#đ§âkeyboard_modding
1 messages · Page 643 of 1
kinda scared if it dont fir
Profile, material or feature choice?
Any MX stem keycap will fit
Most profiles will work
Just donât buy some weird Topre thing and you probably fine
Yeah like 99% of the keycaps you will find will work
any good specific brand?
Consider contacting Wooting for warranty support
https://support.wooting.io
Pick the category and issue you need help with, and we'll guide you through the process.
is "Akko" good?
@glacial wind - https://zenaim.com/en/blogs/news/250430
æŹăłă©ă ă§ăŻăæšä»è©±éĄă«ăȘăŁăŠăăăăăŒăăŒăăźăăăăŸăŒăłăă«ă€ăăŠăZENAIMéçșăăŒă ăźèăăăăăŠZENAIM KEYBOARDă«ăăăèšèšăšăä»ćŸăźæčèŻæčéă«ă€ăăŠăăçŽčä»ăăŸăă æŹăłă©ă ăŻă仄äž2ç« ă§æ§æăăăŠăăŸăăâ ăȘăăăăăăŸăŒăłăăŻćż èŠ...
Dead zone discussion
Theyâre right in that some deadzone leads to better usability
I always find it hilarious when people ask for absurd levels of sensitivity mixed with zero deadzone and I wonder what theyâd even use it in
Most folks would end up making their own valorant or cs strafing inconsistent if they tried to play with some of the absurdly low settings they request
Yeah but less then 0.2mm puts you in the zone of it being too low that you get a ton of false actuations
The way they summarize it as tilt vs press is a simple visual for most people
Yeah I think venom has had its own back and forth with it too when they first tested 0 deadzone in the beta versions and it caused issues
If it were true of course. #đ§âkeyboard_modding message
The ability to distinguish can be muddy but the visual is great when trying to explain it
that enforced deadzone is odd, I donât think it works yet
Wooting can 
Well yeah, but we are talking about the flux maxxers who have no idea what they are asking for
Smalla numba is gudder
Iâd think Woot has an advantage when entering the road to the bottom game. Only they have firmware that can learn from the switch and dynamic change the deadzone afaik
Doing the literal impossible according to Zenaim lol
They donât have devs with magic hands for sure

Simon 
Where flux switch detector đ„
LOL, i think that will be hard to do
I might be wrong, not sure
Fluxes have issues on benom
Donât think youâre wrong. There isnât a board yet that can display true raw flux before calibration afaik
Oh
itâs about fluxes lol
Some keys dont actuate at all, unless you manually calibrate it
No issues at all on wooting rn tho
Venom has manual cal?
Apparently it might be related to wildly out of spec magnet consistency
ye
I installed some yesterday but haven't checked them yet. I'll try and do that today
Yea, some magnets are stronger and I wonder if its possible to add them in switch selector in future
I usually donât mess with Betas honestly
Iâll wait to see what happens to the Stable version
Stable and beta both suck, alpha is perfect 
When you select Raeds on the beta, you can still change the deadzone below 0.3, so it either might not work as it should or it just stacks deadzone on deadzone đ„Ž
lol
I donât even know what my deadzone is set to
âLatency Maxxerâ, righttt..
I have the Optimum Wooting 60HE+. Can anyone tell me if the gateron Ink V2 Pro Screw in Stabilizers will fit. If not can you recommend any?
Exposed
Why do you wanna switch stabs?
Because these have a much slower return than I'm used to.
Hmm, did you change anything about them or are they stock?
Looks like geon lurks in wooting discord for ideas
No, I just lubed the switches. Not the stabs.
Did they feel slow before you lubed the switches?
You can get other stabs but if you got the Module, youâre better off tuning them that getting new ones.
The Module comes stock with Gateron stabs and I donât think theyâre very different from Ink V2s (they are very different but I donât know if theyâll fit)
lol why? Cuz emojis?
Thanx, If anybody has a compatible list of stabs please let me know. I'm waiting on my GMK 's to get here and was gonna mod the stabs while I was at it.
Per key switch selector
Do like the friction fit pad? I got the pom ttc wooting switches. It sounds amazing but I do feel that maybe it takes some of the sound out.
Any 1.6mm clip in and screw in should work
SW Knight V3s, youâll need to get some lube too.
Many donât too. ;)
Thank you. I'm new to the modding but I'm finding it additive.
Tons of stabs out there. I've been a big fan of the YIKB ones for a while now
Got plenty of lube. lol!
