#đ§âkeyboard_modding
1 messages ¡ Page 516 of 1
the ones I sent are that, theyâre just not great compared to the top linears out currently.
but they are clicky, if thatâs what matters most to you, you should give them a try.
Theyâre really cheap.
Well im looking for sound and quality and if what you say is true then i would just personally wait
Geon RAW's, I bought another set
yesssirrrr
finished lubing right before my dad comes home
Gotcha
Ok now I see it but struggle to comprehend how it works
But I donât have one so meh
It replaces the brush?
nah
Or pen + brush = goated?
Pen+Brush=Goated
idk i use syringe which is probably not the best method, but fast af though
Pen tube has lube
Little lube dispenser
and there is a gear at the back of the pen which you rotate to push out the lube
i just squeeze a drop on each side of the rails and a bit more on the spring, then close it. takes me probably 1 hr something to do 70
basically
it dispense into the brush
the gear makes one click per turn
which dispense a specific amount everytime
Pause
that's one way to do it lmao
xD and i just pray that by pressing the switch the lube evens itself out
yeah those lube pens are great. only downside is not refillable easily but it is faster and more convenient
Grrr now I find out
yuppppp

Yeah consistency would be nice
Im being spoiled rn
literally this pen costs the same as the other 3ml krytox sellers
like from divinikeys
they all cost like around $7-8
liquid gold
idk how some people fill up their stab with 205, probably one keyboard would use up all 3ml
nah for real-
2 disadvantage about this lube pen doe is like having to dispense a big amount for like lubing stab wires
and it's not refillable
that's about it
for me
i gotta add more lube into my stab wires ngl
some people jam it like this with 205 appearently
at this point that dont even look like krytox SOB
but the guy who did this was using 205 for the method
Wtf. You only need to let out a little
before he switched to this cheaper lube
yeah i only fill it up at the front of the wire where it inserts into the stem
"Less is more" was not taken into account here
honestly i dont hate this method
like i only like do a thin coat at the clips of the housing đ
especially with cheap lube
just for a smooth contact
take a bit of spamming to make sure its not mushy but once its good its probably good forever...
also like another problem for me is that when you do this for plate mount stabs, every time you have to take em out
I used loctite dielectric grease for stab wires
And just 205 for the housing/stems
yea honestly i am surprised that is not making sticky squshy sound.
but it works

just costly with 205 espeically
I think âmore is always betterâ is the motto
I mean thatâs close to what Iâve (accidentally) done in the past with grease
Saw Gateron releasing new switches. Will they be compatible with wooting?
What switch
Magnetic jade ruby
these are jade pro
lol yeah it will work
Gotcha
Jade pro recolor
Thatâs funny
They just canât stop printing money
GG
All black TTC POM when?
it is a new years special, that's why it costs that
Cosmos rn 
lmao that description

