSaves then "Edit save" and select the file that you created.
Right, I forgot that it wasn't in 1432 MoreSaves

MoreSaves for current patch can save edit
now, it is my b
Oof ok
O.o?
Did you not restart your game after doing stuff before?
And/or did you re-connect your controller after starting the game or something?
I did, I had to turn off steam controller config and turn on native controller
unrelated but see my username?, guesss which 1% i am missing for 112% steal heart
Glad it's working 
Missing a mod required for it to work
Required for rando
Modcommon
Serecore
Vasi
Qol
hey um this is on my screen and i cant get it off
not using rando
What mods are on, also can you screenshot the full screen?
I also have a mod from Nexus installed that changes charm values
that's the mod console mod
Can you screenshot the whole screen too
do i turn it off?
can be toggled using f9
i dont have the f1-12
Am I right in saying t hat ModInstaller doesnt work for 1.5 yet?
Prob because you’re missing satchel for CustomKnight
Also scarab is a mod installer btw
is satchel a mod?
Yes
also what mod do i look for if i want the mod arando thing that skurry and fireb0rn use??
am I also right in saying that this is why when I tried ModInstaller on my game it can't detect the path and says the folder of my game is invalid?
Where are the global settings files?
Could you link a video to this
yea
The Hollow Knight Randomizer just keeps getting more cursed.
follow the stream: https://twitch.tv/skurrypls
full vod: https://www.youtube.com/watch?v=O_vI7E6lkfs
mod installer: https://radiance.host/mods/ModInstaller.exe
you can find the beta build of randomizer I used for this in the hksr discord: https://discord.gg/qsEyeSzCwn
thanks for cur...
Maybe, either way you should either way check your hk version
Oh so arando was a type
?saves
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
Save files path
Is there any way to play a Randomizer on Scarab?
no
Not yet
sadness
In development
k game is working now. I have been having an issue with controller rumble but it has nothing to do with modding (happens on vanilla as well). anyone know a quick fix for that?
ty guys for helping
Why is the MantisGods mod not working for my game
is there like a core mod or lib mod that I need to install first?
even though I already have all the core mods that are listed in Scarab installed
Prob Vasi
Already have it
Also what game mode are you in
also, probably doesn't work in godseeker saves
I'm in normal save
Alright
Could you try sending modlog.txt located in your save files path after trying again (make sure to have the qol mod installed so it logs every error)
here's all the ones I have installed
try both mantis lords and sisters of battle
already did, nada
Where is Blind Radiance's config file?
Probably globalsettings
are you in godseeker mode
If not, probably isn’t
no. in normal save
It isn't there.
i had another person who had this problem and they couldnt get it to work on 1.5 either, had to downpatch to 1.4
Prob doesn’t have one
it says it's there on the github
Ho-How...
Smh 56 fix your mods
?saves
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
if I downpatch to 1.4, would all my saves be deleted?
No
ok phew
Blind radiance installed
I'll downgrade to 1.4 so I can play with other mods
I hate discord
What I meant to say: have you opened the game with blind radiance installed @narrow pollen
Yes. I have the game open right now.
where do i download the modding API for 1.5 hollow knight
?pins
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
Scarab, the 1.5 mod installer automatically gets it
ok ik this isn't technically modding, but what's the actual difference between 1.4 and 1,5?
not a lot
#hk-announcements has the patch notes
Didn't work, still aint there.
1.5 is added bugs and bug fixes, most changes are with the more backend development stuff users don’t see
can you screenshot your saves folder
my laptop can't handle channels with that many embeds 
Wow I’m 🐌
no i mean like just the modding api itself,scarab or any mod installers isnt workin right for me rn so i decided to just download modding api as a temporary solution
i knew you were gonna ask for that next so i just asked for you lol
My laptop can’t handle discord
Did you purchase the game
yeah
Can you screenshot the main menu of hk
Could you tell exactly what’s wrong with the installers?
Like where they stop working
unable to open and the 00000 thing
windows
Can you screenshot this
what?
Screenshot the error
ok wait
Hmm I’m not sure what’s wrong, I gtg now. Good luck with everyone getting their problems solved
ohhh i think i know the problem
I’ll be back in ~30 mins - an hour
for the mod installer
what exactly is your issue?
how do i downpatch cause i have 1.5 and mod installer is for 1.4,idk whats wrong with scarab doe
Blind rad globalsettings not gening
?pins first pinned message
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
Now I gtg
Blind Radiance's config file wont appear.
If it's Scarab (current patch), then you just click "change install path" on the bottom left.