No issues on the HE+. I do tend to prefer the SW Knight's v1 to the v3's though
What does that even mean? Lol I donât get it
With new firmware you can select your switch type individually for each key
Mixing switches on a PCB?
Cool, I'll share some pics when it's done. Thanx!
Thatâs crazy
If stabs under tension are a good recommendation, be my guest man
I kind of want to try these
This hasn't been my experience at all. But just like with the SW v3's others may not have experienced the problem I have
My SW are not very smooth
Like where the wire meets the little silicone in the housing adds some friction that makes it more difficult to press than it should be
A lot of people prefer a different switch for their space bar or just the WASD keys. Sometimes for sound, sometimes for travel distance
They either fit, or theyâre under stress. If theyâre fat, theyâre under stress with the PC plates and donât fit through the metal plates at all. đ
and Typeplus stabs are fat
The pom ttc wooting's are amazing!
how you like the feel of 55g?
For example the issue I had with the SW V3's my spacebar wires kept slipping out when pulling the keycap. I posted about it here and some others had the same problem. I ended up using a V1 wire on the V3 housing.
Honestly the best thing to do is keep the stock stabs and clean them and then tune from scratch
Yeah stock stabs rock
Need to figure out my stab problem at some point
Space bar feels solid but rest of the mods are frustrating
I lubed them with Krytox 205G0. It sounds really great. Even with the friction fit pad.
One thing I noticed on the venom that helps is loosening all of the PCB to Plate screws and then putting the stab caps on and testing them. Then tighten a screw and test again. The stab cutouts are tight and can tweak a little if the plate is even slightly not aligned
Its good.
Damn ok
Will do. Thanks.
Itâs frustrating Iâm not done with it. đ”âđ«
Switches sound great
Two types of people. You either enjoy tweaking and tinkering or you don't.
Now you gotta stop spending money on boards and start buying more skins!
lol yeah Iâm done. Gotta sell my Wooting
Still waiting to pull a knife at some point 
I think my loadout is chill
Always on the prowl tho lol
I enjoy it
Even with just one hand
Tried at least 6 configs on my neo
Lubed and unlubed stabs one handed
And prep 2 PCBs for it
Now time to do it again td
Switches arrived @stray tiger
Let the fun begin
What is better/worse magnetic flux and what does it actually do on a functional level, regardless if the avg person can feel the differences or not?
I hear about it all the time but never actually knew what it was
would "worse" flux values cause ghost inputs, double presses etc?
any idea when/if the HE board is happening?
May 2nd, so 2 days
same time?
yes
its 1 am for me đ
Consistency from switch to switch and the most important is that the values are within the range of the sensor. So itâs not higher flux = better.
Worse would be very inconsistent flux values from switch to switch like the Fluxes have (allegedly).
time to flux max and swear i can feel the differences
and blame that for my reason being hardstuck plat
also, wtf are gateron luminaries? lol
A new switch that doesnât exist yet
supposed to be a fan composed switch
if they will listen to everyone who submitted their switch is the question..
knowin my ass i'll buy them too
imagine buying them
don't gotta imagine...
crowdcomposed (they gave a few away and everyone who submitted their switch a discount)
@tawdry tree 
i got duhuk rocks coming in tmrw and ur ice sakuras whenever aliexpress does its thing
I wonder how long itâs gonna take
my excuse is that my friend's bday is soon and that i'll give him a massive switch variety pack for his new wooting
it'll be a gift and a curse if he decides to pursue his curiosity
the only one i really regret getting is the latenpow deng gods
âfree sampleâ and hooked after that đ
eh whatever, theyâre like $18 for 70
right?
đ
it's like a drug
first time's always free
it's more of the excitement i harbored for it, took like 2 mo to arrive
i was incredibly disappointed to say the least LOL
though i do like just having extra switches i don't use for frankenswitches
which i mostly just use for my stab keys
akko astrolinks are there too, straight up don't like those
they look cool i'll give em that
theyâre good with Raw HE tops (or any other Hejin top with separate diffuser).
they got way too much friction, even after hand lube
I still havenât received an update on mine
is hejin the creator that "style" w/the separate diffuser
I won
obviously, you're gonna make ur own opinions, but just don't hold too much hope for em đ„Č
Not really but all top housings like that of the Raw HE will work well with the Deng Gods.
ohhh okay
I lost all hope when I read PC top, so itâs fine lol
what's bad/unsavory about that?
