#š§ākeyboard_modding
1 messages Ā· Page 513 of 1
I think your enter stability might be backwards
Yet it's not the switch that doesn't work because I've exchanged it with another one that works and it still doesn't work
And I put a trick, a mode with the light that when you press the light comes gradually, its walk does me, but on the pc nothing happens
Ty, So that normal some wire are up and some wire are down?
Thanks 
I just saw it's because there's no assign key, how do I assign a key in wootility
Remap
Nice!
Huh leather as a dampener, how's it sound compared to foam?
Done for now
Is that a stickerbomb mod?
I like the deeper sound profile it gives
I see the tape underneath, fun way to zazz it up and add layers
Yup
Coiled cable wrapped around a bolt, you just made an inductor
Dampener or reflector?
I am curious about the sound of leather as a dampening material tho
For sure
I mean it's more dampening than the case right?
It probably eats a bunch of the case vibrations
It also seems like one of the harder materials to make a dampening layer out of
Thats some shit you wont see sold on ali
I glued it to a rubber sheet for the case ping
I imagine pretty similar to when I used Moleskin
I put moleskin in the bottom of the Frog Mini before
Sure that sounds similar enough
Yeah moleskin fuzzy side up on the bottom of the case is interesting
On top of my kilmat lol
Donāt think that would fit tho. Maybe. But doubtful
I think I have a pic somewhere lol
Worth a Try. I originally was going to go with leather/cork combo but the cork was too thick.
bro had to flex the finalmouseš
lol
Still super happy with how my venom turned out
Looks so good
I wish my 80he looked this good tbh 
Maybe when i have the cosmos on it
fire
a alumazed that i can actually respect 
On looks this thing is done.
And I know how it feels so
you did it
Starting to think torontoman lied to me
He did
probably french canadian
i think the best 80he is cam's gameboy theme one
Tabernach!
that one fcks
š
I dont know if iāve seen that yet
I'm intrigued as wellš
I mean my 80he right now doesnt look that bad either tbh
With the deskmat too, thats cheating
Still thinking do I order gt80 or no 
Also desk looks too clean hey @harsh dove you need to let some dust on your desk so i feel less bad about the state of mine
this one too, cant go wrong with MictlƔn
Itās going in the closet soon to be replaced with gmk cosmos haha
Just need to find the time to tune stabs so i can do both at once
I think iāll build another 60% in leggera or something idk
I need to find a use for these cause they are way too good to not use
aren't people really torn on cosmos?
Yes

But i think if you have some time with it to really take it in and get used to it etc
I was kind of on the fence at first but now i really like it
I have a habit of wiping my desk, monitors, PC, down like everyday
Lets just say i dont have a duster and you can tell
In stock??
I just bought one of those magnetic dusters, clutch af
Ah, yeah I have electric duster and hundred micro fiber cloths
Don't believe his lies
I like this , the silver/grey is clean with the diffuser bar
True
I'm probably going to order white version after getting POMs
Im done with plastic case
that one was announced to send out last march
Can I get GT80 without brass badge AND no strap clip?
You can order without a badge and just unscrew that strap thingie
strap buckle or whatever its called
Gotcha
That has the clip on still no?
Shafie said I could unscrew so
that be neat
and 1 that just kinda goes out from the case
Yeah thatās fine
its pretty clean
lowkey cleaner than both the included pieces
Yea screw this, im getting it
exactly
poms + this = gg
I sold my 60he tho
lol
Think about the compound interest that case will accrue tho
yea
also it comes with long ass jst cable
thats a W
Instead of the buckle I think you can just get a metal tab that is just an accent
oh, wait. actually no clue
buckle and side badge are interchangeable, for the people who don't want the strap
I didnāt see any pics of side badge unless Iām blind
you dont like the ghost? @harsh dove
Lessgooo, benom has arrived to my city's DHL facility
the ones in the middle
Nah I do why
lol
Gotcha
idk i guess stupid way of asking :D. you are going to upgrade the case though?
