#š§ākeyboard_modding
1 messages Ā· Page 531 of 1
someone needs to type whole essay about new switches and it needs to be pinned here
normies following whatever is trendy
benom normie calling others normie hehe
overrated, cant tell any difference as a dog water mid level val player
benom
I didnt say it would do anything, I dont wanna stare at lekkers
As I thought, you benom normies yapping about 0.04ms performance difference while being dogwater val players
just me :3 lets not generalize
but it is nice to have a bit more control
Tanks 
yo know

its nice to have everything on a relatively low value. gives me a weird sense of consistence
Available on wooting soon ā¢ļø (In summer 2028)
same with my alu plate
we will know in one week
yes we will..
after I secure mine 
the WORST part is it'll have that god forsaken foam attached that im not gonna use
man venom sucks⦠and imagine not having extensive rgb options
it would be funny if you got yours and by the time cam checks its already out of stock
Could someone help me? Iām donāt know what switch to get between Geon RAW, gateron jade and wooting X TTC KOM RGB
would be unfortunate but very funny
What should be the differences?
honestly seeing the way how rgb shines through on abs cap so easily i am not even sure how i feel about soft grow
Basically everything is different. price, feel, sound
none
none of these are particularly quiet switches, all being closed bottom long pole-esque
K and the click?
wdym
The weaker/ smoother
none have a click bar
Holy fucking shit wooting now has raw he and ttc?
Yeah
And rgb too?
Yes
We literally told you it would launch today cemal
I lowkey think they just did this for me hahahahahahaha
RAWs and Jade Pros are the best non boxstem switches (RAWs have tighter tolerances and better RGB, while being cheaper), KOM RGB doesnt sound as good as the POMs imo, but the RGB will have better RGB than the full POM switch
TTC has almost 0 wobble, clacky sound profile. Theyre louder than all other options
Yh but you said ttc not raw he
I think Iām going with raw then
we said both
if you dont care about the max stability and just want a no nonesense switch, then id recommend the RAW
Oh mb then
Itās a good option? My first custom keyboard
Yeah its a nice one
The geon raw
for your first, it'll be great
K ty
I heard the difference between raw and ttc is almost negligible?
best stock lube job too
Itās definitely not negligible. Theyāre very different switches
someone probably said that to not confuse you
they are both good options
yeah one costs twice as much and doesnt have a good factory lube job
RAWs were good, but I didn't like the chalkyness to them. POMs for me clears both, but everyone will have different opinions
jade pros are more stable at the bottom than raws btw, but that doesnt really matter. if youre on budget get raws or go for ttc poms
tbf we dont know maybe wooting did the right thing for their recolor
Do yāall think my build is good? Iām going with 60 he module geon raw premium keycaps, aluminum black and the foam pad (I think itās the black pad that comes with the case right?) and a isolate foam
Is that good?
Its a recolor
I want the rgb feature as well though
dont overlube raws, particularly the stem and top housing contact or it would feel sticky at the top
All of them are rgb fine
Dont overlube any switches for that matter
Oh ok
Yea we told you to get raws like 15 times last two days
In my simple test raws were more stable on bottom out than jade pros š¤·
How do I lube it to be the smoother and lightest click as possible?
i dont think this would be bad for rgb either, white housing. but dont quote me :3
another day goes by without a choice selection, you lose 1% to your RGB
But I'm far from a raw shill š
i dont own one
so far we're down -2%
Just wondering if there is a screwdriver in my order for independent frost case? Or do I need to prepare one myself
imo just oil springs or relube sliders
Or in the module pack
Sliders?
anything more and it will feel more sluggish
Whatās that part
The rails
everyone should be a raw shill, everyone's first HE switch should be raws, because VALUE KING and special bottom housing
on bottom housing
Can you show a ss?
Wooting doesn't provide a screwdrive in any of their products AFAIK
my first ones were raws they are really good
All the spring or just the bottom and top?
oil or donut dip
on top raws are tighter, on bottom jade pros. even on venom you cant really use 0.04mm with raws, but with jade pros its all good, according to mr josh
i am curious if duhuk key can take raw's spot though
in terms of quality at a lower price
duhuk key is like <30 dolla for 70
Donut tip?
i support the leaf if it was more leaf like
id personally just oil them
Ok on general them
less time consuming and virtually identical result
Ty so much
No
like bag lubing as opposed to using a paintbrush
Arenāt this the spring?
saves time
My stream schedule on Twitch is Monday 6:30PM PT, Wednesday 6:30PM PT, and Saturday morning around 10am PT.
https://www.twitch.tv/andyvnguyen
Okay, it's not a joke. You can bag lube springs.. and it is honestly the most time and cost effective way of lubing switch springs that I have encountered. Enjoy the tutorial!