I ordered them knowingly
not doubting u, just straight up don't know
Not bad per se just that thatâs 99% of magnetic switches
ah, so it'd be like a predictable and non-unique feel sound to you?
there isnât a magnetic switch with a nylon top iirc
anyone here using the gt60 pro?
yeah, just something different would be nice rather than the 17484628384th recolor
gotchu
wonder what non-PC top housings would fit and work well w/ti HEs
also that name makes me feel like there's titanium in that switch lol
i wonder why most switches are a combo of pom pc and nylon? are those just tried and true?
surely, there's other types right
You didnât even acknowledge the fact that your question has already been answered and people tagged
Lame
lol i did dm them bro calm down
I think PC top is just so it can be transparent for light and be one piece rather than a separate diffuser
Common spammer L
https://kineticlabs.com/blog/overview-of-popular-mechanical-keyboard-switch-housing-materials i googled it and found a material i've never heard of that supposedly has less friction than POM
i never heard of UHMWPE and that is also an interesting name lmfao
that makes sense, yea this is quite interesting
bro i literally dmed them im just trying to get in contact with people on it chill
mech has loads of materials
mag has just nylon, PC and POM for the housings
lol Iâm chill. Are you chill, bro?
bigchill
i see i see
all g then
wonder why HE switches haven't tried other materials, outside of the duhuk ones
that look like them expensive organic japanese eggs
because weâre getting milked
fuck man
$1.2-2
it's working
is crazy
wonder if there's people who've made functional frankenswitches w/top housings from mech switches
i'm just full of wondering lmfao, going down a rabbit hole
not without a bit of work
oh right u and one other person were like the goats of frankenswitching
fsiana used a gateron zero degree top on a kailh magnetic one iirc
haha, I personally didnât try it
I donât like cutting up switches
you had to cut off a little thingy on the kailh bottom
to make them fit well
that sounds worse than lubing ngl
any new frankenswitches you've developed recently?
it is đ
nope, itâs not really worth it anymore I think
I been hearing people franken trying POMâs I think
Idk what theyâre mixing up tho
at least for decreasing wobble
Phylina is a monochrome essentially
i see i see
they donât sound bad either
wait what is phylina
stolen from twitter, I donât have mine yet
wtf man now i gotta buy these
oh
safe
..for now lmao
yea i went down a twitter rabbit hole last night til like 3, looking at a buncha HE switches that i've never heard of
twit is a good place to find sound tests
more so than this disc lol
for new switches*
ya i realized that last night
Testing on a wooden case makes it hard for a good comparison but they sound nice and poppy
a lot of them didn't list the plate material which was sad
The Phylinas are a bit clackier compared to the IU's in this case, (without knowing the plate used)
Nah, UR Studio Ice Max - Ice Ultra and Ice Ultra Sakura (which is a recolor, I think you got this one).
A lot of that is going to be from the wooden case
my guess is that it's the white PC plate, i can kinda see it
Yeah
Itâs a Raven61 and stock plate is alu iirc
donât think there are other plates available for it
U enjoy tweakin with one hand
Sounds like a blast
Going to be my first time trying caps from these guys
Heard good things from them
would love to hear what you think
they seem to have nice designs, just no international kitting at all đ
Should I stream or neh
When in doubt, stream it out. But I'll be driving for the next 2 hours so I can't watch very well but I'll tune in if you do.
Btw guys
I wasnât trying to mock. Iâve also heard nothing about them
I got a question
If i built a keeb have it sent over to the person
With proper firmware installed
And the person plugs in she or he's keeb
yeah ik i just realized my typo from ur msg
More likely use cable not plugged all the way in. Make sure they are using the stock cable
Theyre the stock
Its all the way in
As i got told
Ill ask the person to make a community post
Then yes it could be the JST cable but the ones on the 80HE are tight
Ok then tjats odd af
No way its the PCB
Shit is like protected by an abs and a travel case
And a dhl box
Yeah if they are using the stock cable in a known good port and both ends are 100% plugged all the way in, then they could check the JST cable
Ok thanks
Either wya ill make a community post about this after checking the JST
Cable
Alr stream it then
Ima try to finish before alexotos stream today
6pm for me when it starts
hi! does anyone know where i can get the 3d print file for the top plate for the 60he?
drop the mod specsđ„
may i know the name of the purple case?
frog mini
I've seen gray, green, red ones too
from older og runs
ngl, i forgot what colors were there
the cream đ«Š
lol
leggera or OG frog?
