#š§ākeyboard_modding
1 messages Ā· Page 628 of 1
What do you think Iām doing in this photo
I saw those Oreo bois and was getting weird vibes
Lmao nah I just removed em rn
Might throw em in the OG frog mini
Thatās what I had the Fluxes in
Someone just use poron
I have a mod for that too
š„
Is cutting the silicone to make it poppier
Tru
there will be extra flex there no?
i dont like flex
Not with a aluminum plate
Would you recommend the same for marbly clack enjoyers
With a softer plastic plate , yeah
If you donāt care about cutting your stuff then yeah
Itās something to try out
you can still reuse it so its fine
Damn, this corsair keycaps is so op
The hard dampening is kind of cringe
Yeah if you cut it like I did, itās not destroyed
hi, what cables can i use with wooting 60 he - I know its recommended to use the provided one, and usb c cables under 2 meter. are there any other criteria that should fit the cable?
I am trying to swap the yellow braided cable that was provided
Can still reuse the piece I cut out
Word thx
USB 3.2
I got the silver one same as Mr cam, def recommended
Time to release my balls and snip some silicone
š³
alright tnx
I have 1 usb 3.2 port and 4 older one. In BIOS no-one is shown as 3.2š¤
oh yeah how do i check this
When Iām trying to turn off 3.2 every single port is didnāt work XD
Color of port, Device Manager, and also depending on the BIOS, you can do it there too.
Your motherboard should tell you how many of each type of port you have, if they arenāt running at those speeds, check your BIOS Settings and/or Update your Chipset Drivers
Looks sick!
Yeah, I figured that out a couple of days ago. For some reason, the blue USB port that was supposed to be 3.2 shows up as 3.0. And one of the default ones is actually an impostor and turns out to be 3.2.
Oh interesting
But itās still a mystery why, when I disable the 3.2 port in Device Manager, absolutely all of them shut off.
If this sounds bad, I blame you , just sayin
Do it 
just dont use it at this point
Holy Frankenstein plate pad
š
thank god you dont have to use that anymore
eww
ok so from what i read, as long as i dont have the wooting tachycha mode or whatever on along side the rgb lights, other cables should be good right? i have 3.2 cable - just that its 3 meters long
Well someone else does..
The guy j sold my optimum to LMAO
2m is recommended
3 might be too long
alright thanks
try all your cables, turn on tachyon mode and set rgb to 100%
if you dont see anything wrong then good
well someone else doesnt have my respect 
use it
LMAO
So fuck CAM and that person

Just be careful around the spacebar portion
you stopped using foam there?
Do yāall use swagkeys knight v2 stabs?
Depends how Iām feeling but yeah
V1 or v2 or v3
Papa am I cool š„ŗ
Ty mr cam
joshiba thinks you are cool when your neo arrives 
My package got delayed to Monday instead of today and AliExpress gave me $2
fckkkk, cant wait to get back home to try fluxxieess
whats that keycap called
GMK Rubrehose
Fuckkk cant wait to lose my mind over fluxies for not being able to get them in a million years
cookedš
For real
They did you dirty
they will probably ship yours in 2 weeks, when they restock
Pops counting on me 
Very
very cooked
New kittens
2 x 2 cooked
Blue eyes are gorgeous
Look at those little dagger teeth. Good kitties.

Looks like my boys as kittens but way darker
Gonna be rabbit killers like my cat is š
black

Theres a black cat that usually come around outside my apt
We have 2 black ones and now these 2 Grey ones
I wanna cat but house will explode if I get it
lab + cat not a good idea
Beri nais
Wait they're so fricking pretty 
gg siliconš„
Mr cam made it easy
Indeed
I was hesitant to cut up my silicone. I know it could still be used, but I dunno.
Is the difference noticeable to you / worthwhile?
Havenāt put it together yet
We now have 4
And are likely getting a dog soon
Praying for a dog
my dog is friendly but idk if its good idea to get a cat
Shhh my froggy is sleeping
For marbly clack gang we want our mids so silicone gotta go
in 60he - to turn off the rgbs, i basically put the slider down to 0 right? or is there a button for it
Our last 2 cats were great with our dog
0%
or just paint it black
Correcto
Ty pops jr š¹
Chunky
My parents seem sold on an Alaskan klee kai
They only like small dogs lol
Idec what kinda dog we get i just want a dog
i love dogs
Same
Chihuahas are sociopaths
I'm not a fan of small dogs but there is exceptions for sure..
I've met some lovely chihuahuas (they still looked like rats though)

