#🔧│keyboard_modding
1 messages · Page 720 of 1
So I can just use it on my tofu case?
owlab was never a strap holder. They've always had a tab on the side for their whole recent era range
it's been their thing for all of the jelly lineup
Atk looks like want to be sued
🥰
anybody know some of the best 4mm HE switches rn? i got 3.5mm recently but still finding it a bit awkward
ok i still dont get it
Wait...
DrunkDeer’s Qians by Raesha probably.
As if the strap made sense in the first place.
Though raesha are not compatible with ks20
You haven’t seen the trailer?
Some are, some aren’t. Qians are though.
Epic 🦅 🔥
qians good stability, but same as polar pro with the sound - so just be warned if you care about sound
this didnt explain anything except being incredibly loud and clipped
Watch the whole thing, specifically at like 35sec
The loudness is part of the experience
🥰
ok so it just confirmed its still mounted to the stem
31*
if i go for thicker foam than the 80he stock foam, will that mess with any of the switches/pcb? (in the gt80 case, so not the stock wooting case)
hum?
and aligner, thank you for the UR ice studio ultra switch recommendations, absolutely loving them
should be fine IF it fits. Is there a reason you want thicker foam though?
thicker doesn't always equal deeper if that's your goal
Try polyfill instead of foam
The more compressed foam is, the more it sounds like silicone instead 😭
ohhhhh
whats polyfill? like what does it do to sound profile
Scraped some paint off the sponge location and test continuity from the case to the usb sleeve once everything is installed
It helps with hollow sound
and makes the sound cleaner
amen
ahhh, tbh i dont feel like my sound is hollow (apart from stabs but ordered stab kit and some dampening for the keys), just trying to deepen my sound profile however i can right now
Wait for new Lekker Tikken switches
i just bought new switches and a case 😭 , im dead broke and then i saw the new switches/kb announcement at work and i wanted to cry
They won't be out for a while
Polyfill is one of those cheap mods you can try, it mutes high frequencies and can make your keyboard sound a bit deeper
also mechanical foam switch pads won't work for he switches will they?
No, can mess with accuracy
ahhh okok thanks, might try the polyfill trick then, i can just go to a crafts store and buy any polyfill right? like theres not some specific type of polyfill i gotta buy?
Any polyfill will do the job
the wooting friction pad on my tofu60 redux case without the sponge
yes
is the sponge included?
No, I bought some off Amazon
MECCANIXITY 200Pcs Faraday Conductive Fabric Foam Electrode Shielding Fabric Foam 10x10x3/5/8/10mm 4 Thickness with Adhesive Backing Sticky Strip for Computer LCD TV: Amazon.com: Industrial & Scientific
its very unlikely to brake but it can happen right?
what would break it
there's no force that I can think of that will break the keyboard unless the case (unrelated) is grounded
gateron gold dragon just another recolored jade gaming
It's Friday, is Tikken here yet?
No but the gold Gade Gayming is here
Tikken are manufacture by who?
i need some clean white keycaps for my white build
Sir, my time is gold, do not waste it with Gateron news.
Classic BoW
kbdfans xray
not sure if this has been said anywhere etc but i'd guess hejin since lekker v2 is made by them and they seem to be the best manu for switches that arent too expensive and are good quality
Hejin, same manu as Owlab Ti
Nice
sander doesnt like the tikken
it's joever
Huh?
pretty sure he said they were to crunchy
@sweet oak lock in
Well he kinda ingested keyboard lube and milk mixed together
god's crunchiest warrior
cute jade, but it probably looks better on renders than irl
🧢
Did this work ?
Yes, I verified that the case was grounded by using a multimeter to check continuity from a section of the case to the usb port sheath.
edit: removed the parts where I was being a dick
Man I need a vacation
Does anyone have the elf king's switches
I think @trail bane does
Yep
does anyone know how thin the pet film under the 60he v2 switches is
How they fell and sound
I want a thock or creamy sound keyboard and idk which switches i can buy
Your best bet will be to wait on the Lekker Tikkens a bit longer. They are the closest to a creamy sounding switch out there atm.
For thocky, that's a bit tougher. There are so e deeper sounding switches but it's still not really thocky
For a creamy sound i was thinking of ur ice ultra or something like this
But thx guys for the help
UR ice is going to sound deeper than creamy from the sound tests I’ve seen on em.
Probably a good choice while waiting for tikkens if you want a new set to play with
Very thin, 0.1mm or so.
Have you tried comparing UR Ice Ultra and Lekker Tikkens? Im wondering if I the tikkens are worth the wait or a creamy sounding magnetic switch
I do not have the UR Ice Ultra sorry.
titon realest when?
They are in production. Wooting plans to release them before 60HE v2
shafie its me
Oh 😭
you made my morning good sir🌹
shafie too locked in to see
hes been everywhere modding like a chad
Man I don't know who's Froku
benom
@steady halo
maybe i should change the name to "goku - the super saiyan frog"
wait really?
ngl, i want to see if the "friction fit" fits the leggera T

