#đ§âkeyboard_modding
1 messages · Page 707 of 1
And canât say nothing about helios cuz they are unlubed
Doesnt like clack:
Cuz they suck
Cuz theyKOM POM
1). Elf king, 2). White snake, 3). Jades
Wobble suck sure but this is about sound
I love deep sound
Poms are deep
Elfâs also
Oh
Just in case, outemu pink is top 0


The certified lateron "not a recolor" switch sure do be lookin a lot like a recolor for not being a recolor
all this switch discussion "sounds" so silly when you realize vintage ks-20v1s sound best
just like vintage stock mx blacks
first past the post = best past the post đ€
đ đč
how long did it take for you guys to receive kbdfans tofu redux? North america specifically
Wtf is this their second store or someone impersonating them
I click on the first then second order btw
second store
itâs pretty common on ali
I think one is handled by ali (i.e aliâs warehouse where items get shipped from)
and the other by themselves
Ahh okay because they have the exact name I was pretty confused why I didnât found a product on their Shop Page turns out they are sold by the other store
Also I have this poron foam laying around should I cut a hole where the cable connects to the module
If youâre from the EU, you donât have to be careful when shopping on ali at all. buying obviously fake products like âŹ1 phones or 64TB usb sticks will just waste your time (so donât do that) but you can get a refund for anything.
yeah you can, just lay it on a PCB or in your case and draw the USB C port
and standoffs
or just the cable/db for the 80HE
Okay good to know, yeah Iâm aware of the obvious things but you never know
Yeah I saw the stock Wooting 80he foam laying in the case has a cutout too that why
Also there is a plastic foil on it is there any reason to keep it ?
The foam in your pic looks really similar to the stock case foam of the 80HE, so it might be a bit redundant if you still have the stock case foam
plastic foil on the foam? đ€
I can easily remove it itâs prob because there are lines for TKL/60% etc. itâs not sticky under it
Itâs some 3mm "Poron" from Amazon
oh lol, if itâs not adhesive then you can remove the foil
Okay and that one whole where the daughter board is (GT-80) and where the cable goes in the 80HE Module right
oh for the GT-80, just lay it in and trace the cable route and db
then cut it out
prob have to cut the side too if itâs foam for a TKL
Not cutting it would be a good idea right
But thank you now I know I need to cut the whole cable path
you can try to cut a little hole too and routing the cable through the foam and below it
might work
just try whatever haha
Yeah I just throw it out if I fuck up
Thanks for the help^^
Itâs no precision work. Even if you cut it the wrong size, you can still use it ;)
When foaming a keyboard does thickness (2mm-4mm) matter alot? Or is it more based on the space available in the case.
Anyone has a soundtest of the Owl Lab Tiâs with the GT-80 case?
I spring swapped mine (42.5g from 50g) and have them on a different board now, but they were a good/balanced clack on GT80. Nothing crazy loud if thatâs a concern
yesss spring swaped mine as welll â€ïž need that 63g lol
Ive went trough the channel and some ppl mentioned the elf king, its sounds good or what ? Also Ive seen these holes too they are just marketing right
those holes literally do nothing
lol
Liquid drainage đŠ
yeah didnt really think It would do something significant
ohhh that makes sense
yeah something about magnetic disorder due to heat lol
It's the magnetic distortion from humidity you gotta look out for
thickness, space available, how much you compress it (the more, itâll just sound like silicone) and arguably most importantly; which type of foam, open cell or closed cell (from my experience).
tought maybe it slightly change the sound profile or sum
we never know, maybe the holes are game changers when you play in a 50C (for mericas 122 F) environment
They actually good
On same tier as owlab ti/duhuks, but donât know if theyâre better
@flat cobalt ordered a GT-80 case!!! Really excited to get it in the upcoming weeks!!!
Funnily enough I happened to get the last one in stock of this variant
same mold and stuff ? or ttc always make their own thing? They like 32g /45g bottom out right
what case do you have on your 80he rn?
Stock pcr black
I mean theyâre same in case of price-quality and good alternative to TTC POM
Currently how mine looks
yeah they not that expensive, hmm should I go for them
Id be on the lookout for any tariff costs once it crosses into the US
Would be unfortunate, thanks for the heads up



