#đ§âkeyboard_modding
1 messages ¡ Page 566 of 1
just switched from the silent tactile MX to my POM frog build and it feels so good, but kinda loud
@harsh dove you got any ideas on how to make POMs quieter in the frog? without adding plate foam
I didn't realize Wooting were selling the Geon Raws on the website now, and instead ordered from Geon themselves, just cost a bit more so not the end of the world. But did I mess up? Should be the same or.. maybe even better right?
the same
good to hear
Instead of having the option of 40/50/60g RAWs you get default 50, but you can always spring swap for cheap for w/e reason if you want 42.5g or 62.5g springs
I think you misunderstood what I said, but either way I did order the 50
he just meant that from Wooting you can only order 50g weight, but on Geon all 3 options are available
in any case, the switches are the same
What did I miss Josh 
Maybe it was a joke?
@kind helm
I have og Poms now so clearly I was wrong, forget the issue
pom springs better
If that space is 500mm deep idk
Good to hear
Iâm bout to oil tf out of them too
(One day)
"bout to" đ
Nah ima just forget abt the mousepad
But I need yall opinion on smth
Which would match better with my desk
Like the case and keycaps
I feel like black but idk if the keycaps will match but I rlly love the keycaps
In fact I just ordered another 70 OG poms from milk tooth
Probably white case
But doesnât my desk have too much white
The big mousepad is black
Iâd probably go white case with WoB keycaps
But Iâm a hella minimalist idk
Just a thought
Whatâs the difference between andonized white and e coating white
Same
They look the same but prob look different in person
make sure u order the brass weight with it
it will sound like shit without it
didn't miss anything, josh yapping again is all, crazy, i know
hehe
I think we are all guilty of that at some point
My new meds are helping
Some ppl gotta pay extra for that Prololsucc smh
The doc said thats the brand name, below is the name of the medication
âWhat do you think Iâm a retard doc?â
âYes, yes you areâ
Bruh I got without it people told me it just adds weight
Low key thought that was photoshopped but I guess not đ
"jade retardtablette"đ
Yo chat is it rlly going sound shit without the brass weight
what case?
tofu then yes
or i should say the other way around, with brass weight its gonna sound better
Tofu redux 60
Omg thatâs an extra 37 ggs
actually, lets not say better, weight helps to reduce hollowness and lower the pitch of the board.
if you gonna stuff a bunch of foam in there weight may not matter as much
my lx60 project might still be doable with this little extender
shortest I could find is 5cm though, I hope I can place it inside somehow
Ima do anything and everything to make it as silent and creamy as possible
Yk what a creamy keyboard sounds like right?
Perfect
I hope they are not going to send this short where the switch has "cream" in the name and thus it is a creamy soundđ
Just search creamy keyboard on TikTok should be just the first vid
Wait I can send TikTokâs in this bih
why just the first vid tho? like itâs bc itâs the first vid thatâs the definitive creamy sound?
itâs just a buzz word, itâs subjective
Ye
Bro ima send a TikTok how yall not know what creamy is
I had an entire 2 hour talk tryna explain creamy
imagine building a board based on a video that might be edited and also not even an HE board
how do i facepalm in discord
Pretty much

đ¤Śââď¸
đ¤Śââď¸
Aura
#đ§âkeyboard_modding message is this thock to you?
probably not the thockiest but thock enough for HE
Thatâs like half cream

Watch this chat
This is better vid trust
Alr I officially spent 140 dollars on aliexpress I thought it was a scam website ngl
- not an HE board
- barely typing
- bro she has reverb effects in some other videosđ
Watch the boy
Iâm saying how I want it to sound
Cream
old build i had :3
Get it back
Also yall know some keyboard modding people to watch I hate hipyo te ch with a passion
The guy said put a lot foam so how much is too much gang
switch and click discord is pretty chill
Before I use to use 9 layers of tape
all i can say is usually the good ones have only a few k subs
So do yk any
https://www.youtube.com/@arcwyn my favorite youtuber
he's washed
this my current board but iâm already bored of the sound
Donât recommend that girl that collabs with hipyo too
switch and click
Kinda sounds like my wootang
Ye
She grosses me out ngl
So chat yall know some keyboard modding people
Who is that
my second favorite youtuber
Is badsead tech good
But he got 2 vids
Better than hipyo tech
Also new venom firmware looks cool
For those who have em
i didn't even realize
thank you sir