I dont have a video of them but I do have UR ice. I really like the sound, the volume is a bit louder than my preference but I'm used to a case with hole that probably allow for sound to not be as loud (URs are comboed with pbt caps, 3 layers of foam, aluminum plate and case.)
i might consider purchasing the module and put it on my leggera T (if the prebuilt version is too expensive) 
great idea
nah, it wont be that much I hope
i could get leggera T with free carrying case and purchase the 60he v2 & tikkens
I also want leggera T for 60HE v2 but not sure if you can fit it in with friction pad
also you have to ground it, just in case
i might just use a single screw
on the spacebar i guess
or the middle one
I'm looking forward to the silver version of the 60HEv2 to complement my RAW 80HE
Looking forward to putting my 60he v2 in the salvation
Silver really is the way to go 🥶
Wish it fit in the neo 60cu but daughterboard requirements and usb port placements say no
Big man cam stays on top
Senpai, look at all these kwul games you can play on me 😳👉👈
#wooting #keyboard #gamingkeyboard #hekeyboard #halleffect #uwu #osu! #rhythmgames #geometrydash #fridaynightfunkin #musedash
Spazza missed opurtinity to play og doom with two uwus
- Neither
Thats the bottom of the case so you're probably not going to see it often anyways
where do u guys buy straps
A lot of people have found them on Etsy but I also think there are some of the Asian marketplaces like TB or AliExpress
the start of the 80he 
i have to take my keyboard apart soon to install my dupe holy60 and some new keycaps and a cable, what mods should i do while im at it?
Lube/tune your stabs
Yt has tons of tutorials
you will never beat the original scholar of the titon
😭 lubing takes toooo looooonggggggg :((((((
Its just your stabs
Takes like 10-15m
Gn



you say im not that guy but i fooled shafie :p
@tawdry tree
Orsh*t and Orsh*t Raws 😃:thumbsup:
Higher pitched than Jade Gamings 💔🥀⛓️💥
If only Genty’s top housing dampened the sound..
😭
I’m still gonna try it
well that's not very interesting. Jade gaming were pretty average box stem feel and sound
If it’s cleaner, might be interesting
okay waiting for the next big switch then
Yikes
Gateron will do anything but improve the Jade gaming for it to be an interesting competitor sound wise
Worst person you know just fumbled the bag
Yeah looks amazing
Cool thing is you will be able to just swap the mon in the future
I hope they make some for other Pokemon too. I was looking for interesting practical lights to put into background of video shots. I’d totally buy a charizard one or generic Pokeball lamp
Personally i’d prefer mew or mewtwo but im probably gonna get it cause gengar looks too sick
they are also making a mew one along side the gengar
Did they say when that one will release?
dont think so
Mew is much more iconic to the original base set pokemon folk
That’s pretty neat
Seems the core is replaceable in early designs
If so that’s very neat
So you can swap between the pokemon in the middle
Yeah that’s the plan
You just have to buy the lamp once
Then you can replace the core
But they def gonna release masterball lamp etc
I regret not buying one of the master ball keycap holders
Sparks 🧨 and Titons?
Jade “Gaming”, sound was never a consideration 😭
Where's the Mewtwo one
i need umbreon
There’s no way, afk gen chat

What wooting compatible switch feels most like the original gateron red switch?
Any mx stem switch?
There's something that feels so crap about the common hall effect switches
Specifically the lekkers
I think it might be the lack of stem wobble, which makes travel distance feel like shit.
Also you should take a look at lekker tikken(release
), elf kings
Which switches have you tried?
I've tried drunkdeer switches, lekker 45s, lekker 60s.
Try Owlab Ti
Tried poop shit and fart
@stray tiger . Pulled the trigger on these, figure you might be interested for your collection.
now you need some strawberry keycaps king
Haha pairing them is going to be fun for sure 
lmk if you need any keycap ideas 
the kol looks like very cursed ground beef
I bought one as well to go with my bingsu board
Haha that was one of the sets I was contemplating on too. Sweet!
I have been slowly acquiring older caps while I try and finish out the Neurokolks
now you need to make a board out of them