Most chihuahuas are assholes though
Rottweilers and GSDs are my goats
I'm gonna get an ak bash
Or a pitty
labs and corgis on top
I like big dogs
No breed on top. Good dogs on top.
Pittys are nice but the gooberment gonna come for ya
Facts
If i ever own some livestock I'm gonna get a turkish boz shepherd
Smallest dog Iād go for is 40 lbs
150-180lbs on avgš„“
Which is the same size as Daisy. š¹
My big sweet girl
so my friend said that if i ever do wanna make a 60/65 board out of a venom pcb it'll be really difficult cause i need a plate to get custom printed for it? (or maybe it was another part, anyway it sounded challenging)
Pitbulls are about my "size cutoff" for a breed id seek for. But if I find a rescue dog thats smaller thst I fall in love with idc about size
Geon sell venom plates of diff materials on their website
get chinese tibetan mastiff
65 isnt out yet but will have their own plates as well
What the fluff
One of the breeds I want make this look small
lmao idk this looks like ai
Lookup a Turkish boz shepherd
Are they making 65s?
Yes
Oh sick
hmm, so then as long as i get a plate from him, all the supported cases on the compatibility list would be enough? also 65 cases seem hard to find too eh
i checked that list and most were no longer available
fluxxxxx
ive got no dog so heres a cat for ya'll š
$600 keeb right there
almost thought i was in the wrong channel for a sec
Me want, but I need some land with livestock before I'll buy one
do u guys know why the screw wont go in the case
Bros pimped tf out
It's Friday
Nice horse!
damn
this dog isnt real dude
For the most part, the Venom 60he has a GH60 pcb layout so it has a universal 60% form factor so it's compatible with other gh60 cases. Along side that you can also get gummy mount cases like Leggera g and bakeneko for the mount since it has compatible cutouts. But if you want to put it in other boards like frog mini og or like derative or wtv, that has a unique mount due to the plate then you would have to get a custom plate for it to work. Another thing is that with 65%, it's not really universal like 60% so it may be a bit harder to find compatible cases. But I assume that Geon will make a compatibility list later once it's out.
Sounds good thanks. Yeah, I still dont know if I want 60 or 65. 65 has some useful extra buttons on the side but 60 would definitely be much easier to find a case for š oh well, I will decide when I get my keycap set
do you guys think its ok if i am missing 1 screw to tie the keyboar into the case
theres extra included with the keyboard
i have some bu
should be in the box
try other screw
i got the other 4 already but the 5th one wont go in
Yup, I'm about to get my 65% board later on, dunno when, but def excited on what it's like compared to 60% cus I've been using a 60% for my whole life lol
Eta on my board is the 30th 
ill try what should i do if i doesnt work
just leave it without a screw, should be fine
alright cause i got the 2 on the left and 2 on the right
just the 1 near the spacebar thats not going in
yea, thats enough
Honestly, some of us don't even use the screw next to the space bar
Just the 4 you just screwed in
yea it seems stable already
why fluxes look so good š³
ill just try doing it a few more times
fluxes look yummy
Not only that, when we use the one near the space bar it makes our space bar sound uneven
so you think i shouldnt use it then?
Cus one side is screwed down to the mounting point making it sound pingy or hollow, or just uneven in general
Personally yes
alright thank you
Yh
ive been sturggling on this for like an hour and a half
Oof
i had to remove the pcb cause the screw got stuck
ohh cool, what ya gettin
I bought a neo65 from a friend
ah that has some really nice color options
This the one I bought from him
Trying to sell s set of key caps rn so I can find one to match that board
big dodge
Was gonna post on r/Mechmarket but I couldn't cus I don't have enough karma 
Rarely use reddit
that cream thoughš„
Oof
Indeed
First cream board on Leggera was when I start to fall in love 
now I'm back on the struggle to find key caps that would fit the neo without having to go through tariff and shit
i use to be blind but the cream has opened my eyes
Lmaooo
gmk only i guess, isn't gmk made in Germany or something
Geonworks
Mum found these in my rooms had to explain itās for lubing stabs and keys and not for drugs
Well I could get from us vendors
keykobo i think is made in cn
But I can't find a set that looks good in us vendors rn