@fluid ravine time to update. and have you swap to geon spring yet? 
i donât like the PC case look tbh
Sorry not yet
Just finish volleyball practice
Omw home now
yeah @kind helm not everyone is sitting on their ass at home 24/7 (I do)
SORRY!

thats u
Yur
before he became bald 
post more

Do you have a vid about modding a wooting
Once I get frog mini leggera
I can provide you information on how to mod it
But first you should check #đŞâmodding_faq
yes do yk how to make my keyboard really thocky or creamy
alr did
Btw which case would be more tuff with the keycaps I have
Foam to change sound profile pitches and frequencies. Tape mod to accentuate more of the lows and mids. I would go for long pole/shorter travel distance switches.
@rare kraken
What key caps?
the gary wob bow'
Are the switches I bought good for thock or creamy btw I bought a weight bar bc people said it will sound like shit without it
Fyi no switches can provide or give immediate of whatever sound profile you want, your configurations of the whole board itself will result to whatever it shows.
And no k wouldn't go with silent switches for your type of preference
aw dang all good i might just make a silent keyboard then is it the same steps as a thock or creamy keyboard?
There really isn't any like "steps" but you could just do some trial and errors and if you have the time just mix it up yknow?
I have some old recordings of my wooting back from at least a year ago
If you wanna take a look
I listed all of my configs and I think you would be interested
Ye
I have a few more threads but this is just one of them
That I could find
I love how the first one sounds ngl
Duhuk support before TTC POM is wild.
who the fck buys pom anyway
Yo why couldnât I find this?!??
maybe beta only still, @calm pulsar do you know?
Oh and btw what case do you think matches the keycaps the best?
@polar girder time to update bb
Duhuk just better
Thanks
Can you screen shot the keycals
Geon knows wassup
Ok Mr. Popular
so bald yet so popular awww

DWAYNE DA ROCK JONSONN
Iâm still torn if Iâm going to use that for forsaken UV caps lock shine through on Cosmos or not
I really donât like how it sticks out like a sore thumb
Tofu redux right?
So poorly lit.
maybe you can give it some extra use so the legend goes away 

Truuu
ooh it also has a darker window
I like it to be dark
Same
Anodized grey, meteorite, black I'd say
Alr ty
Np
Ima go shower now
I need fooood
And ima spring swap whatever I can tonight
Good boy
geon pushes out support for switches he sells locally first, so i think until ttc make a cheaper switch he might not add it to his switch selector
jade max and duhuk been in his store for awhile so that's why he adds support for them first
he added jade max in the same update though
max been for sale for long time now in kr store
true, it's just youmentioned ttc making a cheaper switch but he put maxes on the store for some reason 
Todayâs build on the tigerlite gaming:
Geon Raw HE 50g on FR4 plate
Knight stabilizers V3
No foams no film sheet
GMK NTD
Let me know what you think!
My favorite HE build
max is cheaper than ttc
but I also remember geon mentioning he likes transparent switches, so ig thats why
whats EC switch?
conductive?
electro capacitive
i think korea also doesn't really stock ttc switches much in general
uses the springs for analog signal
i think swagkeys is the main seller for ttc in korea and even they only stock a small handful of their switches