In this video, I use TX 65...
saves time if u want
oil
with 205g0 at most on a bag
Otherwise its too thick
I wouldnt really let thicker lubes on springs ever
lubing the springs is not necessary right ?
on what
i dont know when i asked earlier for my ttc poms i ordered if i should lube the springs they said it is not necessary but its necessary to lube the stem but not springs so i assume its the same for geon raws ?
nah factories do the lubing differently so it depends on the switch.
oh ok mb then
the spring is dry
lol
if u want dry springs go ahead
three useless dots on the bottom housing
when switches arrive test them
with an without lube on springs
i think pom has not enough or literally no lube on the rails/ stem, but has lube on the spring.
raw has not enough or literally no oil on the spring, but has lube on the rail i think
stems are completely dry
yeah sno said the springs from the ttc are good
sno says a lot of things
sno also blocked yo ass
I said itās optional not that itās perfect
getting auraād by a femboy is crazy
yeah exact that is also what i said that it is not necessary
bro couldnt take the heat
vendors
K
mj im sorry but you have negative aura at best
Is he on his thing again? T_T
tfw when they talk to me
and i dont even be talking to them
thats aura
š
I'm guessing "yes"
isnt this the guy that needed 4 people to explain springs to him
oh no
š
Me getting blocked affects me so much
your rage baits doesnt work anymore pookie bear im sorryš
Itās basically if you want to then do it. The stems part is more crucial since theyāre dry, I bag lube my springs but itās not a āmust doā as much as the stem lube
can i take back what i said about sno blocking mj, i am sorry chat.
it was productive for a moment
Josh you literally are the reason half the mj convos go on lol
yeah exactly
Everyone else learnt to not engage with his teenage baiting nonsense
its fun for a moment man
whats ragebait was whatever turingtest guy did, 4 people telling you how springs lengths work and he pulls this troll shit
But i digress pookie
rule for thee not for me
i must have missed a day in physics 
Is there any other option that I can use to lube springs?
superlube 5100x
easier to get too
Springs should be fairly easy. Toss some super lube in a small tupperware with them and give it a shake.
springs are not fairly easy ^
Like the lube from wooting site?
Strong or weak?
Nope
planning to use these once hopefully i get my hands on some nice spring
dont use viscous lubes on springs
enough for it to be coated
I used gpl105 for mine
It's a liquid at room temp so it's very easy to apply it
Its bc Iām buying from the wooting site
So I should lube all the spring with it?
Just the bottom and top?
so are u just sticking to 205?
I donāt think my parent let me gonna buy another lube
Yeah from wooting
Id recommend oil over 205 for springs
You probably don't need to do this at all š
i would probably dip a tiny bit on the top if you use 205 for the spring
just paint over springs ig
K
that or donut dip
Ty
Donut?
Yeah thatās what I use for bag lube springs
diff spring lubing style
Pretty sure
How to do it
i think with dipping the idea is that as the spring is pressed down, it slowly covers every part that need to be lubed
Just dip 1 end lightly i assume
cheap and gud
I lubed my scroll encoder on my lamzu with 105 and it fixed the ghost scroll + made it super smooth feeling
Would recommend
What's ghost scroll?
dip one end of spring in lube, dip other end, spread
Is it like where you scroll and it doesn't like register?
Like 12 hours without new Wooting x TTC Switches
Must be rough

Painā¦
Mixing he and Mx in one container seems risky š
how come?
Grab a mech switch and jam it into an he board while not paying attention
Pcb Russian roulette
Bbbut ddifferent colorsā¦
us people dont see color
@glacial wind i chose to order some krytox gpl 105 oil if i gonna do something might as well do it good how many drops should i need for 60 switches if i may ask and sorry for interupting u again
one drop for 10 springs
should be good
oh ok so i need 6 then
Couple drops per 10 switches if youāre paranoid about not enough lube on the springs
for a new bag do 5 drops then 1 per 10
adjust to compensate
so 11 in total ?
