#🔧│keyboard_modding
1 messages · Page 734 of 1
How big is your mailbox

Hella plates, yo
Those archetypes perfect for copper
Sheesh
Did you get another Derivative?
is that like an NSA novelty trading card or something 
Oo, Sparks. Are you going to try them today?
Gateron sparks might be the most depressing thing to get post vacation 
Everything else he got balances it out
Cant win it all in this life 
idk why on 80HE alu and FR4 sounds almost identical, but on venom its radically different sounding to me
maybe boronto keyboardman one isnt good, but its just so weird
maybe its the silicone gasket telling me to get rekt idk
Yeah a red one. Last one for sure!
Yeah I might. If not tonight then this week
I think it's for one of the artisans. They were a bonus and haven't even looked at em yet.
Neat nonetheless, where do you get your artisans from?
They are some of the hand painted ones he did back in the day. Been on my collectors list for a while but probably won't go on the GMK copper board I've got since I have a solid cap on it already.
That's what they all say
It's always the last one for sure
cam pulling the cap card oh my
Ah fair enough. Nice pick ups. Enjoy!
Well last until I sell a few boards lol
All over. Keyboard marketplace, artisan marketplace, rl friends, keeb meetups, etc
cant be forgetting keycap quarry 
I did say rl friends
Fair
Gn
hi, has anyone removed the sandwhich pad and gasket mount from their wooting80?
You can't use the board without it installed
ahh ok ok ty ty
thought you would be able to, doing a case swap to a Holy80 so I thought you'd be able to get away with it
Yeah, its required for the board to function properly. They sell foam versions on Aliexpress, but never used them myself, so not sure how well they work
cool, thanks for the info!
You do not need the silicon pad on the holy80 specifically because that one used a different mounting style
Any other case or situation you have to use it pretty much
gotcha, so am I good to remove the silcone pad then?
Ah knight v4 spare set has arrived
Surely V5 is worth a cop 
naw v6 better
no idea what delta is doing, but yes these are different from v3 according to swagkey site
Holy jumpscare
this man got some repost bot or something lol
I feel like I got visually assaulted
😭
😭
oh sander is sending me his sparks to try out, so i guess i don't have to order any
he said he didn't like them lol
@tawdry tree wait i actually like the Astros in that ST 👀
surely raptors will sound like that too
according to swagkey this is what changed. ferrule is iron I'm fairly sure lol
25.07.03 Renewal Improvements
• Increased pitch by using PC material
• Shortened ferrule length and applied R value to tip to resolve contact with the board in certain environments
• Changed hinge shape to minimize clearance between ferrule core and housing
• Minimized clearance between ferrule and ferrule core
• Increased metal precision to improve cross-sectional quality
V4 Changes:
New Molds due to the older molds ageing
More compatible with full travel switches due to trimming the stem length
Stem "claw" changed to prevent bottom-out under certain conditions
Change material from nylon to PC for a higher pitch
Damn I was too slow
at least yours wasn't bastardised by chatgpt
anybody care to explain to me about the need for ventilation holes at the bottom of a switch? just curious, because ive seen closed bottom switches with and without
it's debatable effectiveness, but the idea is that heat really does affect accuracy of HE sensors
so the holes help ventilation, although whether they do anything who knows
gotcha! thanks for explaining. i guess it makes sense if you think about it. i wonder if someone in the future would do a deep dive into it 🤔
another jump scare is necessary I’m afraid.
just marketing
what were the results of the 96hour flux test again?
literally 0 difference after the 96 hours
or very close to 0
1. ||Sound test|| Gateron Jade Pro sound test.
2. ||Sound test|| Gateron Spark sound test.
3. ||Sound test|| Greetech Unionwell Polar Pro sound test.
4. ||Sound test|| BSUN MMD C1 sound test.
5. ||Sound test|| Outemu Akko AstroAim sound test.
6. ||Sound test|| Outemu Akko Flash sound test.
7. ||Sound test|| Hejin Owlab Ti HE sound test.
8. ||Sound test|| Hejin URStudio Ice Max sound test.
9. ||Sound test|| Hejin URStudio Ice Ultra sound test.
10. ||Sound test|| Hejin Phylina Lightning sound test.
11. ||Sound test|| Hejin Phylina Pink Lightning Pro sound test.
Config:
- Raven61 PCBA with an aluminium plate, tray-mounted in the RT60 case, fitted with Aifei Double Shot ABS keycaps.
Sound tests by: https://youtube.com/@kosio_device/https://x.com/kosio_ooo.
discord doesn’t like that sadly
Why did you post it again 💀
AstroAim goes hard
Outemu/Yiqian is slept on icl
more than decent sound and good stability
and they actually do unique stuff
like silent, clicky and tactile

