#🔧│keyboard_modding
1 messages · Page 721 of 1
i don't really need it
but it's nice to have
I can't hold that benom because I can't sleep very well
since i'm afraid to brick the pcb
every morning i have to pray for benom
do it...
as far as my experience, after i own the benom it will be different
you with the benom
Wire balance, clipped, and lubed stabs. Lubed with xht-bdz for wires and 205g0 for housings
the right shift still kinda ticking
is it ticking or the case resonance
not ticking
ngl i can't tell the difference between vid
it's the upstroke of the wire
its just cause its huge ass
could need more grease
it clapping
will try more lube ty for advice
Spacebar is fine, but i think you might need more grease on the wires for the other modifiers
Enter and Backspace has some scratch
really?
because it sounds like ticks
could be from the switch or you didn't lube a good layer of coating on the housing and stem
switches are stock
ima be so for real, i havent heard ticking stabs in a really long time
but at the same time, ticking ofc sounds like a tick
but this is probably from the upstroke from the switch
i see
my enter keys are producing the same sound actually
ill send of other stabs i modified for comparison
i might need to relube my stabs
same modification and material
krytox wore off
what board?
wooting 60he tofu case
all though these are durock plate mount stabs
i prefer nylon housings for stabs
i like the scratch feeling they produce
i usually like scratch in my mx
esp on the modifiers
wouldn't really want it on my stabs tho 
well i still lube the housings it's just the material
even stem?
it could be the switch that can be scratchy as well
¯_(ツ)_/¯
it is aluminum
how do closed vs open switches sound different?
open is claćk claćk claćk and closed is cląck cląck cląck
im sorry but idk what those accents mean 😦
they be joking. Closed bottom = typically cleaner sharper sound, open bottom is more muted sound
closed bottom typically much more popular preference wise, but there are a few open bottom switch guys out there who like muted sound
Embrace your future shafie
Recolor maximum
Hell nah
Jade ahh reference
What happens when you relet Gateron into your life
You get the same switch no innovations 🥀
good thing wooting stop their partnership with them
lekker tikken genuinely breaking up the monotony of ti He look alike and switches trying to beat ttc pom
I mean there's also the round stem switches
Horrid sounding
I thought fluxxes sound ok
Flux isn't round stem
The problem was just them beeing expensive
Octogonal but that's pretty much round