Basically if you have extra oil itāll just be wasted in the bag but no harm done to the lubing or anything like that - so I usually edge on side of extra
you can also drop the bottle into your mouth, chuck a couple springs in and swish it all around like mouthwash
For a new bag just do double
5 + (60/10)
yeah that is 11
ok
Yeah just do 2 drops per 10, no need to overcomplicate it
11 vs 12
Hard to really overlube springs with 105 unless you go wild lol
that 1 drop makes all the difference
ok i will do 20 to be sure its done good
surely
xD
š
Itās not a precise measurement anyway because droppers vary
Wdym drops? When I lubed the springs, I used about 1/6 of the oil amountš.

everyone here is speaking against eachother
I just dip my springs into 205
i love you
everyone has their method that they improve over time
and then when i say 20 u say soggy springs
same with stab, i doubt we do our stabs the same way
Tldr is it literally doesnāt matter because extra oil will just be wasted in the bag
i will do 15 middle ground
ok ty i will do 15
Itās p hard to overlube the springs with the oil, I add a little more than I need to, then reuse the bag for the next batch of springs
Donāt sweat the amount, obviously donāt dump the bottle in but even then, thatās just cause its a waste of money lol
You usually end up with dry springs and a lubed bag instead lol
Not if u inflate the bag and shake the living hell out of it
also depends on the size of the bag i guess
I just use a sandwich bag
Well ideally youād just be using a small baggy
Is there a difference between Pom and rgb? Performance wise
Why is the Pom $10 more?
One is pom material
yeah i will see when i go get some bags to get tiny ones and then add like 15 drops or something like that and shake it up
Iām a little dumb what does that mean š
Aka Pom is a fancier type of plastic material known to be smooth
Pom isnāt see through so yeah less rgb but the rgb is still fine
nk creams
moment
Just not as rgb blasting as the see through one
So Pom is the better switch?
Hey Sno, you were rooting for DRX in the morning, right?
Technically yeah, although both are probably super similar if you hand lube
Course
I have the season 1 drx pistol skin
Was not expecting that stomp in the first map
Pom based material
Drx have been playing crazy well and their new players are basically mechanically insane ranked players
Maybe they win this time, it has been a while, maybe I can come back to Val one of this days
Technically speaking, I currently have Lekker L45s and a couple of Jade switches. If Iām going toāwell, I definitely willāadd HE switches to this pseudo-salad on my poor Wooting, should I consider POM switches? Iād just prefer not to have some keys appear darker when the backlight is on.
I havenāt had much time to play lately since I restarted YouTube stuff, but at least thereās a lot to watch now
Valorant season is so packed
POMs should be a decent upgrade for you, assuming price isnāt too steep for you
Cool, can you share your channel to follow?
Eh new stuff is still hidden since Iām testing formats and other things
I really liked Jade pros and tried POMs not expecting to like them and donāt think Iāll be going back to them anytime soon
I see
Better be seeing rogue guides sno 
Just in case, I want to experiment and build a set of different switches on one board.
Gmk cosmos + gt-80
I gotta finish up the wooting site project first actually too, so Iām not juggling two things at once
Finally managed to bother to swap my stabs so i changed keycaps at the same time
i really wish master bkk was during june or july
There might be a little variation since Wooting Pom is all white without PC top housing if you do different combos, but I donāt think it should be as jarring as the OG magneto colors
then i get the experience to meet my favorite pros but no 
uh huh uh huh
also putting on these caps took ages cause i wanted the correct legends on it

so they are actually in german layout now
So true⦠Pom IS based šÆ
Yessss VCT talk in Wooting server
I think you couldnāt pay me to start wow guides again lol
Whatās yāallās favorite teams
Thatās fair, game is giga dead and retail is just a different beast all together
š°š·
I really hope I can find the new switches in smaller quantities. If the price is reasonable, Iāll grab a couple more Raeds HE.
i am happy as long as no NA team win
Iām just a jawgemo fan tbh
Game stuff is just crazy limited in reach too, and thereās not much you can do guide wise for creative story telling stuff
For the OG Poms I think you can buy 10 pieces on Ali
ME TOO
THATS FUCKING SICK
So by association i like g2
hey š§
i was gonna @ you when i saw it but i know you got cosmos
š¤
xD
IDGAF
I hope t1 beat vit tomorrow just to see chaos that would happen
Jawgemo and t3xture are my goats
WHATS ANOTHER SET
less vs met3or?