Here is soundtest #1351676725980958730 message
Where did u order from
KBD fans
hmm not bad not bad, I like it. Usually sound dont really matter to me but here at home, I can tell that the thunderflash pro sound worse that lumia herz. they probably feel similar to 50G OWLAbs right like they around that a 10g+- deviation is kinda crazy no ?
Then ur fine
But not his wallet 
they got me for 45% on benom and kbdfans keycap set from Canada @thorn zealot
nobody is really safe if china has any involvement in the purchase in terms of where it was made from
40usd shipping + tax and maybe more
I didnât get any tariffs on my agar from kbd
Imagine payin tariffs
Extra $42.64 in shipping and taxes 
hopefully his wont have any, but if its coming from china directly i would assume the worst
hopefully it will be DHL and they will let you pay it online vs having fedex take payment on delivery which is cringe af
Nah kbdfans are shippin from their us warehouses now for us orders
Or at least that was the case when I ordered last month
Canât compare cuz I donât have owlabs or lumia switches, I use TTC KOM POM white snk and they imho lighter than Elf Kings
oh nice
maybe not then 
the ttc snakes are like 180 dollars for 90 right ?
WHAT
$180 for switches is insane
they look crazy whats so special tho, better manufacturing quality so less wobble or deviation or what ?
Better to get OG POMs or Wooting ones
You wonât believe me
They are pretty same as OG POMs
But more clackier
The 2 switches I have my eyes on rn is the OwlLab Tiâs and the Jade Proâs
And fancier
Please do not buy jade pros

i have owlabs and enjoy them a lot
hmm I mean im 400 switches in and not a single one touched a keyboard
i use to own geons before
With what case? And do you have a sound test?
so how much different are lumia to ti hes? are they just a cheaper alt or are we talking housing differences
i have them on a 60he+ with tofu case with brass weight
Better call nâ ask sno
not on 80he
Owl labâs minimal stem wobble and similar sound profile to the Jade Proâs pique my interest aswell as the price
Same material, same everything
no difference in spring length either afaik
Is it possible that you have or make a sound test to hear? If thats fine with you.
vintage KS-20s X Vintage Raptors đ„
hell yeah vintage gat vs vintage grain gold
Vintage Gateron Magnetic X Vintage Hejin Magnetic đ„
interesting, guess i have my answer for what im getting next then
yeahhhh
whatever came with my raven68 might be vintage grain gold i think
talking about the pink Duhuk Lumia Herz ones, not the Duhuk Core HEs.
Not vintage enough
Raven comes with the walled stem
yeah the herz
oh rofl
Teamwolf or someshit
Light Winds, thatâs what theyâre called
so housing is vintage but stem ainât
yeah one change above raptors
sadge
they were also strangely massively oiled up
compared to bone dry raptors
bro nobody knows wtf hejin was thinking when they oiled Black Knights, Light Winds, Hejin Teal and Yellows
they had to have dipped all those in a bath of oil
straight up
it wasnt even good lubricant oil either shit was like yellow
yeah lmao
with their yellow switches, the oil ate the coloring
so everything was even more yellow
stained top and bottom housing
đđ
i seriously think it might be cooking oil
LOL
but nope
only good thing about light winds is that if you match them with a Raw HE top, you got TTC level wobble
before TTC KoMs were a thing iirc
best franken in terms of wobble reduction without the friction stem swapped raptors had
also its funny how geon went from bone dry raptors to doubling down on raws being overlubed as huzz
we love sticky starts
wasnât even overlube per se, just kinda bad top housing design
iirc some got better results from wiping the lune
still bad tho
at least they are kinda cheap
yeah, when you wipe off the lube between the stem and top housing the stickiness was almost completely gone
it was nice compared to gatâs stuff at the time
speaking of which i cant believe jade v1s still costing that much in big 25
they should have taken the courtesy to do a perma discount
someone posted in here a while back
Ok thank you for the information
original KS-20s still at like $40 for 70 too iirc
gat is smart tho
i almost pulled the trigger on ks-20 oranges back then
diamond hands their own switches
diamond hand?
get some, soon theyâll be rare bro đ
selfscam đ„Č
@marsh saffron yo you still got that owlab sound test?
bro wants to hear that premium
i wonder if fox switches might be even rarer
literally dont know a single soul who gives af
Speaking of never discounting + nobody buying, when will fluxies go on sale
now i think
theyâre compatible with less than nothing
i could literally only think of sayo
LOL
wait the magnet strength location is offset on it nvm
not even compatible with sayo
its it n pole offset or s
I literally have no clue which board itâs compatible with
horizontal magnet orientation
like the KS-37 series
but itâs reversed too
so normal KS-37s have the N pole facing towards the light window iirc and the fox has the opposite
fr
wait it could probably be flipped on said ks37b boards
since it doesnt seem to have the tube
alrighty, bought me some herz
so
can anyone help me ?
me đ đ„ âïžâđ„
my backspace key is stuck xd i modded the black keyboard, did i apply the top right screw to tight?
incredible how dd kept that shit updated longer in the end
still a horrible company though
which stabs are you using?
mad60he before it was cool
real
the ones that came with the he60
hmm, the backspace key being stuck isnât because of a screw
did you overlube the stabs?
(if you even lubed them)
alright
does the backspace key get really stuck, or does it feel more like friction
so you can pull it back up but itâs sluggish
lol
inb4 crooked keycap
reassemble the stab
take the keycap off