it's probably a lot of side effect from their early switches being awful magnet ranges that had issues with bunch of boards
so people don't really look at their stuff as much now
yeah, their earlier switches had smaller magnets so they didn’t work but now even those work fine
with the 80HE at least
It's fine, last vid is a sound test of a recolor
not wrong
why is your bot censoring sound test btw
people arent ready to hear the last one
I added it for discord search

aligner about to find out no one uses discord search
theres atleast 3
the fun of discord search is the only people who use discord search are the people who don't ask for things that need discord search
Won't be hard soon 🥶
reminds me i need to check if dhl returned the package yet lol
i'm still annoyed the guy invented some rules that you can't import 2 keyboards at once
that has to be a mistake
cba listening what is the thockiest creamiest switch🗣️🐦🔥
That doesn't make any sense lol
right? I'm almost certain the dhl guy just doesn't know how to classify computer gear properly, threw them in as radio equipment and said 'sorry you can't import 2'
Discord search is only useful for
like me
then they offered to split the shipment for me and return one keyboard but charge me $100 lol
how louds raptor v2 compare to raw, jade pro, or owlab ti?
It is definetly weird
raws are quieter, the rest about the same but different pitches/tones slightly
thank you sir
I require rappers v2 at once
reviewers have said it reminds them of the jade pros, so should be interesting
are you doing a new build mr boshiba or just thinking of trying out rapters
I think dhl issue is 100% tied to one sorting centre
i think the jade pro thing is more that almost every switch falls in the realm of 'jade pro' when it comes to typical closed bottom 3.4-3.5mm switches lol
setting up salvation for rawhuk, thinking about raptor v2 on tofu v2, already placed order.
thats why i asked about loudness, tofu v2 is a bit muted compare to my salv or leggera
i remember raptor v2 is on the deeper sounding side, so may work well with tofu v2 on alu plate
yeah I think all switches that are closed bottom and use the standard materials are gonna sound similar, but it's nice that rapters are ever so slightly better on tolerances and cleanliness
rapters with alu might be an elite combo hehe
esp on a softer mount

Gateron Sparks and AstroAim sound similar to me in these sound tests
I’m need help, with getting my keyboard next day delivery or same day delivery, because I don’t want to wait 2-6 days
Stop crossposting
You won't get it in a day, this is not Amazon
I’ll pay extra $100 for same day delivery
Or put ur keyboard on amazon so I can get same day delivery
💀
Waiting is for broke people

bruh
I think Mark’s personal 1 day shipping service was $150k iirc
it was too tuff for my mom's credit card, so I had to wait 4 days like a complete loser
Okay
I’d rather buy a porsche
iirc you can also get Calder to do it but his quoted rate was higher
Can’t buy no shii no more even the $150k offer has gone up
shouldve done this sooner
i want to go abs only, just because it feels less slippery on my finga
my oldest set gmk wob is grippy af on wasd
like its rubber
150k € by land
So technicly anywhere in world excluding islands
hmm. is it considered semi-open bottom like the raws if it does have a hole? and what is the effect with sound since theres a hole
Does the north facing led on HE switches have interference with cherry profile keycaps?
there are little holes on ttc for example, but they dont do much, so raws are quite unique with their semi-closed bottom
No
Na they just have redesigned top housing to account for it
A lot of modern MX switches are the same
me like, it's like a super fast game of mahjong
i finally understand what salv needs, a clean sounding switch, no raw or rawhuk, with their own weird bottom out.
rapters
tohkc
Just wait for tikkens 
Does every wooting pcb still use the water resistance coating?
yes
huh
then wooting it is for my salvation
i wanna bring my keyboard to the shower 
Fortnite on shower
(jk)
Wooting PCBs have water resistant coating since early 2023
i never noticed that
It's not waterproof so, good luck 
i know
smh not soda proof like GT60
only water resistance (spill proof, and such)
60he v2 needs the soda proof
i wanna give my keyboard some coke
so it can chill
or just you know... dont get tooo drunk in front of your keyboard
i will try my best
dont ask me why so specific
joshiba experienced it

came close... but multiple times i spill shit when i get too drunk
venom spill proof also?