eiter OG Frog / Leggera, i will say yes to frog
You should post the build video on YT and might surpass mikeytypes on video length 
People want deadzone so sensitive that the rotation of the earth and gravity trigger their keyboard to actuate
and think they won't have errors at those levels
i guess leggera since thats the newer stuff
I wonât have errors, my fingers are different đč
those switches are oiled up
Trained using only the finest switches
just like some else rn
im trying to get close to muted thock sound even though its hard for he boards
and i tried the T mount, it's amazing with burger mount...
but i still suggest to get the G mount
absolutely amazing, one of the bounciest Tray mount i've every build
right now i got tofu 60 redux with brass weight, foam, wooting pc plate, geon raw switches and wooting keycaps
sounds like muted "thock" to me
so many conflicting answers on google
really? sounds a bit loud compared to aligner beautiful setup
if anyone have it, pls elp
maybe try to tape mod it
Tape mod bleh
well based on ur build specs that should result in muted "thock"
also take sound tests with a grain of salt
With.. raws?
yes r1 should be like numbers/f row
10 layer minimal
@tardy obsidian u can look at this for example
I'm considering removing my plate foam to see how it sounds with my tee hees
it's nice
what plate?
i mean u can put almost any switch in there
and it will sound like foam
on my previous leggera (rip), i used CF + no foams & tee heeessss
Yeah but wouldn't it just sound like a muted clack
Or is that just what thock is???
What the hell even is thock
so it's muted
if it's a deep clack, it will not be muted..
but deeeppppppp
Thock is whatever Hipyo says it is on his next video
True
soo every sub $100 amazon kb
cuz thats all he uploads
u sure? r4 is the highest one on this set (optimum) it looks like f keys idk tho
u can also go based on the side profile of the keycaps
Thatâs painful
if hes a "kb expert" cuz he owns like 200 $100 amazon kbs
man why didnt they just make a post abt this đ© its so confusing
than im an "audio expert" cuz i own 50 $20 iems (i dont)
Keyboard expert, barely gold in CS GG
And sponsored boards
Then*
hes sponsored by like all the chinese kb brands that make those type of kbs
yoo, i will have extra duhuk 70 switches...
should i just go for rawhuk
fucking rainy, meletrix or some shit
i need to buy extra 15 switches tho
YOLO brotha
rawhuk are deeper than owlab ti right?
i like the look of mily white tho
Idk if theyâre deeper but I donât think itâll have the weird quiet top of the duhuk, but worth trying
Never tried either since Iâm a box stem fanatic
true, but i need to spend minimum 8 hours 
and i might spring swap to 72 gf
Price of salvation
yeah u like that BBS
đł
what
anyone here that have tried the rawhuk and owlabs TI?
u like big box stems
cam
Technically smaller boxstem 
alright
also the drunk homeless man
đ€ âïž
@fluid ravine stem swap & spring swap & lubing those
uHm AkTuAlLy ItS aN OcTaGoNaL bOx StEm, ItS rAtHeR sLiM aNd DiScReTe
@fluid ravine u can finally get big gains
i'm in love with the visuals of the rawhuks tho
1 arm at a time
HAHAHAHHAA
Tee hees would look so good in a mocha tofu with matching keycaps
true
full brown
Noctua 60he
like a chocolate
i think of someone snorting when reading this
đœ
yoo 80he need 85 switches right?
I don't want to count every single of those keys
For 80HE youâll be ordering 90 switches regardless
what switches
Gives you extra 6 in case you need em
nah, i'm buying them from local vendors
saving tax
alr bert
Bro just hit me with the aktually, fair enough 
@fluid ravine ermm u should film and spring swap everything
or else ur getting perma'd
LOL
shes not wrong
"I like my left hand" (c) Frogson
maybe i gotta lube the switches. I havent done that yet
what would you recommend?
that prob wont change sound
that much
yeah i know that
but these are factory lube
yeah my right arm is alot bigger than my left arm
dont ask why
and it sounds like it needs to be lubed again tbh
forgive me im also pleb
tuan fingering that slot real good
what case is that?