oh nvm hes using stock wooting caps
and make a picture of the switch and stab if you can
not third rate chinesium
30$ "PBT XDA KEYCAP SETS" are so fire
thank u i will try that
omg i gotta take everything off again
ughh
screw in stabs?
bad pbt mix with accelerated shining
bad pbt mix with dead sound
bad qc + using pbt = crookfest
this is why aifei is the only valid option in that paygrade of keycaps
still better than x-ray đ
true
what does that even mean
at least those 30$ dyesub pbt xda sets dont fuckin CRACK
owh, do you have the module or the prebuilt 60HE?
yes
which?
i only applied lube for the switches and greas for the stabiliziers
the prebuilt 60he module
that comes originially
okay, the prebuilt
that comes with plate mounted stabilizers so you donât need to disassemble the whole board
i feel like this issue is better diagnosed with picture references
okay, do you have a switch puller?
i cba taking off all the keycaps now xd
you donât need to
ye i tried to put the switch in different direction
oooh i might have an idea
try putting the kc back and press really hard on both sides
sometimes the kc doesnt fit both stems on the stabilizers properly
++++++++++++++
keyboard implodes
I wanna see if taking the stabs out, and just using the switch alone doesnât cause it
if it doesnât, then itâs the stabs (very likely)
yes
yeah
just press on both clips
remove the switch first
if itâs still unclear: https://youtube.com/shorts/XzQnMCLRKwE
pcb mount wire popout = have fun desoldering everything
custom plate + TX AP top clip ins
it sucks that txap are the best plate stabs
knight plate stabs please speed i need this
designer studioâs arenât good?
designer studio is fine but they dont have tpu inserts on the wire clip i think
which txap does
now Im too deep in, so I can get new keycaps too, but how I can get into keycaps, heard gmk is pretty solid and I like unique ones like the gmk cosmos
nah they donât but they do have that spring thingy
ok so
i took the stab out
and now its not stuck anymore
eh i think its a gimmick
youâre using just the switch now?
yes
i had their pcb mount set and it felt nothing special
tpu clip >>
ok, inspect the stabs, see if you see anything wrong with it
or make a couple pics and send em
god i love how superior wuque stupids are to txap for 1/3 the price
I havenât tried em yet
but durock v3s use the same system
copied designer studio
yeah and durock v3s kinda suck so eh
I didnât mind em
Durock stabs are suck
tpu on wire clip just makes more sense i think
ws stupid are goated for this
doing what txap does without extremely tight tolerance issues
and 1/3 the price
GMK is nice but expensive, so it depends on your budget and if a set you like is still available.
never tried those either
you should get one they are like magic
the tpu they use for the wire clip and housing is so soft and thick
base kit is enough for 80he iso. sadly this one is out of stock
Rest in peace
everything you like will be out of stock or not yet released, thatâs fucking gmk
lol
could probably check if aifei has also made a set like that
and kbd too
gmk official storefront = mechmarket
no its not
unless its instock sets like wob

when you try to move the stab stem up and down, is it smooth?
also people on mm tend to have post nut clarity and will pawn their sets for stupidly cheap
especially its something really stupid like handerbeit
++
But... I like handarbeit
the people that sell sets I like all exclusively have pre nut confusion
boneyard for âŹ360
đ„
(r1)
so where is the best place to buy keycaps? Im EU but I think it will result in me ordering from a US Store anways. Also which keycaps brand are also good, can be around 60-130 Euro for the base kit
Oblotzky, DeltaKey, KeyGem
selling vintage r1 gmk wob for 500$ (serious offers only no lowballs)