the good old paradox, how many sides does a circle have
Got my new IEMs
nice keyboard
What we need are 3rd party fluxies recolors so we get real QC since WS seems content twiddling their thumbs
No new springs and no updates is WILD shit
And perhaps a new price tag
Hence the multiple recolors 
Somebodies gotta do it
Need PP plate and PBT caps for ultimate marbly build 🥀
Thocc
Them posting this without a sound test should be criminal
Not even inaccurate foxtail mic test
In the worlds most echoey warehouse to boot
at least it's cheap
Someone save us from this hell of thocky marbly
Decently priced switches releasing for once?
Take notes people
yesh, I hope tikken cost very close to lekker
We need Deng god pros that are $0.001 per switch and also mildly mid performance
elf kings better
Give us airy and crunchy
Stock TTC Poms with custom aliexpress springs
Next question
When titons
Shit ass iPhone recording on the same surface but doesn’t sound too bad
Module with Raw on PC plate with foam in stock case and stabs
For this
tohkc
Frfr
Illegal to ask questions nowadays
Church of Wooting disinfo has deemed it so
No Cap
Forgot your bad seed tech :POWAGA: king
They hate me cuz they ain’t me
Yez very Amerikan of u
Hi guys i got a question for the 60he
Im kinda having trouble between picking duhuk or owllabs
Which one shouldnj get
Which duhuk
YunExpress taking their sweet ass time with my owlab switches
yeah you're gonna feel those 10-12 days while it treks across china
economy shipping with yunexpress is quite honestly the worst
What’s the best looking aftermarket cable?
id just get a color you like off the wooting store unless you want like a $500 bespoke cable
+1 for lavender purple
If you want maximum case versatility with future sets probably silver
Meteorite grey also looks kinda cool if you want some texture added word
Purple kinda bussin too
They need more colours tbh
Yeah I’ll never say no to more colors
And personally im not a fan of coiled
My top 3: Silver —> more versatility, meteorite grey —> for textured look, purple —> if you like purple
apparently it’s 3-5 business days from china to the UK with unikeys shipping, hoping it’s not too slow
waiting on my 80he module and case too
and got my keys
I prefer my aviator cable straight
I also want to mention the progression of the spring weight in the switches, wooting's lekker starts at 45g and bottoms out at 60, gateron reds actuate at 45g (2.0mm travel distance) and bottoms out at 60, which means gaterons switch has a much lighter starting force (approx, 25-30g) compared to the lekker switch, gateron's red switch feels more exponential and bouncy which allows the fingers to naturally move up and down, compared to the lekker which has a really bad feel using the switches
In other words, you'd probably perform better/faster on a gateron red switch that theoretically has rapid trigger, rapid trigger isn't done much justice on their crap lekkers tbh.
The biggest issue is the weight
then try some third party switches
I have the coiled black cable rn. Kind of don’t like the cable look anymore
try owlab ti he, or some geon raw he, or some ttc pom switches
don’t just try lekkers and assume all he switches are like that (the v2 are MUCH better than the v1s but there are better alternatives)
Biggest issue is not the weight. Lekkers aren't the best feeling switches out there, because they are very wobbly and they might feel a bit mushy due to open bottom. Try something else, for example Owlab Ti. They have way less wobble than Lekkers, travel distance is also less (3.5mm closed bottom instead of 4mm open bottom), You have two spring weight options, 40g bottom out and 50g bottom out, depending on your preference.
V2s have the same weight distribution so it'd perform just as bad as the first version
I can't find the starting weight or actuation weight on those switches
The exponential weight matters a lot
I don't care too much about sound or stability, I care about performance
The feel of the weight is most important to me
40g option has 27g initial force most likely and 50g has 35g.
That's horrible
Just as bad as the lekkers in terms of weight
You can't repeatedly spam on those types of switches as easily, unpopular opinion coming from a vsrg player
Gateron's reds with RT would easily be best option if I could find a HE switch with the same weight
Spring weight has no impact on performance, because you have adjustable actuation point and rapid trigger. It's all about sound and feel and because of that Lekkers are way worse than Owlab or any other new HE switch
Yes it does, because at any distance on the switch you have to put more effort to lifting the finger before pressing down again, especially finger micro movements.
The larger weight difference in the reds allow for more bouncy feedback
You 🫵 can’t. I can. 😃👍
That’s just preference, not performance.
Wrong. How would a spring weight affect performance, you are literally using HE board and not MX
I did say unpopular opinion, this Is a difference 3rd person shooter players or regular gamers would not notice
Why don’t you spring swap your switches?
What's spring snap?
There are numerous 3rd party springs available.
Oh swap
You change out the springs of your switches.
Yeah I have
The best option for me rn, on another board is I cut the ends of the spring shorter
So the weight feels more exponential and bouncy
If I had to guess the weight starts at like 12-15g and bottoms out at 35g
This is on a board that has an RT sensitivity of 0.01mm
Most responsive option
That is, after playing on the crap lekkers
You are one of the very few people that prefers a bigger difference in force required between initial and bottom out lol
There are shorter springs for sale too.
Yeah probably because I'm a 4k player who mashes keys, but then again others who play don't think about it as much as I do
Cutting them sounds like a hassle and probably also causes some undesirable sound.
DIY method 😂
Mango would love some extra short crunchy springs
Had to resort to that coz other options just didn't perform as responsively
@sweet oak start cutting your springs for extra crunch, new tech just dropped
Are there any HE springs that have the weight difference of an MX switch?
Pretty cheap too: https://a.aliexpress.com/_EQk0qP8
Lightest you’ll probably find are the L35 springs with 20g initial and 35g bottom out without rolling the dice on aliexpress springs
Maybe it's not about springs and you just don't like Lekkers, because of open bottom and 4mm travel. Just try other switches, you can get 5pc on AliExpress, they are dirt cheap
Thx
HE switches probably don't have large weight difference due to increased likely hood of accidental doubletaps
Which makes sense but I'm an outlier
Adapting this into our production for MangoHE
Are short springs more common in mech switches?
Most mag switches have 15mm springs which is similar to mech afaik.
Yeah $150 it sold within an hour lol GG
A Polish socialite probably bought it for research purposes
what were you even selling lol
A keyboard that no one here wants me talking about
Yeah so he could buy it without any competition
What are you a cop /s
lol I’m just a happy Wooting consumer
Bought three boards and I might buy another one when v2 drops
Crazy strange journey it has been 
I remember when my keyboard was just going to be stock