could you not swear? my mom reads my phone
he doesn't give a fuck bro his papa is a mod here
damn gmk botanical desert is so good
i just got 0 - 4 in r6 bro
What is new stable one ?
new stable firmware version, you can see it on the software website
Is ok bruh
I got 0-6 for kd
Im not even at my peak
gmk cosmos foam
wait so i just switched back to my salv, i noticed this. so basically the original beta v60 version just became stable v60
make sense in a way but kinda interesting hehe
Maybe your Duhuks wonât have that issue anymore
oh yea i already updated my duhuk board before this. salv has raws and tofu 2.0 has duhuk for me
i even redo the calibration thingy again because the log mentioned that they tweaked the method. so i was curious maybe this would be better
it's over venom bros, no new firmware
How do I fix a slanted space bar? 60HE+
what you think
they're much better than the ali's but i still have mix feelings
a bit sluggish?
nah nah
spacebar kinda weak I feel like
i think it has to do with what pochizo said, it got that funky top out to it
yeah that too
ah yea, i thought it was mainly alu exposing that tbh
i haven't tried with other plates
another thing i notice is this
i know the mic distance is diff in these two recordings
but both recordings is the same
build config
first is duhuk stock
second is lubed
i think the lubed duhuk is really dampened on the bottom out
i feel
assuming it has to do with the bottom housing being lubed
did you redo the lube or just lubed the spring though?
ty for audio
every switch is lubed
like fully
top to bottom
like the bottom out is less sharp which was a ear catcher after typing on it for a bit
yeah that is pretty sharp
maybe affected by isolated bottom out sound
sounds like alu plate is doing most of it tho
I think stock sounds better personally
cant hear the difference
i think so too
but if they're freshly lubed, it'll break in like my POMs did
I didn't like the sound of my freshly lubed POMs either
so you see..
my duhuks are already broken in ;-;
might be lol
im like debatin on what to do next
cus stock duhuks were nice for me
except the springs
i really liked the sharpness of them stock without the lube being spread
https://www.bilibili.com/video/BV1m3RcYdE45/ do you hear the same issue here 
spacebar at 0:25
ok yeah the top out is shit, sorry, but the bottom out is still sharp
moutning can be a factor yes
no yea that is why i want to try a softer plate with duhuk
i hate my ears sometimes
i havent lubed my dahuk yet how do i avoid this problem
lube springs only?
dont touch stem?
like there are times where i just wish everything would sound the "same" to the point where i can't hear the minor difference to nit pick at
but damn it's too late brah
i can hear EVERYTHING
that is what i did at least, i haven't bother to deal with the scratchy top out since it is pretty muted :3
tbh i was assuming that this bald boi would be messing around with it then i just copy later
give me time
im starting to think that the lube on the bottom housing is the problem rn for me
time to get venom and make a second cardboard
whats the rest of your build
i just switched the unlube bottom housing to A and just hear side by side switching in and out
Fun fact i have mine tape modded
im hearing the difference
and i got a venom rn
i might take the time tomorrow to mess around with the lube
maybe even try unlubed duhuks 
0 LUBE

unlubed dahuks are fine its just the spring
nah unlubed
its tolerable
no fucking lube at all
like wiping off factory lube
LOL
i wanna see what it's like tmr
đ
what you trying to achieve?
What keeb case is that
did bro fart in the beginning of his recording?
Yep
someone ripped ass
Thats hella clean
Frog Mini
frog better
True tbh
you guys think if i buy a gt80 id get it before cam now? 
@kind helm ^
Might be the alu plate tbh
I find alu plate hard to sound right with HE
but might just be me
Somehow someway the fucking Tape mod for the optimum
actually fixed my esc key ping as well as my space bar and my delete key
raw
But the enter key is chattery AF
Probably
raws good
RAWR
geon rawr he
im thinking of changing it out with Jades
jade pro to me is kinda boring
damn, thats sad they slacking on your order 
not with tape mod
Lol nah it's shipped
should be here next week
I used painters tape that shit actually is fire af but dont use 3 layers of it when using optimum

It'll look like a 3D ass dimension
fck copium oring mount and tray mount case
never touching that again especially when geon blessed us with venom
im blessed with 2 things
1 tape mod 2 a typleus YIKB stabilizer
true one
yes, copium oring mount aka friction mount is... meh
3 a limited edition optimum case that is not limited edition
as of now
Which is a good thing
sandwich silicone is just copium on copium, way too powerful for lowly me
đ how much did you pay for lx60 btw, @calm pulsar
140 + shipping
W
fr4 plate too i think for extra 10-15
i am browsing through some random keybort vid online and saw some mentioning that lx60 price dropped a bit after neo60cu came out
look hella good 
I'm jus talkin smack
time to get cherry blacks to match with the black theme mr arc hehe
Well yeah, that has a "keyframe" sort of piece so it doesn't hide the keycaps like that
basically exposes it more
OR I keep my geon hmx hehe
but I do want to try genuine cherry some time
w8 this is tape modded?
how does it sound like this when tape modded
thats impressive
i heard that some people hate that because it messes with how the board sound apparently.
:3 never happened to me so idk
Hmm interesting
Yeah Protagonist has something like that but it's a whole separate piece
sniff sniff
Approved 
Lol I'm jus joking bro
Really now 
are there any boards that are top mounted but the entire top is on a gasket
Im gonna record my duhuk sound test today
i guess geon tadpoles are kinda like that?
entire tadpole goes through the top of the case
But i realised i need to trim my nails before i do that cause otherwise they will hit against the keys and make it sound different 
I also dont know how useful itll be of a sound test since i dont always bottom out
OMG AM I DREAMING
IT'S ABOUT TO COME TRUEEE
@calm pulsar
LEGGERA BEFORE GTA 6???