iirc, Geon said he might use some coating for the rgb ver.
nah it just got on the deskmat not on the keeb
ahh, i was expecting something different
coating gud, maybe not for actually spilling water but just in general less likely to damage the pcb
yeah, so it won't rust and full of molds
Soda in theory would be alright as long as it's 0 sugar
It's the sugar that corrodes
BSUNs too, and it’s their first magnetic switch so pretty impressive.
technically, yeah. it doesn’t have a significant effect on sound though, from my experience.
gotcha, i just wouldnt want to downgrade sound-wise from my owlabs, love how they sound
ah yes thats right, the little 2 holes. i heard about lube leakage though, have you had any experience with that? hopefully the raptors dont have the same
I remember having that with lekkers
not with TTC POMs though cause I lubed them myself and made sure there is no lube ending up at the bottom
with raws I think it also shouldn't be the case cause the stem contacts the bottom only on the edges
i love that by the time something new releases, i can always count on this channel to have already tried modding it before the general public receives it haha. thanks again arc!
thoughts on wooting knob
thoughts on the year 2026
heummmm,
it will be hard if US keeps on making things
I have Astrolinks and if Raptors truly are Astros without the scratch and friction, it wouldn’t be a downgrade but more like a side grade. The sound profiles of both are significantly different.
@tawdry tree what boards do u have
If lube accumulates in the bottom of the pole guide (the little circular hole), you have bigger issues than leakage.
80HE
Venom HE TKL
HM66
Slice75 HE
Raven 68
i want that
Battle68
how is it
A bit outdated now but still nice

First HE board with split space 🥰
don't answer it
it's a baited question
it's 64 with split spacebar support right?
ye
I’m from the EU
mandatory 2-year warranty
🔥
updating older products is something only woot does though
really old products*
oh yeah that
knob support
also
i will sell my benom for 60he v2
can't wait to be back with wooting as my travel board
6 months of benom is enough for me (praying too much so it won't die)
you’ll have to sell 2 venoms to cover the 60he v2 
i have budget for it
don't worry
and i have a lot of gh60 case...
so i might buy the module only
and tikken
but all depends on the stock case price tho
if it's <$240 i might buy prebuilt
but i will lose the 7u
no 7u but u will have RGB 🥰
venom announced rgb as well right?
ye
I don't want to pay multiple import tax if the pcb die
i have to buy again = extra shipping and extra tax

Having Slice75 and not 60HE v2 is criminal
slice aces build quality
maybe 60he v2 as well but we’ll see
there is no way they make a profit on the slices btw
impossible
Ball catch case is nice
bro whole CNCed case
Ribbon cable in big 2026 is not nice though
the gt-80 is the same proce as a slice 😭
they include an extra one 😼
ur friend
but i don't want a keyboard that has no warranty and die in my hands
Slice is $200 now
ye, here tax is included in that
gt-80 costs the same
a little more with shipping I think
eh no
a little less
but still
hell nah
i have many 60% mech
and sell/return the one you don’t like
oh good idea
mech is old tech
bro is becoming optimum
Based opinion
I don’t have a mil subs, so can’t ragebait as hard
i have neo 60cu and upcoming capybara

what if venom becomes $100 but have warranty 
but still
no guarantee for long updates like wooting
venom not having warranty is idiotic
ye
there is no way that it doesn’t hurt sales more than they save money
the worst thing to do
ngl geon is being geon
they don't have warranty
on any of their stuff
iirc
yep I think so too
and people are glazing about the performance, layout, case compatibility and etc.
but us as a wooting user can glaze about warranty
okay good news-ish
what do u have


I'll be receiving tikkens and a keyboard tomorrow-ish
let's gooo
60hev2 keyboard?
i pray it's the v2, i don't know lol
Waiting for Tikken and Raptor sound test on 60HE v2
i got 2 boards sent over, but only one of them is a 60he v2, but i can't pick which to clear in this weird dhl issue
they're going to clear one board and the switches, but i don't know which one will arrive
Gamba
lol but what is the other one that could arrive?
just an 80he
which i don't need right away since i have 2 already here lol
and i need the 60he v2 for sound tests
so we pray they pick the 60hev2
Silver v2 right?
black for now, i'll swap to silver later but we didn't have enough spare silver samples
will you be sharing STs right away if you get the 60hev2 or is this for future content?
will be recording pretty soon for all the sound test stuff
have u made geon raptor v2 on geon build or such?
that's if it's the 60hev2 that is, because if it's 80he i'll have to wait another week or whatever for it to be sent back and resent to me again lol
i wanna know how they sound on alu plate
nah i haven't, they're in my main build right now which is my 80he
ask them for a silver v2 if it gets sent back
the problem is i don't think we have enough silver v2 otherwise they would lol
It's fine, Tikkens are guaranteed tomorrow 
:busi
:busi>
i'm curious to see how these tikkens compare to the version cam has
because there actually were tolerance improvements from the version cam has
I had a prototype version but idk if I'm allowed to say that lol
yeah that's fine folks already know some mods have the early ones
shafie when


