🔧│keyboard_modding

[kind helm]

for me,
jade pro + cf combo is clean crispy clack
raw + alu combo is full lively, a lot of things going on

[sacred elm]

Josh do you have fr4

[kind helm]

yee i started with that actually

that is what i had on my salvation long time ago with wooting

[sacred elm]

Do you like jade pros on fr4 btw?

[kind helm]

never tried with jade pro

after i tried cf though i dont really see a point with fr4 (maybe also depends on the case)

i feel like cf is basically how fr4 feels but a bit more intense

i kinda think of the plates like alu = loud with sharp bottom out + deep top out, cf = loud with sharp bottom out and top out, pc = muted top out

fr is like cf but not as loud relatively quiet on both

i did enjoy fr4 with raw though, there is a old sound test in wootstation i did.

[flat cobalt]

I hate PC

[sacred elm]

pc

https://tenor.com/view/angry-thiago-mad-angry-fist-emoji-gif-17761307

[flat cobalt]

What did you end up ordering for your plate in the end?

[kind helm]

https://youtu.be/NLd2YK7Huew?feature=shared this video that mj sent me is much better than that pic

[sacred elm]

both

[knotty iron]

would polypropylene be below PC

[gleaming crane]

Anyone know where I can get different plate materials that’s compatible with the wooting

[sacred elm]

aliexpress

kbdfans store or keyboard fun store

[kind helm]

kbdfan store if you are on 60he

[gleaming crane]

Okay thx guys

[flat cobalt]

FR and CF?

[sacred elm]

Yea

[flat cobalt]

I was looking at the Aluminum plate maybe just for fun

[sacred elm]

i havent seen alu plate for 80he

kbdfans told me they might release it tho

with brass

too

[flat cobalt]

Toronto Keyboardman sells it

[sacred elm]

😳

alu is interesting

might get it in future

[flat cobalt]

I ordered the foam kit just to have the black poron foam

Because that silicone ain’t it

Needs to be all black

[sacred elm]

you cant even see it

lol

[flat cobalt]

I know it’s there

[sacred elm]

did you put switches in yet or no

[flat cobalt]

Not yet, I had to work an 18 hour shift yesterday and just got home and went straight to bed cause I had work 5 hours later

[chilly mural]

waow

[glacial wind]

that's a lot of flex cuts

[flat cobalt]

I wish I could see a picture of the aluminum plate

[sacred elm]

ah its same manufacturer as ali plates

but with flex cuts

https://tenor.com/view/marflrt-gif-22495409

[flat cobalt]

What that

[sacred elm]

these

[flat cobalt]

I like those

They look cool

[kind helm]

still not flexing anyway since the screws secure the plate to the pcb

how come?

[flat cobalt]

hmmmmmmmm debating so hard on the Alu plate

I ordered it

[sacred elm]

no cf?

[flat cobalt]

I feel like that would be too bright for my taste

[sacred elm]

alu will be nice

[dull sequoia]

Since my attempts with TX AP failed: Does anyone know any working stabilizers for my Wooting Lekker Edition with the Lekker Keycaps? TX AP had issues with the keys only lifting maybe 50% of the way. Long pole prefered.

[proven wadi]

i liked tainted raw he + alu + tofu 2.0 + pbt the best from ur videos :p

[kind helm]

does it slow down and eventually stop going upwards or what?

[dull sequoia]

Yes

[kind helm]

were you able to lift it up manually with a small amount of force?

[dull sequoia]

Someone here said it might be related to the keycaps

Yes

[kind helm]

and you lubed them yourself, right?

[dull sequoia]

It was eben enough to turn the keyboard upside down

Even

I sliiiiightly applied lube, but barely any

No grease

[kind helm]

you can see from the side of the keyboard if your key cap is sit properly

if it is not sit properly then the one that is messed up should be slightly taller than everything else on the same row

[dull sequoia]

Well sadly I put the original stabs in by now. Will probably have to take the time and put them back in again to test what the actual reason is

[kind helm]

if it is sit properly, then most likely you overlubed. I personally would just spam it a couple times then it should be fine.

If it kinda stuck at the bottom, that most likely means that you have lube stick to the pcb, then you just wipe the lube and put the stab back on you would be fine

[dull sequoia]

I was hoping someone tested some other stabs with the Lekker Edition

There was no lube on the PCB

It doesnt lift up higher then maybe 50% and if I turn the keyboard upside down it worked. So it does not get stuck heavily

[kind helm]

It would be easier to tell with a picture, but if you got things to do you can just take a picture and ask in another time

this is pretty common issue

[dull sequoia]

Hm overlubing I doubt. But I will try again with an unlubed pair

[kind helm]

you dont have to buy extra if you dont have them already, even stock stabilizers are fine, it is just tuning it takes a bit of time.

[dull sequoia]

I had a slightly overlubed knight V2 recently and that felt differently. Slightly mushy.

I only lubed two stabs. I wanted to test them first

I tuned the stock ones. They are okay, just a slight rattle. Probably due to a very slight bend. But I wanted to try others and I was too lazy to straighten the wires of the stock ones

[kind helm]

bend is fine, i dont think it is possible to really straighten it without tools. as long as the two ends can sit on a surface evenly. the bend doesn't matter

[uneven thunder]

I know it’s hard to make the wooting thocky but what plate and switches would make my wooting thocky?

Well as close to thocky as possible

[kind helm]

#🔧│keyboard_modding message

thock or nah

[dull sequoia]

The bend causes a slight rattle when you repeatedly and slightly touch one side of the keycap. Yes I am a perfectionist sadly

[uneven thunder]

That sounds really nice

What plate and switches do you have?

[kind helm]

As long as the two ends can sit on a surface evenly, there should be minimal to no rattle. Which ever stab you buy would most likely have a side that works better(aka sit more evenly)

[kind helm]

pc plate, raw he switch, tofu redux, cotton underneath pcb, gummy oring friction mount, and poron foam between plate and pcb

I should make that thing again and sell it.

[low flame]

Beat stabilizers for the 60he?

[high sphinx]

Hey guys what do they exactly mean with this ?

Cause as far as i know the daugtherboard is located at the spacebar with the venom 60he and it does not have arrow keys

[kind helm]

probably copy and paste from tkl version

[high sphinx]

Oh ok ty but i dont have to remove anything right only the yellow tape on the standoffs ?

[kind helm]

i dont even see the yellow tape they talk about

[high sphinx]

Oh cause in some building videos i saw there was some yellow thingy in the standoffs

[kind helm]

picture from the shipping company

the one i got from geon looks the same

[high sphinx]

That yeloow tape

[high sphinx]

I do have to remove that right ?

[kind helm]

that is a standoff my brother

[calm pulsar]

yes, cause you have to screw the plate on anyways

[kind helm]

am i blind, i didn't remove anything

[high sphinx]

Yes i know that is what i am saying right you have to remove that yellow tape

[calm pulsar]

mine came with little tape on standoffs

[high sphinx]

But u dont have to remove the daughterboard right ?