You wouldnt put drugs trough that big one anyway, you would destroy your veins
Exactly
But mum doesnāt know that
I mean those come from my work and believe me Iāve heard and seen horror stories about nurses who donāt know what the fuck theyāre doing
Itās all about minimizing the risk factor more than it is about being skill
youre going away for a very long time
Nooo D:
Well you dont want have air pocket in veins tho
My stab lubing crimes
Get your karma up
I mean thatās more of a handling issue than needle issue
Need likes
We just gonna ignore the 100+ unread messages?
Make a popular comment lol
Yes we will
Well that's why i trust more old nurses
Oof 
True and super fair
too mnay nurses nowadays dont know how to take blood properly
Flux on Alu Plate
Old i mean around 40 to 50 
š«¦
Sounds like america
yeth
@tropic urchin
I had nurses call today to ask which syringe she should used and then proceeded to describe the worst discoloration known to man like that syringe had an entire bacterial colony already built up cause it was left in the patients fridge for weeks
Taking blood is actually quite easy
tell that to the nursed who cant 
same
Never had nurse like that
i had some good nurses but i had some terrible ones in the past
A nurse overdosed my mom and killed her and then they had to bring my mom back to life, they gave her a drug that my moms deathly allergic too and they even had it written on the board in my moms room and still gave it to her
FUCK
anyone used ceramic keycaps?
Shouldnt that nurse should take sterile syringe from cabinet
Oh cause you donāt see those outside of the work field or atleast not directly in front of the patient
Yeah was pretty crazy, my mom said she had an out of body experience
could basically see herself and see the doctors working on her, said she was like floating above her body
i dont trust nurses that look like they are below 30 yo
It was pre-filled
But when pre-filled from a clean room it should be used in no less than 2 weeks depending on the drug
If not less
Thats very stupid
Holy fuck Iām so sorry to hear but glad she was ok afterwards
In Polish hospitals i always got everything fresh
š
š
In hospital everything is fresh
Outpatients tho needs to have preparations done in clean rooms if theyāre continuing treatments from home
Because it cannot simply be mixed and injected on the spot
When it needs to be put in pumps
Or other reconstitutions for syringes
Syringe pumps?
Hold up Iāll show you Iām at work rn
These are the kind of pumps I meant
But in the case I mentioned
It was a syringe that required multiple mixtures
Which outside of a clean room, you can not do more than one transfer iirc(not my exact field)
So a nurse couldnāt just show up to the patients house with a vial and dilute it on the spot
More contamination risks
However, of course thereās gonna be bacterial cultures if you left something untouched but already diluted in a fridge for over a month
I think FR4 and CF + Tape mod are peak for Flux
Never seen something like that
Theyāre meant for easy access IV injections for patients discharged from hospitals
Is metamizole still banned in us?
You screw it in to your PICC line (idk if thatās what itās called in your country but the tube they leave in your arm for easy injections) remove the clip and it flows over the needed course of 15 mins to 4 hours depending on how slow the injection has to be given because some meds give adverse reactions if administered too quickly
Idk about US but banned in Canada
Isint valve iv better
im gonna try going back to FR4 after cutting the silicone to see how it feels again
yeah idk how I feel about the Alu yet
I need to stop plate swapping
Hm?
It's not terrible tho
Did your FR4 sound louder to you than CF
Similar concept, not necessarily better or worse
mine did which was weird af
All just depends on need
Well it is quite strong and cant get addicted to it. Tho why it is banned
I see a lot of everything
Fr4 is op
curious if anyone has an answer to this question
Long story short, risk of lowering white blood cell count into dangerous territories
Hm, well it happends if it is too big dose?
Everyone reacts to drugs differently, if it was banned here probably thereās reasons I donāt know or canāt get into but it was revised in 2021 by health canada and still banned for human use, but allowed for veterinary use
Because i would be fucked if i was in csnada Because paracetamol is not working at me in normal dosages