âExhilarating gaming performance. Enhanced precision. Thocky soundâ
For only $85?? What a steal
imma bout to buy some glitter off amazon and make my very own special new year edition raw he
tf
only comes in 70pcs or 90pcs, so its gonna be at least 245 packs sadly..
Get ttc pom instead if you dont have it
I WILL NEVER BOW DOWN TO RETARDED PRICE TAG
Well this looks like its retarded cousin
you can actually just get a pack of ttc rgb for like $62
just $62 dolla
i thought jade pro was expensive after discount
but thanks good info as always â¤ď¸
0.88 per switch, at least not 1 xd
also i am really enjoying my raw he with salv. i dont plan to ruin it in anyway. tofu 2.0 i am still thinking about doing something to it
btw mr cam "||" before and after text allows you to hide text with spoiler. me plan to enjoy this master piece later
i heard so many good things about it. i am waiting a bit for the mods, see what people do with it
just sayin, in case yk
holy now you mention it with tariff switches bout to be 100+ usd
time to quit
Go to Saudi instead and get seats lol
In all seriousness, having no hat in the game, hopefully they end hostilities
what would be some good switches to change to for a thonky kinda noise?
Is this true? that a new wooting 60HE Pro is on the works? im also planning on venom, but if its true i might wait too
Wooting employee's official stance at the moment is there's no plans for it yet, but if they start losing enough sales to competitors I would bet they release one.
Why would they lose sales doesnt wooting has the lowest latency?
Yeah already talked to them a few hours ago
Venom is 8k polling in 60 format, Wooting doesn't a have a 60 that can do that, so no.
That's why I asked abt any other people if they have a problem or not here
8k doesnt make a huge difference?
No, but gamers are always chasing numbers. Why else would Wooting release 80HE in 8k polling.
Yeah you right but isnt it not even 1ms difference?
main difference on venom is that it doesnt have a deadzone
for rapid trigger and stuff
Who cares about that 0,8 i think?
You may share that sentiment, but there is a market that chases even the slightest advantage.
Deadzone?
Venom also has daughterboard which allows you to move the USB port which unlocks alot of other aftermarket case support, that was the big one for me.
Deadzone â grey-colored zone â is a zone of analog control, where nothing happens. This can be helpful, if your analog controls are too tight (lessen the deadzone to make the control more responsive) or if the control is too sensitive (make the deadzone bigger to avoid the accidental actions).
Only advantage I see is just spending more money on my venom đĽ
Tsangan is another bonus , aesthetically.
true, and I like having a dedicated delete key with split backspace
I mean, i also want the best but how much latency the venom got?
It's around the same latency as 80HE, 8k polling = 0.125ms
Ah and the Venom doesnt have it?
Arcwyn, as much as I don't know shit about the software and what not, can Geon add a deadzone like the Wooting later on?
yeah, it is configurable on venom, can set to 0
was it solved or you gotta wait
Well fuck everything else lmao, I'm here for the board, to me all these features are a nice to have lul
Wait how much is the Venom? half the Price of Wooting Module?
Pcb is $65 in the US
Could be around 70 depending on where u buy
Even plate+pcb+stabs it still cost less than the wooting module
Geon is building quite the rep for themselves. Their peripherals already have a good rep. Switches, modding tools, cables, cases, etc
During free shipping event
Geon also has goated switches
I spent $105 for plate, pcb, stabs, and Geon spacers
Crazy steal
Like $35-40 cheaper than the module
And, this may be unpopular opinion, though I love my 80he, I still think the format was a mistake. They should have gone TKL. At least they added the daughterboard to it though.
No hate wooting 
Guess who has a TKL though? 
Not me!