if you were a sentient human being when gmk wob was a gb and not instock you are an unc
Cant tell if youâre serious lol
I am an unc
I am not!
cant tell if most of the mm people are serious either

ty!
np!
most eu vendors that arent candykeys are fine ngl
đ
magic hands ig

literally
now it doesnt get stuck but the key doesnt react anymore XD
lol
đ
Ah ok thanks for the info
skibidifans international shipping always costs like an arm and a leg watesiggma
anyone know about a case for the wooting 60 he that has adjustable typing angle like kickout feet
ducky one 2 mini or ducky one 2 mecha mini
you can get a second hand one pretty cheap
it wonât sound good
but it does have flip out feet
đđ
fucking growtopia player đđ
there is no way man
I feel like I caught a rare pokemon in the wild
What it is
oh saw this rn taught candykeys is trustworthy? Which EU vendors are good ?
a game that taught kids people on the internet canât be trusted
Crunch
From what I hear CandyKeys would not be a recommendation they don't have the best reputation
oh okay then I will avoid them in the future
Non crunch lekker đ„ vs crunch lekker đč
For more vendor options I'd look at this list 
https://www.alexotos.com/keyboard-vendor-list/
are there any like third party cases that are compatible with wooting 80he? i got the plastic version but i wanna throw it in a metal case and chnage ou the switches n keycaps
So minecraft pvp community?
gt 80, bone 80, holy 80, zinc
oh ty!
tyyyy
You can also find some more on ali, but idk if you hind any review on them
Not too much
no custom case with feet like that ...
Solid bottom would be better for adding crunch
Cuz literally no one is using this feets
The Keyboard stays in one position to end of the world

noh, use the 80he style feet
Sometimes you just have to trust the designer
80HE stock feets is high league
But when I was using the plastic case, I always used the same feet; 7 degrees, I think.
Anything interesting said in the wootstage?
there's no 7, only 2.8, 6, and 10
6 is the best imo
Idk
Yeah, 6 is meta
I fall asleep too early (9pm China time), and wake up at 3, so can't see stage
Unfortunate it was super awkward timing for Asia so couldnât watch it without reruining sleep schedule
What did they cover in the wootstage @trail bane ?
vomit
Honestly, I have no idea
I was just listening in the background while also playing music, so youâd better ask someone else.
Like i can guess nothing special
what if they leaked wooting 60 v3 and you missed it though

<-Me
what if, wooting lekker boxstem
Wootstage is where you need Calder, he leaks the best stuff there because itâs not recorded
it was where we found out about knob before 80he released
80he before 80he
no, itâs nothing to do with minecraft (though the game looks a bit like 2d minecraft)
not afaik :/
Everything what i want hear from wooting rn is that Iâm Getting 60he module for free, or they start selling switchy blankets/Woot POMs in smaller quantities
And i didnât heard anything about this topicsđ„
Still need it?
ANOTHER ONE?!
Iâve never seen this many (2) growtopians in the wild bro
holy fuck
whooo
I thought u đđ„âïžâđ„
it has been a long time
as it should be
the last time i played when Shadow surfer stopped became a mod
omfg, I'm an OG player
2013 
i remembered when wicker10 was still somebody
my goat
stopkillinggames đ„
Minecraft, gt, terraria combined
Meown >>
and pixel world
I sleep
happy days
happy to meet a growtopian bro
HAHA
fr
Explain wtf is that
u don't know gt?
/dance
\evaw
Its kinda not a good sound test but its a sound test đ€·
wauw
Iâve ordered the wooting 60he+ as a prebuilt and ordered keycaps separately, will i still be able to mod the switches if i decide i want the newer ones after it has arrived
like does the prebuilt still allow you to mod it
Yes
sick dude thanks for ur help
is it really worth the switch to the better switches do you think
if you know lol
It looks very weird
No sane man would buy 60% 7u keyboards

why
They are annoying like 75% and 65% crowd
ngl
in geon's smart store (korean web) the 6.25u has more than 1k purchases iirc
while 7u still <100(?)
Because no one wants 7u
ngl now my only thing is waiting for 60he v2 or buy a benom and hope that the pcb doesn't have any defects
Venom has defects?
ye i received mine yesterday
and one of the chip wasn't on the pcb
U know if you break off usb port u lose warranty right
i know, that's why i refund everything
Thats annoying part from not buying in eu
i'm in asia mate
and the stock for 7u was 0 at that time
so i decided to refund everything
I can't remember if wooting 80he pcb gets warm or not
I heard geon added controller emulation
yep
x axis controller(?)
something like that
It does, but it's not an issue
it won't be an issue if the pcb was properly made
not like some $30 chinese board that easily die