[kind helm]

both pcb i got don't have the tape, so idk

[high sphinx]

Cause here stands to remove it

[calm pulsar]

unless you need it you dont need to remove it

[kind helm]

yo also you may not need to remove the left port

[calm pulsar]

oh tbh never seen that, but also never had issues with using mine

[kind helm]

#🔧│keyboard_modding message For tofu 2.0 there is this little space on there, i think if you get a new case you should check

[high sphinx]

Oh ok cause i got the tofu case so i wil just let it be then but i also wanna know how i can change the daughterboard from position for maybe in the future is there a tutorial somewhere ?

[calm pulsar]

I guess it depends if theres space in the case

[kind helm]

yea

i almost removed it without checking

[calm pulsar]

what you you mean by change the daughterboard from position

[kind helm]

if the case needs to make use of the daughter board, it would have a space for you to screw it in

[high sphinx]

Yeah cause you said unless you need it you dint have you remove it but what if u need it do i have to remove it then ?

[high sphinx]

Oh ok ty

[kind helm]

I just used my hand to wiggle it out. but honestly using a tool would probably be less scary

I am a wild man

[high sphinx]

Do you maybe have a picture of the connection with the jst cable so i can see and get a better pucture of it ? By any chance or do you know a tutorial somewhere that shows it i am really curious

[kind helm]

there is a stream where geon used the daughterboard for leggra I think

but it is the same with any board that uses the daughterboard

[high sphinx]

Oh ok ty i will check ot out then

[kind helm]

just plug in both ends of the cable and it just works

@calm pulsar sir may I hear your spacebar, i wanna see if gmk caps really improves it

my spacebars echo like there is no tomorrow

[tawdry tree]

Yes, it’s because of the thickness of the keycaps in combination with the “prongs” of TX’s plate mounts.

[calm pulsar]

https://media.discordapp.net/attachments/984799440072220692/1319564328994734100/IMG_7095.mov?ex=67821b0c&is=6780c98c&hm=df283fbfe50b839b2841cc351f3f4d64fbb6f67358f5288d35c7e82fbf26d669&

[tawdry tree]

You could cut them slightly. Not sure how easy that would be but it’s a solution.

[kind helm]

tf? really?

[tawdry tree]

Yeah. Thackson explained it. It happened to him too.

[kind helm]

alright mb then. never expected that can happen.

i have tx plate mount but i dont have wooting's key caps

[tawdry tree]

It’s fine. It’s a pretty odd issue that shouldn’t really exist.

[kind helm]

wooting being wooting again

[tawdry tree]

Wooting’s Lekker Edition keycaps are thick..

[kind helm]

honestly at that point, just use stock stab and tune it would be the best solution without damaging anything

cutting sounds scary

[kind helm]

Imma look for gmk spacebar. I remember they do sell that (hopefully), i dont wanna give up my pbt sets :3

[tawdry tree]

Yeah but he wants long poles I think. Not really sure why though.

[kind helm]

geon spacer is 3 dolla

[tawdry tree]

Without shipping, yeah. 🥲

[kind helm]

nah this shit ain real

[calm pulsar]

maybe try some spacebar foam? just dont overdo it and maybe it helps

[kind helm]

spacebar costs 24 dolla?

[calm pulsar]

care cause they might have sizes that are not conventional

[calm pulsar]

they include 6u spacebars and such in those

for weird layouts

also small ones

[kind helm]

what i used to do is pop some foam wrapped with tape. but I am trying to avoid janky mods

gotta be perfect!

[kind helm]

still better than cutting thing though imo

[kind helm]

yee but mmaaaannnnn

[dull sequoia]

Thanks for the clarification. 🙂 Well it is what it is I guess

[tawdry tree]

Probably, yeah. I don’t think it’d be hard to cut though, with some wire cutters.

[kind helm]

it doesn't even have any sort of pattern, literally just thick boi plastic

[high sphinx]

Found it and i saw it ty 😜

[kind helm]

np

[kind helm]

my bad

[kind helm]

i mean if you fck up then its just fcked no?

my hands be shaking holding that cutter

[tawdry tree]

Nah, it’s just those prongs.

They don’t matter much.

These.

Guides, not prongs.

[split dagger]

Whats your guys fav keycaps idk what to choose for my 60he because im revamping it

[ionic breach]

preference

but mine rn im hyped for the thundergod

[split dagger]

Yea fair just curious bc maybe seeing others favs would help me find one

[ionic breach]

u got a theme or colour choice?

[kind helm]

how thick are those cap

holy fck

that is fat

[split dagger]

Not specifically I have a black tofu60 redux for my wooting but idk if I wanna get a diff one and try a new color bc I have always used black

Im debating maybe a purple theme

[tawdry tree]

They touch only at bottom out, or close to it. But yeah, they’re thick.

[split dagger]

Oh yea those are really nice

[sacred elm]

these are nice, they are on sale frequently for like 35-40$

[sacred elm]

https://shop.wuquestudio.com/products/in-stock-ws-pbt-wob-keycaps

[ionic breach]

a few people here got this

[kind helm]

look at that space

[tawdry tree]

Exactly.

[tawdry tree]

😂😂 yeah..

[split dagger]

Yea there the same as the ones on my custom board

[split dagger]

I kinda wanna go for like a dark purple theme

[kind helm]

i am lost af 😂

[split dagger]

But those might work actually

[tawdry tree]

It’s to do with the angle too probably.

[ionic breach]

synthblaze neo and blood night i like

[split dagger]

A purple preferably the same color ish to match the case

[split dagger]

Ima look it up

[ionic breach]

but blood night is a bit iffy right now with its production

[kind helm]

yeee idk, i kinda want to see what that key cap's bottom look like now

its gonna be like double of that width at least

[tawdry tree]

@dull sequoia if you don’t mind. I’m curious too.

[rapid moth]

Anyone know if any other company has a custom 80he case in the pipeline? One that actually sells units to EU retailers

[tawdry tree]

Apart from the GT-80 and Bone80? Not that I know of.

[kind helm]

#🔧│keyboard_modding message
nicepbt from canonkey has some nice looking caps imo

[rapid moth]

Only heard of gt-80 so far. Gonna see what the bone is about, ty

[kind helm]

the two little wheat on 2 ctrl keys are so gud

[dull sequoia]

You mean this? It has tape on it but it is NOT the tape, I checked with the additional spacebar that came with the Lekker Edition without tape.

[tawdry tree]

On AliExpress, it’s a little cheaper than the GT-80 but pretty similar overall.

[tawdry tree]

It definitely is thick but I don’t think it’s because of the thickness actually. Maybe those guides are long and hit the (idk wtf it’s called).

[tawdry tree]

That?

[kind helm]

for comparison

[tawdry tree]

Yeah, I think that’s it.

[dull sequoia]

Maybe. Should have tried with a different space bar, e.g. from my 60he

[tawdry tree]

This design is pretty wild. Those “lines” are exactly where the guides would sit.

[tawdry tree]

This is design wouldn’t have that problem.

[kind helm]

think you right

[tawdry tree]

We might be onto something! 🧐

[tawdry tree]

It’s pretty funny how thick the keycap walls would have to be for it to cause problems.