Ok ima go to sleep
I got school to crash out about
Failed my fking mock state exam
I'm super duper disappointed
oh its mock at least
Yeah.
How good are the Jade Pro Rubys?
i think people severely overestimate the amount of people who know or buy non mainstream stuff
i love geon and his stuff, but normies do not know about geon in the slightest and do not buy those products
he's very big in the custom scenes, but it's not really a mainstream thing and I'm not sure if it ever will be
Oh for sure, if Wooting is niche, Geon definitely super niche.. for now anyway.
realistically wooting is working on an 8k 60he with just general updated specs just because it's time for a refresh, not necessarily because their sales are being hurt by venom/made etc, but they can't talk about it because it's behind wraps still and they don't have a more accurate dates to give yet
What are Keyboard features that still can be implement in a Keyboard?
mostly sidegrade stuff at this point. Maybe 0.5 rt would be interesting to mess around with
I would bet that's the case as well, it's only Geon and the other obscure Chinese manu's that have 8k 60 format for now, but if brands like Razer or Asus come out with one, then I would think that's definitely going to speed things up for Wooting .
i assume razer/asus etc are already having them soon
and that wooting already has it in the works and it wouldn't 'speed it up' but rather they might be more inclined to release info on it if razer/asus were to release a 60% 8k competitor
That's fair
from past releases it feels more like they're not limited by 'how fast they want to go' but rather how much manpower they have to spare for each project
True, I know in a previous video they did say they hired more staff, but correct me if Im wrong, it was more for shipping, support and distribution was it not?
they're actively hiring for places like industrial designer etc as well according to their careers page
i don't know how actively their careers page is updated though
calder did say in past videos they were working on expanding the team so they had more manpower to do all the projects they want
So there is a new PCB in development?
it'd be safe to say there is always a new pcb in development
when it releases though we don't know. Last they said is there might be more bigger detail updates on this years stuff in the later computex-ish dates
nah pointless release
they are jade pro
chinese new year recolor
Less Wobble no?
no
they're literally same thing
just slightly different material inside
exact same +- flux
So they cappin? đŽ
not capping, it's just what switch companies do for chinese new year
they release 'special edition' versions for collectors
"More durable - More refined in feel - more stable (less woble)"
i don't know where you heard that
x
but you can read the spec sheet yourself and stop listening to x
Gateronofficial
the spec sheets are the same
They posted it by themself thats why i said they cappin
that's just marketing lingo
"more durable, more refined, more stable" *with not comparison switch
I did not listen i just said what they said tho
what if you compare that statement to switches from 2018 for example
100% true statement
it's just marketing fluff, the same way they said dual rail is stable
damn wtf
then they're outright lying
because the flux stats they themselves list don't say that
the lifetime did improve but stability did not improve
I think ttc might be doing the same with the snake switches lol
Yeah only Lifetime changed?
nah ttc snake at least aren't a lie
they did indeed see flux improvements, but they're very minor
its one the things is that the marketing team knows its not true
and the customers knows its not true
Im still rly happy with my Raw HEs
im more interested in mold improvements, so its wtv I guess
flux changed on snake ttc vs pom ttc from +-15 to +-10, and +-60 to +-30
oh no wooting is doomed, how will they do 0.005mm RT /s
So Air can just activate ur Key?
yes and no, that's actuation point
anyway, reviewers are all saying to ignore the 0.005, literally unusable even with ttc pom
I dont even know if its even necessary to go below 0.1mm
Like do People rly feel a difference atp
ofc not lol
they dont, they just want the option
its in the same realm as 8khz over 1khz
no one will feel the difference
but they are happy to have seen the theoretical numbers
Yeah i understand that def
The only thing i wish on my wooting to choose a rainbow color patern in wootility
we want to improve rgb stuff anyway including sharing/importing just parts of a profile
I know i can do it with 3rd Programms to get for Example Rainbow with Colors i want but i dont know why Wooting still not have that option
the reality is teenagers saying they want 0.01 actually want fake 0.01, where it's 0.01+noise control that stops most inputs so it isn't behaving like 0.01 but rather .07 or whatever, then they can say they use "0.01"
Is that something you guys could just add as an option in wootility or?
Like beein able to choose which colors in rainbow
this is all wootility only although even if it required firmware changes that wouldnt be an issue
So when we can make a custom rainbow color patern?
you can already
yeah with 3rd party program?
you just have to paint it on yourself rn
no you can change every single led color
the presets are just that. presets
oh well yeah then the when is rn with 3rd party and no ETA on with us
okay thank you anyways for that information!
@polar girder itâs not an exact recolor, the top housing is improved: #đ§âkeyboard_modding message wobble doesnât seem any different from Jade Pros (despite Gateronâs marketing: âRefined, Polished, Optimized.â): https://x.com/0000_fafa/status/1889961366464966814
If the temptation wasn't already bad enough..https://geon.works/products/group-buy-snake-r2?variant=45607750107299
To add plates, PCB Please click here(Add-ons) Group Buy Time & Date Period: Feb 13rd - Feb 25rdUnlimited GB Estimated shipping date: Late Q3 â Early Q4 2025 Specifications Layout: 60% WK/ WKL/ HHKB Mounting style: Gasket O-ring Mount Typing angle: 6.5° Weight: around 1.7kg after assembly Anodized, finely bead blast
its a db case though
Sorry db case?
daughterboard
Venom has daughterboard?
it does
Yeah lol I'm sorry bro Im missing your point? Therefore Venom would be compatible right?
I mean you posted it here, I thought you meant it as a possible case for wooting 60he lol
if you have a venom its all good
Oh no yea I know Wooting is not compatible , I'm saying temptation to buy Venom 
Yea definitely, Leggera is nice and all, but just not an aesthetic Im going for
fair
if i scrape my key it actuates
If you canât beat them, try to beat them in court đŁď¸đŁď¸
saying this while claiming all closed bottom magnetic switches infringe on their patents is crazy work
hejinâs first magnetic switches were almost 1 to 1 clones, so calling that unethical I can understand but how the fuck do âall closed-bottomsâ fit into that? đ

conveniently too pixelated to read a damn thing
lol should cherry sue them for mx switches then
Someome should sue them for the Jade Maxs
What's that one app that lets you see the state of your lekker switches live?
Hi, this might be a dumb question but I've been unable to find any information about it:
Is it possible to use a daughter board for the USB connection using the Wooting Module? (I can't find a picture of the usb connection on the pcb anyway)
80he?
60
60 doesnt have daughterboard support sadly
You the best
Ah damn is the connector just pre-soldered onto the PCB?
Huh Gateron is coming for our Poms then
yeah pretty much
you could maybe solder another usb-c port on there but it would be super hard
for everything 