Lmao, even if it died, I have warranty
imo yes
Unlike cheap chinese board
7u venom has never been all that popular, it's always been the one in stock when venom was out of stock for 6.25u version
yep
true
it's just been super popular within the enthusiast he scene, but outside of that you don't really get folks buying the 7u venom
It's going to be worth it
does anyone know why wooting won't make standoffs on the pcb?
rather than making it on plate
that's my biggest downside about wooting
or are there any clips about that and answered by the wooting team?
@steady halo why you sold 80he
too chunky
It is small
using 60he v1 (non arm)
Do you have extra tiny hands?
if my 60he suddenly dies before the 60he v2 release, i might purchase benom (again)
not really, only used to use 60% more rather than tkl and case selection on the market rn
Do you want betray wooting?
nonono
even though the Netherlands (AKA where the wooting from) colonized my birth country, i will never betray wooting
You will hurt her's feelings
wait wooting is a she(?)
Flip over plastic case

And read sticker on back
please take care of her
no
where are they from?
(never been a huge fan of wrist wrest)
ghosted by the church of wooting a.k.a jakubix
prob a good thing
It is very secret wooting fact
Have you wondered why it is this soft and squishy?
because it's from a rubber material
It is made of silicone
ye silicone
Very diffrent kind..
and where is it from
@calm pulsar stop typing
I think 7u on a separate sku could have some uses (not talking abt it being niche enthusiast thing lol)
7u split wouldâve been easier to switch to full spacebar since itâs symmetrical and less hassle with key sizes and plate could be done easier also (normal spacebar and split central key in one spot)
and pitching bigger ctrl and alt keys wouldâve been nice for gamers too, like they did with split sb
lmao I was on the phone
BRO IS TYPING FOR THAT LONG AND ONLY TYPE THAT MUCH
i'm disappointed
i expected more from u
ngl,
7u / tsangan is a nice layout for users that has experience on them...
and i noticed after 1 week of usage of mechanical tsangan, i can't get used to with the FN key that is so far and my pinky is kinda short (asian fingers / japanese fingers)
7u layout only works on tkl
what i do is replace caps lock with fn
I have my fn key on the split right shift and the âwinâ key thatâs on the right side lol
yep, without a split left shift