So it still kinda sticks out
sry for the pings
Yeah
Yeah I might look at this GT80, I have a white zinc already and a frost case too
Leave some cases for the rest of us T_T
whats the biggest difference the sound? xD
the feel
& weight of course
the looks
if they made a PC GT80 or acrylic, my wallet would be gone
yeah i just play games so im not a uber keeb enthusiast not trying to be facetious
Nah youāre good
ive had my 60he+ for a while now and its just still in stock case
but tbh i think it sounds good lol
Enjoy it then, don't let your bank account get drained.
Yeah donāt jump into the rabbit hole
Let us be nerdy about stuff that donāt matter
which color are you thinking Cam?
Silver
love the feel of the keyboard though was thinking of grabbing a zinc case for 80 for typing/work
I like that and white
Im gonna get without a badge
I feel like none is the move
Yeah I feel like none is clean
You gotta at least get one for $3 while you're at it right?
I like this ball catch design
For the side badge I guess yeah
Yea that ball grabbing system is pretty tight
The one part of it compared to the zinc case I really envy
Mark never fails
Edging and Ball Grabbing Systems, Marks specialty
Surely
He's got you wrapped round his finger
wait that's not a finger
My deng gods are coming in tmrw, wtf do I even do with them??? my geon raws are coming Fridayš
Refund them
Apparently Deng God Pros are pretty nice, jade pro copies
I bought deng gods just for them to sit in a container on display
I didnāt even install them
Don't know if I have the motivation to refund aliexpress for 20$
I didnāt
so just return without getting money back?
are they that badš
Ill probably also let them collect dust in some corner ig
W containers

not even a nice container, just still in the bag they came in
what are the blue ones and the purple ones
1 day ill get poms š , my wallet is on hiatus atm though
Kailh Mistrals āSource Seriesā they donāt work with Wooting and purples are the Neo Lavenders
Basically a Jade recolor but Nylon housing iirc
ahhh the kaih ones look weird
even the top housing and the stem look funky
Yooo nylon switch?
No pins is whack tho
Yeah, I couldn't remember if they were but I just looked it up
These do have pins
the Kailhs don't have pins
I loved the raptors for feel and sound
lol gotcha
they have closed bottom
I think Aligner called them closed bottom Raptors iirc lol
brought 10 to get free shipping, me like too, tis not bad
yeah they're not as tight as RAWs or TTC but I liked them when I used them
They have a nice color
One message removed from a suspended account.
You're talking about email?
Foam helped. UwU is now quieter-ish
Also reduced the bottom out distance so its kinda a hardware hack hehe
One message removed from a suspended account.
https://www.rfc-editor.org/rfc/rfc2822#section-3.6.2
The From field is a required element. You can look up how to find the headers on an email for your client.
(or just hit the Reply button)
One message removed from a suspended account.
I see. When I had to return something to them they provided me with an RMA number and a URL to obtain a prepaid shipping label. If they did not provide this to you, or indicate that they would in a follow-up email, sure I guess you can respond and ask.
One message removed from a suspended account.
@harsh dove no context
Yes or No
you got your stuff?
Out for delivery rn
Still in school
Got volleyball practice td so I def should get it once I get home
IT'S DELIVERED
YAYAYYAYAAY
21 days of waiting paid off
LESSSSGOOOOO
always YES
Yes
But sometimes? Sometimes no.
In this case I'll go yes.
your fate for like probably 30min to 1hr depending on what it is
oh easiest yes in my life
I have a mock state test I gotta take tmr
So guess Ima take the time to lube my shit instead of studying HAHAHA
you reviewed already i assume
you on 3rd year or 4th year though, retake it ez
Ima take out my current raws and GMK 80082 and put them on fr4 and build it from there
Then lube the second batch of raws right after
2nd actually 
wat kind of ap test you taking
Am a sophomore in hs
lil bro is genius
Computer science...