I hope i can get my hands on some before anything happens
Ttc are too expensive already
it would be hilarious, doubt anything happens to ttc or raws, they are still somewhat diff
unless maybe they are going for literal clones, but they are shit anyway
I canât read the text but KoM is the first competitor image in that tweet
they canât sue everyone and win, surely.
âall closed-bottomâ
thatâs like 100+ switches from 7diff manus right there
đ¤Ł
Also feels like it probably took them too long
Right Iâm just saying theyâre clearly not thinking KoMs are exempt
yeah, itâs time for TTC to wrap it up, itâs over. đ
đ¤Ł
theyâve been on these threats for over a year at this point
𤡠up to a judge if they go that route
nothing ever happened afaik
Ah I didnât know they have a history of sabre rattling
koms have 2 small dots on the bottom, not fully closed 
trueeeee
two tiny dots
lube ejection? they have cooling holes to keep the magnet cool!!!
^ not a joke.
Oh good point đ
Me when i get paid biweekly:
week 1: lekker pom
Week 2: ice soup
so real
If you can afford the soup
Same but i bought gpu and new pc case
Pc looks good now tho and clean too
Did you fix your benom
All these actions, tariffs and patent infringement sabre rattling⌠turns out it was all an elaborate ploy to get us to panic buy Poms
Why is it near impossible to remove the UwU switches yo
Its like someone glued them in when I wasn't looking
Lekkers hold on tight
So tight I'm scared to cause damage
Take off the plate and push em out from below
Genius
They might have lil clips on the other side, you may have to push those in
It does. Its smol
I mean it needs something to hold the damn switches in
Its holding them for dear life lmao
Check if there are little clips on the backside
Yeah I guess so đ°
You might have to press those in with your nail or a flat head screwdriver
Board has been safely removed
Get the drill
This is meant to be a surgery not a disection.
That was one stubborn switch I'll tell ya
lol
Iâm sure there are some raw legs and clips hiding in my 80he case
Explain that sticker for the old plz
Its a meme that went off a little while ago.
Honestly I don't even know what its about
What hope do I have when the memers donât get the memes đ
You're doomed
im just a chill guy
just cleaned my pc from dust and replaced ram, hope it boots upđ
Alright I get it now đ
More mem?
yeah swapped to 64 gigs from 32
Nice solid move
Brutal part is waiting on the black screen while it memory trains of youâre on newer amd đ°
true haha
good thing I didnt forget to clear cmos to make sure mem clock settings are reset
For gaming
nope, just escape from tarkov
well I play other games, so swapped to have a bit more stable 1%s
also have to run virtual machines for work from to time
also will get into music production and possibly video editing soon
Virtual machines/containers
more ram for the ram machine
when I understood the weakness of my flesh⌠it disgusted meâŚ
Just downloaded more ram
didnt download ttc poms tho shaking my smh
link
Gateron big delulu

Ok i pull up
Was wondering why my H key was weirdâŚ.
Forgot to remove from the sound test lol
For anyone interested, CF plate
It was for the sound test
Difference was so good I had to record even though sound is secondary to me
ah yeah
The H was also brighter
Thought it might be from the diffuser from the discussion earlier
Nature has healed 

I so wish they made a shine through version of these
You should try to get GMK cosmos, I think it would work really well with how your case looks in the light
Theyâre both kinda shiny
But I play in the dark đ
The dark does look heavy with light I admit plus those caps look very very nice
Let me show you its natural state
Gd
Yeah Raw sound like every other HE switch there
TTC POM finally head and shoulders above the rest
The oled black hits hard
+1 for daddy Jupiter
đ

