#🔧│keyboard_modding
1 messages · Page 713 of 1
stuck in the past
The trigger is actually a part in the switch that allows it to scream at you
beonworks baptor be b2
lol nah I’m going to sell it
they're like "mx better"
ball effect
I’m sure the buyer is fine with that
What are u even selling? 60HE?
traitor!
damn the first ones are ugly af
would prob go with the first one (assuming they’re shine-through).
use wob
Only side print are shine through
all others aren’t shine-through lil bro, he’s never selling it if not for RGB
yeah good
get rid of that set
and make someone happy
I’ll probably toss all three in the box with sale lol
ehh might be true, I did sell my og 60he with stock caps too
with badly lit front printed rgb
And wrist rest
Lolz
where did u even get those sets from?
and why?

Well for a bit I was insistent I needed side print
And then wanted black on black
Then wanted SA profile
So I bought some random cheap shits
brother couldn't find the capslock key cause no legends
i don't want to alarm you but there seems to be a random tripod on your desk
surellyyyyyy
Your N and M keycaps are swapped


@stray tiger You gonna get Pesante? 
Negative. Not a fan of the 8 degree typing angle and after shipping and tariffs/duties/brokerage fees it would be $500 or more.
I do like the color though! I'm sure it'll be a great case but I'd still rather grab an OG Frog Mini when they pop up for under $300
@polar girder how are you feeling about the cherry love set
What keycaps are those?
When will this be out? 😁
October
I hope the OG frog mini comes back one day 😭
it's alright
i really dont get the appeal of hhkb layout, why would you ever want that space free and not used for ctrl
I believe it’s for Linux vim programming
herz herz herz
some retro boards dont even have alts, it all stems from older layouts
plus on hhkb ctrl is used on the capslock key
but now among keyboard hobbyists it's mosty for style
I want my holy wkl
herz
Did someone say vim 👂
I’m nano side
Control where caps lock is normally is the way
:wq
Redline ftw
sudo rm -rf/*
password
few seconds later:
^C
Ctrl is clutching ts

Don’t care tbh
Some random double shot side print
sudo rm -rf --no-preserve-root / ✨
#CSNerds is leaking 
Update for @tropic urchin
I did listen
Just swapped to the jades, looking forward to trying tracking w/ them
donut
Worst case if you do need the lil coaster skate by the sensor, you can just get a jade skate for it since it should come with its own
Not a fan of whatever lamzu’s stock skates were
Seems like it's fine w/out the sensor pad. Feeling pretty sweet.
I’m trying out TJ plastix skates and I’ve never had something feel moderately fast with such stopping power before 🫦
those skates will get cooked soon on glass
Haven’t even put them on Kazemi yet (made for glass), but they feel crazy on cloth
@gaunt plume https://item.taobao.com/item.htm?id=873338181118 OKT clear switch
The jades or plastix?
Worst case you can remove the donuts and you can have mini dots 
jade max was so good they made jade max 2
Now this is pod racing
It's sold out😭😭
Damn!
@glacial wind is there is any new switches wich should i get?
Considering to buy haimu silent, ws flux, polaris pro
well haimu silent isn't anything new from looks of it so unless you just want silent switch i don't think it's that interesting to buy
i think one of any of the split stems is a good buy just to try out and see how you like it - i think they all sound awful, but their stability is very cool
gateron has some split stems coming soon, then there's polar pro as well and the jerrzi's as well, also drunkdeers variant
does it sounds worse compared to pom when hand lubed?
nothing fixes it. Hand lubing makes it a bit better but you always get a bit of that weird muted lekker v1 type sound left
Yeah probably cause its not one piece 
yeah i don't think there's a way to actually solve the sound issue, at least not with the existing variants
They need to reengineer all of it so it sounds good again
That just means sticking with TTC KOM/POM
The issue is probably coming from the fact that the bottom part of the stem hits the top part of the stem and the bottom of the switch at the same time
i'll still use mine in my main board for gaming, but it's a tough recommend when i know almost no one is going to want to hand lube an entire set of these to get to even close to okay sound
Also yeah they are expensive, hard to mod/lube due to extra parts and sound worse 😭
i do think round type stems may be the future though, at least for stable switches
it hides the feeling of the walls a lot better
Just gonna stick to my rawhuks for now
Until lekker tikkens are out and then i‘ll see what i prefer on my 80he
Same, sticking with owlab until either tikken or something better
my problem with box stems has always been you can always feel the stem in some way, but with the round type box stems i don't feel it
If i end up liking the lekker tikken more i‘ll just throw the rawhuks into my 60he v2
I kinda wanna try a round stem but not split
Ttc should make their silent switch round stem
because both the flux and polar pro have that same feel i'm inclined to believe you don't need any of the fancy other tech and it's more on the round-ness of the stem than all the other random stuff personally
Ttc should lube their switches better, make them cheaper and then give them to me for free
but that's just a guess until i try more round stems
gateron are selling the sparks soon, you should defo get on it
i'm more curious on round stems now using just normal stem structure
since we know gateron's spark seem to just be almost same thing as the other split stems with just changing to enclosing the stem area more
Octagonal?
We need ttc pom x wuque flux (with ttc doing all the work using flux design)
spark is so damn expensive
i wonder what would even go well with that brass pessante for a plate theres so little to find on a case like that
alu/fr4/carbonfiber/copper, idk honestly. cant find much about any sort of combinations
3 dollar switch?
or 4 dollar switch
What do you mean by duplicate? Like counterfeit? I doubt anyone counterfeits those honestly lol
Ok good to know
If you're buying from a trusted vendor it should all be original unless stated
yep, logo down
it's kinda a plug and forget switch. You can take off your keyboard and unscrew the plate off to push the switches off the plate
Yes, they are hard to remove
Just very tight tolerances
So it requires the might of God himself to pull it out. If you’re using the Wooting switch puller, you might as well just break it and use your fingers at that point
raws broke my wooting puller
Before I had my Wuque puller I only got 2 switches out with the Wooting one
I had to use my Rog Azoth puller for the rest 😭
Holy shit that was an ass experience
If I'm doing a whole board swap I'll take the board apart and then pull switches
Is building a keyboard easy🙏
Wooting has building and deconstructing guides on their YouTube. It’s pretty easy even as a modding novice if you follow their guide.
https://rakka.dev/docs/the-meaning-of-parameters-and-specs damn ts is actually good
DEFINE THE LIMIT. RAKKA – a team dedicated to delivering high-performance, high-quality keyboards.
all "Wooting killer" and 0.0000000000001mm fanboys should read this
Not reading all that chief
I can’t even read as it is, so that’s a few steps above my pay grade
NA education, people can't even read🙏 
Что?
я нихуя на английском не понимаю!
glanced over the article, yeah that's a good explanation for the 0.001mm kids
waiting for that new bakka pcb
I’m saving this for my Russian repertoire comrade 

