#🔧│keyboard_modding
1 messages · Page 676 of 1
surely at some point w the foam and everything it doesn’t affect it
bro i tried 2h to burger mount and it always fell off
yeah makes it deeper
foam and brass weight good
does the USB c port fit well
I have Tofu60 with Brass Weight, i used with and without and the difference wasnt that noticeable tbh
atleast for me
i rmb’d mine liked to hover abv the tofu’s port
no grinding?
nope
yeah fits good but the pcb doesnt fit 100% symetric in the case
you need to move it a little bit to left so it fits
prob slap some oblivion keycaps and call it a day
what i hate about leggera is the typing angle only
But it fits well not noticeable at all
how much?
idk why it irritates me
my cat just licked my forehead
5°
im apart of the cat tribe

and the bottom lip is kinda ass
what i hate about redux is the feet only
but i can’t w flat or less than 6-7
does it line up with the wooting wrist rest?
also armory crate
does it slip?
not sure, never tried
no, but some batch is not flat
can we get cases with negative typing angle
bro is cooking
why hate the feet?
Wootility was my gateway drug to good software, can never go back
@tulip rapids
tbf it’s kbdfans, i’m not surprised 
web
yo i saw that pin
is it better now?
so you hate it when its flat?
it's not flat
i see
i have to change mine because of batch QC
could yall help me decide the keycaps, i can go w a plain black on gray set or i can go with a pbt gmk oblivion inspired set
i wonder what type i got now
pbtfans lyla
idk, it’s not armory but a new web version. it wasn’t showcased so.. 😬
it’s on a silver case tho
buy a fbb keycaps ser
set*
u will love it
3 months without alu case…
ye heard of em
Where is my Holy80
nowhere
🥀 🥀 🥀
TX Keyboard Multi-Tool is a 5-in-1 keyboard tool that has five useful functions. It can be used to remove switches from keyboards, pull keycaps, open switches, measure PCB thickness, and measure the stem pole length. TX Multi-Tool 5-in-1 Features: Switch Puller: Protective films are included to attach when in use for p
send that packet when u want bro
TX HE 20mm Springs are springs dedicated for HE switches with a wider diameter to account for the wide stems and non-magnetic properties so it does not interfere with the switch performance. These springs are linear throughout the keypress and has a slightly heavier initial force than the 18mm springs. TX HE 20mm Sprin
@fringe quarry how do u feel when comparing venom & 80he
I gotta come back from my trip from europe before I buy anything
i feel sadness bc of the amount of money i spend on keyboards
nah fr
i want people's opinions
about it
You can always get something positive out of it
at least it aint microtransactions looks at wallet
because ngl, i felt nothing different only a little bit smoother on wooting (?)
im waiting for stuff
make it sound better than 80he
what case r u planning.
oohh
sad
okay
nvm let's move on
HAHAHHA
jk
love the leggera
but on my mx, it's touching the left side of the case
surface finish is kinda mid imo
g version
I probably spent around 2k+ on keyboards as a hobby, mostly during my Wooting arc
ye i dont think its centered on mine either
im a oring mount hater now
the case is kinda mid, overrated since it's a G and cheap alu case
good for the price tho
good enough once it sounds okay
it sounds okay
not like the best sounding case
I think I've spent like close to $700 on HE board related stuff. Close to 1k if you count other board I have beforehand. At least it's not like my Piano hobby where I've spent cumulative $5k on just 2 piano (1 used 1 digital).
also removing pcb from oring mount feels so dumb
but for $69 (before shipping) worth the price
frog mini still better
rather than leggera
tadpole mount sounds nice
i never spent anything on mech boards
for a Tray mount, i still prefer my redux rather than leggera..
(sorry leggera lovers)
leggera only sounds good imo in g version
yep
the T ver. is kinda meh
I just sold one of 2 fav tray mount boards. Noxary T60, but still have my absolute fav
I got a Black ano and an Acryllic version of the Tofu60 Redux with brass weights for both
that looks clean
ngl
this hobby too small to be fun
yep
@fringe quarry i suggest u to use some kinda small cover for the venom pcb standoff
idk if it's gonna work, but kbdfans sells a standoff silicone cover
i might try that
My absolute fav tray mount is even rarer. I think like only 20 or 30 made. Sentraq HP. It's like a Mekanisk Fjell but without the horrible typing angle. Weighs like 3lbs.
do they touch
bcs i need to buy a black leggera, since i have only moon
like does the standoff touch when using oring
the standoff on the pcb
not case
oh
Its a charcoal gray, my white balance is off bad
i got some random small orings
Haha I'd sell it but only in the US sorry
HAHAHAH
thats the latest leggera case ?
if i'm ur grandson, I don't need to buy it
no
what case is that
Seggsy bezels
Heh
@tulip rapids
No >:(
how's ur arm bro
so u want me to break it again?
No cast, just bandages and a brace
thank you phish
Finna bish slap tf out of you with my froggy case
Don't you dare