If it's the other installers (for 1432), then you can use this script to reset them:
https://cdn.discordapp.com/attachments/879138066961424405/890824593848299550/HKModInstaller_Reset.bat
thank you so much
is charm overhaul compatible with 1.5, or is that a no?
no
darn. Thanks
?mods
Mods
Google Drive with Mods - https://drive.google.com/drive/u/0/folders/1lnjtSYMfRe1LyA_qSq2CoXKI6NRm_I-e
1.4 Installer - https://radiance.host/mods/ModInstaller.exe
1.5 installer - https://github.com/fifty-six/Scarab/releases/latest
Mod Summaries - https://docs.google.com/document/d/1cz5tcggpGofrBcM90XyTkMWjMelDHzugvQM6HpB13Ew
Did you use the correct installer for the patch that you're on?
hi
after going into teh Hollow Knight Folder
i got it on steam
where do I go to see my saves
_ _
?saves
Saves
Windows File Paths: (Assumes Default Steam Install Path, Adjust accordingly for DRM Free or Non-Standard Steam Path)
Game Files: C:\Program Files (x86)\Steam\steamapps\common\Hollow Knight\``` ** ** Mac File Paths: ```Save Files: ~/Library/Application Support/unity.Team Cherry.Hollow Knight/ Game Files: ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/``` ** ** Linux File Paths: ```Save Files: ~/.config/unity3d/Team Cherry/Hollow Knight/ Game Files: ~/.local/share/Steam/steamapps/common/Hollow Knight/```
user<save slot>.dat
does your game on steam say Hollow Knight or Hollow Knight[1.4.3.2]
how do you fix the "this sprite has modified differently" thing in Spritepacker?
how do i use daughter of hallownest skin?
same as all the others, except the images are hidden a few folders deep in the zip
it also modifies other things I think, but if you just want to use the skin then do that
Link to simplified skin for it:
#archived-modding-help message
help,i can't pack my skin in spritepacker
i dont know how to use a skin, this is my first time using mods / texture
?pins
Check the pinned messages for more information - https://cdn.discordapp.com/attachments/187137504393035776/823796522751623168/unknown.png
I have a question, to use the cooperative mod and multiplayer, I have to use version 1.4.3.2?
wayward compass is stuck in one spot?
no
i dont think multiworld is pushed to 1.5 yet so kinda
I ask, because I look for it in scarab and I can't find it.
hkmp
it's like it's own branch of it from how i interpreate it
multiworld is also not on the installer
gives you errors that it's missing it's version of randomizer
what are some mods that doesnt require modding api
none
Does anyone know the name of the mod to use all the charms, or do you know how to do it?
wdym "use all the charms"
i mean the amulets
yes
what do you mean by "use all the charms"
do you mean you want to be able to equip all of them at once?
yes
infinite notches mod

Will anything break if I use the same save files for 1.5.x.x and 1.4.3.2?
No
install vasi
is it enabled
yes
screenshot your title screen, installer, and mods folder
thats a lot to screenshot
Are you able to make it so that both players are linked to one world? Like synchronizing it?
wdym
Or is that not a thing
like enemy and boss sync? no
Like if I played multiplayer with a friend would it be possible to have a friend with me and they can see
oh ok
then can see you in multiplayer, yes
but the enemies they have and what you have are your own
I installed the Hollow Knight DRPC and the game is telling me "Hollow Knight Discord RPC: FAILED TO LOAD! Check ModLog.txt." I'm on a Mac on version 1.4.3.2, any ideas?
missing a dependency
not sure what that means
a mod it needs to run
huh, ok
should have auto installed by the installer
what do I need to install
did you disable anything
I... don't think so. It's installed and enabled on ModInstaller2
or wait i guess its just called modinstaller idk
dont think so
install modcommon for sure
it's on the installer
kk
it's a mod that makes others run
Alr, back with the images, cant get one full one for modinstaller
?
dont have weavercore
go to your saves location and delete anything that has globalsettings in the name
Kk
QoL is second from the bottom in that title screenshot
oh wait... i didnt even notice
so clear the global settings files and/or restart your game
Iirc mapi displays mods twice when they fail to load in most cases 🥴
@real jacinth I have modcommons
but I don't have weavercore
do you think it could be a different problem?
or should I get weavercore
That mod requires extra set in 1432
?
gotcha, what do I need to do
Your structure is a little different because mac, but it's the same idea:
Drag the Plugins folder into
\Hollow Knight\hollow_knight_Dataand it should be done
https://cdn.discordapp.com/attachments/838633964759547935/850800602538704936/Plugins.zip
If you right-click on your hollow_knight.app, and select "show contents" then you'll find that data folder
~/Library/Application Support/Steam/steamapps/common/Hollow Knight/hollow_knight.app/```
Right-click hollow_knight.app, and select "show contents", then navigate to: `contents` ᐅ `resources` ᐅ `data`
That should be the right spot
Did you go to it the way I showed above?
yep
The Unix versions have multiple folders with the same names
if you skip a folder, it won't be right
Yes and they're both wrong lol
_ _
Don't use "search"
you need to go to that directory
you can copy and paste it into Terminal
it should be "hollow_knight.app"
will it appear in my finder or did it just finish the job
with the underscore
really quickly sorry
i copied that and pasted it into terminal
what did that do
sorry if im an idiot lol im just trying to understand the process
That alone was nothing apparently. sorry, I forget how the MacOS stuff works sometimes-- more specifically the terminology it uses
do:
open ~/Library/Application Support/Steam/steamapps/common/Hollow Knight/```
Wait... that might open hollow knight itself
okay, edited
ya i was gonna say
that should work lol
The files /Users/(my name)/Library/Application, /Users/(my name)/Support/Steam/steamapps/common/Hollow, and /Users/(my name)/Knight do not exist.
open ~/Library/Application\ Support/Steam/steamapps/common/Hollow\ Knight/```
I think it thinks Hollow and Knight are two different things
Yeah
with the slash at the end?