Whenever someone has a bad take it’s going to be my go to response
Even our people can’t read, just check sayodevice serv
Quick translation: Fcking degenerate, read the chat LITERALLY two messages above
Nikolai's question is the equivalent of fortnite settings
Poor openr
🥀
No, we need to punish openr and other delinquents.
On pcb, under plate and foam/silicone
The foam or the plastic
And what does it do?
Makes sound more foamy and poppy
You recommend I put it?
Nah
But you can try foamy one
What does it do
lol
Is it the foamy one?
Like what does sound foamy mean
I wouldn't use any PCB sheets, they mess with the actuation readings and shi. In terms of sound, most pcb sheets are used a type of sound acoustic modifiers.
Something like that but this is mx board https://youtube.com/shorts/RTdIalCW1IA?si=mxqUS8-GAHva2OpK
Ight thank god
I’m way too lazy to open it
L
Gap
Lmfao*

Sorry
No problem
if woot made an article like this, they’d have a lot less people suggesting 0.0001 in #1141096226884956181 😂
I’m Just kidding
This ain’t mine the others are
Yeah pbtfans loki are sick
🥀

An easier way to do this
A switch pusher from TX 🥰
Damn I just saw it
Doesn’t this mean half of the Krytox sold by vendors in the keyboard scene are subject to a lawsuit from Chemours? 
🤔
💀

Krytox gpl 105
Certificate: NSF H1 food grade for food contact
Special features: Good chemical resistance, Good oxidation resistance, Good adhesion to many substrates, Low noise level, Low speed performance, High temperature performance, High adhesion and tack
NLGI consistency: NLGI 2
Low temperature: -31°C to -50°C
Industries: Chemicals and Petrochemicals, Medicine and Pharmaceuticals, Automotive, Metalworking and Manufacturing, Paper and Pulp, Food and Beverages
Solid Composition: PTFE Teflon
High temperature: +201°C to 249°C
Applications: Chemical corrosive environments, Food machinery, Paper and cardboard, Pumps, Vacuum, Vacuum pumps, Rubber and elastomer lubrication, Plastic lubrication, O-ring seals and valves, Reactive services, Multi-purpose, Rolling bearings
chemical base: Fluorine PFPE Perfluoropolyether
No problem as I just finished now, did bleed a bit internally, used these but these are broken already
Just noticed 500g of krytox gpl cost 500usd
Waiting for my holy 80 case
Silver gang
I think that’s too much ye?
Can anyone tell me how to keep a single or double color
Hi, sorry for the question, but could I use adhesive copper tape to solve the problem with the friction pad's lack of grounding? I've decided to mount it on a Tofu60 Redux case.
Thank you very much for the help.
Regards @bronze grove
Herz
Krytox expensive but a lawsuit from Chemours more expensive I think 