I'm ok with open discussion of other boards/brands here. I'm just not ok with people promoting other HE boards in here.
Ive bought/owned 20+ HE boards and not all from Wooting so I certainly appreciate healthy competition.
what is your favorite until this day?
Tough question to answer as I have favorites in a number of things. Favorite for software/support/community would be Wooting (surprise). Favorite for layout flexibility would be Venom. None of the other boards/brands scratch an itch better than those 2 brands for me.
BootingxBenom 
80HE 7u collab we’ve all been waiting for
Cursed
excited for rakka release for layout options
That’s just what peak keyboard performance looks like 🫦
Some would say not full TKL is cursed too but nothing can be perfect 
I keep hearing about rakka but never seen anything lol
Pass on Rakka 
remember how we got baited by aligner and the other guy about 60hev2 layout options? the pic was taken from rakka
Lolz ahh
Yeah I’ve been pretty happy with my venom so far. Gotta check out the new UI
yeah venom has the perfect layout for me when it comes to tsangan anyways, but curious what rakka would have
I just say that because of Rakka ignoring Geon
You getting new caps for bakka? 🫦
ngl,
i feel bad for the venom users not receiving enough support (having problems, etc) on their dc

yeah that was weird
the advantage of venom is layout flexibility and case options
and venom is not a beginner friendly keeb
if they responded, the answer seems weird (language barrier maybe)
What problems
bricked pcb, not recognized by windows, etc.
idk, so much in their forum
buy benom now
so u can be froggy
He needs keycaps first
I got only 93 usd
bro, u can use the keyboard without keycaps
Everyone keeps calling venom "not beginner friendly". I guess that's one way to describe it, but as someone who wanted to know what that meant, I can say with some confidence it's just a worse experience in almost every way compared to Wooting.
The only thing I can think of that Venom offers is some of the things you can configure. Everything else from the build to the software is either worse or just more of a pain in the ass 🤷
bare switch better
On hold🥀
You need some raw milk friend 
I don't think it required much extra capability, just a willingness to deal with a less pleasant experience
Assuming we're talking about module, for a closer to apples to apples comparison. Obviously fully built is w/e
nooooo
Only case + pcb 🥀
reusing lekker and $5 chinese caps
Layout/case flexibility (primary due to the daughterboard) and having 8K support on a 60% format today (negligible on the performance, but 8K IS better, maybe just not noticeable). Otherwise, that's it. That's the advantage. For me though, thats a big advantage as I enjoy playing around with custom boards.
if i drink milk = long hours on 🚽
For saying you can use keyboard without keycaps it seems like the punishment fits the crime
However, if I was serious about gaming, reliability, support/warranty, etc, I'm picking Wooting every day. Especially the V2
Me->

nahhh, if u can use a keyboard without a case...
that means u can use a keyboard without keycaps
just use pom switches
RIP
free keycaps
That's why I go for 80he, I simply can't see any other option that time that matches that need.
I’m sorry but the raw milk gods decree your punishment
true, and don't forget longevity
Sure, I get that! Layout options are big, and just messing w/ things is fine if you're into it. I just don't buy into the sorta elitist "it's not for beginners" stuff I've seen on here. A beginner can do it, it's just more of a pain.
Then again, maybe I'm giving too much credit to the average user on here.
best_fortnite_settings.bmp
What’s the best valorant settings
Anyway, don't listen to gramps https://media.tenor.com/OH6o_0b68cAAAAAj/venomsax-venom.gif
Yeah I haven’t had any issue with my venom except for cable being not able to work
Yeah 7u goated
ngl, i might purchase knob and uwu
5 knob and naked 80he for some rhythm game action
I'm sorry what in this equation is naked?
which one would u purchase?
4u or 1u?
1u
see through
You actually are indeed giving too much credit to the average user. The average user is my daughter who plays fortnite, would could never imagine the thought of building a keyboard, much less opening one up. We builders/modders are the minority of the minority
Huh no 🧢
same, I can't find myself loving the look from the 4u...
and i'm planning to use it on 60heV2 as well
https://www.youtube.com/watch?v=LP33YKX7mYA press and spin
[MÚSECA 1+1/2] メンタンピンドラドラ (朱)
enzo + O2i3
Lv. 13
5 knob and spacebar as pedal
Modding ze keyboard is less effort than I thought it would be initially
Modding mice on the other hand iykyk
Scurry
ngl, i saw a lot of people modding the op1 8k
i might give myself a shot

Have fun with that nightmare
I haven’t changed my volume in the past year
The technical gene (whether it be building, troubleshooting, creating) is not as common as you would think. What is easy to you is alien and scary to others.
Not for me 😭😭
V2
op1 8k is perfect for my tiny asian hand
Smaller PCB
I’m hardly a carpenter myself 🤓
yeah, i purchased it already
Stock op1 shape didn’t work for me
waiting for that to arrive
Yeah I need to lol
I’m usually not very technical, but I do have fun buying new parts to see what sounds nice on the board
And then changing when I get bored
Waiting for PMM to do a Cyber shape for op1
I might mod my Rog Azoth so it’s not a POS but might just need to find new switches that aren’t dog water and leave it there
Then I insta switch
Wooting would like everyone in #🔧│keyboard_modding to spit into a test tube while we identify the technical gene. Thank you.
M3K pissing me off
Gotta give me atleast $300 for that champ
Honestly not a bad deal for spit these days
And the eventual data breach
Too late Shafie already got his hand on the timeout button
http://www.playstation.com/flexstrike
Always Ready for the Fight™
Join the fray at home or away with the FlexStrike™ wireless fight stick. Take the fight to them with the included sling carry case and gain a competitive edge with ultra-low latency wireless and wired response, a built-in rechargeable battery, and a durable, ergonomic design...
wow
wooting when
Speaking of Shafie, hey guys what’s going on
Sadly Pulsar isn't here, I would time them out
That's for sure