not responsible for potential bankruptcy
Full knob 2HE realest
going to be the most expensive wooting build ever
Looks like
i need a good accent key, but don’t know where to get one 
one of my pillows just ripped
so yk what i had to do
PILLOW FOAM KEYBOARRRRRDDDDD
sounds hella thock ngl

alright now try kinetic sand and make a tiktok
hipyotech vibes
Oh shit I forgot to tell you guys IT FINALLY HAPPENED
Nice nice
Finally you got the keyboard
thats how some of my friends got their GPUs lol
I missed a sale on the normal exchange last week and then the naval exchange came through yesterday with some stock
i just watch ztt's video on that lmao
anyone know where i can find orange keycaps to buy like white and orange or black and orange
Embark on a journey to the red planet with CYL Mars Cadet! A clean palette of gray and white explodes with vibrant martian orange in this exploratory mission inspired keycap set. Featuring the 'cadet' legends, Mars Cadet brings its own martian twist to the popular Symbolics Space Cadet theme. Extend your set with the C
Link?
holy shii
time to join the navy and snipe thockfather's package

MOMOKA Sugar Orange Keycaps are originally designed. They have an OEM profile, suitable for MX switches. 134 Keys Incl.
Aight Shafie when are you getting big GMK 
You can’t be using default caps on PCr forever 😭
once that wooting paycheck comes in

no gmk 
Dawg you have to get cosmos
I’ll take back what I said about optimum case if you do 
Don't lead our shafie right into a mistake
He’s going optimum with blanks and isn’t going cosmos, he’s not locked
Shf doesn’t listen to me it’s fine 🥀
I mean, Cosmos is BoB
PBTfans lyla will do the job, I just need some dandruff

Maybe shf will take milktooth’s top 5 marbly switches surely
clack above all else
Titon
Yes, but Titon when
attack on titon realest
Sad
Big Grey wins again
WoW realest
Any cases out there like the Tofu60 redux with a 4 degree typing angle?
are you scared about the 12pin connector?
I am running a 5080 now and it has been fine so I am crossing my fingers I will be ok.
i shall prayge for you father
i been looking at 5080 too but i feel like the 12pin connector issues would make me paranoid
"me constantly checking if its alright
"
been seeing some deals then and there
this is cad not usd btw
You’ll be checking for like 2 weeks and prob not care after tbh
Im waiting for 60 series with my 4080 but i cant help myself from looking at 5090s
60 series should be waiting for you after the 50 series 🤣
probably right im just be cautious because i got pets and other people here and worried about gpu catching on fire
i have a 3080 and never thought once about that issue but with 5080 its different
4080 is 12 pin too no?
Hope your smoke detectors are up to date chiirp
It is
i actually had my co2 alarm go off last year while i was sleeping
did you ever had problems?
@tropic urchin i was lucky i got all my kitties out. Theyre safe and sound 
Then you can bap the slowest for not following the leader 
0 problems personally, using a corsair adapter for my psu and never had melting
you got asus gpu no?
(My psu is also corsair just so people dont freak tf out)
Gigabyte
gigabyte has a nice white gpu
Personally for my next one ill either go a better looking gigabyte or an msi/asus model
i was thinking of getting the white 5080 msi is the price drops. But i gotta wait for black friday sales to decide what gpu to get either 9070 xt or 5080
i love my asus rog but msi warranty came clutch for me and provided me a new mobo when i needed one
also heard asus warranty and customer service sucks
i want to try gigabyte but i hear mix reviews about them
Id probably be more likely to get an msi if they put their dragon logo on the left side of the backplate rather than on the right
yeah i agree with that
non rgb model has this
the ventus
True
the suprim also doesnt have it
Forget what cable I ended up using but replaced default for a white one 🌹
i just know if i go a 90 class i have to also beef up my psu lol
MSI dragon is tuff
that is what im sayin
Extra crunchy
the cute version is even crunchier
i want them to put a dragon that spans the side where they usually put those cringe displays or rgb
My 4090 been fine for bout 2 years now, you should be good
it's kinda RNG tho, just make sure it's fully seated and flush with the socket (I'm sure you know)
constantly checking makes it worse
increase chances for error/melting
youre right
i heard asus software tells you if all the pins are properly connected which is pretty cool
imo
Yeah I have an asus card
i've been looking for 9070xt so hard
it reads the voltage going thru the pins
discount would make me cop that card
me too but the prices here increased and i seen some sales on 5080
i would hope its reliable
if the price is similar to msrp, it would be the best price to performance
Right lol
you got 5080 or 5090 cam?
Neither just 4090
yeah for sure
I'm outdated
and idk, if nvidia fix their nvidia drivers for linux
Yeah I mean the only thing it doesn't have is 4x FG
just 2x
but you can do 4x with lossless scaling if you really wanted too
but LS is inferior to DLSS FG imo
it has its use cases tho
esp for fps capped games, typically older games
i miss my 4090, even though i'm playing every game on the lowest graphics there is (it was really overkill)
😦
and 5090 is only about 20-30% faster than 4090
any tips for using medium or high graphics on games?
the issue is not that it is "only" that amount faster