Changing up the raw zinc?
Will see depending on the quality and feel of holy case
Raw is so good but want the light bar of holy alone
The raw zinc is my fav 80HE case. Love how unique it is
Ahh I see
Mine too but I like the holes and silicone diffuser is so good
If it doesn’t feel good, will get the white wooting keycaps and stick with zinc
@stone cedar
i will write up a small guide of what i did one moment
ok ok thank so much for the help
So, should the material placed between the case and the PCB connector be conductive or insulating? Sorry, but it's not clear to me.
This is the correct channel to write my question as I am told
I fall in love with raw zinc when first time seeing this build
10 mil for you
Conductive
Either below the USB-C port or any of the GH60 screw locations
-
As the case had a coating applied on top of the metal case, I used a 2mm drill bit to scratch away a small amount of the coating to make this look seemless (do this at your own risk)
-
I did this 3 times in total (the image only shows one – old image)
-
Once the coating was scratched away, I cut the foam to size
-
Placed the foam near the USB-C port area so that the adhesive/foam made contact with the 3 spots I exposed
-
This is optional but performed a continuity test to make sure the foam was connected to the case by touching the foam with one point and a screw location and made sure to hear beeps
-
Placed the module back inside and done
---- method 2
Place a screw into either the left or right location of the module; these have exposed metal that is connected to ground, which you can use to ground the case
Yes, anything conductive would work, but I would try to make sure that it doesn't touch any other part of the PCB to avoid possible shorts. If this is done, I recommend a tape mod on the PCB to help isolate it.
Also, some multimeters can cost as little as 2–3$. The continuity test works by supplying around 1V through the red test lead and completing the circuit through the ground path (black test lead). If electricity can flow from point A to B, the multimeter will either beep or display a (1)
foam would be more advised .
feel like that may be hard to set up
Conductive strip are used to block RF signals from shielded boxes and maintain conductivity with an adhesive backing on the bottom. When you use it, simply trim to the size you need, peel off the backing, and adhere to the surface. The foam strips provide a superior barrier and bonding ability to...
hard and risky
why don't u just screw it down?
why don’t you just gamble 
HAHAHHA
for me i take the keyboard apart often for work so i like not having to worry about screws (friction fit)
but i havent taken it apart in awhile
ngl, if using tofu redux... just purchase the tofu silicone thing and screw it on the right part of the keyboard with a single screw
Something like this?
Because I like the acoustics that the friction pad provides me more.
no thickness mentioned but I think you can make it work
you can’t order the ones from Ali Andrew sent?
Yes, of course, but it's because of the shipping time. Nothing more.
u won't notice much difference with 1 scew on friction fit and without screw on friction fit
but it's ur decision tho

yeah dude lol
should be possible
i will try it 😋
@steady halo cyberpunk coming to mac
not sure if this is the right place to ask, but does anyone have a nice usb c to usb cable you use with your wooting that isn't coiled or the original wooting cable
the Keanu Reeves game?
i won't touch that
yeah
y
idk,
never been a huge fan of the game
like it's good and such
but I can't get myself to love playing that game
i prefer to spend my time on speedrunning gta 5

its a shame
youre really missing out on it
naw youre good dw
based
Ali reviews man, I can’t 😭
Quality of Material: Fast
@glacial wind https://youtu.be/8-wwnIp7tLs?si=40nYq3F7zYk8WOcC
The RX1R III is a camera that can go anywhere, ready to capture life’s most moving, meaningful moments at exceptional image quality. This fixed-lens full-frame camera features a refined design that offers easy, intuitive control plus outstanding handling in any shooting situation.
Micron-level adjustment of the positions of the top-quality Z...
New camera for ya
Very cheap 
pleb question
if i put more foam in my case will it make the owlabs quieter or you guys think i should hand lube them
or is there nothing i can do to adjust the sound?
Orings under keycaps?
Usually yeah
I don’t think lubing will help you
i love the clack but i feel bad for my cat trying to sleep
Lubing temporarily makes it sound less loud, but it goes back to normal and usually only affects how they feel
Just use light springs Goku and you’ll never hear it on Wooting
how long does the lube last?
New plate or smth?
more foam wont really solve this, might even reflect sound back at you if you cramp too much foam in there
i hate 40g i never going back lool
Something softer, POM?
my geons were loud but not this loud
yeah softer plate will make the sound quieter if you have a dense plate
It’s not a last thing, it’s a “it will disappear and sound normal in 3 days” thing
im already using pc plate
i see
bro 10 layers?😭
this is for my 60he+
got the tofu 60 redxu with brass weight
I guess at this point you could try some silent switch, if you want to fundamentally change the sound
I think other methods might deaden the reverb, but the bottom out will still be kinda the same imo
any suggestions for switch?
or just put up with owlabs till tikken come out
dont beave me 
I dont remember the names of silent switches, but aligner knows for sure
that's if cat sleeping is really your concern
Haimu?
yeah I think haimu silent
i just feel bad because he sleeps near me and wakes up everytime im clacking lool
Goku black about to raze the neighborhood