ur froggy is not as heavy as my redux
@polar girder least we can watch CS live for the next week or two
I ordered my UR Studio Ice Ultra for 25€ only
Well finna pull out my neo65 then

put some more foam in ur kb and u can achieve ur he dream
Which Foam should i use
Polyfill?
Rn im using stock Tofu60 Foam
not polyfill
polyfill doesnt affect pitch of the sound
just removes any case sounds/resonance
What Plate/Pad should i use
Nono i listen to phish
on ultra
for ur dream just stick with poron sandwich pad and pc plate
ok, no balls for u again
and get a denser foam
I use Pc and Silicon rn
On my Raws
can u lift that with 1 hand tho?
i use fr4 switches
at least i can shield myself with my left hand
Sorta
💀
sorry papa frog
let's gooo
polyfill is used to dampen high frequency resonance and clean up the sound a bit
So PC Plate, Poron Foam, Denser Foam in Case?
yep
yes
no silicone pad
silicone is covering a low pitch sound and makes it higher pitched iirc
poron does the opposite
idk if it makes an effect, but some people say that pet sheet would change the sound deeper as well
i rly like how it sound here
you forgot your cable on the first one
its not my soundtest
mb
rawhuks here i come
Its Foam Up Wooden Case with Alu Plate

use a pc case
But i want it little bit less clacky
it will make it deeper and thockier
I wanna stick with Tofu60
i lubed my duhuk and now its silent
Yeah i forgot about that i might just Handlube the Springs cause i dont wanna spend 20€ for that Oil tho rn
its the spacebar tho
oh normal
so i fw it
but the top out is loud
How height needs the foam to be
somehow
i already got duhuk raw and ti
enough where it makes a diff in sound but not too much where u need to press ur pcb in
Yeah Bro there are like 100 different sizes
i tried a switch and i felt that rawhuks are deeper rather than TI's
i think u can combine the redux foam with wooting foam if u kept that
im not sure cuz i threw away the foam once i got em
no i still got it tho
cases with screws so good
such a waste
L phish
wasting
no eco to save the earth
So just Redux Foam and Wooting Foam on Top?
cant use foam on the g
no foam is yucky
i do
although that experience is so bad
good job penguin
I mean the dense foam need to be like 1cm or
i bought esd film from geonworks
i can only find 4cm
also what im supposed to do with all the other polyfill now
like that shit takes up space
Burn it
inside?
yes
oki
Inside the Wooting🔥
let the toxic plastic fumes fill up your home
dont think u need esd film for venom in leggera
Its better than Glue!
I don't

thinking about redux HE
yeah prolly not
but i'm sure HE doesn't need esd film
ima need esd film for my mx kb soon
i bought it because cost only $3
i would love optimum case with center usb
if ups decides to deliver

would be peak design
nah i hate the logo from optimum
dont look on the bottom
Should i tape mod my pcb with ur ultras
BLASPHEMY
ye
W is for W, W King
It just reminds you everyday what you are
i never used tape mod
erik will be mad at u
wooting logo is from E, Erik
im scared
L toasty
mb
it's an E
lol I just got done watching the Astana tourney. Only caught a fraction of it tho lol yeah
Dallas much easier to catch
Astralis was crazy Cinderella story to get to the finals tho
#🔧│keyboard_modding thing to consume for the week:
TX he springs
where my consumers at
My account when I’m not doing any modifications to the Wooting🌹
My account after modifications🥀 || i’m not done already ||
I’ve definitely lost a couple of kilos during this period.
Yea, that’s looks goofy, but I’m using my account only for buying some stuff
Im assuming thats polish dollars? If so I have no clue what that means but it's a big number so I like it!
Its why I love vacationing in Mexico. My dollars turn into a big number of pesos
Even though the culture of cashless payments is growing more and more in Poland, it’s much more convenient for me this way.
1pln= /4
bro
that's still small
😭
Ic ic 😭
i'm crying rn
- Holy80, + 10-20pcs flux, +owlab, +duhuk herz, +woot poms, +plate for holy80, +pbt keycaps, +full cerakey set
2.6k already
usd
😩
f me man
even there's still ± 10 more days until may ends
nah u're cooked
wait why r u buying herz?
don't u have owlabs?
I have POMs
And this is only keyboard things
Also i need new monitor, mouse, mousepad, microphone(ig). And upgrade pc hw
and this is mostly peripherals
I’m cooked
5-10% to daily life
2k+ usd
i'm cooked as well
can't continue living my life like this😩
Fr
I hope that if I’m not too lazy, I’ll go work during the summer to farm some money.
Looks like ass cheap membrane keyboard tbh🙏
@trail bane since u're a ttc magneto series fanboy
Does the kom and rgb have any difference?
Idk
I’m kom POM fanboy
Green snks are pretty good(og koms)