[kind helm]

i think the tape mustve caught onto the "guide" as well, this should explain why it was moving slowly instead of being just stuck

[tawdry tree]

Could be, yeah!

I do think the guides on TX’s plate mounts are longer than normal as well.

[kind helm]

fck you want me to look for another stab?

give me a moment

[tawdry tree]

😂😂

[kind helm]

this is owlab v2

no "guide"

so tx ap be special as well

😂

[tawdry tree]

I think the guides are longer than normal because the switch’s top housing doesn’t hit those lines.

[kind helm]

alright give me a sec

this set has guide

this set is brandnew too

[tawdry tree]

Why do you have multiple plate mounts?! 😂

[kind helm]

i have problems okay

dont judge

[dull sequoia]

I just checked, the stock ones are the same length and thickness

Also the TX do not hit the structure

[tawdry tree]

I can’t judge but damn.

[tawdry tree]

Hmmmmmmmmm.

TX neither hits the side walls nor the lines/structure?

[kind helm]

lighting kinda bad but think same thickness

[tawdry tree]

Same length?

[tawdry tree]

The guides?

[kind helm]

yea that is waht i was talking bout

[tawdry tree]

LOL

[dull sequoia]

Yes

That is what I see as well

[tawdry tree]

IT LOOKS LIKE EVERYTHING IS HITTING EVERYTHING

😂😂😭😭

[kind helm]

LMFAO

[dull sequoia]

The bottom is not hit but the sides, that is what I was about to write

[tawdry tree]

If you just move the stab housing up and down now, do you not feel any friction?

[tawdry tree]

That’s funny and really odd.

[dull sequoia]

No totally smooth

[tawdry tree]

Yeah but it probably is the side thing then.

[dull sequoia]

Ah no

Wait

It is not touching the sides when installed

See the stem

[kind helm]

it does go all the way down though?

or i am tripping once more

[dull sequoia]

It is currently raised above the case, which would not happen when installed right?

[dull sequoia]

Housing sorry

[tawdry tree]

Raised above the housing, as in when it’s extended?

[kind helm]

this is raised

[tawdry tree]

Yes.^

[tawdry tree]

This is bottomed out.

[tawdry tree]

It can go a bit further right?

The stem bottoms out on the PCB.

[kind helm]

nope that is all the way down for me

[tawdry tree]

Interesting. With TX’s it bottoms out on the PCB iirc.

[dull sequoia]

I meant raised above the housing.

[kind helm]

oh you mean the bottom

[dull sequoia]

Yes 😉

[kind helm]

yea that should happen a little bit, not as much as what you have there

[tawdry tree]

YES. It bottoms out on the PCB. Maybe that’s the issue.

[dull sequoia]

Hmm

[kind helm]

because you dont have wire so its pressing lower than you normally can

[tawdry tree]

When you have it like this, where does it touch the keycap?

[tawdry tree]

Oh yeah, true actually.

[dull sequoia]

But even then why should it stop the keycap from raising up? Especially when you can actually do it by hand

[tawdry tree]

Because of friction somewhere.

[kind helm]

which is the reason why i thought its lube related

especailly since it slows down not a rough stop, but idk

i trust thackson's experience :3

[tawdry tree]

Josh, your black stabs are TX APs?

[kind helm]

yea

[tawdry tree]

Odd af

[kind helm]

let me double check

think should be tx ap

[tawdry tree]

Another fuckin stab mystery, as if we didn’t have enough already 😭😭

[kind helm]

i only used 2 platemount, 1 is txap the other is wooting's own platemount

[dull sequoia]

Well guess I have to install and check again

But this is smooth, no friction

[tawdry tree]

Hmmmmmmmmmmmmmmmmm…….

[kind helm]

pop the wire in there, but dont put in on pcb, do what i did

should show if there is any issue from just key cap with stab

[tawdry tree]

If you really don’t mind, I have one more request. Install two in the plate, and make a picture from above (without the keycap on).

[tawdry tree]

Are yours lp?

[kind helm]

yea

[tawdry tree]

Man

Too many stab mysteries. 😭

[dull sequoia]

Damn stupid with a phone... anyways:

[kind helm]

looks like the stab works ngl...

[tawdry tree]

What if you press a bit harder on the housing?

[dull sequoia]

No time to put it in right now sadly. I should not spend that much time on it right now tbh 😄
Maybe the wire has an issue with the PCB? No idea. Really weird

[kind helm]

maybe the "guide" is grazing the tape?

[tawdry tree]

It does look like his stab stems go further down than yours

[kind helm]

another time then, fun time flies

[ornate kiln]

are ttc kom/pom switches compatible with wooting? i dont see it anywhere in the sheet

[tawdry tree]

Haha it’s fine. Thanks a lot. We may not have found the cause yet but hopefully soon.

[kind helm]

faq is outdated (though everything on there is still true)

[tawdry tree]

I’ll try to get a pair as well.

[tawdry tree]

Yes.

[dull sequoia]

Maybe I will have time later today, not sure. I will let you know

By the way, the only weird thing when installing was that they baaaaarely fit. It is very tight and you really have to push them into the plate hard

[kind helm]

that is good

[tawdry tree]

That’s it. They’re too wide.

[kind helm]

tight fit = less wiggle room

a little bit of lube brush on to the slide thingy on the housing makes it easier

[dull sequoia]

Too wide? I mean when they are in they looked fine and I can raise them by hand easily

Anyways, I will try to find the time and make a picture etc

[tawdry tree]

If you get around to installing them, check if the plate “pins” next to the stabs bend like this:

Ignore the red rectangle.

[kind helm]

tf?

how does that happen

[tawdry tree]

This is the case for all TX AP PCB mounts but I wouldn’t expect their plate mounts to suffer the same issue.

[kind helm]

hold on

[dull sequoia]

We are talking about a Lekker Edition, so no

[tawdry tree]

They’re too wide (6.80mm) compared to the hole (6.65mm) which pushes them off center and creates friction.

[dull sequoia]

Nothing bendable

Damn I need to clean

[kind helm]

i guess a little bit

[tawdry tree]

Aluminum plate, will be hard to see. It’s still possible.

[dull sequoia]

Okay

[tawdry tree]

THAT’S FUCKING IT

[kind helm]

it is normal, you never see it until you open it up

[prime orbit]

So my shit is just gone

Great

6 days ago same place

[tawdry tree]

It’s less of a problem on plastic plates because plastic bends. Alu is stiff so that doesn’t happen and the stabs just get pushed.

[kind helm]

nah i dont believe, i dont have alu but i have fr4 hold on

man i am starting to wander why i have so much shit

do i actually have a problem

[prime orbit]

Like what do I even do

I’m just cooked

“It’s a little late. In transit”

The last week 😭💀

[kind helm]

usps people are pretty good, if the address is right they may find you eventually

[tawdry tree]

Put a keycap on them and see if they feel smooth. FR4 is stiff enough so should be able to tell if that’s the issue.

[prime orbit]

It was supposed to be delivered on the 6th.

Expedited shipping and everything

[kind helm]

i mean i use that set of stab on fr4 before

[prime orbit]

I want my $3 back 😭😭

[kind helm]

that is what i did to my salvation

[tawdry tree]

I’m gonna get some and try them on the steel plate.