Cat has a skill issue of finding a quiet place 🤣
bro is my shadow
he goes where i go
Maybe he likes fragmented sleep
fragmented sleep sounds like me during my night shift😭
If it doesn’t affect him and he just goes with it, I don’t really see an issue
fr me as well
naw he leaves sometimes and meows at me while hes leaving
hes cussing me out in cat 
“Just wait until dad comes back”
Meanwhile dad:
my cat is constantly on my lap when im on computer, but leaves immediately if I take out my guitar and start playing
this big boy sleeping beside me right meow
get him one of these
Imagine being that cat and inter-dimensional people are talking about him across the world without his knowledge
cat castle
i have to build a custom tree for him
Sir this is a PG Discord
there is some famous cat on this server with its own emotes too lol
its a shame they dont make it for big cats
Well then, let me get the camcorder out 💃
that's a silent switch for ya😭
i wonder if tikken final sound will be
since the sound test on the site isnt "final product"
I'd expect them to sound pretty much like ti he, esp since the manu looks to be the same
i like how the top part of the housing is clear
Get the lil guy some bose NC700s
because i cant get proper white rgb glow on owlabs but it still isnt bad
Haimu silent or you can wait for new TTC release

bet i will ty
turing might've hit that pose before licking his 80he
just go raw and use no keycaps
hello, i'm searching for the "thockiest" he switch for my 80he. any suggestions?
Another silent enjoyer tired of the endless clack?! 🥰
UR Studio Ice Ultra or Phylina Lightnings (both on Ali).
Silence witch
if you're talking abt me then no
We will transform goku into a silent enjoyer
thanks 🙂
I will say tho I'm tired of the typical HE clack
np 😃👍
I wish there would be new pcb-switch structures to check out
that sound quieter like MX
I’m tired of mag top out
I can’t stand the top out of all switches anymore
magnetic switches*
even raeds and haimus
to me top out is quite similar to MX switches, but bottom out is louder due to huge magnet
yeah, it’s not so much that it’s worse on mag but I just don’t wanna hear it (and silent mech switches are way way way way way better than silent mag)

are there any examples of any other boards/switches that only have the bottom out sound? I feel like it would be quite weird lol
Genty ahh debate happening rn 
use fluxes, give up
IIRC TTC had one
Fluxies*
it wasn’t frozen silent but the other one
thanks 😃👍
like a proper silenced top out
Why don’t we get all the magnetic switch manus and MX together in one room to make the best switch of all time chat
bad for business
you could make world peace like that but choose switch manus instead
why don't we all get together and decide on the next jade pro color
The only thing preventing it is the military industrial complex 🤓
🤑👍
You just made me facepalm cry in the gym LMAO
Now I just look like a maniac
people in the gym would be like "damn his last set must've been insane"
I’m stretching before tris so it’s even worse
its going to be highlighter yellow
perfect
“Improved light reflectiveness”
“Minimum latency, maximum RGB”
"hi-fi light & sound"
orchid is favorite switch of your favorite switch
TITONNNNNNNNNNN
realest
realest
realest
TITTEN WHEN
dem besten titten
They look like a nice dessert which draws me in but it’s Gateron at the end of the day
Tikken == Titon?
I agree and I support any jokes about gateron, but I might still be getting jade airs☠️
ur ice ultras have the diffuser which I dont like and also their spring is likely heavier, and I really liked springs latest gaterons
I’ll be praying for Mr Arc’s return from the pits of despair
🙏🏻
Now get aligner and joshibasan to cop and maybe we can talk
Actually no
My budget only supports owlabs atm 😭
bowlabs are simply good though
Alu plate on benom and silver CF on booting and I agree 🌹
Since the tikken overlords don’t want my money, it will be 40g owlabies
And since Wuque doesn’t want to support their customers either
Oh man I forgot all about CF plate
tuff
I only have more questions
I learned today that being 40y old is a protected attribute in the US, so take heed nerds.