Hey there's a line here 
wooting effective polling rate already updated to 8k or still on 4k?
When was it 4k
it's always been 8k, i think he's thinking about eyejoker testing via multi key input specifically with his test conditions too
does wooting support 8k 60 fps gaming
8k 120 fps 

also ttc sent me a carepackage with all their latest switches
so they'll be up in first round of sound tests
Yeah as far as what I was told, colors changed, springs changed, and I assume even more improved tolerances
yep, it's gone through a bunch of iterations of improvements from that old old sample that was sent out
yeah out of all HE switches I've had so far, they were deepest sounding I've had
If wobble is as good as Raptor, it's massive W
👀
Duhuks had almost no wobble already so surely it’s better than that.
ngl, if tikken was released 3-5 months ago, this would be its 4rth recolor
so I guess tikkens get injected with a ton of testosterone to get that deeper sound
will white keyboard pcb get yellowing?
this stab tester with switch holder is pretty neat
i used a cheapie no switch holder one before but this one is much nicer
Sno do you have the tx switch pusher yet
Idk i just think the concept is rlly funny
Interesting
I do cuz my fingys hurt
Lol I always thought of buying one of those and never did
Finally a use for all the fluxes with snapped off legs
it's pretty overkill since you can use just your keyboard lol, but i figure it'll be nice if I make any videos with stab related content in future
why do u love wooting jed

why wouldn't you
Right yeah lol but that'll be cool for videos forsure
you'll be happy to know i helped sander decorate his office then
he needed something to fill the empty space
send my regards to sander
Birb!
Heyo guys, I checked this discord for message and only found a few, are there any more Panda HE switch users? Checking for compatability with the wooting HE60+
good point
what do yall think owlab ti or raptor he v2s?
do you have egg festivals like in stardew valley
Wootstock ☮️
Switchy Hendrix
divinikey supposedly sells the raptor v2 but I'm not 100% sure if the price calculates shipping (for EU)
Update: it does not. 25 euro shipping for Belgium
Waptows
deltakey is starting to sell the raptor v2 this week i talked to them its 4.20€ per 10 and 8€ shipping
Yee, been waiting for a while now. Thought they said end of last week
yeah they did
but i asked them on saturday
"the Raptor HE V2 are still with DHL customs. I really hope to finally have them on Monday-Tuesday"
thats what they told me on saturday
so hopefully this week
Oooh they're from france
yeah
so they should be available this week and also they are gonna restock owlab ti in less then 2 weeks (at least thats what they told me)
I'll just sit tight then, only need 'em for gaming anyway
yeah im gonna get the raptors as well
hope they are available in the next few days just hang on
Why can't venom's calibration be as good as wooting?
i tried some switches..
they worked on wooting properly, while on venom it's not that stable
Venom's 2 pcb's stopped working for me with Panda HE switches after updating their software. Currently battling support to understand what's going on.
Wooting auto-calibration is just on another level
Hey, has anyone compared the haimu dove he to the mathew silent and the raeds he switches yet ?
yeah
Totally different switches. Raeds he are rubber dome style switches and haimu dove he and traditional silenced dampened stem style switches
Dove and mathew seem to be the sameish switch from best anyone can tell
could be that mathew got access to early version of them
Alright
Even though they're structurally different, which one would be more silent ( in a stock wooting two he for example ) ?
In your opinion
Panda HE are south-pole switches and aren't compatible with Venom
they're both really silent, raeds i wouldn't buy for normal usage though and are an acquired taste
they don't feel anything like normal switches
some people love them, some don't
I see...
Why wouldn't they be used for normal usage though, do they feel too much "squishy" or something like that ?
they're based off ec rubber dome style switches, not exactly the most accurate with the silencing and tactile nature
silent switches already are less accurate than regular switches due to dampening
i wouldn't use silent + tactile switches for typical gaming usage
Ok, thanks.
I don't mainly use mine for gaming though so that should be ok.
The raeds seems sold out everywhere though so I guess I shall wait or go for another switch.
people have honestly liked the tecsee more than the raeds
i'd get those instead
they also come in silent option
I'll look for those too thanks
Oh I won't buy anything yet
So, can wait.
@glacial wind What's the name of the tecsee switch in question ?
just tecsee he lol
worlds longest normal name link
you can see there's a he linear option there and also tactile and a 2 in 1
Thanks I wasn't able to find it.
How can a switch be linear and tactile at the same time ?
thoughts on JTK key caps?
they're fine, although people always put them a level lower than gmk and kkb
yeee i have a set of these by them, rough edges on some keys. can't find a gud gmk or kkb set for under 100 rn
they have one great green set, wish gmk had that colorway
I want to buy some stabilizers for my Wooting 60he + any recommendations? and that it's compatible
Still shipping
Brother, I used them for 5-6 months, after an update it stopped working, bought a new board set everything up was working fine, then did the update again on the new pcb boom fucking again not working.
lol i think tecsee stuff is pretty neat. I would never use it for gaming but they're very cool
typeplus x yikb or sw knight stabs
You can't use Typeplus on 60HE+
ah
right
i forgot that 60he+ is weird like that
That too, might not work properly on 60HE+
Get Swagkeys Knight stabilizers
Stock stabilizers are good
sold out where
Lube & tune and they will be as good as third party stabilizers
there should be some in stock in different places
on the module
but the vendor you want to use depends on your region
wait why?
honestly i'll be so happy when v2 is around and everything is just compatible with all the main stabilisers
i forgot that 60he+ is still using the weird plate cutouts
oo playstation keycaps arrive tomorrow, so maybe i can get tikkens + 60he v2 and keycaps tomorrow ready to go