wait
what happened
with Pulsar
Just annoying mouse issue
Sup. Can anyone recommend me readily available in EU Wooting One linear/rgb switch replacement?
typical qc pulsar
Yep
Flaretech switches? You can contact Wooting and ask https://wooting.io/support They will probably be able to send you some.
Pick the category and issue you need help with, and we'll guide you through the process.
I already asked and they said they are limited. I need almost full set
Yeah that's gonna be a tough one supply is extremely limited
Since they haven't been produced for a long time at this point
so my wooting one is K.I.A and there's no good replacement on the market 😐
Yeah, I don't think you will be able to find full set of Flaretech switches.
Probably time for a new board 
Prob just buy 80HE and split num pad imo
Wooting One is TKL 
Thank you Church of Wooting Truthest
Don't you dare
indeed

It’s a title better fit for a mod than Charlie from IASIP
It’s a heavy burden to carry, but you’re just the man for the j*b
alr
@stray tiger when does your plate arrive 👀
I added an extra plate to my order after I placed it so not until Wed I think
once again sony dives into something that has been out for ages
but this seems nice, looks like mech buttons as well
Was even faster than waiting for torontokeyboardman to source any aluminum plates 🤣😭
i wish
other companies do it better than them
Will you be the first with PP plate 80HE?
That toolless gate swap is neat
@glacial wind where did you see the spark sound tests?
Hi guys
I think he found them on bilibili
Ugh, I struggle to find anything on there once its a few days old. Thanks!
Same lol
Potentially 👀
Maybe cam had it first if he has one
But I think just benom
Guaranteed #2
Dont come yelling if you get actuation issues!
DONT TELL ME HOW TO COMMUNICATE OLD MAN yelling intensifies
That’s why you cut it
Cut what
Cam had the tech
at least its not poron gasket replacement
The silicone
It's even softer when you cut it
Cut the silicone into pieces, this is my last resort

suffocation, no thocking
I think it probably only affects the sound
Ye
White balance 😆
Full silicone and PP would be tuff for Fluxies to survive, but if Mr phish is correct it shouldn’t deaden the sound like pc plate
Thought this was a pink board at first
Errrm iPhone camera ☝️🤓
Yeah, you better add that silicon back. There will be nothing between PCB and PP plate and may cause actuation issues
Good enough for 28 Years Later, good enough for #🔧│keyboard_modding
We’ll see
my iphone is so ass for colors when I take a pic of my desk
I can put it back, but will experiment
Haven’t had any issues yet so should be interesante
Waiting for PP Flux sound test 
fluxes have actuation issues anyways so adding PP wont harm it

lol, it's not that bad on Wooting but still not the most accurate switch out there
I was having a great day until you said that
More
Now I’m going to write an angry letter to the White House asking for additional sanctions for emotional damages @calm pulsar
I wonder when they would run out of things to sanction😂
When you run out of things to sanction, just increase sanctions on everything else
Seems reasonable
lmao we got 10x more sanctions than north korea😭
No difference if someone curious
That’s cuz they have 5 people living in the main city
I was following Mr cam’s guidance on those cuts
Since that’s what he did with his 80HE
All I need is the silicone ring and the silicone under the larger keys, everything else I would cut out (which I almost did), and I just placed a bit of foam between the F row and the number row
Cuz boly without foams looks to boly
I guess I could massacre some poron foam from keyboard man’s foam ahh adventure pack I have
@tawdry tree found your next board
split spacebar, dedicated arrows, perfect for aligner
cursed
what is the main attractive for split spacebars? more similar sound to smaller keys?
Additional programmable key. Especially if you only hit space with one thumb/side, use the other for another input. Correct me if im missing anything.
That is as much good as it cursed 
I do want to get a 40% sometime tho
That’s right. Just extra keys. For space specifically, it’s an extra really accessible key (easy to press/reach). The right spacebar of split space is often used as backspace.
lol that’s pretty sick
Yeah same
Was just checking out the Geon one last night
I’d have to check out which layouts exist for 40%
dedicated arrows is prob too much to ask
🤣
Well 40% is nice to put on the wall
That’d be a small piece of art
A 100% would be better on the wall imo