the issue is that it isn't any more efficient
That too
uses more power
would be nicer if it was 20-30% faster while using less power but still not a big generational leap
its basically a 4090ti
What do you mean by tips? Like best settings? It's all gonna come down to your system and what your preferences are
noooo, I can't get myself to love playing games on high graphics
yep,
i could say i was wasting my money on 3090 because i keep playing games on the lowest settings

yep, but can't get myself to enjoy playing it
yep
idk because of my habit of playing OG games or such
i get myself to love the lowest graphic i can have (not until unplayable)
like less shadows and such
Do you just want high fps or you prefer the way lower graphics look?
thats the neat part, either you can run it or you cant
i think...
i prefer
the lower graphics look
Interesting
Yeah I mean everyone is different and has their preferences lol
I like modding graphics in games a lot so I can get photos like this
i cant see any pixels its too high!!!!!!
i feel like upgrading from a 3080 to 5080 would be a better jump then switching to 9070 xt but that 9070xt price is to appealing to ignore
too*

Yeah I mean the 9070xt is pretty decent but 5080 would be better
thank you good sir 🧐
yeah its just the 2k price point
anyways i wont be upgrading till black friday unless a sale randomly drops that i cant resist
Yeah try to get it on sale if you can
yeah i been eyeing to do an all white build but the prices rn are whack
I mean, if you're patient and save up, can build the pc you want
and try to get deals on parts
Yea colormatching white is much harder
its just me justifying paying those prices but i'll have to wait and see for sales
like this gpu so nice but look at the price 💀
cad 🥀
Thought so
usd is like 829
Yeah way better but still
That's still crazy
this is usd
cad
Crazy
MSI is now in on white GPU build???????
im still waiting for the white asus
they made a video about it
white astral or something else
ASUS GeForce RTX 50 White Editions are here! So fresh, so clean, so ready to dominate. Your build deserves this level of aesthetic perfection. Stay Frosty and Play Flawlessly!
Learn more: http://rog.gg/RTX50
all their lines
im mad they didnt do it for the asus tuff 9070 xt
or else i would get that shit in a heart beat if the price was good
why did they go all out for the color with their 30 series but then abandon it going forwards
I liked the Gigabyte Aero cards
bros hitting hard at 7 PM on a saturday
i never had gigabyte but it does look nice
i almost got the 3080 white gundam one but it sold out so quick

Gotta get you one of them HOF cards
30 series was so fucked
i wanted a white strix card so bad but had to go all out for the FE
had to side step all the zotac and other cards and wait for the FE since everything was on giga back order
there was this guy streaming on twitch that had his own bot set up to announce when cards dropped on 9 diff sites
bro was him
I was sitting in it waiting for drops
Colors became less popular, MORE MODERNIZATION PLEASE I NEED MY GREYS WHITES AND CARBON BLACK NO COLOR ALLOWED
grey is so lame
But its all thats left 
pretty soon we're going to have an optimum color inspired PC that everyone is going to copy
not wrong, but its so fucking lame
Agreed
im of the opinion grey is better served on clothes but that prob will start a war 
Id like more variety for sure
That arent tied to collaborations mind you
Only MSI really has different colors, with the tan like color ones
Fashion is cyclical, colors will come back
Eventually yes
Someday, a movie with the color yellow will come out and it'll be the top color of the month
i was lucky and got an asus rog strix 3080 12gb
i would have got 10gb but 12 gb is all they had
so pretty
i know when i found out they got rid of the rog line i cried