playstation keycaps go well with the optimum case too if i case swap it
the 60he v2 is still on dvt?
or the coating successfully went through the sweat test?
don't think anythings been said publicly, and i'm not in production anyway so no idea personally
what is 2 in 1, is it basically tactile and linear?
i assume yeah it's their tactile plus silent version
where as linear is just silent i assume
i'm not even sure raeds are still being produced or if they're doing revisions before making more
feel like it's been out of stock for awhile
im waiting for a revision at this point, me want dat rubber tactile but 8khz board
i know some folks experienced some weird clicking noises with the raeds
i never saw that happen, but i only tried them briefly at keyboard display meet up things
sad
ngl, i need to stop fomo on venom
it's a lovely board but i will keep it as a display only
The v2 60 will be here soon
yeah
from this moment i realized
i'm such a fomo
And you can get the 80 if u want a tkl
until i buy and sell ±8 venom builds
Nature is healing
i'm comfortable with 60% don't worry
or gearing up for raeds v2
YUEAHHH
I'm genuinely excited for next raeds
🔥 🔥 🔥
Sussy Baka
All you need
All you don’t need*
tactile dome can genuinely be good if it has 8khz and nkro
yeah you only need a mere deadzone of 3.0mm and you're good
I'm genuinely okay with that since I do fixed actuation point.
For gaming no, especially if you play rhythm games
When raptor shipping mr divinikey
sir this is a wendy's
heyy,
which exact mcu model (ARM) does the wooting 80he & 60he v2 use?
Sir this is a cheap sounding tactical switch recovery meeting
tactical switch
nice name for tactiles
I need to wake up again shii
Thank you
d
id recommend using an STM32 chip for custom projects instead of a GD32
i was wondering and still learning about riscv as well (preparing for the future, since a lot of companies are looking for riscv dev)
but still ARM dominates most of the everyday use technology (for now)
just wanted to curb some expectations if there were some. GD32 is just an STM32 clone and while they generally work there is some pitfalls in the areas of high speed keyboards.
i see
the stm32 is the far easier one to use in hobby projects
and widely used also
i was planning to purchase the riscV framework mainboard
Ever had to install anything Hejin in an 80HE? Then you’d get use out of a switch pusher. No more sore fingers. 🥰
Tricky, they weren’t before but they might be now. What’s the reason you’re even considering paying $100 for 70 switches?
Tactile feel, great switches for me personaly
FYI ^
And Like mentioned they worked on venom, after update they don't anymore. So Idk anymore
Bone not so much, but skin is somewhat comparable to rubber 
Do you have a 60HE+ already?
Or considering buying one for that?
Anyone got the asiimov clear keycaps on a 60HE? Just wondering what the caps are like and if they’re worth it
Whats with these insanely specific questions regarding one niche product being used with a 60he today
I dont think anyone here has looked at those but its probably ok if you like the look
I mean they wont be on par with premium keycaps etc but thats ok if you like how it looks
I'm thinking of buying it, but I can see from these comments that the v2 is coming out so idk what to do honestly
Do you care about split space
If the answer to that question is no, then you will be fine buying a 60he+ today
Like only difference is split space
What keycaps would you recommended (premium) obviously I know looks is a preference thing
The 80HEs and some 60HE+s have updated scanning which is why Panda HEs work on the 80HE but not on an older 60HE when tested. So you could wait for the 60HE v2 as they’ll most likely be compatible with that.
I would recommend you take a look at what GMK keycaps are on offer right now
This site is great for browsing and seeing what exists
PBTFans has some good sets as well
Thankyou, will do🫡
I’ll take a look!
And then you can check other vendors for your region if you are outside of the EU
Wuque studio make very nice doubleshot basic color combo keycaps for pbt also
and osume are king of the comfy vibe keycap sets
Nah I’m EU, I’ll take a look at what you linked
then you have your usual abs options with keykobo and gmk
@molten wedge Gateron will be releasing a tactile magnetic switch pretty soon and that’ll be compatible with the venom as well.
It’ll be around the same price as the Panda HEs, probably.
is it the one with the round stem?
Censor the word please
Spark with a tactile leaf, yeah.
G*teron. 🥰
Thanks
Giteron
Discord: fun detected
Just don't type
🤯
Gyatteron
If their switches were good
Is there like an FAQ or an existing convo that deepdives into Zink vs Aluminium cases (specifically for 80HE)?
I mean then what try to sell the HE Pandas to someone?
But alright, I'll wait a bit
Nobody is buying that brother 😭
You can buy a 60HE+ as well and return it if they don’t end up working.
If you need something now.
As someone that has both, zinc is a little bit deeper and slightly heavier (also has annoying ass case screws), aluminum sounds a little bit brighter (also has ball catch system W GT80). Just for the lack of case screws alone GT80 is best 80HE case
Thank you Sir/Madam, valuable feedback for me!
Lameron
Gatorade realest
Same price as flux but more