Cheaper than gta 6 too
Also what does the announcement say
I am not in geons discord
And is the new calibration mrthod better did u test ?
what if the color baldson wants sells out before he can get it
and with geon international restock times he has to wait 1 year
is that how he starts his villain arc
$0.22 per switch
lesss gooo
Damn kbdfans rly made a gt60 faster than the holy80, i guess the design is easier to adapt
That sounds hollow
mfw no foams đ
does anyone have a venom 60he cuz i have some questions
iâm in the geon discord too but would like other opinions
is it just me or do i hear clicking on the duhuk upstroke
I have one but not used it much
But there is plenty of other venom owners here
the best amount of foam
have you experienced any issues?
idk iâm just worrying now that mines almost here
iâm also curious what i need to do to get it into a tofu60 redux
cuz it says you need to remove the daughterboard above the arrow keys?
Silicone washers đĽ°đĽ°đ¤ŞđĽ°
Bro why is everyone telling me I should have gotten smth called the mad60HE bc itâs 60 and is the same as wooting
Mad is popular because of itâs price tag and its somewhat good performance.
The overall package is nowhere near any high end boards though.
Just the price to performance ratio is really good.
Same with all those OEM boards now.
Win60
and Aula or something
Nah but I would have gotten no support with the mad60 plus wooting updates the keyboard or smth I forgot what it is
Asss
U dont
Thats only if ur using center udb
Ur not
So you dont
Not really
center udb?
Center daughterboard
ohhhhh
Finally got around to start lubing the TTC KOM switches, they feel much better after some brushing.
madlions doing strap gacha 10rmb a pop
Ah yes, innovation
maybe we should do keyboard gacha
Okay
100eur and you can get an uwu non-rgb or uwu rgb
UwU claw machine
thatd be a cool headquarters thing if we had an hq
visitors can use a claw machine once to try and get a free uwu
or a wootup thing
Then that one sweaty claw-machine gamer comes in and yoinks all the UwUs
thats why i said once
Lmao
glazing đ
obsidian is nice
amber and jade too
azure too
floral and ivory as well
blossom looks disgusting
Oh no why did you show me this