the 4080 rog looks nice as well
but with astral its still not bad but it aint rog 🥀
My system has been really stable lately with the 5080 and I've got a really good overclock on it, so I hope the 5090 is a good improvement.
lets prayge for father to have good performance 
Ok ok but what do you think about AMD cards
the 9070 xt are good
I buy the 7900xt and 4months later they drop the 9000series
but honestly for the games i play this is enough
Are you getting 4060 for physx?
wooting 80he plate is pc plate right?
Yes
Who still plays physx games?
Lots of people, I'd bet
Well if you would like to play them
how would swapping it to an fr4 plate do? like to the sound?
Wouldnt it be nice having normal framerate not like 5fps?
Does CS2 use PhysX?
https://www.pcgamingwiki.com/wiki/List_of_games_that_support_Nvidia_PhysX
Doesn't look like it
Then I'm good!
buying a dedicated gpu for physX is crazy work
I did make a mistake today and bought 3 GMK sets at a really good discount and I don't really want any of them lol
damn, you gonna pick up that MTNU set you were debating
Nah these were much older sets that I never owned and was curious. I think I paid around $70 each after shipping and PayPal fees so shouldn't be too hard to flip if I don't like them.
To be clear, it's not that I didn't want them, I just don't see myself owning a blue or purple board anytime soon and they are either blue or purple based sets
not bad, I've been tempted by some of the deals recently but have not been swayed yet!
Well the worst part is I'm sure all of them are going to be the older style boxes and I've been trying to get rid of all of those so they will probably be flipped quickly
yeah the shelf stack doesn't look so clean with the mix between old and new
anyone here has experience with HE switches and SA keycaps?
i feel like SA keycaps kind of cause an unwanted echo esp w HE switches bottoming out
or am i just crazy
They are a deeper keycap so that's possible but this usually doesn't happen with quality keycaps and is more prone to very thin SA keycaps
Well because 50 series do not support physx
Finally upgraded my old GTX 1080, I have a 9070 XT now, since couple days
they are dye sub pbt 1.4mm thick
i thought that was considered decently enough? or is that considered thin?
Hey Father, how is everything going?
1.4mm thick isn't ridiculously thin but a lot of your quality stuff will be around 1.6-1.7mm
Heya doing good! How are you?
ahhhhhh damn, so just confirming my knowledge, SA keycaps tend to be the best for a deeper sound right?
Yes
All good, rocking a new GPU, also looking for a new headset, regarding keyboards just waiting for the 60HEv2 module when the time comes
also how do you guys find out the thickness of keycaps? ive found when ive went keycap shopping, most dont tell me how thick it is, it just says "thick doubleshot pbt" or etc
Congrats on the new GPU, I ordered a new one myself yesterday! Also waiting on the V2 🙂
What did you pick?
And thanks!!!
A lot of good brands will tell you. If they don't say, odds are they aren't very thick.
Grabbed a 5090 FE after trying to snag one for 4+ months now
Top of the line, congrats!!! 🎉
ahhh okok thank you!!, and if i could just ask one last question, whats realistically the difference between double shot/dye sub and abs and pbt? in sound profile wise
If profile and thickness are the same, PBT will be a little less high pitched than ABS. Not a big difference between dye sub and double shot in terms of sound.
Snagged one through the Navy Exchange of all places. Finally a good veterans benefit and it saved me sales tax
ahhhhh gotcha gotcha, appreciate it !!
I want to get a new set of keycaps, but still have plenty of time, the headset is more urgent and then my garmin watch died, time to refresh stuff
9070 xt supports physx well no?
Did not check and I got one 🙂
im pretty sure it does
Right and which games do you need PhysX on in 2025?
Getting a dedicated 4060 so you can play borderlands 2 with PhysX enabled is the crazy part 
Nice dude. Congrats
People used to buy a dedicated PhysX card back in the day, right? Almost 20 years ago
lol ez
Well newer card = longer support
I still remember having a voodoo card lol
I remember ATI, and only reading about voodoo
I dont think so i had voodoo
And vodoo was never a gpu card
It was like addon to gpu to do heavy stuff
He said add-on card, which is what that was
Did Nvidia bought them? The whole company
Thats why we had sli
Having a dedicated gpu is nice
And if people already do that they can also use AI with it
Well not being able to play old games is not nice
Well technicly we can use workstation gpu with physx support
Enjoy the night guys, talk to you tomorrow!
well you can still play the game just with no PhysX on like how AMD cards have to play since release but why would you bother when it's only in two games that came out 10+ years ago that are still actually played sometimes by some people
Well if you want play old games it would be nice playing them without issues
I wish CPU was able to calculate physics
maybe it can get readded in 60 series as the main feature ☝️ 🤓
They could probably add some kind of translation layer from 64 bit cuda to 32 but to add support that way
But on CPU it wouldn't be able to handle that
Cpu cant into physx
cyber punk 2077
it's not like you can't run the game without it
Cpu physx is horrible
technically most of physx is run on the CPU
nvidia just wants to make sure that it stays exclusive to them
I know I'm late to this convo lol
but this is the list of games you would need to be concerned about if playing with 50 series, not really games to worry about lol
Wasnt this list bigger?
Not sure, this is as of Feb 2025
Yeah but some of these games utilize CPU PhysX without issues
whereas some games utilize GPU PhysX which would have issues
Like Witcher 3 for example
Uses CPU PhysX just fine without performance hit
Issue is games that run mainly on gpu physx
sucks that support is dropped for PhysX on those games but at the same time nobody is buying a secondary card to just play those titles
Nah, not unless they really wanted too
if you play an old game like that its fine just to disable physx
I mean, people disabled PhysX in Mirrors Edge back in the day cause it had issues
exactly all AMD/Intel users already play those games the exact same way
Well not having fancy physx features well..
yup just like all those on non Nvidia cards
Remember time when hairworks was demanding
Dude hairworks was so broken
I didnt Notice it
i just got a sayodevice for getting into osu and it has no side cutouts for clips LOL @tawdry tree
ts so buns
pmo
can u help me by finding key caps looks like this
no because any set that would have them would not have them on the correct rows
extremely unlikely you'll find a set that you like and that has those keycaps at all, let alone those keycaps on the correct rows
you can order a custom keycap set with that print but the quality of those is meh
ok where ?
wasdkeyboards used to make them and I think yuzukeycaps or something like that
use google, idk
ok thx
i just realized the gasket on the 80he is the silicon layer and not on the plate with socks like other common boards
is this an HE limitation decision?
other HE boards like venom tkl has the tabs on the plate
gaskets come in a lot of styles and varieties
for he boards though they all tend to limit the bounce in the middle regardless of what gasket they pick, because super bouncy mid flex gasket performs horrible for HE accuracy
that's why wooting opted for a much more stiff gasket that's mostly about isolation more than bounce
yea from what i saw the boards that offer tabs on plate are alu and fr4
ive seen diy builds with the venom tkl but that gets into unsupported territory ig
aren’t side cutouts a thing so that a switch can be opened while it’s still in the board? Why’d you want that?
can anyone with geon raw 40g and duhuk herz comment on the weight? they both have similar bottom out at 40-42g but the initial force listed is 27 on raws to 35 on herz
Must Tikken wait for the 60v2?
No
we will wait for titon until morale improves
realest
witcher 3 is gpu physX?