Oh and PRX but they falling off..,
oh i forgot derke is there as well
as a prx fan I just support the best even if they lose
i cope everyday that they didn't go to bkk
Last years goats arenāt even here too. Both prx and gen g didnāt qualify
GMK Black & Gold Keycaps - evokes luxury without overstepping into guady with its black base and elegant, metallic gold legends and accents.Ā Groupbuy Period: February 20 - March 20, 2025 Estimated Ship Date: July 2025 Inspiration: Black and gold is a simple but classic combination evoking luxury and elegance. Thus
Iām glad we just like run it down playstyles lmaoo
LOL
125 honestly not bad
i doubt that tl would win
i haven't seen there games yet but i heard like a 2-0 or 2-1 game
the novelties look so good too 
edg 2:0 tl
kk hit a nutty ass shot in mid of split
kk the goat 
I kinda like those caps ngl
@stone flax do u know if the frog mini uses two seperate weights for inner and outside cause on their site it is stated weird
Iām shit so donāt take this as me trying to compare LOL
NA
peak asc3
LOL its okay
that shot was fckin nutty
i believe š
The shot itself was nasty but the fact he predicted the play was crazy too
Iām also NA west if u ever wanna q
surely you hit plat because of ttc poms š£ļø š„
yea the fact that he dodged the ult
He had dash primed and already had crosshair aimed slightly up
Me hitting emerald in R6, but trying valorant I canāt get past 1 game of death match without hating it š¤£
no lie, first game after installing the poms i hit a NASTY (relative to me) sheriff ace
hahaha I feel it, i used to never like tac shooters, but then i kept seeing clips and wanted to do cool shit
then i bought my first skin
then my 2nd, 3rd, 4th...
i saw that clip
the same feel i got when i tried cod, moving while shooting, tf is going on
Comes back 5 months later, same thing
LMAO
that was probably the hardest habit to undo when I started
cause most other shooters reward ADSing all the time
Only thing is the game wasnāt always like that back in the day š„²
er, it helps greatly
now i can't help but counter strafe in fucking marvel rivals
im just cooked
Now itās just money laundering simulator with snoop dogg skins and gimmicky movement
u had that jett clip right
who want me
It was sheriff ace
hello
LOL on lotus right
?
W gaming
yea
my goat

Iām down whenever you have the time I just got a lot of exams coming up š„²
word ill just shoot u a ping and see whats good
lock in twin
get that education
Thank you man 
Now from what I heard there an aliexpress for the fr4 and carbon for 80he?
Keyboard fun store
Thank you š
Planning to experiment and actually do something with the 80
Left it stock but only lube the raws
Maybe I might swapped the stabs
Cause they are okayish but the spacebar is so bad I wanted to attempt to balance them
tuned stabs good
So I made an oopsie and got the fr4 plate w/flex cuts cause i just thought it was cool gold designs lmfao
is that bad for calibration
Say less if I you want me to tune them save moneyz ez for no buying stabs :3
just tune and grease
very tasty
Very tasty
I only got the white FR4, but as an extra gold enjoyer that saddens me
I also saw that, but Iām not sure if itās worth it. Iām perfectly fine with the sandwich mount, but 700 grams is just too light. I want to find something to increase the keyboardās weight, but I donāt want to buy a metal case.
possibly, use standoffs
Ur right abt that to be fair
Is that white variant on Ali?
fuck i lost my standoff screws lol, i have it gummy o ring mounted
fwiw it seems fine as is
are you getting misactuations?
Gold one I donāt think is on the keyboard fun store
Ahhh okay
are we making up words or is this a real thing
oh LMFOA
Wanna say itās on torontokeyboardman where I found a similar one
naw not so far, but it's been a week
It might be
This custom keeb is 2x heavier than 80HE, but it has a thin plastic case and just a silicone pad.
How in the world only thin plastic case and silicone pad, surely you put something more to make the tones different
Maybe I didnāt phrase it quite right, but the silicone pad actually makes up half the weight.
Other than that, everythingās standardāthin dampening, a sandwich mount on flex cuts, and then itās just solid plastic and the PCB.