true hhkb layout huh
I have small hands and i can reach most keys
still can't get myself after being used to typing on ansi 60%
no ctrl is where caps is on hhkb
u can keep ctrl where it is normally
oh wait
and just swap caps with fn
@steady halo I dont belive u have small hands
my hands are smaller than female hands
17 x 8cm
Can you give 60he as comparasion
I have the weak, womanly fingers of a guitar princess
maybe after i finish moving out from my parents place
i will try to give the comparison (if i remember)
17,7ish x 8,6ish cm for the specific size
where is grok
@grok
Gork better
you like them?
what switches did you get the L60 v2?
Yeah sounds good, I like to do a variety of research and listen to many different type tests when looking into switches
i had geons before i switched to owlabs and i been enjoying them a lot
Poggers 
i joined it as a measure to catch funny pay2cheat losers
other than that i actually quit in 2019 after selling off all my worlds and cashing out đ
kailh sticky rice
these guys just reusing names now
Hello everyone
Are the ttc pom kom the best switches in the market?
depends what you're looking for
Hmm
Good sound profile and stability
it really depends on how stable you're looking for
owlab ti he is more popular for sound while being very stable but not quite as stable as a ttc pom
Like not moving at all
Only intentional movement
there's no such thing as no moving
Excuse my bad English
even the most stable switch has a small amount of wiggle
I ment least wiggle room
if you want least wiggle room then yeah ttc pom is good
you could also look at some new options but they're not as tested yet
such as unionwell polar pro+
Ok I'll check them all out
Thank you for your time
@glacial wind imma skip on the pulsar fingertip
no traditional dongle like the viper v3 pro
idk why they like to take it out
what do you mean no dongle?
oh yeah almost no brands do those
i got the beast x instead which do
once they moved to 2k+ the dongles got big
its also why i got the superlight instead of the vv3 pro last time
most folks also don't recommend using those small ones either
which i regret lmao
they sometimes have polling/signal issues
i'm probably waiting until x4 to get the pulsar fingertip
not too keen on them waiting until x4 version to do more weight savings
i wouldn't mind as much if the crazylight wasn't lighter
for me it doesn't make much sense to have the fingertip version of a crazylight be heavier than it
about 40g
Crazylight is a good weight
It's a good ftip mouse
They're making a new shape?
Actually
The pulsar lab ftip mouse might be the X4 shape
Idk
you'll start to see 1k sized 8k dongles once manus start using the new nordic 54 controller
the only ones on the market are the new Rapoo mice
they've said x4 is just a refined x2f
Ah
x2f is the open back pulsar labs version but they'll turn that into x4 with a closed back
Oh good
Personal preference. Some switches sound nicer with more, some with none or less
I wouldnât call it a high priority mod by any means, more of one you do to tweak the sound a little
English like second language 
it's more like I was on my phone and also ended up rephrasing some sentences
only for sno to not read it
Ic ic
Sometimes Iâm also have same problem 
I hate to write on the phone because itâs so slow đ€Ł
with swipe it can be quite fast, but it doesnt always recognize keyboard jargon
Yeah maybe, Iâm usually at home since I also work from home so I honestly just chat write from a computer. I only use the phone for notifications.
yeah I work remotely as well and just have messengers open on pc
Super quick and rough look at polar pro+ vs poms
Definitely clacky pitch is a little lower than poms. Wobble is just as good as poms from a feel perspective, no idea about actual gauss comparison though
due to the round stem you notice the stem wobble a lot less than boxy pom stem, which could be why some folks are saying they have less stem wobble than poms (looks like sameish amount of wobble to me)
Iâd say poms have a tad less top wobble
stock lube is very light too. There's a little bit on the rails but it's extremely light, I would definitely self lube these
will have to play more with them properly in a board, but i think they're a nice small upgrade from poms in that I don't feel the stem as much when using them while they still feel very stable, but need to play around more and see how it feels over time
Canât wait for moređ€
i need to hand lube a polar pro+ for fair comparison i think. Their sound is a bit muffled and not as clean due to the poor factory lube vs hand lubed poms and owlab ti he
does anyone know or has done a custom ISO plate for the 60HE?
i want to make a custom DT60 build but they dont have the supported plate but do consider custom making one if they have the file
You can really notice the muffled sound of these without hand lube in this friction fit pc plate setup
i think they're going to be very much like TTC kom rgb/pom where the sound is not great without hand lube, but a lot better hand lubed
Okay now with one hand lubed polar pro+ with same switch positions. It cleaned up the sound a lot but itâs still much more muted and I donât think polar pros will be popular for sound enthusiasts
Wobble is amazingly tight after hand lube though.
Hype
it literally feels like the polar pros don't wobble at all (at bottom out)
you can get the files from the wooting github tho you might have to make a few modifications
owlab vs. pom vs polar pro (same as before
pom you can notice the top to bottom and left to right wiggle tiny bit, but with polar pro+ feels like these don't move
they still have tiny bit of wiggle of course but you don't feel the stem wall so it feels like it's basically completely not moving at all. These are definitely on par with flux for amazing feeling at the bottom out
Flux for $0.8 i guess
Sound signature sounds close with Ti He too.
yep. I think anyone who cares about sound needs to hand lube these though, which is going to really suck if you hate lubing
the split stem is a pain in the ass to lube, but you can see in first and second video the difference. There's a lot of muffled rattle if you don't hand lube (similar to unlubed ttc)
hand lubing requires you taking apart the stem then lubing the inside then lubing the other little part as well, probably take you twice as long to lube a set of these vs. normal switches
hm okay because Desktop Tribe is willing to make the plate so im not sure if the platefile is enough Thank you
Ngl Elf King like 0.55usd switch the best sounding TTC switch so far
feels like a bit pricy for mx stem is the problem, when you have so many good mx options like owlab and ur ultra/duhuk lamia
And if you still curious. TTC Helios has biggest top wobble compared to Snakes and OG Poms
wait why are your owlabs so expensive
Unikeys 5.90 for 10pcs
Maybe on ali they way cheaper
yeah they're waaay cheaper
like 0.48 without coupon and even lower if you use coins and coupon
Yeah even on swagkeys they cost 4.50
I think the polar pro+ will be my main for now, but man it's going to take an entire evening to hand lube these
I think Iâll also be using my new Elfs for a while too. As for the price, itâs quite possible it will go down, just like it did with the Taiâe switches
default lube sounds horrible lmao
at least lubing it makes it sounds close to Owlab to me, though at that point I just stick with owlab since it has dat good sound by default.
i'm really curious about gaterons version now
does their fully enclosed bottom half hide the muffly not great sound
time to wait I guess
Are you buying them in first batch?
the problem i think is the muffly sound comes from the actual split stem I feel
if it's as stable and lubed well for $1, it might be a better choice.
so i'm not sure the gaterons will 'fix' this issue
we'll see
yeah i'll buy when it's available
Iâll be waiting for shafie and your opinion cuz heâs getting them for free
well shafie isn't getting those
he's getting the he luminary switches, which isn't those split stem ones
his look like just recolored box stems of some sort lol
waow
Oh Iâm actually meant them
ah, yeah i'll buy those too anyway, it's part of my job now to test all the new switches
yay
do you also have budget from woot?
J*b
they cover any stuff i need for the role yeah
yey
although i actually emailed gateron to see if they can just send me switches since it's beneficial for them anyway to get tested and checked, but they never replied so guess i have to do it old fashioned way
I hoped polar pros would sound better than poms but they're ass for sound
tikken/ti he for me still
Sounds like mathew silent
yeah they're not it for sound. Seems the tikken and ti he are safe for sound kings
i'm also fairly sure anyone trying to hand lube these who doesn't love lubing is going to go crazy
i'm fairly satisfied for them for gaming though, since they're the tightest feeling switch i've ever had
oh wait actually i should ping @quasi hinge - he's the one who will go crazy for stability
It's cheaper than flux at the very least
their bottom out feels kinda mushy (soundwise), I assume that's due to the split stem design
I know that mounting can make or break a switch tho
if @stray tiger could test them in frog mini would be nice đ
do you have a pic of the stem? I wonder if they're rail bottom out actually
yeah that mushy/muted sound i think is due to split stem and not sure they can ever fully remove it
kinda hard to tell but it looks like their rails are longer than usual, wouldn't be surprised if they're rbo
or if they're pole bottom out, then the mushyness comes from split stem dampening vibrations from the bottom
yeah it's hard to say because of the whole split wobble feature thing i don't even know which hits first
theoretically i think it's both, which could be why it has that mushy bottom out as one hits then the other right after
hrm or magnet maybe
I think the magnet sticks out tiniest bit further so itâs probably magnet on plastic bottom out
couldnât be me
maybe it's pole bottom out after all, but the rails look still quite a bit longer than usual so depending on tolerances I think rails might bottom out too
good for you. how much did you get out?
@austere creek I guess goblintech is legit after all https://x.com/ziadkeebs/status/1937792342687182929
forgot how much i got out in cash but i moved around 900dls
40% of that was from csn btw
yes im south korean
for 2019 thatâs a lot
:PPPPPPPPP
LMAO
I remember that korean team that scammed a dav and lost all their rep in one night
funny af
i think the best csn team that came after was hosted by a bunch of swiss dudes
or at least thats what their flags showed most of the time
damn
team yayung or something
nice option for custom 5sided dye sub then
now itâs just indos
(if you can live with the marging of error in alignment and color theyll have)
yeah, looks decent too
yeah only indos still care about this shit game
i would too if the servers stopped being ass for parkouring
hey, if they make a living, I donât blame em
after my retirement all i ever want out of gt is parkouring