It's a mock it's a mock š
Practice test
I didn't have internet yesterday so no study
uh huh
week after week its next week
We got stuffed today
Next week
It could be any day of the week
you faster
Any mod in chat can pin it?
how often do you guys relube your switches (if you do)
We dont
i feel like HE switches in general don't retain the lube qualities as well as mech switches
Except the time we had lekker v1s
? why
They all break in anyways lol
Even mx
Just structural design is different
Yea, i wonder what about the structure itself lends itself to that
the lube still makes contact to the plastic parts
maybe cause there's less surface area with the abscence of the leaf that mech switches have
wym? isn't like 90% of the switch plastic lol, where else would lube go
Usually the point of lube is to make your switches feel smoother
if you lubed within 2 weeks its just lube even out
little of both
mind you, I've no jarring issues, just curious
haha
Let's just say lubing switches mostly based for feel
im considering buying the wooting he 80he but im in search of more of a thocky sound like the gateron oil kings, is it possible to change to a switch like that in the future, get some type of mod or would i need to just get a different keyboard?
i precisely lube one drop on each side of the rail
I do 3 brush strokes for all rails
@fluid ravine I know what lubing is for
my curiosity stems in why the lubing effects seem to wane out faster than mechanical switches
though i legit want to try just dry rail and stem with lubed spring
You see it really doesn't, it's still there as is.
and pray that the dry sides break in
Unless you're line asking why it breaks in quicker

Idk what wane means š
could be this!
just buy TTC and dont lube em then
they come dry
Someone get me a dictionary
gradually disapppear, in the context i used it in
I don't even think they're bad dry š¤·
Ay natural break in period is nice
Let the plastic rub against each other
And create a spark
Then every time you type you will get 5 big booms

Can't have lovin' without some rubbin'
but yea i wonder what about the structure lends itself to break in faster
at least in my subjective experience
Thock is generally not gonna happen with most HE switches (can't speak for other boards) the best you can really get is a lower pitched clack, which IMO don't sound that bad
I think the Jade Pros had the lowest sound signature combined with your usual tape mods, foams, poron plate foam etc
aight so for u personally what keyboard would u recommend i get that is not HE for a more thocky sound? if u dont know thats also fine xd ty for the info
im gonna be starting my uni for programming in 6-7 months so im looking to buy my first like actual good keyboard but sound and feel is really important for me
I don't know off the top, but I do remember milktooth on youtube having some solid recs for switches for whatever sound profile you prefer.
HE is a big bonus but if i cant achieve a good enough sound then i could also just settle for mechanical
who says he cant thock
aight ty i will look into it
an important thing to note is that sound is also determined by the case, plate, foams etc. so try be aware of different configurations!
Type shit
usually poron foams and general dampening mods will cut out higher pitch frequencies @winged bison
ah ok ty i will keep that in mind
hello everyone! Anyone knows if I can change keyboard case without removing the keycaps.
Someone said lower pitched clack
this was the lowest i could go
Yes
Well you have to remove a few for the 60HE
idk if you'd consider that vid I just linked thock, but i liked the sound
I have a 80he
quite a few actully for the tray mount
6 I think?
Anyway, 0 for 80HE. Check the youtube build vid.
Thanks
dont remember, all i remember is really annoying
@winged bison for reference, this was the lowest pitch I could achieve with my configuration
my secret sauce is cotton
would u guys say this is thock or clack or something else
dont tell anyone hehehehe
idk what i'd call this lol
This like a year ago or maybe a year and half
the bottom row š„
thats pretty nice ngl but i still kind of feel its different than the sound im exactly looking for
compare to now
still a really good option tho
rip foam gang
Superrr different
It has that "umph" in the sound profile
Yea, if you search up thock within this server you're going to find a lot of similar answers haha, there's stuff that's CLOSE to it (at least to me)
Like ye I got clack clack
Yo says it shipped by the way 
But that was toned down by a lot
Maybe if you provide a video of what sound you're going for exactly, that could help @winged bison
a lot of people just yapping, i think there is one lady who also made a pretty THOCKY board

More thock in here
haha yapping is a part of a text based channel!
i will try to find it, if i remember correctly it was the rainy 75 with gateron oil kings
we cant all just suck off TTCs and Raws š
See the new people should go back in time and visit the old stuff
They don't know abt the voodoo lekker v1s
My first time trying out this switch... 46 USD for 90 pcs, a little more expensive compared to the Gateron milky yellows (which are only about $16 for 90 pcs), but it's a really smooth switch (the factory lube is thicker than all the switches I've seen).