not available at my local vendor
theyve also got a small bunch that only come in pre-assembled boards
most probably i will buy one of kom, rgb, or pom
pom for full set venom will cost acount $56
On ali you can find some fine he switch testers
while kom & rgb cost $39
link?
i have the kprepublic one
will the extra $17 worth it?
are there any others thatve come out recently?
the pom's are little bit deeper tho
not that much deeper
it's really up to you
i don't think $17 is worth it to get slightly deeper
heummm
this really comes down to what YOU value
i might buy the normal kom i guess
local vendors
usd?
it's not available for international
IDR
Rp 610.000 around 37.21 usd for 65 pcs of kom
not a bad price imo
Looks like there’s only 1 mid tester left
https://a.aliexpress.com/_Eu0Ajyi
damn cuz in america its always 90cents per switch
In others, random switches from Outemu.
https://www.aliexpress.us/item/3256807687353872.html this is worth
Idk idk
Too much outemu
half of them DO suck
switchoddities isnt a bad place but the prices are steep
based in chicago
I only changed the alphas and spacebar for this, i got lazy
gateron speed silver they aight
not really in my favor
same thinkg with the black inks, well idk how black inks would turn out when lubed and filmed but i still think i wouldnt enjoy it as much as the milky yellows
still lean into like cherry type switches or LP switches
just purchased the kom's
not possible to spring swap the kom's right?
Not recommended
the spring swap?
Yes
Need is a strong word. Strongly suggested.
Only three dots at the bottom
You could pay twice as much to get fluxies.
nah at the end of the day, i will relube them and spring lube
so no worries
venom will arrive on Wednesday, switches will arrive tomorrow
enough time for me to relube while watching conan
That's the move, line up some long form content
Can you crunch mod koms
No i mean
😃 👍
Putting dorito bits inside
Sure!
Pay for quality of switch not random lube job
Whack
More noise = bad
Just smoothness and bottom out and top out. Ideally nicely mute but crisp and clean.
No weird crunch or scratch shit
lube job is included as quality 
I mean if you’re looking at value maybe
But not for just best performing switch as a modder
Like if you’re lazy and consider quality of stock lube job then I understand
But if you want the best switch then no stock lube job will suffice and just lube the damn thing yourself
Paying for or considering convenience and quality of convenience is totally fine
But not relevant when considering best switch
Its like where you crunch chips under your finger for fun
when i enter the crunch church
They are making case for their hall effect keyboard
KBD monopolizing keyboard cases I see
Replaced my FR4 plate with a POM plate over the weekend, quite nice.
For fun, yes
It's been a 9 month wait for these
Rog launched a Split HE keyboard
God I forgot how CF clacks 🧏♂️
Forbidden FR4
FR4 gives it some thocky background sound that I like which is why I kept it
New office keyboard starting tmrw. No more membrane 🥀
Be like that
They also released the extreme and a split keyboard 🥀
Oh top is FR4?
fr4 the neutral plate