tuan? neo65
idk
the only ones ik are the gat milky yellows and gat black inks
@fluid ravine swear thockdaddy gave u unlubed switches for u to suffer
on kbdfans
pbtfans salt lakes
yup
yeah I like that pbfans are actually doing the nice font now
never liked their og font
keep in mind they are pbt dyesub
Update Pre-order dateïŒApril 24th - May 1st Pre-order ETDïŒAugustïŒ2025 In-stock sale: April 22th Estimated production completion date: April 19th, 2025 (03/29/2025) In production (2024-12-26) R1 sample will be completed in August (2024-08-05) Working on the R1 sample (2024-05-31) Inspiration Inspired by the salt lakes fo
same xd
Unfortunate
ok so i finally figured it out lol
its the opposite on the optimum set except the windows/ctrl etc keys
very weird
Just started
damn who do I watch
@fluid ravine https://www.twitch.tv/alexotos
Just got back home. What switches did you go with for now @fluid ravine
Me with 0 viewers
Watch Tuan and then he can raid Alex
I can tell lol

Bro got the keyboard chirping
Proof that Tuan'[s voice is deeper than on stream
he has to pitch shift it up so we don't have complexes
I donât stream so not inaccurate hehe
nahh this is so nice
I wish I got milky yellows but I already got mx blacks on the way
@stray tiger should i lube the milky yellows?
I think they sound way better when lubed
yeah i think so tooo
hmmmm
if i manage to finish all my work ill lube them time to time
even the black inks
i could lube a few rn
Man your video is 4s behind sounds
mmmmmmm~~
watch faster
films or nah
yes to make u do just a lil more work
I can't manipulate time
is that a sticker of u

TuanZ
You cant compare 2 different rows. Gotta do SD and JK
Shi
I'm struggling taking milky yel8out rn 2đ
xd
Wondering if I just go from Owlab Ti HEs to UR Studio Ice Ultras
K boys, I think we found the one.
including the same humidity, temperature and XAUUSD price on the market
very nice colors
Ill be buying some more next sale for sure
sounds like a đ
I want there
Also fed these ladies
feels dampened
The smoothies are a deep switch
When I get it back if I want to brighten it up Ill swap in some Hyacinth Sillyworks V2U's
for me it sounds more related to the other specs, the switch itself is nice sounding
maybe its a combination of plastic plate and case
curious about the weight
why do 2 of them look elevated
They squint a lot
They have massive eyes when they open them
@stray tiger the current config I really like, with whatever was in the spacebar
i would make a joke but im not gonna get timed out like joshiba
LMAO
I still canât believe he said that đ€Ł
Same but I did like it without the weight
I won't be typing on it though so I'm not too caught up on the sound. It'll be a display board
makes sense
It feels surreal to live here
if you're getting this solely for the pcb there are WK neon ones hehe
u live in the perfect place to farm windows default wallpapers
isnt neon the pc one
also the shipping from luminkey bends me over my card
it is đŹ
Unironically might set my wallpaper to one of the photos I took
Probably in the minority here, but I smiled when I noticed my GMK Rubrehose finally starting to shine

shine good
its cuz of the love and care u put into ur keycaps

Had my optimum case coated in black, thoughts?
Powder coat, matte black!
i need some suggestions / recommendations... what switches would sound nice (thocky, creamy) for Wooting 80HE (i also changed the case to GT-80)
owlab ti he
You know they are clack
they're the best option he has
tohck
we need a new sound genre called thonk
This was done so well. Amazing 1/1!
snow rabbit ?
he's joking, there isn't such a switch
oh hahahaha
i cant find a switch thats nice...
keychron k2
monsgeek M1W-HE
Akko cream yellow
Gateron Magnetic Jade Pro
Gateron KS-37B Magnetic FOX
Everglide Sticky Rice V2
GEO75 HE
kinda checking on these now
the owlab ti is basically the best 'clean' sounding switch right now, if you're looking for oldschool mx thock it doesn't exist at all in HE due to switch design
checked it, sounded wayyyy too clacky for me
im a more muted, creamy/thocky kind
17 layers of tape
yeah the tl;dr is they are all clack. There isn't a single creamy thocky switch in HE in regards to what you're asking
your entire list there is all clack too
got 5 on already hahahhaa
damn

until someone redesigns magnetic switch and finds a way around having a magnet in the middle making everything sound clacky you'll just have to pick a clacky switch
My Top 5 Creamy Switches All Time!!