Woot’s steel plate

[tawdry tree]

I genuinely believe nothing changes with expedited shipping.

It’s just paying to get scammed.

[prime orbit]

Wow

💀

Noted for next time

So basically I lost my items, money, and IQ for paying for expedited

Lovely

[tawdry tree]

Only for DHL, that does change something but it’s also triple the price most of the time.

[tawdry tree]

lmfao

[prime orbit]

Yeah for me dhl is minimum $35

[tawdry tree]

It’s UPS’ fault.

[prime orbit]

True

[tawdry tree]

DHL’s prices can get a bit insane.

Fine?

[kind helm]

i mean i was spamming it as fast as i can

[tawdry tree]

or not fine?

Is it smooth?

[kind helm]

so i say that is smooth

[tawdry tree]

Alr

[kind helm]

i think depends on location, same 5 dollar shipping through usps novelkey gets to me 2 days, divinikey 5 days. the expensive ones probably go through air plane, which is like additional process to go through checks and stuff

international DHL 40 dolla worth to me got my venom from china in 5 days

[tawdry tree]

Only DHL for me has ever shipped fast. All other couriers here just take their time, regardless of expedited or not.

DHL (express I think) for international is extremely fast but insanely expensive as well if it’s from anywhere other than China.

[kind helm]

i believe that, on superbuy where i brought my pcb, they show a list of shipping companies and expected ship time and actual ship time. DHL is solid af

[tawdry tree]

Yeah definitely

[inland jetty]

my wooting80he got postponed like 6 days in a row from 'arriving today". 3 weeks late. thts just how it is atm. sucks

[kind helm]

my novelkey stuff got delayed too due to snowy season

it is what it is bb

[royal swan]

Hello, I need help removing the pcb with the friction pad from my case

[flat cobalt]

Too lazy to transfer switches @sacred elm

[sacred elm]

yummy

[flat cobalt]

I honestly don’t remember what I did to my regular jades the green ones

[random hull]

spacebar here any minute now. really hope it wont rattle, its an issue i dont really know how to fix. im terrible at balancing the wire and possibly will make it worse

[sacred elm]

is it the legendary day you will receive the jis spacebar

[sacred elm]

probably collecting dust somewhere

[flat cobalt]

https://tenor.com/view/cat-scared-gif-27466237

[random hull]

yep finally rofl, after 6 weeks or something

exciting

[flat cobalt]

Oh the baby space bar?

[random hull]

yeah hahaha

[flat cobalt]

[rich mesa]

Add lube to the stabilizers

[random hull]

i did do that yea, that felt like the only thing id be willing to do, i gave up on an attempt to balance it

[split dagger]

W?

Going to revamp my wooting im bored of the current look

Idk if I wanna get a white case tho bc rn I have the black version

[stone flax]

How much was that sumi for

[split dagger]

100$

[stone flax]

Sealed?

[split dagger]

No the box is open but there never been used just opened it to take pics

There are sealed ones for 100$ tho

Theres a couple

[flat cobalt]

@sacred elm I found them

[vapid oracle]

Jade pros 😜

[prime orbit]

Pc plate and friction pad

Easy w

[flat cobalt]

Idk what keycaps to use

The peaches N cream are really pretty hadn’t opened the box until now

[quasi hinge]

Use em

[kind helm]

what happened to your name gamer?

[quasi hinge]

Huh?

[kind helm]

nvm for some reason my dc has stream mode on

it showed a....

xD

[quasi hinge]

….

[kind helm]

[quasi hinge]

[flat cobalt]

I wore down my space bar super fast ;3;

I legit always hit the same spot

[vapid oracle]

https://kbdfans.com/products/pbtfans-atomic-purple

These any good ?

[lunar burrow]

Does anyone know how to install the stock stabilizers back . I just remove the pcb from the switch plate to install my new switches. When I put the pcb back and test the switches with a few keycaps, only the ones with stabilizers are getting stuck and not coming back up

[stone flax]

https://youtu.be/6Yz-UzTY8_I?feature=shared

[random hull]

how does this sound for anyone that has an ear for it, just spacebar, dont really think i hear rattle myself, i did lube those housings as well as the wire

i have the foam for spacebar but i didnt use it yet

[sacred elm]

sounds normal

congrats on your spacebar 😆

[vapid oracle]

https://kbdfans.com/products/pbtfans-atomic-purple

Thoughts anyone???????????

[south swallow]

These are fire and now I kind of want them for myself

I have been looking for keycaps and I’ve never found a set that I’m happy with but these do look nice

[stone flax]

Jis?

[tropic urchin]

Sounds like a space bar so should be good

[austere creek]

i wish it was actually atomic purple

slept a night on it and im still mad

[random hull]

yea

[vapid oracle]

What’s it suppose to look like???

[random hull]

alright cool.. wonder how many layers of the foam i should put into the spacebar

[flat cobalt]

[austere creek]

not having a white plastic layer behind the see through bit

[vapid oracle]

True I can see that

[tropic urchin]

If you like how it sounds currently, I wouldn’t. If it gets too sharp then I would put a little bit.

[random hull]

ive already got it so kind of want to experiment i guess

dont know if it leaves a lot of residue and such

[tropic urchin]

Can’t hurt

Doubt it will leave anything crazy, it should fit into the crevices of your space bar and stick in there

Little thicker but should look like this

[random hull]

thanks, gonna give it a shot

[flat cobalt]

Gonna use these for now

[flat cobalt]

It’s complete

[kind helm]

i tried so many things, thick lube, light lube, more lube, less lube. ** it is still kinda fucked. ** My brain is fried at this point. @fluid ravine @calm pulsar

[random hull]

it finally is 😹

[calm pulsar]

can't hear it that well but there is a certain percentage of the badness of it that one can deal with
cause nothing is perfect and also you might be oversensitive due to how good you want it to be 😄

doesnt sound horrible in the video tbh

[tropic urchin]

I think you may be losing your mind bc I can’t hear anything

[kind helm]

i lowkey am ngl

[tropic urchin]

That’s the problem with being too deep into modding at a certain point you fall off the cliff of sanity 😅

[calm pulsar]

yeah just try typing with it, do a couple of monkeytype tests

also tsangan layout looking great

[vapid oracle]

Heard nothing haha

[tropic urchin]

Has a nice color contrast

If we discount the softness of the video all 3 parts of the space bar sound identical so worst case the entire thing is chalked or is ok, but I’d lean towards ok

[kind helm]

it is the fact that everything else is great but the spacebar that drives me nut

[tropic urchin]

Space bar is a little softer than the rest, but I’d just let it go imo

[kind helm]

let it go, let it goooo wooo~~~

[quasi hinge]

Blacklight

[kind helm]

i love the 2 ctrl ngl

so beautiful on this layout

[calm pulsar]

yeah and I've grown so much to the tighter winkey (being 1u), that I really miss it now

[calm pulsar]

yeah there is a bit less cleanliness in the spacebar but I would just chill at this point, give it some time and you can try later
also keep in mind 7u spacebar is a tiny bit harder to tune so you can just try tuning a bit more later

[hearty path]

Hello
Can any one help

[stone flax]

What r you trying to do

Where r u from

[fluid ravine]

What happan?