Tempting NGL
wdym qwq
Nice looking set 
Those are some good looking caps
I'm currently debating this one though https://cannonkeys.com/products/gmk-verdant-retro
If only keycaps didn't cost so much
oh i see
You end up paying to support them over just for keycaps (higher wages and other things), but GMK quality is nice, albeit pricey
Oh yeah I'm aware
It is rather shocking itās THAT expensive, but a tough pill to swallow
I think as part of the hobby the keycap sets are the easiest thing to snowball out of control
I think GMK British racing has some similar colors, but might be a little more green
True shit right there š
I want so many of them but I only have like 1~3 keyboard to use them on haha
True, Iām maining lazurite, but hunting for a secondary set for when I get bored
Iād swap them for a different set every 3-4 months maybe
To keep it fresh
Apparently it's the same green as the GRB which I already purchased
Ah
So I was considering that set to mix and match
Another keyboard for the collection
@harsh dove can i ask u something ?
My delivery guy dropped off a venom with a similar case too 
@harsh dove are you still rocking these key caps if so are they worth putting on my board?
HE IS DOING IT
FINALLY
the best mod one can do to wooting, the pcb swap mod
The satanic church of venom grows š
Not still rocking em but one of my fave sets, so yeah
how do i get started with modding like what terminology should i know
@harsh dove u said the frog mini is grounded though usb right but since it does not use a spunge like the optimum case how is to done ?
check out #šŖāmodding_faq
Yeah
it does not use a spunge like the optimum case so i wondering how it is done in the forg
maybe it the usb-c port on the pcb touches the hole on the case
Possible
afaik it's basically the ground pin on the USB connector is directly connected to the PCB's ground plane, making the keyboard's ground tied to the computer's ground.
Ah interesting
doesnt that mean the grounding pad is copium then?
also despite i say that, i dont think usb-c port touching the case hole directly is a good thing for sound and feel
Yeah hmm cause when u connect the usb to the usb post does it not always connect that pin ?
just tell them EVERYTHING HURTS
ahhhhh
It does hurt...
yea i know, so you arent even lying hehe
I'm still going cus we finna play against our OPs so we need these practice
Maybe one of the wooting employees like Tony can enlighten me but afaik that's just a safety precaution

what what what if frog has design flaw
then i can finally be content with not owning one
Also cause Wooting PCBs have ESD and EMI protection
centered usb port tabpole mount heavy case when 
So as soon i plug in the usb connector it is grounded the venom ?
Geon seems to be moving away from tadpole mounting tbh
yea...
honestly i would love to try any soft mounting methods that is not gasket mount
too many cases are gasket mount
Wouldn't say tadpole is that soft
i see anything softer than friction fit as soft, which is probably kinda fcked to say now i think about it
mb
Canāt afford another set, this will have to do
Hard to type tho
So basically i dont have to use the screw i am using in my tofu friction build also ?
No, you don't have too
Aaah
How else would the case get grounded?
daughterboard
50a is
We have nice keyboards
Orā¦.
okay man
Brutal
Yeah since the pcb is grounded no matter what
Yeah even wooting says they're very low
just get leggera
I don't wanna get tingles from my keyboard. Not those kinds, anyway.
i mean i friction mounted my tofu60 for a year and it was all good. i still dont fully understand why that would happen
(NOT TO FCKING ARGUE BTW, JUST CURIOUS) 
Yeah i was just scared since i saw wooting talk about it when they released the optimum case so i thought i always have to use something to ground it or else it would bot be grounded
It's just that the case isn't grounded
very low chance for anything to happen tho
are there any recommendations on stabs for the 80he?
So the frog mini case itself also is not grounded ?
right but the PCB is via the USB port
Things get charged sometimes. I'm sure it's fairly unlikely to damage your PCB, but grounding electronics you touch just seems like good electrical hygiene to me.