Thing is people react to drugs a lot differently
Idk how strict or lenient your country is, I know Canada is fairly strict and thereās a lot of drugs here that are outright banned or are considered narcotics that in the US/Mexico you can buy off the shelf
Herz on Ali (900Gs for Woot*): https://a.aliexpress.com/_Ez5fdDS
Well when i was looking up long time ago it was banned after incident where metamizole caused very high fever and u know what happend
I can buy metamizole on gas station

Thatās scary
Tho opioids etc have to be bought in pharmacy
Yes of course
Same in US but
Some drugs that are considered controlled or narcotic here in Canada are considered narcotic in the US
Like dehydroepiandrosterone
I only had strong opioid after I broke leg
Is a strong drug but sold as sport supplements in the US
Hm
You can buy it Walmart even kek
Above average perhaps
When you look at any other countries healthcare they always look like the odd ones
They can only weigh as much if not more than me

Well where i would have to take pill of metamizole i need atleast tripple amount of paracetamol
Soo taking metamizole is safer
And pain goes away quicker
The risk of side effects from metamizole, despite being considered an important risk in other countries, could be a safer option than taking 3x the dose of another strong drug yes
But both are different drug classes so they do different things
They arenāt mutually exclusive
Tho pills are weak and i don't want to get addicted
They mesured everything by my weight when I was in hospital
Thatās standard procedure for a lot of these drugs
Some even need to consider the intake of nicotine in your body because nicotine cancels out the other drugs
And some even need to consider your grapefruit usage
Like imagine taking a drug but because you decided to eat a grapefruit
You had a psychosis episode
It sounds ridiculous but itās the truth
I've yet to take any sort of opioids
Itās weird cause
Everyone reacts differently right
I had some before and it just helped with pain
While some experience some sort of ecstatic feeling
The drug that personally scares me is cyclobenzaprine
Itās just a muscle relaxant
Not supposed to be addictive
But the feeling of just no soreness and a full night of sleep
I donāt wanna depend on pills to achieve that
Well sounds like you have too much night shifts
That you need meds to get better sleep
Work tonight I just have a condition
I donāt work night
I can sleep super easy. Itās just Iām always tense and sore even in the middle of the night.
Not that I recall tbh
FR4 is more balanced sounding to me
like in the middle of what the kids call "thock" and "clack"
I find CF to be closer to Alu without the metallic resonance
I also feel like FR4 has a bit of pop to it
This shit sounds so loud for FR4 lmao
Those are Fluxes?
i literally just bought my wooting, what are some good cases for it, i dont really like the black look
I do kind of fuck with it tho
It's a loud switch. Maybe the loudest available. If you want to tone it down it'll take more than FR4. You could try tape modding but not sure if it'll change the sound profile enough.
Tape mod made CF more in line with FR4 before I cut my silicone, but I do fuck with the volume of it, just unexpected for FR4 hehe
Fr4 so quirky and whacky
One of my fav plates TBH. If I am feeling more clacky I go FR4 otherwise it's PP as that's generally my mood lately.
TTC POM better
Too light
I just noticed they were designed by Hipyo lol
Was showing them cause they match that case you have
i almost typed "those have a nice color" until I saw that comment mr cam
thank you for saving me
are the v2 new ?
very ewwwww
Not light enough
Thanks man but I ended up ordering 2 kits from osume yesterday that I think will match. Let me get the links
@harsh dove https://osume.com/products/cafe-rose-keycaps and https://osume.com/products/dalgona-keycaps
café rose inspired keycap set inspired by the inviting atmosphere of a korean coffee shop, café captures the warmth and simplicity of a peaceful afternoon spent at your favourite local spot.  click here if you're looking to pair this base kit with additional café accents.
is osume us site?
Also grabbed these for another potential build - https://osume.com/products/little-ghost-keycaps
They are based in Canada but are opening a US location too
interesting, was just wondering if they have blackfriday sell
I've always loved their designs and color choices but never owned any of their stuff. I plan to try their keyboard display stands one day
i think their stuff a bit expensive at their original price. but i kinda want to try their font

The price is mainly why I haven't tried anything but they had a sale yesterday and I managed to get a price mistake I think.
Didn't get the artisan in the end
yee i just saw, having a spring sell rn. honestly 70+ still rough for pbt to me. but their really do have like gud color options and interesting font
if for some magically reason you can remember, can you @ me when you post pic for their keycaps?
Will do. Not sure when they will arrive, haven't received a shipping notification yet.
https://www.bilibili.com/video/BV1fD5ezjEC8 wooting on bilibili now
getting hella hate in the comments 
Can you screenshot and translate
I dont wanna give china more info
Comments aren't that bad. Always a few trolls but I've seen worse in YouTube video comments or reddit.
Reddit is worse
Way worse haha
Ah the old 0.01 RT argument
hell yeah brother cream it up
Nah I was half joking
Ah very nice, yeah I was looking at Dalgona recently
But I do need to try pp/pom plates
Arenāt these the caps he said took him like a year to make
The phases are maxxing!
MarbleFather!!!!
I wanna try Fluxes on POM, I liked POM in the 80HE tbh
Not sure, I don't follow him like that
@harsh dove are you getting holy80?
It's a cool looking case but the sound goes out the window with all those holes
Yeah if I didn't care about sound, I'd maybe get one
Ngl I used to watch some his vids like a year or 2 ago
I just remembered he made a vid abt those caps
Itās nice to know weirdos that obsess over unusable settings are plentiful in China as well
But I guess that does make sense when they invented the literal charts for the unusable settings
same
They invented the Placebo Maxxing Charts
For the Duhuk Herz HE, does it matter if I select 700gs or 900gs?
man i wish wooting sold a version of the optimum keycaps with the letters on it lol
i cant find any other keycap with similar colors like that
If u have a high budget/can have abs keycaps maybe look at gmk modern materials concrete base
those look nice but not my taste - something of a darker shade would be better
i reallllly wish these were still in stock
These?
You can search up grey gradient key caps @tardy obsidian
You might like those ĀÆ_(ć)_/ĀÆ
Yeah I knew the gmk ones were a lil lighter
Have u tried ur copper weight yet
Wait nvm Iām a brick
Do u snuggle with it
Youre a brick 
Yes 
Iām assuming it didnāt change the sound much
Since itās on the outside not inside
Yes
It's heavier doe 
and looks nicer
you have a comparison :3
i never tried cf backplate
sound comparison i meant :3
Theres no difference š
cope
a carbon fiber weight⦠what an interesting concept
CF is on stock Leggera
im gonna pretend like ik what this is as i havent looked in this channel in over 4 months
and im afraid to spend more on my 60he
The carbon fiber came with the case itself, I bought the copper back weight seperately and I'm now using it cus I like it more