Can we talk about how nice squidward’s walls look at night
What a beautiful purple 🌹
Does look prty
Really enjoying the jades, bit of a bummer that they will get chewed up quickly
Plastix would probably serve you better if they do get fucked fast
Got a few to chew through even if that's the case, but I'll keep my eye on those.
I’d stick to just 4 in that case
4 dots?
Try cyclone pro when they release it
4 donuts
Donuts, dots, it's all crunchy snacks in the end
Cursed
I'd do 4 but without the 2 near the middle bottom I felt the Bamzu tilt back slightly sometimes which I didn't love
Considered trying 5 with one in the center bottom but was afraid it'd tilt left/right which would be perhaps even worse
🤷
I never really had a tilt with mine but it sounded kinda gnarly on cloth but might just be no middle sensor skate
He needs to be immortalized in this server
realest
Why
He wants something that doesn’t exist, same as Mr aligner 
Real recognizes real
70/90pcs included in each pack Initial Force: 33±5gf Bottom-out Force: 45±10gf Total Travel: 3.2±0.1mm Initial Magnetic Flux: 122±8GS (PCB1.2mm) Bottom-out Magnetic Flux: 550±30GS (PCB1.2mm) Spring: 22mm Spring Pre-Travel: Freely setting Pre-Lubed: Yes Typing Style: Linear Lifetime: Over 150 million keys...
Oh no

Just a mere $150 guys
PC PC PC 
No wonder the sound isn’t improved. Looking at the more clear photo the sealed magnet doesn’t change any of the split stem parts moving about
So you still get the kind of weird muffled sound inside it when the split stem parts hit
They love pink color
Split stem?
Yeah the top and bottom half of stem are not one piece or stuck together
Weird
My wallet snapped shut in record time what the fuck is this shit
Gateron is restarted, GGs
this might do real well as they have a cult following with rx stuff
it's what i've been trying to explain for so long to folks
the chinese tests are bs in a lot of ways like they explained and the super low settings stuff is just more bs to add to the already nonsense way they test boards
at some point they all realized testers were using this way to test and all started building boards to win the nonsense tests while actually performing worse in real world usage
does it create sparks on every actuation?
holy the price
1.70 / switch
WTF
WTF
$150 for 90 switch????
Fuck that
Budget switch
If that's the case wooting is a budget board
Where was the source for this?
I'd rather purchase a wooting module
rather than an overpriced switch

even worse, that's a venom build
So expensive 💸
i think rx prices have been going up recently too. A lot of collectors and photographers loved that camera
Sno hows mac mini
mac studio, but it's been great. Just a nice spec bump from my previous m1
when will you start posting content on wooting's yt?
Bro used entire money to upgrade mac mini
probably after I finish up the written switch database. Basically right now I'm moving over entire wootingmods stuff and rebuilding it under wooting first
Guys I just bought PCB mounted stabs for my wooting 60he+ but it doesn't fit with the fr4 plate that I also bought 😭 I'm new to keyboard modding so I didn't know plates had to be either plate mounted or PCB mounted... Is there a way to make this work?
Or a PCB mount plate I could buy? Preferably ANSI and maybe PC or POM or FR4?
if you bought an fr4 plate from aliexpress/3rd party I would assume it's probably designed for pcb mount so you'd need something like a typeplus x yikb stab or swagkey knight stab
what stab did you buy?
those are standard screw in stabs aren't they? Why don't they fit?
Are you sure you bought pcb mount stab compatible plate
maybe its only plate mount compatible
yeah what plate did you buy?
kbdfans wooting plate is plate mounted stabs
if u didn't purchase the gt-60 case ver.
yea I didnt
is there a plate I could buy that's not played mounted
I didn't know there was a differnece
ah
yeah you'd want to buy the screw in one from keyboard fun store or similar vendors on aliexpress/elsewhere
yeah, on aliexpress
Are PCB stabs even worth it at this point?
well you could just use your existing stock wooting stabs in your current plate now
assuming you have lube i'm sure those perform just fine with a fresh lube job
Yeah I'm just sad I wasted all this time lubing the PCB stabs lol 😭
Its fine, you can use them later if you get compatible plate
Damn, f1-8x v2 in stock
@tawdry tree i been told you know about silent hall effect switches. You got any recommendations?
AEBoards Raeds HE
Wait for new TTC silent switch, they should release it in october
ill be getting the haimu doves (shipping as we speak) and the TTC silent when they come out, cant wait to see the difference!
Asked a few questions through Chemours’ site and this was the response (not so much answering any of my questions though).
Haimu Silents (need highly rec relubing) and Raeds.
I hope TTC’s silent magnetic switches will be good man
but probably not as good as Frozen Silent V2s
so if they suddenly sue the entire keyboard industry we know aligner is to blame
silent switch 
It’s possible that it wasn’t an accurate statement but the shit vendors pull and then sell that as Krytox reflects badly on them for sure.
just close the door bro
everyone remember this moment - aligner is the one to point fingers at
LOL
I wasn’t even asking questions about the legality of it
just if they recommend/promote vendors mixing their own 205g0
which seems to have caused all the inconsistent 205s on the market rn
it's why i never buy lube from aliexpress or vendors i don't trust without the proper certifications for real krytox
😃🖕
I don’t mean any aliexpress stuff
in korea at least the reputable ones all show their bulk order of krytox to prove they bought actual krytox
it’s actually kinda more likely they sell “genuine” when listed as such because krytox is still under dupont in china it seems
yeah but if vendors buy genuine 205 and 105 and then mix them together to create 205g0 (in not great conditions) you don’t really get genuine krytox.
I’ll know more when they answer my questions properly, if they will.
I asked em kindly tho, so hopefully
if everyone gets sued, mb.
😂
ah the korean vendors don't mix themselves, i wonder how many vendors do that though
it's okay now that aligner brought down the whole industry it doesn't matter anymore. We will enter our new lubeless era
according to a redditor, Krytox never made 205g0 themselves
olive oil will never sue us
yes, gonna do Extra Virgin Olive Oil from now on
actually, I should order a sub with Olive Oil tomorrow
avocado oil is better for cooking, so maybe that's something to consider for switches
truee
ty you all for your recommendations
🌹
chinese massage oil better
it will burn the switches to work harder