Thank you for watching, I hope you enjoyed the sound test :) I am currently trying out diff...
i got raws from searching this discord's history
damn this sounds nice haha
yea bro thats what im sayiing hahaha
oil king is really nice, i had a board with that on a ciy gas67 or something
thock city that one was
tbh that sounds poppy rather than thocky
but i cant find any rainy 75s cause im currently living in vienna austria and almost all are sold out and the ones that are available are like 190 euros which is insane
Agreed
I thought they were long pole switches for a moment
yea idk im not too sure with the terms i just started to dive into the custom keybhoard world like a month ago
the terms are ass anyway dw about it
LOL
frankly, most of the appeal in the wooting models is the functionality in gaming, if you are getting a keyboard for the programming/school there's bound to be a lot more options
itās fine itās mostly subjective opinions lol
Honestly I'm just a hater but..
It sounds like too much foam 
I don't like it personally
dare i say i want to try alu plate with foam
Oh lawd
i havent tried foam with stiff plate
I can't wait to go home ughhhhhhhhhhh
Silicone and cf on my raws made it sound thin
he touches grass and play volley ball man
the good times
In le 10th grade
im still gonna be gaming alot too, its just that im also gonna be using it alot for programming/school so yea the HE would just be a big plus for me in gaming, but its also really convienient buying the 80he for me because its gonna be prebuilt and i can like order it today u know what i mean
touching grass is over rated, touching switches is where it's at
i found the switches im looking for i just cant find a good enough keyboard option and im so tired of searching for one im at my wits end ahahahha
ooooo i see
tbh tho if you want that poppy sound profile i think a PP plate would be good rather than a PC plate
Fwiw, I was in search of thock and found more appreciation for other sound signatures
i think a lot of us were tbh
lol
and theoretically maybe in 1-2 years with technology evolving they might make more switches for HE thats gonna be more of the sound profile im looking for
wooting doesnāt sell a PP plate but you can get one cut out for yourself
i have no idea what that is but i will look into it for sure then
This is da way
PP or POM
most keyboard enthusiasts prefer PP over POM lately
not too hopeful because the reason why things sound more clacky on he is because of the magnet there
hes doing it
lmao what is that "pls do not delete it ! (new)"
Both compared to PC, they got this interesting popiness sound signature
LOOOL
Oh lawd!
tbf most he switches have the same materials for their switches. itās always nylon bottom, pc top, pom stem
DB
Its a Duaghter board instead of a Daughter board
PP plate 
dead or clean
you just dont hear the top out that good. its still nice
I can't hear the bottom out brah šššššš
you want things to be alive young man, try steel plate
Hopper loves his PP
Bro ascended into heaven



PP too expensive for me rn, otherwise i want to try pp with a closed bottom switch(not raw) on salv
jade pro with alu on salv way too loud for me
raw is just right
Yup that's Pops 
you can get a plate cut out for like 30 bucks no?
and calder
where though
are you in US or canada
one sec
time to get to work
dmed
poor af right now
PP 
Damn Hopper
Didn't know u were chill like that
tf
I should go do back day today so it frees up TTC lube day 
I be broke like that
I'm doing High Impact today so I'm free to limp around tomorrow T_T
And yeah you need that back pristine if you're hitting the brush
My back and shoulders is carrying me so I should be Gucci
JFC you juicing?
If you saw my college numbers youād think I was
I hit 3 plates + change back then
And I did pull-ups + 45 lb weight attached
jesus christ
Iām just a workout adrenaline junkie 
you do sports?