i shall be the first to have gray optimum blanks on a black tofu60 case
(i havent seen any other yet)
I think I've seen it once on wootstation
Ngl
ive been trying to find a pic
and i couldnt so i just ordered it 
black tofu 
You can imagine it yourself kek
tbh thats not bad
both work just fine on the 80HE
just for the older 60HE, 900Gs works better iirc
hey im looking to make my first custom keyboard, definately with rapid trigger, how much can i expect it to cost around?
like whats the range
If you want to build wooting 80he with alu case it will be around 340-350$
80he module 165$
owlab ti he switches 50$
gt80 or zinc alloy case 110-120$
would the 60he+ be better price wise? also im assuming this is usd
60he+ module is 25$ cheaper
yes this is USD
okay i just checked the website, 60he+ is a lot higher cause of the case price
if you want 60% you can build venom, its cheaper than wooting but doesnt come with warranty
and has a bit worse software
fully built venom is cheaper than wooting
thank you! ill take a look at it
the 80he build doesnt seem too bad either, might be able to work around that as well
venom is only pcb, youll need to buy case, plate, switches, stabilizers, keycaps separately
if you can spend 350$ then build 80he with gt80/zinc case with owlab ti he switches
you will like it
yea wooting is expensive because you pay for 4 years warranty and product support
bruh the ur ice ultra out of stock everywhere?
i put a order on them april 15th snd the still havnt shipped i sent them a msg and they said out of stock we dont know when they will be restocked-.-
pain
https://a.aliexpress.com/_EwFnuAg
https://a.aliexpress.com/_EvSHUeg
Are these the same just a different color of the switches?
There is a slight difference
In the bottom-out force
I bought from here and they have shipped them now
If you go through the ācoins pageā you can get an additional 30% off on them
@last oar
when did you order them?
Yesterday
I ordered both the pink and the ice but they shipped the ice faster so I cancelled the pink
alright, putting a order on them
Donāt forget the coinsss
did not, are these the same as the ones from krepublic?
Yeye itās the same
Or well, the titles suggests so atleast
The seller has good reviews so I thought why the hell not
Should I also order Duhuk Herz HE? š¤
get owlab ti he
They seem nice, probably will try them after the UR Ice comes
u have them?
No, I dont have them, im recommending them because others tried and theyre very good
Yea, ur ice ultras gonna be a bit deeper
yeah, guess ill just wait until theyāre in stock then
gonna try fluxes in ~2 days 
Hey guys, does anyone know of any gh60 cases that are not the tofu60, holy60, or alumaze?
Leggera T
Gt60, salvation
i did end up ordering the pink ones from krepublic lol
the difference.
should still sound the same as the clears ones right?
that tweet talking about tofu 60/65/tkl, maybe it wont be too difficult to find a case for a venom he pcb then. if those drop soon then i can pretty much do any size i want
Leggera case is heavier then my fatass 80HEš
Ping me pls
is green dragon switches any good?
Just a recolor of Jade gaming
@harsh dove you got any info on the pink ones? clear ones wasnt in stock, to me they look the same? so i put down a order on them. any info would be great
i asked UR cs about that, they said the sakuras are just a recolor but they could be wrong
Im pretty sure the pink ones are basically the same as the ur ice ones
yeah looks like it right? only the bottom force that differs from what i can tell when i read about it
everything else looks the same to me
If you use the pink one you will have a more feminine touch when gaming
š„
looks like i have to wait for the clear ones to get restocked...
Nothing wrong with a feminine touch!
Pink is a very cool color
ofc not just that i prefer masculine!
yeah i think they look great tbh
those switches atleast
If you want masculine get these https://unikeyboards.com/products/duhuk-lumia-herz-he-magnetic-switch-10pcs
The Duhuk Herz HE Magnetic switch is more of a budget HE option among the Grain Gold HE switch lineup.  1 quantity = 10 switches Switch Type: Linear Designer: Duhuk Lumia Manufacturer: Grain Gold (Same as OWLab Ti HE Switch) Stem material: POM Top Housing: PC Bottom Housing: PA66 RT: 0.01 Initial Magnetic Flux: 140±
already ordered the pink ul ice
But these have milky pink tops
UR Ice Sakuras have clear pink tops
Milky is always better
bad photo it wasnt taken with sony 16mm f1.8
that's true, unfortunately sony korea is out of stock of 16mm f1.8 for now and i have to wait for more stock
Fire pic
guess the wooting community needs to come together for us to all have some high quality lenses
Literally. It can burn wallet
see this is why I try to help shafie every day by moving his tiktok algo to lens reviews
Tell me you like lube pooling up on the bottom of your PCB
I do like the idea of this though. Direct PCB magnet for the placebo maxxers
POM
DAMN
now this is extreme open bottom
- See Wooting Modding discord channel for information on which switch meta is currently being pushed that day
Now you just need to release a bottomless switch and make it even better
nah, just make the magnet static and just move the housing
Saw that holy80 tweet but not really my thing with all those holes in it
How it looks?
Any pics?
Was just a single Pic I'll see if I can find it
Second one, not rly my thing
What does full travel mean for stabs?
mmm, tofu tkl, hopefully they can bundle it with venom TKL
It's not less than full travel
Thatās wild
I love it and hate it at the same time lol
No stupid plastic interfering with you magnetic signals. Ultimate maximum performance
Oh no youāre too far gone š„
Blink twice if youāre in danger