the giga chad is typing
Oh didn't think you'd notice.
@stray tiger PP plate has won the Mexican “preparing for shipment” standoff
Before top pros is crazy bc it’s most recent 😭
W tom
Arriving Thursday 👀
"i been a nasty girl"
"more energy chi chi!"
for what pcb
80HE

Might try for benom but prefer owlabs on there
And geon alu plate is pretty good sound and feel
herz big W
PP plate + fluxies and new PBTFans PBT set build on GT80
Is ze build
Depends on the keycaps
Current fav
Can’t find literally no any cool white sets
New version of Flux is coming out that reduces the GS
Are those replacing the alphas currently in your cerakey build?
Idk maybe i’ll just sell my cerakeys
Damn
Just because they’re not that good with HE board as I expected
You should be able to find more white sets if you try to target sets with more color
I would like to change my wooting keycaps, I currently have the basic black ones. Does anyone know where I can buy them? some red anime would be perfect. Thanks in advance
If you want anime keycaps, you can probably find them on AliExpress. Keep in mind that keycaps on Ali aren't the best quality.
you can find some kinda cool red ones, but any anime keycaps from like amazon/ali aren't going to be great quality wise
Nothin💔
I mean you might find an equal amounts of cream alphas but nothin is crazy
I mean there’s a lot of white keycaps but they look to generic
most are going to be generic unless you get colorful legends, but thats really it
Ready for recommendations 
could try to find some if im bored enough, any deal breakers ahead of time
ABS/PBT?
complicated, simple?
alot of power you have given me mr lander

also just realized 6 days ago marked my 1 year anniversary of buying booting
calibration: Yay or nay for alpha color
Only 3 years of barranty left🥀
ermm technically 3 years and 4 months since it arrived in December