Aha i see ty very much
Plus when the cat gets near it and yells out "prepare for the arrival of Zeus, god of thunder", y'know
Yes
lol
idk if Venom has any ESD Protection but I'd assume he does too
When you scroll up occasionally it scrolls down too
lil bro asks you to stream but he cant watch
hmmmmmmmmmmmmmmm
My Atlantis mini was first batch and they all had that issue
Logi GPX 2 had that too
But I lubed it with 105 after blowing any dust out and it feels great
No ghost scrolls and it's super smooth
I took my gpx1 apart yesterday
What a hunk of overcomplicated shit
ribbon cables lol
In itself it's like 14gš
mouse modding 
Was gonna try to steal the scrolllwheel for my beastx
But how logi made it, it seems to be "proprietary"
Classic
op1 is so easy to mod
Geon raw or jade pros hmm
what case
Wooting 80he gt 80
probably jade pro would be nicer, i think raws shine when you can hear more of the case reverb but jade pro makes muted board more lively
but just my 3 braincell stupid opinion
can we copy strike cam
no
I don't follow the rules
@calm pulsar cam's venom time
i am listening to my lady friend ranting stupid shit cant have sound on
gonna watch in silence
sry didnt open the chat
@high sphinx Cam is building a venom frog on stream if you're around
Ohhh
I had that problem with my hyperx pulsefire haste 2
@fluid ravine
I'm still at school brah ššššš
ahh
Oh wait I can get my ear buds and tune in for lil bit before practice start
4 mins till school ends
just sit on the bench, hand water to the boys and watch from your phonhe

Lol
i just clicked these 3 in order, after clicking enter bootloader the device would reconnect in the bootloader mode
@harsh dove supposed to look something like this when it enters the bootloader mode
What are u doing rn?
the little window pop up is not showing but that should say 7U IAP or something
for me the first time i did it
it was like buggy
i had to replug and then it worked
and reload the page or something idk
actually cam maybe fine, the version on geon's vid is also (unknown)
@harsh dove https://geonworks.notion.site/VENOM-HE-Beginner-s-Guide-4b661bd8860741bfba9d5c658cf576b2
VENOM 60HE / 87HE / 88HE (GEONWORKS own firmware)
well you do it like it says in the guilde... weird
Whats going on
recieved this in the mail today, what're the transparent sheets for?
and it looks like it comes w/a switch pad w/the WASD part preforated to cut out
to be able to cut out*
ooo ok
what about the clear plastic sheets?
Good to know that I should cut out the WASD
@harsh dove https://geonworks.notion.site/250213-60HE-Switching-firmware-1998dcc8feb680e3a14ef90fe270fdbf the link they sent out for reflashing hte firmware
You can put it in the case if you want to
theres another one that came in thatb looks like its for the switch plates
steel sounds so pingy
Might be a tape mod?
Check if it has as peelable side
naw it has the same template as the switch pad, w/the WASD able to be cut out as well
just unsure what its for or what it does
theres one for the bottom of the case too i should add, but this one's diff
no adhesive
Oh, then it's probably to go on top of the PCB as well as the foam. Just keep in mind putting stuff between the pcb and switches is 𤷠for perf
Can't hurt to try it though
gotcha!
thanks man
it shouldn't affect it if i cut out the WASD part right
as in performance
Well, not for those keys
Yeah look at the 0:23 mark in that vid
I need opinions, ttc Kom rgb from wooting or raws
depends on budget
Nevermind the price answered that
and how willing you are to spend an afternoon lubing switches
raws
wait is that for 70 switches? da hell
85cad for raws after shipping
Yeah, canadian monopoly dollars
even through us?
ah canadian
Yep
damn
i know the ttcs are already like a dollar a switch easily in the us
dont wanna imagine the cad per switch
Yeah 70 pack is 83$ cad before shipping
anyway guys
93 cad for poms, 83 cad for rgb
look at my gt 80 with gmk cosmos in wootstations
The TTC Magneto is only $8 / 10 from Milktooth. The TTC POM is $11 / 10.

Obviously not exactly the same switches but the sound tests sound pretty similar to me.
The poms iirc are best for stem wobble
Does anyone know how to tell the L45 V2 from the OG L45?
Its borken lol
do i cop?
Geon sent me borked PCB
no
why
its optical (shit)
Most likely not
:c
How i remember only Corsair k70 wireless has a hotswap
And opx switches is garbage ngl
my budget is like 50-60$
If you want a Corsair keyboard, Iād recommend getting one with Speed Silver switches.
F
If youāre choosing from mass-market stuff, are there any other alternatives? Especially from Corsair?
83 looneys eh bud
Yep
After shipping for pomsš
I'll let you know if POM Beastx is the ultimate tech 
is the PC switch plate the only plate with that feel and sound?