The best version of this type of switch (kb-37) is the Fuji dual rail or magnetic fox switch. I also don't see it fitting on anything besides those type of pcb's unless you got a keyboard that just has holes in them
did you mean to send "I am the danger" lol
Russian American TV expert very nais 
no
lol I mean breaking bad is mega popular everywhere
alr dad
š
Wtf is this, this should be marked as nsfw
Is it a centerpiece switch?
That moment when Shafie is a couple years younger than you š¤£
alr lil bro
how old are you dad
had to double check
alr unc
almost a decade older than me
smol
Miao type shii
waow
I cope by the fact that I still get asked for id all the timeš
š„
smol
alr lil bro
Funny I still pass for how I looked in 2019 š¤£
im the same too
Probably not great for you then š³
just add extra 60lb
Nick bosa maxing nice
jk
alr kawhi
Damn. Dad just be going crazy
Foams or no foams(except pcb)
Polyfill only in this house
Alright kiddo, time to go back on the little slide 
New meta is tshirts
okay unc
In this video, I modded my $300 custom keyboard with some interesting mods... hehe :3
The mods used are:
PE foam mod, Tape mod, and T-shirt?
Keyboard Parts:
KBDFans Tofu60 Case (Black Aluminum)
Durock V2 Stabilizer Kit 6.25u - Smokey
KBDFans DZ60-ANSI RGB Hot-Swap PCB
Gateron Milky Yellow
KBDFans 60% Plate - Aluminum/Brass
Follow me? :3
https...
š³
Yes sir! Just waiting on some keycaps to match it better but it's done @calm pulsar
Tf
The caps I tried didn't quite a scratch the itch
ah I think you posted some light brown/white ones, are those for this build?
Why is there a T-shirt in the thumbnail lol
T shirt mod. Polyfill is out
Samurai ftw
Interesting lol
yeah none of those hit for me personally
samurai is the closest but the way alphas are different from the case scratches my brain
in a bad way
Feel like PBTFans Emma could look good on there
My favorite is pbt fans lucy
I remember how you changed from emma to a gmk set and it sounded so much better on poms or some switch you were streaming
wooting poms I think
Fuck dem OG Poms š„
Yeah GMK just better
Their ABS is unmatched
abs maxxing
yeah couldn't be caught fking with such a wobbly switch
Thatās why dad went out for cigarettes still donāt have fluxes
I mentioned this a lot but I think it's cause pbtfans do 2 layers of plastic instead of just having the main shell be part of the stem like on gmk
so the 2 layers give a dampened kinda sound, which may or may not work in different builds
Yeah I (us) wasnt a fan of them on that frog mini build on stream
Wooting Mods Switch Guide resource is done: https://wootingmods.com/switchguide/ - a lot more things I need to tweak on switch list and switch info + have to get homepage setup properly, but workable version is ready at least
I 100% don't have every one of the switch recolors and such listed either because there's a billion of them, but should have most of them. I think I need to add some of the everglide new stuff in particular
Let me know if anyone knows any stores needed to be added to the 'where to buy' section. I added particularly the stores that sell HE stuff and left out the ones that didn't, but might have missed some
if i want to buy the ttc pom magneto and swap out for a heavier springs. Will the wooting springs be fine or should i get it from somewhere else
you want even heavier than the ones from wootings ttc poms?
or you have existing og poms?
i do not but i like the red and white combo
but i know wooting has heavier springs
35g on the og and 50g wooting iirc
Prob should add UK. KeyGem for EU has some magnetic options as well, so would add that under EU.
oh sorry i read that wrong that i just want 50g
i'm not sure if 50g for that type of spring is available unless there's something on aliexpress
The Wooting springs have a different diameter than KoMsā, they work but you might experience some sound inconsistencies.
I wouldnāt recommend it.
you're kind of stuck between the two in that ttc pom og is 45g and ttc wooting pom is 55g
if you want closer to traditional switches like mx cherry then go with wootings
if you want lighter feel then go non wooting ttc pom
Could go with a different switch entirely that is compatible with 3rd party springs.
okay ty i guess i'll go wooting i hate lighter feeling
Wootās KoMs are already close to 50g tho
Oh i remember keygem. I was going to add them then i checked what magnetic switches they had for sale and it was only one switch lol
i have geon raws 40g right now and i hate how light they are
i think iirc they only had jade pro and that was it so I didn't add them lol
might buy 50g springs and swap it out or just buy a fresh batch of 50g geon raws with ttc pom
They had two options before. Still good though as you canāt get them anywhere else except for ali
thank you guys for your advice
max gaming sells jade pro now i think
Just Black Knights now
For the UK, I think it was mechmods that had some magnetic options
what switches were you thinking of? Im just curious
i seen people in here hype up duhuks (sorry if i misspelled it )
Nope. If they did, not anymore.
Any really. Most are compatible with 3rd party springs.
Duhuks have a quiet top out
The Herz ones would be a bit closer to Raw HEs
Could go with something like the Ice Ultras
Very minimal wobble on all of them.
hype for a week
sorry 5 days
guhuksš„
raeds better
raeds clear
Rawhuks best switch but yall are not ready for that conversation
flux bestestest
imoshi š„°
Outemu pinkš
Is peak
nuh uh
Price Is OP Donāt care about anything elseāas long as it works.
what price
water costs more bro š„
If you buy directly from the factory, itās a dollar per 50 pieces, but thatās wholesale.
Are you ai?
bro i did 3 of them all wrong
am i braindead or is this thing broken
If you are not ai so you are just que pro
to be specific 
Unciba getting fooled by captcha damn
Fr????
That's crazy if that's true
tf am i supposed to put there
Yea