Not even up at 4:44 am for restock Baldson not locked in
@fluid ravine
Get out of class not a fire drill this the real type shii
o shit
Get in here baldie!
Dude is about to stand up in the middle of a midterm exam and sprint out of the lecture hall to order keyboard parts
He didnât order when he woke up, he not locked in 
jade pros>>>
duhuk>>>
Very noice
i dont own anyother keeb that why asking...cuz i feel spacebar sound of 80he kinda broken like...can i fix it?
you can do a lot to change spacebar sound
spacebar foam, different stabs, different switch under spacebar
𼚠can you suggest which give more better result
depends what you are looking for
also a number of keyboard mods will also impact the sound of your spacebar
idk but i dont want that kinda broken like sound
rattle kinda likda not clear sound freq
sound freq feel like unclear
more disorted like...idk how i can explain it
just take a video of it and i can see
ig you can feel i want to express you...
I was so close when I said march 17
@calm pulsar @harsh dove u gonna get the leggera ?
TTC KOM >>>>>>>
@surreal edge you're referring to stabilizer rattle and it's especially noticeable on 80HE, be it because everything else sounds pretty good out of the box, or for whatever other reason. But yes, all prebuilt keyboards exhibit stabilizer rattle to some extent
Like 72 hours off bro. Idk
Jk yeah that was a killer guess. Well done.
good news is you can fix it in 10 minutes with some lubricant and a screwdriver
there's stabs also on the shift keys and backspace, enter, but those are not always so bad I guess because the key is smaller (?)
in any case wooting "sells the solution" in the form of a lube kit on the store, or you can just buy dielectric grease or pretty much any kind of lithium grease you have around will work more or less the same
you put a little bit of that around the contact points of the metal wire and stab stem/housing and it starts sounding more like any other key
so how to fix stabs....
?
I told you here
i need fully open pcb or just lift spacebar and
apply lube
usually you'll disassemble and remove the stabilizer entirely
i cant understand what likda lube kinda like oil liquid or like creemy
Just some grease
yes
Like dielectric grease or XHT-BDZ
grease is the opposite of oil if you're talking lubricants
go watch a guide on youtube, there's one even by wooting
any will work? ig my uncle has some as he used for tractor and bikes
Something thick and tacky. But also must be electronics safe and can be stable for months or years.
pretty much any will work yeah
is it diff grece?
@surreal edge
This is what you want to look for
or you can just spend the 10⏠ordering dielectric grease online or even particular stab lube like the one wooting sells or the XHT-BDZ if you want
I'm not convinced it's all that much better, but if you want to take the guesswork out you can buy lube particular to stabs
cuz as ik in my country this kinda electric lube not sold in small size i have buy very big one
GPL107 is an oil, 205 grade 0 is a thinner grease
You want something thicker
oh i have something like that
Electronics safe?
grece but it will cuz any issue in pcb?
even 205g0 works, some people like using that for stabs too
i have to check online
dielectric grece safe for electronics?
but if you have something like lithium grease available, that's fine to use
Yeah, but it needs to be re-applied more often in my experience.
yes dielectric grease is good
Dielectric grease is good yeah, it says it in the name. So it's perfectly fine to use here.
that would work
Should work yeah
yeah that's something I used to use before I got fancy stab-specific grease
just use anything you have around that's similar to these, and if you want to order, order keyboard-specific one
at that point it doesn't make much of a difference in price I don't think, if you're buying something new to begin with
and then you'll have the optimal stuff
Does anyone here know if the Gateron GT60 pcb is compatible with wootings pc switch plate? 
Yeah
Confirmed or what?
i dont think so considering the kbdfans plate includes mounting points needed for the case
Frog leggera dropping tmr night est
Lock in brah đ
4 minutes right after announcement

Not my purchase I donât gotta do shit type shiii
I still got my hair 
What color are you trying to get
Asking for no reason, definitely not to promote the color more and stoke fears of it selling out
Silver
...

I mean green
For botanical
Totally
The frog leggera gods have spoken - silver is the color everyone must buy
Do you ever worry that youâll try to checkout at launch time and the website will crash from traffic and by the time you get to checkout again the silvers are sold out?
green
i'm kinda leaning toward green tbh
Gray looks nice
Do you have a link for these?
gimme a sec
isnt it just this
ah those
for tkl you get A and B, for fullsize, A to C
i didn't test it but basically i have been using it for like a night and it seems to be working normally for me :3
db and cable included

The 30 series gpu buying experience đ¤Ł
Ain't no way they're 7 euros for a set
Oh derp
Lmao
Ooph ya 144 euros, okay 
Still not terrible.
that's too low
They look really cool.
Iâm tempted to buy a legerra ngl
set A is 2913 rmb, set B is 2017 rmb, you need both for at least a TKL, 4930 rmb is around 620 eur
Glorious gpbt keycaps are acually decent for 30 Bugs ngl
Sound is fine Quality good
But also just tired of buying shit lol he said weekly to himself before buying more shit
The new matte cerakey sets go hard
30 bugs is cheap, what bugs did you pay in? đ 𪳠đ?
I could throw the Wooting in a legera but would have to go T I gues
Is it limited edition? Or just a more costly process?
id imagine it takes a lot of manual work
20 Ladybugs and 10 may beetles
Ah I see.
from the marketing: each cap handmade, 30 processes, 16 to 20 layers of lacquer, 2 months turnaround
oh and they recommend a 70g spring for the spacebar
But fr âŹ
i dont know calibration seems off for me on the beta tho
What is the deepest sounding hall effect switch,I want to build my friend a keyboard for his birthday and he rly likes a more deeper muted sound
Dynastes Hercules
Real
The good news is once you finalize what you want the journey becomes a quest for keycaps 
how many people here will order a Leggera G for their wooting only to find out it won't fit
how the fuck am i meant to use the standoffs included with the fr4 plate from toronto keyboard man for the 80he
i use the screws provided right
but then if i try to use the screws on the other side to secure the plate, they arenât long enough
and the video is not helpful at all
standoff onto pcb
yep done
but the screws provided arenât long enough to reach the standoffs through the fr4 plate
@kind helm in the beta when i put the rapid trigger to 0.04 some keys take it and some keys act like it is set to lets say 0.3 or some shit like that but on stable i dont have that issue but when i put some keys on 0.04 on stable i got some random key presses when i press lets say enter or tab but that might be due it is not callibrated fully since i have ttc pom and i selected the raw switch so auto calibration still has to do a little bit of work that is my guess atleast not sure tho
Nah bro wtf I feel like its been a million years since I've seen you wtf đď¸đđď¸
I gotta be trippin
I didn't go nowhere
venom
still not sure if i should go for green or silver leggera
venom mx