I'm using fr4 and I'm not sure how much I like it tbh
what particular sound and feel
To be honest, even though I knew in advance that POMs would only be available in quantities starting from 70, Iām still disappointed. :(
how about this one?
Can't really describe it well tbh
bless free shipping
PC plate has a metric fuck ton of flex to it, it flops around like a dying fish, but gets you a very muted/thocky experience @night atlas idk if thats what you want or not
Yes I do want that, the fr4 is a little harsh for my personal taste
I like FR4 because it gives you a balance to clack/thock without being overkill stiff
try it out then imo
I have a PC plate aside, just wanted to know if there's something else similar that I could experiment with
i want a fr4 plate for my 80he
i think theres a POM plate too thats less stiff than FR4
but iso plates are hard to come by
triple pom action
Ya that's fair, I just personally liked the PC better, although the fr4 does make my keyboard look marginally cooler
Idk only sh i can recommend you is cidoo qk61
yall what happens when a game requires arrow keys but you dont got themv
mod tap!
tbf pc plate is great for rgb tho
based switches need a based plate 
I'm currently using a qk61 for work!
u better not use my favorite switches against me
85 cad for 70 raws after shipping
Might pick them up soon
im just sayin they're between PC and FR4 š
- white pc plate
but yea qk61 is goated, but just know the firmware/json to reprogram keys for it is mad annoying to find, make sure u find the epomaker v2 json for that model
to whoever was looking at it
for 70????????? jesus
idk id just get POMs at that point
23$ shipping
already paying like you are
Its 53cad before shipping
I want raws for rgb
fucking christ, thats literally my GT80 case lmao
Rural moment
wooting poms also have a diffuser and are also white, but yeah...
130$ for 70š

the curse of being canadian i hear
Also want to throw a white pc plate in
Yep
canadian monopoly money
At least we have nice views
get it custom made the files are available at https://github.com/WootingKb/wooting-design
we need a beastx for scale
the plate file isnt there individually 
xray
I will unironically take this photo next time I go there
W
cable broke?
not sure if you saw my message, but my beastx is no longer cooked and will be arriving on schedule like I predicted 
what a roller coaster of an experience
W
Cant wait for your opinions
SO I should have my initial thoughts since this has been a long time coming haha
I found the mouse surprisingly comfortable for how aggressive of a grip i have with it
yall what about the royalkludge rk96?
Im expecting to enter the magnesium skating rink
My beastx mini top shell weighs less than the gpx's side buttons and scroll wheel "tray"
Whatever the hell you'd call this
easily exctracted from the stp
Any pom plate users in chat
the plate is a full 3d plate standoffs attached
also do these holes have any function?
Like 1 day without new POMsā¦.
Thatās fucked lol
tray mount
technically you would still need to extrapolate the dxf out of that to get one cut
if fus
depends
plate alignment
could get it cncd for the standoffs
ok mr moneybags 
and the hole are to align plate and silicone pad with the top
i mean they did ask about the standoff holes
there is none
I wonder how long itāll take for them to start selling 10-35 pieces on AliExpress.
ttc pom/rgb are on aliexpress already
wooting ones not sure if ever are going to be sold there
Yep, i always mean collab POMs
(also even if, you would prob rather want a DXF + a drill file)
ik there is no holes originally but if i want to get it cut maybe i'd need to account for the standoffs not being there
also this is too much jargon idk what any of that means hahaha
dxf is basically a 2d file to get it lasercut or such (the format is just called dxf)
Actually only 10hoursš
and drill file is just where to drill holes and how big
but yeah reason we dont offer a direct dxf is that the 80he plates arent lasercut afaik so we never had one
i have the ultralight endoskeleton
if you want ti
you can make one out of the 3d file
forgot how but it wasn't hard
not a thing
at least not at a reasonable price
china it is
if you wanna do FR4 you also need to chuck it into a PCB editing software
and add 1 via

otherwise they refuse to make it
or rather
any feature would work
via is the typical thing people go with
so i'd just get it from a pcb manufacturer?
yea
jlcpcb or pcbway
jlc sometimes complains about holes that are too small and just refuses to make it
lemme just show you how to get the dxf (once I figure it out)
Am I supposed to take this out or put it on top of the tape?
hide everything other than the plate and make a sketch on it (click sketch in the top left and then just click on the plate)
select everything by dragging a box over it
ctrl+c and ctrl+v to copy every element of the plate to your sketch (the pasting takes a while) and then click ok in the box
hit finish sketch on the windown in the right and you should be able to right click the sketch on the left and export to DXF
heres an stp with the plate modified to have the standoff holes
pasting took ages
thats the dfx from the modified stp plate
as you can see holes galore
@fluid ravine the bottom right ur new mousepad
also u shouldve waited a lil longer to order
If we put the wooting x. Ttc kom pom in a non wooting keyboard, will it explode?