what if that's an X
Stock 80he if i remember correctly is about only 600gram
Would be funny if they wanted you to do 21x2
PCR?
Ye
wait
Wotafak
nope
nope
i am lost
i dont wanna call msi just to check when they gonna send me a replacement
Mine was ā600 for sure maybe more because currently with cerakeys sheās 1kilo
no, yours was 800 too
Because the B-set keycaps weigh 330 grams.
Am i stupid asf
stock pcr 80he is 790g
By the way, I forgot to show off the result of my experiments with the Soaptech G102.
A perforated bottom, Removed almost all the unnecessary plastic. Also tried to lube wheel encoder and switches
As result I cut two fingers, Got a burn on another one too.āall for minus ||2 damn ||grams.
Screw your custom mice, Iāll just buy a wl x pro and enjoy life.
based asf
beastx supremacy
Guess my leggera has become moderare
Frog Mini Moderare 
Or this one ulx

But Itās only available used, and I donāt want to order from another country.
Ayo shill guys

but muh CaRbOn CoMpOsItE
carbon composite with horseshit quality
95% plastic š
Gotta make sure it flexy like dem keyboards 
Damn, I was just about to get my other 80HE back from my fiance because she needed to have a full size board. So I got her a keychron full size and now she is mad that it's too loud lol
Flex maxxing
LMAO
Get her a numpad 
About to swap her alphas and mods with something quieter
80he+seperate numpad
I wanted the 80HE back lol
Oh HAHA
Nvm then
I'll be taking that yoink