1 year of football/wrestling at 180 lbs, but my best was at 230 lbs
Also 6ā4 fwiw
holy fck there is a stone plate out there
Or stem swapped raptors
Clean
I also have the worlds flattest feet, so my life in sports was never going to be long lived
Is there a sound test
idk i found the plate material randomly. didnt even know that is a thing
as an athelete with flat feet, i fucking FEEL this lol
I have flat feet and did soccer for 6 years
my plantar fasciitis gives out before my lungs do
yeah futball
I got a shepherds fracture in my left ankle and the same shit wouldāve happened again in right so I ended up having more fun working out than actually playing š¤£
what's that?
I played football too, broke my pinky once lol
oh fuck that
sounds painful lol
11/10 pain, only thing that topped it for me was removing my tonsils as an adult
or mad inconvenient
mine was retrolisthesis, i legit felt paralyzed
gained 30-40 lbs
not in a good way
all went to my belly and chin lmao

That shit is pain incarnate
my brother in pain š¤
yea the sport I do requires a lot of rotation erratically so it's quite easy to injure yourself like that
but now I have De Quervain's as of last week, so my dominant hand's thumb is rendered useless for now lmao
life does not want me to be active
Oh hell nah
Yall be hurtin yourselves too much
My shit was like 12 years ago cam
I swear that one came outta nowhere
Ah okay okay
Iām still moderately young 
I'm a lifelong boxer so injuries are bound to happen
True
deffo aged me faster tho š„²
I wanna do some more combat sports again, haven't done anything since school
who not to pick a fight with
I just lift cause I like being able to pick up heavy things and smaller people.
You better leave them small people alone
In a good way!
I want to be picked up so bad but ain't many people out there that can fulfill that wish.
looool it's not like that, i find thrill in high stakes, fast paced adrenaline activities
i am not prone to violence hahaha
go walk around the hood or somethin idk
Not that way šØ
time to enroll in some grappling classes š
like BJJ
if you haven't already
I think I may be past picking up that kinda stuff man, much fun as it may be
Creeping up on that "you're gonna fucking hurt yourself" age
i feel that...
I'd rather just hurt myself in games with no actual physical tax lmao
If you have a large frame then it acts as natural deterrence 
Fighting people for having the wrong switch choices in the modding channel is fair easier anyway
GIFs you can hear
nah i never expected mike to sound the way he sound
no disrespect to the man of course, i am just a nerd
real and true
Just heard the man's voice my whole life, I know that lisp like the back of the ear he bit off
King in the ring for sure.
On this stream, I tried out a new plate sample from https://cbbplanet.com/, made out of composite stone! A material that seems about as sturdy as carbon fiber or aluminum, but has flexibility more akin to FR4 or a soft material in between (not quite like plastic, though). An interesting new option nonetheless. It sounds crisp, too!
Keyboard spec...
@flat cobalt did you notice any difference between FR4 and your Alu plate
https://www.youtube.com/watch?v=Ndmoi1s0ZaY @harsh dove
Check out the new Thermal Grizzly Duronaut:
https://www.thermal-grizzly.com/en/duronaut/s-tg-d-002
Music / Credits:
Outro:
1998 Beats - Strange Things
Paid content in this video:
- Thermal Grizzly Spot
Samples used in this vid...

Yeah I seen, that whole cable spec is dumb lol
anyone actually do this? https://help.wooting.io/article/210-fix-right-side-of-60he-not-working
Symptoms Your 60HE may be stuck in restore mode after a successful flash, or you may be experiencing phantom inputs for the keys handled by the multiplexer in c
im getting Phantom A press down
you got a 5090?

Guys, im getting my 80he soon (hopefully) and i can't decide which switches. Geon Raws, Rice Pudding or Jade Max. Any tips?
Out of those 3 easily RAWs
||ttc poms||
Jade max have terrible issues, would not buy.