KTT,Kang,white,v3,Akko, keyboard,cream yellow, KTT kang white v3, creamiest linear switch, sound test ,heavenly,Thocky, creamy, Thocc, Zoom75, zoom,75, Wuque, Studio, WS,Zoom65, Creamiest, Gateron, oil king, Durock pom piano, Owlab, zoom75, creamy keyboard
this makes my brain melt
that's an mx video
but i know HE has its draw backs, but trying to get as close to this
it doesn't exist. period.
i know it will never be the same or close
you will not get close and no one before you have gotten close
we've been there
sadge
embrace the clack
ur ice ultra? sounds deep and clean from vids
basically think of it like this: we've have 1937492 people come in regularly for the past 2 years and not a single one has managed to get creamy thock
he wants marbly thock like wuque morandi style. Not just slightly deeper clack
no , not mine, i wish hahahaha
just get a good clean sounding switch
ti he for instance
and find a plate of preference from there
Then go poms
Gateron Magnetic Jade Pro
TTC KOM RBG
Everglide Sticky Rice V2
And carbon fiber plate
somewhere along these lines
tried, found PC plates are thockier
all of those are clackier/higher pitch than owlab ti just fyi
how I wish there was one..
it's why we recommended owlab ti at the start. It's basically the best of all the 'clack' options right now
Its my go to switch atm
yeah. im sticking with my owlab until the next best comes đ
Same
you have tiger lite w/ owlabs right? care to share some soundtest? đ I want tkl too
Later, I'm outside, but I do bring that keyboard with me today
So expect one at subway if the sound is not too bad
hmmmm it does sound deeper than the ones i mentioned earlier
äžèšçŁæ°ăčă€ăăăźăżă€ăăłă°ă”ăŠăłăăćșæăĄæăźè»žăăŹăæŻèŒăăŠăżăŸăăăăăČćèă«ă©ăăïŒđ
âïžGATERON Jade Pro
âïžOWlab Ti HE
âïžAkko Astrolink
âïžPhylina Thunderbolt
âïžUR Studio Ice Ultra
æ°ă«ăȘăăăšăăă°ăȘăæŹăŸăăŻă”ă(@zinbow9deus)ăźDMăŸă§ăæ°è»œă«...
was this factory lube ?
all of them should come pre-lubed
i like overlubing mine usually
just waiting for my poron foam to arrive to see how much it changes the sound profile
I've seen this question on Reddit, but just in case anyone is wondering, Glorious Raptor HE Clicky switches â while not officially supported â DO work with Wooting's boards. (Would imagine that applies to Glorious's other HE switches as well.) I installed the Raptors in my 80HE and leds, and mods all work as expected. So far as I know, these are the only clicky HE switches on the mareket. Might have limited appeal for most gamers, as the click won't necessarily match the actuation, if that matters to you. But they are actually pretty nice for typing.
tried using the car sound dampeners, sounded horrible, it was so clacky
none
yeah went thru this already hahahah
looking at the owlab ti right now
mehh wobble doesnt affect me, i usually bottom out when typing
bottom out wobble exists
thanks btw
so far dont even feel it on the lekker v2
so i considering comparisons, i think i should be safe
you will feel it when you try tighter switches
ok so now im stuck between Jade Max and Owlab Ti
friction issues
something about getting stuck or something right
take a look at ur ice ultra, they are deeper than owlab switches and have similar ish wobble too
damn... but they sound so nice
lemme seee
Theyre on aliexpress
i have taobao here hahahha i can ship direct from CN
why cant i find any sound test for ur ice ultra lolll
this is 60he so sound is gonna be different
but theyre potentially what you want
ok so now....
Owlab Ti
UR Ice Ultra
but Owlab has more sound profiles to hear on videos
ur ice is new ? i dont see a lot of sound test on these
they're just 1 of many variations of very similar switches basically
the tl;dr is there's like 192749192 variations of the same switch. Owlabs are just one of the best ones with cleanest sound so it gets recommended the most
would it be stupid to import like 1 switch of each hahahhahah
nah you can do that if you want, although honestly speaking there's not a huge difference between most of the switches if they're in the same rough 'generation'
basically it goes like manu has a new mold that's x tight and smooth, then 1937482 switches come out in that rough spec, then next gen comes out that's a little bit tighter and smoother, then 18273929 switches come out again etc etc
https://www.youtube.com/watch?v=FQ9IPzQIn5U&t=3252s u can compare ur ice ultra / geon raws from this.