honestly i think i will go for silver leggera
cause itll go decently with my gmk mictlan
Excellent
dont wanna spend an absurd amount on keycaps for a bit
Another 100 silver leggera to sell to make baldson nervous

are you trying to allocate all the stock ahead of time
Iâm just helping make his purchase a fun adventure
If heâs stressed and worried about missing out then heâll appreciate his leggera more later
truly a good friend does his best in his time of need
It comes out tmr at 9pm for him
10pm for me
So fun
Unless he isnât able to get it.. đš
đ
Then heâll get the fun and anticipation of waiting for next years batch - they call that delayed joy
how much stock is there anyway
No idea, honestly probably not 100 for each sku lol
what time to orders open
Just have to plant the seed of doubt that Korea has special daylight savings time incoming to really increase the worry tomorrow
Grrrrr

You don't wanna mess with the baldson now
U gonna stay up to order too
interesting. yee idk. for my duhuk board i wanted to use the duhuk profile. and I was thinking that given the v62 is using a new calibration method, it may make more sense to recalibrate so that the old information collected with the old calibration method doesn't cause any sort of weirdness with the new method.
It'll be 9pm for me
baldboi's dream board is finally coming yet a dream switch still doesn't exist
Pomhuk
fr4 sounds way better than the original plate
it sounds so nice omg
i do have this problem though
im not sure what i put in thats causing that
Replug
Unplug board replug board
nah it goes away when i press down on the board
Hmmm
A perfect switch ayy?


Plink is so good
U know what its is the new method is also in beta so maybe when it gets in a syable version it will be better but like i said sole keys acted normal with 0.04mm rt and others acted like they were set at like 0.3 or so even tho they were set to 0.04 and i thibk the stable one rabdom numbers typing might jave been because the ttc poms need little bit more tole callibrating cause i use the geon raw switch in the selector and uts not the same switch oviously like other magnetic fluxes etc but i will test this theory more in the comming days with rt at 0.04mm cause 0.04 is stable with the ttc poms but i will check for random numbers/letters typing or it just had ro take little bit more time to calibrate the ttcs
I had 17 strokes reading this ngl
đđ
?
You know what, the new method is also in beta, so maybe when it gets to a stable version, it will be better. But like I said, some keys acted normal with a 0.04mm RT, while others acted like they were set at around 0.3mm or so, even though they were set to 0.04mm. I think the random numbers and typing issues in the stable version might have been because the TTC POMs need a little more fine-tuning. I used the Geon Raw switch in the selector, and itâs obviously not the same switch as other magnetic fluxes, etc.
Iâll test this theory more in the coming days with RT at 0.04mm since 0.04mm is stable with the TTC POMs. Iâll also check for random numbers or letters typing, or it might just need a bit more time to calibrate the TTCs.
A bit more easy to read. đ
chatgpt of wooting channel here, i just read your version instead lol
Yeah sorry bro i am just typing some dialogues
haha itâs fine man
So with clack out of clack how clacky are we feeling today chat?
Yeah just wanted to let peopke know here what i am experiencing in the new firmwares since i like to test this shit and let people know what i found
Giga chungus deluxe clack maximizing
Based.
GT80 silver CF clack type shii
how do you mean that they acted like they were set to 0.3?
Yeah so lets say wasd are set to 0.04 and w acts like normal so 0.04 reacting when fully pressed and then released but lets say when i press d and start releasing slowly and steady it does not insta deactivate it deactivates like the rt is set to 0.3mm if that makes sense
Sorry @tawdry tree for big dialogue whitout any .,?':;
đ¤Ł
Yeah understandable tho
Dw: Yeah, so letâs say WASD are set to 0.04mm. W acts normally â reacting at 0.04mm when fully pressed and then releasing as expected. But letâs say when I press D and start releasing it slowly and steadily, it doesnât deactivate instantly. Instead, it deactivates like the RT is set to 0.3mm, if that makes sense.
Dyslexia 
LMFAO
Nah just cba
I can make proper sentences with the all the shizzle but cba
Cant be asked
it's like NBA
Central bitch association type shii
I like mine better 
i was able to kinda replicate that if i set everything to 0.1 and 0.04 (where the slow release doesn't deactivate the key), but then i change the downstroke to 0.3 instead it seems to behave more normally.
i think it may just be your finga, 0.04 is a really small distance so maybe you have accidentially pressed down slightly in the process of releasing so it kinda swing within 0.04m range? is that possible, i am not sure.
did you do the same with stable version?
i realistically i dont care about this too much though since i am following geon's recommended settings now hehe