[hearty path]

I want to get a plate that will fit my 60he+ to install Tx ap screw in

[stone flax]

where ru from

[kind helm]

weak boi spacebar me can't fix

pain my friend

[fluid ravine]

You want it to sound stronger or smth?

[kind helm]

yeee a bit of stronger top out

[fluid ravine]

Switch?

[kind helm]

raws

[fluid ravine]

Hmmm

What stabs

[kind helm]

yikb

[fluid ravine]

LP?

[kind helm]

geon spacer

[stone flax]

Take off spacer

[hearty path]

Uae

[kind helm]

give me a moment

[fluid ravine]

Have you tried jade pro as well?

[kind helm]

voodoo magic

still not my fav but much better

[kind helm]

trying to keep the same switches

[stone flax]

Remove lube from switch

The top housing and parts of stem that makes contact there

[fluid ravine]

Mk
Well just give it a try

Different results maybe

[kind helm]

that i tried, yee its pretty good, made it a bit more snappy

in the last test when i swap to a thicker lube on the wire i put back the lube on the switch

that result with no spacer is similar to the result with heavier spring (i swapped to 60g spring from lekker's) but supprisingly without the spacer it sound cleanest out of the tests i did

[kind helm]

give me a sec

for me, jade with no spacer is better than raw with no spacer

but probably gonna stick with raw since its like different rather than being cleaner

[true dove]

Ive seen these keycaps before

They looked nice but I was searching for something else

[tropic urchin]

I think this new space bar sound fits better with the alphas than raw with no spacer imo (non biased opinion)

Sounds more balanced together

[kind helm]

i agree, but i am going with raw :3

thank yall ❤️

satisfied

[hasty creek]

whats the difference in gateron white pro and jade pros?

[tropic urchin]

The white G pro switches?

https://www.gateron.co/products/gateron-switch-set if you’re talking about these looks like it’s mechanical

[hasty creek]

im looking at a keyboard and for some reason they never seem to get the names right or whtvr

[tropic urchin]

I’ve genuinely never heard of the white pros but they look to be mechanical switches and not HE

[hasty creek]

i mean its on a he keyboard so i think they got the name wrong

[tropic urchin]

Send a link if you can, the only ones I found stated they were mechanical /shrug

[hasty creek]

https://www.luminkey.com/products/magger-68?variant=49368245174548 i was just snooping around for a cheaper board idk if i'll buy it yet

[tropic urchin]

I think these are the switches?

https://www.gateron.com/products/gateron-ks-20-magnetic-white-switch-set?VariantsId=10680

[hasty creek]

they look the same to me, but idk much abt switches or he

[hasty creek]

btw do you know if they're trustworthy i've just seen youtube reviews and i dont trust many sites

[tropic urchin]

In terms of the KS-20s or buying from Gateron directly

[tawdry tree]

A local CNC service?

[hearty path]

This is the link https://www.keebzncables.com/products/group-buy-plate-mates-cutting-service

[tawdry tree]

They state they’re unable to make any changes to the file. I’m not sure if there’s a file for just the plate already. I know there’s one for the frog.

[kind helm]

i think it is this board specifically, because the stab i pull from another build that was fine to me. and that set of raw i always been happy with. but yee glad everything worked out. W chat

[calm pulsar]

yeah seems mj's tips were really good

[hasty creek]

anyone know any switches that sound ssimilar to novel key creams, they dont gotta be HE

[harsh dove]

Sounds good dude stop trippin

I used to think my spacebars were never good either

[fluid ravine]

Me with bone dry stabs

[glacial wind]

Wouldn’t be the first time we’ve seen perfectly fine spacebars where people think they still need to tune it

[kind helm]

think my brain was fried once i put down like 2 hours on it, then it just went "well maybe now i can try this too"

[glacial wind]

Some board combinations the switch sound can sound like rattle too

like raw he specifically in the 80he space bar can sometimes sound close to a rattle just due to the pitch

[kind helm]

that is how i felt, because my spacebar never sounded like that on tofu redux or salvation

but i can't believe myself so i just kept trying to maybe kinda recreate the sound

[glacial wind]

I just swapped my raw he switch for another switch in space only

[harsh dove]

Yeah I used to spend a lot of time trying to get my frog mini spacebar to sound good

[hasty creek]

anyone know a good replacement cable that still does 8k polling rate?

[uneven thunder]

My dumbass thought the mouse was the jades

The jades sound really good

[sacred elm]

lol

[uneven thunder]

Can’t decide if the like the jades or raws more

[uneven thunder]

Coiled?

[hasty creek]

yeah

[sacred elm]

wooting coiled cable

[uneven thunder]

It just won’t work for tachyon mode for 80he

I think

[sacred elm]

what

It does 💀

[uneven thunder]

Oh I saw on Reddit that it didn’t

Guess the guy is wrong

[sacred elm]

lol

[tropic urchin]

Depends on how much you like RGB and your budget imo

[uneven thunder]

I just use white for my rgb

[tropic urchin]

If you want pure whites then prob RAWs

With Jade pros it’ll darken your RGB and will make white look a little more blue, and yellows a little more neon green due to the upper housing tint

[south swallow]

https://a.aliexpress.com/_ExS1cLi I’ve been looking at these clear TTC Magneto’s

[uneven thunder]

I dont mind a blue tint

[uneven thunder]

Are they more clacky or thocky?

[cyan lark]

Magnetos are max clack

[uneven thunder]

Ah ok

[tropic urchin]

How’s your budget looking for them? RAWs will usually be a little bit cheaper than Jade pros ($43.2 per 90 vs $71 per 90)

[uneven thunder]

I’m more of a thock guy

[uneven thunder]

I’ll only be buy around 70 for my 60he and my budget is around 50

USD

[tropic urchin]

Jade pros would be $56 then

[kind helm]

just get raw ™

[uneven thunder]

Are they more clacky or thocky compared to raws?

[uneven thunder]

Are they that good?

[tropic urchin]

They’re both clacky

[kind helm]

jade pro is slightly deeper

[tropic urchin]

Thock doesn’t exist really, but there’s some hair splitting differences between the two

[kind helm]

yes

[uneven thunder]

A see a lot of people saw they are the best

[kind helm]

not best (no best) but really good

[tropic urchin]

It’s between Jade pro/raw for preference for top non boxstem switch

For clack enjoyers atleast

[kind helm]

~~ ttc is gamer copium~~

[uneven thunder]

What’s the closest I can get

[tropic urchin]

Dead zone difference is interesting but I think it’s same as 8k polling cope imo

[tropic urchin]

If you want muted then definitely lekker V2s

My honest opinion is to get whatever you think sounds best, I’d try to forget about thocc or whatever the latest buzzword is and focus more on what you value for your board

[uneven thunder]

Yeah true

[kind helm]

whatever sound "good" and within budget is best

[cyan lark]

Don’t be reasonable varedis

[uneven thunder]

Tbh what I really need is to get a new plate to get rid of the ping from the stock one

[tropic urchin]

Because you can always replace your plate to suite your sound preference too

[kind helm]

best changes

[polar girder]

I gave up on sound and just trying to find cleanest/best performing

[tropic urchin]

Sorry my bad.. JADE PROS SUPREMACY!!!!!!