Well you cant use it, same as real art
well
Imagine someone walks into your house, and asks why you have keyboard on the wall
What would be your answer?
Art. 🥰
It’d be pretty sick ngl
maybe with a border around it too, like a painting
idk what that’s called in english
Frame
Yep 👍
4 OW60s 🔥
And frame it in expensive wooden frames
@tawdry tree keyboards wouldnt be stolen by robbers 100%
Unless that robber is also active here
But i dont think so robbers are keyboard nerds
Art is art!
that’s pretty similar
Because they foundout they have value
Keyboards are also hard to sell now
Gn
Well I thought I was done buying boards this year after the V2 but... https://geekhack.org/index.php?topic=125286.0
[IC] Sebas FE [Thailand Edition] X Aiglatson Studio [Update on Sale Time]
@harsh dove @polar girder @sacred elm @fluid ravine going to need you guys to help me snag one of these tomorrow! Only 20-25 available. DM me if you're able to help! (Or anyone else in the US I can bribe)
W Shafie promotion
divinikey 20 units launch date tmr?
Yeah 11am pst sharp. Going to need your sniping skills!
The Sebas FE Thailand Edition is a collaboration between Nuxroskb and Aiglatson Studio for a more luxurious version and designed for the charity towards the Asian Elephant Foundation of Thailand (AEFT). Profits from Aiglatson Studio and Nuxros will go towards the charity with only 100 units going into production worldw