I forgot the slashes
the one I just posted should definitely work
If it doesn't ||I'm going to pet my cat and contemplate why it didn't||
Excellent. ||Sorry Oliver
, no pets today.||
Right-click hollow_knight.app, and select "show contents", then navigate to: contents ᐅ resources ᐅ data
Then copy and paste the contents of this .zip there:
https://cdn.discordapp.com/attachments/838633964759547935/850800602538704936/Plugins.zip
is that the same zip as before?
yes
my map is really fucky, most of the time it shows me in a spot that I am not in
so drag it from finder to there?
after you double-click it, it should create an unzipped version
You need to make sure its the files from the unzipped version
but yes
double click it and then drag it?
Yeah, drag the "plugins" folder that you get
ok its in there rather slopily
lol, it should be fine however it's there
as long as it's not in the .zip anymore
probably
so if i close that and open the app it should work?
What mods are you using?
It should, yeah
Whelp, If that doesn't work, then I'm not sure tbh. I'm not sure if @honest flax had much MacOS testing, and the readme only really covers Windows
gotcha. Should I try pinging the guy who made it?
I just did 
Fwiw, this is the normal instructions:
https://kaangaming.github.io/HollowKnightDRPC/guide/Guide.html
What I linked you to download is just skipping the hand-typing-out the URL from the images, and going to download them and put them in a folder.
I'm not sure how Kaan has it check. It might need a "fake" hollow_knight_Data folder? That would be really silly though, and the layout is different for GOG, so I definitely don't think that that's the problem
Hey just wondering, is there a way to get the custom hollow knight skins mod for mac or is it windows only?
Essentially all mods on the installers are for all Operating systems
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
Just install Custom Knight using the installer for the patch you're on (Scarab is for the current patch of the game), and then add skins to it. Instructions on how to add skins are in the pins 
How do I do that?
I've installed the file
but what do I do with it once installed?
will do
I am confused
I don't understand how to proceed
thanks currently watching the video
but it doesn't work?
my hollow knight is version 1.5.78
this is for older versions no?
how do I use the scarab one?
?i
Mod Installers
For up-to-date info, check the pins!:small_blue_diamond:Scarab (1.5 Mod Installer)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 2 (1.4.3.2)
Windows | MacOS | Linux:
#archived-modding-help message:small_blue_diamond:Mod Installer 1 (1.4.3.2)
Windows:
https://radiance.host/mods/ModInstaller.exe
I can't open scarab because it says the developer can't be verified, is there a way around that
should be a way to hit more info > run anyway if youre on windows
I have what I'd like but how do I install custom skins beyond the installer?
its explained in the video
yes
how do you fix the "this sprite has modified differently" thing
if this is in spritepacker this doesnt have to do with modding help
either #modding-discussion or #art-discussion
ok
my controller is working when I play modded hollowknight, is there a fix for that?
*isn't
scrath that it works there's just no game audio
is there a way i can like make all my charm notch cost be like 0?(is there a mod for that)
can someone link me the skin file for the christmas skin by magegi please
There's an Infinite Notches mod. IIRC it permanently edits your save to work.
If you want to change that actual costs, you would need to manually save edit.
how do i save edit?
using more saves?
There's various methods of Save Editing listed in the pins until the "Fix Soul after Hollow Point" pin
In 1.5, yeah you can use MoreSaves from the main menu to do it
otherwise, you can use QoL and edit the .json that it generates for each file, or use a website for it
That depends on you? They're all about the same "easyness". It's just however you prefer to do stuff
so my mods arent working on patch 1.4.3.2
hmm ok so i will try out the infinite notches mod and the more saves maybe the QoL
and i dont know whats going on because thye did work and now suddenly they dont
and one more thing can i get kingsoul and void heart at the same time?
(that would be cursed)
#emoji fail lol
Emoji failure :sob
emoji fail #2! lol
ah ok
thanks
One of your GlobalSettings files probably donked up
Close game,
download and run this script: https://cdn.discordapp.com/attachments/879138066961424405/900956017951649822/Global_Settings_Reset.bat
when it's done, re-open game
You download Scarab by clicking the link to it in pins and then downloading the version for your operating system,
extract the .zip,
move the folder you extracted to your desktop,
open that folder,
run "scarab.exe" (or .app if mac)