[polar girder]

HE sound is garbage for me

[kind helm]

my best a year ago pretty much upside down to now

[cyan lark]

You mistyped KoM.

[agile grove]

the HE switch game is one I force myself not to play

[cyan lark]

That’s just smart

[tropic urchin]

TBH if you want “thock” get a softer and flexible plate and get RAWs and call it a day

[agile grove]

at this point the development is so rapid that mere months after the “best switch” releases there’s already a “better” one

[uneven thunder]

Yeah I’ve been thinking about that

[tropic urchin]

Cheap solution to a problem that won’t be fixed with other switches

[polar girder]

lol I would not put Raw and Thock in the same sentence

[cyan lark]

Plus once tactile HE becomes good all bets are off

[uneven thunder]

I’ve been considering an fr4 plate is that good?

[tropic urchin]

If you pair it with pc plate it cancels it out and makes it less clacky

[kind helm]

#🔧│keyboard_modding message tofu redux raw
THOCK HE

[polar girder]

Ok fine I’ll go raw and pp plate and see if true

[agile grove]

I would not put thock and HE in the same sentence, you sorta gotta take what you can get.

[cyan lark]

I should install fr4 for my KoM build this weekend…

[tropic urchin]

You won’t ever get true thock and its a waste of time trying to go for pure thock

[polar girder]

Yeah exactly

[polar girder]

Yeah this

Forget your ideals of thock

[tropic urchin]

You can only get good enough and the RAWs on PC plate definitely wasn’t super clacky for me

[uneven thunder]

I like that creamy sound

Idk if that’s the correct term

[agile grove]

I have an amazon giftcard from christmas and don’t know what to spend it on. might get some raws if I can find them cheap enough.

[kind helm]

get dunk on

i am in us, so that whole build is definitely reproducible.

[polar girder]

Yeah I’m going try to cop venom and raw during upcoming sale

[agile grove]

plus I can return them if I don’t like how they sound

[polar girder]

Ok fine

Pp or nylon tho

Rrrreee

[kind helm]

can we get both

[polar girder]

I have both rn for bk

Just need to test

Don’t want to buy both for venom tho

Just want one

[kind helm]

my perspective is nylon then

because if you feel like playing pp you can go back to wooting whenever

[uneven thunder]

Same day delivery so I honestly might just say fck it and try them

[kind helm]

where you at west or east

[uneven thunder]

West

[kind helm]

https://divinikey.com/products/geon-raw-he-linear-switches?variant=41630581981249

probably get to you within a week

[tropic urchin]

If you end up getting jades I’d recommend also lubing them, will make them temp deeper and then once the pitch goes back to normal it’ll have a more fuller sound to them after

[kind helm]

their storage in cali somewhere

forgot where exactly

[uneven thunder]

I can’t decide if I should get a plate or switches first

[kind helm]

switches + plate pretty much similar price as getting jade pro

[uneven thunder]

Keyboard modding is so expensive 😵‍💫

[kind helm]

:3

[uneven thunder]

True

But I’ll have to wait forever for aliexpress to deliver it

[kind helm]

oh man get out when you can

[uneven thunder]

Not really a problem just an inconvenience

[kind helm]

use the link i sent

[uneven thunder]

Talking about a plate

[uneven thunder]

Hopefully after I upgrade my wooting I’m done

[kind helm]

https://divinikey.com/products/kbdfans-wooting60-he-compatible-plates?_pos=1&_psq=wooting&_ss=e&_v=1.0

nvm

out of stock

fck

[uneven thunder]

Actually

Since I spent $130 this month already on keyboard I might just wait for it to go in stock on divinikey to order together

[modest wave]

Ali express

[kind helm]

not sure if they will restock the plate, you can ask through email or their dc i think

also raw may go out of stock actually, people love them

[uneven thunder]

Fuck

[kind helm]

not sure if people are as crazy about them these few months

but like last year it went out of stock pretty fast (i think, i was able to get mine, but some other people went there and check find out of stock)

[polar girder]

lol no

I would sell Wooting

I don’t want more than one keyboard

[kind helm]

it is not a keyboard, it is a pcb

you just need a little box for the pcb and the plate

[polar girder]

Probably rather sell it lol

Not sure the point of having both PCB

One on standby?

[kind helm]

your choice bb i am just yappin

[polar girder]

Useless

[fluid ravine]

Same

[sacred elm]

https://aliexpress.us/item/1005006050178592.html?gatewayAdapt=glo2rus&sku_id=12000038605224474

just order fr4 from keyboard fun store

its white and without weird flex cuts too

[gusty wadi]

Since I’m from the uk and I bought the base 80he, it’s American style, if I just buy key caps will they fit on the keyboard if they’re the uk ones?

Idk if I sound dumb asking that

[proven wadi]

Geon Raw are really good 🙂

[reef oar]

no

if you bought US ANSI layout then you'll need US ANSI keycaps

because UK ISO has a different enter and a couple other different keys

[gusty wadi]

Ah I see, and do I need like specific key caps? Or will any be compatible, I never done anything like this before

[cyan lark]

You want ANSI keycaps

If you bought an ANSI layout board

[reef oar]

any ansi keycaps work as long as they're mx stem

which is basically every keycap set ever for mechanical keyboards

only switches i know of that aren't mx are like

alps

and topre

[cyan lark]

Rubber dome, buckling spring

[reef oar]

i think if you have a rubber dome keyboard you're probably not buying aftermarket keycaps for them

[cyan lark]

Pretty academic though, no site is selling these.

[reef oar]

yeah

so basically any us ansi set you find is gonna work

you probably wouldn't find the sets that wouldn't work unless you searched for them specifically

[uneven thunder]

did these just come out?

[stone flax]

been some weeks

[uneven thunder]

home come i cant find any videos on them yet

[cyan lark]

#🔧│keyboard_modding message

[uneven thunder]

yeah i prefer geon raws

not bad tho

[cyan lark]

You're welcome.

[gusty wadi]

Ah right, I see. I have the default 80he, nothing was changed so just look for ANSI keycaps that are mx stem

Appreciate the help from you and @cyan lark

[stone flax]

divinikey has now stocked venoms

[strange quarry]

mane i wanna buy raws but all the gift money i got is on amazon

jade pros are an option i guess

[chilly mural]

yay, venom becoming internationale

It takes a month since tiger lite gaming's page is up to show MY's vendor.

I already pre ordered on SG tho

[cyan lark]

Oh I didn't realize there was a TKL venom, thought it was 60 only.

[chilly mural]

yesh, tkl option is nice for somebody that can't decide between 6.25u and 7u

[sacred elm]

get them

[strange quarry]

is it a substantial improvement from the old jades

[reef oar]

jade pro master race

[tropic urchin]

I didn’t buy the OG jades, but they have less stem wobble + they have a longer spring for improved rebound and feel (for the same price). I did however like them more than RAWs, but can’t go wrong with either.