yay or nay
Erm Sir this looks sick but i have yellow and white boly case
calibration test mr lander
In other case yay
you have any particular side key colors you want
TBH
if you're going white and yellow holy80
you might as well just get cream keycaps
you're already half way there
Actually yeah
GMK Dragon Witch is a good contender if you like the novelties/purple
I want order copper plate 
this could kinda cook
i actually like this alot
it is a little cream/tan but yeeesh
I’ll need to do some tweaking in Photoshop to see how well they fit
will you be getting a knob for your holy80 when those come out?
if so a mix of white/yellow maybe gold/black could work
technically not what you wanted for alphas, but this could also work from a top down view depending on how much you like red lander
Goated purple set (dragon witch sans novelties)
Maybe, depends on amount of 9
$9(9).99
i pray to god its not 99 for either knob, that seems like alot
Can predict the price will starts from around 30usd
that sounds good to me
GMK Abyssal also cool if you like underwater/dark blue side key aesthetic
And use cerakey as artisan 
not a bad play
are gmk clone sets frowned upon if mentioned in here?
not frowned upon, but you're just not going to get the same quality keycaps as if you got authentic
if that doesnt matter to you then get em
ah ok, and hey you will always miss out on quality not buying authentic
yeah thats why ive never personally tried/try to discourage from getting them since they're very cheap compared to the originals, but prob gonna get some UV print shit instead
clone civilization set since you mentioned white alphas
Civilization has some nice white too
Good old days with blone gmk first love 
nice set too if you like blue
I like that
kinda similar to my GMK Lazurite sans novelties
thats the gameboy keycaps no?
that idk
nvm its different
fellow keeb chatters what do we think on the rainy75 keyboard?
@tropic urchin have you forgotten about the purple cosmos gmk set? 
forgot how its called
burple
Oh you mean the ic that hasn’t updated since February 😭
@calm pulsar
Partially why I went salt lakes bc this shit is chalked
we will get gta 6 before this set
That’s cuz we not getting that set prob
Dead set

you should still be able to find something 2nd hand per chance but might take some digging
idk i'm not too confident
probably will have some markup but should still be doable with enough looking
i'm not too interested in paying more than 150 euro for a set rn
and just from a quick look i couldnt find something right away
no it's violet on cream
Anyone got the KOM POM switches
12.7K likes, 70 comments. “I’ve always loved frogs in magical forests, so I turned themand their little house into clickers!🐸🍄 These are definitely some of my favorite designs so far. I’m really enjoying creating more detailed 3D-style pieces! If you’d like to print them with your 3D printer, the files are available on my Patreon, ...
does anyone know what keywords i should use to search for that one sheet made by a drunkdeer dev that includes
info about a lot of HE boards ?
does anyone have that sheet on hand?
now u gotta get em
Oh, that's different
I thought you wanted this
That is very outdated
Nah cpu
thank god
i still have to play that game
been collecting dust in my library for 4 years
Yeah it’s one of the best, I’ve been doing a playthrough of it again fully modded and trying to 100% everything
Do the wooting kom pom switches come pre lubed
Yes but not a lot
Thank you
KOM just puts 3 dots of lube on the bottom housing
is it possible to make going to another wooting layer a toggle isntead of having to hold
Definitely plan to self lube
self lube
i never played it
but probably going to now since i need a game to entertain me for a bit till i upgrade
Something colourful? Like purple and pink high quality
check out pbt fans they have high quality keycaps and I think a few purple and pink variants https://kbdfans.com/collections/keycaps
check out osume https://osume.com/collections/all-keycaps or GMK caps from various vendors you can find here: https://www.alexotos.com/keyboard-vendor-list/ The vendor i would recommend here is oblotzky industries https://oblotzky.industries/ because they have lots of selection and pictures right on the home page. Otherwise you can also check out pbtfans as mentioned above
Discord Server (For Updates and GB): https://discord.gg/waifuworks
Hey everyone! I am once again thrilled to show my latest project— a premium keyboard inspired by Morgan le Fay from the Fate series. With this design, I aimed to embody Morgan’s powerful yet elegant aura. Manufactured by Dadesin for top-tier quality, the board features a pol...
Damn this one spenny keyboard
god damn
Weeb tax is heavy
price like that, it better be full copper, gold plated
My copper keeb cost half that
Well was closer to $800 with the accessories I got
Does anyone know if the 80 HE and the premium cable set are compatible? I imagine that they are but just want to double check
they are, if you mean the wooting cable
Yea the premium one from wootings website
Welcome back from the study hole, Cam
Yeah get whichever color looks good, if you haven’t gotten yours yet should come with a default color one
I have the 60 and rocking the stealth version atm
Really want to get another connector so I just unplug and swap between the two as I please
Thanks, still got exams coming up, just doing my labs about 3x over to build the intuition and remember stuff
What you studying up for?
IT
Gotta land that $280,000/year Top Security Clearance Government job
Don't set your sights so low
with that job surely cam could get the centerpiece when it drops in 2029
You right
and by 2029 housing is going to become even more expensive, so all salary will go towards pc build and keyboards
then he could take up digital carpentry and build a house (in minecraft)
The worst investment advice since NFTs 🥀
compared to NFTs, you can at least make use of a house in minecraft
I was talking about buying a centerpiece
Minecraft is real business
ah mb
thought you tagged diff message
Centerpiece is the chosen keyboard of Minecraft pros because nihilism rules and nothing matters
Will also be fun when someone inevitably runs doom on it
OK if it can be a self-contained Doom runner/player I'll give it its kudos
chat what is the thockiest doomiest keyboard
My keyboard on Thursday
you got benom?
Yes, but PP plate for 80HE
Hoping PP plate completes the Marbly build
all the cool kids have a venom😎
rainy75 seems quite close to a 80he in terms of overall look and layout, maybe try a 60% 7u venom
so you get something diff compared to your wooting
thats just my thinking ofc
if you're getting a second board might as well be something entirely different
@harsh dove tribute to the PP fluxies original testing 👌🏼
rich coming from me given I had 4 60% pcbs at one point, 2 wootings and 2 venoms😂
yeah you right
thx for looking out cuh 
Ye can vouch get 7u
Then you’ll be mad when you go back it’s not 7u
🤣
7u my beloved
might be complicated to deal with keys on the right side of the spacebar in its layout I think
Those keys don’t exist anyway so it’s fine