Yes i did same in stable in stable it insta deactivates it is really the rt release that is not normal in the beta (i did not test the reactivate rt)
yea idk, then just stay with stable version
its interesting though, fun info, thank you sir 
i need to go grab some food :3 check back lata
Yeah probably but in stable i will still look out for the random numbers and letters tho i hope that is fixed now
Np i like to limit test stuff like this with new firmwares
Pompom
daily pom check in
Hell yea
someone needs one of these
Would be cool tbh
But gotta save money now i wanna get driver license for motorcycle
And upgrade my terrarium for my snakes
hehe i was just sayin, i dont even know how much that tool costs
that keyboard is a victim
Canon event
Yeah i wanted to get the leggera but since i got my hands on a frog mini i dont think that is worth it anymore
i am really not sure if leggera is good because of the weight tbh. frog mini most likely better plus the tabpole mount is pretty interesting imo
i tried lubing the switches on my own and i found out they do not sound as i wanted, can you remove the lube added in any way?
@fluid ravine was there a geon stream where he worked with leggera or there is nothing yet?
Yeah exactly i was super ineterested in the leggera untill i heard how muchvthe weight was
Dunno tbh
I don't check his streams
duhfuk?!
Mb


Let it break in
𫦠đ
pissed off cat
can you change the color of the carâs eyes?
if so, Iâm buying it
yea i have it disabled rn
ah fuck, the cat came only with pro?
Yea I think it comes with pro version
@fluid ravine https://www.youtube.com/live/llJ8gM34qrM?t=4286 leggera with raw and i think fr4 plate no foam
maybe i should buy one afterall
fck my wallet
what do you mean by that? sorry if i am that ignorant
the longer I watch him type, the more crazy it gets. Not only space bar with index but also moving all the way over to press right shift is insane
Just keep typing on it, the lube will spread more evenly and it will become thinner along the way
Praise the kitty
buy it
if I didnt have frog mini yes
but I have the frog and also lx60 which is also gummy oring mount like leggera
so won't be getting it
but it's a great case
cam buys EVERYTHING
tru
Thatâs why heâs homeless
His house crumbled under the weight of his possessions
did you end up getting one? I just woke up lol
and he probably buy so many things because hes drunk all the time
And now resides to a simple life of stealing pplâs switches
It's tomorrow
But I will
Yeah i have frog mini and salv so i dont think its worth it for me since i want my motorcycle license and bigger terrarium like i said but ur lx60 is mx right or u olanning on putting the venom 60he in ?
Thanks so much for watching! We hope you enjoyed the video! If you would like to support our channel, don't forget to like, comment and subscribe! Love y'all! :)
@stone flax ditch my tofu2.0 for leggera or wait for peasante you think 
Nice i also ordered one previous week i hope it comes soon i am also curious how the import taxes are handled how i have to pay them
I do think the peasante is really interesting cause its way heavier
idk i spent hella money recently and am waiting for reimbursement. normally i wouldve just go for it