They will make your RGB darker/ make yours whites more blue and yellows green if RGB is important

[strange quarry]

i don't use rgb at all, so that's fine

[reef oar]

i have tried both, and the answer is not SUBSTANTIAL, but the difference is noticable, and the price isn't even extra in some places

jades are kinda pointless at this point when pros exist

[tropic urchin]

I’d get them then, they should serve you well. And they’re a lot easier to remove than RAWs

[reef oar]

though if you're in the uk i could probably send you 70 jades for cheap

[tropic urchin]

I’d recommend lubing them but feel free to try them stock and see how you like them

[strange quarry]

i was asking cuz i have the old jades in my board, they're alright but i was curious about the pros

nah i'm NA

[reef oar]

oh okay nvm then

jades are still good

[inland jetty]

i ordered them with my 80he but ended up getting the pros as well xD. I have the jades on my 60he ❤️

[tropic urchin]

You could try buying a 5 piece of Jade pros off aliexpress and see if you think it’s a noticeable difference for the rest

Would be a decent option imo if you don’t mind waiting for them if you end up liking them

[sacred elm]

Pros are an improvement for sure, both sound/feel

they feel smoother and sound cleaner

[strange quarry]

that's all i needed to hear

probably gonna pick em up

[reef oar]

yeah

then just sell the jades

or let them collect dust forever

[inland jetty]

idk if anyone will buy them

[tropic urchin]

I think my favorite part is the longer spring, feels nice

[inland jetty]

just use them on another board, i like them xD

[sacred elm]

its not a massive improvement tho, but still

[reef oar]

i wonder why they made the top housing teal like that

like surely they knew it would tint the rgbs

it's like the only actual negative

[tropic urchin]

Gateron wanting to be different probably

[sacred elm]

i have jades on my 60he and they feel doodoo ngl, they probably need lubing

[tropic urchin]

They should’ve just merged the maxes and pros into one idea and just made Jade pros as transparent as possible without having everything be PC

[reef oar]

ong

[inland jetty]

i like it on my 60he lmfao, unlubbed as well 9or factory lube)

[tropic urchin]

But no we need 10 different switches even tho Jade pros sound the best out of their lineup now

[reef oar]

jade pro v2 incoming?

[tropic urchin]

I’d rather see Jade gaming not sound like ass personally

If they got it towards Jade pro levels with better stability that would be pretty sick

[knotty iron]

yeah jades are still a good switch I agree

there are better options but they are no slouch

[reef oar]

jades would be considered decently good if pros didn't exist i think

but the existence of pros kinda makes the jades fall off

[inland jetty]

i think they are great value if someone is trying to get rid of them

[reef oar]

it's like the guy she tells you not to worry about

[tropic urchin]

RAWs would have better stability over normal jades which is why they made the pros I think

[sacred elm]

I still think regular jades are better than lekker v2s

[tropic urchin]

Versus having it be a toss up between raw and pro atm

[sacred elm]

lekker v2s were a bit disappointing

[reef oar]

i didn't use lekker v2s for long so i don't really know

[sacred elm]

i swapped them in a week

[inland jetty]

lekkers are just silent

kinda different sound wise

[reef oar]

only problem i had with lekkers personally was the keycap wobble was insane

my keycaps felt loose

[sacred elm]

yea stem wobble is a problem

[inland jetty]

the most noticeable for me was the 3.5 vs 4.0

[tropic urchin]

I remember the OG jades were the only reason I went module back in the summer💀

[sacred elm]

sure there is improvement but its kinda like lekker v1.6 and not v2 lol

[tropic urchin]

Hearing the difference was a “oh hell no” moment

[sacred elm]

I can send you my lekker v1s you will love them @tropic urchin

[flat cobalt]

I just bought the lekkers and never used them

[inland jetty]

ur gonna have aids listening to this one, check this one out lmfao.

[tropic urchin]

Send them to spoit he might need em

[sacred elm]

he already has them

😭

[tropic urchin]

He’s probably broken a few switches

From overuse

If anyone has hit the 100m keystroke limit it’s him

[sacred elm]

lol

[tropic urchin]

That dull rattle kills me

[tropic urchin]

That mfer needs to swap his switches fr

Idk how he can hype up the Jade pros in his new keyboard and then not get them for his 60HE is beyond me

[sacred elm]

that keyboard is good

his new keyb

[inland jetty]

now this

[tropic urchin]

I’m going to have to tell him to swap a few switches and wait like 45 mins for a read

[sacred elm]

but i think optimum 60he with jade pros will be peak, potentially other plate too

[inland jetty]

this is gonna get the magnetos first lmfao. tray mounted and everything.

[tropic urchin]

As much as I don’t like magnetos, if you lube them they should easily clear the lekkers

Hopefully that sharpness doesn’t return 😭

[inland jetty]

pain for u, but i like it lmfao. I like my keyboard, just like my playstyle, agressive 🤣

[sacred elm]

its either magneto pom or nothing, regular magneto and rgb versions are poop

[tropic urchin]

You’re right it is very aggressive

[cyan lark]

Incorrect

[inland jetty]

i wanna hear that slam, that space bar, as my rage builds up

then the slamming escape key to quit the game LMFAOOO

[cyan lark]

Haven’t tried rgb but ogs are good as well

[sacred elm]

Sno posted soundtest, pom version sounds a lot cleaner

[tropic urchin]

You trying CF plate for that aggressive play style?

[cyan lark]

I own(ed) both 🤷

[inland jetty]

sound wise, yess, I want it loud

[cyan lark]

Firsthand opinion best opinion

[inland jetty]

testing on both 60 and 80he

[tropic urchin]

CF is definitely the way to go for 95% max loudness

It makes my Jade pros sound like mini TTCs

[inland jetty]

i know that spacebar was killing you, like everyone else hahaha but for some reason i really like it (it just needs some foam, if i want to eliminate the hollowness, pingy sound)

[tropic urchin]

I think I wore out the lube on mine which is why it went back to default gunshot sound

It sounded decent then “what the fuck is that sound”

Not my cup of tea but respect for the max clackers in chat

[cyan lark]

On your pros?

[sacred elm]

If I ever get my plates...

[tropic urchin]

Yeah

[sacred elm]

https://tenor.com/view/angry-thiago-mad-angry-fist-emoji-gif-17761307

[cyan lark]

Damn you must be clacking away

[inland jetty]

its the perfect description and i love it lmao

[tropic urchin]

I think it was bc I changed my switches after FR4 so my other switch went somewhere else in my board

[sacred elm]

what if you max overlube it for spacebar

[tropic urchin]

It’ll sink like a weight in quick sand

I’ve felt it before it’s terrible 💀

[tropic urchin]

This

[sacred elm]

alright, then you need lekker v1 for your spacebar

[inland jetty]

i just want you to know that you inspired this madness. I was doing it for memes until i actually tried it for gaming, just to be funny and i enjoyed it @tropic urchin

[tropic urchin]

Nah just foam for when it get dry

[tropic urchin]

Well at this point I am partially mad so I’ll take it in full stride

[inland jetty]

you were the inspiration and this fine, gentleman is the enabler. you'll be hearing from me again soon lmfao

[cyan lark]

I’m sorry

[inland jetty]

we're gonna have a nice sound test playing marvel rivals

[high sphinx]

What is hes new one ?