I need help, I'm doing a custom with my wooting, I want to buy an aviator cable but I live in Mexico and the wooting brand costs me more shipping than the cable, does anyone know what other cable can work with my keyboard without having connection problems
Coiled cables are a bit tricky. You need to test them yourself.
you gonna do the extra virgin olive oil?
we unvirgining olive oil now?
i mean my epomaker cable works fine even with takyon mode and i got it off amazon
If I saw that option, the problem is that there is no color I need 🫣 🫣
It's better to gateron jade pro or gateron jade Max??
Are Owlab Ti's available for you? Get them instead.
If they are not available then get Jade Pros
Cooking oils get rancid tho
Mineral oil could work
Owlab Ti's have improved stem wobble and they are cheaper. Sound is similar.
But you really do want a grease
Get Owlabs
And the things that were used industrially before synthetic greases was pig and whale grease
Its called Owlab Ti
There is also Duhuk Herz, same thing, different color
50g is what most choose
40
I already bought the 50g haha
Does anyone know a keycap set that color matches the white alumaze?
any BoW set or PBTFans X-ray
Well guess there is no way to check if the two whites are the same so we'll see, thanks though
Which switch does prebuilt 80he zinc case come with?
L60 v2
Any way to change to L45?
No. If you want L45 v2, you need to order 80HE module
Aye guys
What keycaps do you recommend for the 80he ghost
And for this too
I didn’t like these
are owlab ti he the go-to now
"now"
they have been for a while
in terms of price performance
there have been other good switches but they are pricey
thats fine, ive not been active. last time i was it was still geon raw
could get some owlabs or wait a couple months and get lekker tikken
yeah think ill grab those, i dont want to wait that long. maybe down the line
Yeah. Owlab Ti, Duhuk Herz, UR Ice Ultra, all good options
sounds good
so this will be for a venom60 and ill guess i go for knights again for stabs, but just to be sure. no way i can use the same kit twice, cause for my last set of knight stabs i never used the spacebar wire so i still have that
i guess i lack housings
so last time i was suggested to go long pole. i dont know if i should go for standard or long pole knights v3s if i want to use them with the owlab ti he, does anyone know
if you use owlabs ti he i would go for long pole or use geon stem spacers
alright thanks
shame the longpole is sold out at delta key again
or does this mean theres no longer a difference
hopefully tikken is cheap
knowing how wooting price their own switches, probably very affordable
0.25 per switch I hope
they don't make a long pole knight anymore. Use geon stem spacers instead
You might not need them at all
i have this open order so i feel like i should probably buy them regardless then, cause if i dont it'll cost a bunch to have it shipped again
im not sure if i can find out this specific combination otherwise, to make sure
i expect tikken to be a dissapointment tbh
I expect tikken to be the greatest thing of all time no contest
my assumption is they are going to be a decent switch, just like ti he, but with full travel
why would they be that bad lol
I like the line "without the cringe"
Is that line not in and of itself, cringe?
what is this
to me just a funny way of saying it wont have the bs 0.0001 rt and similar stuff
he isnt brainrot enough to know modern online lingo
but will it do knob though?????
announcement that the protaganist by wired will have a he version
I don't understand any of that word lmao
ijbol
Naisu
but I feel like the same case + venom will achieve the same thing. Unless it's different
which is shocking that it is said unironically
the zoomers do be talking like that often
its a little updated
so its like a v2 with hall effect bundled in
lmao
or venom i guess lmao
at this point just have a seperate factory modded a DB in
much easier
I'll grab these spacers off of the geon store then, as I got an order there anyway. 0.5mm right? They also sell stabs and I don't know if any of these are just as good as knight v3s, before I waste money buying those specifically somewhere else, if anyone wants to share an thought on that
well 'waste money' meaning that I have to ship them seperately from somewhere else so it'll be around 24-25EUR just for the stabs
yea 0.5mm
sweet, thanks
Typeplus are good
I'd say that I would pay like 6-7 EUR more to get the knights v3 to me. Not sure if theres like such small difference there that I should just grab the typeplus then? The price difference isnt actually too bad now that I ran it down, so either could be an option tbh
I think typeplus is better than knight v3 from what i have heard
Knight v3 had some issues with wire popping out
hmm okay thanks, yeah that makes it easier then
is the wooting silicone friction fit compatible with the mekanisk klippe T?
@gaunt plume gat spark https://item.taobao.com/item.htm?id=952876956749
Hell nah
For that price
The weirdest part about those switches is the travel distance
Did you guys see the specs
They’re one of shortest travels for he