@kind helm not sure if you've seen but the issue was actually the cable
me thinks yes
Itll secretly trick the board into thinking its a wooting through the use of propaganda
In the words of mark
i was honestly kinda guessing that maybe it, since it was able to detect and load sometime
just extremely slow and weird
good info thank you sir ā¤ļø
yeah GPster suggested and it worked and were like what the hell
Whoa new sticker drop?
Yup
I wish
Did stream crash ?
is he doing the build with the tofu case
Nah now finishing the frog build with venom
his other one from the same guy is working fine, not sure how the xray one was working with 80he and wasnt with venom lol
ah
I knew it
Was thinking to myself why not try diff cable
Cuz I read this
thank you for this, i will see what i can do with it 
thoughts on the sound?
I think it sounds good what is the build if i may ask ?
80he zinc alloy, jade pro 400g in everything but wasd which is lekker v2 100g (cause the jade pro sound hollow at 100g i dunno), tape modded with gaffers tape and painters tape, and i added extra foam gaskets in the case
(also some coffee was spilled in it recently but i dont think that impacts the sound)
what do you mean 400g
.4 kg
popeye fingers š®
Sounds good
tsangan
oh and i got a KAT profile keycap set on
Nice
i just like the weightiness of it, feels good, also it makes the he switches sound deeper and nicer as an added benefit
https://www.youtube.com/watch?v=Eupc-GZtThg @calm pulsar omg this looks so gooooood
shadPS4 is an early PlayStation 4 emulator for Windows, Linux and macOS written in C++. Test bloodborne pc at native 1080p and unlocked fps.
ShadPS4 0.6.1 WIP mainBB diegolix29 (18-02-2025). Nvidia Driver 572.42
shadps4 custom build https://github.com/diegolix29/shadPS4/releases
Mods/Patches (Recommanded)
- SFX Crash Fix (Intel CPU Only) https:...
oh my days
someone know if Silicone sandwich pad s the same as friction fit pad?
why
damn this is pretty much ds3 level graphics, nice
30 fps on PS5 literally tanks the graphics from what it already is (not great), but now the art style pops so much more
that and 30 fps on roller feels like my brain is tearing just looking at that movement
holy
yeah I might play it again
just to get to DLC since I didnt realize it was like ER where you gotta do it before finishing
#whoops
I might get to it, but I need to replay ER, cause I finished it before the dlc came out
oh man
the amount of $ id pay to wipe my memory and replay ER from scratch including DLC
I would do some terrible things for a bloodborne pc port
id do something similar for Sekiro, loved that game too
Shadps4 my friend
community already has
Uh sekiro is on pc
I have 40+ hours on it but cant finish it lol
but it is really enjoyable, I love the parry gameplay
in lies of p as well
what I love about sekiro is that the game is as hard as you wanna make it for yourself
japanese mastery component to it is super fun so you feel like a real samurai 
I played Dark Souls 1 as a meme, but Sekiro is the hook that fromsoftware has captured my attention span and has never let go
yeah there's probably some cheesing stuff, but I never look that stuff up xd
btw Cam just got a package of wooting poms live on stream
im stuck unironically on 2nd to last boss bc i dont wanna farm mats lol
ye back when i didnt have a PC #growingupmacuser
Man I was entertaining getting a 1440p/360hz OLED but motion clarity on TN 360hz with DYAC is better
Hey now are you an insider
cuz its got a volume knob a screen its hotswappable its got 3 connection modes its 96% and its creamy
and it comes in white
Hey now
You happen to have the inside scoop or something???
hows the lube on wooting pom? any improvement?
Whatās going on here
i was in game for a sec, gotta lock in
Oh Lord šššš
Why??
so u didnt have to pay like a band on shipping