It looks like Sparks so might be $1.7 lmao
Can bet they will double or triple the price for "innovation"
Hey guys and gals
I got a question regarding the transition from Mechanical to Analog.
Today I bought a Two HE. I am currently on a Ducky with Cherry MX Blue Switches. I like the aggressive feedback it provides. Especially while typing. I think I used to feel like linear switches were really unpleasant for me.
I've just recently learned about Analog being a thing and since I just broke my Keyboard (water) I wanted to try Analog since the benefits seem to be tremendous.
Any advice for a smooth transition? Tips on mindset, hardware modding, software settings would be appreciated. I decided against buying other switches before the board even arrives but am open to suggestions, I also heard rings might make the feel more like what I'm accustomed to? Before my MX Blues I had Razer Greens and MX Browns before those.
Since I mainly game with over-ear headphones the sound isn't as vital to me but the feeling is important.
In general I am curious how y'all adapted to linear switches, analog in particular.
Didn’t expect anything cool from gateron in this universe
I wonder if they’re gonna have leafs of a non-magnetic material
or they just reuse copper
I’d try it out stock, see how you like it and then change the things you don’t like. I wouldn’t use very sensitive settings right away but you can try stuff out and see what works for you man.
I don’t think many people use tactile for gaming, so it’s not that big of a difference for them.
you might just love it tbh, i swapped from clicky to linear analog ages ago and loved it almost right away
there will always be an adjustment period but eventually you will just know whether you pressed a key etc
you could also spring swap for stronger springs if you would like that
Pure copper isn’t magnetic so
Not magnetic but it does affect the magnetic field, which is kinda the only reason to use a non-magnetic material.
So copper plate wich i ordered is suck in HE conf?

Woot came stock with a steel plate, so no
but the leaf is as close to the magnet as the spring is
so I’d be kinda worried about that
Oh ic
I’m more interested in how the tactile bump will affect the switch travel. After all, it shouldn’t be made too pronounced, as it would skip several millimeters of travel
I can just imagine the faces of the 0.001 mm fans
W
@glacial wind are the Jade pros from gateron comparable to the Raptor V2 HE?
Sure. But so are every other closed bottom 3.4-3.5mm switch
They’re comparable in sound, although jade pro been outclassed in tolerances by the newer switches
Jade pro is just a very standard typical closed bottom he switch sound so almost half the switches out there sound similar to average person
O i meant is
The difference between the Raptor and the jade pros
specifically
Any updates on Tikken?
What do you mean?
The difference between the jade pros and raptor switch
yes what difference
Are you asking what the difference is lol
YEAH
You just said difference
Jade pros are not at all comparable then if you mean not sound
At least not by enthusiast he wobble peeking standards
They’re perfectly fine switches but beaten in wobble by the owlab gen and now even more by the raptor gen
I should get them tomorrow ish
Ok now thats what i wanted to know
No updates beyond that though for the public anyway
What about for the private?
Many many updates for the private wooting employees
For your reference when I switched to TTC POM, they outclassed the Jade Pros in every way. Raptor V2s now are outperforming the TTC POM for top wobble and are looking like the best bottom wobble on any cherry stem switch rn
Ive been gone a week. Who is doing the wobble testing?
Sno has it, I can DM it to you for quick reference
If you’re curious
Thanks, no need Sno will catch me up
They’re physically incredibly impressive wobble wise
Wobble difference is noticable enough even for just visual look
They’re the first real upgrades I’ve seen
For a non boxstem to blow the POM out of the water is a rare sight for stability
And first new switch with 45g long spring 
Im not a wobble maxxer so that's not a factor for me personally but I love that things are improving.
Well top wobble isn’t as crazy because top wobble isn’t as tricky to do, but the bottom wobble is impressive that it’s at least physically as stable as a ttc box stem switch while having mx stem
They also don’t sound like Poms so it’s a big step up
Ok now that solves it all out
Glad im coping the raptors then nonthless
What's your thoughts on the sound vs the TI's or Tikkens?
Atleast for the owlabs bottoming out with hold lean in Tarkov is noticeable, hoping raptors is like a brick
I think owlab and tikkens sound better but that’s just sound preference since all sound clean
Planning to build out a board today with the Sparks and see how they feel/sound
Sander is sending me his spare sparks too, so I’ll be able to check them out soon at least once Japanese mountain public holiday is over lol
https://youtu.be/dstfsSQVD28 split stem seems to have some effect, so that’s good at least
it’s not all marketing once again
I’ve been putting off ordering them to see if a rep could send me them because they’re so absurdly expensive even if wooting is paying for it
But gateron been very hit or miss with communication so it’s been slow
every switch manu is 😭
Funny enough suddenly reps reply way faster after the first switch content piece I made for wooting hit 10k views
Ttc have always been nice though. they replied right away even before my image went viral
yeah they should be available this week
This week they’ll arrive but not sure if he’ll list them right away
there’s a chance tho 🥰
It looks like 100 pieces of Raptor V2 will be 38 USD for me, 61 with shipping. Pretty decent tbh, will have to wait until next month however :)
Did you account for the import tax?