i fw it sometimes
Erm sorry but bottom clears
Ur right mb

im over tweaking if my gmk and hmx switches will be here on time
i know my hmx sunset gleams will be
but damn
coming from canada
im scared man
Holy shit
Shut up bands alt account
If I flooded my keyboard with poron foam I could probably make it sound similar on PC plate
Fuck that tho
What’s over tweakin
Bottom is MX 🤣
Is that when u go too far and finish
That’s the one time he > mx
Fair
Not shitting u today I dropped my knife and the tip slashed my ankle
Yikes you good?
I’m good it wasn’t deep
I hate the feeling of being cut so that is giga 🥀🥀🥀
I hit my middle finger knuckle on my ceiling and scraped it and I wasn’t happy about that
Let alone ankle down
I’ve seen ppl with worse cuts
Saw someone flipping once and the knife flew and cut the inside of their nose
My worst cut was when I was cutting an onion with one of the really sharp knives and nicked the top of my index finger and it wouldn’t stop bleeding
Which prob isn’t even close to a top 10-15 cut but that shit sucked
Yeah I sliced my foot wide open in a public pool by a rock
Looked like a scene from jaws
You emo for that one ong
Cut half my pinky off
Snapped a swiss army knife closed on it, whoop
Tight spring, that one
Oh we flexing cuts now
Yeah I’m not using mine anymore
🥀
Not very skibidi
Oh crud, you good?
This was 30 years ago. I'm good.
Reattached and everything.
I am lucky to still have all my digits intact lol
I've had a few close calls but nothing super bad
The worst was with the table saw
But the sawstop did its job
Thinking of table saw close calls makes my heart skip
Damn, lucky you. Fucking science, bless.
Yeah lol
A piece got pinched between the blade and the fence and the piece kicked back and my hand went straight into the blade.
I don't wanna play this game anymore.
shi i didn't know we cant get our shit reattached tf
thinking about it, shi starting to makes sense now
unionwell switch specs
Have to have the right circumstances I imagine, and probably helped that I was young. But yeah, bodies are cool as hell.
there's so many things i fear the body can't do but surprisingly can do
time to buy artisan tray and fill it up
I'm sure he already has a few trays filled up knowing him 
Get hyped people
I'm hyped 
Smol knob on the desk, big knob under it 
I think you got the order wrong
10 small knobs next to each other, all only controlling 10% of volume
Knobkeeb when
Hello. If you use the Flux switch daily, have you noticed any QC issues?
Dont use the flux but one issue i have noticed with it is the price
lol
the question is which day are they planning the stream
Good question
I want one
A couple extra
Fullknob is new meta
I will get 5 knob. 1 for each of my he board including non existent HE numpad, and 1 extra for anybody local to try and 1 other extra for myself.
And 1 big knob cause why not
My only fear is it costing like $10 each
But it's fine
who needs a midi controller got Wooting
For the low low price of $400 or $100 ish with uwu
got some owlab ti's and now getting phantom keypresses, any ideas to stop them?
what board
never happened to me tho
try replugging the keeb
i think because the auto calibration haven't found the neutral position
Why do I love the look of this 🤌
i bought that already