ćäœăŻăăăŸă§äŒžăłăŸăăă§ăăăăăăăäŒžăłæ©ăżăŸăăăăć°æ°ă ăăăšéèŠăȘćç»ă ăšăšăăăŠăă ăăæčćăă«äœæăăŸăăăć°ă çČèŁœă§ăă
èæŻăźăă€ășăźæçĄăŻă»ăŒăšăąăłăłçšŒćăźæçĄă§ăăæćă ăăŻćŻăă«èăăȘăăæźćœ±ăăŠăŸăăă
00:0...
there's even some switches that are just recolors of the owlab ti, like the duhuk herz which seem to just be recolored owlab
the fun part is when they add a random word to make it more confusing
ive been at this for 2 months
like there's ur ice and ur ice ultra but they look almost the same in both look and marketing so sometimes you have to look carefully when buying
so far the nicest ones are the ones you guys recommmened
cuz mainstream kept pushing at jade pros or max
but from both sound test im hearing the ice to be lower pitched and deeper
might go with that
or just buy both LOLLLL
mainstream is just behind by 6 months or whatever because it hasn't spread out to general population yet since these switches only came out recently
make sure you get ultras and not ice maxes or regular ice
at this point, im like friggin $1.2k in... i dont think i can make it any worse
just buy both. for me I prefer the ice ultra for the deeper sound. but my order got cancelled đŠ
oh you can. There's that owlabs raffle coming up soon
sorry to hear that
you could win the chance to increase that spending another $400
but i dont have that kind of issue, i have access to direct manufacturers
NOOOOOOOOOOOO
or sell for x2 the price if you win hahahahaha
no joke the dealer in aus had to cancel some owlabs orders in the last raffle because the guy tried to sell his raffle win before it even shipped
he literally won then immediately posted the raffle win to the local mech market groups selling it for 1.5-2x
so they tracked down his order and cancelled it lol
lol really bad move
yooo the Ice Ultras are hella cheap
84pcs for $SGD 35
yeah a large amount of these switches are very reasonably priced at like 0.4 or so per switch
was ready to cough like $100
where link pls
it's kind of bad news for @sacred elm though, he's had a rough day
ohhh the ice ultra sakuras
his 16mm f1.8 lens is still not in stock at sony store korea
it looks nicee, but it defo affects the rgb hahaha
and i like my shit white
this is the clear ones but out of stock https://kprepublic.com/products/ur-ice-magnetic-ultra-switch-linear-for-magnetic-mechanical-keyboard-35g-50g-100m-3-5mm-pc-pom-700gs-factory-pre-lubed?srsltid=AfmBOoqFhpr7eW9M6_8I9xpRcbhrJ7PVGHSbhUL3J3AnhGlbfAmBrPzF
i know hahahah thats why i said i can buy from CN
i work in procurement
nice
#đ§âkeyboard_modding message he posted comparison b/w sakura and owlabs
oh gawd... im gonna spend the whole weekend lubing
yeahhh so i was right it does sound deeper
sounds like cope
its prob his mods on top of it tho
usually is mate hahhahaha
believe
@distant crag btw, + shipping from CN is $41 SGD
dunno where you at , could cost more
if krepublic wont restock the clear version, I will just purchase the sakuras. free shipping
nah bruh that's the expensive one
lemme hook you up: https://item.taobao.com/item.htm?id=904427363724
u have link for the blue ice?
cant find any clear ice ultra anymore
same price bro hahahhaha ,its cuz of shipping
the original store has blue ice, but i'm waiting for the dealers to get them
it depends on location
ohhh link for the original store please
this is the same one i shared to him
was just about to say hahahha
this one has blues
oh guys
UR Studio Ice and UR Ice Ultra
is different right
its not the same ?
yes dont get the old one
kinda confusing
old one has a phat ass
aight
not skill issue, like it's not bad...
but it's kinda loud
i put tons of lube still loud
i tried to retune them
still loud
only the spacebar
đ©
prob a stabilizer issue ?
try different switches, caps
stabs really should not affect the sound
put a single raed switch on spacebar, problem solved
the original wooting stabs are hella rattly
hell nahh
yep
that's the reason i bought module
i swapped it out for the nylon staebies 2.1
i was against it at first, but its actually solid
it changes the sound profile by miles
I think there is no point for asking staebies rn
there is no vendor's in my country that sells them
alrightt
i might try to purchase from taobao (?)
maybe
he doesnt know about the wooting stabs, so he said he cant comment'
here you go
he said try the knight stab v3
heumm
thanks
but it says Thock on the Switch Sheet
i give them the medicine hidden inside the candy


you know it's going to be an interesting day when you wake up to chess drama news
that seems to be the rules
haha Chess drama
i'm still confused at why someone would cheat in a charity tournament and then deny the blatent cheating, then drop out and get banned and pretend it was an accident
it's like masterclass in picking the wrong pr move over and over
question
consulted with Pirate
does swapping out the springs in a HE switch affect anything ?