[sacred elm]

whos your main 😳

[tropic urchin]

Sikakeyb I believe

A random Chinese HE board it seems for similar price as 80HE

Think he wanted it for 0.02 RT

[inland jetty]

oh sir, you are doing gods work lmao.

[tropic urchin]

I guess I’m the artisan + clack enabler yeah?

[inland jetty]

i, just recently started playing but uhhh, scarlet 🙈

[sacred elm]

[tropic urchin]

That should be my new title tbh

[cyan lark]

Certainly are the only person to get me thinking about artisan

Most look silly to me but those stones 🤤

[high sphinx]

Oh yeah i know that board there is a overwatch player who pmays marvel rivals now and he uses sikakeyb as well is it good actually ?

[sacred elm]

yea

[inland jetty]

ali express companies are taking notes, im praying they get mass produced very soon. 😆

[cyan lark]

Don’t join him in trying to convince me 😭

It’s the end of the week and I’m feeling weak

[inland jetty]

oh my god, the church must feast

[chilly mural]

wtf

[tropic urchin]

Dunno. I wouldn’t try to min max fastest after a certain point. It’s extreme diminishing returns and the ppl going after it mainly are pro players chasing fractions and fractions of a second

[inland jetty]

someone post a nice artisan keycap picture 🙊 😂

[tropic urchin]

You know you want the real shit over cheaper resin caps 😈

[high sphinx]

Bur is the venom not better than the sikakyeb either way ?

[tropic urchin]

You’ll have to ask the venom church

[sacred elm]

Well wooting is releasing 0.1rt soon, and maybe sometime in future we can get 0.05rt or something who knows

[tropic urchin]

Idc about venom

[inland jetty]

i know exactly how you feel, i have keycaps on cart right now and im itching to get them across to check out but i shouldnt LMFAO

[high sphinx]

Oh ok

[tropic urchin]

Just an 80HEr in a sea of venom

[high sphinx]

Yeah i know the venom does not have the 0.01 rt but it has like super good deadzone and best latency

[cyan lark]

Yeah caps are brutal. Can only wear one set at a time and there’s so many good looking ones.

[tropic urchin]

But my personal advice would be to just stick to 60HE/80 depending on what you run currently. Otherwise you’ll lose yourself trying to find the fastest every few months

[inland jetty]

thank you

[tropic urchin]

Pretty soon it’ll be 0.000001 RT

[high sphinx]

Yeah

[tropic urchin]

Would be kinda sick

[inland jetty]

at that point, ur focusing more on ur equipment than actually having fun palying the game

[sacred elm]

gpster dont you have wooting

[high sphinx]

Yeah but i wanna swap to a qwerty board that had 60 percent since more customization

[tropic urchin]

Even my 80HE feels overkill for a lot, I can’t fathom the endless chase after a certain point

[chilly mural]

and later it'll be plank length!

[chilly mural]

80he is all that you need.

[inland jetty]

but sir, instead of only having 2ms delay, you will have 0.0012313ms, dont you want that? dont you FEEL it?

[sacred elm]

wooting has 0.15 rn

[tropic urchin]

0.125 feels like I have a perpetual coffee enema, anything more will lead to misinput and or an ER visit

[sacred elm]

No dude! your 80he has 0.21ms latency, venom has 0.16 smh

[sacred elm]

get venom!!

[tropic urchin]

Benom HE

[inland jetty]

YES YES YES!

[flat cobalt]

[sacred elm]

what?

[cyan lark]

See no, I don’t want the scariest monster in cinema history (next to The Thing) greeting me every day

[tropic urchin]

Artisan party

[cyan lark]

Varedis sees my weak point

[tropic urchin]

Must have shiny

Much precious

[sacred elm]

When eyejoker tested 80he it was 0.21ms latency with alpha firmware, it might be even lower now because there were many firmwares after that

[tropic urchin]

I ALMOST got the one you are eyeing

[inland jetty]

yep, xD I'd rather them focus on the other aspects of the board that can truly make a difference.

[tropic urchin]

But the salmon nigiri was too much

[cyan lark]

The one I was eyeing seems to be gone 😔

[inland jetty]

lets find him a clone LMAO

[cyan lark]

Not that I just looked

[inland jetty]

someone on etsy will make it for you for $50

[tropic urchin]

I’d try emailing Carter, each is a 1 of 1 so he could prob make one for you

[inland jetty]

😂

[tropic urchin]

For real gems $50 ain’t getting you much

[inland jetty]

some of them are probably drop shipped tho lol

[tropic urchin]

Unless you want a pyrite keycap

[inland jetty]

are you guys actually wanting to get this man to buy artisan keycaps with real gems

were not talking resins?

[tropic urchin]

Nah I got convinced by GMK cosmos for a real opal artisan

[cyan lark]

The caps whispered to you?

[inland jetty]

shit, the church has spoken, its @cyan lark turn, the church must feast LMFAO

[tropic urchin]

Mine is a Bello opal with lapis lazuli center

Which matches my GMK lazurite caps

[sacred elm]

many people order it, wooting isnt a very big company to have it always in stock

[tropic urchin]

Technically it was thockfather but close enough

That literally goes for all plastic keyboards too in this price range. If you look at the module breakdown the case is like $5-30

For PCR

[sacred elm]

Debatable, I would rather pay 30$ more than deal with some bs

[tropic urchin]

If you don’t want plastic just don’t buy it, it’s really simple

[sacred elm]

Module is the way

it still comes with a case tho

[inland jetty]

you should tell him to get a set of something like this but with real stones 😂

[tropic urchin]

They’re a little too snow globey for my taste but that’s the idea

[inland jetty]

it will end up looking like that eventually when you have too many

😆 jk jk

[cyan lark]

Jesus Christ

[tropic urchin]

Musicah really taking the piss rn

[inland jetty]

you dont know if you just smoked or its your keyboard

[vapid oracle]

wtf am i seeing rn hahaahha

thats crazy

[cyan lark]

Speaking of which it is Friday and I don’t think my mind can handle that pic sober

[inland jetty]

im not gonna like tho guys, it would be sick to have dragon balls made from real gemstones, i would use that for my f keys

assuming, im rich lmfao

[tropic urchin]

That’s tech

Gave me a new idea

[inland jetty]

oh god

[tropic urchin]

Probably won’t be realized but it’s a fun idea nonetheless

[inland jetty]

everytime we have ideas in this channel, we lose money 😂

[tropic urchin]

Goes for about any hobby. Atleast we’re not golfers

Have FUN with that

[inland jetty]

thats even worse

[tropic urchin]

Will never have another dollar to your name after that

[cyan lark]

Honestly didn’t know it was so expensive

[inland jetty]

its ridiculous, learned about it in high school

[tropic urchin]

What who doesn’t love $10k golf clubs

[cyan lark]

Mother tucker are you fooling

[inland jetty]

right? these poor people dont know man, tell em