If you want another Jade, the Jade Pro's are good. They're a bit deeper than the Geon Raw's, which are a bit higher pitch
I donāt have my tiger lite gaming in yet to try but Iāll put it in a cheap board just so we can hear how it sounds in a case
hey guys I'm getting an acrylic case for my wooting 60HE and I just cant find any decent looking like maybe jelly white or just any white type of keycaps that have nice shine through like Xray maybe...any tips
Hard to tell with the desk wood audio
Put it in your 80he
i sold it lul
uhhh its a little difficult since its silicone
the feeling of soft, without the mush at the bottom
you sold 80he and got the tiget lite gaming with venom tkl?
you guys are gonna love these if u picking these up
nice
now i kinda want to try
fck
3.5mm bottom out, so youre not gonna be hearing the magnet hit ur pcb which was my concern at first
just some nice thocks
Hmmmmmm
So transfer ownership
yup already done that ofc
It was a very subtle light difference, now was it in my head or irl idk
That decides it then, Iām going to edge Toronto man with my business they not getting it now
anyone remembers what is the type of conductive pad used by optimum case?
adhesive conductive foam/pads
is there a specific orientation for it?
i assume the adhesive side is not conductive?
it is
ah alright
donāt think so
you can get strips off of ali as well
and just cut them to size
so just tape it onto the case and make sure it contacts with the pcb's usb-c port and we chilling?
So why you have role
scratch the paint/anodized layer off a bit
thatās what turing did and tested to work.
of most adhesive conductive foams it is, it says so in the description as well
bro has multimeter at home?!
idk you gotta ask a mod lol
rahhhhhhhhhhhhhhhhhh
you like em already?
thanks man ā¤ļø
love them, havent even mounted them yet
I wanna try em so bad too but fucking oblo died
bro said he was gonna list em two weeks ago now
š
has anyone found a way to get a stepped caps lock to fit onto the wooting
or will I just have to mod it per key
š
IMO they look so much better and it's a shame it only works on certain PCBs
rubber dome on alu yee or nah
i dont have a good plate for it
fuck
i want to do a plastic case + plastic plate + rubber dome build
THOCK
mr willyum's tkl build is gonna be sick af
this was a wild ride to read
sry i saw beautiful falling snow outside i took it as a sign from god to start drinking
i got mine from omnitype, cannonkeys should be stocked sooner or later
hes eu xD
ā¹ļø
imma get some even though i dont have a board for it
just it being the first rubber dome he switch i want to grab some
Depending on how much the offset is of stepped compared to normal, perhaps a switch would still be functional when offset
I donāt think wootās calibration would work well though
hm
if it messes with calibration then i'm probs not gonna do it
unless you're talking about for that key in particular
for that key in particular
oh yea that won't matter
could be interesting
as long as it registers a general key press i'm good haha
wooting's calibration is key particular?
did u mean moving where the switch is on the pcb btw
but youād need a custom plate and a switch without mounting pins
per key, yes
that means mixing switches in the same board would work, nice
I mean if you just had a stepped caps plate (offset) while using a normal PCB
the magnet would be slightly offset compared to the sensor but it might still function well
š¤š¤
Itās cool, I like stepped more as well
it probably would because every damn time my bluetooth earbud charger go near my board it starts to go crazy
yeah I think it would as well. The SayoDevice works when the switches are offset by 5mm or so
I think stepped caps would be similar
imagine a plate with stepped cap compatiblity. literally just wider hole for that one switch
well, because the mounting pins holes donāt align, itād have to be a switch without mounting pins. which means if the hole is wider, the key can slide š¤£
but ye, a wider hole is all youād need to test it out
;)
geon time
nah bro watch out that keyboard is shit cuz no 4 year warranty 
return it
IT'S BENOMMM TIMEEE
LMA9
i bought the Wooting 60HE prebuilt and have done the following modifications:
-Alumaze 60 Just White Case + foam
-Friction Fit Pad
-PC Plate
-Gateron Jade Pro Switches Lubed with Krytox 205g0
-4 layers Painters Tape Mod
-Gateron Screw-In Stabilizers Lubed with Krytox 205g0
-Band-Aid Mod
-Wooting Double Shot Backlit White Key Caps
-Adhesive Puddy on underside of space bar key cap
My question is if there is anything I have overlooked or missed in order to make it any more thockier or silent in any capacity, the only one i can think of is ceramic keycaps, if anyone has anything constructive to add, please do so, would much appreciate it šš¼
Not really much you can do there besides ceramic keycaps (which I donāt recommend generally). You could try out different switches to if thereās one you prefer better though, if youāre still using lekkers that is
iām running gateron jade pros and i have lubed them myself with krytox
Oh then I wouldnāt change anything really
ok thank you!