still on the way from CN
yj60
thanks ill replug and see how it goes
u can color it by urself
and 1.5 kg case alone
idk if it's true or now
I'm getting the owlab but guess I can always buy another 60he 😂
Centerpiece ahhh case
Yeah I got 2 of them on order 😂 shame we lost the engraving on it
You bought a centerpiece?
I bought 2
Questionable
🤣 will never get used but love buying keyboards for display purposes
There's that flux keyboard but highly doubt that's one I'd buy
is that the finalmouse case
Finalmouse for Wooting
Finalmouse x Wooting Collab when 🤌
A keyboard and mouse combo
finalmouse has their own keyboard that's been coming out
for 3 years
Tell me about it
🤣 gonna be a long wait still
Centrepiece pro
believe they cancelled the standard one didn't they it's just the HE version now
They went back on the OG design with the nice engraving which is a shame tbh
But tbh this Owlab Wooting is gonna be end game when it arrives 🤌
because you like tacky shit
engraved stuff is nice
esp when it is actually hand graved
but the centerpiece one aint it for me
it just looks wrong and quickly made it looks like what a guy can recall an engraving should look like
i wished they full sent it
but they never improved on it and it looks like they are just pulling it back to look normal again
i think they got themselves in a weird spot now with centerpiece because they promised best he performance
and it's taken so long to make it that the top tier he performance has come so far that it's hard for them to match the performance and sound while having switches stuck on top of an lcd screen
the centerpiece does have its merits tho
i think if they just made an lcd keyboard it could have been cool
that screen and transparent keys idea is smt another fundraiser promised and hyped up yea
and that one was a flop
it seems like they are making that thing a reality
oh that one is still promising to deliver lol
every month they have a monthly update but no footage of it working while promising delivery is close
to be fair i don't think they intended to rugpull, but they got themselves in too deep with no knowledge of how to make that product and don't have the funds to do what they need now
so now feels like they're just aiming to push out a very scuffed keyboard that's kind of similar to what's promised and wash hands of it
they raised such an absurd amount of money at this point lol
yea probably crashed by a very optimistic r&d budget
How much finalboy got money from new centerpiece?
nah it's likely similar or more
they had the previous most funded kickstarter type keyboard for awhile
and continued taking orders on their site after
it was over $5 million aus and that's before all the website orders that came after
if centerpiece went balls deep
but to be fair this is a handgraved on an existing board
but finalmouse has never improved its engraving designs
this is more similar to what they could have done
With wooting 60hev2 coming, i don't have much hope for it to be the best gaming keyboard
They can call it the best rgb board though
yeah
I don't even wanna use the Owlab when it turns up until I got the v2 to put in it 🤣
I hope 80he got its own owlab case too
Yeah I mainly use my 80he so would love to see that
hope they come in different colors
At least we know we guessed right on the 80he knob placement
just that it never got done in time
yeah i prefer the 1u knobs
if you can click + rotate the knob would be dope
then you can use it instead of esc
pretty sure u can
They said it’s both click and rotate yeah
😳
Gooning with this
That is straight up magic.
They might’ve meant just the big one though.
Maybe, since you can press 4 keys at once
lol imagine that big knob on 60%
It would work if they did a 64%. 👀👀
That is a big one lol
would be kinda sick imo
I may buy all 3 and see what is best
Knobmaxxing
I would get it and replace the esc key
i rly hope they release multiple colors
Yeah, on the big one I can understand how it’d be possible but not at all with the small one. Even continuous rotation doesn’t seem feasible on that one.
We'll see, maybe there might be some programming magic
Interchangeable knob wheel colours so can just buy 1 unit but buy extra outer wheel pieces to change colours... if that is posible I dunno 
Im lucky I only use wooting keycaps for the shine through, they match
They might release more depending on the sales
like the straps
for the big one i'd hope you can change both colors
the outer ring and the inner circle
Yeah but without buying a full new unit
they look the same
I dont even use those keys
What if i told you it’s crunch magic
you could just press the middle part of the big one for pause
True
Ill still get all the knobs and go from there
I will add 1 more knob to the card if that's the case
more twisting
💸
I hope they are decently priced
But who am I kidding, id pay whatever they ask 🤪
Yoo anything else thats new on computex?
I thought I would have to wait for 80he V2 for the knob support
My wooting fan aura grows
xm1 4k v2 and a noctua feinmann prototype
all I have seen in regards for peripherals
Wat about wooting?
don't think so

Fragrance edition?😳
Just like those anime gpus
Is that a fan in there

That will surely help my sweaty hands
looks like it
wait is that a fan?
I think so haha
I may get that looool
Sweaty hands unite!
also i still havent bought a pc
half too busy/lazy
half still stunlocked by motherboards
and the electronics fair is almost here
Th?
Better get one soon
I heard TSMC is increasing the price of wafers by at least 10%
And if you are US based, tariff shock will hit by June depending on inventories
Oof, I still have to rebuild my computer too
yea i will
tho i am now more unsure abt getting the intel b580
Least you got your camera before Sony went crazy
Half their lenses in US just went up 30%, no word if they’ll try push prices up in other places too for offsetting new tariff cost further
that does look good
first mouse to sell 0 times
I wonder what the noctua tax on it would be
gotta be 200+
I remember that noctua psu they released last year from seasonic was like $1000 lol
pain
who even hears a psu lol
Very cool but I’m definitely not paying $1k for a psu
Yeah, I am hearing companies will likely raise prices for everyone around the world to capture the lost revenue from the tariff situation
It will vary and will be done company by company, so who knows
Ok but what if theres a sony lens in it
Then you’d be a fool to not buy. That’s 1 plus 1 special
You will need a case with a window for the PSU so you can watch the electrons power your rig lol
Luckily i got that
ooo new strap
Forget the knob, we want photos of the baggage tag
White 60 strap 😉
for the black case as well?
Well it is wooting employees exclusive
Naaa, buy black 60HE v2 get black and yellow strap. Buy white get white and yellow
Everyone knows white be the correct choice
how do I expedite the creation of this lol
what about silver?
can we know how spinny is knob?
Hey bro @sacred elm , is there any issue with typing or performance on the WS flux besides the QC issue?
There are magnet issues, but on wooting I havent noticed anything. On other boards, they dont work properly.
Wooting
calibration
Even on zinc no issue?
Thanks! 🙂
it spins
Video!!!
Never
imagine theyd know theres like 50 other people they dont have the signature off at wooting lol
reminds me of the 1 kid who actually got all wooting employees signatures during the wootup v3 from all at the time employed people
On his twohe propably?
Left corner, definetly guy was doctor before because i cant read his signature
Paracetamol v2 ig
Crunch maxing
Propably his tax office takes months to decypher his hierogliphs