Watafaq
lower the more stable right???
Shafie turned green👀
Too much travel distance for @polar girder he is max 3.0
you're greeeeeen
Congrats?)🥳
Thanks
How i can turn myself into hulk?
I asked to get those sent as well so we’ll see how I feel about the weird combo of split round stem 3.2mm travel
3.2 is too short
I didn’t lube my polar pros yet
I’m going to wait till I have both then just lube whichever feels nicer
There’s no way I want to lube two sets of split stems
Just hire someone
We did, you're looking at him
I think it’s the top half of the stem that annoys me
Usually I don’t mind lubing but that top stem is so awkward to hold and lube then reassemble
shafie is green, did he finally buy sony lens?
yes
lol shafie is a mod? That’s wild
I applaud progress
he has turned over a new leaf, just like his new Sony camera
Sony Lens is all you need
Ask Gateron. 6 Orchid Raw, 6 Orchid, 6 Spark and 6 Spark Pink 🔥 (they won’t even understand the question 🥀)
Ayo Mr Mark Akbar, To become a moderator on a trial, do you need to submit an application? Sell your soul? Or does it all depend on luck and recommendations from others?
all of the above
try to bribe me and Mark

Send location for switchy blanket i can do…
Make a statement expressing interest, either in DM or in chat as above, and it will be documented and discussed internally
Current location: at my desk on Ops Island
my location: Marketing Village
Raquel's office is way prettier
how many sony lenses do you own though?
new criteria unlocked

Wooting new meeting program?
Should I message you or someone else from the team?

Send me a DM and I'll share some additional context
or a carrier pigeon
make jakubix woothelp 
so he can spread as much misinformation and rumours as efficiently as possible
yesh
notice how mark has a sony camera too? It can't hurt @trail bane
I see what you did there, sno... 👀
lol aligner making it worse with every email