19 hours 47 mins
It is very pretty
it indeed is
Tho idk abt the gold version
I’ll be at work tomorrow during launch. Sorry
You going to try and HE retro fit or just enjoy as is?
Always try and retrofit but would enjoy as is if no luck
Would be nice to see the plate design/file
For sureski
It has an o-ring mount option so hoping that wont matter too much
That’s interesting
Just the extras, not the boards (or do they mean extras as in overstock boards?)
Yeah idk cuz otherwise all they have are Gaskets or Plates
Id assume gaskets, plates, pcb's are the extras
low key my favorite gif xD
Lol 🤣 had too think I might just keep the esc key though it kind of matches the rest of the rog set-up.
do these keycaps taste like chicken
any recs on where to find custom keycaps
Custom as in like cerakeys/alu keycaps or you looking for generic PBT/ABS sets?
just cool designs with generic plastic keys
my bad I forgot to reply to ur message
I’d try looking at PBTfans/alexotos aggregator site which I will link to get started, finding keycaps is easy and super difficult to find your perfect set
Also take a look through the ‘Previous Sets’ of this link and you will find a metric fuck ton of group buy sets and see which colors/schemes suits you best: https://keycaplendar.firebaseapp.com/previous
finger licking good
preciate you bro
Lmk what you pick out Captain 🫡
Why is this so funny 😭😭
how do you call the keycaps that have the letters hidden and are like completely just a drawing on the keyboard
something like this
Side print legends
Then the drawing is Topographic (Topo)
But could be any drawing or nothing
Two independent variables
That’s what I was looking for
are they gonna release the h60 v2 in different colored cases
White and black prebuilt, silver separately
what material aluminum?
Yes
hmm
good choice
okay I appreciate yall I’m gonna go and goon to some keycap topography now
no comment
NVM, I wanted a joystick on a 1u to replace the arrow key cluster but I don't think that would be possible with a single HE sensor
(or 1.25u)
you might be cookin
imagine using your board as a fighting controller
Heh, I'm just trying to get my arrow keys however I can
im not not responding as well since you haven't provided any commentary anyways
still missing a few they previewed a few months back
outemu dragon fruit
outemu peach, seems to be a silenced switch with silicone bumpers on the rail
I need Owlabs to do that shit
different material/color front lips would be sick
refreshed version of the silent phoenixes
all on bilibili, have to search zynoo y65 and it's the stock switch used in it https://search.bilibili.com/all?keyword=zynooy65
bilibili是国内知名的视频弹幕网站,这里有及时的动漫新番,活跃的ACG氛围,有创意的Up主。大家可以在这里找到许多欢乐。
Hi, can anyone recommend good stabilizers for the 80HE? The original ones feel too wobbly for me.
holy recolors
Too pricey, too ugly, not my form format. Wooting One was sleeker. Skip, sadly.
popular options are swagkey knight and typeplus x yikb
for the typeplus x yikb stabs,
all my
smaller stabilised keys rattle but my spacebar doesnt, is that normal or did i set up the stabilizers wrong
do ijust HAVE to lube?
rattle is usually due to insufficient lube yes
if they feel slow and sluggish than that's a sign of too much lube
could it maybe be due to me using 3.5mm switches so they arent "fully" seated
and ik its a bit off since i can press down on one side but that leads to it getting stuck on depress
potentially some people seem to have no issues and others need stem spacers or long pole stabs
i did buy some stem spacers but im still a bit confused on how exacltgy im supposed to use them
they just go on top of the switch stem or the stabilizer stem
ohhh okok thanks, cuz yea i did read a lot of reviews from people saying the typeplus x yikb stabs are near perfect out of the box even with no lube
Near perfect means you still need to give them a thin coat of 205g0 usually
Basically no stabs exist that are fine with zero lube, but the easier to tune ones just need that light coating
Which are the beste stabs for the 80he?
No real best stabs, but the popular ones are the swagkey knight and the typeplus x yikb right now
are these the right ones?
https://oblotzky.industries/products/typeplus-yikb-stabilizer
yeah
I probably wouldn’t swap your stabs unless you don’t want to tune/lube them and want to get them predone
no i modded my 80he. last step are the stebs. i ll lube them.
MMD Holy80 clone, 557 yuan
That looks bad
Wooting compatible?
Looks about the same as the standard holy80 just without top hole engraving/with mismatch LED bar plate
Yep
what keyboard is that
Corsair K70 TKL champion series
cherry?
Hell nah
or maybe sayo
I still have my old hyperx keyboard and I didn’t realize how chattery those switches are 😭
i still have my core tkl
ngl that was my fav keyboard
I had the elite alloy origin or w/e it was called
yeah that one
alloy something
HAHHAHA
i have those too
it was the fastest keyboard
Those switches were dog water now compared to half the shit I have now
osu players said
Felt like you were like 0.01 ms behind
My hands are itching, but the money is still frozen for now. It’s supposed to be delivered between August 1st and 5th, and there’s still no guarantee the person won’t return it to me. If that happens, I’m prepared.
That was when I was like “get me off MX”
i see
but ur hands are itching for tiger?
rawr
🐯
In plans are getting owlab case and 60hev2
Ye
Maybe i should trade my 80he booting build but idk
But my booting costs me +-800usd so…
Same tech just smaller, prob not worth it from a trade off perspective
true, unless u want 60% more than the 80he layout
Keep 80HE and get smaller venom if you’re bored
Really is same shit unless you gotta go to LAN and gotta move it around
Or if you must have the OW60
Maybe, but first I’ll end my current booting build or start upgrade pc
Yeah def do the PC first
no benom
benom benom
benom
@tulip rapids benom
i'm full of benom
ngl, i want to see more aftermarket cases that support friction fit
Raptor v2
i just received my phylina switches and they are beautiful
@peak breach
Looks goated to me
aww, not 4.0mm
Did he change any tolerances or just closed the bottom of the raptors?
45g bottom out my beloved
Looks just like any other switch out there 
Nah you just blind
Aight
Almost forget the switch legs are counts as pins
Akko Astrolink mold
surely this is a hole for cooling right?
Yes, it's summer. Don't forget
oh. Eh not the best not the worst. I guess he just wants an updated entry level switch for people
Its a lube hole to insert the syringe
😭
-200 dollar
The new jade pro
They won’t be selling those
surely
I do wonder what recolors they’re gonna come out with
ChatGPT's take, please make sure to take this as gospel
idk why it happens but i got my new switches and the spacebar switch is really lose even if i pull out the keycap the switch just gets pulled out as well and the spacebar wont get triggered and sometimes there are 2 inputs
any1 knows how to fix?
trying removing the switch and putting it back in until you hear a clear 'click' that its in correctly
i did that it only happens when i press hard now it happends with my old switches as well did i damage module? i removed the old switches really carefully with my switch puller so idk how
Module isn't damaged, most likely it's the plate with tolerance issue
so how do i fix that?
Try sticking bandaid on the side, where you put the switch
or a paper
bandaid might be too thick
wdym where u put the switch? its the spacebar switch so i just put it underneath the switch?
how do i expain the switch being loose tho?
Probably something wrong with the plate tolerance, if this happens with all switches. Do you have 60HE?
yeah it happens with all switches
If this is what happens to you contact support and ask for replacement plate. They should replace it for you, because that shouldn't happen.
Pick the category and issue you need help with, and we'll guide you through the process.
i cant do it as easy as u did but when i pull of the spacebar keycap the switch comes off as well
Sticking/putting something here should help you.
Record a video and send it to wooting, tell them that your switch comes out easily. They will replace the plate.
tbh since i replaced my pc plate with the black pc plate my spacebar switch comes out with the cap too
only the spacebar iirc
My 60HE+ switch plate also has a weaker grip on the spacebar switch, but maybe not quite that weak. It's come out a couple times while pulling my spacebar but not during regular use so it doesn't bother me much.
yeah ive never had an issue with my spacebar in normal use, only when i pull the cap off the switch can come with it
but neither my switches nor the pc plate are stock
so
never had an issue with it functioning at all
i'm using the wooting black pc plate and geon raw
As long as the raptors sound like raws but with less wobble it’s a w for me
raws are unique with their semiclosed bottom, not sure if raptors are gonna have that
Looks like they also changed the colour of the diffuser
We’ve finally uncovered the root cause of the coating issues some of you have been experiencing — and the culprit is none other than… your gloriously sweaty hands!
Wooting 60HE v2 https://wooting.io/wooting-60he-v2
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://w...
Yes, it will have separate diffuser now
the secret sweating dungeon
another one
Is that just regular water or some crazy swear emulating solution
they be putting the case in gas chamber
artificial sweat
just putting water on wouldnt help us at all
As long as it doesnt peal like the 80 zinc cases
Yeah thats why i was asking
so 2-4 weeks before the next update
Man. Damn near liked my raw, pc plate, plastic case, tray mount sounding more than my TTC POM, alu plate, aluminum case tadpole mount
Crazy
geon raw + pc plate + tofu case is overdone but damn it feels and sounds good
Yeah i’ll get a pc plate with the v2
Since it comes with fr4 i think
Or was it cf?
FR4
About to switch main board with the 80he, owlab ti and stock plate and ordering the holy80
im
Maybe this was the Polish puke bowl everyone was talking about 
i just replaced my old stabs with wooting replacement stabs but whatever im trying i cant get rid of the rattle on my spacebar
Narrow Calder
Might need to rebalance it
Wide Calder
16:10 vs 5:4
isn't it 10:16 instead?
In EU land maybe, but I’ve never seen 10:16 being listed as an aspect ratio in any fps games
they should do that to bring in more tiktok user
what screw in stabs should i get?
stock ones are good
if you have the 60he module or any 80he
Huh that’s looks not that ugly as I expected but I def buying one more keycap set
just one more
And damn, looks like cherry profile sounds bit worse than OEM
i almost got the matte cerakey set just out of curiosity to try it, but they don't have an option for split spacebar keys so that idea went out the window
Thats why glossy is better 
i tried the glossy, my sweaty sweaty ew ew hands don't like it
i already did that
And it didn’t rattle for you then?
No need to try cerakeys i already know it wont be like gmk
Looks like I’m going to buy plate and other accessories first
so basically my old stabs didnt rattle at all but the new ones do rattle even tho after i rebalanced them and lubes them as well
Hm
Cuz if new plate + cherry keycaps is sucks I will find another OEM Keycaps set or A-Set of cerakeys
Does oem sound deeper than cherry
yeah idk why
Yes
Send a sound test maybe
Just to see what we’re dealing with
No way
Very way
Fire= can burn
Yep
Much hot
@thorn zealot do you have a venom 60he ?
👍
What case do you have
Leggera g
And do you have the keysnap?
No I’m usin a 70a oring from cannonkeys
And do you think is worth it to buy the keysnap
Because i am living in Europe and the 3euro product cost me 23
ngl i want to see rgb on benom module
xD
Same for the case and i was thinking to buy tofu60 redux because is cheaper
No it’s just an alternative to oring
for leggera probably not that worth
for og frog mini it would be a nice alternative
Yeah I’d just stick with what you have
You’re not even paying for the product at that point
Just the box and you get a lil something inside 😭
If ur plannin to not cut the usb port off then u can get the redux since its cheaper for u
bro why this plastic sht cost me 10 times the original price wtf
I will wait and checked how much can cost me the case because is out of stock now
there is gonna be a venom rgb
how did you know that
yeah its going to have 1khz but rgb
geon was showing it on stream as well
Unusable
Unusable
Yes but more fps
Only in Minecraft
Literally has no impact on FPS unless you have dual core pentium shii
2015 joke 
really?
@sacred elm time him out