I still remember going to a planetarium in the 4th grade and Jupiter was the one planet I saw there
Shit was crazy
@kind helm just got an update abt the Venom firmware, they just made a guide to fixing it. I took a look at it earlier and I saw that there was 2 buttons on the back of the pcb and was wondering if I remember them being on my pcb or not. Can you check for me by chance? There should be a reset and a bootloader button.
First one Raws Second one Poms?
Probably because it was lubed 5 minutes ago
Should look like this
As in the pic, first are Poms and 2nd are raws
Both Hand Lubed?
They are hand lubed
POMs irl even lubed are the same loudness as stock
Both fully hand lubed
Theyâre decently loud
Top and bottom, bags spring lubed, stem
Yeah mine has it
Is it just me or does the bottom out for Poms feel like a smooth crunch
Mm mk
What does that mean lol
Arent Poms louder than Raws?
Not for me
Iâm not sure if I understand myself if imma be honest
Maybe pom goes well with carbon fiber
They have a satisfying bottom out feel
Fair
Fast, very stiff and stable feel
ttc pom church
I thought Poms are louder and always have a clacky sound, but they sound better than raws lmao
Original KOM switches are ear splitting loud, POMs are newer and arenât as obnoxious sounding
POMs to me atleast sound more like a supercharged RAW imo
We welcome anyone in search of our lord and savior, oh the cherished pomegranate
Maybe poms are louder in that soundtest because it was lubed like 5 minutes ago, while raws were a bit dry. If you lube both at the same time, raws will be slightly quieter
Bro, I have the receipts
Pics, plus sound
Im not trolling
Bro when did i say you trolling or you lying you good?
They are the best switches ive ever used
Lab u
Someone send me a soundtest and they sound clacky af thats why im sayin i cant believe
Yeah, that doesnt sound as good as his soundtest
Every sound test will be different
Way more clacky
Yeah thats cause cf plate
My case is special
POMs are inherently clacky, same with RAWs and Jade pros but theyâre a tier above them for clack
Employs some anti gravity technology
The raws in my sound test will also sound different than other people
CF just brings it out alot more
I prefer this soundtest, but yea evey soundtest is different
I prefer that clackiness
If youâre looking for âthockâ youâre looking at the wrong switch
Which Plate you use?
This is true
asdasmos
That spacebar sounds like youâre tapping on a stone
both have same plate
Carbon Fiber
carbon fiber
I might change for jade pro space bar but I kinda like it
Another opportunity to shamelessly plug my board
No space bar foam either which may be influencing that sound
Poms are superior switches but because of the price theyre not as popular as raws/jade pros, but the church is growing rapidly
If you tape mod + use a softer plate (FR4 or even PC plate) Pom will be a lot less clacky @solar tundra
#đ§âkeyboard_modding message sound tests are very different depending on a lot of factors, my raws here are gonna sound super different compared to raws in other sound tests from other people with other setups
But then that ruins most of the fun 
I got my raws with tape mod and stock pc plate here
If you compare raw sound for me vs someone using cf plate etc and no tape mod and all
@little glen you have silver gt80 right
Youâll see that pom might not be as clacky here either
Is there any Switch with performance wise like Poms but thocky?
no
No other switches currently with max stability
And thocky limits you to like 2 switches
Anno gray
ah gray
Which ones?
im trying to find real picture of silver gt80
Had to double check my receipt
there are only renders
Lekker V2s and the new raeds HE, but theyâre highly experimental so idk if theyâre any good
Lekker v1 and v2 
raeds arent even thocky, they sound like a membrane
thock doesnt exist
give up
get poms
𫵠đ
Thock was invented by a marketing thinktank
Ppl that want thocky generally want very little sound
My first was looking through a basic telescope at the moon. I have been captivated ever since and may have gotten out of hand đ¸
When i could describe how my WS Dash Switches sound was i would call it "creamy"
Dashes are just OG jades recolored
ik
Jades are clacky switches
They do sound kinda like shit tho
idk the sound was so good, now i got raw hes and they def feel better but more clacky tho
Big poop
Never too far with space 
I have the factory tape mod on
raws are clackier yes
because of open bottom
Yeah but they feel better 100%
Only the great pomegranate until next week when wooting releases their own
Wooting release Poms next Week=
Honestly an 8 layer tape mod and PP/PC plate should make Poms mildly thocky
Wait Wooting is releasing poms?
Yes
Good recolor
These
Now all i need is the price to be good too
Oh i didnt hear about that tho
I like mine sir 
is it a collab?
Yea kinda
Wooting should price them fairly
Did you say ugly?
For this, I will
Iâd be ok with it
Who cares about the color tho
watches on
Purple switch Iâd order 2 sets
Love purple one of the best colors
Also torontokeebman didnât even add aluminum plates
But the design they chose for the kom is just so bad
Get wooting poms and replace stems with your purple poms
What lying clowns
That would be fire
yo wait you be cooking
White housing with purple stem
I ordered lilac purple beastx pro, my main mice are all purple 
- purple Wooting cable
đ¤¤
LET HIM COOK
you are lying
your viper is white
I will trade for your red housing for my white when I get the Wooting Pom. I will have đ Christmas Pom 
This was foretold
I think what will probably happen is that i buy 2 sets to stem swap and then throw the second set in a backup keyboard
whats your backup
Mad60
Win60
Share the pics haha
Just need all black POM plzz
Yessss
The venom thatâs not working atm
Im biased because you know⌠đ¸