nope, but we COPE with that when the times comes xD
this week 
right now too busy to even open my new 80HE and set up, also have to deal with an unfortunate I210-T1 fake return.
If you reached out but havent received a reply back, lmk and I'll send you the contact I have that got them to me.
oh yeah that'd be great. I ended up emailing one of their reps but never got any reply
I need more Ratpor he v2 sound tests 
customs do not have the mandate of heaven
sno posted one
Looks cheap, but shipping
If some magically happen to be sent to my mail address id be happy to sign one for the Varedis Certified review

Im the wrong P role 
brb applying to wooting to get tikkens
worked for me


Raptors on the way 
I got my raptor V2 today. I like them, good stem stability, nice sound, decent factory lube. They are better than the jades I got on this build previously (hopefully)
I still prefer my ttc poms but for the price it's definitely S tier
my shitty review
when I say ttc I mean wooting poms
@everyEUcitizenhere: https://deltakeyco.com/products/geon-raptor-he-v2-gaming-switches
Geon Raptor HE V2 Gaming specifications: Each pack contains 10 switches Hall-Effect Operating Force: 35.0g Bottom-out Force: 45.0g Spring Length: 19.5mm, NAS wire Spring Type: Single-Stage Top Housing Material: PC Bottom Housing Material: Nylon Stem Material: POM Full Travel: 3.4mm Factory Lubed
EveryEUcitizen 😭🤣
Hahaha plastoc
Least french person

I said plastic
Bien suuuur
80he and a venom
170
but 80he has rawhuks
90 always.
the difference is literally only a couple €
matter of fact, buy double like alex said
😂
What if you really like them is the Q and which board do you use most
maybe ill buy some 205g0 while i'm at it
80he by a lot
Yeah atleast 90
also planning to get some tikkens later this year with 60hev2
Then you can migrate rawhuk to venom and see if you want more or use tikkens
hmmm
yeah ill do 90
super tempted to buy some bullshit like that ws lube station

i use that actually. it's quite handy if you like batch lubing without using bowls
i dont have ttc switches so i dont know how often i would use it
although i don't even know if i'd hand lube raptor v2s
they have plenty of lube on stem and were light donut dipped for springs

How much have you spent on their site lol
give us the tikken right meow
Meh only 30pcs
report him for bullying. absolutely unacceptable behavior by a wooting staff member nonetheless!!
you’re getting only 30pcs?
XDDD €125 for 30pcs without shipping
master keen will hear about this
"WHEN TITON REALEST"
but whyy?
Oh i’m stupid
Damn I’m almost get scared
Now I see
€33,36 for 80pcs
Waptows w2 goawted
Anyways we need more colour options for wooting products
Hopefully the knobs once they release get different colours, more alumaze colours, more cable colours, the v2 case, keycaps….
PBTfans salt lake headed for end of August production, looks like ultimate raptor build will be waiting for a few more weeks 🥀
it's fine
Anyone have a sound test of raptor v2?
Thx mate
Which keycaps are those?
Raptors arriving Wednesday 🥶
I finna call canada post and scream slurs till my package comes
how dare they offend the jade emperor
Hell nah looks like I want build a mx tofu tkl
But I don’t rly need it
80HE is enough for me the only place where a Tofu would come in handy is at school, but lol, carrying around ±2 kilos to school is tuff
You’re going to offend your new PM and probably get sanctioned for hate speech. YMMV
@toxic surge did you get some?
your bank account after that:
hi twin
Sup m8
good, how r u
Do the Typeplus x YIKB need the geon spacers to work
depends on the switch
but most HE switches are 3.5mm

so u might need it
Everything’s good, what about you?
unless u're using 4mm switches like lekkers
What a bullshit I’m typing
it's 4am here and i just woke up 