Maybe try polyfill instead of foam
apparently it makes kb sound a bit deeper
poly fill to replace the bottom foam?
Yes instead of case foam
ok i will check it out thank you
are you doing a wooting pcb swap mod or you waiting for leggera first
Ah nothing like a fresh layer of snow to wake you up in the morning
beautiful
pe foam sheet and poron plate foam on top of the pcb can help make it deeper as well
is it worth lubing raw he switches or are they good factory
its good factory
pe foam sheet for the base foam?
i already tried poron foam for the plate, the friction fit pad sounds deeper for me
alr alr
also
if I am looking for a poppy profile do I buy a pom plate or an fr4
no over the pcb
doesnt pe foam sheet mess with actuation
tofu 60 redux
@violet fulcrum looking forward to hearing it mounted up
with brass
never tried pom, but fr4 is nice with tofu
ah alright
alr bet
#1308938534224138270 message old built i had with fr4 and tofu redux
pom i would expect the board to sound deeper than this
that actually slaps
wtf
yea i do think pp would be poppier than pom
whats pp
polypropylene
polypropylene
you probably gotta get one cut
that sounds complicated
is it that big of a difference to pom
yeah
not really you just send the plate file to a person who will cnc the plate for you
can get one from hypekeebs
aswell as smkkeyboards
iirc
if u dont wanna send files
alr I will check it
a lot of kb enthusiasts prefer PP over POM bc it's so poppy
wheres smkkeyboard from?
if you're from the US dont buy from hypekeyboards
im from ireland
oh then he works perfect for you
why so
my fault
ty for the website tho
rly cool that things like this exist
there's shipping problems between the US and Canada atm
oh.
trade war
;/
how do I get the file for wooting btw
cuz on their list
I click it and kinda nothing happens
idk whyh
i'm pretty sure he should have the wooting plate
it does
but nothing pops up
that's weird
join his discord he's pretty good at communicating
Please add as much as information as possible when requesting edits.Ā Example: "Remove spacebar cutouts on both sides, keep more material as possible", "Remove screw holes", etc. Please choose the stabilizer cutout accordingly. Ā Screw-in Stabilizers Its highly recommended to use theĀ screw-in option cutout if you have
wait thats actually genius
ur a goat
it's so unfortunate there's shipment problems between canada and the US
tom is the goat
nah ur goated too you helping me out hella because I have no idea what I am doing
also what is the difference between screw in stabs and plate mount stabs
which si better
screw ins are better but make sure your pcb supports screw ins
if you bought your 60HE recently then they should
I bought it a year ago
just make sure itās the 60HE+ module
im so geeked i just ordered mine
nah its the old ojne
then plate mount stabs
alr alr gotchu
for the case do I just choose stock
since its the same really
ye
idk why I would need a specific cut out for the tofu
when the stock one works fine
iām not too sure abt that tbh, i thought heād just cut out the plate for you
he does
but it asks to select a case for the cut outr
ig just specify which case you have
but that makes me pay extra even tho it basically is the same as tofu
alr gotchu
choose standard
if its a traditional gh60 case
what case are u planning to use
I currently have tofu
and will continue using tofu
then choose standard
gotchu
switches?
geon raw he 60g
its beautiful
u got any mods on it or
I have tape and thats rly it
i think that build was a frog mini case with 80a tadpoles and no tadpoles near spacebar points
other than that its just raws + gmk + pp
what on earth is a tadpole
something speicifc to the case he has, pretty special stuff
something i wish i brought
top mount esque
but instead of screws its with these sillicone "tadpoles"
hmmmm alr alr
so I dont gotta worry about that then gothcu
bruh no way
this is a a tadpole
well I see why they are called tadpoles
I need yall to be so fr is it worth paying 30 shipping for this dawg
like this has to come and make my jaw drop
do you plan to get the raed?