if they have the plate file available, itâs easy to make an iso plate.
oh, they do custom plates if you ask? thatâs pretty nice.
kailh patent for integrated hall sensor switch
kailh patent for a switch with press-to-wake functionality whatever that means
hmm, how are you going to change the setting?
ask them lol
is it for mx keeb?
https://detail.tmall.com/item.htm?id=947249199464 @gaunt plume kailh sticky rice switch
those switch patents are not for any current boards on the market
it has a magnet on the scheme
https://item.taobao.com/item.htm?id=941046047300 budget BOW ceramic caps, 349 yuan for tkl
Any difference between clear and black Knight V3 stabs?
Besides the obvious that one is clear and the other one is blackđ
Ty cap
Theyâre the unionwell polar pro+
Best place to get?
My only issue is the color lol
Only on aliexpress right now
5 yuan each for the pro+, 3 yuan for the pro
any1 got some black keycaps to recommend / or does any1 know the name of the keycaps where the letters/numbers/etc are on the side of the keycap and not ontop
Material, I think?
Matters very little though
not really i think but they can make or change the layout of their own plate for their own keyboards
i have had both sets and they are the same
kinda only relevant to people running transparent acrylic cases or sum
i know some who rly hate ws stupid for that
thx! Ready for purchase.
yeah, for their own case, itâs nice. just send them the ISO plate DXF file from Wootâs github and theyâll probably be able to do it.
Probably not
Keycaps like this?
google "xvx side printed keycaps"
When I search both the US store and the local flag, nothing pops up
Weird
Even âunionwell polarâ returns nothing
Awesome, thanks again
Would you say they are clearly more stable/better for stability? (Sound aside)
hey guys, anyone got some recommendations on HE switches for my wooting 80he? i like a deep muted (but not silent) sound profile,
tried looking online but not that many sound tests recently
@glacial wind do you support stop destroying video games?
UR Studio Ice Ultra, Phylina Lightning
sound tests
thank youuuuu\
đ
full POM, dual rail and a walled stem đđ
walled stem POM sakura pinks
will try a KS-20U bottom when I get them, might be interesting
doot do
how you been bro?
bros keyboard is wider than monitor
It could be possible if we are talking crt
bro has no keebmat or mousepad either đą
broâs pc itself is just a fan đđ
bro doesnt even own a wooting keyboard đ
Bros got the big ass enter key
yeah you can really see that this is in a video game because big enter key isn't real
not selling my hm66 bro đđ„âïžâđ„
what if i give you a stripe chocolate cookie
Can you ask him for a sound test
it's fine, you can possibly win $250 giftcard or a nice blanket in the coming days!!
250usd to buy 60v2...
i wanted the uwu........
bro please bro
I NEED THAT BLANKETTTT