Copper plate update: In production 
copper plates are high pitch or lower pitch?
than alu or cf
i never used copper plate before
Something like brass
i see
Same
what difference does a metal case make to the sound profile vs plastic again
metal case is a bit brighter
while plastic like pcr has a deeper sound profile
i was not home
mm
RIP

i wanna go lower...
I bought the last 3(0)
dang
I talked to them again they said a big restock is coming next week
Double the shipping. Rip
Wym?
Unsure if I'd buy to replace all my switches or just those I use most for gaming
Yeah
Yeah idk I would replace all of them cuz I like it better
Yeah. Probably gonna do that
The sensor can technically read them but it's not advised to use them
i see
Im using Owlab ti which is 3.5 iirc
yeah u should use stem spacer
is the cheapest place to get them if im in the us just gonna be aliexpress
Is there a holy80 dupe? Cant finde one. Only for the 60he
KBDfans Stem foam ?
not sure if it could be replace with Geon stem spacer or not.
🤔
Shipping prices from kbdfans is insane for me rn
$20 for the foam
the reason why I didnt get a GT-80 or Holy80 is bc the shipping was $70
@calm pulsar @tropic urchin
@steady halo look senseii !!!!
the novelties flew in but customs holding them
also the green is nice imo
@stray tiger Does faja approve?
🐉
You gonna make us look at it through a keycap condom?
yes
lool i'll open it right meow
yeah this is not the actual color, you have to unpack the keycaps🤓
now poke a hole and show us the content
That the pbtfans set thats like xray but in green? I think its a girls name or something
no its MW Jade Dragon set
You are gonna be on Maury
Ohh nm
this is not PBTFans Emma, this is John Jade Dragon
I was thinking PBTFans Emma yeah
john jade LMAOOOOOOO

Dang Emma is on sale right now https://kbdfans.com/products/pbtfans-emma?variant=42581504819339
Inspiration The design of Pbtfans Emma revolves around an imaginary luxury emerald boutique named Emma, where the most unique and spectacular pieces are crafted. The set features dark green semi-transparent outer shells paired with Primrose white opaque legends. When combined, these elements create captivating shades o
its kinda cool the green caps is translucent ABS and the white alphas are PBT
John Jade Jingleheimer Schmidt falalalalala
Emma looks nice but when Cam compared the sound of Emma vs GMK on his frog, Emma sounded mushy and not as clean as GMK
niceee
probably has to do with the way they do double shot tech
Why would you say this while I’m looking 😓
@tulip rapids told ya
wheres the wallet mob to go after thockfather for saying its on sale
smh
good job son,
now continue my destiny
nice avocados
nice simple elegant
thats emma i have a different set
6.25u is the way of life son
i know,
but emma green fits the dark green case u want
what case you ended up choosing
havent decided yet i was either gonna use my tofu arcylic case or wait to get gt80 case and get the white and green to see how it looks
the green gt80 case is the same colour as green frog mini
Im building out this Hand Engineering 2000 Mini SE right now with a venom PCB and a custom plate from Hype. Maybe I'll throw a PBTfans translucent set on it
Maybe pbtfans neon
i also got the white pbt alphas that comes with the set 👀
How much this sht cost you
I think I traded for it
Price available upon request
Get to work before my Jade runs out 
I think this set would go nicely with silver or the green frog
cream won't be as nice with white legends or white alphas you got, but thats imo ofc
where did you get your alu plate?
no i meant like ima do another 60 build later on with venom pcb
and maybe do cream
for the jade set i havent choose the case layout or colour yet
ah okay
🙂↕️
you think the arcylic tofu case is nice with the set or wait till i get another case @calm pulsar
60v2 jade style 🐉 
semitransparent look might go nicely with acrylic bofu
Think Im going to go with dual shot on this board
Dual shot 
what board is this?
From Geon
Hand Engineering 2000 Mini SE
Dont like how it sounds with the POM plate and TI's so going to try the Geteron Sparks in it
Gn
Make sure to throw a flux over your shoulder to ward off any negative forces
flux magnet so strong it creates a force field around you
great thock
great c//k
Thanks bro
rip eu people
that's the 80retros Game1989 set
Oh oops wrong video
that's the Domikey Ruby