like i recalled reading some saying HE switches cannot do spring swaps
spring weight
gateron-lekker-raws are interchangeable springs
im looking to up the 35gm from the ice ultra to a 50gm
so it kinda depends right
never used ice ultras, so not sure
if they have a conventional design like gateron or raw/ti he then replacement springs will likely work
also something about it affects the magnets
hmmmm i see
not sure how the mechanics work
35gm is just hella light to me hahhahaha
35 is initial
50 bottom out
im using the lekker 45s
its too light for me
60s is too heavy
thought 50 would be a nice middle ground
ohhh ok, i guess my brain read it as 45gm initial force
5g lighter initial force and 10g lighter bottom out than L60
so i dont need to swap hahahahha
no youre right, its 5g heavier
initial force for lekker 45 is 30gm
this is 35gm
yes
They can do spring swaps but only with larger HE non magnetic springs
did you see a korean navy seal hit johnny somali
Does anyone know if at this current date thereâs any new sellers/companies that do custom wooting straps from your own design? There used to be a few but they all shut down.
Yeah thatâs old news, itâs just new again because the internet gave him money to pay his fine lol
oh I see
either way johnny somali is screwed because he distributed deepfakes of people right after korea passed a giant law against deepfakes
it was literally national news of deepfakes being an issue and entire news cycle was how to stop it for months, then he came in and did that lol
couldn't have timed it better to get himself in trouble. I think it was literally like 1 month after the government passed new laws making punishments for it insanely harsh, then this clown came in and made everyone in nation hate him while using deepfakes to make fun of people
that's one of those things that is so outstanding to do that it almost seems intentional
at least I would expect it from a guy who is asking to be stream sniped irlđ
hi yall how do yall fix keycap stem fitting loose
Anything for content
đ
this looks like a convenitonal stem was increased in height to become box-like
yeah raesha did something with the stems there where some photos make it look replacable even like ttc
i don't really get their marketing bit about it suppression vibration though - surely you wouldn't want your switch to be changing the actuation/vibration of your presses and you'd want software to do that instead
how does that work?
stem seems to be in 2 parts and somehow they claim that helps vibration or something
ah my favorite permanent earth magnets
so like ttc
yeah except it's round and not fully stuck there
their flux numbers are also +-70 at bottom out so i don't know what amazing magnets they're using but they must have used the cheap amazing magnets lol
oh... so it hangs in there kinda
intuitively feels like it would even wobble more lol
yeah they're basically claiming that this movement will help reduce vibration effects on presses, but to me it sounds like it would just make it more annoying for good software to compensate properly
like you're actively making the switches move more and saying it's going to help lol
yeah you'd think magnet actually moving would be so bad for precision
then again drunkdeer's rt match and all that stuff has been a messy inaccurate disaster in tests so maybe their software is so bad that this is good for them
drunkdeer software is dogsjiot amyway
or at least it was
last i head it was awful though
still dogshit, latest tests say the a75ultra polls at 2k, scans at 2.6k
I think switches have pretty much plateau
Doesn't it cost like $250?
the ultra places 4th
...from the bottom
the only selling point is that it has a ghetto version of the wooting owlabs case
that looks kinda ass
thin metal sheet with springs feels like it would be pingy
which irok board is this?
ball catch on $50 HE?
insane
yurrrr
soft crack
idk why but milky yellow spacebar just smacks
indeeed
i suppose if i film these they should make them sound fuller
which would be great
dam I should've got films for my mx blacks probably
springs and films
cherry springs are shiiiiiiiiiiiit
and you should lube them ofc
best to buy them unlube and lube em yourself
film and spring swap
otherwise everything about the mx blacks are great
lmaoo
i need nixies :C
might pick up some deskey films
or tx switch films idk
I could also order some hmx from aliexpress, though the selection is not that big there
hmx probably dont need anything
nah
hmx lube and shit has been consistent
these geon switches made by hmx even had springs lubed
yurrr
mg75pro
what do you mean? Sounds great
there's no rattle at all
but still sounds too loud, i build on a mech before using the stabs and sounds little bit better
might be because the bottom row is kinda hollow
did you put foam in? Sound loudness like that isn't usually to do with the stab specifically