free muny
Yeah the peasante is also not out yet
@sacred elm i already asked i think but did u pay for import taxes ?
I dont think I paid anything
"We offer shipping with processing times typically within 3-5 business days. For customers in the US and Canada, we use UPS or DHL, while for European customers, we continue to use YunExpress. Our prices include taxes, and there are usually no additional fees. However, customs processes vary by country, and customs may apply additional charges based on local regulations.
Please note that UPS may charge import fees for processing and handling customs clearance. These fees are set by UPS and are beyond our control. For more details on their fees, we recommend contacting UPS directly. We can also ship via DHL upon request."
Aha i see i got it fromyunexpress whatever the fuck that is well i guess i will see a mail if i have to pay extra shit i huess but ty for the info tho
you might send them email and ask if you have to pay
I will just wait and look at tracking every day i think if i have to pay the will send me a mail or something
As long as ttacking keeps upd1ting nothing to worry about
lol this sketch is more cringy than I remember itđ @tropic urchin
@sacred elm ok i sended a mail to wlmouse support with the question if they know how yunexpress handles extra costs and if they know that i have to pay extra costs or not
Iâll have to take a look when I get home, Iâm excited now
I thought you put a skull emoji after watching it 
Isnât peasant much heavier?
Iâm more of an endgame enjoyer rather than perpetual upgrade enjoyer
Ok, so I got an answer from gateron on the GT60 plate, they say it's fully compatible with wootings pc plate
"Hi there,
You recently inquired about swapping the plate for the GT60 - it is absolutely possible to swap the plate.
Simply place an order for the Wooting 60 modding kit plate only, it's fully compatible with the GT60. We offer FR4, POM, and Carbon fibre plates."
Thatâs nice. Woot mightâve made a standard. đ
Nah I canât play that shit at work đđ¤Ł
Skull of anticipation
best pbt bow keycaps no budget
same, but from geon's stream it kinda shows that leggera is not really hollow sounding despite the lower weight. if he really did some voodoo magic with the structure of that case, it would be a fun case to have :3
do you know whats the best modding kit for 1. thocky sound 2. clacky sound?
https://torontokeyboardman.ca/products/wooting-80he-modding-kit
The most powerful modding kit for Wooting 80 HE Exclusively designed for the Wooting. Now revamped for the 80% layout. Modding kit only, keyboard not included. Not compatible with other keyboards. Feel Free to contact us if you are not sure how to install:) Why mod your Wooting? Sound profile: fine tune your auditory e
a good one or nah 
I have no clue how standoff points affect sound tbh, so not sure.
I mean it's just 6.25u layout, that's why it fits
Plate standoffs have to align.
aligner knows alignment hehe
true fair
also other pcbs sold on kbdfans fit their wooting plates too
anyone know best pbt bow keycaps with no budget at all
@harsh dove you have a surprise in the mail today
Did you send him an artisan đ
No, but he has picked up quite a few of those from me lol
A sick lightweight case is tempting. So is a sff computer case but honestly I donât even travel that much and Iâm not even that addicted to gaming where I would have to take it with me lol
Speaking of artisan my build is going to change a bit tmrw, Iâm getting a silver GT80 case so the GMK and artisan getting a new home 
What options did you get with the GT80?
Silver GT80 after Cam sprinkled some holy water on my eyes and I saw the truth
Gonna use the non loop brass weight on the side too
Time to mess up lubing stabs đđ
Any badges or buckles?
No to the grille, but I will have the nonlooped buckle so it adds some color 
i dislike shine
???
i donât like abs shine
pbt shines too
Oh nice! Pics when it's done!
bro got recommended so many sets at this point and still can't choose
you can tell us what it is, we won't tell Cam
Man I love the shine. Love the tacky feel when gaming

the noble shine
How do i clean my monitor
Pbt shines too + hammerworks is pbt??
well before i said 70$ but i changed my mind
and doesnât pbt take longer to shine and shine less
depends on the pbt too
usually pbt caps are not pure pbt, they are some blend with abs etc
Will do 
a lot of sets are a blend of abs and pbt, so you're never entirely safe
check out GMK MTNU, these are PBT af
Depends on how many Cheetos you eat while gaming and how oily or acidic your sweat is
depends
i just hate glossy/shiny things except diamonds, everything looks better not shiny
hammerworks
or
og cherry dyesubs