You can make the frankenswitches
Ffffff that
I mean all it is is swapping stem between recolors
Bit of extra lubing thats it
Maybe the woot ones even come pre lubed (imagine that)
Lubing is bad enough, Im sticking with these
Totally possible
They must have improved it
doubt, factory lube is probably same (shit)
Let me dream
Even after stem lubing + spring bag lube the sound sounded the same
but they felt better right
Iâd have to try versus the 6 I didnât lube
I noticed a different feel on Jade pros but not really on Pom
You should. I honestly don't think they're bad unlubed.
Theyâre kinda like raws where you donât really notice
I used KoMs for a week or two dry as the sahara
Woot should send us people in keyboard modding chat samples to review (i just want free shit)
I only remember if I was looking for it feeling a bit of a light texture when slowly pressing. Unfortunately I don't have any dry ones left to compare against now.
I just realised again that poms are like a million billion dollars
yes
lol
Yesh.
Lets make an official thread in #1141096226884956181
More worth it than Jade maxes easily

That dog mustâve had alot of microplastics for all PC parts đł
Every time i need foil peeled off my pc parts i just make my dog do it
(I dont have a dog this is a lie)
imagine not having a dog
No thank you
Why tho
Dog confirmed â
Can't deal with your anti-dog energy rn :stern:
(They are a lot, don't get one until you're ready)
Yay, got new keycaps
They would make some unofficial ambassadors
And they are so good once you try them its over
anyone know any switches i can try out that are more of a thonky kinda sound?
There are 95 moons of Jupiter with confirmed orbits as of 5 February 2024. This number does not include a number of meter-sized moonlets thought to be shed from the inner moons, nor hundreds of possible kilometer-sized outer irregular moons that were only briefly captured by telescopes. All together, Jupiter's moons form a satellite system calle...
Fun fact, Jupiter has 95 known moons, that one in the pic is my cursor lol
The moons of Jupiter are fucking awesome
Io, Titan, Ganymede, Ceres, there's so much to discover
As are their names
I use them when naming characters all the time
That or Greek gods
But real talk Jupiter too big someone should do something
I had so much trouble attaching the poles to the housing of for the stabilizers and was wondering if I was doing them wrongly
I am done but my fingers hurt so much trying to get them in
The wires I imagine? The metal bit
Yeah
Just gotta hold everything close to prevent flexing and maybe start lifting
The simulation of what it like if you fall into Jupiter is like straight out of Danteâs inferno
Shit is freaky
Was I suppose to approach from an angle and point upwards before pushing down on the plastic clamp part or
I just go straight in đ¤ˇ
Didnât see that one. Saw the falling into a black hole one somewhat recently and that too was otherworldly
This new, immersive visualization produced on a NASA supercomputer represents a scenario where a camera â a stand-in for a daring astronaut â enters the event horizon, sealing its fate.
Goddard scientists created the visualizations on the Discover supercomputer at the NASA Center for Climate Simulation.
The destination is a supermassive bl...
You plunge into darkness and your backdrop is the strongest lightning storms in the entire universe
Truly what hell would feel like
Support my work on Patreon: https://www.patreon.com/melodysheep | Get the soundtrack: https://bit.ly/2HKl9fi | How's it all gonna end? This experience takes us on a journey to the end of time, trillions of years into the future, to discover what the fate of our planet and our universe may ultimately be.
We start in 2019 and travel expone...
This one hit hard
I think this is it
Realistic simulation of what you would see if you'd fall into the planet Jupiter. This was made using the software Space Engine with a lot of editing and other stuff.
Like & Subscribe if you liked the video !
Thanks for watching !
Music: 'The Encounter' by Scott Buckley
Music Link: https://www.youtube.com/watch?v=GzkXK1GG2Pc
@ScottBuckley
đ if Iâm not back soon Iâm quaking
Too big to fail
What gets me is looking back and thereâs nothing behind you but countless light years away from anything relevant
Makes what we have precious
We are conscious space dust
Made it through the intro asdasmos, very cool, will finish. Just gotta visit Jupiter hell first.
You will be sinking for months
đ
If you even live to that point definitely not
The wildest part is itâs just all gas and itâs all kept together like a majestic oil painting
Pressure does wild stuff
Thatâs the truly weird and scary part of space you get freak shows like that
Yup itâs endlessly fascinating
Thanks but Iâm all set for now
Dying on Earth: seeing the tariff bill
the president adds more
Maybe heâs never had someone make a keyboard for him before
It'll be made in Nasa
Might reconsider exemption 
Toronto keeb ppl still havenât listed alu plate on their website btw
Lying thru their teeth lmao
Nothing you can order from ali express?
Where do others get theirs?
Most with are venom/60HErs or from TKM
ahhh okay
tkm L
@fluid ravine
maybe if torontokeyboardman fuckin puts up alu plate i could try smh
Can you install a raw?
It may help to have the other right after so one can hear the difference
Ttc poms right?
Huh, FR4 sounds pretty similar to CF from memory
Like in mine, I wanted to have one right after so you can directly compare otherwise its based off of subjective memory or other setups