AEboards Raed HE switches sound test
those switches look so funky
@polar girder i feel like this is your stuff
any foam in there?
down the line
i assume bump isnt that strong
just plate
bro just let his cable drop off the table in the middle
Does anyone create cases for the Two HE?
very noticeable bump at the top but it smoothens through out
topre domes with HE
oh
no mush feel
lads I have my hand up I have a question right,what is like the sound profile of a fr4 plate vs pp
Fk now I want to try

How do they feel
pp should be deeper and poppier, fr4 is more like a middle ground in terms of sound
FR4 is going to be equal parts clacky/'thocky', havent tried PP, but PC just made everything super muted and PP is softer than that
pp is livelier than pc yea
alr alr ty ty yall
PP = poppy?
Never heard that one
that's just from what i've heard, seems like everyone says pp is poppier
Yeah idk about that
nice round bump, soft but not mushy bottom out
bigsly has pp
Have you tried pp?
Ok curious
i havent but ive asked around and everyone says how poppy PP is
the board sounds a little muted to me
Yeah thatās mostly switches
which ig isnt necessarily a bad thing
Rubber dome
yep it has a silencing ring for the top out
Rather than plastic slapping against each other
You add that or stock?
comes stock
is pp good for a poppy profile or would u reccomend something else
.5mm poron ring
Or alu
alr alr gotchu
Thatās wild. You try without it?
I heard alot about fr4 ,something like this one https://www.aliexpress.us/item/1005006050178592.html?gatewayAdapt=4itemAdapt
yea just stick with pp probably, alu and cf are more clacky than poppy and they're more expensive
fair fair
not yet but judging by the height of the slider, i dont think it will hit the top without rings unless u hit it fast
thats for another day to try
Makes sense
Am I just not understand āpoppyā
these already my favorite right up there with geon raw
i mean sound is subjective
Preference is subjective. Sound is not.
ok
I would say sound waves are pretty objective.
ok
ok
ok
lol thanks, chief
anytime i've said pp i meant the material lol
Iāve never never heard or thought PP sounds poppy
i do
But to each their own
especially compared to the other plastics like pc or pom
Yeah I think of the bubble pop sound you make with your mouth
Very minimal wobble
woww
Sound test?
Raed HE switches 45g on womier M68. Will be doing another test on my tiger lite when it arrives :)
i'm not sure if i like the sound of topre boards
i think it's the downstroke that im not into
it just sounds kinda mushy and muted, at least to my ears. im sure it doesnt feel mushy
New build but the TOFU is so heavy and Iām actually considering sending it back š
Tofu is light
3kg+ is heavy build
Hearing this makes me smile
I guess thereās a new silent he switch that can be recommended. Seems quite quiet
tHockY He tOPRE rUbbEr DomeH
Just feels so much heavier to me as itās the most extensively I have modded a board. Used to my original gh60 case which was very light but I love the colour of the tofu. I think it could be the feet too as theyāre dragging so I might take them off??? But I donāt know
I have 2.5kg build and it is light
yeah though they arent deadsilent like the silent pheonix, i kinda like it that way
Now we have to hear them in wooting
speaking of the tofu, I already own a tofu60 (the dz60RGB model) not really sure what version this is because the product page is gone as it's a 4+ year old product but are the wooting 60he and this tofu60 version compatible, is it just safe to assume that any tofu60 (non redux) works?
I know that the non-redux model is harder to use because you have to line up the usb-c
not the 2.0
thats fair, im just new to heavier / more premium builds i guess
if you wanted more thock or volume out of these, i recommend to not use plate foam or case dampening
Iām not personally after quiet switches but it seems to come up pretty often
what plate btw
alu