idk how youd even face legal actions for that
did aerobrake get hacked?
tokengrabbed*
If it’s genuinely illegal though, why the fuck is everyone doing it?
goddamn
i don't think they'll actually do it, but it's funny that they're threatening it because there's 1378494901 companies doing it and there's no way they can get them all
best of luck
literally the krytox name
hope it wasnt bad
It require a nda
trueeeeeee
especially with the big offenders being all chinese companies
ok i can just start selling kinder chocolate i bought from the lidl
doesnt mean ferrero comes sueing me
Change packaging
i think if they did go for anyone they'd try get the ones blatently using just fake krytox, but problem is they're all random chinese brands
seems fine
if you repackage it/do anything with it, it’s not the original product
And check what will happend
with some vendors mixing their own 205g0, I think they have a point
so? as long as the lube is original kyrtox thats no issue
i mean yeah thats an issue then
don’t think it works like that but I do not know
Well how we are supossed to know if it is genuine
it’s not a food product, so maybe
but through repackaging the properties of the product can change (if the vendor handles it badly) which then would reflect badly on the brand
so I kinda get it
im also pretty sure that unless they have been trying to fight it already they would maybe be counted as a genericized trademark
buy in bulk from official vendors 🔥
the whole thing lego for example is trying to prevent by sueing people calling non lego lego
could be
i mean im ofc no lawyer but makes no sense that you can be sued if you sell actual kyrtox lube just repackaged into smaller quantities.
it does make sense if repackaging can change the properties of the product brother
that’s what I’d assume they’re trying to “protect”
and vendors have been mixing their own 205g0 for a long time it seems
so the actual viscosity might be off from the original, maybe some other things too
i mean if krytox gets through with it then they might want to contact mayo and ketchup manufacturers to sue some restaurants/streetfood stalls for repacking and effectively selling their ketchup/mayo
i picture a world where aligner keeps replying to them and giving them examples and they just keep adding more potential lawsuits with each email
we soon enter a lubeless world
I haven’t been in a restaurant where they sell repackaged heinz
those small packs I know
i get mayo repacked all the time... and its paid extra not included
I don’t even know mayo brands lmao
id imagine if anything krytox would just vanish from the number 1 spot slowly. basically just like lego is rn
repackaged and sold under a brand name?
more and more bigger creators in the lego sphere use third party manufacturers now and promote them over lego
sometimes yes and sometimes no
i dont think theres a real legal foothold but again no lawyer. just wouldnt make a lick of sense to be able to get sued if you dont lie about what youre selling
unless everyone has to like sign some contract with krytox that specifies this whole resale stuff
in the previous email they stated it wasn’t for the consumer market at all
so maybe krytox just doesn’t care
🤷♂️
which would bring back the whole genericized trademark thing
in which case krytox would become synonymous with a kind of lubricant
and everything can just be called krytox lube
possible but krytox does have a lot of different lubricants
I guess it doesn’t matter really
like stanley
idk how it worked out for bandaid and what products they carried back then and if all they did was adhesive bandages
but bandaid is my go to example usually
Is that spacebar rounded?
Saw the image here: https://x.com/arbiterstudio/status/1945286048172363806?s=46
Why it looks like oem shitty he board
And as I play a lot of metroidvania and platform games I would love it, the regular edge in the spacebar becomes unconfortable after a while. Maybe it already existe but I would like an slightly rounded split spacebar in the Wooting 60HEv2
Cause it is 🔥
Get a domikey set
Maybe it is, but I still would like a rounded split space but
I will take a look, thanks!
Already thinking in what I want on the Wooting 60HEv2 😅
Did the raptor v2 get revealed yet?
I’ve never been able to look past the rounded spacebars on domikey sets
it looks so ugly to me
Dunno
Gateron revealed the spark switches
But could be really confortable for long gaming sessions! (I believe)
Realest
titon.
one step ahead this time with the recolor🙏
There’s a third recolor already but that one is “exclusive” iirc
It’s expensive so it has to have potential, right?
righttt
Or maybe I can just put a dot, like those being used on top of mouse M1 and M2
And those arent even the vct collab right?
Doubt that’d be comfy for on keyboards but if you try, lmk.
I think those are the purple and orange ones
is this a recolor of the fluxes?
been outta the loop about switches
lol
Pretty sure they are orange with some logos on it
read brethren
Orchid better
pc on pc again btw, imagine if it has the same issues
idk what vct is even, this was with zynoo
yo wtf

not dual rail so we good
bro turned green, actual orcshid
?
Fluxes are manufactured by K2 and sold by Wuque, rather than these spark switches by gateron
the internal structure is a lot different too between the two
Also fluxes have octagon stem, these are round 
yeap
Ooo I see, yea I forgot the fluxes weren't circular
Sound is muted (🤮), because of split stem
names don't really lend themselves to tell a consumer if they're recolors or not
let's relax, i haven't been on this channel in a while LOL god forbid i'm curious
@sacred elm ban this guy for lack of knowledge
😂


lol sorry if it came across as an asshole reply, I just thought you'd be aware that gateron is not the producer of fluxes
I can't
not everyone lives in this channel 💔🥀⛓️💥
shocking
oh yea I am aware, and you're good.
I was wondering if it was a similar thing to what I said earlier about WS Dashes and Jades being essentially the same switch, despite coming from diff companies
Valorant worldcup
there is a switch for valorant world cup, what the fuck?
Lozer mentality
was it that switch?
valorant
grindset
ah yes the Valorant HE

it’d be kinda crazy if the spark one is the valorant switch.
it’s not even advertised as 0.000000001mm

bad
Unusable
Has to be 0.00000000000000000001 for me to even think about using it
We need that 0.0000001 switch on our wootings
yeap exactly
if this is not the switch travel it's a hard pass for me
Maybe I should ping Simon about switch selector on benom so then the 1 week wait won’t affect me
Neutral evil arc 
are there sound tests out for the Gat Sparks
we need that arcsecond total travel switch asap
with the planck's length RT sensitivity🙏 
Probably just the echoey warehouse foxtail buttplug mic sound tests from Gateron
LMAO
also wtf I barely just noticed the price on these switches
hell nah
Try orchids
Maybe our new mod can tell us if they’re any good
cheapest new magnetic switch. 😃👍
these look interesting
They look nice atleast