like those old keyboards in stalker with spacebar only
Sacrifices must be made before we can secure our birthright @calm pulsar 
sounds like a quote from a Miyazaki's game
TBC trailer/cinematic 🤓
@tropic urchin you can try a similar colored number row with your set too
Yeah I’m gonna try to do something like that for numbers
Then try to taper the other rows too
It took me 3-4 tries to perfect lazurite so I’m expecting a few tries with more color complexity changing
Might look better with 50/50 split
duality of man
The solid color keys look sick and white alphas with colored legends are also sick
Mix and match all of them and joshibasan is about to leave
Again

My other 7u beloved
Yeah
Where my symbols 
fwog
btw @harsh dove have you seen Geon made new thingies to alternate the mounting in the frog mini, called Keysnap
really want to try em
compare to tadpoles
if you're getting 7u venom, you need a 7u plate, geon sells fr4 and alu
then you need a compatible case, which could be almost any cases working with a 60he wooting, but one of the nicest would be frog leggera
venom can work with frog leggera G, gummy mount version, and you would use it with a dauthgerboard that is included with the case
carbon feeber
and cooper
ah yeah theres more materials for these
Hot 🔥
yeah i want to try out 7u
i'll do more research and come back when i have more questions
i would get the frog leggera case
havent decided what colour though
black looks nice
yeah in that case frog leggera g, venom 7u and a compatible venom 7u plate is a nice package that you can get from geon fully, or aliexpress as an alternative
i see theres mx pcb and regular 60he
you mean venom? yeah there's an mx venom too
yeah
im looking on geon website right now
im running a pc plate from wooting on my tofu build. What plate do you recommend for the venom 7u
im a fan of fr4 for my frog, but its not leggera, so maybe @fluid ravine can advise
is fr4 plate harder than steel plate?
it's also more of a dense plate, but not as hard as steel
I'd say it is probably the softest sounding while still being on harder end like alu or carbon fiber
thank you giga chad arc
🌹
Is a copper plate cool?
Fr4 softer than alu but still hard?
Do i need more plates??
imo it's softer on sound, but in terms of how easy it is to bend, its still in the ballpark of plates that are not plastic (alu, cf etc)
I guess steel? not sure about copper, but maybe it's dense af too
Probably cf for pure stiffness
CF
Wait the venom pcb doesnt have rgb? How am i suppose to show off I'm a fortnite pro? 
Mouse RGB
RGB Mousepad
watching someone build a venom keyboard with the optimum case and dual shot 2 set
i was just joking about the rgb
I am also joking
mmm, like match made i heaven
i want to see this set on the 60v2 silver case
i cant wait any longer !!!!
i been watching some videos and im wondering why people are replacing the wooting module for the venom module
is it just because of 8kHz polling rate?
mostly format more than anything else
the mech enthusiast crowd like the tsangan layout a lot
yeah 8khz is not really noticeable, but mainly it's the layout and the pcb having a daughterboard, which allows it to be installed in more cases
is that the grey frog mini or black?
kinda looks like black here
yeah you right
im been debating which version of the set to get regular or katakana version
go for benom
buy benom
benom supremacy
feel like the katakana is nice but theres so much going on that maybe regular looks better. Decisions... Decisions🤔
i prefer the regular looks
benom
always
check ur dm
@tulip rapids lovely right?
idk, I don't want my secret to be revealed
the venom has the venom
now
my identity
is revealed
nooooo

okok i'll delete it
wait what keycaps are these, i love the look here
thank you papa Goku
local keycaps, nfs for international market
shiii
ohhh tyty
what about the rgb bro