would the knobs have magnets that move up and down inside r smth
as you twist it
also will they have any tactility
like a screw
Wooting definitely should collab with a case company to release a different 80 case, cause the zinc cases from wooting are not it
There are 3 after market cases already
Yes but no wooting collab
Gt80, bone80 and?
cope80
that one taobao case no one remembers the name on
with the math signs
im assuming he actually meant holy80 but that aint out
holy80
holy not out
Crunch80
so what i heard is owlab80 case
Is that going to be $800
im just not entirely sure why the collab is needed for a case to be a valid option for someone
what are some other wooting 80he cases not kdb fans or wooting?
aim bone80
thanks
Hello again bro @sacred elm . 100% Sure no issue on zinc? maybe I will buy the flux if there's no issue
As I said, I havent noticed any issues on wooting, but I wouldnt recommend buying them for that price. Maybe get them after Wuque fixes existing issues.
I already know about it from mansen. "It will be a thing if ow60 goes well"
See, the issue with Flux is that they aren’t TTC KoM POM 
There isn't a situation where Id buy them over the TI's the Tikken's or a few other switches.
Yeah, they are very overpriced
Tikkens aren’t out for like 3-6 months lol
But I like how they feel
Worth the wait!
Well you could release another in house case for the 80 but seeing the problems with the zinc case collabing with a company that has more experience with it is probably for the best
$259 ying75 
anyone keeping tabs on Thermal V2?
PCB calibration is all that matters, case won’t affect it
It’ll only affect the sound profile maybe making it a little deeper vs other cases (GT80, PCR etc)
If anything if you want to mod it, it’ll make it more annoying with case bottom screws, but I wouldn’t recommend removing them (fluxes) without stripping it down to the switch plate or you’ll break the legs off them
yeh i agree
Damn my ow60 still says ready for packing, soonest arrival beeing the 24th
Thanks guys for the reply 🙂
idk
u happy?
Hi, I got my wooting module. I just wanted to ask that should I use the included foam between the pcb or the silicone that comes pre-installed? I want more of a thoccy sound profile.
huh, with FN lock you can technically have a profile within a profile. Not sure if cause issue though
If u want toccy throw the wooting out the window and get a mx board
If you want deeper sound use foam
okay
deeper sound profile use foam,
higher pitched sound profile use silicone..
thocky in HE won't be achievable easily, the closest switch to thock is ice ultra
okay thank you
yes I did get ice ultras and owlabs
if owlabs,
i prefer the silicone to make it higher pitch (just preference)
and ice ultras silicone
would be lovely for me
okay I'll give that a go too
just find ur sweet spot
ah get that shit out of ur life
😭🫡
this is preference
just gonna test my guy
(☞ ͡° ͜ʖ ͡°)☞ ⁿᵒ ᵖʳᵒᵇˡᵉᵐ
ur ice ultra sounds really muted w/ silicone pad on my build w/ alucase. It sounds close to thock when using on my plastic build w/o case foam/silicon pad.
what are the best cases for the wooting 80he?
gt80 holy80
Wow holy80 is one of the best cases?
GT80, Zinc alloy
https://spkeyboards.com/ legit?
Your ow60 shipped yet?
his fedex person gave it to me for free
Nope
🥲😭
tf you mean lucky
Astrolinks I think
Not exactly sure what a proprietary mold entails though, or why it’s not wanted.
so active here
we be yappin 
@gaunt plume https://detail.tmall.com/item.htm?id=926003283582 all pom gateron sakura
cheap for a pom switch
imo
that the fedex person gave it to him for free
Holy80 clears
I spent a long time talking to Geon today on a great many different subjects. I quite enjoyed the conversation, looking forward to what comes of it.
something I’d actually see fedex do 😭
geon raw recolour
geon well done HE
pink wooting switches 
arent those the scented ones?
I did not sniff them
I was unaware that I was supposed to
I don't think I would have sniffed them even if I were aware
You are supposed to sniff any new switch smh
Only the lekker ones
@left depot
😳
Great meme for this hobby 🤣
every time I see another brand with a Miku keyboard I want us to make one even moooooooooooore

wooting uwu x miku