are you on 80he?
Yes, but I just mean Var's vid from today and yesterday on CF
Like the CF plate has alu standoffs
Its rock solid
Maybe that with pom material is a magic mix
anyone with both geon raws and ttc poms?
I dunno, my point is just that you might get a better comparison by having the 2 right after each other
Yes
Mine are as Josh would say tainted 
Spilled too much lube on them?
What would you like to know?
No installed Deng god bottoms and used jade max spring
Iâd have to go really looking to put it back together
Fair enough
thoughts after using them both haha
It looks identical to jade pro bottom
ahh so completely closed bottom
Deng god switches sounded decent (similar to raw stock), but had atrocious stem wobble
Ye
Yep not close
Sound you can argue till the end of time
This is important to me
Super stable, no wobble and the springs have a longer spring so its a nice pop back
Yeah I should listen back to back
can you elaborate on this? because coming from lekker v2 to geon raws i felt the raws were a huge improvement already
If you like clack, POMs are good
Raws have this mushiness and I didnt realize how bad it was until I tried the ttc poms
oh
Not too over the top
Think of the improvement from the lekkers to raws
Then imagine the same shock of how much better the TTs poms are
For example if you shift your keycaps side to side for RAWs and Jade pros youâll have stem wobble
On Poms, itâs stiff
Just get og poms or wooting poms and you are done
On RAWs and pros you can feel the stem wobble move side to side, Poms it barely budges if at all
Trust me
Turing had a wobble test
need is a strong word, but i guess you are a strong man
Well it is highly recommendedâŚ
You could go to a zoo and jump into the crocodile cage and feed them but is it a good idea?
Lmao
if one is coming from RAWs then ofc they cant comprehend lubing their own switches
they've never needed to 
Mine were lubed
I think these magneto poms are my end game
At least for this build
And im gna have this for a while
So I get to watch you guys build yours 
nah i am just sayin :3 but also realistically without lube break in is faster which may help it to become smooth without lube over time? (maybe that is kinda cope, a bit of lube is probably always needed.)
also i heard the sounds fine without lube, mainly is the press feel thats the issue when dry
gud luck btw, seems easy enough
Nothing personal but cope
Which is the whole point IMO
Why have these unnecessary issues on already expensive switches, might as well get what you paid for
Or wait for wootings
âď¸
my philosophy has always been do it once and never have to again (or for X amount of years)
RAWs/Jade pros prob dont really need to, but POMs has got like no lube anywhere
that being said, the experience does feel rather similar stock and lubed but might need some time for it to fully break in idk
you used brush?
for 205g application yeah
interesting. even press feels as smooth before and after?
id have to get my spares out, but I think the lube will be more useful overtime
i love venom
You may be the only one of us that has lubed and unlubed poms for comparison. You gotta do some science for the group.
Iâm currently testing these switch pads. I can confidently say they donât affect the switchâs operation or travel, so theyâre definitely usable.
idk if i could've done them all lmao
I just wanted a break after 25
then had to keep going
usable yes, optimal? Depends
it definitely fenangles with accuracy
It's brutal I know
great trap workout
thackson got his and his firmware was fucked
for the greatest trap exercise
hopefully bro can fix it today
Just update
dont work, they just release a guide for 60he version to reflash the firmware
Tested on Gateron Jade and Lekker V2 45 switchesâno difference at all. I checked with snap tap, rapid trigger, rappy snappy, and so on. Nothing changed.
tbf i am happy, because they made a guide pretty fast
like within 3 days i think. impressive
W
What are you using to measure
how did you test it
i don't think people are quite understanding what folks mean when they say it affects accuracy
By my own feel, in wootility, and I quickly managed to play a couple of games in CS2 and Geometry Dash.
it's not that your keyboard becomes unusable or you have giant changes to it
it's that things like say if you press x key 100 times at 0.1 it might not work 100 times correctly
yeah
or the accuracy may be off at times when pressing repeatedly quickly due to it affecting the calibration
it doesn't mean you can't use them or even that you'll find a giant change in your performance, just that it's actively increasing the inaccuracy of the calibration so it almost certainly will affect your accuracy whether you personally notice it or not
I like that my Wooting turned out pretty quiet; now I want to make it even quieter.
yeah nothing wrong with that - just i wouldn't really go out and tell everyone it has no effect on accuracy without actual tested data (particularly when we know it does affect calibration slightly)
That's a fair point, but also enjoy your build, glad you like it đ
yeah go ahead and do all the mods you want honestly. For personal rig it's your choice if you want to make sacrifices for other gains and if you don't notice it then no issues
I have unlubed ones
They just feel dry and have a snappier sound unlubed imo
Whoever has a few minutes to try them out it might be helpful for all the new members of the POM church
people out here talking about min maxing but no one is willing to sacrifice their ears to tray mount
smh