Whatcha picking
Iām just too lazy to get the blue wl, if only it were anodized or if the surface hardening wasnāt limited edition.
im making an overkill setup. whats the literal best mouse on the market bro?
theres no best
in ur opinion?
Yeah shits preference like everything elss
I bet some people still prefer g502 or some shizz over anything 
wlmouse cooks, pulsar has great stuff especially if you like ftip, gwolves too but shit qc
is sora v2 still good?
op18k
i have viper v3 pro and beastx pro, both are great. I prefer beastx pro because of the shape and different material (magnesium)
vv3p is good
beastx supremacy
Ofk depends on your budget
lamzu makes great mice
I heard vxe r1 is cheap and good
ye no budget @marsh saffron
First v of sora
The second one is crap
people use those chinese knockoff vxe atk, but im not touching anything from that company
Bbbut tech tttokers sssays itās ggoodā¦
š
98% of tech tokers are kids who get sent absolutely everything and praise it all.
Theyāre afraid of losing sponsorship deals from, honestly, pretty weak companies.
I'am in discord where people are shilling them
leave
Trying convert them to wooting
but muh mad60
Their only argument is wooting is overpriced
This is why optimum is my goat
Fuck them all(for fun)
Iāve already gotten two people into Wootingāone is saving up, the otherās about to buy.
Hehe, server idea: give roles based on how many people bought a Wooting because of you.
@sacred elm tbh redditors are easier to convert
āWooting Advertising teamā

WW team
WAT
Thats epomaker behavior
Just had a chance to read thru the site, very well done, and I appreciate you using my photo lol
Fr
@glacial wind why you didnt recommend raeds for thock maxxers.
āWooting Preacherā
I was going to ask about Raeds under the silent section
But I know he said he wasnāt done with the site and will update it more obviously
Iām even a little jealous I couldnāt take part in it. Gotta tighten up and try to help out.
should add camās sound test with it as well. so people know itās original thock, rather than tiktok thock/marble/creamy/whatever the fuck
theyre shit?
Reads aren't thocky under any definition. They are muted but not silent
Balancing wires on stabs, different plates
Because literally nobody knows how to do this on tiktok
people know thock from those videos and nobody cares how exactly thock sounded in 1838 BC
Raeds are the original thock. Basically exactly that. Since then the meaning of thock has gotten a bit lost but many that are into mech specifically still go by the original meaning it seems.
kinda yeah but that goes for pretty much all the terms haha
on yt
Few if any in this channel right now have been involved in the hobby as long as I have and no matter how far back I go, I'd never describe Raeds as thocky.
no, there are just other alternatives without weird muted top out sound
It didnāt originate from Topre?
Iām pretty sure itās accurate that it did
from other people and YT
not from being active in the hobby back then haha
Oh it did but the Raeds dont sound or feel like topre, despite the goal
Yeah they arenāt exactly silent
Have you typed on Raeds and on a real topre switch?
to match topre
They still have a sound to them
On Reads yeah, real topre a long time ago
canāt compare them myself, just going off of what Iāve found so far
Maybe the new version will be closer, but the reds I have now aren't close.
I think itās close enough to be able to fall under the same term. Raeds seem to have the same thuddyness as some topre switches
most even

There is a range of course but from the Topre videos on YT, itās in the same ballpark.
Iād say the range is smaller than that of clack š
mmmh i see
Lowk, in my personal opinion and preference, I think duhuk bottom out sound is the best for me 
what does it sound like?
Although I don't like the top out, bottom out just smacks 
Sharp and loud
Def made for clack enjoyers
Like POM, flux, and what not clacks sure,theyre loud and high pitched, but to me they sound a bit plasticky of some sort.
Not saying they're bad at all no, I still like em, but just smth abt nylon+fiberglass hits 
does anyone have a video of doing a sound test with them?
Hey Guys, I tried LekkersV1, LekkersV2 and then Wooting TTC POMs, the latest are way better in wooble and sound, but are too stiff for me, which switches are you recommending now?
All of my recordings are in my PC š
all good
A few steps and a push of a button is all it takes
ttc poms have the best stem stability but you need to lube them
I'm eating my brunch rn lol
im in no rush

But I do not thing that will change the typing experience making it softer, or did it for you?
Could always try the Owlab TI's. Very good for the money
just changes it how it sounds
i would recommend looking of videos of each switch youre interested in and then choose what you like
Thanks Father, any recommended store I can buy them in the US?
i dont own ttc poms yet (but i willlll)
when you see the fedex truck drive past your house but you're expecting a package today
I checked the specs, and looked fine in paper, but sadly for me I could not get used to the feel, I was playing Ender Magnolia and it was fatiguing
It's coming UPS
Soo shiny iām crying
i appreciate you friend
@tulip rapids