NAOW
thats how I see the rgb kids
you mean this one - 

Lame
RGB never worth
Especially when there’s a trade off lol
yeah on wooting you can at least run tachyon with some rgb if you must have it
GT-80 10% discount 
my switches are finally in the country from china 😭😭😭
Where did they post this?
Mate i hope so you are safe in uk because ur goverment went full 1984
I can’t watch porn but I can get some keyboard switches sent without issue, hopefully… If YunExpress didn’t fuck me over…
bro is edging to watch porn
This post was sponsored by NordVPN
prison for vpns😭
bro,
u have to go to the doctor
Daring today are we
expressvpn my beloved
And prison for Facebook posts
Mullvad vpn is not a snitch
Seems you gotta pick and choose what for
Hell nah
Express vpn is snitching btw
Tiger lite gaming realest
i’m not doing any illegal shit, i just can’t be bothered to go get mullvad or pia
lol
HAHAHHAHA
but it's not on the summer sale right?
I need to revive my X to start receiving barter offers
🥀
Yes
Only tofix version are
50usd btw
i can't wait for tofix he ver
on tofu tkl
their mech version wasn't that bad
i would love to know how their HE performs
The only MX pcb I’m currently interested in is for boly80
have they made the announcement?
uhh
nice
it's nice for people who want the holy but a big nono on HE
but I don't get it, why don't they just use odin75 pcb?
80he in an alternate universe where everybody uses 7u
Need
I would like to see more layout options from wooting
us?