Salv tray mount? đ
i would 100% tray mount my 80he if it was doable
i don't care about bounce at all
for me i have gaming board for gaming and custom boards for sound/feel, so i've never really worried about trying to min/max sound on the gaming boards
@harsh dove unrelated, but do you think silver GT would be more versatile than its white counterpart for exploring other keycap sets (the white is starting to look more veneer white vs the classic silver metal look)
Yeah I care about how all my boards sound
No poopy boards allowed
Well donât copy me but silver is better

I think you can match more with silver than white
If I wanted to copy you Iâd sub to your twitch 
Bc I kinda like the GMK white alphas with different colored side keys, but dunno what future sets Iâd get if I do
I think white would work fine, but the silver already looks 95% in line with color which is where my doubt started to creep in
Right now, itâs unclear why the key with the Gateron Jade switch is actuating automatically.
Works every other time.
i wish i can sub, i havent used my prime sub in soo long
twitch too much brain rot for my 3 brain cells to handle
Fair
beautiful i just finished my game, thanks for the reminder mark 
Whatcha modding, I'm at school right now so I can't join 
Yoo new switches
what
In short, these pads work great with Lekker 45 switches.
@sacred elm next week Thursday, you heard it here first
Ah so I was close with my mid week prediction đ¤
Iâm ready and waiting. Thank you.
guys anyone can recom a online shop for keycaps in europe ?
Yes that is the POM one
Thanks
Should I just buy them on drop?
Or wait even longer for people to get them and make sure theyâre just as good? Lol
Spring could be diff
Yeah I'd just be patient and wait for mine to come in and I'll tell you
Sounds good
Anyone got some good looking white purple keycaps
yes, they have almost 0 wobble
are they better for comp gaming or its just a feel preference ? (im still new to kb modding)
yea with them you get less deadzone on wooting, doubt its noticeable but still
0.03mm vs 0.15mm
ohh i see ty i currently have geon raw and enjoy them
when i mod my 80he i'll try ttc, thank you shaf
I think they are (Iâve spent about less than 24 hrs with them) and I noticed right away that FPS movement with them was a lot better coming from raws/Jade pros
Crisper movement, it eliminates 98% of all wobble
No youâre not
Iâd believe Shafie is sorry long before you with the copium gif, youâre not fooling me 
what have i done
hmmmh interesting
Just need to work a side hustle @kind helm so you can try them for yourself 
i definitely try them out once i get around to modding it
I know youâre loyal to your goat Geon, but not all change is scary
Bro stopped time and shi
i did grab the jade pro and they are nicc on a thin sounding board like tofu 2.0
Chat is we in JoJo Bizarre Adventure?
i am no joke down to try ttc wooting at some point
(I haven't watch that anime yet)
if the price is not too nutty
how you feel about that little sound test i just did
i think abs really helped it to get that little bit of ump it needed
I'm at school Josh 
Can't listen to it rn sadly
I just wanna go home and touch my keyboard

Pause
i feel like the tofu 2.0 would even be nicer on pom ngl, because how thin sounding the board is, a loud switch would go nutz on it
Sorry Mark 
Shii you may be cookin
Chat should I just say fk it and get my earbuds and join stream 
it is okay, you already missed eric's little story
u guys think the jade ruby will be good?

NOOOO
yea
Yes!
get poms