Raquel
Sissyyyy plssss 
Shaking my smh
You failed us typing snails
oh damn nico won
Easily noticeably more stable at least physically
Thereâs only very very slight movement at bottom out and you canât feel it, unlike the ttc switches where you can feel the big stem wall hitting the sides
Same
hey i wanna get a wooting and want it to sound thumpy and thocky, yall got any suggestions for switches? i'll be getting a prc case
Zero wobble, ok
negative wobble
i have not been keeping up
We are back POM bros
are orchid raws not released
can i cop these and sell orchid raws for 10mil
nvm you get literally 1
wtf are jade airs
this is what happens when i play destiny
jade max v2
waiting on my herz
Place your order
noted. i'll forget about them
My orders being placed are Kiwi Ears Astral and Xenns Top Pro
FORGET that
cant wait for jade gaming sound test đ„
blabla
its not jade gaming
pompompom
spring
jade gaming pom dual rail
ill believe it when i see it @sacred elm
i'm much more interested in the split stem fully enclosed gateron switch
mias going to have to work for my patronage
Curious if physical wobble is better than ttc pom
i don't think there's anything they can improve for box stem wobble anymore
it's kind of hit the limit there
turn the box into a decahedron
ttc tried that moving rail to top housing but that did nothing it seems
i think round stem might be the future honestly
get the stability benefit of square walled stem but doesn't have that distinct top/bottom left/right feel when you wobble the square stem against the housing
i want orchid raw
A while back I failed to pull the trigger on the jade proâs, which at the time were a top âlight but long springâ contenderâŠ.along with theâŠ.Magneto and Uranus esport or something?? I saw above the UR Ice Ultraâs being discussed and they looked good also. They are $32 committed to $56 for jade pro. Canât find any reviews. Worth trying or just go for Jade pro still? Or another option Iâm unaware of?
herz 
get ur ice ultra

Is there any 80he iso blueprint or template? I found a taobao store that is willing to make a 80he iso plate. But they dont have any template for it
isnt duhuk ass?
Jade pros are old and wobbly, get owlab ti he/UR ice or the Phylina lightning bolt (boxstem UR ice) if you want deeper sound
yeah lighter spring, spring swap to make them sexy
50-60g my favs
I saw one at github but Im not sure if it is for the plates or not.