Man all this excitement over a .75u delta
Dude let me find my post card
I will literally print that shit off and tape it on the side

You ok?
yeah look at these nerds thinking about keyboards all day
NO
Don't you throw that in my face 😭
The monkey paw curl. Nothing on the bottom row except for arrow key and 7u spacebar 80he. Plate mounted stab
My top pros haven’t progressed yet, ofc I’m not ok @cyan lark /s
I might have to use my postcard asking for more cable colours and options
Misdirected anger manifesting in 7u desires
I’ll make sure to note this in my card
“Do not listen to takmisser”
12u space or bust, go all in
I feel like you can just custom made a plate to do that lmao
Hypekeyboards will be my only hope
I always wanted 7u after trying it
Lander just gave me a render outlet
crooked 7u, no alt key. Still has arrow key, 80he
Why don’t u dummies just get the superior glove80
Huh, I figured 7u desire was mostly born out of aesthetics and symmetry
Which is fine, just didn't think there would be much special about using it
That’s how I feel about split space bar
Really? Split spacebar makes 3 buttons where there was 1, in a critical location.
(Well, the Wooting split)
-37% btw
https://kbdfans.com/products/ready-to-use-odin-75-hot-swap-keyboard-with-pbtfans-courage-red
Specs Case: Top aluminum, bottom aluminum Wired version PCB: Hot-swap version, Flex cut, without RGB effect, 1.2mm thickness Notes: Support VIA and VIAL(It is recommended to use VIA). VIAL's firmware is not official Plate: Polycarbonate and FR4 Structure: Leaf spring mount; 75% layout Interface: USB-C Translucent OLED
Ain’t nobody need that shii big dawg
I'm a function over form guy and I'm very curious about it
you don’t know how useful a split space bar is until you use one tbh
Yeah, I aim to find out.
You’ve been alive 70 years now and never needed it
they’re so good, great at work
why not have an ortho full 1u keyboard
I'm still mostly human
i love minesweeper
Really endearing yourself to me
Maybe if the left side space bar wasn’t so small I might care
I really really want to know the name of this keycaps
Can someone tell me ,I been looking for it for weeks
😭 I want to use this plastic case,but unsatisfied with the wt keycaps , this keycaps in the pic
Is the most suitable i think .😭
My English is poor ,so maybe I can’t express what I want to say correctly 😫 but I really want to know name of this keycaps
Do you know where the still was taken from
They look like keycaps you could probably find on Amazon or Aliexpress
Intro Hello good lads, this is my first keycap IC.This set was inspired by a keyboard friend of mine whose favorite shade of blue is Prussian Blue. He was looking forward to GMK Prussian Blue GB, but it got indefinitely postponed. To troll him, I started designing something with the same blue and a simple idea came to
W friend
You don’t own Fortnite don’t lie

W guess
Blood and wine my beloved
Which case do you have? If it's Tofu60 Redux, it is recommended to buy grounding sponge and place it near the USB port to ground the PCB
its the tofu60 redux cant i just screw the top right screw in to ground it? it will kinda destroy the feeling tho so i might get the sponge anyways
idk where to buy it tho and what to search up for
You can do that, but right side will be a bit stiffer than the left. It will still feel and sound better than screw-in
so its worth to buy it?
MECCANIXITY 200Pcs Faraday Conductive Fabric Foam Electrode Shielding Fabric Foam 10x10x3/5/8/10mm 4 Thickness with Adhesive Backing Sticky Strip for Computer LCD TV: Amazon.com: Industrial & Scientific
aight i found the same sponges just on german amazon
looking for some good key caps for my 80He, Nice style to it please. If anyone can send a link to some that would be awesome. Thank you
thank you :D
@sacred elm do yk where i should place the sponge when everything is delivered
Top left, so it touches the housing of the USB-C port
Just like this, near the USB port. You might have to scrape some paint there
@trail bane I submitted the idea 
When you put the PCB in the case, USB port should touch the sponge
aight
You get one? @stray tiger
?
7u booting or what?
aight tysm
Icic
It's a bit of a headache tbh but you got it 😆 If you are unsure about it just screw in the top right screw
The renders you posted this morning for the 7u 80HE
aight and what thickness of the sponge should i get 3, 5, 8 or 10mm
Not sure about that 🤷♂️
imma just do 5 cant go wrong with the middle
🫦
i need that 7u
Dropped this 👑
🫅
it would be cool if they gave us that option on the pcb
just like how split bar should have been
This is my tsangan moment







